def process_nmap_data(nmap_report, workspace, target=None):
workspace_mode = lib.db.get_workspace_mode(workspace)[0][0]
services_file = open('/etc/services', mode='r')
services_file_data = services_file.readlines()
services_file.close()
#This top part of the for loop determines whether or not to add the host
for scanned_host in nmap_report.hosts:
ip = scanned_host.id
unique_db_ips = lib.db.is_vhost_in_db(
ip, workspace) #Returns data if IP is in database
#print(unique_db_ips)
vhosts = scanned_host.hostnames
print("process_nmap_data: " + str(vhosts))
for vhost in vhosts:
print("process_nmap_data: " + vhost)
vhost_explicitly_out_of_scope = lib.db.is_vhost_explicitly_out_of_scope(
vhost, workspace)
if not vhost_explicitly_out_of_scope: # if the vhost is not explicitly out of scope, add it to db
is_vhost_in_db = lib.db.is_vhost_in_db(
vhost, workspace) # Returns data if IP is in database
if not is_vhost_in_db:
db_vhost = (ip, vhost, 1, 0, 0, workspace)
lib.db.create_vhost(db_vhost)
else:
if not lib.db.get_in_scope_ip(
ip, workspace
): # if it is in the DB but not in scope...
print(
"[+] IP is in the DB, but not in scope. Adding to scope:\t[{0}]"
.format(ip))
lib.db.update_vhosts_in_scope(
ip, vhost, workspace, 1
) # update the host to add it to scope, if it was already in scope, do nothing
else:
print(
"[!] {0} is explicitly marked as out of scope. Skipping..."
.format(ip))
if unique_db_ips: #If this IP was in the db...
vhost_explicitly_out_of_scope = lib.db.is_vhost_explicitly_out_of_scope(
ip, workspace)
if not vhost_explicitly_out_of_scope: #and if the vhost is not explicitly out of scope
if not lib.db.get_in_scope_ip(
ip, workspace): # and if it is not in scope...
print(
"[+] IP is in the DB, but not in scope. Adding to scope:\t[{0}]"
.format(ip))
lib.db.update_vhosts_in_scope(
ip, ip, workspace, 1
) # update the host to add it to scope, if it was already in scope, do nothing
# else:
# print("[+] [{0}] is already in the DB and considered in scope".format(ip))
else:
print(
"[!] {0} is explicitly marked as out of scope. Skipping..."
.format(ip))
else: #if this ip was not already in the db, create a new host and mark it as in scope
#note to self: i dont need to check to see if it is out of scope beccause i already know its not in db at all...
print("[+] IP not in DB. Adding it to DB and to scope:\t [{0}]".
format(ip))
db_vhost = (ip, ip, 1, 0, 0, workspace)
db.create_vhost(db_vhost)
#Now after the host is added, let's add the ports for that host.
for scanned_service_item in scanned_host.services:
if scanned_service_item.state == "open":
scanned_service_port = scanned_service_item.port
scanned_service_name = scanned_service_item.service
scanned_service_protocol = scanned_service_item.protocol
#print(str(scanned_service_port))
if scanned_service_item.tunnel == 'ssl':
scanned_service_name = 'https'
if scanned_service_name == "tcpwrapped":
try:
port_proto = "\t" + str(
scanned_service_port) + "/" + str(
scanned_service_protocol) + "\t"
for line in services_file_data:
if port_proto in line:
scanned_service_name = line.split("\t")[0]
except:
pass
#Not using this yet, but I'd like to do send this to searchsploit
try:
scanned_service_product = scanned_service_item.service_dict[
'product']
except:
scanned_service_product = ''
try:
scanned_service_version = scanned_service_item.service_dict[
'version']
except:
scanned_service_version = ''
try:
scanned_service_extrainfo = scanned_service_item.service_dict[
'extrainfo']
except:
scanned_service_extrainfo = ''
#print "Port: {0}\tService: {1}\tProduct & Version: {3} {4} {5}".format(scanned_service_port,scanned_service_name,scanned_service_product,scanned_service_version,scanned_service_extrainfo)
db_service = db.get_service(ip, scanned_service_port,
scanned_service_protocol,
workspace)
if not db_service:
db_string = (ip, scanned_service_port,
scanned_service_protocol,
scanned_service_name, scanned_service_product,
scanned_service_version,
scanned_service_extrainfo, workspace)
db.create_service(db_string)
else:
db.update_service(ip, scanned_service_port,
scanned_service_protocol,
scanned_service_name, workspace)
output_base_dir = lib.db.get_output_dir_for_workspace(
workspace)[0][0]
file_end_part = "/" + ip + "/celerystalkOutput/" + ip + "_" + str(
scanned_service_port
) + "_" + scanned_service_protocol + "_"
scan_output_base_file_dir = os.path.abspath(output_base_dir +
file_end_part)
if (scanned_service_name == 'https') or (scanned_service_name
== 'http'):
path = scanned_service_name + "://" + ip + ":" + str(
scanned_service_port) + "/"
db_path = db.get_path(path, workspace)
if not db_path:
url_screenshot_filename = scan_output_base_file_dir + ".png"
db_path = (ip, scanned_service_port, path, 0,
url_screenshot_filename, workspace)
db.insert_new_path(db_path)
for vhost in vhosts:
print("process_nmap_data - add service: " + vhost)
db_service = db.get_service(vhost, scanned_service_port,
scanned_service_protocol,
workspace)
if not db_service:
print("service didnt exist, adding: " + vhost +
str(scanned_service_port))
db_string = (vhost, scanned_service_port,
scanned_service_protocol,
scanned_service_name,
scanned_service_product,
scanned_service_version,
scanned_service_extrainfo, workspace)
db.create_service(db_string)
else:
print("service does exist, updating: " + vhost +
str(scanned_service_port))
db.update_service(vhost, scanned_service_port,
scanned_service_protocol,
scanned_service_name, workspace)
if ip == vhost:
scan_output_base_file_dir = os.path.abspath(
output_base_dir + "/" + ip +
"/celerystalkOutput/" + ip + "_" +
str(scanned_service_port) + "_" +
scanned_service_protocol)
else:
scan_output_base_file_dir = os.path.abspath(
output_base_dir + "/" + ip +
"/celerystalkOutput/" + vhost + "_" +
str(scanned_service_port) + "_" +
scanned_service_protocol)
if (scanned_service_name
== 'https') or (scanned_service_name == 'http'):
path = scanned_service_name + "://" + vhost + ":" + str(
scanned_service_port) + "/"
db_path = db.get_path(path, workspace)
if not db_path:
url_screenshot_filename = scan_output_base_file_dir + ".png"
db_path = (vhost, scanned_service_port, path, 0,
url_screenshot_filename, workspace)
db.insert_new_path(db_path)
def import_url(url, workspace, output_base_dir):
celery_path = sys.path[0]
#config, supported_services = config_parser.read_config_ini()
#task_id_list = []
urls_to_screenshot = []
try:
parsed_url = urlparse.urlparse(url)
scheme = parsed_url[0]
if not scheme:
print(
"\n[!] URL parameter (-u) requires that you specify the scheme (http:// or https://)\n"
)
exit()
if ":" in parsed_url[1]:
vhost, port = parsed_url[1].split(':')
else:
vhost = parsed_url[1]
if scheme == "http":
port = 80
elif scheme == "https":
port = 443
path = parsed_url[2]
except:
if not scheme:
exit()
in_scope, ip = lib.utils.domain_scope_checker(vhost, workspace)
proto = "tcp"
vhost_explicitly_out_of_scope = lib.db.is_vhost_explicitly_out_of_scope(
vhost, workspace)
if not vhost_explicitly_out_of_scope: # and if the vhost is not explicitly out of scope
if in_scope == 0:
answer = raw_input(
"[+] {0} is not in scope. Would you like to to add {1}/{0} to the list of in scope hosts?"
.format(vhost, ip))
if (answer == "Y") or (answer == "y") or (answer == ""):
in_scope = 1
if in_scope == 1:
is_vhost_in_db = lib.db.is_vhost_in_db(vhost, workspace)
if not is_vhost_in_db:
lib.db.update_vhosts_in_scope(ip, vhost, workspace, 1)
lib.db.update_vhosts_submitted(ip, vhost, workspace, 1)
else:
db_vhost = (ip, vhost, 1, 0, 1, workspace
) # add it to the vhosts db and mark as in scope
lib.db.create_vhost(db_vhost)
if ip == vhost:
scan_output_base_file_dir = output_base_dir + "/" + ip + "/celerystalkOutput/" + ip + "_" + str(
port) + "_" + proto + "_"
else:
scan_output_base_file_dir = output_base_dir + "/" + ip + "/celerystalkOutput/" + vhost + "_" + str(
port) + "_" + proto + "_"
host_dir = output_base_dir + "/" + ip
host_data_dir = host_dir + "/celerystalkOutput/"
# Creates something like /pentest/10.0.0.1, /pentest/10.0.0.2, etc.
lib.utils.create_dir_structure(ip, host_dir)
# Next two lines create the file that will contain each command that was executed. This is not the audit log,
# but a log of commands that can easily be copy/pasted if you need to run them again.
summary_file_name = host_data_dir + "ScanSummary.log"
summary_file = open(summary_file_name, 'a')
# db_vhost = (ip, vhost, 1,0,1, workspace) # in this mode all vhosts are in scope
# # print(db_vhost)
# db.create_vhost(db_vhost)
# Insert port/service combo into services table if it doesnt exist
db_service = db.get_service(ip, port, proto, workspace)
if not db_service:
#db_string = (ip, port, proto, scheme,'','','',workspace)
db_string = (vhost, port, proto, scheme, '', '', '', workspace)
db.create_service(db_string)
# Insert url into paths table and take screenshot
db_path = db.get_path(path, workspace)
if not db_path:
url_screenshot_filename = scan_output_base_file_dir + url.replace("http", "").replace("https", "") \
.replace("/", "_") \
.replace("\\", "") \
.replace(":", "_") + ".png"
url_screenshot_filename = url_screenshot_filename.replace(
"__", "")
db_path = (vhost, port, url, 0, url_screenshot_filename,
workspace)
db.insert_new_path(db_path)
# print("Found Url: " + str(url))
#urls_to_screenshot.append((url, url_screenshot_filename))
#lib.utils.take_screenshot(urls_to_screenshot)
# print(result)
db_path = (vhost, port, url, 0, url_screenshot_filename, workspace)
lib.db.insert_new_path(db_path)
else:
print(
"[!] {0} is explicitly marked as out of scope. Skipping...".format(
vhost))
def process_url(url, output_base_dir, workspace, simulation):
celery_path = sys.path[0]
config, supported_services = config_parser.read_config_ini()
task_id_list = []
try:
parsed_url = urlparse.urlparse(url)
scheme = parsed_url[0]
if not scheme:
print(
"\n[!] URL parameter (-u) requires that you specify the scheme (http:// or https://)\n"
)
exit()
if ":" in parsed_url[1]:
target, port = parsed_url[1].split(':')
else:
target = parsed_url[1]
if scheme == "http":
port = 80
elif scheme == "https":
port = 443
path = parsed_url[2]
except:
if not scheme:
exit()
try:
ip = socket.gethostbyname(target)
except:
print("Error getting IP")
proto = "tcp"
if ip == target:
scan_output_base_file_dir = output_base_dir + "/" + ip + "/celerystalkOutput/" + ip + "_" + str(
port) + "_" + proto + "_"
else:
scan_output_base_file_dir = output_base_dir + "/" + ip + "/celerystalkOutput/" + target + "_" + str(
port) + "_" + proto + "_"
host_dir = output_base_dir + "/" + ip
host_data_dir = host_dir + "/celerystalkOutput/"
# Creates something like /pentest/10.0.0.1, /pentest/10.0.0.2, etc.
utils.create_dir_structure(ip, host_dir)
# Next two lines create the file that will contain each command that was executed. This is not the audit log,
# but a log of commands that can easily be copy/pasted if you need to run them again.
summary_file_name = host_data_dir + "ScanSummary.log"
summary_file = open(summary_file_name, 'a')
db_vhost = (ip, target, 1, 1, workspace
) # in this mode all vhosts are in scope
#print(db_vhost)
db.create_vhost(db_vhost)
#Insert port/service combo into services table
db_service = db.get_service(ip, port, proto, workspace)
if not db_service:
db_string = (ip, port, proto, scheme, workspace)
db.create_service(db_string)
# Insert url into paths table and take screenshot
db_path = db.get_path(path, workspace)
if not db_path:
url_screenshot_filename = scan_output_base_file_dir + url.replace("http", "").replace("https", "") \
.replace("/", "_") \
.replace("\\", "") \
.replace(":", "_") + ".png"
url_screenshot_filename = url_screenshot_filename.replace("__", "")
db_path = (ip, port, url, 0, url_screenshot_filename, workspace)
db.insert_new_path(db_path)
#print("Found Url: " + str(url))
result = utils.take_screenshot(url, url_screenshot_filename)
#print(result)
#TODO: This def might introduce a bug - same code as parse config submit jobs to celery. need to just call that function here
for section in config.sections():
if (section == "http") or (section == "https"):
if section == scheme:
for (cmd_name, cmd) in config.items(section):
outfile = scan_output_base_file_dir + cmd_name
populated_command = cmd.replace(
"[TARGET]",
target).replace("[PORT]", str(port)).replace(
"[OUTPUT]", outfile).replace("[PATH]", path)
if simulation:
# debug - sends jobs to celery, but with a # in front of every one.
populated_command = "#" + populated_command
# Grab a UUID from celery.utils so that i can assign it to my task at init, which is amazing because
# that allows me to pass it to all of the tasks in the chain.
task_id = uuid()
result = chain(
# insert a row into the database to mark the task as submitted. a subtask does not get tracked
# in celery the same way a task does, for instance, you can't find it in flower
tasks.cel_create_task.subtask(
args=(cmd_name, populated_command, target,
outfile + ".txt", workspace, task_id)),
# run the command. run_task takes care of marking the task as started and then completed.
# The si tells run_cmd to ignore the data returned from a previous task
tasks.run_cmd.si(cmd_name, populated_command,
celery_path,
task_id).set(task_id=task_id),
# right now, every executed command gets sent to a generic post_process task that can do
# additinoal stuff based on the command that just ran.
tasks.post_process.si(cmd_name, populated_command,
output_base_dir, workspace,
target, host_dir, simulation,
port, scheme, proto,
celery_path),
)() # .apply_async()
task_id_list.append(result.task_id)
host_audit_log = host_dir + "/" + "{0}_executed_commands.txt".format(
ip)
f = open(host_audit_log, 'a')
f.write(populated_command + "\n\n")
f.close()
print("[+] Submitted {0} tasks to queue.\n".format(len(task_id_list)))