def kepregr(infile, outfile, datacol, kmethod, kneighb, plot, plotlab, clobber,
verbose, logfile, status):
"""
Perform a k-nearest neighbor regression analysis.
"""
## startup parameters
status = 0
labelsize = 24
ticksize = 16
xsize = 16
ysize = 6
lcolor = '#47AE10'
lwidth = 1.0
fcolor = '#9AFF9A'
falpha = 0.3
## log the call
hashline = '----------------------------------------------------------------------------'
kepmsg.log(logfile, hashline, verbose)
call = 'KEPREGR -- '
call += 'infile=' + infile + ' '
call += 'outfile=' + outfile + ' '
call += 'datacol=' + str(datacol) + ' '
call += 'kmethod=' + str(kmethod) + ' '
call += 'kneighb=' + str(kneighb) + ' '
plotit = 'n'
if (plot): plotit = 'y'
call += 'plot=' + plotit + ' '
call += 'plotlab=' + str(plotlab) + ' '
overwrite = 'n'
if (clobber): overwrite = 'y'
call += 'clobber=' + overwrite + ' '
chatter = 'n'
if (verbose): chatter = 'y'
call += 'verbose=' + chatter + ' '
call += 'logfile=' + logfile
kepmsg.log(logfile, call + '\n', verbose)
## start time
kepmsg.clock('KEPREGR started at', logfile, verbose)
## test log file
logfile = kepmsg.test(logfile)
## clobber output file
if clobber: status = kepio.clobber(outfile, logfile, verbose)
if kepio.fileexists(outfile):
message = 'ERROR -- KEPREGR: ' + outfile + ' exists. Use clobber=yes'
status = kepmsg.err(logfile, message, verbose)
## open input file
if status == 0:
instr, status = kepio.openfits(infile, 'readonly', logfile, verbose)
tstart, tstop, bjdref, cadence, status = kepio.timekeys(
instr, infile, logfile, verbose, status)
if cadence == 0.0:
tstart, tstop, ncad, cadence, status = kepio.cadence(
instr, infile, logfile, verbose, status)
if status == 0:
try:
work = instr[0].header['FILEVER']
cadenom = 1.0
except:
cadenom = cadence
## fudge non-compliant FITS keywords with no values
if status == 0:
instr = kepkey.emptykeys(instr, file, logfile, verbose)
## read table structure
if status == 0:
table, status = kepio.readfitstab(infile, instr[1], logfile, verbose)
# read time and flux columns
if status == 0:
barytime, status = kepio.readtimecol(infile, table, logfile, verbose)
if status == 0:
flux, status = kepio.readfitscol(infile, instr[1].data, datacol,
logfile, verbose)
# filter input data table
if status == 0:
try:
nanclean = instr[1].header['NANCLEAN']
except:
naxis2 = 0
for i in range(len(table.field(0))):
if (numpy.isfinite(barytime[i]) and numpy.isfinite(flux[i])
and flux[i] != 0.0):
table[naxis2] = table[i]
naxis2 += 1
instr[1].data = table[:naxis2]
comment = 'NaN cadences removed from data'
status = kepkey.new('NANCLEAN', True, comment, instr[1], outfile,
logfile, verbose)
## read table columns
if status == 0:
try:
intime = instr[1].data.field('barytime')
except:
intime, status = kepio.readfitscol(infile, instr[1].data, 'time',
logfile, verbose)
indata, status = kepio.readfitscol(infile, instr[1].data, datacol,
logfile, verbose)
if status == 0:
intime = intime + bjdref
indata = indata / cadenom
if status == 0:
outdata = knn_predict(intime, indata, kmethod, kneighb)
## comment keyword in output file
if status == 0:
status = kepkey.history(call, instr[0], outfile, logfile, verbose)
## clean up x-axis unit
if status == 0:
intime0 = float(int(tstart / 100) * 100.0)
if intime0 < 2.4e6: intime0 += 2.4e6
ptime = intime - intime0
# print ptime,intime,intime0
xlab = 'BJD $-$ %d' % intime0
## clean up y-axis units
if status == 0:
pout = indata * 1.0
pout2 = outdata * 1.0
nrm = len(str(int(numpy.nanmax(pout)))) - 1
pout = pout / 10**nrm
pout2 = pout2 / 10**nrm
ylab = '10$^%d$ %s' % (nrm, plotlab)
## data limits
xmin = numpy.nanmin(ptime)
xmax = numpy.nanmax(ptime)
ymin = numpy.min(pout)
ymax = numpy.nanmax(pout)
xr = xmax - xmin
yr = ymax - ymin
ptime = insert(ptime, [0], [ptime[0]])
ptime = append(ptime, [ptime[-1]])
pout = insert(pout, [0], [0.0])
pout = append(pout, 0.0)
pout2 = insert(pout2, [0], [0.0])
pout2 = append(pout2, 0.0)
## plot light curve
if status == 0 and plot:
try:
params = {
'backend': 'png',
'axes.linewidth': 2.5,
'axes.labelsize': labelsize,
'axes.font': 'sans-serif',
'axes.fontweight': 'bold',
'text.fontsize': 12,
'legend.fontsize': 12,
'xtick.labelsize': ticksize,
'ytick.labelsize': ticksize
}
rcParams.update(params)
except:
print('ERROR -- KEPREGR: install latex for scientific plotting')
status = 1
if status == 0 and plot:
pylab.figure(1, figsize=[xsize, ysize])
## plot regression data
ax = pylab.axes([0.06, 0.1, 0.93, 0.87])
pylab.gca().xaxis.set_major_formatter(
pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(
pylab.ScalarFormatter(useOffset=False))
# pylab.plot(ptime,pout,color='#ff9900',linestyle='-',linewidth=lwidth)
pylab.scatter(ptime, pout, color='#214CAE', s=5)
fill(ptime, pout, color=fcolor, linewidth=0.0, alpha=falpha)
pylab.plot(ptime[kneighb:-kneighb],
pout2[kneighb:-kneighb],
color=lcolor,
linestyle='-',
linewidth=lwidth * 2.0)
xlabel(xlab, {'color': 'k'})
ylabel(ylab, {'color': 'k'})
xlim(xmin - xr * 0.01, xmax + xr * 0.01)
if ymin >= 0.0:
ylim(ymin - yr * 0.01, ymax + yr * 0.01)
else:
ylim(1.0e-10, ymax + yr * 0.01)
pylab.grid()
pylab.draw()
pylab.savefig(re.sub('\.\S+', '.png', outfile), dpi=100)
## write output file
if status == 0:
for i in range(len(outdata)):
instr[1].data.field(datacol)[i] = outdata[i]
instr.writeto(outfile)
## close input file
if status == 0:
status = kepio.closefits(instr, logfile, verbose)
## end time
if (status == 0):
message = 'KEPREGR completed at'
else:
message = '\nKEPREGR aborted at'
kepmsg.clock(message, logfile, verbose)
def kepdip(infile,outfile,datacol,dmethod,kneighb,hstd,plot,plotlab,
clobber,verbose,logfile,status):
"""
Perform a k-nearest neighbor regression analysis.
"""
## startup parameters
status = 0
labelsize = 24
ticksize = 16
xsize = 16
ysize = 6
lcolor = '#0000ff'
lwidth = 1.0
fcolor = '#9AFF9A'
falpha = 0.3
## log the call
hashline = '----------------------------------------------------------------------------'
kepmsg.log(logfile,hashline,verbose)
call = 'KEPDIP -- '
call += 'infile='+infile+' '
call += 'outfile='+outfile+' '
call += 'datacol='+str(datacol)+' '
call += 'dmethod='+dmethod+' '
call += 'hstd='+str(hstd)+' '
call += 'kneighb='+str(kneighb)+' '
plotit = 'n'
if (plot): plotit = 'y'
call += 'plot='+plotit+ ' '
call += 'plotlab='+str(plotlab)+' '
overwrite = 'n'
if (clobber): overwrite = 'y'
call += 'clobber='+overwrite+ ' '
chatter = 'n'
if (verbose): chatter = 'y'
call += 'verbose='+chatter+' '
call += 'logfile='+logfile
kepmsg.log(logfile,call+'\n',verbose)
## start time
kepmsg.clock('KEPDIP started at',logfile,verbose)
## test log file
logfile = kepmsg.test(logfile)
## clobber output file
if clobber: status = kepio.clobber(outfile,logfile,verbose)
if kepio.fileexists(outfile):
message = 'ERROR -- KEPDIP: ' + outfile + ' exists. Use clobber=yes'
status = kepmsg.err(logfile,message,verbose)
## open input file
if status == 0:
instr, status = kepio.openfits(infile,'readonly',logfile,verbose)
tstart, tstop, bjdref, cadence, status = kepio.timekeys(instr,infile,logfile,verbose,status)
if cadence == 0.0:
tstart, tstop, ncad, cadence, status = kepio.cadence(instr,infile,logfile,verbose,status)
if status == 0:
try:
work = instr[0].header['FILEVER']
cadenom = 1.0
except:
cadenom = cadence
## fudge non-compliant FITS keywords with no values
if status == 0:
instr = kepkey.emptykeys(instr,file,logfile,verbose)
## read table structure
if status == 0:
table, status = kepio.readfitstab(infile,instr[1],logfile,verbose)
# read time and flux columns
if status == 0:
barytime, status = kepio.readtimecol(infile,table,logfile,verbose)
if status == 0:
flux, status = kepio.readfitscol(infile,instr[1].data,datacol,logfile,verbose)
# filter input data table
if status == 0:
try:
nanclean = instr[1].header['NANCLEAN']
except:
naxis2 = 0
for i in range(len(table.field(0))):
if (numpy.isfinite(barytime[i]) and numpy.isfinite(flux[i]) and flux[i] != 0.0):
table[naxis2] = table[i]
naxis2 += 1
instr[1].data = table[:naxis2]
comment = 'NaN cadences removed from data'
status = kepkey.new('NANCLEAN',True,comment,instr[1],outfile,logfile,verbose)
## read table columns
if status == 0:
try:
intime = instr[1].data.field('barytime')
except:
intime, status = kepio.readfitscol(infile,instr[1].data,'time',logfile,verbose)
indata, status = kepio.readfitscol(infile,instr[1].data,datacol,logfile,verbose)
if status == 0:
intime = intime + bjdref
indata = indata / cadenom
## smooth data
if status == 0:
# outdata = knn_predict(intime, indata, kmethod, kneighb)
outdata_t, outdata_l, outdata_fmt = _find_dips(intime, indata, dmethod, kneighb, hstd)
## comment keyword in output file
if status == 0:
status = kepkey.history(call,instr[0],outfile,logfile,verbose)
## clean up x-axis unit
if status == 0:
intime0 = float(int(tstart / 100) * 100.0)
if intime0 < 2.4e6: intime0 += 2.4e6
ptime = intime - intime0
ptime2 = outdata_t - intime0
# print ptime,intime,intime0
xlab = 'BJD $-$ %d' % intime0
## clean up y-axis units
if status == 0:
pout = indata * 1.0
pout2 = outdata_l * 1.0
nrm = len(str(int(numpy.nanmax(pout))))-1
pout = pout / 10**nrm
pout2 = pout2 / 10**nrm
ylab = '10$^%d$ %s' % (nrm, plotlab)
## data limits
xmin = numpy.nanmin(ptime)
xmax = numpy.nanmax(ptime)
ymin = numpy.min(pout)
ymax = numpy.nanmax(pout)
xr = xmax - xmin
yr = ymax - ymin
ptime = insert(ptime,[0],[ptime[0]])
ptime = append(ptime,[ptime[-1]])
pout = insert(pout,[0],[0.0])
pout = append(pout,0.0)
if (len(ptime2) > 0):
ptime2 = insert(ptime2,[0],[ptime2[0]])
ptime2 = append(ptime2,[ptime2[-1]])
pout2 = insert(pout2,[0],[0.0])
pout2 = append(pout2,0.0)
## plot light curve
if status == 0 and plot:
try:
params = {'backend': 'png',
'axes.linewidth': 2.5,
'axes.labelsize': labelsize,
'axes.font': 'sans-serif',
'axes.fontweight' : 'bold',
'text.fontsize': 12,
'legend.fontsize': 12,
'xtick.labelsize': ticksize,
'ytick.labelsize': ticksize}
rcParams.update(params)
except:
print('ERROR -- KEPDIP: install latex for scientific plotting')
status = 1
if status == 0 and plot:
pylab.figure(1,figsize=[xsize,ysize])
## plot regression data
ax = pylab.axes([0.06,0.1,0.93,0.87])
pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
pylab.scatter(ptime, pout, color='#214CAE', s=2)
if (len(ptime2) > 0):
pylab.scatter(ptime2, pout2, color='#47AE10', s=35, marker='o', linewidths=2, alpha=0.4)
xlabel(xlab, {'color' : 'k'})
ylabel(ylab, {'color' : 'k'})
xlim(xmin-xr*0.01,xmax+xr*0.01)
if ymin >= 0.0:
ylim(ymin-yr*0.01,ymax+yr*0.01)
else:
ylim(1.0e-10,ymax+yr*0.01)
pylab.grid()
pylab.draw()
pylab.savefig(re.sub('\.\S+','.png',outfile),dpi=100)
## write output file
if status == 0:
for i in range(len(outdata_fmt)):
instr[1].data.field(datacol)[i] = outdata_fmt[i]
instr.writeto(outfile)
## close input file
if status == 0:
status = kepio.closefits(instr,logfile,verbose)
## end time
if (status == 0):
message = 'KEPDIP completed at'
else:
message = '\nKEPDIP aborted at'
kepmsg.clock(message,logfile,verbose)
def kepsmooth(infile,outfile,datacol,function,fscale,plot,plotlab,
clobber,verbose,logfile,status, cmdLine=False):
## startup parameters
status = 0
labelsize = 24
ticksize = 16
xsize = 18
ysize = 6
lcolor = '#0000ff'
lwidth = 1.0
fcolor = '#ffff00'
falpha = 0.2
## log the call
hashline = '----------------------------------------------------------------------------'
kepmsg.log(logfile,hashline,verbose)
call = 'KEPSMOOTH -- '
call += 'infile='+infile+' '
call += 'outfile='+outfile+' '
call += 'datacol='+str(datacol)+' '
call += 'function='+str(function)+' '
call += 'fscale='+str(fscale)+' '
plotit = 'n'
if (plot): plotit = 'y'
call += 'plot='+plotit+ ' '
call += 'plotlab='+str(plotlab)+' '
overwrite = 'n'
if (clobber): overwrite = 'y'
call += 'clobber='+overwrite+ ' '
chatter = 'n'
if (verbose): chatter = 'y'
call += 'verbose='+chatter+' '
call += 'logfile='+logfile
kepmsg.log(logfile,call+'\n',verbose)
## start time
kepmsg.clock('KEPSMOOTH started at',logfile,verbose)
## test log file
logfile = kepmsg.test(logfile)
## clobber output file
if clobber: status = kepio.clobber(outfile,logfile,verbose)
if kepio.fileexists(outfile):
message = 'ERROR -- KEPSMOOTH: ' + outfile + ' exists. Use clobber=yes'
status = kepmsg.err(logfile,message,verbose)
## open input file
if status == 0:
instr, status = kepio.openfits(infile,'readonly',logfile,verbose)
tstart, tstop, bjdref, cadence, status = kepio.timekeys(instr,infile,logfile,verbose,status)
if cadence == 0.0:
tstart, tstop, ncad, cadence, status = kepio.cadence(instr,infile,logfile,verbose,status)
if status == 0:
try:
work = instr[0].header['FILEVER']
cadenom = 1.0
except:
cadenom = cadence
## fudge non-compliant FITS keywords with no values
if status == 0:
instr = kepkey.emptykeys(instr,file,logfile,verbose)
## read table structure
if status == 0:
table, status = kepio.readfitstab(infile,instr[1],logfile,verbose)
# read time and flux columns
if status == 0:
barytime, status = kepio.readtimecol(infile,table,logfile,verbose)
if status == 0:
flux, status = kepio.readfitscol(infile,instr[1].data,datacol,logfile,verbose)
# filter input data table
if status == 0:
try:
nanclean = instr[1].header['NANCLEAN']
except:
naxis2 = 0
for i in range(len(table.field(0))):
if (numpy.isfinite(barytime[i]) and numpy.isfinite(flux[i]) and flux[i] != 0.0):
table[naxis2] = table[i]
naxis2 += 1
instr[1].data = table[:naxis2]
comment = 'NaN cadences removed from data'
status = kepkey.new('NANCLEAN',True,comment,instr[1],outfile,logfile,verbose)
## read table columns
if status == 0:
try:
intime = instr[1].data.field('barytime')
except:
intime, status = kepio.readfitscol(infile,instr[1].data,'time',logfile,verbose)
indata, status = kepio.readfitscol(infile,instr[1].data,datacol,logfile,verbose)
if status == 0:
intime = intime + bjdref
indata = indata / cadenom
## smooth data
if status == 0:
outdata = kepfunc.smooth(indata,fscale/(cadence/86400),function)
## comment keyword in output file
if status == 0:
status = kepkey.history(call,instr[0],outfile,logfile,verbose)
## clean up x-axis unit
if status == 0:
intime0 = float(int(tstart / 100) * 100.0)
if intime0 < 2.4e6: intime0 += 2.4e6
ptime = intime - intime0
xlab = 'BJD $-$ %d' % intime0
## clean up y-axis units
if status == 0:
pout = indata * 1.0
pout2 = outdata * 1.0
nrm = len(str(int(numpy.nanmax(pout))))-1
pout = pout / 10**nrm
pout2 = pout2 / 10**nrm
ylab = '10$^%d$ %s' % (nrm, re.sub('_','-',plotlab))
## data limits
xmin = numpy.nanmin(ptime)
xmax = numpy.nanmax(ptime)
ymin = numpy.min(pout)
ymax = numpy.nanmax(pout)
xr = xmax - xmin
yr = ymax - ymin
ptime = insert(ptime,[0],[ptime[0]])
ptime = append(ptime,[ptime[-1]])
pout = insert(pout,[0],[0.0])
pout = append(pout,0.0)
pout2 = insert(pout2,[0],[0.0])
pout2 = append(pout2,0.0)
## plot light curve
if status == 0 and plot:
try:
params = {'backend': 'png',
'axes.linewidth': 2.5,
'axes.labelsize': labelsize,
'axes.font': 'sans-serif',
'axes.fontweight' : 'bold',
'text.fontsize': 12,
'legend.fontsize': 12,
'xtick.labelsize': ticksize,
'ytick.labelsize': ticksize}
rcParams.update(params)
except:
print 'ERROR -- KEPSMOOTH: install latex for scientific plotting'
status = 1
if status == 0 and plot:
pylab.figure(1,figsize=[xsize,ysize])
# delete any fossil plots in the matplotlib window
pylab.clf()
# position axes inside the plotting window
ax = pylab.subplot(111)
pylab.subplots_adjust(0.06,0.1,0.93,0.88)
# force tick labels to be absolute rather than relative
pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
# rotate y labels by 90 deg
labels = ax.get_yticklabels()
setp(labels, 'rotation', 90)
pylab.plot(ptime[1:-1],pout[1:-1],color='#ff9900',linestyle='-',linewidth=lwidth)
fill(ptime,pout,color=fcolor,linewidth=0.0,alpha=falpha)
pylab.plot(ptime,pout2,color=lcolor,linestyle='-',linewidth=lwidth*4.0)
pylab.xlabel(xlab, {'color' : 'k'})
pylab.ylabel(ylab, {'color' : 'k'})
xlim(xmin-xr*0.01,xmax+xr*0.01)
if ymin >= 0.0:
ylim(ymin-yr*0.01,ymax+yr*0.01)
else:
ylim(1.0e-10,ymax+yr*0.01)
pylab.grid()
# render plot
if cmdLine:
pylab.show()
else:
pylab.ion()
pylab.plot([])
pylab.ioff()
## write output file
if status == 0:
for i in range(len(outdata)):
instr[1].data.field(datacol)[i] = outdata[i]
instr.writeto(outfile)
## close input file
if status == 0:
status = kepio.closefits(instr,logfile,verbose)
## end time
if (status == 0):
message = 'KEPSMOOTH completed at'
else:
message = '\nKEPSMOOTH aborted at'
kepmsg.clock(message,logfile,verbose)
def kepsmooth(infile,outfile,datacol,function,fscale,plot,plotlab,
clobber,verbose,logfile,status, cmdLine=False):
## startup parameters
status = 0
labelsize = 24
ticksize = 16
xsize = 18
ysize = 6
lcolor = '#0000ff'
lwidth = 1.0
fcolor = '#ffff00'
falpha = 0.2
## log the call
hashline = '----------------------------------------------------------------------------'
kepmsg.log(logfile,hashline,verbose)
call = 'KEPSMOOTH -- '
call += 'infile='+infile+' '
call += 'outfile='+outfile+' '
call += 'datacol='+str(datacol)+' '
call += 'function='+str(function)+' '
call += 'fscale='+str(fscale)+' '
plotit = 'n'
if (plot): plotit = 'y'
call += 'plot='+plotit+ ' '
call += 'plotlab='+str(plotlab)+' '
overwrite = 'n'
if (clobber): overwrite = 'y'
call += 'clobber='+overwrite+ ' '
chatter = 'n'
if (verbose): chatter = 'y'
call += 'verbose='+chatter+' '
call += 'logfile='+logfile
kepmsg.log(logfile,call+'\n',verbose)
## start time
kepmsg.clock('KEPSMOOTH started at',logfile,verbose)
## test log file
logfile = kepmsg.test(logfile)
## clobber output file
if clobber: status = kepio.clobber(outfile,logfile,verbose)
if kepio.fileexists(outfile):
message = 'ERROR -- KEPSMOOTH: ' + outfile + ' exists. Use clobber=yes'
status = kepmsg.err(logfile,message,verbose)
## open input file
if status == 0:
instr, status = kepio.openfits(infile,'readonly',logfile,verbose)
tstart, tstop, bjdref, cadence, status = kepio.timekeys(instr,infile,logfile,verbose,status)
if cadence == 0.0:
tstart, tstop, ncad, cadence, status = kepio.cadence(instr,infile,logfile,verbose,status)
if status == 0:
try:
work = instr[0].header['FILEVER']
cadenom = 1.0
except:
cadenom = cadence
## fudge non-compliant FITS keywords with no values
if status == 0:
instr = kepkey.emptykeys(instr,file,logfile,verbose)
## read table structure
if status == 0:
table, status = kepio.readfitstab(infile,instr[1],logfile,verbose)
# read time and flux columns
if status == 0:
barytime, status = kepio.readtimecol(infile,table,logfile,verbose)
if status == 0:
flux, status = kepio.readfitscol(infile,instr[1].data,datacol,logfile,verbose)
# filter input data table
if status == 0:
try:
nanclean = instr[1].header['NANCLEAN']
except:
naxis2 = 0
for i in range(len(table.field(0))):
if (numpy.isfinite(barytime[i]) and numpy.isfinite(flux[i]) and flux[i] != 0.0):
table[naxis2] = table[i]
naxis2 += 1
instr[1].data = table[:naxis2]
comment = 'NaN cadences removed from data'
status = kepkey.new('NANCLEAN',True,comment,instr[1],outfile,logfile,verbose)
## read table columns
if status == 0:
try:
intime = instr[1].data.field('barytime')
except:
intime, status = kepio.readfitscol(infile,instr[1].data,'time',logfile,verbose)
indata, status = kepio.readfitscol(infile,instr[1].data,datacol,logfile,verbose)
if status == 0:
intime = intime + bjdref
indata = indata / cadenom
## smooth data
if status == 0:
outdata = kepfunc.smooth(indata,fscale/(cadence/86400),function)
## comment keyword in output file
if status == 0:
status = kepkey.history(call,instr[0],outfile,logfile,verbose)
## clean up x-axis unit
if status == 0:
intime0 = float(int(tstart / 100) * 100.0)
if intime0 < 2.4e6: intime0 += 2.4e6
ptime = intime - intime0
xlab = 'BJD $-$ %d' % intime0
## clean up y-axis units
if status == 0:
pout = indata * 1.0
pout2 = outdata * 1.0
nrm = len(str(int(numpy.nanmax(pout))))-1
pout = pout / 10**nrm
pout2 = pout2 / 10**nrm
ylab = '10$^%d$ %s' % (nrm, re.sub('_','-',plotlab))
## data limits
xmin = numpy.nanmin(ptime)
xmax = numpy.nanmax(ptime)
ymin = numpy.min(pout)
ymax = numpy.nanmax(pout)
xr = xmax - xmin
yr = ymax - ymin
ptime = insert(ptime,[0],[ptime[0]])
ptime = append(ptime,[ptime[-1]])
pout = insert(pout,[0],[0.0])
pout = append(pout,0.0)
pout2 = insert(pout2,[0],[0.0])
pout2 = append(pout2,0.0)
## plot light curve
if status == 0 and plot:
try:
params = {'backend': 'png',
'axes.linewidth': 2.5,
'axes.labelsize': labelsize,
'axes.font': 'sans-serif',
'axes.fontweight' : 'bold',
'text.fontsize': 12,
'legend.fontsize': 12,
'xtick.labelsize': ticksize,
'ytick.labelsize': ticksize}
rcParams.update(params)
except:
print('ERROR -- KEPSMOOTH: install latex for scientific plotting')
status = 1
if status == 0 and plot:
pylab.figure(1,figsize=[xsize,ysize])
# delete any fossil plots in the matplotlib window
pylab.clf()
# position axes inside the plotting window
ax = pylab.subplot(111)
pylab.subplots_adjust(0.06,0.1,0.93,0.88)
# force tick labels to be absolute rather than relative
pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
# rotate y labels by 90 deg
labels = ax.get_yticklabels()
setp(labels, 'rotation', 90)
pylab.plot(ptime[1:-1],pout[1:-1],color='#ff9900',linestyle='-',linewidth=lwidth)
fill(ptime,pout,color=fcolor,linewidth=0.0,alpha=falpha)
pylab.plot(ptime,pout2,color=lcolor,linestyle='-',linewidth=lwidth*4.0)
pylab.xlabel(xlab, {'color' : 'k'})
pylab.ylabel(ylab, {'color' : 'k'})
xlim(xmin-xr*0.01,xmax+xr*0.01)
if ymin >= 0.0:
ylim(ymin-yr*0.01,ymax+yr*0.01)
else:
ylim(1.0e-10,ymax+yr*0.01)
pylab.grid()
# render plot
if cmdLine:
pylab.show()
else:
pylab.ion()
pylab.plot([])
pylab.ioff()
## write output file
if status == 0:
for i in range(len(outdata)):
instr[1].data.field(datacol)[i] = outdata[i]
instr.writeto(outfile)
## close input file
if status == 0:
status = kepio.closefits(instr,logfile,verbose)
## end time
if (status == 0):
message = 'KEPSMOOTH completed at'
else:
message = '\nKEPSMOOTH aborted at'
kepmsg.clock(message,logfile,verbose)
def kepsmooth(
infile, outfile, datacol, function, fscale, plot, plotlab, clobber, verbose, logfile, status, cmdLine=False
):
## startup parameters
status = 0
labelsize = 24
ticksize = 16
xsize = 18
ysize = 6
lcolor = "#0000ff"
lwidth = 1.0
fcolor = "#ffff00"
falpha = 0.2
## log the call
hashline = "----------------------------------------------------------------------------"
kepmsg.log(logfile, hashline, verbose)
call = "KEPSMOOTH -- "
call += "infile=" + infile + " "
call += "outfile=" + outfile + " "
call += "datacol=" + str(datacol) + " "
call += "function=" + str(function) + " "
call += "fscale=" + str(fscale) + " "
plotit = "n"
if plot:
plotit = "y"
call += "plot=" + plotit + " "
call += "plotlab=" + str(plotlab) + " "
overwrite = "n"
if clobber:
overwrite = "y"
call += "clobber=" + overwrite + " "
chatter = "n"
if verbose:
chatter = "y"
call += "verbose=" + chatter + " "
call += "logfile=" + logfile
kepmsg.log(logfile, call + "\n", verbose)
## start time
kepmsg.clock("KEPSMOOTH started at", logfile, verbose)
## test log file
logfile = kepmsg.test(logfile)
## clobber output file
if clobber:
status = kepio.clobber(outfile, logfile, verbose)
if kepio.fileexists(outfile):
message = "ERROR -- KEPSMOOTH: " + outfile + " exists. Use clobber=yes"
status = kepmsg.err(logfile, message, verbose)
## open input file
if status == 0:
instr, status = kepio.openfits(infile, "readonly", logfile, verbose)
tstart, tstop, bjdref, cadence, status = kepio.timekeys(instr, infile, logfile, verbose, status)
if cadence == 0.0:
tstart, tstop, ncad, cadence, status = kepio.cadence(instr, infile, logfile, verbose, status)
if status == 0:
try:
work = instr[0].header["FILEVER"]
cadenom = 1.0
except:
cadenom = cadence
## fudge non-compliant FITS keywords with no values
if status == 0:
instr = kepkey.emptykeys(instr, file, logfile, verbose)
## read table structure
if status == 0:
table, status = kepio.readfitstab(infile, instr[1], logfile, verbose)
# read time and flux columns
if status == 0:
barytime, status = kepio.readtimecol(infile, table, logfile, verbose)
if status == 0:
flux, status = kepio.readfitscol(infile, instr[1].data, datacol, logfile, verbose)
# filter input data table
if status == 0:
try:
nanclean = instr[1].header["NANCLEAN"]
except:
naxis2 = 0
for i in range(len(table.field(0))):
if numpy.isfinite(barytime[i]) and numpy.isfinite(flux[i]) and flux[i] != 0.0:
table[naxis2] = table[i]
naxis2 += 1
instr[1].data = table[:naxis2]
comment = "NaN cadences removed from data"
status = kepkey.new("NANCLEAN", True, comment, instr[1], outfile, logfile, verbose)
## read table columns
if status == 0:
try:
intime = instr[1].data.field("barytime")
except:
intime, status = kepio.readfitscol(infile, instr[1].data, "time", logfile, verbose)
indata, status = kepio.readfitscol(infile, instr[1].data, datacol, logfile, verbose)
if status == 0:
intime = intime + bjdref
indata = indata / cadenom
## smooth data
if status == 0:
outdata = kepfunc.smooth(indata, fscale / (cadence / 86400), function)
## comment keyword in output file
if status == 0:
status = kepkey.history(call, instr[0], outfile, logfile, verbose)
## clean up x-axis unit
if status == 0:
intime0 = float(int(tstart / 100) * 100.0)
if intime0 < 2.4e6:
intime0 += 2.4e6
ptime = intime - intime0
xlab = "BJD $-$ %d" % intime0
## clean up y-axis units
if status == 0:
pout = indata * 1.0
pout2 = outdata * 1.0
nrm = len(str(int(numpy.nanmax(pout)))) - 1
pout = pout / 10 ** nrm
pout2 = pout2 / 10 ** nrm
ylab = "10$^%d$ %s" % (nrm, re.sub("_", "-", plotlab))
## data limits
xmin = numpy.nanmin(ptime)
xmax = numpy.nanmax(ptime)
ymin = numpy.min(pout)
ymax = numpy.nanmax(pout)
xr = xmax - xmin
yr = ymax - ymin
ptime = insert(ptime, [0], [ptime[0]])
ptime = append(ptime, [ptime[-1]])
pout = insert(pout, [0], [0.0])
pout = append(pout, 0.0)
pout2 = insert(pout2, [0], [0.0])
pout2 = append(pout2, 0.0)
## plot light curve
if status == 0 and plot:
try:
params = {
"backend": "png",
"axes.linewidth": 2.5,
"axes.labelsize": labelsize,
"axes.font": "sans-serif",
"axes.fontweight": "bold",
"text.fontsize": 12,
"legend.fontsize": 12,
"xtick.labelsize": ticksize,
"ytick.labelsize": ticksize,
}
rcParams.update(params)
except:
print "ERROR -- KEPSMOOTH: install latex for scientific plotting"
status = 1
if status == 0 and plot:
pylab.figure(1, figsize=[xsize, ysize])
# delete any fossil plots in the matplotlib window
pylab.clf()
# position axes inside the plotting window
ax = pylab.subplot(111)
pylab.subplots_adjust(0.06, 0.1, 0.93, 0.88)
# force tick labels to be absolute rather than relative
pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
# rotate y labels by 90 deg
labels = ax.get_yticklabels()
setp(labels, "rotation", 90)
pylab.plot(ptime[1:-1], pout[1:-1], color="#ff9900", linestyle="-", linewidth=lwidth)
fill(ptime, pout, color=fcolor, linewidth=0.0, alpha=falpha)
pylab.plot(ptime, pout2, color=lcolor, linestyle="-", linewidth=lwidth * 4.0)
pylab.xlabel(xlab, {"color": "k"})
pylab.ylabel(ylab, {"color": "k"})
xlim(xmin - xr * 0.01, xmax + xr * 0.01)
if ymin >= 0.0:
ylim(ymin - yr * 0.01, ymax + yr * 0.01)
else:
ylim(1.0e-10, ymax + yr * 0.01)
pylab.grid()
# render plot
if cmdLine:
pylab.show()
else:
pylab.ion()
pylab.plot([])
pylab.ioff()
## write output file
if status == 0:
for i in range(len(outdata)):
instr[1].data.field(datacol)[i] = outdata[i]
instr.writeto(outfile)
## close input file
if status == 0:
status = kepio.closefits(instr, logfile, verbose)
## end time
if status == 0:
message = "KEPSMOOTH completed at"
else:
message = "\nKEPSMOOTH aborted at"
kepmsg.clock(message, logfile, verbose)