def hpai_body(self):
""" Create a body with HPAI information.
This is used for disconnect and connection state requests.
"""
body = []
# ============ IP Body ==========
body.extend([self.channel]) # Communication Channel Id
body.extend([0x00]) # Reserverd
# =========== Client HPAI ===========
body.extend([0x08]) # HPAI Length
body.extend([0x01]) # Host Protocol
# Tunnel Client Socket IP
body.extend(ip_to_array(self.control_socket.getsockname()[0]))
# Tunnel Client Socket Port
body.extend(int_to_array(self.control_socket.getsockname()[1]))
return body
def hpai_body(self):
""" Create a body with HPAI information.
This is used for disconnect and connection state requests.
"""
body = []
# ============ IP Body ==========
body.extend([self.channel]) # Communication Channel Id
body.extend([0x00]) # Reserverd
# =========== Client HPAI ===========
body.extend([0x08]) # HPAI Length
body.extend([0x01]) # Host Protocol
# Tunnel Client Socket IP
body.extend(ip_to_array(self.control_socket.getsockname()[0]))
# Tunnel Client Socket Port
body.extend(int_to_array(self.control_socket.getsockname()[1]))
return body
def _build_search_request_data(requestor_ipaddress, requestor_port):
"""
Build a KNX IP Search Request Broadcast Package
:param requestor_ipaddress: IP Address of the Search Request
Response Receiver
:param requestor_port: Port of the Search Request Response Receiver
:return: Complete Search Request Broadcast Package
:rtype: bytes
"""
req = []
req.extend([0x06]) # HeaderSize
req.extend([0x10]) # KNXNetIP Version
req.extend([0x02, 0x01]) # Search Reques°t
req.extend([0x00, 0x0E]) # HEADER_SIZE_10 + sizeof(HPAI)
# ==== Discovery Endpoint HPAI ====
req.extend([0x08]) # Struct Length
req.extend([0x01]) # Host Protocol Code = 0x01 = IPV4_UDP
req.extend(ip_to_array(requestor_ipaddress))
req.extend(int_to_array(requestor_port))
return bytes(req)
def _build_search_request_data(requestor_ipaddress, requestor_port):
"""
Build a KNX IP Search Request Broadcast Package
:param requestor_ipaddress: IP Address of the Search Request
Response Receiver
:param requestor_port: Port of the Search Request Response Receiver
:return: Complete Search Request Broadcast Package
:rtype: bytes
"""
req = []
req.extend([0x06]) # HeaderSize
req.extend([0x10]) # KNXNetIP Version
req.extend([0x02, 0x01]) # Search Reques°t
req.extend([0x00, 0x0E]) # HEADER_SIZE_10 + sizeof(HPAI)
# ==== Discovery Endpoint HPAI ====
req.extend([0x08]) # Struct Length
req.extend([0x01]) # Host Protocol Code = 0x01 = IPV4_UDP
req.extend(ip_to_array(requestor_ipaddress))
req.extend(int_to_array(requestor_port))
return bytes(req)
def connect(self, timeout=2):
"""Connect to the KNX/IP tunnelling interface.
If the remote address is "0.0.0.0", it will use the Gateway scanner
to automatically detect a KNX gateway and it will connect to it if one
has been found.
Returns true if a connection could be established, false otherwise
"""
if self.connected:
logging.info("KNXIPTunnel connect request ignored, "
"already connected")
return True
if self.remote_ip == "0.0.0.0":
scanner = GatewayScanner()
try:
ipaddr, port = scanner.start_search()
logging.info("Found KNX gateway %s/%s", ipaddr, port)
self.remote_ip = ipaddr
self.remote_port = port
except TypeError:
logging.error("No KNX/IP gateway given and no gateway "
"found by scanner, aborting %s")
# Clean up cache
self.value_cache.clear()
# Find my own IP
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
sock.connect((self.remote_ip, self.remote_port))
local_ip = sock.getsockname()[0]
if self.data_server:
logging.info("Data server already running, not starting again")
else:
self.data_server = DataServer((local_ip, 0), DataRequestHandler,
self)
dummy_ip, self.data_port = self.data_server.server_address
data_server_thread = threading.Thread(
target=self.data_server.serve_forever)
data_server_thread.daemon = True
data_server_thread.start()
logging.debug("Started data server on UDP port %s", self.data_port)
self.control_socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
self.control_socket.bind((local_ip, 0))
self.control_socket.settimeout(timeout)
# Connect packet
frame = KNXIPFrame(KNXIPFrame.CONNECT_REQUEST)
# Control endpoint
body = []
body.extend([0x08, 0x01]) # length 8 bytes, UPD
dummy_ip, port = self.control_socket.getsockname()
body.extend(ip_to_array(local_ip))
body.extend(int_to_array(port, 2))
# Data endpoint
body.extend([0x08, 0x01]) # length 8 bytes, UPD
body.extend(ip_to_array(local_ip))
body.extend(int_to_array(self.data_port, 2))
#
body.extend([0x04, 0x04, 0x02, 0x00])
frame.body = body
try:
self.control_socket.sendto(bytes(frame.to_frame()),
(self.remote_ip, self.remote_port))
received = self.control_socket.recv(1024)
except socket.error:
self.control_socket.close()
self.control_socket = None
logging.error("KNX/IP gateway did not respond to connect request")
return False
# Check if the response is an TUNNELING ACK
r_sid = received[2] * 256 + received[3]
if r_sid == KNXIPFrame.CONNECT_RESPONSE:
self.channel = received[6]
status = received[7]
if status == 0:
hpai = received[8:10]
logging.debug("Connected KNX IP tunnel " +
"(Channel: {}, HPAI: {} {})".format(
self.channel, hpai[0], hpai[1]))
else:
logging.error(
"KNX IP tunnel connect error:" +
"(Channel: {}, Status: {})".format(self.channel, status))
return False
else:
logging.error("Could not initiate tunnel connection, STI = {0:%s}",
r_sid)
return False
self.connected = True
return True
def connect(self, timeout=2):
"""Connect to the KNX/IP tunnelling interface.
If the remote address is "0.0.0.0", it will use the Gateway scanner
to automatically detect a KNX gateway and it will connect to it if one
has been found.
Returns true if a connection could be established, false otherwise
"""
if self.connected:
logging.info("KNXIPTunnel connect request ignored, "
"already connected")
return True
if self.remote_ip == "0.0.0.0":
scanner = GatewayScanner()
try:
ipaddr, port = scanner.start_search()
logging.info("Found KNX gateway %s/%s", ipaddr, port)
self.remote_ip = ipaddr
self.remote_port = port
except TypeError:
logging.error("No KNX/IP gateway given and no gateway "
"found by scanner, aborting %s")
# Clean up cache
self.value_cache.clear()
# Find my own IP
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
sock.connect((self.remote_ip, self.remote_port))
local_ip = sock.getsockname()[0]
if self.data_server:
logging.info("Data server already running, not starting again")
else:
self.data_server = DataServer((local_ip, 0),
DataRequestHandler,
self)
dummy_ip, self.data_port = self.data_server.server_address
data_server_thread = threading.Thread(
target=self.data_server.serve_forever)
data_server_thread.daemon = True
data_server_thread.start()
logging.debug(
"Started data server on UDP port %s", self.data_port)
self.control_socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
self.control_socket.bind((local_ip, 0))
self.control_socket.settimeout(timeout)
# Connect packet
frame = KNXIPFrame(KNXIPFrame.CONNECT_REQUEST)
# Control endpoint
body = []
body.extend([0x08, 0x01]) # length 8 bytes, UPD
dummy_ip, port = self.control_socket.getsockname()
body.extend(ip_to_array(local_ip))
body.extend(int_to_array(port, 2))
# Data endpoint
body.extend([0x08, 0x01]) # length 8 bytes, UPD
body.extend(ip_to_array(local_ip))
body.extend(int_to_array(self.data_port, 2))
#
body.extend([0x04, 0x04, 0x02, 0x00])
frame.body = body
try:
self.control_socket.sendto(bytes(frame.to_frame()),
(self.remote_ip, self.remote_port))
received = self.control_socket.recv(1024)
except socket.error:
self.control_socket = None
logging.error("KNX/IP gateway did not respond to connect request")
return False
# Check if the response is an TUNNELING ACK
r_sid = received[2] * 256 + received[3]
if r_sid == KNXIPFrame.CONNECT_RESPONSE:
self.channel = received[6]
status = received[7]
if status == 0:
hpai = received[8:10]
logging.debug("Connected KNX IP tunnel " +
"(Channel: {}, HPAI: {} {})".format(
self.channel, hpai[0], hpai[1]))
else:
logging.error("KNX IP tunnel connect error:" +
"(Channel: {}, Status: {})".format(
self.channel, status))
return False
else:
logging.error(
"Could not initiate tunnel connection, STI = {0:%s}", r_sid)
return False
self.connected = True
return True