def _install_ds(self, general, slapd, backends):
"""
Actually install the Ds from the dicts provided.
You should never call this directly, as it bypasses assertions.
"""
######################## WARNING #############################
# DO NOT CHANGE THIS FUNCTION OR ITS CONTENTS WITHOUT READING
# ALL OF THE COMMENTS FIRST. THERE ARE VERY DELICATE
# AND DETAILED INTERACTIONS OF COMPONENTS IN THIS FUNCTION.
#
# IF IN DOUBT CONTACT WILLIAM BROWN <*****@*****.**>
### This first section is about creating the *minimal* required paths and config to get
# directory server to start: After this, we then perform all configuration as online
# changes from after this point.
# Create dse.ldif with a temporary root password.
# This is done first, because instances are found for removal and listing by detecting
# the present of their dse.ldif!!!!
# The template is in slapd['data_dir']/dirsrv/data/template-dse.ldif
# Variables are done with %KEY%.
self.log.debug("ACTION: Creating dse.ldif")
try:
os.umask(
0o007
) # For parent dirs that get created -> sets 770 for perms
os.makedirs(slapd['config_dir'], mode=0o770)
except OSError:
pass
# Get suffix for some plugin defaults (if possible)
# annoyingly for legacy compat backend takes TWO key types
# and we have to now deal with that ....
#
# Create ds_suffix here else it won't be in scope ....
ds_suffix = ''
if len(backends) > 0:
ds_suffix = normalizeDN(backends[0]['nsslapd-suffix'])
dse = ""
with open(
os.path.join(slapd['data_dir'], 'dirsrv', 'data',
'template-dse.ldif')) as template_dse:
for line in template_dse.readlines():
dse += line.replace('%', '{', 1).replace('%', '}', 1)
# Check if we are in a container, if so don't use /dev/shm for the db home dir
# as containers typically don't allocate enough space for dev/shm and we don't
# want to unexpectedly break the server after an upgrade
#
# If we know we are are in a container, we don't need to re-detect on systemd.
# It actually turns out if you add systemd-detect-virt, that pulls in system
# which subsequently breaks containers starting as instance.start then believes
# it COULD check the ds status. The times we need to check for systemd are mainly
# in other environments that use systemd natively in their containers.
container_result = 1
if not self.containerised:
container_result = subprocess.run(["systemd-detect-virt", "-c"],
stdout=subprocess.PIPE)
if self.containerised or container_result.returncode == 0:
# In a container, set the db_home_dir to the db path
self.log.debug(
"Container detected setting db home directory to db directory."
)
slapd['db_home_dir'] = slapd['db_dir']
with open(os.path.join(slapd['config_dir'], 'dse.ldif'),
'w') as file_dse:
dse_fmt = dse.format(
schema_dir=slapd['schema_dir'],
lock_dir=slapd['lock_dir'],
tmp_dir=slapd['tmp_dir'],
cert_dir=slapd['cert_dir'],
ldif_dir=slapd['ldif_dir'],
bak_dir=slapd['backup_dir'],
run_dir=slapd['run_dir'],
inst_dir=slapd['inst_dir'],
log_dir=slapd['log_dir'],
fqdn=general['full_machine_name'],
ds_port=slapd['port'],
ds_user=slapd['user'],
rootdn=slapd['root_dn'],
instance_name=slapd['instance_name'],
ds_passwd=self.
_secure_password, # We set our own password here, so we can connect and mod.
# This is because we never know the users input root password as they can validly give
# us a *hashed* input.
ds_suffix=ds_suffix,
config_dir=slapd['config_dir'],
db_dir=slapd['db_dir'],
db_home_dir=slapd['db_home_dir'],
db_lib=slapd['db_lib'],
ldapi_enabled="on",
ldapi=slapd['ldapi'],
ldapi_autobind="on",
)
file_dse.write(dse_fmt)
self.log.info("Create file system structures ...")
# Create all the needed paths
# we should only need to make bak_dir, cert_dir, config_dir, db_dir, ldif_dir, lock_dir, log_dir, run_dir?
for path in ('backup_dir', 'cert_dir', 'db_dir', 'db_home_dir',
'ldif_dir', 'lock_dir', 'log_dir', 'run_dir'):
self.log.debug("ACTION: creating %s", slapd[path])
try:
os.umask(
0o007
) # For parent dirs that get created -> sets 770 for perms
os.makedirs(slapd[path], mode=0o770)
except OSError:
pass
os.chown(slapd[path], slapd['user_uid'], slapd['group_gid'])
# /var/lock/dirsrv needs special attention...
parentdir = os.path.abspath(os.path.join(slapd['lock_dir'], os.pardir))
os.chown(parentdir, slapd['user_uid'], slapd['group_gid'])
### Warning! We need to down the directory under db too for .restore to work.
# During a restore, the db dir is deleted and recreated, which is why we need
# to own it for a restore.
#
# However, in a container, we can't always guarantee this due to how the volumes
# work and are mounted. Specifically, if we have an anonymous volume we will
# NEVER be able to own it, but in a true deployment it is reasonable to expect
# we DO own it. Thus why we skip it in this specific context
if not self.containerised:
db_parent = os.path.join(slapd['db_dir'], '..')
os.chown(db_parent, slapd['user_uid'], slapd['group_gid'])
# Copy correct data to the paths.
# Copy in the schema
# This is a little fragile, make it better.
# It won't matter when we move schema to usr anyway ...
_ds_shutil_copytree(
os.path.join(slapd['sysconf_dir'], 'dirsrv/schema'),
slapd['schema_dir'])
os.chown(slapd['schema_dir'], slapd['user_uid'], slapd['group_gid'])
os.chmod(slapd['schema_dir'], 0o770)
# Copy in the collation
srcfile = os.path.join(slapd['sysconf_dir'],
'dirsrv/config/slapd-collations.conf')
dstfile = os.path.join(slapd['config_dir'], 'slapd-collations.conf')
shutil.copy(srcfile, dstfile)
os.chown(dstfile, slapd['user_uid'], slapd['group_gid'])
os.chmod(dstfile, 0o440)
# Copy in the certmap configuration
srcfile = os.path.join(slapd['sysconf_dir'],
'dirsrv/config/certmap.conf')
dstfile = os.path.join(slapd['config_dir'], 'certmap.conf')
shutil.copy(srcfile, dstfile)
os.chown(dstfile, slapd['user_uid'], slapd['group_gid'])
os.chmod(dstfile, 0o440)
# If we are on the correct platform settings, systemd
if general['systemd']:
# Should create the symlink we need, but without starting it.
result = subprocess.run(
["systemctl", "enable",
"dirsrv@%s" % slapd['instance_name']],
stdout=subprocess.PIPE,
stderr=subprocess.PIPE)
args = ' '.join(ensure_list_str(result.args))
stdout = ensure_str(result.stdout)
stderr = ensure_str(result.stderr)
# Systemd encodes some odd charecters into it's symlink output on newer versions which
# can trip up the logger.
self.log.debug(
f"CMD: {args} ; STDOUT: {stdout} ; STDERR: {stderr}".encode(
"utf-8"))
# Setup tmpfiles_d
tmpfile_d = ds_paths.tmpfiles_d + "/dirsrv-" + slapd[
'instance_name'] + ".conf"
with open(tmpfile_d, "w") as TMPFILE_D:
TMPFILE_D.write("d {} 0770 {} {}\n".format(
slapd['run_dir'], slapd['user'], slapd['group']))
TMPFILE_D.write("d {} 0770 {} {}\n".format(
slapd['lock_dir'].replace(
"slapd-" + slapd['instance_name'], ""), slapd['user'],
slapd['group']))
TMPFILE_D.write("d {} 0770 {} {}\n".format(
slapd['lock_dir'], slapd['user'], slapd['group']))
# Else we need to detect other init scripts?
# WB: No, we just install and assume that docker will start us ...
# Bind sockets to our type?
# Create certdb in sysconfidir
self.log.debug("ACTION: Creating certificate database is %s",
slapd['cert_dir'])
# BELOW THIS LINE - all actions are now ONLINE changes to the directory server.
# if it all possible, ALWAYS ADD NEW INSTALLER CHANGES AS ONLINE ACTIONS.
# Should I move this import? I think this prevents some recursion
from lib389 import DirSrv
ds_instance = DirSrv(self.verbose, containerised=self.containerised)
if self.containerised:
ds_instance.systemd_override = general['systemd']
# By default SUSE does something extremely silly - it creates a hostname
# that CANT be resolved by DNS. As a result this causes all installs to
# fail. We need to guarantee that we only connect to localhost here, as
# it's the only stable and guaranteed way to connect to the instance
# at this point.
#
# Use ldapi which would prevent the need
# to configure a temp root pw in the setup phase.
args = {
SER_HOST: "localhost",
SER_PORT: slapd['port'],
SER_SERVERID_PROP: slapd['instance_name'],
SER_ROOT_DN: slapd['root_dn'],
SER_ROOT_PW: self._raw_secure_password,
SER_DEPLOYED_DIR: slapd['prefix'],
SER_LDAPI_ENABLED: 'on',
SER_LDAPI_SOCKET: slapd['ldapi'],
SER_LDAPI_AUTOBIND: 'on'
}
ds_instance.allocate(args)
# Does this work?
assert_c(ds_instance.exists(),
"Instance failed to install, does not exist when expected")
# Create a certificate database.
tlsdb = NssSsl(dirsrv=ds_instance, dbpath=slapd['cert_dir'])
if not tlsdb._db_exists():
tlsdb.reinit()
if slapd['self_sign_cert']:
self.log.info("Create self-signed certificate database ...")
etc_dirsrv_path = os.path.join(slapd['sysconf_dir'], 'dirsrv/')
ssca_path = os.path.join(etc_dirsrv_path, 'ssca/')
ssca = NssSsl(dbpath=ssca_path)
# If it doesn't exist, create a CA DB
if not ssca._db_exists():
ssca.reinit()
ssca.create_rsa_ca(months=slapd['self_sign_cert_valid_months'])
# If CA is expired or will expire soon,
# Reissue it and resign the existing certs that were signed by the cert previously
elif ssca.rsa_ca_needs_renew():
ca = ssca.renew_rsa_ca(
months=slapd['self_sign_cert_valid_months'])
# Import CA to the existing instances except the one we install now (we import it later)
for dir in os.listdir(etc_dirsrv_path):
if dir.startswith("slapd-") and dir != slapd['cert_dir']:
tlsdb_inst = NssSsl(
dbpath=os.path.join(etc_dirsrv_path, dir))
tlsdb_inst.import_rsa_crt(ca)
csr = tlsdb.create_rsa_key_and_csr(
alt_names=[general['full_machine_name']])
(ca, crt) = ssca.rsa_ca_sign_csr(csr)
tlsdb.import_rsa_crt(ca, crt)
if general['selinux']:
# Set selinux port label
selinux_label_port(slapd['secure_port'])
# Do selinux fixups
if general['selinux']:
self.log.info("Perform SELinux labeling ...")
selinux_paths = ('backup_dir', 'cert_dir', 'config_dir', 'db_dir',
'ldif_dir', 'lock_dir', 'log_dir', 'db_home_dir',
'run_dir', 'schema_dir', 'tmp_dir')
for path in selinux_paths:
selinux_restorecon(slapd[path])
selinux_label_port(slapd['port'])
# Start the server
# Make changes using the temp root
self.log.debug(f"asan_enabled={ds_instance.has_asan()}")
self.log.debug(
f"libfaketime installed ={'libfaketime' in sys.modules}")
assert_c(
not ds_instance.has_asan() or 'libfaketime' not in sys.modules,
"libfaketime python module is incompatible with ASAN build.")
ds_instance.start(timeout=60)
ds_instance.open()
# In some cases we may want to change log settings
# ds_instance.config.enable_log('audit')
# Create the configs related to this version.
base_config = get_config(general['defaults'])
base_config_inst = base_config(ds_instance)
base_config_inst.apply_config(install=True)
# Setup TLS with the instance.
# We *ALWAYS* set secure port, even if security is off, because it breaks
# tests with standalone.enable_tls if we do not. It's only when security; on
# that we actually start listening on it.
if not slapd['secure_port']:
slapd['secure_port'] = "636"
ds_instance.config.set('nsslapd-secureport',
'%s' % slapd['secure_port'])
if slapd['self_sign_cert']:
ds_instance.config.set('nsslapd-security', 'on')
# Before we create any backends, create any extra default indexes that may be
# dynamically provisioned, rather than from template-dse.ldif. Looking at you
# entryUUID (requires rust enabled).
#
# Indexes defaults to default_index_dn
indexes = Indexes(ds_instance)
if ds_instance.ds_paths.rust_enabled:
indexes.create(
properties={
'cn': 'entryUUID',
'nsSystemIndex': 'false',
'nsIndexType': ['eq', 'pres'],
})
# Create the backends as listed
# Load example data if needed.
for backend in backends:
self.log.info(
f"Create database backend: {backend['nsslapd-suffix']} ...")
is_sample_entries_in_props = "sample_entries" in backend
create_suffix_entry_in_props = backend.pop('create_suffix_entry',
False)
ds_instance.backends.create(properties=backend)
if not is_sample_entries_in_props and create_suffix_entry_in_props:
# Set basic ACIs
c_aci = '(targetattr="c || description || objectClass")(targetfilter="(objectClass=country)")(version 3.0; acl "Enable anyone c read"; allow (read, search, compare)(userdn="ldap:///anyone");)'
o_aci = '(targetattr="o || description || objectClass")(targetfilter="(objectClass=organization)")(version 3.0; acl "Enable anyone o read"; allow (read, search, compare)(userdn="ldap:///anyone");)'
dc_aci = '(targetattr="dc || description || objectClass")(targetfilter="(objectClass=domain)")(version 3.0; acl "Enable anyone domain read"; allow (read, search, compare)(userdn="ldap:///anyone");)'
ou_aci = '(targetattr="ou || description || objectClass")(targetfilter="(objectClass=organizationalUnit)")(version 3.0; acl "Enable anyone ou read"; allow (read, search, compare)(userdn="ldap:///anyone");)'
cn_aci = '(targetattr="cn || description || objectClass")(targetfilter="(objectClass=nscontainer)")(version 3.0; acl "Enable anyone cn read"; allow (read, search, compare)(userdn="ldap:///anyone");)'
suffix_rdn_attr = backend['nsslapd-suffix'].split(
'=')[0].lower()
if suffix_rdn_attr == 'dc':
domain = create_base_domain(ds_instance,
backend['nsslapd-suffix'])
domain.add('aci', dc_aci)
elif suffix_rdn_attr == 'o':
org = create_base_org(ds_instance,
backend['nsslapd-suffix'])
org.add('aci', o_aci)
elif suffix_rdn_attr == 'ou':
orgunit = create_base_orgunit(ds_instance,
backend['nsslapd-suffix'])
orgunit.add('aci', ou_aci)
elif suffix_rdn_attr == 'cn':
cn = create_base_cn(ds_instance, backend['nsslapd-suffix'])
cn.add('aci', cn_aci)
elif suffix_rdn_attr == 'c':
c = create_base_c(ds_instance, backend['nsslapd-suffix'])
c.add('aci', c_aci)
else:
# Unsupported rdn
raise ValueError(
"Suffix RDN '{}' in '{}' is not supported. Supported RDN's are: 'c', 'cn', 'dc', 'o', and 'ou'"
.format(suffix_rdn_attr, backend['nsslapd-suffix']))
# Create all required sasl maps: if we have a single backend ...
# our default maps are really really bad, and we should feel bad.
# they basically only work with a single backend, and they'll break
# GSSAPI in some cases too :(
if len(backends) > 0:
self.log.debug("Adding sasl maps for suffix %s" %
backend['nsslapd-suffix'])
backend = backends[0]
saslmappings = SaslMappings(ds_instance)
saslmappings.create(
properties={
'cn': 'rfc 2829 u syntax',
'nsSaslMapRegexString': '^u:\\(.*\\)',
'nsSaslMapBaseDNTemplate': backend['nsslapd-suffix'],
'nsSaslMapFilterTemplate': '(uid=\\1)'
})
# I think this is for LDAPI
saslmappings.create(
properties={
'cn': 'uid mapping',
'nsSaslMapRegexString': '^[^:@]+$',
'nsSaslMapBaseDNTemplate': backend['nsslapd-suffix'],
'nsSaslMapFilterTemplate': '(uid=&)'
})
else:
self.log.debug("Skipping default SASL maps - no backend found!")
self.log.info("Perform post-installation tasks ...")
# Change the root password finally
ds_instance.config.set('nsslapd-rootpw', slapd['root_password'])
# We need to log the password when containerised
if self.containerised:
self.log.debug("Root DN password: {}".format(
slapd['root_password']))
# Complete.
if general['start']:
# Restart for changes to take effect - this could be removed later
ds_instance.restart(post_open=False)
else:
# Just stop the instance now.
ds_instance.stop()
self.log.debug(" 🎉 Instance setup complete")
def _install_ds(self, general, slapd, backends):
"""
Actually install the Ds from the dicts provided.
You should never call this directly, as it bypasses assertions.
"""
######################## WARNING #############################
# DO NOT CHANGE THIS FUNCTION OR ITS CONTENTS WITHOUT READING
# ALL OF THE COMMENTS FIRST. THERE ARE VERY DELICATE
# AND DETAILED INTERACTIONS OF COMPONENTS IN THIS FUNCTION.
#
# IF IN DOUBT CONTACT WILLIAM BROWN <*****@*****.**>
### This first section is about creating the *minimal* required paths and config to get
# directory server to start: After this, we then perform all configuration as online
# changes from after this point.
# Create dse.ldif with a temporary root password.
# This is done first, because instances are found for removal and listing by detecting
# the present of their dse.ldif!!!!
# The template is in slapd['data_dir']/dirsrv/data/template-dse.ldif
# Variables are done with %KEY%.
self.log.debug("ACTION: Creating dse.ldif")
try:
os.umask(0o007) # For parent dirs that get created -> sets 770 for perms
os.makedirs(slapd['config_dir'], mode=0o770)
except OSError:
pass
# Get suffix for some plugin defaults (if possible)
# annoyingly for legacy compat backend takes TWO key types
# and we have to now deal with that ....
#
# Create ds_suffix here else it won't be in scope ....
ds_suffix = ''
if len(backends) > 0:
ds_suffix = normalizeDN(backends[0]['nsslapd-suffix'])
dse = ""
with open(os.path.join(slapd['data_dir'], 'dirsrv', 'data', 'template-dse.ldif')) as template_dse:
for line in template_dse.readlines():
dse += line.replace('%', '{', 1).replace('%', '}', 1)
with open(os.path.join(slapd['config_dir'], 'dse.ldif'), 'w') as file_dse:
file_dse.write(dse.format(
schema_dir=slapd['schema_dir'],
lock_dir=slapd['lock_dir'],
tmp_dir=slapd['tmp_dir'],
cert_dir=slapd['cert_dir'],
ldif_dir=slapd['ldif_dir'],
bak_dir=slapd['backup_dir'],
run_dir=slapd['run_dir'],
inst_dir=slapd['inst_dir'],
log_dir=slapd['log_dir'],
fqdn=general['full_machine_name'],
ds_port=slapd['port'],
ds_user=slapd['user'],
rootdn=slapd['root_dn'],
ds_passwd=self._secure_password, # We set our own password here, so we can connect and mod.
# This is because we never know the users input root password as they can validily give
# us a *hashed* input.
ds_suffix=ds_suffix,
config_dir=slapd['config_dir'],
db_dir=slapd['db_dir'],
))
# Create all the needed paths
# we should only need to make bak_dir, cert_dir, config_dir, db_dir, ldif_dir, lock_dir, log_dir, run_dir?
for path in ('backup_dir', 'cert_dir', 'db_dir', 'ldif_dir', 'lock_dir', 'log_dir', 'run_dir'):
self.log.debug("ACTION: creating %s", slapd[path])
try:
os.umask(0o007) # For parent dirs that get created -> sets 770 for perms
os.makedirs(slapd[path], mode=0o770)
except OSError:
pass
os.chown(slapd[path], slapd['user_uid'], slapd['group_gid'])
# /var/lock/dirsrv needs special attention...
parentdir = os.path.abspath(os.path.join(slapd['lock_dir'], os.pardir))
os.chown(parentdir, slapd['user_uid'], slapd['group_gid'])
### Warning! We need to down the directory under db too for .restore to work.
# See dblayer.c for more!
db_parent = os.path.join(slapd['db_dir'], '..')
os.chown(db_parent, slapd['user_uid'], slapd['group_gid'])
# Copy correct data to the paths.
# Copy in the schema
# This is a little fragile, make it better.
# It won't matter when we move schema to usr anyway ...
_ds_shutil_copytree(os.path.join(slapd['sysconf_dir'], 'dirsrv/schema'), slapd['schema_dir'])
os.chown(slapd['schema_dir'], slapd['user_uid'], slapd['group_gid'])
os.chmod(slapd['schema_dir'], 0o770)
# Copy in the collation
srcfile = os.path.join(slapd['sysconf_dir'], 'dirsrv/config/slapd-collations.conf')
dstfile = os.path.join(slapd['config_dir'], 'slapd-collations.conf')
shutil.copy2(srcfile, dstfile)
os.chown(dstfile, slapd['user_uid'], slapd['group_gid'])
os.chmod(dstfile, 0o440)
# Copy in the certmap configuration
srcfile = os.path.join(slapd['sysconf_dir'], 'dirsrv/config/certmap.conf')
dstfile = os.path.join(slapd['config_dir'], 'certmap.conf')
shutil.copy2(srcfile, dstfile)
os.chown(dstfile, slapd['user_uid'], slapd['group_gid'])
os.chmod(dstfile, 0o440)
# If we are on the correct platform settings, systemd
if general['systemd']:
# Should create the symlink we need, but without starting it.
subprocess.check_call(["systemctl",
"enable",
"dirsrv@%s" % slapd['instance_name']])
# Setup tmpfiles_d
tmpfile_d = ds_paths.tmpfiles_d + "/dirsrv-" + slapd['instance_name'] + ".conf"
with open(tmpfile_d, "w") as TMPFILE_D:
TMPFILE_D.write("d {} 0770 {} {}\n".format(slapd['run_dir'], slapd['user'], slapd['group']))
TMPFILE_D.write("d {} 0770 {} {}\n".format(slapd['lock_dir'].replace("slapd-" + slapd['instance_name'], ""),
slapd['user'], slapd['group']))
TMPFILE_D.write("d {} 0770 {} {}\n".format(slapd['lock_dir'], slapd['user'], slapd['group']))
# Else we need to detect other init scripts?
# WB: No, we just install and assume that docker will start us ...
# Bind sockets to our type?
# Create certdb in sysconfidir
self.log.debug("ACTION: Creating certificate database is %s", slapd['cert_dir'])
# BELOWE THIS LINE - all actions are now ONLINE changes to the directory server.
# if it all possible, ALWAYS ADD NEW INSTALLER CHANGES AS ONLINE ACTIONS.
# Should I move this import? I think this prevents some recursion
from lib389 import DirSrv
ds_instance = DirSrv(self.verbose)
if self.containerised:
ds_instance.systemd = general['systemd']
args = {
SER_PORT: slapd['port'],
SER_SERVERID_PROP: slapd['instance_name'],
SER_ROOT_DN: slapd['root_dn'],
SER_ROOT_PW: self._raw_secure_password,
SER_DEPLOYED_DIR: slapd['prefix']
}
ds_instance.allocate(args)
# Does this work?
assert_c(ds_instance.exists(), "Instance failed to install, does not exist when expected")
# Create a certificate database.
tlsdb = NssSsl(dbpath=slapd['cert_dir'])
if not tlsdb._db_exists():
tlsdb.reinit()
if slapd['self_sign_cert']:
etc_dirsrv_path = os.path.join(slapd['sysconf_dir'], 'dirsrv/')
ssca_path = os.path.join(etc_dirsrv_path, 'ssca/')
ssca = NssSsl(dbpath=ssca_path)
# If it doesn't exist, create a CA DB
if not ssca._db_exists():
ssca.reinit()
ssca.create_rsa_ca(months=slapd['self_sign_cert_valid_months'])
# If CA is expired or will expire soon,
# Reissue it and resign the existing certs that were signed by the cert previously
elif ssca.rsa_ca_needs_renew():
ca = ssca.renew_rsa_ca(months=slapd['self_sign_cert_valid_months'])
# Import CA to the existing instances except the one we install now (we import it later)
for dir in os.listdir(etc_dirsrv_path):
if dir.startswith("slapd-") and dir != slapd['cert_dir']:
tlsdb_inst = NssSsl(dbpath=os.path.join(etc_dirsrv_path, dir))
tlsdb_inst.import_rsa_crt(ca)
csr = tlsdb.create_rsa_key_and_csr()
(ca, crt) = ssca.rsa_ca_sign_csr(csr)
tlsdb.import_rsa_crt(ca, crt)
if general['selinux']:
# Set selinux port label
selinux_label_port(slapd['secure_port'])
# Do selinux fixups
if general['selinux']:
selinux_paths = ('backup_dir', 'cert_dir', 'config_dir', 'db_dir', 'ldif_dir',
'lock_dir', 'log_dir', 'run_dir', 'schema_dir', 'tmp_dir')
for path in selinux_paths:
selinux_restorecon(slapd[path])
selinux_label_port(slapd['port'])
# Start the server
# Make changes using the temp root
ds_instance.start(timeout=60)
ds_instance.open()
# In some cases we may want to change log settings
# ds_instance.config.enable_log('audit')
# Create the configs related to this version.
base_config = get_config(general['defaults'])
base_config_inst = base_config(ds_instance)
base_config_inst.apply_config(install=True)
# Setup TLS with the instance.
# We *ALWAYS* set secure port, even if security is off, because it breaks
# tests with standalone.enable_tls if we do not. It's only when security; on
# that we actually start listening on it.
if not slapd['secure_port']:
slapd['secure_port'] = "636"
ds_instance.config.set('nsslapd-secureport', '%s' % slapd['secure_port'])
if slapd['self_sign_cert']:
ds_instance.config.set('nsslapd-security', 'on')
# Create the backends as listed
# Load example data if needed.
for backend in backends:
is_sample_entries_in_props = "sample_entries" in backend
create_suffix_entry_in_props = backend.pop('create_suffix_entry', False)
ds_instance.backends.create(properties=backend)
if not is_sample_entries_in_props and create_suffix_entry_in_props:
domain = create_base_domain(ds_instance, backend['nsslapd-suffix'])
# Set basic ACI
domain.add('aci', [
# Allow reading the base domain object
'(targetattr="dc || description || objectClass")(targetfilter="(objectClass=domain)")(version 3.0; acl "Enable anyone domain read"; allow (read, search, compare)(userdn="ldap:///anyone");)',
# Allow reading the ou
'(targetattr="ou || objectClass")(targetfilter="(objectClass=organizationalUnit)")(version 3.0; acl "Enable anyone ou read"; allow (read, search, compare)(userdn="ldap:///anyone");)'
])
# Initialise ldapi socket information. IPA expects this ....
ldapi_path = os.path.join(slapd['local_state_dir'], "run/slapd-%s.socket" % slapd['instance_name'])
ds_instance.config.set('nsslapd-ldapifilepath', ldapi_path)
ds_instance.config.set('nsslapd-ldapilisten', 'on')
ds_instance.config.set('nsslapd-ldapiautobind', 'on')
ds_instance.config.set('nsslapd-ldapimaprootdn', slapd['root_dn'])
# Create all required sasl maps: if we have a single backend ...
# our default maps are really really bad, and we should feel bad.
# they basically only work with a single backend, and they'll break
# GSSAPI in some cases too :(
if len(backends) > 0:
self.log.debug("Adding sasl maps for suffix %s" % backend['nsslapd-suffix'])
backend = backends[0]
saslmappings = SaslMappings(ds_instance)
saslmappings.create(properties={
'cn': 'rfc 2829 u syntax',
'nsSaslMapRegexString': '^u:\\(.*\\)',
'nsSaslMapBaseDNTemplate': backend['nsslapd-suffix'],
'nsSaslMapFilterTemplate': '(uid=\\1)'
})
# I think this is for LDAPI
saslmappings.create(properties={
'cn': 'uid mapping',
'nsSaslMapRegexString': '^[^:@]+$',
'nsSaslMapBaseDNTemplate': backend['nsslapd-suffix'],
'nsSaslMapFilterTemplate': '(uid=&)'
})
else:
self.log.debug("Skipping default SASL maps - no backend found!")
# Change the root password finally
ds_instance.config.set('nsslapd-rootpw', slapd['root_password'])
# We need to log the password when containerised
if self.containerised:
self.log.debug("Root DN password: {}".format(slapd['root_password']))
# Complete.
if general['start']:
# Restart for changes to take effect - this could be removed later
ds_instance.restart(post_open=False)
else:
# Just stop the instance now.
ds_instance.stop()