def __init__(self,
theBank,
theMode,
theRoach=None,
theValon=None,
hpc_macs=None,
unit_test=False):
"""
Creates an instance of the vegas internals for the L8LBW firmware.
"""
#print str(theMode)
# mode_number may be treated as a constant; the Player will
# delete this backend object and create a new one on mode
# change.
VegasLBWBackend.__init__(self, theBank, theMode, \
theRoach , theValon, hpc_macs, unit_test)
if 'lbw8' in theMode.backend_name.lower():
nsubbands = 8
else:
nsubbands = 1
self.nsubbands = nsubbands
if not self.gain:
self.gain = [1024] * nsubbands
# default dependent values, computed from Parameters:
# a resonable default:
self.subbandfreq = [convertToMHz(self.frequency / 2) * 1.0e6
] * nsubbands
self.actual_subband_freq = self.subbandfreq
# L8 specific parameters
self.params["subband_freq"] = self._setSubbandFreq
self.lbwmixer = LBWMixerCalcs(self.frequency)
self.progdev()
self.net_config()
if self.mode.roach_kvpairs:
self.write_registers(**self.mode.roach_kvpairs)
self.reset_roach()
self.clear_switching_states()
self.add_switching_state(1.0, blank=False, cal=False, sig_ref_1=False)
self.prepare()
self.start_hpc()
self.start_fits_writer()
self._init_gpu_resources()
def __init__(self, theBank, theMode, theRoach=None, theValon=None, hpc_macs=None, unit_test = False):
"""
Creates an instance of the vegas internals for the L8LBW firmware.
"""
#print str(theMode)
# mode_number may be treated as a constant; the Player will
# delete this backend object and create a new one on mode
# change.
VegasLBWBackend.__init__(self, theBank, theMode, \
theRoach , theValon, hpc_macs, unit_test)
if 'lbw8' in theMode.backend_name.lower():
nsubbands = 8
else:
nsubbands = 1
self.nsubbands = nsubbands
if not self.gain:
self.gain = [ 1024 ] * nsubbands
# default dependent values, computed from Parameters:
# a resonable default:
self.subbandfreq = [ convertToMHz(self.frequency/2) * 1.0e6 ] * nsubbands
self.actual_subband_freq = self.subbandfreq
# L8 specific parameters
self.params["subband_freq" ] = self._setSubbandFreq
self.lbwmixer = LBWMixerCalcs(self.frequency)
self.progdev()
self.net_config()
if self.mode.roach_kvpairs:
self.write_registers(**self.mode.roach_kvpairs)
self.reset_roach()
self.clear_switching_states()
self.add_switching_state(1.0, blank = False, cal = False, sig_ref_1 = False)
self.prepare()
self.start_hpc()
self.start_fits_writer()
self._init_gpu_resources()
class VegasL8LBWBackend(VegasLBWBackend):
"""
A class which implements some of the VEGAS specific parameter calculations
for the L8LBW1 and L8LBW8 modes.
VegasL8LBWBackend(theBank, theMode, theRoach = None, theValon = None)
Where:
* *theBank:* Instance of specific bank configuration data BankData.
* *theMode:* Instance of specific mode configuration data ModeData.
* *theRoach:* Instance of katcp_wrapper
* *theValon:* instance of ValonKATCP
* *unit_test:* Set to true to unit test. Will not attempt to talk to
roach, shared memory, etc.
"""
def __init__(self, theBank, theMode, theRoach=None, theValon=None, hpc_macs=None, unit_test = False):
"""
Creates an instance of the vegas internals for the L8LBW firmware.
"""
#print str(theMode)
# mode_number may be treated as a constant; the Player will
# delete this backend object and create a new one on mode
# change.
VegasLBWBackend.__init__(self, theBank, theMode, \
theRoach , theValon, hpc_macs, unit_test)
if 'lbw8' in theMode.backend_name.lower():
nsubbands = 8
else:
nsubbands = 1
self.nsubbands = nsubbands
if not self.gain:
self.gain = [ 1024 ] * nsubbands
# default dependent values, computed from Parameters:
# a resonable default:
self.subbandfreq = [ convertToMHz(self.frequency/2) * 1.0e6 ] * nsubbands
self.actual_subband_freq = self.subbandfreq
# L8 specific parameters
self.params["subband_freq" ] = self._setSubbandFreq
self.lbwmixer = LBWMixerCalcs(self.frequency)
self.progdev()
self.net_config()
if self.mode.roach_kvpairs:
self.write_registers(**self.mode.roach_kvpairs)
self.reset_roach()
self.clear_switching_states()
self.add_switching_state(1.0, blank = False, cal = False, sig_ref_1 = False)
self.prepare()
self.start_hpc()
self.start_fits_writer()
self._init_gpu_resources()
def __del__(self):
"""
Perform some cleanup tasks.
"""
VegasBackend.__del__(self)
def _sampler_frequency_dep(self):
"""
Computes the effective frequency of the A/D sampler based on mode
"""
self.sampler_frequency = convertToMHz(self.frequency) * 1e6 / 32
def _mixer_cnt_dep(self):
"""
This is a calculated non-user-settable parameter, which specifies the length
of the LO bram tables.
For now this should be the bram_size - 2 i.e. (1<<10) - 2
In the 8 subwindow mode, all mixer_cnt registers are set,
in the 1 subwindow mode, only the first mixer_cnt register is set.
"""
LOG_LO_BRAM_LENGTH = 10
reg_size = (1<<LOG_LO_BRAM_LENGTH)-2 # length of each BRAM register
for i in range(self.nsubbands):
reg_val = { "s" + str(i) + "_mixer_cnt" : reg_size }
self.set_register(**reg_val)
def _mode_select_dep(self):
"""
Sets the mode_sel register based on the number of subbands
Zero specifies 8 band mode, 1 specifies 1 band mode
"""
# base the value on the LSB bit of the number of subbands (has the correct sense)
value = self.nsubbands & 0x1
self.set_register(mode_sel=value)
def _setSubbandFreq(self, subbandfreq):
"""
A list specifying the frequencies for each subband for a given bank.
Should probably check to verify len(subbandfreq) is consistent with current mode.
"""
if not isinstance(subbandfreq, list) or len(subbandfreq) not in [1,8]:
raise Exception("The parameter 'subband_frq_list' " \
"must be a list of 1 or 8 frequencies for each bank subband")
# convert the list of values into Hz
self.subbandfreq = []
for subband in range(len(subbandfreq)):
self.subbandfreq.append(convertToMHz(subbandfreq[subband]) *1e6)
def _setNumberSubbands(self, nsubbands):
"""
Selects the Number of subbands. Legal values are 1 or 8.
NOTE: This should not be a user parameter, better to have it specified by config file/mode.
"""
if nsubbands not in [1,8]:
raise Exception("number of sub-bands must be 1 or 8.")
self.nsubbands = nsubbands
def _subfreq_dep(self):
"""
Compute the baseband frequencies for each sub-band.
"""
# tell the mixer utility what the valon frequency is
self.lbwmixer.set_valon_frequency(self.frequency)
print "nsubbands is ", len(self.subbandfreq)
print "we think it ", self.nsubbands
if self.nsubbands == 1:
if len(self.subbandfreq) < 1:
raise Exception("The number of subband frequencies is not 1")
else:
if len(self.subbandfreq) != 8:
raise Exception("The number of subband frequencies is not 8")
# clear out previous results
self.lbwmixer.clear_results()
# calculate the nearest lo frequency and save it for writing the SUBxFREQ keywords
self.actual_subband_freq = []
for subband_num in range(len(self.subbandfreq)):
_,actual_lo = self.lbwmixer.lo_setup(self.subbandfreq[subband_num], subband_num)
self.actual_subband_freq.append(actual_lo)
mixerdict = self.lbwmixer.get_lo_results()
for i in mixerdict.keys():
kwval = { i : mixerdict[i] }
self.set_register(**kwval)
def _gain_dep(self):
"""
Do the quantization gain calculation and append the result to the register dictionary
"""
for subband in range(self.nsubbands):
kwval = { 's'+str(subband)+'_quant_gain' : self.gain[subband] }
self.set_register(**kwval)
def prepare(self):
"""
This command writes calculated values to the hardware and status memory.
This command should be run prior to the first scan to properly setup
the hardware.
The sequence of commands to set up a measurement is thus typically::
be.set_param(...)
be.set_param(...)
...
be.set_param(...)
be.prepare()
"""
super(VegasL8LBWBackend, self).prepare()
self._subfreq_dep()
self._gain_dep()
self._mode_select_dep()
self._mixer_cnt_dep()
# though parent has already called this, call again because the
# three calls above have added things.
self._set_state_table_keywords()
# Talk to outside things: status memory, HPC programs, roach
if self.bank is not None:
self.write_status(**self.status_mem_local)
else:
for i in self.status_mem_local.keys():
print "%s = %s" % (i, self.status_mem_local[i])
if self.roach:
self.write_registers(**self.roach_registers_local)
def _set_state_table_keywords(self):
"""Update status memory keywords. Calls the base class version first to
get a dictionary with the default base class values set, then
adds/modifies kvpairs specific to this mode, and finally writes
the data to shared memory.
"""
# Add some additional keyword value pairs.
super(VegasL8LBWBackend, self)._set_state_table_keywords()
self.set_status(NSUBBAND = str(self.nsubbands))
# In the case of LBW1, we replicate the one subband frequency into all 8 keywords
if len(self.actual_subband_freq) == 1:
sub_band_frequencies = [ self.actual_subband_freq[0] ] * 8
else:
sub_band_frequencies = self.actual_subband_freq
statusdata = {}
print str(self.subbandfreq)
for i in range(len(sub_band_frequencies)):
print "SUB%iFREQ =" % (i), str(sub_band_frequencies[i])
statusdata["SUB%iFREQ" % (i)] = str(sub_band_frequencies[i])
for i in range(self.nsubbands):
statusdata["_MCR1_%02d" % (i+1)] = str(self.chan_bw)
statusdata["_MCDL_%02d" % (i+1)] = str(self.chan_bw)
statusdata["_MFQR_%02d" % (i+1)] = str(self.frequency_resolution)
self.status_mem_local.update(statusdata)
class VegasL8LBWBackend(VegasLBWBackend):
"""
A class which implements some of the VEGAS specific parameter calculations
for the L8LBW1 and L8LBW8 modes.
VegasL8LBWBackend(theBank, theMode, theRoach = None, theValon = None)
Where:
* *theBank:* Instance of specific bank configuration data BankData.
* *theMode:* Instance of specific mode configuration data ModeData.
* *theRoach:* Instance of katcp_wrapper
* *theValon:* instance of ValonKATCP
* *unit_test:* Set to true to unit test. Will not attempt to talk to
roach, shared memory, etc.
"""
def __init__(self,
theBank,
theMode,
theRoach=None,
theValon=None,
hpc_macs=None,
unit_test=False):
"""
Creates an instance of the vegas internals for the L8LBW firmware.
"""
#print str(theMode)
# mode_number may be treated as a constant; the Player will
# delete this backend object and create a new one on mode
# change.
VegasLBWBackend.__init__(self, theBank, theMode, \
theRoach , theValon, hpc_macs, unit_test)
if 'lbw8' in theMode.backend_name.lower():
nsubbands = 8
else:
nsubbands = 1
self.nsubbands = nsubbands
if not self.gain:
self.gain = [1024] * nsubbands
# default dependent values, computed from Parameters:
# a resonable default:
self.subbandfreq = [convertToMHz(self.frequency / 2) * 1.0e6
] * nsubbands
self.actual_subband_freq = self.subbandfreq
# L8 specific parameters
self.params["subband_freq"] = self._setSubbandFreq
self.lbwmixer = LBWMixerCalcs(self.frequency)
self.progdev()
self.net_config()
if self.mode.roach_kvpairs:
self.write_registers(**self.mode.roach_kvpairs)
self.reset_roach()
self.clear_switching_states()
self.add_switching_state(1.0, blank=False, cal=False, sig_ref_1=False)
self.prepare()
self.start_hpc()
self.start_fits_writer()
self._init_gpu_resources()
def __del__(self):
"""
Perform some cleanup tasks.
"""
VegasBackend.__del__(self)
def _sampler_frequency_dep(self):
"""
Computes the effective frequency of the A/D sampler based on mode
"""
self.sampler_frequency = convertToMHz(self.frequency) * 1e6 / 32
def _mixer_cnt_dep(self):
"""
This is a calculated non-user-settable parameter, which specifies the length
of the LO bram tables.
For now this should be the bram_size - 2 i.e. (1<<10) - 2
In the 8 subwindow mode, all mixer_cnt registers are set,
in the 1 subwindow mode, only the first mixer_cnt register is set.
"""
LOG_LO_BRAM_LENGTH = 10
reg_size = (
1 << LOG_LO_BRAM_LENGTH) - 2 # length of each BRAM register
for i in range(self.nsubbands):
reg_val = {"s" + str(i) + "_mixer_cnt": reg_size}
self.set_register(**reg_val)
def _mode_select_dep(self):
"""
Sets the mode_sel register based on the number of subbands
Zero specifies 8 band mode, 1 specifies 1 band mode
"""
# base the value on the LSB bit of the number of subbands (has the correct sense)
value = self.nsubbands & 0x1
self.set_register(mode_sel=value)
def _setSubbandFreq(self, subbandfreq):
"""
A list specifying the frequencies for each subband for a given bank.
Should probably check to verify len(subbandfreq) is consistent with current mode.
"""
if not isinstance(subbandfreq, list) or len(subbandfreq) not in [1, 8]:
raise Exception("The parameter 'subband_frq_list' " \
"must be a list of 1 or 8 frequencies for each bank subband")
# convert the list of values into Hz
self.subbandfreq = []
for subband in range(len(subbandfreq)):
self.subbandfreq.append(convertToMHz(subbandfreq[subband]) * 1e6)
def _setNumberSubbands(self, nsubbands):
"""
Selects the Number of subbands. Legal values are 1 or 8.
NOTE: This should not be a user parameter, better to have it specified by config file/mode.
"""
if nsubbands not in [1, 8]:
raise Exception("number of sub-bands must be 1 or 8.")
self.nsubbands = nsubbands
def _subfreq_dep(self):
"""
Compute the baseband frequencies for each sub-band.
"""
# tell the mixer utility what the valon frequency is
self.lbwmixer.set_valon_frequency(self.frequency)
print "nsubbands is ", len(self.subbandfreq)
print "we think it ", self.nsubbands
if self.nsubbands == 1:
if len(self.subbandfreq) < 1:
raise Exception("The number of subband frequencies is not 1")
else:
if len(self.subbandfreq) != 8:
raise Exception("The number of subband frequencies is not 8")
# clear out previous results
self.lbwmixer.clear_results()
# calculate the nearest lo frequency and save it for writing the SUBxFREQ keywords
self.actual_subband_freq = []
for subband_num in range(len(self.subbandfreq)):
_, actual_lo = self.lbwmixer.lo_setup(
self.subbandfreq[subband_num], subband_num)
self.actual_subband_freq.append(actual_lo)
mixerdict = self.lbwmixer.get_lo_results()
for i in mixerdict.keys():
kwval = {i: mixerdict[i]}
self.set_register(**kwval)
def _gain_dep(self):
"""
Do the quantization gain calculation and append the result to the register dictionary
"""
for subband in range(self.nsubbands):
kwval = {'s' + str(subband) + '_quant_gain': self.gain[subband]}
self.set_register(**kwval)
def prepare(self):
"""
This command writes calculated values to the hardware and status memory.
This command should be run prior to the first scan to properly setup
the hardware.
The sequence of commands to set up a measurement is thus typically::
be.set_param(...)
be.set_param(...)
...
be.set_param(...)
be.prepare()
"""
super(VegasL8LBWBackend, self).prepare()
self._subfreq_dep()
self._gain_dep()
self._mode_select_dep()
self._mixer_cnt_dep()
# though parent has already called this, call again because the
# three calls above have added things.
self._set_state_table_keywords()
# Talk to outside things: status memory, HPC programs, roach
if self.bank is not None:
self.write_status(**self.status_mem_local)
else:
for i in self.status_mem_local.keys():
print "%s = %s" % (i, self.status_mem_local[i])
if self.roach:
self.write_registers(**self.roach_registers_local)
def _set_state_table_keywords(self):
"""Update status memory keywords. Calls the base class version first to
get a dictionary with the default base class values set, then
adds/modifies kvpairs specific to this mode, and finally writes
the data to shared memory.
"""
# Add some additional keyword value pairs.
super(VegasL8LBWBackend, self)._set_state_table_keywords()
self.set_status(NSUBBAND=str(self.nsubbands))
# In the case of LBW1, we replicate the one subband frequency into all 8 keywords
if len(self.actual_subband_freq) == 1:
sub_band_frequencies = [self.actual_subband_freq[0]] * 8
else:
sub_band_frequencies = self.actual_subband_freq
statusdata = {}
print str(self.subbandfreq)
for i in range(len(sub_band_frequencies)):
print "SUB%iFREQ =" % (i), str(sub_band_frequencies[i])
statusdata["SUB%iFREQ" % (i)] = str(sub_band_frequencies[i])
for i in range(self.nsubbands):
statusdata["_MCR1_%02d" % (i + 1)] = str(self.chan_bw)
statusdata["_MCDL_%02d" % (i + 1)] = str(self.chan_bw)
statusdata["_MFQR_%02d" % (i + 1)] = str(self.frequency_resolution)
self.status_mem_local.update(statusdata)
