def test_query_utxo_set(setup_wallets):
load_test_config()
jm_single().bc_interface.tick_forward_chain_interval = 1
wallet_service = create_wallet_for_sync(
[2, 3, 0, 0, 0], ["wallet4utxo.json", "4utxo", [2, 3]])
wallet_service.sync_wallet(fast=True)
txid = do_tx(wallet_service, 90000000)
txid2 = do_tx(wallet_service, 20000000)
print("Got txs: ", txid, txid2)
res1 = jm_single().bc_interface.query_utxo_set((txid, 0),
includeunconf=True)
res2 = jm_single().bc_interface.query_utxo_set([(txid, 0), (txid2, 1)],
includeconf=True,
includeunconf=True)
assert len(res1) == 1
assert len(res2) == 2
assert all([x in res1[0] for x in ['script', 'address', 'value']])
assert not 'confirms' in res1[0]
assert 'confirms' in res2[0]
assert 'confirms' in res2[1]
res3 = jm_single().bc_interface.query_utxo_set((b"\xee" * 32, 25))
assert res3 == [None]
def test_sync(setup_sync, internal):
load_test_config(bs="bitcoin-rpc-no-history")
used_count = [1, 3, 6, 2, 23]
wallet_service = create_wallet_for_sync(used_count, ['test_sync'],
populate_internal=internal)
##the gap limit should be not zero before sync
assert wallet_service.gap_limit > 0
for md in range(len(used_count)):
##obtaining an address should be possible without error before sync
wallet_service.get_new_script(md, internal)
wallet_service.sync_wallet(fast=False)
for md in range(len(used_count)):
##plus one to take into account the one new script obtained above
assert used_count[md] + 1 == wallet_service.get_next_unused_index(
md, internal)
#gap limit is zero after sync
assert wallet_service.gap_limit == 0
#obtaining an address leads to an error after sync
with pytest.raises(RuntimeError) as e_info:
wallet_service.get_new_script(0, internal)
def test_tumble_tweak(destaddrs, txcparams, mixdepthcount, lastcompleted,
makercountrange):
load_test_config()
options = get_options()
options['mixdepthcount'] = mixdepthcount
options['txcountparams'] = txcparams
options['makercountrange'] = makercountrange
schedule = get_tumble_schedule(options, destaddrs, {0:1})
dests = [x[3] for x in schedule]
assert set(destaddrs).issubset(set(dests))
new_schedule = tweak_tumble_schedule(options, schedule, lastcompleted)
#sanity check: each amount fraction list should add up to near 1.0,
#so some is left over for sweep
for i in range(mixdepthcount):
entries = [x for x in new_schedule if x[0] == i]
total_frac_for_mixdepth = sum([x[1] for x in entries])
#TODO spurious failure is possible here, not an ideal check
print('got total frac for mixdepth: ', str(total_frac_for_mixdepth))
assert total_frac_for_mixdepth < 0.999
from pprint import pformat
print("here is the new schedule: ")
print(pformat(new_schedule))
print("and old:")
print(pformat(schedule))
# (which may be the most likely):
# (1) TLS clearnet server
# (0) onion non-SSL server
# so the third argument is 0 or 1 as per that.
# the 4th argument, serverport, is required for (0),
# since it's an ephemeral HS address and must include the port
# Note on setting up the Hidden Service:
# this happens automatically when running test/payjoinserver.py
# under pytest, and it prints out the hidden service url after
# some seconds (just as it prints out the wallet hex).
usessl = int(sys.argv[3])
serverport = None
if len(sys.argv) > 4:
serverport = sys.argv[4]
load_test_config()
jm_single().datadir = "."
check_regtest()
if not usessl:
if not serverport:
print("test configuration error: usessl = 0 assumes onion "
"address which must be specified as the fourth argument")
else:
pjurl = "http://" + serverport
else:
# hardcoded port for tests:
pjurl = "https://127.0.0.1:8080"
bip21uri = "bitcoin:2N7CAdEUjJW9tUHiPhDkmL9ukPtcukJMoxK?amount=0.3&pj=" + pjurl
wallet_path = get_wallet_path(wallet_name, None)
if jm_single().config.get("POLICY", "native") == "true":
def setup_wallet():
load_test_config()
btc.select_chain_params("bitcoin/regtest")
#see note in cryptoengine.py:
cryptoengine.BTC_P2WPKH.VBYTE = 100
jm_single().bc_interface.tick_forward_chain_interval = 2
def setup_tx_creation():
load_test_config()
def setup_snicker(request):
load_test_config()
def teardown():
if os.path.exists(TEST_PROPOSALS_FILE):
os.remove(TEST_PROPOSALS_FILE)
request.addfinalizer(teardown)
def setup_env_nodeps(monkeypatch):
monkeypatch.setattr(jmclient.configure,
'get_blockchain_interface_instance',
lambda x: DummyBlockchainInterface())
btc.select_chain_params("bitcoin/regtest")
load_test_config()
def test_net_byte():
load_test_config()
assert struct.unpack(b'B', get_p2pk_vbyte())[0] == 0x6f
assert struct.unpack(b'B', get_p2sh_vbyte())[0] == 196
def setup_env_nodeps(monkeypatch):
monkeypatch.setattr(jmclient.configure,
'get_blockchain_interface_instance',
lambda x: DummyBlockchainInterface())
load_test_config()
def setup_snicker(request):
load_test_config()
def setup_wallet():
load_test_config()
#see note in cryptoengine.py:
cryptoengine.BTC_P2WPKH.VBYTE = 100
jm_single().bc_interface.tick_forward_chain_interval = 2
def test_fast_sync_unavailable(setup_sync):
load_test_config(bs="bitcoin-rpc-no-history")
wallet_service = create_wallet_for_sync([0, 0, 0, 0, 0],
['test_fast_sync_unavailable'])
with pytest.raises(RuntimeError) as e_info:
wallet_service.sync_wallet(fast=True)
def setup_psbt_wallet():
load_test_config()
def setUp(self):
load_test_config()
jm_single().bc_interface.tick_forward_chain_interval = 5
jm_single().bc_interface.simulate_blocks()
def setup_payjoin_server():
load_test_config()
jm_single().bc_interface.tick_forward_chain_interval = 10
jm_single().bc_interface.simulate_blocks()
# handles the custom regtest hrp for bech32
cryptoengine.BTC_P2WPKH.VBYTE = 100
def setUp(self):
load_test_config()
factory = JMClientProtocolFactory(DummyMaker(), proto_type='MAKER')
self.client = factory.buildProtocol(None)
self.tr = proto_helpers.StringTransport()
self.client.makeConnection(self.tr)
def test_absurd_fee(setup_wallets):
jm_single().config.set("POLICY", "absurd_fee_per_kb", "1000")
with pytest.raises(ValueError) as e_info:
estimate_tx_fee(10, 2)
load_test_config()
def setup_full_coinjoin():
load_test_config()
jm_single().bc_interface.tick_forward_chain_interval = 10
jm_single().bc_interface.simulate_blocks()
def setup_wallets():
load_test_config()
jm_single().bc_interface.tick_forward_chain_interval = 1
def setup_keys():
load_test_config()