def test_jumpToSeefloorSlice_badFramesEmpty(self):
# Setup
pixels_in_frame = Frame.FRAME_HEIGHT
pixels_in_half_frame = int(pixels_in_frame / 2)
drifts_df = pd.DataFrame()
drifts_df = self.__append_to_drifts_df(drifts_df, 100, 0, 0)
drifts_df = self.__append_to_drifts_df(drifts_df, 200, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 300, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 400, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 500, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 600, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 700, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 800, 0,
pixels_in_half_frame)
driftData = DriftData(drifts_df)
#badframes_df = pd.DataFrame()
badframes_df = BadFramesData.create_empty_df()
badframesData = BadFramesData.createFromDataFrame(None, badframes_df)
# --- good frames are 150-574 and 625-689. startFrame is 100, endFrame is 700
seeFloor = SeeFloor(driftData, badframesData, None, None)
# Exercise
# Assert
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(
10, 1)) # if parameter is out of bounds show first/last frame
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(99, 1))
self.assertEqual(300, seeFloor.jumpToSeefloorSlice(100, 1))
self.assertEqual(600, seeFloor.jumpToSeefloorSlice(200, 2))
self.assertEqual(600, seeFloor.jumpToSeefloorSlice(800, -1))
self.assertEqual(400, seeFloor.jumpToSeefloorSlice(800, -2))
self.assertEqual(500, seeFloor.jumpToSeefloorSlice(700, -1))
self.assertEqual(300, seeFloor.jumpToSeefloorSlice(700, -2))
def test_jumpToSeefloorSlice_fractionalFrameWithoutBadBlocks(self):
# Setup
pixels_in_frame = Frame.FRAME_HEIGHT
pixels_in_half_frame = int(pixels_in_frame / 2)
drifts_df = pd.DataFrame()
drifts_df = self.__append_to_drifts_df(drifts_df, 100, 0, 0)
drifts_df = self.__append_to_drifts_df(drifts_df, 200, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 300, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 400, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 500, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 600, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 700, 0,
pixels_in_half_frame)
driftData = DriftData(drifts_df)
badframesData = BadFramesData(None, None)
seeFloor = SeeFloor(driftData, badframesData, None, None)
# Exercise
# Assert
self.assertEqual(300, seeFloor.jumpToSeefloorSlice(200, 0.5))
self.assertEqual(267, seeFloor.jumpToSeefloorSlice(200, 0.33333))
self.assertEqual(350, seeFloor.jumpToSeefloorSlice(200, 0.75))
self.assertEqual(450, seeFloor.jumpToSeefloorSlice(200, 1.25))
self.assertEqual(500, seeFloor.jumpToSeefloorSlice(200, 1.5))
self.assertEqual(500, seeFloor.jumpToSeefloorSlice(600, -0.5))
self.assertEqual(290, seeFloor.jumpToSeefloorSlice(600, -1.55))
def test_jumpToSeefloorSlice(self):
# Setup
drifts_df = pd.DataFrame()
drifts_df = self.__append_to_drifts_df(drifts_df, 93, 0, 0)
drifts_df = self.__append_to_drifts_df(drifts_df, 95, 0, 16)
drifts_df = self.__append_to_drifts_df(drifts_df, 100, 0, 16)
drifts_df = self.__append_to_drifts_df(drifts_df, 102, 0, 16)
drifts_df = self.__append_to_drifts_df(drifts_df, 98, 0, 16)
drifts_df = self.__append_to_drifts_df(drifts_df, 104, 0, 16)
drifts_df = self.__append_to_drifts_df(drifts_df, 107, 0, 16)
driftData = DriftData(drifts_df)
badframes_df = pd.DataFrame()
badframes_df = self.__append_to_badframes_df(badframes_df, 99, 101)
badframes_df = self.__append_to_badframes_df(badframes_df, 104, 108)
badframes_df = self.__append_to_badframes_df(badframes_df, 92, 95)
badframesData = BadFramesData.createFromDataFrame(None, badframes_df)
#--- good frames are 96,97,98 and 102,103. startFrame is 93, endFrame is 107
seeFloor = SeeFloor(driftData, badframesData, None, None)
# Exercise
# Assert
self.assertEqual(93, seeFloor.jumpToSeefloorSlice(
-333, 1)) # if parameter is out of bounds show first/last frame
self.assertEqual(93, seeFloor.jumpToSeefloorSlice(91, 1))
self.assertEqual(93, seeFloor.jumpToSeefloorSlice(92, 1))
self.assertEqual(96, seeFloor.jumpToSeefloorSlice(93, 1))
self.assertEqual(96, seeFloor.jumpToSeefloorSlice(94, 1))
self.assertEqual(96, seeFloor.jumpToSeefloorSlice(95, 1))
self.assertEqual(98, seeFloor.jumpToSeefloorSlice(96, 1))
self.assertEqual(98, seeFloor.jumpToSeefloorSlice(97, 1))
self.assertEqual(102, seeFloor.jumpToSeefloorSlice(98, 1))
self.assertEqual(102, seeFloor.jumpToSeefloorSlice(99, 1))
self.assertEqual(102, seeFloor.jumpToSeefloorSlice(100, 1))
self.assertEqual(102, seeFloor.jumpToSeefloorSlice(101, 1))
self.assertEqual(103, seeFloor.jumpToSeefloorSlice(102, 1))
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(103, 1))
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(104, 1))
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(105, 1))
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(106, 1))
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(107, 1))
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(108, 1))
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(
2222, 1)) # if parameter is out of bounds show first/last frame
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(109, 1))
self.assertEqual(93, seeFloor.jumpToSeefloorSlice(
-333, -1)) # if parameter is out of bounds show first/last frame
self.assertEqual(93, seeFloor.jumpToSeefloorSlice(
91, -1)) #<-- out-of-bound frame
self.assertEqual(93, seeFloor.jumpToSeefloorSlice(
92, -1)) #<-- out-of-bound frame
self.assertEqual(93, seeFloor.jumpToSeefloorSlice(
93, -1)) #<-- 93 is bad frame - its FIRST frame
self.assertEqual(93, seeFloor.jumpToSeefloorSlice(
94, -1)) #<-- 94 is bad frame
self.assertEqual(93, seeFloor.jumpToSeefloorSlice(
95, -1)) #<-- 95 is bad frame
self.assertEqual(93, seeFloor.jumpToSeefloorSlice(96, -1))
self.assertEqual(96, seeFloor.jumpToSeefloorSlice(97, -1))
self.assertEqual(96, seeFloor.jumpToSeefloorSlice(98, -1))
self.assertEqual(98, seeFloor.jumpToSeefloorSlice(
99, -1)) #<-- 99 is bad frame
self.assertEqual(98, seeFloor.jumpToSeefloorSlice(
100, -1)) #<-- 100 is bad frame
self.assertEqual(98, seeFloor.jumpToSeefloorSlice(
101, -1)) #<-- 101 is bad frame
self.assertEqual(98, seeFloor.jumpToSeefloorSlice(102, -1))
self.assertEqual(102, seeFloor.jumpToSeefloorSlice(103, -1))
self.assertEqual(103, seeFloor.jumpToSeefloorSlice(
104, -1)) #<-- 104 is bad frame
self.assertEqual(103, seeFloor.jumpToSeefloorSlice(
105, -1)) #<-- 105 is bad frame
self.assertEqual(103, seeFloor.jumpToSeefloorSlice(
106, -1)) #<-- 106 is bad frame
self.assertEqual(103, seeFloor.jumpToSeefloorSlice(
107, -1)) #<-- 107 is bad frame - its LAST frame
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(
108, -1)) #<-- out-of-bound frame
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(
2222, -1)) #<-- out-of-bound frame
self.assertEqual(107, seeFloor.jumpToSeefloorSlice(
109, -1)) #<-- out-of-bound frame
def test_jumpToSeefloorSlice_multiSlice_goingDownward(self):
# Setup
pixels_in_frame = Frame.FRAME_HEIGHT
pixels_in_half_frame = int(pixels_in_frame / 2)
drifts_df = pd.DataFrame()
drifts_df = self.__append_to_drifts_df(drifts_df, 100, 0, 0)
drifts_df = self.__append_to_drifts_df(drifts_df, 200, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 300, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 400, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 500, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 600, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 700, 0,
pixels_in_half_frame)
driftData = DriftData(drifts_df)
badframes_df = pd.DataFrame()
badframes_df = self.__append_to_badframes_df(badframes_df, 90, 149)
badframes_df = self.__append_to_badframes_df(badframes_df, 575, 624)
badframes_df = self.__append_to_badframes_df(badframes_df, 690, 790)
badframesData = BadFramesData.createFromDataFrame(None, badframes_df)
#--- good frames are 150-574 and 625-689. startFrame is 100, endFrame is 700
seeFloor = SeeFloor(driftData, badframesData, None, None)
# Exercise
# Assert
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(
10, -1)) # if parameter is out of bounds show first/last frame
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(99, -1))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(100, -1))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(101, -1))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(149, -1))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(150, -1))
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(151, -1))
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(175, -1))
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(348, -1))
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(349, -1))
self.assertEqual(151, seeFloor.jumpToSeefloorSlice(350, -1))
self.assertEqual(152, seeFloor.jumpToSeefloorSlice(351, -1))
self.assertEqual(374, seeFloor.jumpToSeefloorSlice(573, -1))
self.assertEqual(375, seeFloor.jumpToSeefloorSlice(574, -1)) #<--- ??
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(575, -1))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(576, -1))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(623, -1))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(624, -1))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(625, -1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(626, -1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(627, -1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(687, -1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(688, -1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(689, -1))
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(690, -1))
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(691, -1))
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(699, -1))
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(700, -1))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(701, -1))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(702, -1))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(
10, -2)) # if parameter is out of bounds show first/last frame
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(99, -2))
# step 1 is to jump over bad block, step 2 is to jump 200 frames
self.assertEqual(375, seeFloor.jumpToSeefloorSlice(600, -2))
self.assertEqual(375, seeFloor.jumpToSeefloorSlice(575, -2))
#TODO: why 176 and not 175? where did extra 1 come from
self.assertEqual(176, seeFloor.jumpToSeefloorSlice(
574, -2)) #<--- why 176 and not 175? where did extra 1 come from
self.assertEqual(175, seeFloor.jumpToSeefloorSlice(573, -2))
#TODO:fix test cases below
# normal 2 jumps without any bad blocks in the middle
self.assertEqual(152, seeFloor.jumpToSeefloorSlice(550, -2))
self.assertEqual(151, seeFloor.jumpToSeefloorSlice(549, -2))
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(548, -2))
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(547, -2))
self.assertEqual(
150, seeFloor.jumpToSeefloorSlice(546, -2)
) #<-- ?? why diff input but same output. Who is rounding where?
self.assertEqual(
150, seeFloor.jumpToSeefloorSlice(545, -2)
) #<-- ?? why diff input but same output. Who is rounding where?
self.assertEqual(
150, seeFloor.jumpToSeefloorSlice(351, -2)
) #<-- ?? why diff input but same output. Who is rounding where?
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(350, -2))
self.assertEqual(
100, seeFloor.jumpToSeefloorSlice(349, -2)
) #<-- ?? why diff input but same output. Who is rounding where?
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(348, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(348, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(152, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(151, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(150, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(149, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(148, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(147, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(103, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(102, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(101, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(100, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(99, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(98, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(92, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(91, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(90, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(89, -2))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(88, -2))
# jump #1 is 200 frames, then second jump is shorter to the last good frame before bad block
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(700, -1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(700, -2))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(700, -3))
self.assertEqual(375, seeFloor.jumpToSeefloorSlice(700, -4))
self.assertEqual(176, seeFloor.jumpToSeefloorSlice(
700, -5)) #<-- ?? why not 175?
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(700, -6))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(700, -7))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(700, -8))
self.assertEqual(176, seeFloor.jumpToSeefloorSlice(699, -5))
self.assertEqual(176, seeFloor.jumpToSeefloorSlice(698, -5))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(701, -1))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(701, -2))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(701, -3))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(702, -3))
def test_jumpToSeefloorSlice_multiSlice_goingUpward(self):
# Setup
pixels_in_frame = Frame.FRAME_HEIGHT
pixels_in_half_frame = int(pixels_in_frame / 2)
drifts_df = pd.DataFrame()
drifts_df = self.__append_to_drifts_df(drifts_df, 100, 0, 0)
drifts_df = self.__append_to_drifts_df(drifts_df, 200, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 300, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 400, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 500, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 600, 0,
pixels_in_half_frame)
drifts_df = self.__append_to_drifts_df(drifts_df, 700, 0,
pixels_in_half_frame)
driftData = DriftData(drifts_df)
badframes_df = pd.DataFrame()
badframes_df = self.__append_to_badframes_df(badframes_df, 90, 149)
badframes_df = self.__append_to_badframes_df(badframes_df, 575, 624)
badframes_df = self.__append_to_badframes_df(badframes_df, 690, 790)
badframesData = BadFramesData.createFromDataFrame(None, badframes_df)
#--- good frames are 150-574 and 625-689. startFrame is 100, endFrame is 700
seeFloor = SeeFloor(driftData, badframesData, None, None)
# Exercise
# Assert
self.assertEqual(510, seeFloor.jumpToSeefloorSlice(500, 0.05))
self.assertEqual(560, seeFloor.jumpToSeefloorSlice(500, 0.30))
self.assertEqual(561, seeFloor.jumpToSeefloorSlice(500, 0.305))
self.assertEqual(563, seeFloor.jumpToSeefloorSlice(500, 0.31))
self.assertEqual(565, seeFloor.jumpToSeefloorSlice(500, 0.32))
self.assertEqual(567, seeFloor.jumpToSeefloorSlice(500, 0.33))
self.assertEqual(569, seeFloor.jumpToSeefloorSlice(500, 0.34))
self.assertEqual(571, seeFloor.jumpToSeefloorSlice(500, 0.35))
self.assertEqual(573, seeFloor.jumpToSeefloorSlice(500, 0.36))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(500, 0.37))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(500, 0.38)) #??
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(500, 0.39)) #??
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(500, 1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(500, 1.1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(500, 1.36)) #??
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(500, 1.39)) #??
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(500, 1.34)) #??
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(500, 2)) #??
self.assertEqual(646, seeFloor.jumpToSeefloorSlice(500, 2.1)) #??
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(
10, 1)) # if parameter is out of bounds show first/last frame
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(99, 1))
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(100, 1))
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(101, 1))
self.assertEqual(150, seeFloor.jumpToSeefloorSlice(149, 1))
self.assertEqual(350, seeFloor.jumpToSeefloorSlice(150, 1))
self.assertEqual(352, seeFloor.jumpToSeefloorSlice(151, 1)) #<>>>
self.assertEqual(353, seeFloor.jumpToSeefloorSlice(152, 1)) #<>>>
self.assertEqual(375, seeFloor.jumpToSeefloorSlice(175, 1))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(572, 1))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(573, 1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(574, 1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(575, 1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(623, 1))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(624, 1))
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(625, 1))
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(626, 1))
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(627, 1))
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(687, 1))
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(688, 1))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(689, 1))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(690, 1))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(691, 1))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(699, 1))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(700, 1))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(701, 1))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(702, 1))
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(
10, 2)) # if parameter is out of bounds show first/last frame
self.assertEqual(100, seeFloor.jumpToSeefloorSlice(99, 2))
# step 1 is to jump over bad block, step 2 is to jump 200 frames
self.assertEqual(350, seeFloor.jumpToSeefloorSlice(100, 2))
self.assertEqual(350, seeFloor.jumpToSeefloorSlice(101, 2))
self.assertEqual(350, seeFloor.jumpToSeefloorSlice(149, 2))
# normal 2 jumps without any bad blocks in the middle
self.assertEqual(550, seeFloor.jumpToSeefloorSlice(150, 2))
self.assertEqual(553, seeFloor.jumpToSeefloorSlice(151, 2))
self.assertEqual(554, seeFloor.jumpToSeefloorSlice(152, 2))
self.assertEqual(555, seeFloor.jumpToSeefloorSlice(153, 2))
self.assertEqual(555, seeFloor.jumpToSeefloorSlice(
154,
2)) #<-- ?? why diff input but same output. Who is rounding where?
self.assertEqual(555, seeFloor.jumpToSeefloorSlice(
155,
2)) #<-- ?? why diff input but same output. Who is rounding where?
self.assertEqual(558, seeFloor.jumpToSeefloorSlice(156, 2))
self.assertEqual(559, seeFloor.jumpToSeefloorSlice(157, 2))
self.assertEqual(560, seeFloor.jumpToSeefloorSlice(158, 2))
self.assertEqual(560, seeFloor.jumpToSeefloorSlice(
159,
2)) #<-- ?? why diff input but same output. Who is rounding where?
self.assertEqual(560, seeFloor.jumpToSeefloorSlice(
160,
2)) #<-- ?? why diff input but same output. Who is rounding where?
# jump #1 is 200 frames, then second jump is shorter to the last good frame before bad block
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(172, 2))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(173, 2))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(174, 2)) #<-- ??
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(175, 2)) #<-- ??
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(176, 2))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(177, 2))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(178, 2))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(179, 2))
self.assertEqual(574, seeFloor.jumpToSeefloorSlice(180, 2))
self.assertEqual(625, seeFloor.jumpToSeefloorSlice(180, 3))
self.assertEqual(689, seeFloor.jumpToSeefloorSlice(180, 4))
self.assertEqual(700, seeFloor.jumpToSeefloorSlice(180, 5))