Ejemplo n.º 1
0
def test_PIM_hello_tx_rx_p1(request):
    """
    TC_54 Verify received and transmit hello stats
        are getting cleared after PIM nbr reset
    """

    tgen = get_topogen()
    tc_name = request.node.name
    write_test_header(tc_name)

    # Creating configuration from JSON
    kill_iperf(tgen)
    clear_ip_mroute(tgen)
    reset_config_on_routers(tgen)
    clear_ip_pim_interface_traffic(tgen, topo)

    # Don"t run this test if we have any failure.
    if tgen.routers_have_failure():
        pytest.skip(tgen.errors)
    step(
        "Remove c1-c2 connected link to simulate topo "
        "c1(LHR)---l1(RP)----r2---f1-----c2(FHR)"
    )

    intf_c1_c2 = topo["routers"]["c1"]["links"]["c2"]["interface"]
    intf_c2_c1 = topo["routers"]["c2"]["links"]["c1"]["interface"]
    shutdown_bringup_interface(tgen, "c1", intf_c1_c2, False)
    shutdown_bringup_interface(tgen, "c2", intf_c2_c1, False)

    step("Enable the PIM on all the interfaces of FRR1, FRR2, FRR3")
    step(
        "Enable IGMP of FRR1 interface and send IGMP joins "
        " from FRR1 node for group range (225.1.1.1-5)"
    )

    intf_c1_i4 = topo["routers"]["c1"]["links"]["i4"]["interface"]
    input_dict = {
        "c1": {"igmp": {"interfaces": {intf_c1_i4: {"igmp": {"version": "2"}}}}}
    }
    result = create_igmp_config(tgen, topo, input_dict)
    assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

    input_join = {"i4": topo["routers"]["i4"]["links"]["c1"]["interface"]}

    for recvr, recvr_intf in input_join.items():
        result = config_to_send_igmp_join_and_traffic(
            tgen, topo, tc_name, recvr, recvr_intf, GROUP_RANGE_1, join=True
        )
        assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

        result = iperfSendIGMPJoin(tgen, recvr, IGMP_JOIN_RANGE_1, join_interval=1)
        assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

    step("Configure static RP for (225.1.1.1-5) as R2")

    input_dict = {
        "l1": {
            "pim": {
                "rp": [
                    {
                        "rp_addr": topo["routers"]["l1"]["links"]["lo"]["ipv4"].split(
                            "/"
                        )[0],
                        "group_addr_range": GROUP_RANGE,
                    }
                ]
            }
        }
    }

    result = create_pim_config(tgen, topo, input_dict)
    assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    step("Send Mcast traffic from C2 to all the groups ( 225.1.1.1 to 225.1.1.5)")

    input_src = {"i5": topo["routers"]["i5"]["links"]["c2"]["interface"]}

    for src, src_intf in input_src.items():
        result = config_to_send_igmp_join_and_traffic(
            tgen, topo, tc_name, src, src_intf, GROUP_RANGE_1, traffic=True
        )
        assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

        result = iperfSendTraffic(tgen, src, IGMP_JOIN_RANGE_1, 32, 2500)
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    source_i5 = topo["routers"]["i5"]["links"]["c2"]["ipv4"].split("/")[0]

    input_dict_starg = [
        {
            "dut": "c1",
            "src_address": "*",
            "iif": topo["routers"]["c1"]["links"]["l1"]["interface"],
            "oil": topo["routers"]["c1"]["links"]["i4"]["interface"],
        }
    ]

    input_dict_sg = [
        {
            "dut": "c1",
            "src_address": source_i5,
            "iif": topo["routers"]["c1"]["links"]["l1"]["interface"],
            "oil": topo["routers"]["c1"]["links"]["i4"]["interface"],
        }
    ]

    step("(*,G) and (S,G) created on f1 and node verify using 'show ip mroute'")
    for data in input_dict_sg:
        result = verify_ip_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            data["iif"],
            data["oil"],
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    for data in input_dict_starg:
        result = verify_ip_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            data["iif"],
            data["oil"],
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    intf_l1_c1 = topo["routers"]["l1"]["links"]["c1"]["interface"]
    intf_c1_l1 = topo["routers"]["c1"]["links"]["l1"]["interface"]

    step("verify before stats on C1")
    state_dict = {"c1": {intf_c1_l1: ["helloTx", "helloRx"],}}

    c1_state_before = verify_pim_interface_traffic(tgen, state_dict)
    assert isinstance(
        c1_state_before, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("Flap PIM nbr while doing interface c1-l1 interface shut from f1 side")
    shutdown_bringup_interface(tgen, "c1", intf_c1_l1, False)

    step(
        "After shut of local interface from c1 , verify rx/tx hello counters are cleared on c1 side"
        "verify using 'show ip pim interface traffic'"
    )
    shutdown_bringup_interface(tgen, "c1", intf_c1_l1, True)

    step("verify stats after on c1")
    c1_state_after = verify_pim_interface_traffic(tgen, state_dict)
    assert isinstance(
        c1_state_after, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("verify stats not increamented on c1")
    result = verify_state_incremented(c1_state_before, c1_state_after)
    assert (
        result is not True
    ), "Testcase{} : Failed Error: {}" "stats incremented".format(tc_name, result)

    step("verify before stats on l1")
    l1_state_dict = {"l1": {intf_l1_c1: ["helloTx", "helloRx"],}}

    l1_state_before = verify_pim_interface_traffic(tgen, l1_state_dict)
    assert isinstance(
        l1_state_before, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("Flap PIM nbr while doing interface r2-c1 shut from r2 side")
    shutdown_bringup_interface(tgen, "l1", intf_l1_c1, False)

    step(
        "After shut the interface from r2 side , verify r2 side rx and tx of hello"
        "counters are resetted show ip pim interface traffic"
    )
    shutdown_bringup_interface(tgen, "l1", intf_l1_c1, True)

    step("verify stats after on l1")
    l1_state_after = verify_pim_interface_traffic(tgen, l1_state_dict)
    assert isinstance(
        l1_state_after, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("verify stats not increamented on l1")
    result = verify_state_incremented(l1_state_before, l1_state_after)
    assert (
        result is not True
    ), "Testcase{} : Failed Error: {}" "stats incremented".format(tc_name, result)

    step("Reinit the dict")
    c1_state_before = {}
    l1_state_before = {}
    c1_state_after = {}
    l1_state_after = {}

    step("verify before stats on C1")
    state_dict = {"c1": {intf_c1_l1: ["helloTx", "helloRx"],}}

    c1_state_before = verify_pim_interface_traffic(tgen, state_dict)
    assert isinstance(
        c1_state_before, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("Flap c1-r2 pim nbr while changing ip address from c1 side")
    c1_l1_ip_subnet = topo["routers"]["c1"]["links"]["l1"]["ipv4"]

    raw_config = {
        "c1": {
            "raw_config": [
                "interface {}".format(intf_c1_l1),
                "no ip address {}".format(c1_l1_ip_subnet),
                "ip address {}".format(NEW_ADDRESS_2_SUBNET),
            ]
        }
    }

    result = apply_raw_config(tgen, raw_config)
    assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    step("verify stats after on c1")
    c1_state_after = verify_pim_interface_traffic(tgen, state_dict)
    assert isinstance(
        c1_state_after, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("verify stats not increamented on c1")
    result = verify_state_incremented(c1_state_before, c1_state_after)
    assert (
        result is not True
    ), "Testcase{} : Failed Error: {}" "stats incremented".format(tc_name, result)

    write_test_footer(tc_name)
Ejemplo n.º 2
0
def test_mroute_with_RP_default_route_all_nodes_p2(request):
    """
    TC_50 Verify mroute when LHR,FHR,RP and transit routers reachable
    using default routes
    """

    tgen = get_topogen()
    tc_name = request.node.name
    write_test_header(tc_name)

    # Creating configuration from JSON
    kill_iperf(tgen)
    clear_ip_mroute(tgen)
    reset_config_on_routers(tgen)
    clear_ip_pim_interface_traffic(tgen, topo)

    # Don"t run this test if we have any failure.
    if tgen.routers_have_failure():
        pytest.skip(tgen.errors)
    step(
        "Remove c1-c2 connected link to simulate topo "
        "c1(LHR)---l1(RP)----r2---f1-----c2(FHR)"
    )

    intf_c1_c2 = topo["routers"]["c1"]["links"]["c2"]["interface"]
    intf_c2_c1 = topo["routers"]["c2"]["links"]["c1"]["interface"]
    shutdown_bringup_interface(tgen, "c1", intf_c1_c2, False)
    shutdown_bringup_interface(tgen, "c2", intf_c2_c1, False)

    step("Enable the PIM on all the interfaces of FRR1, FRR2, FRR3")
    step(
        "Enable IGMP of FRR1 interface and send IGMP joins "
        " from FRR1 node for group range (225.1.1.1-5)"
    )

    intf_c1_i4 = topo["routers"]["c1"]["links"]["i4"]["interface"]
    input_dict = {
        "c1": {"igmp": {"interfaces": {intf_c1_i4: {"igmp": {"version": "2"}}}}}
    }
    result = create_igmp_config(tgen, topo, input_dict)
    assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

    input_join = {"i4": topo["routers"]["i4"]["links"]["c1"]["interface"]}

    for recvr, recvr_intf in input_join.items():
        result = config_to_send_igmp_join_and_traffic(
            tgen, topo, tc_name, recvr, recvr_intf, GROUP_RANGE_1, join=True
        )
        assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

        result = iperfSendIGMPJoin(tgen, recvr, IGMP_JOIN_RANGE_1, join_interval=1)
        assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

    step("Configure static RP for (225.1.1.1-5) as R2")

    input_dict = {
        "l1": {
            "pim": {
                "rp": [
                    {
                        "rp_addr": topo["routers"]["l1"]["links"]["lo"]["ipv4"].split(
                            "/"
                        )[0],
                        "group_addr_range": GROUP_RANGE,
                    }
                ]
            }
        }
    }

    result = create_pim_config(tgen, topo, input_dict)
    assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    step("Send traffic from C2 to all the groups ( 225.1.1.1 to 225.1.1.5)")

    input_src = {"i5": topo["routers"]["i5"]["links"]["c2"]["interface"]}

    for src, src_intf in input_src.items():
        result = config_to_send_igmp_join_and_traffic(
            tgen, topo, tc_name, src, src_intf, GROUP_RANGE_1, traffic=True
        )
        assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

        result = iperfSendTraffic(tgen, src, IGMP_JOIN_RANGE_1, 32, 2500)
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    source_i5 = topo["routers"]["i5"]["links"]["c2"]["ipv4"].split("/")[0]

    input_dict_starg = [
        {
            "dut": "c1",
            "src_address": "*",
            "iif": topo["routers"]["c1"]["links"]["l1"]["interface"],
            "oil": topo["routers"]["c1"]["links"]["i4"]["interface"],
        }
    ]

    input_dict_sg = [
        {
            "dut": "c1",
            "src_address": source_i5,
            "iif": topo["routers"]["c1"]["links"]["l1"]["interface"],
            "oil": topo["routers"]["c1"]["links"]["i4"]["interface"],
        }
    ]

    step("Verify mroutes and iff upstream")

    for data in input_dict_sg:
        result = verify_ip_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            data["iif"],
            data["oil"],
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

        result = verify_upstream_iif(
            tgen, data["dut"], data["iif"], data["src_address"], IGMP_JOIN_RANGE_1
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    for data in input_dict_starg:
        result = verify_ip_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            data["iif"],
            data["oil"],
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

        result = verify_upstream_iif(
            tgen, data["dut"], data["iif"], data["src_address"], IGMP_JOIN_RANGE_1
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    step("Delete static routes RP on all the nodes")
    input_dict = {
        "c2": {
            "static_routes": [
                {"network": ["1.0.4.11/32"], "next_hop": "10.0.3.2", "delete": True}
            ]
        },
        "c1": {
            "static_routes": [
                {"network": ["1.0.4.11/32"], "next_hop": "10.0.2.2", "delete": True}
            ]
        },
        "r2": {
            "static_routes": [
                {"network": ["1.0.4.11/32"], "next_hop": "10.0.12.1", "delete": True}
            ]
        },
        "f1": {
            "static_routes": [
                {"network": ["1.0.4.11/32"], "next_hop": "10.0.7.2", "delete": True}
            ]
        },
    }

    result = create_static_routes(tgen, input_dict)
    assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)

    step("Verify RP info unknown after removing static route from c2 ")
    dut = "c2"
    rp_address = topo["routers"]["l1"]["links"]["lo"]["ipv4"].split("/")[0]
    SOURCE = "Static"
    result = verify_pim_rp_info(
        tgen, topo, dut, GROUP_RANGE_1, "Unknown", rp_address, SOURCE
    )
    assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)

    for data in input_dict_starg:
        result = verify_ip_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            data["iif"],
            data["oil"],
            expected=False,
        )
        assert result is not True, "Testcase {} : Failed Error: {}".format(
            tc_name, result
        )

        result = verify_upstream_iif(
            tgen,
            data["dut"],
            data["iif"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            expected=False,
        )
        assert result is not True, "Testcase {} : Failed Error: {}".format(
            tc_name, result
        )

    step("Configure default routes on all the nodes")

    intf_f1_c2 = topo["routers"]["f1"]["links"]["c2"]["ipv4"].split("/")[0]
    intf_l1_c1 = topo["routers"]["l1"]["links"]["c1"]["ipv4"].split("/")[0]
    intf_l1_r2 = topo["routers"]["l1"]["links"]["r2"]["ipv4"].split("/")[0]
    intf_r2_f1 = topo["routers"]["r2"]["links"]["f1"]["ipv4"].split("/")[0]

    input_dict = {
        "c1": {"static_routes": [{"network": "0.0.0.0/0", "next_hop": intf_l1_c1}]},
        "c2": {"static_routes": [{"network": "0.0.0.0/0", "next_hop": intf_f1_c2}]},
        "r2": {"static_routes": [{"network": "0.0.0.0/0", "next_hop": intf_l1_r2}]},
        "f1": {"static_routes": [{"network": "0.0.0.0/0", "next_hop": intf_r2_f1}]},
    }
    result = create_static_routes(tgen, input_dict)
    assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)

    step("applying ip nht config  on c2")

    raw_config = {
        "c1": {"raw_config": ["ip nht resolve-via-default"]},
        "c2": {"raw_config": ["ip nht resolve-via-default"]},
        "r2": {"raw_config": ["ip nht resolve-via-default"]},
        "f1": {"raw_config": ["ip nht resolve-via-default"]},
        "l1": {"raw_config": ["ip nht resolve-via-default"]},
    }

    result = apply_raw_config(tgen, raw_config)
    assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    step("Verify RP info Not unknown after removing static route from c2 ")
    dut = "c2"
    step("Verify RP info is NOT unknown after removing static route from c2 ")
    result = verify_pim_rp_info(
        tgen, topo, dut, GROUP_RANGE_1, "Unknown", rp_address, SOURCE, expected=False
    )
    assert result is not True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result
    )

    step("Verify (s,g) populated after adding default route ")

    for data in input_dict_sg:
        result = verify_ip_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            data["iif"],
            data["oil"],
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

        result = verify_upstream_iif(
            tgen, data["dut"], data["iif"], data["src_address"], IGMP_JOIN_RANGE_1
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    step("Verify (*,g) populated after adding default route ")

    for data in input_dict_starg:
        result = verify_ip_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            data["iif"],
            data["oil"],
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

        result = verify_upstream_iif(
            tgen, data["dut"], data["iif"], data["src_address"], IGMP_JOIN_RANGE_1
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    write_test_footer(tc_name)
def pre_config_for_source_dr_tests(tgen, topo, tc_name, highest_priority,
                                   lowest_priority):
    """
    API to do common pre-configuration for source test cases

    parameters:
    -----------
    * `tgen`: topogen object
    * `topo`: input json data
    * `tc_name`: caller test case name
    * `highest_priority`: router which will be having highest DR priority
    * `lowest_priority`: router which will be having lowest DR priority
    """

    global intf_r1_s1, intf_r1_s1_addr, intf_r2_s1, intf_r2_s1_addr, intf_r3_s1, intf_r3_s1_addr, intf_i1_s1, intf_i1_s1_addr

    step("Configure IGMP and PIM on switch connected receiver nodes")
    step("Configure PIM on all upstream interfaces")

    step("Configure link between R1, R2 ,R3 and receiver on" " same vlan")
    step("Make sure {0} is DR initially configuring highest IP on {0} and R2 "
         "second highest, {1} is lower".format(highest_priority,
                                               lowest_priority))

    intf_r1_s1 = topo["routers"]["r1"]["links"]["s1"]["interface"]
    intf_r1_s1_addr = topo["routers"]["r1"]["links"]["s1"]["ipv4"]

    intf_r2_s1 = topo["routers"]["r2"]["links"]["s1"]["interface"]
    intf_r2_s1_addr = topo["routers"]["r2"]["links"]["s1"]["ipv4"]

    intf_r3_s1 = topo["routers"]["r3"]["links"]["s1"]["interface"]
    intf_r3_s1_addr = topo["routers"]["r3"]["links"]["s1"]["ipv4"]

    intf_i1_s1 = topo["routers"]["i1"]["links"]["s1"]["interface"]
    intf_i1_s1_addr = topo["routers"]["i1"]["links"]["s1"]["ipv4"]

    if lowest_priority == "r1":
        lowest_pr_intf = intf_r1_s1
    else:
        lowest_pr_intf = intf_r3_s1

    if highest_priority == "r1":
        highest_pr_intf = intf_r1_s1
    else:
        highest_pr_intf = intf_r3_s1

    vlan_input = {
        lowest_priority: {
            "vlan": {
                VLAN_1: [{
                    lowest_pr_intf: {
                        "ip": SAME_VLAN_IP_1["ip"],
                        "subnet": SAME_VLAN_IP_1["subnet"],
                    }
                }]
            }
        },
        "r2": {
            "vlan": {
                VLAN_1: [{
                    intf_r2_s1: {
                        "ip": SAME_VLAN_IP_2["ip"],
                        "subnet": SAME_VLAN_IP_2["subnet"],
                    }
                }]
            }
        },
        highest_priority: {
            "vlan": {
                VLAN_1: [{
                    highest_pr_intf: {
                        "ip": SAME_VLAN_IP_3["ip"],
                        "subnet": SAME_VLAN_IP_3["subnet"],
                    }
                }]
            }
        },
        "i1": {
            "vlan": {
                VLAN_1: [{
                    intf_i1_s1: {
                        "ip": SAME_VLAN_IP_4["ip"],
                        "subnet": SAME_VLAN_IP_4["subnet"],
                    }
                }]
            }
        },
    }

    add_interfaces_to_vlan(tgen, vlan_input)

    raw_config = {
        "r1": {
            "raw_config": [
                "interface {}".format(intf_r1_s1),
                "no ip address {}".format(intf_r1_s1_addr),
                "no ip pim",
            ]
        },
        "r2": {
            "raw_config": [
                "interface {}".format(intf_r2_s1),
                "no ip address {}".format(intf_r2_s1_addr),
                "no ip pim",
            ]
        },
        "r3": {
            "raw_config": [
                "interface {}".format(intf_r3_s1),
                "no ip address {}".format(intf_r3_s1_addr),
                "no ip pim",
            ]
        },
        "i1": {
            "raw_config": [
                "interface {}".format(intf_i1_s1),
                "no ip address {}".format(intf_i1_s1_addr),
            ]
        },
    }

    result = apply_raw_config(tgen, raw_config)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    step("Configure IGMP and PIM on switch connected receiver nodes , "
         "configure PIM nbr with hello timer 1")

    raw_config = {
        lowest_priority: {
            "raw_config": [
                "interface {}.{}".format(lowest_pr_intf, VLAN_1),
                "ip address {}/{}".format(SAME_VLAN_IP_1["ip"],
                                          SAME_VLAN_IP_1["cidr"]),
                "ip pim",
            ]
        },
        "r2": {
            "raw_config": [
                "interface {}.{}".format(intf_r2_s1, VLAN_1),
                "ip address {}/{}".format(SAME_VLAN_IP_2["ip"],
                                          SAME_VLAN_IP_2["cidr"]),
                "ip pim",
            ]
        },
        highest_priority: {
            "raw_config": [
                "interface {}.{}".format(highest_pr_intf, VLAN_1),
                "ip address {}/{}".format(SAME_VLAN_IP_3["ip"],
                                          SAME_VLAN_IP_3["cidr"]),
                "ip pim",
            ]
        },
        "i1": {
            "raw_config": [
                "interface {}.{}".format(intf_i1_s1, VLAN_1),
                "ip address {}/{}".format(SAME_VLAN_IP_4["ip"],
                                          SAME_VLAN_IP_4["cidr"]),
            ]
        },
    }

    result = apply_raw_config(tgen, raw_config)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    for dut, intf in zip(["r1", "r2", "r3"],
                         [intf_r1_s1, intf_r2_s1, intf_r3_s1]):
        raw_config = {
            dut: {
                "raw_config": [
                    "interface {}.{}".format(intf, VLAN_1),
                    "ip pim hello {} {}".format(HELLO_TIMER, HOLD_TIMER),
                ]
            }
        }
        result = apply_raw_config(tgen, raw_config)
        assert result is True, "Testcase {} : Failed Error: {}".format(
            tc_name, result)

    step("Configure R4 as RP on all the nodes for group range 224.0.0.0/24")

    input_dict = {
        "r4": {
            "pim": {
                "rp": [{
                    "rp_addr":
                    topo["routers"]["r4"]["links"]["lo"]["ipv4"].split("/")[0],
                    "group_addr_range":
                    GROUP_RANGE_1,
                }]
            }
        }
    }

    result = create_pim_config(tgen, topo, input_dict)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    step("Configure IGMP on R5 port and send IGMP join for groups "
         "(226.1.1.1-5)")

    intf_r5_i2 = topo["routers"]["r5"]["links"]["i2"]["interface"]
    input_dict = {
        "r5": {
            "igmp": {
                "interfaces": {
                    intf_r5_i2: {
                        "igmp": {
                            "version": "2"
                        }
                    }
                }
            }
        }
    }
    result = create_igmp_config(tgen, topo, input_dict)
    assert result is True, "Testcase {}: Failed Error: {}".format(
        tc_name, result)

    input_src = {"i2": topo["routers"]["i2"]["links"]["r5"]["interface"]}

    result = app_helper.run_join("i2", IGMP_JOIN_RANGE_1, "r5")
    assert result is True, "Testcase {}: Failed Error: {}".format(
        tc_name, result)

    step("Using static routes instead OSPF: Enable OSPF between all the nodes")

    step("Start traffic from Source node")

    vlan_intf_i1_s1 = "{}.{}".format(intf_i1_s1, VLAN_1)
    result = app_helper.run_traffic("i1",
                                    IGMP_JOIN_RANGE_1,
                                    bind_intf=vlan_intf_i1_s1)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    return True
def test_pimv6_add_delete_static_RP_p0(request):
    """
    TC_1: Verify upstream interfaces(IIF) and join state are updated
        properly after adding and deleting the static RP
    TC_2: Verify IIF and OIL in "show ip pim state" updated properly
        after adding and deleting the static RP
    TC_3: (*, G) Mroute entry are cleared when static RP gets deleted
    TC_4: Verify (*,G) prune is send towards the RP after deleting the
        static RP

    TOPOlogy used:
         r0------r1-----r2
       iperf    DUT     RP
    """

    tgen = get_topogen()
    tc_name = request.node.name
    write_test_header(tc_name)

    # Don"t run this test if we have any failure.
    if tgen.routers_have_failure():
        check_router_status(tgen)

    step("Shut link b/w R1 and R3 and R1 and R4 as per tescase topology")
    intf_r1_r3 = TOPO["routers"]["r1"]["links"]["r3"]["interface"]
    intf_r1_r4 = TOPO["routers"]["r1"]["links"]["r4"]["interface"]
    for intf in [intf_r1_r3, intf_r1_r4]:
        shutdown_bringup_interface(tgen, "r1", intf, ifaceaction=False)

    step("Enable PIM between r1 and r2")
    step("Enable MLD on r1 interface and send IGMP " "join (FF08::1) to r1")
    step("Configure r2 loopback interface as RP")
    input_dict = {
        "r2": {
            "pim6": {
                "rp": [{
                    "rp_addr":
                    TOPO["routers"]["r2"]["links"]["lo"]["ipv6"].split("/")[0],
                    "group_addr_range":
                    GROUP_RANGE_V6,
                }]
            }
        }
    }

    result = create_pim_config(tgen, TOPO, input_dict)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    step("Verify show ip pim interface traffic without any mld join")
    state_dict = {
        "r1": {
            TOPO["routers"]["r1"]["links"]["r2"]["interface"]: ["pruneTx"]
        }
    }

    state_before = verify_pim_interface_traffic(tgen,
                                                state_dict,
                                                addr_type="ipv6")
    assert isinstance(
        state_before, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n " "Error: {}".format(
        tc_name, result)

    step("send mld join (FF08::1) to R1")
    intf = TOPO["routers"]["r0"]["links"]["r1"]["interface"]
    intf_ip = TOPO["routers"]["r0"]["links"]["r1"]["ipv6"].split("/")[0]
    result = socat_send_igmp_join_traffic(tgen,
                                          "r0",
                                          "UDP6-RECV",
                                          IGMP_JOIN_V6,
                                          intf,
                                          intf_ip,
                                          join=True)
    assert result is True, "Testcase {}: Failed Error: {}".format(
        tc_name, result)

    step("r1: Verify RP info")
    dut = "r1"
    oif = TOPO["routers"]["r1"]["links"]["r2"]["interface"]
    iif = TOPO["routers"]["r1"]["links"]["r0"]["interface"]
    rp_address = TOPO["routers"]["r2"]["links"]["lo"]["ipv6"].split("/")[0]
    result = verify_pim_rp_info(tgen, TOPO, dut, GROUP_RANGE_V6, oif,
                                rp_address, SOURCE)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify upstream IIF interface")
    result = verify_upstream_iif(tgen, dut, oif, STAR, IGMP_JOIN_V6)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify upstream join state and join timer")
    result = verify_join_state_and_timer(tgen, dut, oif, STAR, IGMP_JOIN_V6)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify PIM state")
    result = verify_pim_state(tgen, dut, oif, iif, IGMP_JOIN_V6)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify ip mroutes")
    result = verify_mroutes(tgen, dut, STAR, IGMP_JOIN_V6, oif, iif)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Delete RP configuration")
    input_dict = {
        "r2": {
            "pim6": {
                "rp": [{
                    "rp_addr":
                    TOPO["routers"]["r2"]["links"]["lo"]["ipv6"].split("/")[0],
                    "group_addr_range":
                    GROUP_RANGE_V6,
                    "delete":
                    True,
                }]
            }
        }
    }

    result = create_pim_config(tgen, TOPO, input_dict)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    step("r1: Verify RP info")
    result = verify_pim_rp_info(tgen,
                                TOPO,
                                dut,
                                GROUP_RANGE_V6,
                                oif,
                                rp_address,
                                SOURCE,
                                expected=False)
    assert (
        result is not True
    ), "Testcase {} :Failed \n " "RP: {} info is still present \n Error: {}".format(
        tc_name, rp_address, result)

    step("r1: Verify upstream IIF interface")
    result = verify_upstream_iif(tgen,
                                 dut,
                                 oif,
                                 STAR,
                                 IGMP_JOIN_V6,
                                 expected=False)
    assert result is not True, (
        "Testcase {} :Failed \n "
        "Upstream ({}, {}) is still in join state \n Error: {}".format(
            tc_name, STAR, IGMP_JOIN_V6, result))

    step("r1: Verify upstream join state and join timer")
    result = verify_join_state_and_timer(tgen,
                                         dut,
                                         oif,
                                         STAR,
                                         IGMP_JOIN_V6,
                                         expected=False)
    assert result is not True, (
        "Testcase {} :Failed \n "
        "Upstream ({}, {}) timer is still running \n Error: {}".format(
            tc_name, STAR, IGMP_JOIN_V6, result))

    step("r1: Verify PIM state")
    result = verify_pim_state(tgen,
                              dut,
                              oif,
                              iif,
                              IGMP_JOIN_V6,
                              expected=False)
    assert result is not True, (
        "Testcase {} :Failed \n "
        "PIM state for group: {} is still Active \n Error: {}".format(
            tc_name, IGMP_JOIN_V6, result))

    step("r1: Verify ip mroutes")
    result = verify_mroutes(tgen,
                            dut,
                            STAR,
                            IGMP_JOIN_V6,
                            oif,
                            iif,
                            expected=False)
    assert result is not True, (
        "Testcase {} :Failed \n "
        "mroute ({}, {}) is still present \n Error: {}".format(
            tc_name, STAR, IGMP_JOIN_V6, result))

    step("r1: Verify show ip pim interface traffic without any IGMP join")
    state_after = verify_pim_interface_traffic(tgen,
                                               state_dict,
                                               addr_type="ipv6")
    assert isinstance(
        state_after, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n " "Error: {}".format(
        tc_name, result)

    result = verify_state_incremented(state_before, state_after)
    assert result is True, "Testcase{} : Failed Error: {}".format(
        tc_name, result)

    write_test_footer(tc_name)
Ejemplo n.º 5
0
def test_RP_configured_as_FHR_2_p2(request):
    """
    TC_22_2_P2: Verify OIF and RFP for (*,G) and (S,G) when static RP configure
             in FHR router

    Topology used:
                ________r2_____
                |             |
      iperf     |             |     iperf
        r0-----r1-------------r3-----r5

    r1 : LHR
    r3 : FHR/RP
    """
    tgen = get_topogen()
    tc_name = request.node.name
    write_test_header(tc_name)

    # Don"t run this test if we have any failure.
    if tgen.routers_have_failure():
        pytest.skip(tgen.errors)

    step("Creating configuration from JSON")
    reset_config_on_routers(tgen)
    app_helper.stop_all_hosts()
    clear_mroute(tgen)
    clear_pim_interface_traffic(tgen, TOPO)

    step("Enable IGMP on r1 interface")
    step("Configure RP on r2 (loopback interface) for the group range"
         " 225.1.1.0/24")
    step("Enable the PIM on all the interfaces of r1, r2, r3 and r4 routers")
    step("Send multicast traffic from r5")
    step("Send the IGMP join from r0")

    step("r1, r2, r3, r4: Delete existing RP configuration"
         "configure r3(FHR) as RP")
    input_dict = {
        "r1": {
            "pim": {
                "rp": [{
                    "rp_addr": "1.0.2.17",
                    "group_addr_range": GROUP_RANGE_ALL,
                    "delete": True,
                }]
            }
        },
        "r2": {
            "pim": {
                "rp": [{
                    "rp_addr": "1.0.2.17",
                    "group_addr_range": GROUP_RANGE_ALL,
                    "delete": True,
                }]
            }
        },
        "r3": {
            "pim": {
                "rp": [{
                    "rp_addr": "1.0.2.17",
                    "group_addr_range": GROUP_RANGE_ALL,
                    "delete": True,
                }]
            }
        },
        "r4": {
            "pim": {
                "rp": [{
                    "rp_addr": "1.0.2.17",
                    "group_addr_range": GROUP_RANGE_ALL,
                    "delete": True,
                }]
            }
        },
    }

    result = create_pim_config(tgen, TOPO, input_dict)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1, r2, r3, r4: Configure r3(FHR) as RP")
    input_dict = {
        "r1": {
            "pim": {
                "rp": [{
                    "rp_addr": "1.0.3.17",
                    "group_addr_range": GROUP_RANGE_ALL,
                }]
            }
        },
        "r2": {
            "pim": {
                "rp": [{
                    "rp_addr": "1.0.3.17",
                    "group_addr_range": GROUP_RANGE_ALL,
                }]
            }
        },
        "r3": {
            "pim": {
                "rp": [{
                    "rp_addr": "1.0.3.17",
                    "group_addr_range": GROUP_RANGE_ALL,
                }]
            }
        },
        "r4": {
            "pim": {
                "rp": [{
                    "rp_addr": "1.0.3.17",
                    "group_addr_range": GROUP_RANGE_ALL,
                }]
            }
        },
    }

    result = create_pim_config(tgen, TOPO, input_dict)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify RP info")
    dut = "r1"
    rp_address = "1.0.3.17"
    iif = "r1-r3-eth2"
    result = verify_pim_rp_info(tgen, TOPO, dut, GROUP_RANGE_ALL, iif,
                                rp_address, SOURCE)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r5: Send multicast traffic for group 225.1.1.1")
    result = app_helper.run_traffic("r5", GROUP_ADDRESS, "r3")
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r0: Send IGMP join")
    result = app_helper.run_join("r0", GROUP_ADDRESS, "r1")
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r0: Verify IGMP groups")
    oif = "r1-r0-eth0"
    result = verify_igmp_groups(tgen, dut, oif, GROUP_ADDRESS)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify (*, G) upstream IIF interface")
    result = verify_upstream_iif(tgen, dut, iif, STAR, GROUP_ADDRESS)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify (*, G) upstream join state and join timer")
    result = verify_join_state_and_timer(tgen, dut, iif, STAR, GROUP_ADDRESS)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify (*, G) ip mroutes")
    result = verify_mroutes(tgen, dut, STAR, GROUP_ADDRESS, iif, oif)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify (S, G) upstream IIF interface")
    iif = "r1-r3-eth2"
    result = verify_upstream_iif(tgen, dut, iif, SOURCE_ADDRESS, GROUP_ADDRESS)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify (S, G) upstream join state and join timer")
    result = verify_join_state_and_timer(tgen, dut, iif, SOURCE_ADDRESS,
                                         GROUP_ADDRESS)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify (S, G) ip mroutes")
    result = verify_mroutes(tgen, dut, SOURCE_ADDRESS, GROUP_ADDRESS, iif, oif)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r3: Verify (S, G) upstream IIF interface")
    dut = "r3"
    iif = "r3-r5-eth3"
    result = verify_upstream_iif(tgen, dut, iif, SOURCE_ADDRESS, GROUP_ADDRESS)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r3: Verify (S, G) upstream join state and join timer")
    result = verify_join_state_and_timer(tgen,
                                         dut,
                                         iif,
                                         SOURCE_ADDRESS,
                                         GROUP_ADDRESS,
                                         expected=False)
    assert result is not True, (
        "Testcase {} : Failed \n "
        "r3: (S,G) upstream state is joined and join timer is running\n Error: {}"
        .format(tc_name, result))

    step("r3: Verify (S, G) ip mroutes")
    oif = "r3-r1-eth0"
    result = verify_mroutes(tgen, dut, SOURCE_ADDRESS, GROUP_ADDRESS, iif, oif)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    # Uncomment next line for debugging
    # tgen.mininet_cli()

    write_test_footer(tc_name)
def test_configuring_igmp_local_join_on_reciever_dr_non_dr_nodes_p1(request):
    """
    Configure IGMP local join on DR and non DR
    """

    tgen = get_topogen()
    tc_name = request.node.name
    write_test_header(tc_name)

    # Creating configuration from JSON
    app_helper.stop_all_hosts()
    clear_mroute(tgen)
    check_router_status(tgen)
    reset_config_on_routers(tgen)
    clear_pim_interface_traffic(tgen, topo)

    # Don"t run this test if we have any failure.
    if tgen.routers_have_failure():
        pytest.skip(tgen.errors)

    step("Configure IGMP and PIM on switch connected receiver nodes")
    step("Configure PIM on all upstream interfaces")

    step("Configure link between R1, R2 ,R3 and receiver on" " same vlan")
    step("Make sure R1 is DR initially configuring highest IP on R1 and R2 "
         "second highest, R1 is lower")

    intf_r1_s1 = topo["routers"]["r1"]["links"]["s1"]["interface"]
    intf_r1_s1_addr = topo["routers"]["r1"]["links"]["s1"]["ipv4"]

    intf_r2_s1 = topo["routers"]["r2"]["links"]["s1"]["interface"]
    intf_r2_s1_addr = topo["routers"]["r2"]["links"]["s1"]["ipv4"]

    intf_i1_s1 = topo["routers"]["i1"]["links"]["s1"]["interface"]
    intf_i1_s1_addr = topo["routers"]["i1"]["links"]["s1"]["ipv4"]

    vlan_input = {
        "r1": {
            "vlan": {
                VLAN_1: [{
                    intf_r1_s1: {
                        "ip": SAME_VLAN_IP_1["ip"],
                        "subnet": SAME_VLAN_IP_1["subnet"],
                    }
                }]
            }
        },
        "r2": {
            "vlan": {
                VLAN_1: [{
                    intf_r2_s1: {
                        "ip": SAME_VLAN_IP_2["ip"],
                        "subnet": SAME_VLAN_IP_2["subnet"],
                    }
                }]
            }
        },
        "i1": {
            "vlan": {
                VLAN_1: [{
                    intf_i1_s1: {
                        "ip": SAME_VLAN_IP_4["ip"],
                        "subnet": SAME_VLAN_IP_4["subnet"],
                    }
                }]
            }
        },
    }

    add_interfaces_to_vlan(tgen, vlan_input)

    raw_config = {
        "r1": {
            "raw_config": [
                "interface {}".format(intf_r1_s1),
                "no ip address {}".format(intf_r1_s1_addr),
                "no ip pim",
            ]
        },
        "r2": {
            "raw_config": [
                "interface {}".format(intf_r2_s1),
                "no ip address {}".format(intf_r2_s1_addr),
                "no ip pim",
            ]
        },
        "i1": {
            "raw_config": [
                "interface {}".format(intf_i1_s1),
                "no ip address {}".format(intf_i1_s1_addr),
            ]
        },
    }

    result = apply_raw_config(tgen, raw_config)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    raw_config = {
        "r1": {
            "raw_config": [
                "interface {}.{}".format(intf_r1_s1, VLAN_1),
                "ip address {}/{}".format(SAME_VLAN_IP_1["ip"],
                                          SAME_VLAN_IP_1["cidr"]),
                "ip pim",
                "ip igmp",
                "ip igmp version 2",
            ]
        },
        "r2": {
            "raw_config": [
                "interface {}.{}".format(intf_r2_s1, VLAN_1),
                "ip address {}/{}".format(SAME_VLAN_IP_2["ip"],
                                          SAME_VLAN_IP_2["cidr"]),
                "ip pim",
                "ip igmp",
                "ip igmp version 2",
            ]
        },
        "i1": {
            "raw_config": [
                "interface {}.{}".format(intf_i1_s1, VLAN_1),
                "ip address {}/{}".format(SAME_VLAN_IP_4["ip"],
                                          SAME_VLAN_IP_4["cidr"]),
            ]
        },
    }

    result = apply_raw_config(tgen, raw_config)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    for dut, intf in zip(["r1", "r2"], [intf_r1_s1, intf_r2_s1]):
        raw_config = {
            dut: {
                "raw_config": [
                    "interface {}.{}".format(intf, VLAN_1),
                    "ip pim hello {} {}".format(HELLO_TIMER, HOLD_TIMER),
                ]
            }
        }
        result = apply_raw_config(tgen, raw_config)
        assert result is True, "Testcase {} : Failed Error: {}".format(
            tc_name, result)

    step("Configure R4 as RP on all the nodes for group range 224.0.0.0/24")

    input_dict = {
        "r4": {
            "pim": {
                "rp": [{
                    "rp_addr":
                    topo["routers"]["r4"]["links"]["lo"]["ipv4"].split("/")[0],
                    "group_addr_range":
                    GROUP_RANGE_1 + GROUP_RANGE_3,
                }]
            }
        }
    }

    result = create_pim_config(tgen, topo, input_dict)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    step("Send IGMP local join for groups 226.1.1.1 to 226.1.1.5")

    vlan_intf_r1_s1 = "{}.{}".format(intf_r1_s1, VLAN_1)
    input_dict = {
        "r1": {
            "igmp": {
                "interfaces": {
                    vlan_intf_r1_s1: {
                        "igmp": {
                            "version": "2",
                            "join": IGMP_JOIN_RANGE_1
                        }
                    }
                }
            }
        }
    }

    result = create_igmp_config(tgen, topo, input_dict)
    assert result is True, "Testcase {}: Failed Error: {}".format(
        tc_name, result)

    step("Enable OSPF between all the nodes")

    step("Configure local join on R1 for group range (227.1.1.1)")

    vlan_intf_r1_s1 = "{}.{}".format(intf_r1_s1, VLAN_1)
    input_dict = {
        "r1": {
            "igmp": {
                "interfaces": {
                    vlan_intf_r1_s1: {
                        "igmp": {
                            "version": "2",
                            "join": IGMP_JOIN_RANGE_3
                        }
                    }
                }
            }
        }
    }

    result = create_igmp_config(tgen, topo, input_dict)
    assert result is True, "Testcase {}: Failed Error: {}".format(
        tc_name, result)

    step("Start traffic from R4 connected source")

    input_src = {"i2": topo["routers"]["i2"]["links"]["r5"]["interface"]}

    result = app_helper.run_traffic("i2",
                                    IGMP_JOIN_RANGE_1 + IGMP_JOIN_RANGE_3,
                                    "r5")
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    step("R1, R2 and R2 has IGMP groups for 226.x.x.x and 227.1.1.1 groups")

    intf_r1_s1 = "{}.{}".format(
        topo["routers"]["r1"]["links"]["s1"]["interface"], VLAN_1)
    intf_r2_s1 = "{}.{}".format(
        topo["routers"]["r2"]["links"]["s1"]["interface"], VLAN_1)

    for dut, intf in zip(["r1", "r2"], [intf_r1_s1, intf_r2_s1]):
        result = verify_igmp_groups(tgen, dut, intf,
                                    IGMP_JOIN_RANGE_1 + IGMP_JOIN_RANGE_3)
        assert result is True, "Testcase {} : Failed Error: {}".format(
            tc_name, result)

    step("R1 is DR, R2 has 226.x.x.x and 227.1.1.1 (*,G) mroute with SC flag")
    step("(S,G) mroute for 226.1.1.1 group present on R2")

    source_i2 = topo["routers"]["i2"]["links"]["r5"]["ipv4"].split("/")[0]
    input_dict_r2 = [{
        "dut":
        "r2",
        "src_address":
        "*",
        "iif":
        topo["routers"]["r2"]["links"]["r4"]["interface"],
        "oil":
        "{}.{}".format(topo["routers"]["r2"]["links"]["s1"]["interface"],
                       VLAN_1),
    }]

    for data in input_dict_r2:
        result = verify_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1 + IGMP_JOIN_RANGE_3,
            data["iif"],
            data["oil"],
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(
            tc_name, result)

    for dut, flag in zip(["r2"], ["SC"]):
        step("{} has (*,G) flag as {}".format(dut, flag))
        result = verify_multicast_flag_state(tgen, dut, "*", IGMP_JOIN_RANGE_1,
                                             flag)
        assert result is True, "Testcase {} : Failed Error: {}".format(
            tc_name, result)

    step("Delete local join from DR node")
    for _join in IGMP_JOIN_RANGE_3:
        input_dict = {
            "r1": {
                "igmp": {
                    "interfaces": {
                        vlan_intf_r1_s1: {
                            "igmp": {
                                "join": [_join],
                                "delete_attr": True,
                            }
                        }
                    }
                }
            }
        }

        result = create_igmp_config(tgen, topo, input_dict)
        assert result is True, "Testcase {}: Failed Error: {}".format(
            tc_name, result)

        step(
            "After removing local join 227.1.1.1 group removed from IGMP join "
            "of R1, R2 node , using 'show ip igmp groups json'")

        for dut, intf in zip(["r1", "r2"], [intf_r1_s1, intf_r2_s1]):
            result = verify_igmp_groups(tgen,
                                        dut,
                                        intf,
                                        IGMP_JOIN_RANGE_3,
                                        expected=False)
            assert result is not True, (
                "Testcase {} : Failed \n "
                "IGMP groups are still present \n Error: {}".format(
                    tc_name, result))

    step("(*,G) mroute for 227.1.1.1 group removed from R1 node")
    step(
        "After remove of local join from R1 and R2 node verify (*,G) and (S,G) "
        "mroutes should not present on R1, R2 and R3 nodes")

    for data in input_dict_r2:
        result = verify_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            data["iif"],
            data["oil"],
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(
            tc_name, result)

        result = verify_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_3,
            data["iif"],
            data["oil"],
            expected=False,
        )
        assert (
            result is not True
        ), "Testcase {} : Failed \n " "mroutes are still present \n Error: {}".format(
            tc_name, result)

    step("Configure local join on R2 for group range (227.1.1.1)")

    input_dict = {
        "r2": {
            "igmp": {
                "interfaces": {
                    intf_r2_s1: {
                        "igmp": {
                            "version": "2",
                            "join": IGMP_JOIN_RANGE_3
                        }
                    }
                }
            }
        }
    }

    result = create_igmp_config(tgen, topo, input_dict)
    assert result is True, "Testcase {}: Failed Error: {}".format(
        tc_name, result)

    step(
        "After configuring local join on R2 non DR node, IGMP groups for 26.x.x.x and "
        "227.1.1.1 present on all the nodes")

    for dut, intf in zip(["r1", "r2"], [intf_r1_s1, intf_r2_s1]):
        result = verify_igmp_groups(tgen, dut, intf,
                                    IGMP_JOIN_RANGE_1 + IGMP_JOIN_RANGE_3)
        assert result is True, "Testcase {} : Failed Error: {}".format(
            tc_name, result)

    step("R2 has 227.1.1.1 (*,G) mroute with SC flag")

    for dut, flag in zip(["r2"], ["SC"]):
        step("{} has (*,G) flag as {}".format(dut, flag))
        result = verify_multicast_flag_state(tgen, dut, "*", IGMP_JOIN_RANGE_3,
                                             flag)
        assert result is True, "Testcase {} : Failed Error: {}".format(
            tc_name, result)

    step("Configure local join on R1 for group range (227.1.1.1)")

    input_dict = {
        "r1": {
            "igmp": {
                "interfaces": {
                    vlan_intf_r1_s1: {
                        "igmp": {
                            "version": "2",
                            "join": IGMP_JOIN_RANGE_3
                        }
                    }
                }
            }
        }
    }

    result = create_igmp_config(tgen, topo, input_dict)
    assert result is True, "Testcase {}: Failed Error: {}".format(
        tc_name, result)

    step(
        "After configuring 227.1.1.1 on R1 node, verify no change on IGMP groups on all the nodes"
    )

    for dut, intf in zip(["r1", "r2"], [intf_r1_s1, intf_r2_s1]):
        result = verify_igmp_groups(tgen, dut, intf,
                                    IGMP_JOIN_RANGE_1 + IGMP_JOIN_RANGE_3)
        assert result is True, "Testcase {} : Failed Error: {}".format(
            tc_name, result)

    step("R2 has 227.1.1.1 (*,G) mroute with SC flag")

    step("r2 has (*,G) flag as SC")
    result = verify_multicast_flag_state(tgen, "r2", "*", IGMP_JOIN_RANGE_3,
                                         "SC")
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    step("R1 should not have (*,G) join and (S,G) join present")

    input_dict_r1 = [
        {
            "dut":
            "r1",
            "src_address":
            "*",
            "iif":
            topo["routers"]["r1"]["links"]["r4"]["interface"],
            "oil":
            "{}.{}".format(topo["routers"]["r1"]["links"]["s1"]["interface"],
                           VLAN_1),
        },
        {
            "dut":
            "r1",
            "src_address":
            source_i2,
            "iif":
            topo["routers"]["r1"]["links"]["r4"]["interface"],
            "oil":
            "{}.{}".format(topo["routers"]["r1"]["links"]["s1"]["interface"],
                           VLAN_1),
        },
    ]

    for data in input_dict_r1:
        result = verify_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1 + IGMP_JOIN_RANGE_3,
            data["iif"],
            data["oil"],
            expected=False,
        )
        assert (
            result is not True
        ), "Testcase {} : Failed \n " "mroutes are still present \n Error: {}".format(
            tc_name, result)

    step("Remove local join from DR and Non DR node")

    input_dict = {
        "r1": {
            "igmp": {
                "interfaces": {
                    vlan_intf_r1_s1: {
                        "igmp": {
                            "version": "2",
                            "join": IGMP_JOIN_RANGE_3,
                            "delete_attr": True,
                        }
                    }
                }
            }
        },
        "r2": {
            "igmp": {
                "interfaces": {
                    intf_r2_s1: {
                        "igmp": {
                            "version": "2",
                            "join": IGMP_JOIN_RANGE_3,
                            "delete_attr": True,
                        }
                    }
                }
            }
        },
    }

    result = create_igmp_config(tgen, topo, input_dict)
    assert result is True, "Testcase {}: Failed Error: {}".format(
        tc_name, result)

    step(
        "After remove of local join from R1 and R2 node verify (*,G) and (S,G) mroutes "
        "should not present on R1, R2 nodes")

    for data in input_dict_r1:
        result = verify_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1 + IGMP_JOIN_RANGE_3,
            data["iif"],
            data["oil"],
            expected=False,
        )
        assert (
            result is not True
        ), "Testcase {} : Failed \n " "mroutes are still present \n Error: {}".format(
            tc_name, result)

    for data in input_dict_r2:
        result = verify_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1 + IGMP_JOIN_RANGE_3,
            data["iif"],
            data["oil"],
            expected=False,
        )
        assert (
            result is not True
        ), "Testcase {} : Failed \n " "mroutes are still present \n Error: {}".format(
            tc_name, result)

    write_test_footer(tc_name)