def verify(self) -> bool:
"""
This method runs several checks to ensure bzr commands can proceed. It is automatically
executed at package initialisation. This includes:
* checks if all expected keys are present in the configuration file
* checks if the `bzr` binary is installed and can be found on the system
Returns:
bool: verification success
"""
logger = KtrLogger(LOG_PREFIX)
success = True
# check if the configuration file is valid
expected_keys = ["branch", "keep", "keep_repo", "orig", "revno"]
for key in expected_keys:
if key not in self.spkg.conf["bzr"]:
logger.err("The [bzr] section in the package's .conf file doesn't set the '" +
key +
"' key.")
success = False
# check if bzr is installed
try:
subprocess.check_output(["which", "bzr"]).decode().rstrip("\n")
except subprocess.CalledProcessError:
logger.log("Install bzr to use the specified source.")
success = False
return success
def get(self) -> bool:
"""
This method attempts to copy the specified source from the location specified in the package
configuration file to the determined destination. If the destination file already exists,
nothing will be done.
Returns:
bool: *True* if source was copied successfully, *False* if not
"""
logger = KtrLogger(LOG_PREFIX)
# check if $KTR_BASE_DIR/sources/$PACKAGE exists and create if not
if not os.access(self.sdir, os.W_OK):
os.makedirs(self.sdir)
# if source seems to already exist, return False
if os.access(self.dest, os.R_OK):
logger.log("Sources already present.", 1)
return False
# copy file from origin to destination
shutil.copy2(self.get_orig(), self.dest)
return True
def verify(self) -> bool:
"""
This method runs several checks to ensure copr uploads can proceed. It is automatically
executed at package initialisation. This includes:
* checks if all expected keys are present in the configuration file
* checks if the `copr-cli` binary is installed and can be found on the system
Returns:
bool: verification success
"""
logger = KtrLogger(LOG_PREFIX)
success = True
# check if the configuration file is valid
expected_keys = ["active", "dists", "keep", "repo", "wait"]
for key in expected_keys:
if key not in self.upkg.conf["copr"]:
logger.err("The [copr] section in the package's .conf file doesn't set the '" +
key +
"' key.")
success = False
# check if copr is installed
try:
subprocess.check_output(["which", "copr-cli"])
except subprocess.CalledProcessError:
logger.log("Install copr-cli to use the specified builder.")
success = False
return success
def ktr_mkdirp(path: str) -> bool:
"""
This function checks for directory existence and the ability to write to it. If the directory
does not exist, it will be created.
Arguments:
str path: path of directory to check and create
Returns:
bool: success (or not)
"""
logger = KtrLogger(LOG_PREFIX)
if os.path.exists(path):
if os.access(path, os.W_OK):
return True
else:
logger.err(path + " can't be written to.")
return False
else:
logger.log(path + " directory doesn't exist and will be created.")
try:
os.makedirs(path)
except OSError:
logger.err(path + " directory could not be created.")
return False
return True
def update(self) -> bool:
"""
This method executes a git repository update as specified in the package configuration file.
If a specific commit has been set in the config file, this method will not attempt to
execute an update.
Returns:
bool: *True* if update available and successful, *False* if not
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
# if specific commit is requested, do not pull updates (obviously)
if self.get_commit() == "HEAD":
return False
# check for connectivity to server
if not is_connected(self.get_orig()):
logger.log("No connection to remote host detected. Cancelling source update.", 2)
return False
# construct git command
cmd = ["git", "pull", "--rebase"]
# add --verbose or --quiet depending on settings
if (ktr.verby == 2) and not ktr.debug:
cmd.append("--quiet")
if (ktr.verby == 0) or ktr.debug:
cmd.append("--verbose")
# check if source directory exists before going there
if not os.access(self.dest, os.W_OK):
logger.err("Sources need to be get before an update can be run.")
return False
# get old commit ID
rev_old = self.commit()
# change to git repository directory
prev_dir = os.getcwd()
os.chdir(self.dest)
# get updates
logger.log_command(cmd, 1)
subprocess.call(cmd)
# go back to previous dir
os.chdir(prev_dir)
# get new commit ID
rev_new = self.commit()
self.date()
# return True if update found, False if not
return rev_new != rev_old
def upload(self) -> bool:
"""
This method executes the upload of the newest SRPM package found in the package directory.
The invocation of `copr-cli` also includes the chroot settings set in the package
configuration file.
Returns:
bool: returns *False* if anything goes wrong, *True* otherwise
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
package_dir = os.path.join(ktr.conf.get_packdir(), self.upkg.get_conf_name())
# get all srpms in the package directory
srpms = glob.glob(os.path.join(package_dir, self.upkg.get_name() + "*.src.rpm"))
if not srpms:
logger.log("No source packages were found. Construct them first.")
return False
# figure out which srpm to build
srpms.sort(reverse=True)
srpm = srpms[0]
# construct copr-cli command
cmd = ["copr-cli", "build", self.get_repo()]
# append chroots (dists)
for dist in self.get_dists():
cmd.append("--chroot")
cmd.append(dist)
# append --nowait if wait=False
if not self.get_wait():
cmd.append("--nowait")
# append package
cmd.append(srpm)
# check for connectivity to server
if not is_connected(self.remote):
logger.log("No connection to remote host detected. Cancelling upload.", 2)
return False
logger.log_command(cmd, 1)
subprocess.call(cmd)
# TODO: error handling
# remove source package if keep=False is specified
if not self.get_keep():
os.remove(srpm)
return True
def verify(self) -> bool:
"""
This method runs several checks to ensure mock builds can proceed. It is automatically
executed at package initialisation. This includes:
* checks if all expected keys are present in the configuration file
* checks if the `mock` binary is installed and can be found on the system
* checks if the current user is allowed to run builds with mock
* checks if the current user is root (building as root is strongly discouraged)
Returns:
bool: verification success
"""
logger = KtrLogger(LOG_PREFIX)
success = True
# check if the configuration file is valid
expected_keys = ["active", "dists", "export", "keep"]
for key in expected_keys:
if key not in self.bpkg.conf["mock"]:
logger.err("The [mock] section in the package's .conf file doesn't set the '" +
key +
"' key.")
success = False
# check if mock is installed
try:
subprocess.check_output(["which", "mock"]).decode().rstrip("\n")
except subprocess.CalledProcessError:
logger.log("Install mock to use the specified builder.")
success = False
# check if the user is in the "mock" group or is root
mock_group = grp.getgrnam("mock")
mock_user = os.getenv("USER")
if mock_user not in mock_group.gr_mem:
logger.err("The current user is not allowed to use mock.")
logger.err("Add yourself to the 'mock' group, log out and back in.")
success = False
if mock_user == "root":
logger.err("Don't attempt to run mock as root.")
success = False
return success
def verify(self) -> bool:
"""
This method runs several checks to ensure srpm builds can proceed. It is automatically
executed at package initialisation. This includes:
* checks if all expected keys are present in the configuration file
* checks if the `mock` binary is installed and can be found on the system
* checks if the current user is allowed to run builds with mock
* checks if the current user is root (building as root is strongly discouraged)
* checks if the .spec file is present at the expected location
Returns:
bool: verification success
"""
logger = KtrLogger(LOG_PREFIX)
success = True
# check if the configuration file is valid
expected_keys = []
for key in expected_keys:
if key not in self.cpkg.conf["srpm"]:
logger.err("The [srpm] section in the package's .conf file doesn't set the '" +
key +
"' key.")
success = False
# check for .spec file presence
if not os.path.exists(self.path):
logger.err("Spec file has not been found at the expected location:")
logger.err(self.path)
success = False
# check if rpmbuild and rpmdev-bumpspec are installed
try:
subprocess.check_output(["which", "rpmbuild"]).decode().rstrip("\n")
except subprocess.CalledProcessError:
logger.log("Install rpm-build to use the srpm constructor.")
success = False
try:
subprocess.check_output(["which", "rpmdev-bumpspec"]).decode().rstrip("\n")
except subprocess.CalledProcessError:
logger.log("Install rpmdevtools to use the srpm constructor.")
success = False
return success
def execute(self) -> bool:
logger = KtrLogger(LOG_PREFIX)
success = self.build()
if not success:
logger.log("Binary package building unsuccessful, aborting action.")
return False
success = self.export()
if not success:
logger.log("Binary package exporting unsuccessful, aborting action.")
return False
return success
def export(self):
"""
This method copies the assembled source packages from `rpmbuild/SRPMS` to the directory for
built packages as specified in the kentauros configuration. If multiple SRPM packages are
found, they all are copied.
"""
logger = KtrLogger(LOG_PREFIX)
srpms = glob.glob(os.path.join(self.srpmdir, "*.src.rpm"))
os.makedirs(self.pdir, exist_ok=True)
for srpm in srpms:
shutil.copy2(srpm, self.pdir)
logger.log("File copied: " + srpm, 0)
def get(self) -> bool:
"""
This method executes the download of the file specified by the URL to the package source
directory.
Returns:
bool: *True* if successful, *False* if not or source already exists
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
# check if $KTR_BASE_DIR/sources/$PACKAGE exists and create if not
if not os.access(self.sdir, os.W_OK):
os.makedirs(self.sdir)
# if source seems to already exist, return False
if os.access(self.dest, os.R_OK):
logger.log("Sources already downloaded.", 1)
return False
# check for connectivity to server
if not is_connected(self.get_orig()):
logger.log("No connection to remote host detected. Cancelling source download.", 2)
return False
# construct wget commands
cmd = ["wget"]
# add --verbose or --quiet depending on settings
if (ktr.verby == 2) and not ktr.debug:
cmd.append("--quiet")
if (ktr.verby == 0) or ktr.debug:
cmd.append("--verbose")
# set origin and destination
cmd.append(self.get_orig())
cmd.append("-O")
cmd.append(self.dest)
# wget source from origin to destination
logger.log_command(cmd, 1)
subprocess.call(cmd)
return True
def verify(self) -> bool:
"""
This method runs several checks to ensure git commands can proceed. It is automatically
executed at package initialisation. This includes:
* checks if all expected keys are present in the configuration file
* checks that the configuration file is consistent (i.e. shallow clone and commit checkout
are not compatible)
* checks if the `git` binary is installed and can be found on the system
Returns:
bool: verification success
"""
logger = KtrLogger(LOG_PREFIX)
success = True
# check if the configuration file is valid
expected_keys = ["branch", "commit", "keep", "keep_repo", "orig", "shallow"]
for key in expected_keys:
if key not in self.spkg.conf["git"]:
logger.err("The [git] section in the package's .conf file doesn't set the '" +
key +
"' key.")
success = False
# shallow clones and checking out a specific commit is not supported
if (self.get_commit() != "HEAD") and self.get_shallow():
logger.err("Shallow clones are not compatible with specifying a specific commit.")
success = False
# check if git is installed
try:
subprocess.check_output(["which", "git"]).decode().rstrip("\n")
except subprocess.CalledProcessError:
logger.log("Install git to use the specified source.")
success = False
return success
def execute(self) -> bool:
"""
This method executes the :py:meth:`Source.prepare()` method to execute source preparation.
This includes downloading or copying to destination, updating if necessary, and exporting to
tarball if necessary.
Returns:
bool: *True* when successful, *False* if sub-action fails
"""
logger = KtrLogger(LOGPREFIX)
source = self.kpkg.get_module("source")
if source is None:
logger.log("This package doesn't define a source module. Aborting.")
return True
success = source.execute()
self.update_status()
if success:
logger.log(self.kpkg.get_conf_name() + ": Success!")
else:
logger.log(self.kpkg.get_conf_name() + ": Not successful.")
return success
def execute(self) -> bool:
"""
This method executes the :py:meth:`Uploader.upload()` method to execute the source upload,
if possible - this only has effect for packages with a valid uploader specified in the
package configuration file.
Returns:
bool: always *True*, future error checking still missing
"""
logger = KtrLogger(LOGPREFIX)
uploader = self.kpkg.get_module("uploader")
if uploader is None:
logger.log("This package doesn't define an uploader module. Aborting.")
return True
success = uploader.execute()
self.update_status()
if success:
logger.log(self.kpkg.get_conf_name() + ": Success!")
else:
logger.log(self.kpkg.get_conf_name() + ": Not successful.")
return success
def execute(self) -> bool:
"""
This method cleans up the sources of to the package specified at initialisation. It executes
the :py:meth:`Source.clean()` method of the :py:class:`Source` instance in the specified
package.
Returns:
bool: always ``True`` at the moment
"""
logger = KtrLogger(LOGPREFIX)
success = True
for module in self.kpkg.get_modules():
cleanup = module.clean()
if not cleanup:
logger.log("Module '" + str(module) + "' did not clean up successfully.")
success = success and cleanup
if success:
logger.log(self.kpkg.get_conf_name() + ": Success!")
else:
logger.log(self.kpkg.get_conf_name() + ": Not successful.")
return success
def init(self):
"""
This method creates a temporary directory (which is then set to `$HOME` in the
:py:meth:`SrpmConstructor.build()` method) and other necessary sub-directories (here:
`SOURCES`, `SRPMS`, `SPECS`).
"""
logger = KtrLogger(LOG_PREFIX)
# make sure to finally call self.clean()!
self.tempdir = tempfile.mkdtemp()
logger.log("Temporary directory " + self.tempdir + " created.", 1)
self.rpmbdir = os.path.join(self.tempdir, "rpmbuild")
self.specdir = os.path.join(self.tempdir, "rpmbuild", "SPECS")
self.srpmdir = os.path.join(self.tempdir, "rpmbuild", "SRPMS")
self.srcsdir = os.path.join(self.tempdir, "rpmbuild", "SOURCES")
# create $TEMPDIR/rpmbuild
if not os.path.exists(self.rpmbdir):
os.mkdir(self.rpmbdir)
logger.log("Temporary rpmbuild directory created: " + self.tempdir, 1)
# create $TEMPDIR/rpmbuild/{SPECS,SRPMS,SOURCES}
for directory in [self.specdir, self.srpmdir, self.srcsdir]:
if not os.path.exists(directory):
os.mkdir(directory)
logger.log("Temporary 'SOURCES', 'SPECS', 'SRPMS' directories created.", 1)
def get_mock_cmd() -> str:
"""
This function tries to determine the correct mock binary path. If something is messing with the
`$PATH` environment variable, it will try to account for that. If mock is not installed (or
cannot be found within `$PATH`, this function will raise an Exception.
Raises:
subprocess.CalledProcessError
Returns:
str: path to the mock binary
"""
logger = KtrLogger(LOG_PREFIX)
mock_cmd = subprocess.check_output(["which", "mock"]).decode().rstrip("\n")
# check if the right binary is used or if something is messing up $PATH
if mock_cmd == "/usr/sbin/mock":
logger.log("Something is messing with your $PATH variable.", 2)
mock_cmd = "/usr/bin/mock"
return mock_cmd
def print_parameters():
"""
This function prints the general execution parameters.
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
print_flush()
logger.log("Debugging: " + str(ktr.debug), 0)
logger.log("Logger Verbosity: " + str(ktr.verby) + "/2", 1)
print_flush()
logger.dbg("Base directory: " + ktr.conf.basedir)
logger.dbg("Package configuration directory: " + ktr.conf.get_confdir())
logger.dbg("Package sources directory: " + ktr.conf.get_datadir())
logger.dbg("Binary package directory: " + ktr.conf.get_expodir())
logger.dbg("Source package directory: " + ktr.conf.get_packdir())
logger.dbg("Package specification directory: " + ktr.conf.get_specdir())
print_flush()
def clean(self) -> bool:
"""
This method cleans up all of a package's sources - excluding other files in the packages's
source directory, which may include patches or other, additional files - they are preserved.
Returns:
bool: *True* if successful
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
if not os.path.exists(self.sdir):
logger.log("Nothing here to be cleaned.", 0)
return True
# try to be careful with "rm -r"
assert os.path.isabs(self.dest)
assert ktr.conf.get_datadir() in self.dest
# remove source destination first
# if destination is a file (tarball):
if os.path.isfile(self.dest):
os.remove(self.dest)
# if destination is a directory (VCS repo):
elif os.path.isdir(self.dest):
shutil.rmtree(self.dest)
# if source directory is empty now (no patches, additional files, etc. left):
# remove whole directory
if not os.listdir(self.sdir):
os.rmdir(self.sdir)
return True
def build(self):
"""
This method starts the mock build (and waits for already running builds with the same
chroot to finish before that).
Returns:
int: return code of the subprocess call
"""
logger = KtrLogger(LOG_PREFIX)
dist_path = os.path.join("/var/lib/mock/", self.dist)
lock_path = os.path.join(dist_path, "buildroot.lock")
# wait 2 minutes for builds occupying the specified build chroot
if os.path.isdir(dist_path):
build_wait = True
while build_wait:
lock_file = open(lock_path, "a+")
try:
fcntl.lockf(lock_file.fileno(), fcntl.LOCK_EX | fcntl.LOCK_NB)
except IOError:
logger.log("The specified build chroot is busy, waiting.", 2)
time.sleep(120)
else:
build_wait = False
finally:
lock_file.close()
cmd = self.get_command()
logger.log_command(cmd)
ret = subprocess.call(cmd)
return ret
def execute(self) -> bool:
logger = KtrLogger(LOGPREFIX)
constructor = self.kpkg.get_module("constructor")
if constructor is None:
logger.log("This package doesn't define a constructor module. Aborting.")
return True
success = constructor.execute()
self.update_status()
if success:
logger.log(self.kpkg.get_conf_name() + ": Success!")
else:
logger.log(self.kpkg.get_conf_name() + ": Not successful.")
return success
def execute(self) -> bool:
"""
This method runs the "chain reaction" corresponding to the package specified at
initialisation, with the configuration from the package configuration file.
Returns:
bool: ``True`` if chain went all the way through, ``False`` if not
"""
ktr = Kentauros()
logger = KtrLogger(LOGPREFIX)
force = ktr.cli.get_force()
success = True
for module in self.kpkg.get_modules():
succeeded = module.execute()
if not succeeded:
logger.err("Execution of module '" + str(module) + "' wasn't successful.")
if force:
logger.log("Execution is forced to continue.")
success = success and succeeded
continue
else:
success = False
break
self.update_status()
if success:
logger.log(self.kpkg.get_conf_name() + ": Success!")
else:
logger.log(self.kpkg.get_conf_name() + ": Not successful.")
return success
def export(self) -> bool:
"""
This method executes the export from the package source repository to a tarball with pretty
file name. It also respects the `git.keep=False` setting in the package configuration file -
the git repository will be deleted from disk after the export if this flag is set.
Returns:
bool: *True* if successful or already done, *False* at failure
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
def remove_not_keep():
"""
This local function removes the git repository and is called after source export, if
not keeping the repository around was specified in the configuration file.
"""
if not self.get_keep():
# try to be careful with "rm -r"
assert os.path.isabs(self.dest)
assert ktr.conf.get_datadir() in self.dest
shutil.rmtree(self.dest)
logger.log("git repository has been deleted after exporting to tarball.", 1)
# construct git command to export HEAD or specified commit
cmd = ["git", "archive", self.get_commit()]
# check if git repo exists
if not os.access(self.dest, os.R_OK):
logger.err("Sources need to be get before they can be exported.")
return False
version = self.formatver()
name_version = self.spkg.get_name() + "-" + version
# add prefix
cmd.append("--prefix=" + name_version + "/")
file_name = os.path.join(self.sdir, name_version + ".tar.gz")
cmd.append("--output")
cmd.append(file_name)
# check if file has already been exported
if os.path.exists(file_name):
logger.log("Tarball has already been exported.", 1)
# remove git repo if keep is False
remove_not_keep()
return True
# remember previous directory
prev_dir = os.getcwd()
# change to git repository directory
os.chdir(self.dest)
# export tar.gz to $KTR_DATA_DIR/$PACKAGE/*.tar.gz
logger.log_command(cmd, 1)
subprocess.call(cmd)
# update saved rev and date
self.commit()
self.date()
# remove git repo if keep is False
remove_not_keep()
os.chdir(prev_dir)
return True
def prepare(self) -> bool:
"""
This method prepares all files necessary for source package assembly.
This includes
- copying every file (not directories) from package source directory to `rpmbuild/SOURCES`,
- removing the latest tarball from the package source directory if it should not be kept,
- copying the package configuration file to `rpmbuild/SOURCES`
- preparing the `package.spec` file in `rpmbuild/SPECS` from the file in the spec directory,
- defining macros for git and bzr version string additions,
- setting `Version:` and `Release:` tags according to configuration,
- appending a changelog entry automatically for every different build,
- copying back the modified spec file to preserve added changelog entries.
Returns:
bool: returns `True` if the preparation was successful.
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
spec = RPMSpec(self.path, self.cpkg.get_module("source"))
if not os.path.exists(self.rpmbdir):
warnings.warn("Make sure to call Constructor.init() before .prepare()!", Warning)
self.init()
# copy sources to rpmbuild/SOURCES
for entry in os.listdir(self.cpkg.get_module("source").sdir):
entry_path = os.path.join(self.cpkg.get_module("source").sdir, entry)
if os.path.isfile(entry_path):
shutil.copy2(entry_path, self.srcsdir)
logger.log("File copied to SOURCES: " + entry_path, 1)
# remove tarballs if they should not be kept
if not self.cpkg.get_module("source").get_keep():
# if source is a tarball (or similar) from the beginning:
if os.path.isfile(self.cpkg.get_module("source").dest):
os.remove(self.cpkg.get_module("source").dest)
# otherwise it is in kentauros' standard .tar.gz format:
else:
tarballs = glob.glob(os.path.join(self.cpkg.get_module("source").sdir,
self.cpkg.get_name()) + "*.tar.gz")
# remove only the newest one to be safe
tarballs.sort(reverse=True)
if os.path.isfile(tarballs[0]):
assert self.cpkg.get_module("source").sdir in tarballs[0]
os.remove(tarballs[0])
logger.log("Tarball removed: " + tarballs[0], 1)
# copy package.conf to rpmbuild/SOURCES
shutil.copy2(self.cpkg.file, self.srcsdir)
logger.log("Package configuration copied to SOURCES: " + self.cpkg.file, 1)
# construct preamble and new version string
old_version = self._get_last_version(spec)
old_release = self._get_last_release(spec)
new_version = self.cpkg.get_version()
# TODO: check if release resetting / incrementing logic works now
spec.set_version()
spec.set_source()
# if old version and new version are different, force release reset to 0
rel_reset = (new_version != old_version)
# start constructing release string from old release string
if rel_reset:
spec.do_release_reset()
# write preamble to new spec file
preamble = spec.build_preamble_string()
# calculate absolute path of new spec file and copy it over
new_spec_path = os.path.join(self.specdir, self.cpkg.get_name() + ".spec")
spec.export_to_file(new_spec_path)
# use "rpmdev-bumpspec" to increment release number and create changelog entries
force = ktr.cli.get_force()
logger.dbg("Old Version: " + old_version)
logger.dbg("New Version: " + new_version)
logger.dbg("Old Release: " + old_release)
# if major version has changed, put it into the changelog
if (old_version != new_version) or (old_release[0] == "0"):
do_release_bump(new_spec_path,
"Update to version " + self.cpkg.get_version() + ".")
new_rpm_spec = RPMSpec(new_spec_path, self.cpkg.get_module("source"))
# else if nothing changed but "force" was set (packaging changes)
# old_version =!= new_version, rel_reset !=!= True
elif force:
message = ktr.cli.get_message()
if message is None:
do_release_bump(new_spec_path, "Update for packaging changes.")
else:
do_release_bump(new_spec_path, message)
new_rpm_spec = RPMSpec(new_spec_path, self.cpkg.get_module("source"))
# else if version has not changed, but snapshot has been updated:
# old_version =!= new_version
elif rel_reset:
new_rpm_spec = RPMSpec(new_spec_path, self.cpkg.get_module("source"))
new_rpm_spec.do_release_reset()
do_release_bump(new_spec_path, "Update to latest snapshot.")
new_rpm_spec = RPMSpec(new_spec_path, self.cpkg.get_module("source"))
else:
logger.err("Something went wrong.")
return False
self.last_release = new_rpm_spec.get_release()
self.last_version = new_rpm_spec.get_version()
# copy new spec file back to ktr/specdir to preserve version tracking,
# release number and changelog consistency (keep old version once as backup)
# BUT: remove preamble again, it would break things otherwise
new_rpm_spec.contents = new_rpm_spec.contents.replace(preamble, "")
shutil.copy2(self.path, self.path + ".old")
new_rpm_spec.export_to_file(self.path)
return True
def build(self) -> bool:
"""
This method constructs the :py:class:`MockBuilder` instances, which contain the commands
for executing the builds, and executes them in turn. It also checks if the executing user is
allowed to execute a mock build by checking if ``$USER`` is "root" or if the user is in the
"mock" group.
If no source packages are found in the specified directory (``PACKDIR``), the build
terminates without executing mock. If SRPM packages are found, only the most recent
(biggest version number, determined just by sorting!) is built, for all specified chroots.
After the last mock invocation, a list of successful and unsuccessful builds is printed.
Returns:
bool: ``True`` if all builds succeeded, ``False`` if not
"""
if not self.get_active():
return True
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
package_dir = os.path.join(ktr.conf.get_packdir(), self.bpkg.get_conf_name())
# get all srpms in the package directory
srpms = glob.glob(os.path.join(package_dir, self.bpkg.get_name() + "*.src.rpm"))
if not srpms:
logger.log("No source packages were found. Construct them first.", 2)
return False
# figure out which srpm to build
srpms.sort(reverse=True)
srpm = srpms[0]
logger.log_list("Specified chroots", self.get_dists())
# generate build queue
build_queue = list()
mock_cmd = get_mock_cmd()
for dist in self.get_dists():
build_queue.append(MockBuild(mock_cmd, srpm, dist))
# run builds in queue
builds_success = list()
builds_failure = list()
for build in build_queue:
ret = build.build()
if ret:
builds_failure.append((build.path, build.dist))
else:
builds_success.append((build.path, build.dist))
# remove source package if keep=False is specified
if not self.get_keep():
os.remove(srpm)
if builds_success:
logger.log_list("Build successes", builds_success)
if builds_failure:
logger.log_list("Build failures", builds_failure)
return not builds_failure
def get(self) -> bool:
"""
This method executes the git repository download to the package source directory. This
respects the branch and commit set in the package configuration file.
Returns:
bool: *True* if successful, *False* if not or source pre-exists
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
# check if $KTR_BASE_DIR/sources/$PACKAGE exists and create if not
if not os.access(self.sdir, os.W_OK):
os.makedirs(self.sdir)
# if source directory seems to already exist, return False
if os.access(self.dest, os.R_OK):
rev = self.commit()
logger.log("Sources already downloaded. Latest commit id:", 2)
logger.log(rev, 2)
return False
# check for connectivity to server
if not is_connected(self.get_orig()):
logger.log("No connection to remote host detected. Cancelling source checkout.", 2)
return False
# construct clone command
cmd_clone = ["git", "clone"]
# add --verbose or --quiet depending on settings
if (ktr.verby == 2) and not ktr.debug:
cmd_clone.append("--quiet")
if (ktr.verby == 0) or ktr.debug:
cmd_clone.append("--verbose")
# set --depth==1 if shallow is specified
if self.get_shallow():
cmd_clone.append("--depth=1")
# set branch if specified
if self.get_branch():
cmd_clone.append("--branch")
cmd_clone.append(self.get_branch())
# set origin and destination
cmd_clone.append(self.get_orig())
cmd_clone.append(self.dest)
# clone git repo from origin to destination
logger.log_command(cmd_clone, 1)
subprocess.call(cmd_clone)
# if commit is specified: checkout commit
if self.get_commit():
# construct checkout command
cmd_checkout = ["git", "checkout", self.get_commit()]
# go to git repo and remember old cwd
prev_dir = os.getcwd()
os.chdir(self.dest)
# checkout commit
logger.log_command(cmd_checkout, 1)
subprocess.call(cmd_checkout)
# go to previous dir
os.chdir(prev_dir)
# get commit ID
rev = self.commit()
self.date()
# check if checkout worked
if self.get_commit() != "HEAD":
if self.get_commit() != rev:
logger.err("Something went wrong, requested commit not checked out.")
return False
# return True if successful
return True
def run():
"""
This function is corresponding to (one of) the "main" function of the `kentauros` package and is
the entry point used by the `ktr.py` script from git and the script installed at installation.
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
print_parameters()
# if no action is specified: exit
if ktr.cli.get_action() is None:
logger.log("No action specified. Exiting.")
logger.log("Use 'ktr --help' for more information.")
print_flush()
return
if not ktr_bootstrap():
raise SystemExit()
packages = list()
# if only specified packages are to be processed: process packages from CLI only
if not ktr.cli.get_packages_all():
packages = ktr.cli.get_packages().copy()
for pkg in packages:
pkg_conf_path = os.path.join(ktr.conf.get_confdir(), pkg + ".conf")
if not os.path.exists(pkg_conf_path):
logger.err("Package configuration for '" + pkg + "' could not be found.")
packages.remove(pkg)
# if all package are to be processed: get package configs present in the package configuration
# directory
else:
pkg_conf_paths = glob.glob(os.path.join(ktr.conf.get_confdir(), "*.conf"))
for pkg_conf_path in pkg_conf_paths:
packages.append(os.path.basename(pkg_conf_path).replace(".conf", ""))
if not packages:
logger.log("No packages have been specified or found. Exiting.")
print_flush()
raise SystemExit()
packages.sort()
# log list of found packages
logger.log_list("Packages", packages)
print_flush()
# generate package objects
for name in packages:
assert isinstance(name, str)
try:
pkg = Package(name)
ktr.add_package(name, pkg)
except PackageError:
logger.log("Package with configuration file '" + name + "' is invalid, skipping.")
continue
actions_success = list()
actions_failure = list()
# run action for every specified package
for name in ktr.get_package_names():
assert isinstance(name, str)
if ktr.state_read(name) is None:
logger.log("Importing new package into the database.")
import_action = ImportAction(name)
import_action.execute()
action_type = ktr.cli.get_action()
action = ACTION_DICT[action_type](name)
success = action.execute()
if success:
actions_success.append(name)
else:
actions_failure.append(name)
print_flush()
if actions_success:
logger.log_list("Successful actions", actions_success)
if actions_failure:
logger.log_list("Failed actions", actions_failure)
print_flush()
raise SystemExit()
def get(self) -> bool:
"""
This method executes the bzr repository download to the package source directory. This
respects the branch and revision set in the package configuration file.
Returns:
bool: `True` if successful, `False` if not or source already exists
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
# check if $KTR_BASE_DIR/sources/$PACKAGE exists and create if not
if not os.access(self.sdir, os.W_OK):
os.makedirs(self.sdir)
# if source directory seems to already exist, return False
if os.access(self.dest, os.R_OK):
rev = self.rev()
logger.log("Sources already downloaded. Latest revision: " + str(rev), 1)
return False
# check for connectivity to server
if not is_connected(self.remote):
logger.log("No connection to remote host detected. Cancelling source checkout.", 2)
return False
# construct bzr command
cmd = ["bzr", "branch"]
# add --verbose or --quiet depending on settings
if (ktr.verby == 2) and not ktr.debug:
cmd.append("--quiet")
if (ktr.verby == 0) or ktr.debug:
cmd.append("--verbose")
# set origin
if not self.get_branch():
cmd.append(self.get_orig())
else:
cmd.append(self.get_orig() + "/" + self.get_branch())
# set revision is specified
if self.get_revno():
cmd.append("--revision")
cmd.append(self.get_revno())
# set destination
cmd.append(self.dest)
# branch bzr repo from origin to destination
logger.log_command(cmd, 1)
subprocess.call(cmd)
# get commit ID
rev = self.rev()
# check if checkout worked
if self.get_revno():
if self.get_revno() != rev:
logger.err("Something went wrong, requested commit not available.")
return False
# return True if successful
return True
def export(self) -> bool:
"""
This method executes the export from the package source repository to a tarball with pretty
file name. It also respects the `bzr.keep=False` setting in the package configuration file -
the bzr repository will be deleted from disk after the export if this flag is set.
Returns:
bool: `True` if successful, `False` if not or already exported
"""
ktr = Kentauros()
logger = KtrLogger(LOG_PREFIX)
def remove_not_keep():
"""
This local function removes the bzr repository and is called after source export, if
not keeping the repository around was specified in the configuration file.
"""
if not self.get_keep_repo():
# try to be careful with "rm -r"
assert os.path.isabs(self.dest)
assert ktr.conf.get_datadir() in self.dest
shutil.rmtree(self.dest)
logger.log("bzr repository deleted after export to tarball", 1)
# construct bzr command
cmd = ["bzr", "export"]
# add --verbose or --quiet depending on settings
if (ktr.verby == 2) and not ktr.debug:
cmd.append("--quiet")
if (ktr.verby == 0) or ktr.debug:
cmd.append("--verbose")
# export HEAD or specified commit
if self.get_revno():
cmd.append("--revision")
cmd.append(self.get_revno())
# check if bzr repo exists
if not os.access(self.dest, os.R_OK):
logger.err("Sources need to be get before they can be exported.")
return False
version = self.formatver()
name_version = self.spkg.get_name() + "-" + version
file_name = os.path.join(self.sdir, name_version + ".tar.gz")
cmd.append(file_name)
# check if file has already been exported
if os.path.exists(file_name):
logger.log("Tarball has already been exported.", 1)
# remove bzr repo if keep is False
remove_not_keep()
return False
# remember previous directory
prev_dir = os.getcwd()
# change to git repository directory
os.chdir(self.dest)
# export tar.gz to $KTR_DATA_DIR/$PACKAGE/*.tar.gz
logger.log_command(cmd, 1)
subprocess.call(cmd)
# update saved rev
self.rev()
# remove bzr repo if keep is False
remove_not_keep()
os.chdir(prev_dir)
return True
