def test_host_disk_wipe_rootfs():
"""
This test attempts to run system host-disk-wipe on a node using the rootfs
disk. Command format is:
system host-disk-wipe [--confirm] <hostname or id> <disk uuid>
Note, host-disk-wipe is only applicable to controller and compute nodes. It
cannot be used on the rootfs disk. It cannot be used for a disk that is
used by a PV or has partitions used by a PV.
Arguments:
- None
Test Steps:
1. Determine which is the rootfs disk
2. Attempt to wipe the disk
3. Expect it to fail for every node
Assumptions:
- None
"""
computes = system_helper.get_hosts(personality="compute")
storage = system_helper.get_hosts(personality="storage")
hosts = system_helper.get_controllers() + computes + storage
LOG.tc_step("Gather rootfs disks")
rootfs = storage_helper.get_hosts_rootfs(hosts)
for host in rootfs:
uuid = rootfs[host]
LOG.tc_step("Attempting to wipe {} from {}".format(uuid[0], host))
cmd = 'host-disk-wipe --confirm {} {}'.format(host, uuid[0])
rc, out = cli.system(cmd, fail_ok=True)
assert rc != 0, "Expected wipe disk to fail but instead succeeded"
def _test_GET_ihosts_host_id_uppercaseUUID(sysinv_rest):
"""
Test GET of <resource> with valid authentication and upper
case UUID values.
RFC 4122 covers the need for uppercase UUID values
Args:
n/a
Prerequisites: system is running
Test Setups:
n/a
Test Steps:
- Using requests GET <resource> with proper authentication
- Determine if expected status_code of 200 is received
Test Teardown:
n/a
"""
path = "/ihosts/{}/addresses"
r = sysinv_rest
LOG.info("This test case will FAIL until CGTS-8265 is resolved")
LOG.info(system_helper.get_hosts())
for host in system_helper.get_hosts():
uuid = system_helper.get_host_values(host, 'uuid')[0]
message = "Using requests GET {} with proper authentication"
LOG.tc_step(message.format(path))
status_code, text = r.get(resource=path.format(uuid.upper()),
auth=True)
message = "Retrieved: status_code: {} message: {}"
LOG.info(message.format(status_code, text))
LOG.tc_step("Determine if expected code of 200 is received")
message = "Expected code of 200 - received {} and message {}"
assert status_code == 200, message.format(status_code, text)
def test_dc_dead_office_recovery_central(
reserve_unreserve_all_hosts_module_central):
"""
Test dead office recovery main cloud
Args:
Setups:
- Reserve all nodes for central cloud in vlm
Test Steps:
- Launch various types of VMs in primary clouds.
- Power off all nodes in vlm using multi-processing to simulate a power outage
- Power on all nodes
- Wait for nodes to become online/available
- Check all the subclouds are syncs as start of the test.
- check all the VMs are up in subclouds which are launched.
"""
LOG.tc_step("Boot 5 vms with various boot_source, disks, etc")
vms = vm_helper.boot_vms_various_types()
central_auth = Tenant.get('admin_platform', dc_region='SystemController')
hosts = system_helper.get_hosts(auth_info=central_auth)
managed_subclouds = dc_helper.get_subclouds(mgmt='managed', avail='online')
hosts_to_check = system_helper.get_hosts(
availability=['available', 'online'], auth_info=central_auth)
LOG.info("Online or Available hosts before power-off: {}".format(
hosts_to_check))
LOG.tc_step(
"Powering off hosts in multi-processes to simulate power outage: {}".
format(hosts))
try:
vlm_helper.power_off_hosts_simultaneously(hosts,
region='central_region')
except:
raise
finally:
LOG.tc_step("Wait for 60 seconds and power on hosts: {}".format(hosts))
time.sleep(60)
LOG.info("Hosts to check after power-on: {}".format(hosts_to_check))
vlm_helper.power_on_hosts(hosts,
reserve=False,
reconnect_timeout=HostTimeout.REBOOT +
HostTimeout.REBOOT,
hosts_to_check=hosts_to_check,
region='central_region')
LOG.tc_step("Check subclouds managed")
current_managed_subclouds = dc_helper.get_subclouds(mgmt='managed',
avail='online')
assert managed_subclouds == current_managed_subclouds, 'current managed subclouds are diffrent from \
origin {} current {}'.format(
current_managed_subclouds, managed_subclouds)
LOG.tc_step("Check vms are recovered after dead office recovery")
vm_helper.wait_for_vms_values(vms, fail_ok=False, timeout=600)
LOG.tc_step("Check vms are reachable after central clouds DOR test")
for vm in vms:
vm_helper.wait_for_vm_pingable_from_natbox(
vm_id=vm, timeout=VMTimeout.DHCP_RETRY)
def test_host_disk_wipe_unassigned_disk():
"""
This test attempts to run system host-disk-wipe on a node using any
unassigned disk.
Command format is:
system host-disk-wipe [--confirm] <hostname or id> <disk uuid>
Note, host-disk-wipe is only applicable to controller and compute nodes. It
cannot be used on the rootfs disk. It cannot be used for a disk that is
used by a PV or has partitions used by a PV.
Arguments:
- None
Test Steps:
1. Determine which disks are unassigned by comparing size_gib to
available_gib in system host-disk-list
2. Attempt to wipe the disk
3. Expect it to pass
Assumptions:
- None
"""
computes = system_helper.get_hosts(personality="compute",
availability="available")
controllers = system_helper.get_hosts(personality="controller",
availability="available")
hosts = controllers + computes
found_disk = False
for host in hosts:
LOG.info("Query disks on host {}".format(host))
disks = storage_helper.get_host_disks(host)
for disk_uuid in disks:
cmd = "host-disk-show {} {}".format(host, disk_uuid)
rc, out = cli.system(cmd)
size_gib = table_parser.get_value_two_col_table(
table_parser.table(out), "size_gib")
available_gib = table_parser.get_value_two_col_table(
table_parser.table(out), "available_gib")
if int(float(size_gib)) == int(float(available_gib)):
found_disk = True
LOG.tc_step("Attempting to wipe disk {} from host {}".format(
disk_uuid, host))
cmd = 'host-disk-wipe --confirm {} {}'.format(host, disk_uuid)
rc, out = cli.system(cmd, fail_ok=True)
assert rc == 0, "Expected wipe disk to pass but instead failed"
break
if not found_disk:
skip("No unassigned disks to run test")
def test_dead_office_recovery(reserve_unreserve_all_hosts_module):
"""
Test dead office recovery with vms
Args:
reserve_unreserve_all_hosts_module: test fixture to reserve unreserve all vlm nodes for lab under test
Setups:
- Reserve all nodes in vlm
Test Steps:
- Boot 5 vms with various boot_source, disks, etc and ensure they can be reached from NatBox
- Power off all nodes in vlm using multi-processing to simulate a power outage
- Power on all nodes
- Wait for nodes to become online/available
- Check vms are recovered after hosts come back up and vms can be reached from NatBox
"""
LOG.tc_step("Boot 5 vms with various boot_source, disks, etc")
vms = vm_helper.boot_vms_various_types()
hosts = system_helper.get_hosts()
hosts_to_check = system_helper.get_hosts(availability=['available', 'online'])
LOG.info("Online or Available hosts before power-off: {}".format(hosts_to_check))
LOG.tc_step("Powering off hosts in multi-processes to simulate power outage: {}".format(hosts))
region = None
if ProjVar.get_var('IS_DC'):
region = ProjVar.get_var('PRIMARY_SUBCLOUD')
try:
vlm_helper.power_off_hosts_simultaneously(hosts, region=region)
except:
raise
finally:
LOG.tc_step("Wait for 60 seconds and power on hosts: {}".format(hosts))
time.sleep(60)
LOG.info("Hosts to check after power-on: {}".format(hosts_to_check))
vlm_helper.power_on_hosts(hosts, reserve=False, reconnect_timeout=HostTimeout.REBOOT+HostTimeout.REBOOT,
hosts_to_check=hosts_to_check, region=region)
LOG.tc_step("Check vms are recovered after dead office recovery")
vm_helper.wait_for_vms_values(vms, fail_ok=False, timeout=600)
for vm in vms:
vm_helper.wait_for_vm_pingable_from_natbox(vm_id=vm, timeout=VMTimeout.DHCP_RETRY)
computes = host_helper.get_hypervisors()
if len(computes) >= 4:
system_helper.wait_for_alarm(alarm_id=EventLogID.MULTI_NODE_RECOVERY, timeout=120)
system_helper.wait_for_alarm_gone(alarm_id=EventLogID.MULTI_NODE_RECOVERY, check_interval=60, timeout=1200)
def test_force_reboot_host(host_type):
"""
Verify lock unlock host
Test Steps:
- Select a host per given type. If type is controller, select standby
controller.
- Lock selected host and ensure it is successfully locked
- Unlock selected host and ensure it is successfully unlocked
"""
LOG.tc_step("Select a {} node from system if any".format(host_type))
hosts = system_helper.get_hosts(availability=(HostAvailState.AVAILABLE,
HostAvailState.DEGRADED),
personality=host_type)
if not hosts:
skip("No available or degraded {} host found on system".format(
host_type))
host = hosts[0]
LOG.tc_step("Force reboot {} host: {}".format(host_type, host))
HostsToRecover.add(host)
host_helper.reboot_hosts(hostnames=host)
host_helper.wait_for_hosts_ready(host)
def test_reboot_hosts(hostnames):
LOG.tc_step("Processing hostnames provided...")
system_hosts = system_helper.get_hosts()
is_str = False
if isinstance(hostnames, str):
is_str = True
hostnames = [hostnames]
tmp_hosts = hostnames
for host in tmp_hosts:
if host == 'active_controller':
hostnames.remove(host)
host = system_helper.get_active_controller_name()
hostnames.append(host)
elif host == 'standby_controller':
hostnames.remove(host)
host = system_helper.get_standby_controller_name()
hostnames.append(host)
if host not in system_hosts:
skip("Host(s) not found in system. Host(s) requested: {}."
"Hosts in system: {}".format(hostnames, system_hosts))
if is_str:
hostnames = hostnames[0]
LOG.tc_step("Rebooting following host(s): {}".format(hostnames))
results = host_helper.reboot_hosts(hostnames)
LOG.tc_step("Results: {}".format(results))
assert results[0] == 0
def test_GET_idisks(sysinv_rest):
"""
Test GET of <resource> with valid authentication.
Args:
n/a
Prerequisites: system is running
Test Setups:
n/a
Test Steps:
- Using requests GET <resource> with proper authentication
- Determine if expected status_code of 200 is received
Test Teardown:
n/a
"""
r = sysinv_rest
path = "/idisks/{}"
hostnames = system_helper.get_hosts()
for host in hostnames:
disk_uuids = storage_helper.get_host_disks(host)
for disk_uuid in disk_uuids:
res = path.format(disk_uuid)
message = "Using requests GET {} with proper authentication"
LOG.tc_step(message.format(res))
status_code, text = r.get(resource=res, auth=True)
message = "Retrieved: status_code: {} message: {}"
LOG.debug(message.format(status_code, text))
if status_code == 404:
pytest.skip("Unsupported resource in this configuration.")
else:
message = "Determine if expected code of 200 is received"
LOG.tc_step(message)
message = "Expected code of 200 - received {} and message {}"
assert status_code == 200, message.format(status_code, text)
def test_assign_rootfs_disk_to_pv():
"""
This test attempts to create a PV with type Disk on the rootfs. This is
expected to fail.
Assumptions:
* None
Test Steps:
* Determine which disk is the rootfs
* Attempt to create a PV on that disk using a PV type of Disk.
Teardown:
* None
"""
computes = system_helper.get_hosts(personality="compute")
hosts = system_helper.get_controllers() + computes
rootfs = storage_helper.get_hosts_rootfs(hosts)
for host in rootfs:
uuid = rootfs[host]
# cmd = "host-pv-add -t disk {} cgts-vg {}".format(host, uuid[0])
cmd = "host-pv-add {} cgts-vg {}".format(host, uuid[0])
rc, out = cli.system(cmd, fail_ok=True)
assert rc != 0, "Expected PV creation to fail but instead succeeded"
def locate_usb(host_type="controller", min_size=13):
"""
Try to locate a USB device on a host of the type specified.
Arguments:
- host_type (string) - e.g. controller, compute, storage
- min_size (int) - minimum size of USB required (GiB)
Returns:
- hostname, e.g. controller-0
- usb_device, e.g. /dev/sdb
"""
LOG.tc_step("Check all hosts of type {} for USB devices".format(host_type))
hosts = system_helper.get_hosts(personality=host_type)
for host in hosts:
with host_helper.ssh_to_host(host) as host_ssh:
cmd = "ls --color=none -ltrd /dev/disk/by-id/usb*"
rc, out = host_ssh.exec_cmd(cmd)
if rc == 0:
usb_device = "/dev/" + (out.splitlines()[0])[-3:]
LOG.info("Found USB device {} on host {}".format(usb_device, host))
cmd = "blockdev --getsize64 {}".format(usb_device)
usb_bytes = host_ssh.exec_sudo_cmd(cmd)[1]
gib = int(usb_bytes) / (1024 * 1024 * 1024)
if gib > min_size:
LOG.info("Size of USB device is sufficient for test")
return host, usb_device
else:
skip("Size of USB device is insufficient for test")
return (None, None)
def test_create_zero_sized_host_partition():
"""
This test attempts to create a partition of size zero once on each host.
This should be rejected.
Test steps:
* Create partition of size zero
* Ensure the provisioning is rejected
Teardown:
* None
"""
computes = system_helper.get_hosts(personality="compute")
hosts = system_helper.get_controllers() + computes
for host in hosts:
disks = storage_helper.get_host_disks(host)
for uuid in disks:
LOG.tc_step(
"Attempt to create zero sized partition on uuid {} on host {}".
format(uuid, host))
rc, out = storage_helper.create_host_partition(host,
uuid,
"0",
fail_ok=True)
assert rc != 0, "Partition creation was expected to fail but instead succeeded"
# Let's do this for one disk only on each host
break
def _test_modify_non_existing_cpu_negative(lock_):
"""
TC1940 cpu data can't be modified for a non existing cpu
Test Steps:
- Choose a host to lock and find how many phys cores it has
- Attempt to change the cpu settings for a phys core that doesn't exist
- Verify that the cli is rejected
"""
host = lock_
table_ = host_helper.get_host_cpu_list_table(host)
cores = set(table_parser.get_column(table_, 'phy_core'))
fake_proc_num = 2
while fake_proc_num in cores:
fake_proc_num += 1
fake_proc = 'p{}'.format(fake_proc_num)
map_ = {fake_proc: 1}
LOG.tc_step("Attempt to modify fake processor {}'s function to vSwitch".format(fake_proc))
code, out = host_helper.modify_host_cpu(host, 'vSwitch', fail_ok=True, **map_)
assert 0 != code, "FAIL: Modifying a non existing processor was not rejected"
hosts = system_helper.get_hosts()
name = hosts[len(hosts) - 1] + "a"
while True:
if name not in hosts:
break
name += "a"
LOG.tc_step("Attempt to modify fake host {}'s processor p0 function to vSwitch".format(name))
code, out = host_helper.modify_host_cpu(name, 'vSwitch', p0=1, fail_ok=True)
LOG.tc_step("Verifying that the cli was rejected")
assert 1 == code, "FAIL: Modifying a cpu on a non-existant host was not rejected"
def test_delete_unlocked_node_negative():
"""
Attempts to delete each unlocked node.
Fails if one unlocked node does get deleted.
Test Steps:
- Creates a list of every unlocked host
- Iterate through each host and attempt to delete it
- Verify that each host rejected the delete request
"""
hosts = system_helper.get_hosts(administrative='unlocked')
deleted_nodes = []
for node in hosts:
LOG.tc_step("attempting to delete {}".format(node))
LOG.info("{} state: {}".format(node, system_helper.get_host_values(node, fields='administrative')[0]))
res, out = cli.system('host-delete', node, fail_ok=True)
LOG.tc_step("Delete request - result: {}\tout: {}".format(res, out))
assert 1 == res, "FAIL: The delete request for {} was not rejected".format(node)
LOG.tc_step("Confirming that the node was not deleted")
res, out = cli.system('host-show', node, fail_ok=True)
if 'host not found' in out or res != 0:
# the node was deleted even though it said it wasn't
LOG.tc_step("{} was deleted.".format(node))
deleted_nodes.append(node)
assert not deleted_nodes, "Fail: Delete request for the following node(s) " \
"{} was accepted.".format(deleted_nodes)
def test_create_partition_using_non_existent_device_node():
"""
This test attempts to create a partition using an invalid disk. It is
expected to fail.
Arguments:
* None
Steps:
* Attempt to create a partition on a valid host using an invalid device
node, e.g. /dev/sdz
Teardown:
* None
"""
# Safely hard-coded since we don't have enough physical slots for this to be
# possible
device_node = "/dev/sdz"
size_gib = "1"
computes = system_helper.get_hosts(personality="compute")
hosts = system_helper.get_controllers() + computes
for host in hosts:
LOG.tc_step(
"Creating partition on host {} with size {} using device node {}".
format(host, size_gib, device_node))
rc, out = storage_helper.create_host_partition(host,
device_node,
size_gib,
fail_ok=True)
assert rc != 0, "Partition creation was successful"
def test_ping_hosts():
con_ssh = ControllerClient.get_active_controller()
ping_failed_list = []
for hostname in system_helper.get_hosts():
LOG.tc_step(
"Send 100 pings to {} from Active Controller".format(hostname))
ploss_rate, untran_p = network_helper.ping_server(hostname,
con_ssh,
num_pings=100,
timeout=300,
fail_ok=True)
if ploss_rate > 0:
if ploss_rate == 100:
ping_failed_list.append(
"{}: Packet loss rate: {}/100\n".format(
hostname, ploss_rate))
else:
ping_failed_list.append(
"{}: All packets dropped.\n".format(hostname))
if untran_p > 0:
ping_failed_list.append(
"{}: {}/100 pings are untransmitted within 300 seconds".format(
hostname, untran_p))
LOG.tc_step("Ensure all packets are received.")
assert not ping_failed_list, "Dropped/Un-transmitted packets detected when ping hosts. " \
"Details:\n{}".format(ping_failed_list)
def backup_sensor_data_files(hosts=None, con_ssh=None):
if hosts is None:
hosts = system_helper.get_hosts()
elif isinstance(hosts, str):
hosts = [hosts]
LOG.info("Check and ensure sensor data files for {} are copied to "
"{} if available".format(hosts, HostLinuxUser.get_home()))
hosts_with_file = []
con_ssh = ControllerClient.get_active_controller() if not con_ssh else \
con_ssh
for host in hosts:
dest_path = "{}/hwmond_{}_sensor_data".format(HostLinuxUser.get_home(),
host)
if con_ssh.file_exists(dest_path):
hosts_with_file.append(host)
else:
source_path = BMCPath.SENSOR_DATA_FILE_PATH.format(
BMCPath.SENSOR_DATA_DIR, host)
if con_ssh.file_exists(source_path):
con_ssh.exec_sudo_cmd('cp {} {}'.format(
source_path, dest_path),
fail_ok=False)
hosts_with_file.append(host)
LOG.info("Sensor data files for {} are copied to {}".format(
hosts, HostLinuxUser.get_home()))
return hosts
def sensor_data_fit(request):
LOG.fixture_step("Get hosts with sensor enabled")
hosts = system_helper.get_hosts()
bmc_hosts = []
for host in hosts:
if bmc_helper.get_sensors_table(host=host)['values']:
bmc_hosts.append(host)
if not bmc_hosts:
skip("No sensor added for any host in system")
con_ssh = ControllerClient.get_active_controller()
LOG.fixture_step("(module) Save healthy sensor data files")
bmc_helper.backup_sensor_data_files(bmc_hosts, con_ssh=con_ssh)
LOG.fixture_step("(module) touch /var/run/fit/sensor_data")
con_ssh.exec_sudo_cmd('mkdir -p /var/run/fit/', fail_ok=False)
con_ssh.exec_sudo_cmd('touch /var/run/fit/sensor_data', fail_ok=False)
def _revert():
LOG.fixture_step("(module) rm /var/run/fit/sensor_data")
con_ssh_ = ControllerClient.get_active_controller()
con_ssh_.exec_sudo_cmd('rm /var/run/fit/sensor_data', fail_ok=False)
request.addfinalizer(_revert)
return bmc_hosts
def test_node_install_kpi(collect_kpi):
"""
This test measures the install time for each node in the system.
"""
if not collect_kpi:
skip("KPI only test. Skip due to kpi collection is not enabled")
lab_name = ProjVar.get_var("LAB_NAME")
hosts = system_helper.get_hosts()
print("System has hosts: {}".format(hosts))
log_path = NodeInstall.LOG_PATH
start_cmd = 'head -n 1 {}'.format(log_path)
end_cmd = 'tail -n 1 {}'.format(log_path)
date_cmd = '{} -n 1 /var/log/bash.log'
with host_helper.ssh_to_host('controller-0') as con0_ssh:
bash_start = con0_ssh.exec_sudo_cmd(date_cmd.format('head'),
fail_ok=False)[1]
bash_end = con0_ssh.exec_sudo_cmd(date_cmd.format('tail'),
fail_ok=False)[1]
bash_start = re.findall(TIMESTAMP_PATTERN, bash_start.strip())[0]
bash_end = re.findall(TIMESTAMP_PATTERN, bash_end.strip())[0]
date_ = bash_start.split('T')[0]
def _get_time_delta(start_, end_):
start_ = start_.replace(',', '.')
end_ = end_.replace(',', '.')
start_t = '{}T{}'.format(date_, start_)
end_t = '{}T{}'.format(date_, end_)
time_delta = common.get_timedelta_for_isotimes(start_t,
end_t).total_seconds()
if time_delta < 0:
end_t = '{}T{}'.format(bash_end.split('T')[0], end_)
time_delta = common.get_timedelta_for_isotimes(
start_t, end_t).total_seconds()
return time_delta
for host in hosts:
with host_helper.ssh_to_host(hostname=host) as host_ssh:
start_output = host_ssh.exec_sudo_cmd(start_cmd,
fail_ok=False)[1].strip()
end_output = host_ssh.exec_sudo_cmd(end_cmd,
fail_ok=False)[1].strip()
kpi_name = NodeInstall.NAME.format(host)
start_time = re.findall(NodeInstall.TIMESTAMP_PATTERN, start_output)[0]
end_time = re.findall(NodeInstall.TIMESTAMP_PATTERN, end_output)[0]
install_duration = _get_time_delta(start_time, end_time)
kpi_log_parser.record_kpi(local_kpi_file=collect_kpi,
kpi_name=kpi_name,
log_path=log_path,
lab_name=lab_name,
kpi_val=install_duration,
fail_ok=False)
def test_modify_second_last_partition():
"""
This test attempts to modify a partition that is not the last. It is
expected to fail, since only the very last partition can be modified.
Arguments:
* None
Test steps:
* Create partition1
* Create partition2
* Attempt to modify partition1
Teardown:
* None
"""
global partitions_to_restore
partitions_to_restore = {}
computes = system_helper.get_hosts(personality="compute")
hosts = system_helper.get_controllers() + computes
for host in hosts:
disks = storage_helper.get_host_disks(host)
free_disks = storage_helper.get_host_disks_with_free_space(host, disks)
if not free_disks:
continue
partitions_to_restore[host] = []
for disk_uuid in free_disks:
size_gib = float(free_disks[disk_uuid])
partition_size = "1"
partition_chunks = size_gib / int(partition_size)
if partition_chunks < 3:
LOG.info(
"Skip disk {} due to insufficient space".format(disk_uuid))
continue
LOG.info("Creating first partition on {}".format(host))
uuid = storage_helper.create_host_partition(
host, disk_uuid, partition_size)[1]
partitions_to_restore[host].append(uuid)
LOG.info("Creating second partition on {}".format(host))
uuid1 = storage_helper.create_host_partition(
host, disk_uuid, partition_size)[1]
partitions_to_restore[host].append(uuid1)
LOG.tc_step(
"Modifying partition {} from size {} to size {} from host {} on disk {}"
.format(uuid, partition_size,
int(partition_size) + 1, host, disk_uuid))
rc, out = storage_helper.modify_host_partition(
host, uuid, int(partition_size) + 1, fail_ok=True)
assert rc != 0, "Partition modification was expected to fail but instead was successful"
def delete_images_from_host_registries(con_ssh=None,
auth_info=Tenant.get('admin_platform')):
hosts = system_helper.get_hosts(con_ssh=con_ssh, auth_info=auth_info)
for host in hosts:
with host_helper.ssh_to_host(hostname=host,
con_ssh=con_ssh) as host_ssh:
LOG.info("Delete {} images for host: {}".format(
STX_MONITOR_APP_NAME, host))
container_helper.remove_docker_images_with_pattern(
pattern="elastic", con_ssh=host_ssh, timeout=120)
def test_system_persist_over_host_reboot(host_type, stx_openstack_required):
"""
Validate Inventory summary over reboot of one of the controller see if data persists over reboot
Test Steps:
- capture Inventory summary for list of hosts on system service-list and neutron agent-list
- reboot the current Controller-Active
- Wait for reboot to complete
- Validate key items from inventory persist over reboot
"""
if host_type == 'controller':
host = system_helper.get_active_controller_name()
elif host_type == 'compute':
if system_helper.is_aio_system():
skip("No compute host for AIO system")
host = None
else:
hosts = system_helper.get_hosts(personality='storage')
if not hosts:
skip(msg="Lab has no storage nodes. Skip rebooting storage node.")
host = hosts[0]
LOG.tc_step("Pre-check for system status")
system_helper.wait_for_services_enable()
up_hypervisors = host_helper.get_up_hypervisors()
network_helper.wait_for_agents_healthy(hosts=up_hypervisors)
LOG.tc_step("Launch a vm")
vm_id = vm_helper.boot_vm(cleanup='function')[1]
vm_helper.wait_for_vm_pingable_from_natbox(vm_id)
if host is None:
host = vm_helper.get_vm_host(vm_id)
LOG.tc_step("Reboot a {} node and wait for reboot completes: {}".format(host_type, host))
HostsToRecover.add(host)
host_helper.reboot_hosts(host)
host_helper.wait_for_hosts_ready(host)
LOG.tc_step("Check vm is still active and pingable after {} reboot".format(host))
vm_helper.wait_for_vm_status(vm_id, status=VMStatus.ACTIVE, fail_ok=False)
vm_helper.wait_for_vm_pingable_from_natbox(vm_id=vm_id, timeout=VMTimeout.DHCP_RETRY)
LOG.tc_step("Check neutron agents and system services are in good state after {} reboot".format(host))
network_helper.wait_for_agents_healthy(up_hypervisors)
system_helper.wait_for_services_enable()
if host in up_hypervisors:
LOG.tc_step("Check {} can still host vm after reboot".format(host))
if not vm_helper.get_vm_host(vm_id) == host:
time.sleep(30)
vm_helper.live_migrate_vm(vm_id, destination_host=host)
def test_host_status():
"""
System overview
"""
active_controller_host = system_helper.get_active_controller_name()
LOG.info("Active Controller: {}".format(active_controller_host))
standby_controller_host = system_helper.get_standby_controller_name()
LOG.info("Standby Controller {}".format(standby_controller_host))
host_list = system_helper.get_hosts()
for host in host_list:
LOG.info("Host: {}".format(host))
def test_delete_host_partitions():
"""
This test creates host partitions and the teardown deletes them.
Arguments:
* None
Test Steps:
* Create a partition on each host
Teardown:
* Re-create those partitions
"""
global partitions_to_restore
partitions_to_restore = {}
computes = system_helper.get_hosts(personality="compute")
hosts = system_helper.get_controllers() + computes
usable_disks = False
for host in hosts:
disks = storage_helper.get_host_disks(host)
free_disks = storage_helper.get_host_disks_with_free_space(host, disks)
if not free_disks:
continue
for disk_uuid in free_disks:
size_gib = float(free_disks[disk_uuid])
partition_chunks = int(size_gib)
if partition_chunks < 2:
LOG.info(
"Skip disk {} due to insufficient space".format(disk_uuid))
continue
usable_disks = True
LOG.info("Creating partition on {}".format(host))
rc, out = storage_helper.create_host_partition(host,
disk_uuid,
"1",
fail_ok=False,
wait=False)
assert rc == 0, "Partition creation was expected to succeed but instead failed"
# Check that first disk was created
uuid = table_parser.get_value_two_col_table(
table_parser.table(out), "uuid")
storage_helper.wait_for_host_partition_status(host=host,
uuid=uuid,
timeout=CP_TIMEOUT)
partitions_to_restore[host] = []
partitions_to_restore[host].append(uuid)
# Only test one disk on each host
break
if not usable_disks:
skip("Did not find disks with sufficient space to test with.")
def test_GET_ihosts_host_id_invalidUUID(sysinv_rest):
"""
Test GET of <resource> with valid authentication and upper
case UUID values.
RFC 4122 covers the need for uppercase UUID values
Args:
n/a
Prerequisites: system is running
Test Setups:
n/a
Test Steps:
- Using requests GET <resource> with proper authentication
- Determine if expected status_code of 200 is received
Test Teardown:
n/a
"""
path = "/ihosts/{}/addresses"
r = sysinv_rest
LOG.info(path)
LOG.info(system_helper.get_hosts())
for host in system_helper.get_hosts():
uuid = system_helper.get_host_values(host, 'uuid')[0]
LOG.info("host: {} uuid: {}".format(host, uuid))
message = "Using requests GET {} with proper authentication"
LOG.tc_step(message.format(path))
# shift a->g, b->h, etc - all to generate invalid uuid
shifted_uuid = ''.join(map(lambda x: chr((ord(x)
- ord('a') + 6)
% 26 + ord('a'))
if x in string.ascii_lowercase
else x, uuid.lower()))
status_code, text = r.get(resource=path.format(shifted_uuid),
auth=True)
message = "Retrieved: status_code: {} message: {}"
LOG.info(message.format(status_code, text))
LOG.tc_step("Determine if expected code of 400 is received")
message = "Expected code of 400 - received {} and message {}"
assert status_code == 400, message.format(status_code, text)
def test_kernel_module_signatures():
"""
Test kernel modules are properly signed on all stx hosts.
Steps on each host:
- 'cat /proc/sys/kernel/tainted', ensure value is 4096.
If not, do following steps:
- 'grep --color=never -i "module verification failed"
/var/log/kern.log' to find out failed modules
- 'modinfo <failed_module> | grep --color=never -E "sig|filename"
to display signing info for each module
"""
hosts = system_helper.get_hosts()
failed_hosts = {}
for host in hosts:
with host_helper.ssh_to_host(host) as host_ssh:
LOG.tc_step(
"Check for unassigned kernel modules on {}".format(host))
output = host_ssh.exec_cmd('cat /proc/sys/kernel/tainted',
fail_ok=False)[1]
output_binary = '{0:b}'.format(int(output))
unassigned_module_bit = '0'
# 14th bit is to flag unassigned module
if len(output_binary) >= 14:
unassigned_module_bit = output_binary[-14]
if unassigned_module_bit != '0':
LOG.error(
"Kernel module verification(s) failed on {}. Collecting "
"more info".format(host))
LOG.tc_step(
"Check kern.log for modules with failed verification")
failed_modules = []
err_out = host_ssh.exec_cmd(
'grep --color=never -i "module verification failed" '
'/var/log/kern.log')[1]
for line in err_out.splitlines():
module = re.findall(r'\] (.*): module verification failed',
line)[0].strip()
if module not in failed_modules:
failed_modules.append(module)
failed_hosts[host] = failed_modules
LOG.tc_step("Display signing info for {} failed kernel "
"modules: {}".format(host, failed_modules))
for module in failed_modules:
host_ssh.exec_cmd('modinfo {} | grep --color=never -E '
'"sig|filename"'.format(module))
assert not failed_hosts, "Kernel module signature verification " \
"failed on: {}".format(failed_hosts)
def pre_configs(request):
"""
Dovetail test fixture
Args:
request:
- configure sshd_config on tis hosts to allow root access
- update conf files on dovetail test node on cumulus
"""
if not ComplianceVar.get_var('DOVETAIL_SUITE'):
skip('--dovetail-suite unspecified.')
try:
import yaml
except ImportError:
skip('pyymal package is not installed.')
computes = host_helper.get_up_hypervisors()
if len(computes) < 2:
skip('Less than 2 computes in available states')
active, standby = system_helper.get_active_standby_controllers()
if not standby:
skip('No standby controller on system')
LOG.fixture_step(
"Ensure dovetail test node mgmt nic connects to lab under test")
compliance_helper.update_dovetail_mgmt_interface()
controllers = [active, standby]
storages = system_helper.get_hosts(personality='storage',
availability=HostAvailState.AVAILABLE)
hosts_dict = {
'controller': controllers,
'compute': computes,
'storage': storages
}
all_hosts = list(set(controllers + computes + storages))
LOG.fixture_step(
"Enable port_security for the system and update existing networks")
port_security = network_helper.get_network_values(
'external-net0', 'port_security_enabled')[0]
port_security = eval(port_security)
if not port_security:
system_helper.add_ml2_extension_drivers(drivers='port_security')
networks = network_helper.get_networks(auth_info=Tenant.get('admin'))
for net in networks:
network_helper.set_network(net_id=net, enable_port_security=True)
configure_tis(all_hosts, request=request)
configure_dovetail_server(hosts_per_personality=hosts_dict)
def test_create_many_small_host_partitions_on_a_single_host():
"""
This test attempts to create multiple tiny partitions on a single host.
Assumptions:
* There's some free disk space available
Test steps:
* Query the hosts to determine disk space
* Create small partitions until the disk space is consumed
* Repeat on all applicable hosts
Teardown:
* Delete created partitions
"""
global partitions_to_restore
partitions_to_restore = {}
computes = system_helper.get_hosts(personality="compute")
hosts = system_helper.get_controllers() + computes
usable_disks = False
for host in hosts:
partitions_to_restore[host] = []
disks = storage_helper.get_host_disks(host)
free_disks = storage_helper.get_host_disks_with_free_space(host, disks)
if not free_disks:
continue
for disk_uuid in free_disks:
size_gib = float(free_disks[disk_uuid])
num_partitions = 2
if size_gib <= num_partitions:
LOG.info("Skipping disk {} due to insufficient space".format(
disk_uuid))
continue
partition_chunks = int(size_gib / num_partitions)
usable_disks = True
LOG.info("Creating partition on {}".format(host))
# partitions_to_restore[host] = []
for i in range(0, num_partitions):
uuid = storage_helper.create_host_partition(
host, disk_uuid, partition_chunks)[1]
partitions_to_restore[host].append(uuid)
# Only test one disk on each host
break
# Only test one host (otherwise takes too long)
if usable_disks:
break
if not usable_disks:
skip("Did not find disks with sufficient space to test with.")
def delete_all_monitor_labels(con_ssh=None,
auth_info=Tenant.get('admin_platform')):
LOG.info("Delete monitor labels from hosts")
host_list = system_helper.get_hosts(con_ssh=con_ssh, auth_info=auth_info)
for host in host_list:
# Remove all monitor labels from all hosts on the system
host_helper.remove_host_labels(host,
STX_MONITOR_LABELS,
lock=False,
unlock=False,
con_ssh=con_ssh,
auth_info=auth_info)
def lock_(request):
hosts = system_helper.get_hosts()
host = hosts[0]
if hosts[0] == system_helper.get_active_controller_name():
if not system_helper.is_aio_simplex():
host = hosts[1]
host_helper.lock_host(host)
def unlock_():
host_helper.unlock_host(host)
request.addfinalizer(unlock_)
return host
def test_GET_various_host_id_valid(sysinv_rest, path):
"""
Test GET of <resource> with valid authentication.
Args:
sysinv_rest
path
Prerequisites: system is running
Test Setups:
n/a
Test Steps:
- Using requests GET <resource> with proper authentication
- Determine if expected status_code of 200 is received
Test Teardown:
n/a
"""
r = sysinv_rest
path = re.sub("-", "{}", path)
LOG.info(path)
LOG.info(system_helper.get_hosts())
for host in system_helper.get_hosts():
uuid = system_helper.get_host_values(host, 'uuid')[0]
res = path.format(uuid)
message = "Using requests GET {} with proper authentication"
LOG.tc_step(message.format(res))
status_code, text = r.get(resource=res, auth=True)
message = "Retrieved: status_code: {} message: {}"
LOG.info(message.format(status_code, text))
if status_code == 404:
pytest.skip("Unsupported resource in this configuration.")
else:
message = "Determine if expected code of 200 is received"
LOG.tc_step(message)
message = "Expected code of 200 - received {} and message {}"
assert status_code == 200, message.format(status_code, text)
