local_router_id = "2.2.2.2",
ethernet_segments_count = "1",
filter_evpn = "1",
evpn = "1",
operational_model = "symmetric",
)
if _result_['status'] != IxiaHlt.SUCCESS:
ErrorHandler('emulation_bgp_config', _result_)
bgpIpv4Peer_1_handle = _result_['bgp_handle']
# Add EVI(PBB) stack on top of BGP
print "Add EVI(PBB) stack on top of BGP\n"
_result_ = ixiangpf.emulation_bgp_route_config(
handle = bgpIpv4Peer_1_handle,
mode = "create",
pbb_evpn = "1",
)
if _result_['status'] != IxiaHlt.SUCCESS:
ErrorHandler('emulation_bgp_route_config', _result_)
bgpIPv4EvpnPbb_1_handle = _result_['evpn_evi']
# Configure BGP Ethernet Segment stack
print "Configure BGP Ethernet Segment stack\n"
_result_ = ixiangpf.emulation_bgp_config(
mode = "modify",
handle = bgpIpv4Peer_1_handle,
active_ethernet_segment = "1",
esi_type = "type0",
esi_value = "1",
ethernet_segments_count = "1",
filter_evpn = "1",
evpn = "1",
routers_mac_or_irb_mac_address = multivalue_2_handle,
operational_model = "symmetric",
)
if _result_['status'] != IxiaHlt.SUCCESS:
ErrorHandler('emulation_bgp_config', _result_)
bgpIpv4Peer_1_handle = _result_['bgp_handle']
# Add EVPN VxLAN stack on top of BGP in Port1
print "Add EVPN VxLAN stack on top of BGP in Port1\n"
_result_ = ixiangpf.emulation_bgp_route_config(
handle = bgpIpv4Peer_1_handle,
mode = "create",
evpn_vxlan = "1",
)
if _result_['status'] != IxiaHlt.SUCCESS:
ErrorHandler('emulation_bgp_route_config', _result_)
bgpIPv4EvpnVXLAN_1_handle = _result_['evpn_evi']
# Configure BGP Ethernet Segment stack in Port1
print "Configure BGP Ethernet Segment stack in Port1\n"
_result_ = ixiangpf.emulation_bgp_config(
mode = "modify",
handle = bgpIpv4Peer_1_handle,
active_ethernet_segment = "1",
esi_type = "type0",
esi_value = "1",
ErrorHandler('multivalue_config', _result_)
multivalue_15_handle = _result_['multivalue_handle']
# Creating BGP Network Group
print "Creating BGP Network Group on Port 1\n"
_result_ = ixiangpf.emulation_bgp_route_config(
handle=networkGroup_1_handle,
mode="create",
protocol_route_name="""BGP IP Route Range 1""",
active="1",
ipv4_unicast_nlri="1",
max_route_ranges="5",
ip_version="4",
prefix=multivalue_8_handle,
label_step="1",
label_start=multivalue_9_handle,
enable_add_path="1",
add_path_id=multivalue_10_handle,
advertise_as_bgp_3107="1",
label_end=multivalue_11_handle,
enable_aigp="1",
no_of_tlvs="2",
aigp_type=["aigptlv", "aigptlv"],
aigp_value=[multivalue_14_handle, multivalue_15_handle],
)
if _result_['status'] != IxiaHlt.SUCCESS:
ErrorHandler('emulation_bgp_route_config', _result_)
# Creating a topology on second port
print "Adding topology 2 on port 2"