def setupStandardFields(connMgr):
definedFields = libgmsec_python.FieldList()
missionField = libgmsec_python.StringField("MISSION-ID", "MISSION")
satIdField = libgmsec_python.StringField("SAT-ID-PHYSICAL", "SPACECRAFT")
facilityField = libgmsec_python.StringField("FACILITY", "GMSEC Lab")
componentField = libgmsec_python.StringField("COMPONENT",
"validation_custom")
definedFields.append(missionField)
definedFields.append(satIdField)
definedFields.append(facilityField)
definedFields.append(componentField)
connMgr.setStandardFields(definedFields)
def setupStandardFields(connMgr):
definedFields = libgmsec_python.FieldList()
missionField = libgmsec_python.StringField("MISSION-ID", "MISSION")
satIdField = libgmsec_python.StringField("SAT-ID-PHYSICAL", "SPACECRAFT")
facilityField = libgmsec_python.StringField("FACILITY", "GMSEC Lab")
componentField = libgmsec_python.StringField("COMPONENT", "validation_custom")
definedFields.append(missionField)
definedFields.append(satIdField)
definedFields.append(facilityField)
definedFields.append(componentField)
if (connMgr.getSpecification().getVersion() >= libgmsec_python.GMSEC_ISD_2018_00):
domain1 = libgmsec_python.StringField("DOMAIN1", "MY-DOMAIN-1")
domain2 = libgmsec_python.StringField("DOMAIN2", "MY-DOMAIN-2")
definedFields.append(domain1)
definedFields.append(domain2)
connMgr.setStandardFields(definedFields)
def main():
if (len(sys.argv) <= 1):
usageMessage = "usage: " + sys.argv[0] + " mw-id=<middleware ID>"
print usageMessage
return -1
# Load the command-line input into a GMSEC Config object
config = libgmsec_python.Config()
for arg in sys.argv[1:]:
value = arg.split('=')
config.addValue(value[0], value[1])
# If it was not specified in the command-line arguments, set LOGLEVEL
# to 'INFO' and LOGFILE to 'stdout' to allow the program report output
# on the terminal/command line
initializeLogging(config)
# Enable Message validation. This parameter is "false" by default.
config.addValue("GMSEC-MSG-CONTENT-VALIDATE", "true")
# Tell the API that there is an additional layer of message schema to
# validate (The 'EXAMPLE' message definitions). This value is set to
# 0 (Only 'GMSEC' specification validation) by default.
# Note: These levels for validation are determined by the "LEVEL-X"
# attributes defined in the .DIRECTORY.xml file contained in the XML
# templates directory. In thise case, Level-0 means GMSEC and Level-1
# means EXAMPLE.
# Note: The GMSEC team envisions using message specifications in a
# layered hierarchical fashion. For example, the "GMSEC" message
# specification would be 'layer 0', followed by an organization-level
# message specification at 'layer 1' which builds upon the message
# specification outlined in the GMSEC ISD. This would be followed by
# a mission-level message specification at 'layer 2' and so on.
config.addValue("GMSEC-SCHEMA-LEVEL", "1")
# Tell the API where to find all of the schema files.
# Note: This example only demonstrates a simple usage case of this
# functionality. When using this functionality, if the intent is
# to use any of the GMSEC message definitions, then ALL of the XML
# template files must be contained in the same directory.
# e.g. GMSEC_API/templates/2016.00 (Or the location defined in
# GMSEC-SCHEMA-PATH)
config.addValue("GMSEC-SCHEMA-PATH", "templates")
libgmsec_python.logInfo(libgmsec_python.ConnectionManager.getAPIVersion())
try:
connMgr = libgmsec_python.ConnectionManager(config)
libgmsec_python.logInfo(
"Opening the connection to the middleware server")
connMgr.initialize()
libgmsec_python.logInfo(connMgr.getLibraryVersion())
definedFields = libgmsec_python.FieldList()
missionField = libgmsec_python.StringField("MISSION-ID", "MISSION")
satIdField = libgmsec_python.StringField("SAT-ID-PHYSICAL",
"SPACECRAFT")
facilityField = libgmsec_python.StringField("FACILITY", "GMSEC Lab")
componentField = libgmsec_python.StringField("COMPONENT",
"log_message")
definedFields.append(missionField)
definedFields.append(satIdField)
definedFields.append(facilityField)
definedFields.append(componentField)
connMgr.setStandardFields(definedFields)
# Create a Message using a subject defined in the XML template
# outlining our example addendum message definitions
message = libgmsec_python.MistMessage(EXAMPLE_MESSAGE_SUBJECT,
"MSG.LOG",
connMgr.getSpecification())
# Add all of the necessary Fields to our message
message.addField(libgmsec_python.U16Field("NUM-OF-EVENTS", 2))
message.setValue("EVENT.1", addTimeToString("AOS occurred at: "))
message.setValue("EVENT.2",
addTimeToString("Telemetry downlink began at: "))
connMgr.addStandardFields(message)
# Publish the message to the middleware bus
connMgr.publish(message)
# Display the XML string representation of the Message for
# the sake of review
libgmsec_python.logInfo("Published message:\n" + message.toXML())
# Setup a new message without some of the Required Fields and
# attempt to publish it (i.e. Trigger a validation failure)
badMessage = libgmsec_python.MistMessage(EXAMPLE_MESSAGE_SUBJECT,
"MSG.LOG",
connMgr.getSpecification())
try:
connMgr.publish(badMessage)
except libgmsec_python.Exception as e:
libgmsec_python.logError("This is an expected error:\n" + e.what())
# Disconnect from the middleware and clean up the Connection
connMgr.cleanup()
except libgmsec_python.Exception as e:
libgmsec_python.logError(e.what())
return -1
return 0
def main():
if(len(sys.argv) <= 1):
usageMessage = "usage: " + sys.argv[0] + " mw-id=<middleware ID>"
print usageMessage
return -1
# Load the command-line input into a GMSEC Config object
# A Config object is basically a key-value pair map which is used to
# pass configuration options into objects such as Connections,
# ConnectionManagers, Subscribe and Publish function calls, Messages,
# etc.
config = libgmsec_python.Config()
for arg in sys.argv[1:]:
value = arg.split('=')
config.addValue(value[0], value[1])
# If it was not specified in the command-line arguments, set LOGLEVEL
# to 'INFO' and LOGFILE to 'stdout' to allow the program report output
# on the terminal/command line
initializeLogging(config)
# Print the GMSEC API version number using the GMSEC Logging
# interface
# This is useful for determining which version of the API is
# configured within the environment
libgmsec_python.logInfo(libgmsec_python.ConnectionManager.getAPIVersion())
try:
# Create a ConnectionManager object
connManager = libgmsec_python.ConnectionManager(config)
# Open the connection to the middleware
libgmsec_python.logInfo("Opening the connection to the middleware server")
connManager.initialize()
# Output middleware client library version
libgmsec_python.logInfo(connManager.getLibraryVersion())
# Create all of the GMSEC Message header Fields which will
# be used by all GMSEC Messages
# Note: Since these Fields contain variable values which are
# based on the context in which they are used, they cannot be
# automatically populated using MistMessage.
definedFields = libgmsec_python.FieldList()
missionField = libgmsec_python.StringField("MISSION-ID", "MISSION")
# Note: SAT-ID-PHYSICAL is an optional header Field, according
satIdField = libgmsec_python.StringField("SAT-ID-PHYSICAL", "SPACECRAFT")
facilityField = libgmsec_python.StringField("FACILITY", "GMSEC Lab")
componentField = libgmsec_python.StringField("COMPONENT", "product_message")
definedFields.append(missionField)
definedFields.append(satIdField)
definedFields.append(facilityField)
definedFields.append(componentField)
# Use setStandardFields to define a set of header fields for
# all messages which are created or published on the
# ConnectionManager using the following functions:
# createLogMessage, publishLog, createHeartbeatMessage,
# startHeartbeatService, createResourceMessage,
# publishResourceMessage, or startResourceMessageService
connManager.setStandardFields(definedFields)
# Create a ProductFile object with the product name,
# description, version, file format, and the URI
externalFile = libgmsec_python.ProductFile("External File", "External File Description", "1.0.0", "TXT", "//hostname/dir/filename")
filePayload = bytearray()
for i in range(0, 256):
filePayload.append(i)
# Create a ProductFile object with the product name,
# description, version, format, binary array, and file size
binaryFile = libgmsec_python.ProductFile("File as Binary", "Binary File Description", "1.0.0", "BIN", filePayload, len(filePayload))
# Create a Product File Message with the subject,
# RESPONSE-STATUS Field value, Message type (publish, request,
# or reply), PROD-TYPE Field value, PROD-SUBTYPE Field value,
# and pass it the Specification object from the Connection
# Manager
productMessage = libgmsec_python.ProductFileMessage(PROD_MESSAGE_SUBJECT, libgmsec_python.ResponseStatus.SUCCESSFUL_COMPLETION, libgmsec_python.Message.PUBLISH, "AUTO", "DM", connManager.getSpecification())
productMessage.addProductFile(externalFile)
productMessage.addProductFile(binaryFile)
connManager.addStandardFields(productMessage)
libgmsec_python.logInfo("Publishing DEV message:\n" + productMessage.toXML())
connManager.publish(productMessage)
except libgmsec_python.Exception as e:
libgmsec_python.logError(e.what())
return -1
return 0
def main():
if (len(sys.argv) <= 1):
usageMessage = "usage: " + sys.argv[0] + " mw-id=<middleware ID>"
print usageMessage
return -1
# Load the command-line input into a GMSEC Config object
# A Config object is basically a key-value pair map which is used to
# pass configuration options into objects such as Connections,
# ConnectionManagers, Subscribe and Publish function calls, Messages,
# etc.
config = libgmsec_python.Config()
for arg in sys.argv[1:]:
value = arg.split('=')
config.addValue(value[0], value[1])
# If it was not specified in the command-line arguments, set LOGLEVEL
# to 'INFO' and LOGFILE to 'stdout' to allow the program report output
# on the terminal/command line
initializeLogging(config)
# Print the GMSEC API version number using the GMSEC Logging
# interface
# This is useful for determining which version of the API is
# configured within the environment
libgmsec_python.logInfo(libgmsec_python.ConnectionManager.getAPIVersion())
try:
# Create a ConnectionManager object
connManager = libgmsec_python.ConnectionManager(config)
# Open the connection to the middleware
libgmsec_python.logInfo(
"Opening the connection to the middleware server")
connManager.initialize()
# Output middleware client library version
libgmsec_python.logInfo(connManager.getLibraryVersion())
# Create all of the GMSEC Message header Fields which will
# be used by all GMSEC Messages
# Note: Since these Fields contain variable values which are
# based on the context in which they are used, they cannot be
# automatically populated using MistMessage.
definedFields = libgmsec_python.FieldList()
missionField = libgmsec_python.StringField("MISSION-ID", "MISSION")
# Note: SAT-ID-PHYSICAL is an optional header Field, according
# to the GMSEC ISD.
satIdField = libgmsec_python.StringField("SAT-ID-PHYSICAL",
"SPACECRAFT")
facilityField = libgmsec_python.StringField("FACILITY", "GMSEC Lab")
componentField = libgmsec_python.StringField("COMPONENT",
"mnemonic_message")
definedFields.append(missionField)
definedFields.append(satIdField)
definedFields.append(facilityField)
definedFields.append(componentField)
# Use setStandardFields to define a set of header fields for
# all messages which are created or published on the
# ConnectionManager using the following functions:
# createLogMessage, publishLog, createHeartbeatMessage,
# startHeartbeatService, createResourceMessage,
# publishResourceMessage, or startResourceMessageService
connManager.setStandardFields(definedFields)
# Populate the Mnemonic Sample(s)
mSample = libgmsec_python.MnemonicSample(
"MS1", libgmsec_python.I32Field("MS1", 15))
mSample.setEUValue(libgmsec_python.F32Field("My EU", 15.0))
mSample.setFlags(1)
mSample.setLimit(libgmsec_python.MnemonicSample.RED_HIGH)
# Implicitly set limit enable/disable with setting of limit
mSample.setQuality(True)
mSample.setStalenessStatus(False)
mSample.setTextValue("15")
mnemonic_samples = libgmsec_python.MnemonicSampleList()
mnemonic_samples.append(mSample)
# Add the Mnemonic values to a Mnemonic object
mnemonic = libgmsec_python.Mnemonic("M1", mnemonic_samples)
statusField = libgmsec_python.I16Field("status", 5)
mnemonic.setStatus(statusField)
mnemonic.setUnits("units")
# Build up the Schema ID -- This is used to identify the
# specific type of MVAL message to construct
schemaId = GMSEC_SPEC_VERSION + ".GMSEC.MSG.MVAL"
# Construct an MVAL Message and add the Mnemonic values to it
mvalMessage = libgmsec_python.MnemonicMessage(
MVAL_MESSAGE_SUBJECT, schemaId, connManager.getSpecification())
mvalMessage.addMnemonic(mnemonic)
# Add the header fields to the MVAL message
connManager.addStandardFields(mvalMessage)
libgmsec_python.logInfo("Publishing MVAL message:\n" +
mvalMessage.toXML())
connManager.publish(mvalMessage)
except libgmsec_python.Exception as e:
libgmsec_python.logError(e.what())
return -1
return 0
def main():
if (len(sys.argv) <= 1):
usageMessage = "usage: " + sys.argv[0] + " mw-id=<middleware ID>"
print usageMessage
return -1
# Load the command-line input into a GMSEC Config object
# A Config object is basically a key-value pair map which is used to
# pass configuration options into objects such as Connections,
# ConnectionManagers, Subscribe and Publish function calls, Messages,
# etc.
config = libgmsec_python.Config()
for arg in sys.argv[1:]:
value = arg.split('=')
config.addValue(value[0], value[1])
# If it was not specified in the command-line arguments, set LOGLEVEL
# to 'INFO' and LOGFILE to 'stdout' to allow the program report output
# on the terminal/command line
initializeLogging(config)
# Print the GMSEC API version number using the GMSEC Logging
# interface
# This is useful for determining which version of the API is
# configured within the environment
libgmsec_python.logInfo(libgmsec_python.ConnectionManager.getAPIVersion())
try:
# Create a ConnectionManager object
connManager = libgmsec_python.ConnectionManager(config)
# Open the connection to the middleware
libgmsec_python.logInfo(
"Opening the connection to the middleware server")
connManager.initialize()
# Output middleware client library version
libgmsec_python.logInfo(connManager.getLibraryVersion())
# Create all of the GMSEC Message header Fields which will
# be used by all GMSEC Messages
# Note: Since these Fields contain variable values which are
# based on the context in which they are used, they cannot be
# automatically populated using MistMessage.
definedFields = libgmsec_python.FieldList()
missionField = libgmsec_python.StringField("MISSION-ID", "MISSION")
# Note: SAT-ID-PHYSICAL is an optional header Field, according
# to the GMSEC ISD.
satIdField = libgmsec_python.StringField("SAT-ID-PHYSICAL",
"SPACECRAFT")
facilityField = libgmsec_python.StringField("FACILITY", "GMSEC Lab")
componentField = libgmsec_python.StringField("COMPONENT",
"device_message")
definedFields.append(missionField)
definedFields.append(satIdField)
definedFields.append(facilityField)
definedFields.append(componentField)
# Use setStandardFields to define a set of header fields for
# all messages which are created or published on the
# ConnectionManager using the following functions:
# createLogMessage, publishLog, createHeartbeatMessage,
# startHeartbeatService, createResourceMessage,
# publishResourceMessage, or startResourceMessageService
connManager.setStandardFields(definedFields)
paramVal = libgmsec_python.I32Field("DEVICE.1.PARAM.1.VALUE", 79)
param = libgmsec_python.DeviceParam("DEV parameter 1",
"parameter 1 timestamp", paramVal)
device1 = libgmsec_python.Device("device 1",
libgmsec_python.Device.RED)
device1.setGroup("group")
device1.setRole("role")
device1.setModel("model")
device1.setSerial("1138")
device1.setVersion("1.4.5.2.3.4.5")
devInfo = libgmsec_python.I16Field("info", 5)
device1.setInfo(devInfo)
devNum = libgmsec_python.I16Field("num", 5)
device1.setNumber(devNum)
device1.addParam(param)
# Construct an DEV Message and add the Device values to it
devMessage = libgmsec_python.DeviceMessage(
DEV_MESSAGE_SUBJECT, connManager.getSpecification())
devMessage.addDevice(device1)
connManager.addStandardFields(devMessage)
libgmsec_python.logInfo("Publishing DEV message:\n" +
devMessage.toXML())
connManager.publish(devMessage)
except libgmsec_python.Exception as e:
libgmsec_python.logError(e.what())
return -1
return 0
def main():
if (len(sys.argv) <= 1):
usageMessage = "usage: " + sys.argv[0] + " mw-id=<middleware ID>"
print usageMessage
return -1
# Load the command-line input into a GMSEC Config object
# A Config object is basically a key-value pair map which is used to
# pass configuration options into objects such as Connections,
# ConnectionManagers, Subscribe and Publish function calls, Messages,
# etc.
config = libgmsec_python.Config()
for arg in sys.argv[1:]:
value = arg.split('=')
config.addValue(value[0], value[1])
# If it was not specified in the command-line arguments, set LOGLEVEL
# to 'INFO' and LOGFILE to 'stdout' to allow the program report output
# on the terminal/command line
initializeLogging(config)
# Print the GMSEC API version number using the GMSEC Logging
# interface
# This is useful for determining which version of the API is
# configured within the environment
libgmsec_python.logInfo(libgmsec_python.ConnectionManager.getAPIVersion())
try:
# Create a ConnectionManager object
connManager = libgmsec_python.ConnectionManager(config)
# Open the connection to the middleware
libgmsec_python.logInfo(
"Opening the connection to the middleware server")
connManager.initialize()
# Output middleware client library version
libgmsec_python.logInfo(connManager.getLibraryVersion())
# Create all of the GMSEC Message header Fields which will
# be used by all GMSEC Messages
headerFields = libgmsec_python.FieldList()
version = connManager.getSpecification().getVersion()
missionField = libgmsec_python.StringField("MISSION-ID", "MY-MISSION")
facilityField = libgmsec_python.StringField("FACILITY", "MY-FACILITY")
componentField = libgmsec_python.StringField("COMPONENT",
"RESOURCE-SERVICE")
domain1Field = libgmsec_python.StringField("DOMAIN1", "MY-DOMAIN-1")
domain2Field = libgmsec_python.StringField("DOMAIN2", "MY-DOMAIN-2")
msgID = libgmsec_python.StringField("MSG-ID", "MY-MSG-ID")
headerFields.append(missionField)
headerFields.append(facilityField)
headerFields.append(componentField)
if (version == 201400):
headerFields.append(msgID)
elif (version >= 201800):
headerFields.append(domain1Field)
headerFields.append(domain2Field)
# Use setStandardFields to define a set of header fields for
# all messages which are created or published on the
# ConnectionManager using the following functions:
# createLogMessage, publishLog, createHeartbeatMessage,
# startHeartbeatService, createResourceMessage,
# publishResourceMessage, or startResourceMessageService
connManager.setStandardFields(headerFields)
# Create and publish a Resource message using
# createResourceMessage() and publish()
# Note: This is useful for applications which may need to add
# additional Fields to the Resource Messages which are not
# currently added by the GMSEC API
rsrcMsg = connManager.createResourceMessage(RSRC_MESSAGE_SUBJECT)
libgmsec_python.logInfo(
"Publishing the GMSEC C2CX RSRC message which was created using createResourceMessage():\n"
+ rsrcMsg.toXML())
connManager.publish(rsrcMsg)
# Kick off the Resource Service -- This will publish resource
# messages automatically every X seconds, where X is the second
# parameter provided to the startResourceMessageService() function.
# If an interval is not provided, the service will default to
# publishing a message every 60 seconds.
libgmsec_python.logInfo(
"Starting the Resource Message service, a message will be published every "
+ str(RSRC_PUBLISH_RATE) + " seconds")
connManager.startResourceMessageService(RSRC_MESSAGE_SUBJECT,
RSRC_PUBLISH_RATE)
# Wait for user input to end the program
libgmsec_python.logInfo(
"Publishing C2CX Resource Messages indefinitely, press <enter> to exit the program"
)
raw_input("")
# Stop the Heartbeat Service
connManager.stopResourceMessageService()
# Cleanup
connManager.cleanup()
except libgmsec_python.Exception as e:
libgmsec_python.logError(e.what())
return -1
return 0
def main():
if (len(sys.argv) <= 1):
print("Usage: " + sys.argv[0] + " mw-id=<middleware ID>")
return -1
# Setup configuration with the supplied command line arguments
config = libgmsec_python.Config()
for arg in sys.argv[1:]:
value = arg.split('=')
config.addValue(value[0], value[1])
# Unless otherwise configured, setup configuration that allows us to
# log messages to stderr.
initializeLogging(config)
# Display the version number of the GMSEC API
libgmsec_python.logInfo(libgmsec_python.ConnectionManager.getAPIVersion())
# Obtain the specification version that we are running with; if not provided, default to GMSEC_ISD_CURRENT
specVersion = config.getIntegerValue("gmsec-specification-version",
libgmsec_python.GMSEC_ISD_CURRENT)
# Define standard fields that will be included with the heartbeat messages
standardFields = libgmsec_python.FieldList()
component = libgmsec_python.StringField("COMPONENT", "HEARTBEAT-GENERATOR")
mission = libgmsec_python.StringField("MISSION-ID", "MY-MISSION")
satellite = libgmsec_python.StringField("SAT-ID-PHYSICAL", "MY-SAT-ID")
facility = libgmsec_python.StringField("FACILITY", "MY-FACILITY")
standardFields.push_back(component)
standardFields.push_back(mission)
standardFields.push_back(satellite)
standardFields.push_back(facility)
if specVersion == libgmsec_python.GMSEC_ISD_2014_00:
msgID = libgmsec_python.StringField("MSG-ID", "MY-MSG-ID")
standardFields.push_back(msgID)
elif specVersion >= libgmsec_python.GMSEC_ISD_2018_00:
domain1 = libgmsec_python.StringField("DOMAIN1", "MY-DOMAIN-1")
domain2 = libgmsec_python.StringField("DOMAIN2", "MY-DOMAIN-2")
standardFields.push_back(domain1)
standardFields.push_back(domain2)
try:
# Instantiate the heartbeat generator
hbgen = libgmsec_python.HeartbeatGenerator(config, HB_MESSAGE_SUBJECT,
HB_PUBLISH_RATE,
standardFields)
# Start the heartbeat generator
hbgen.start()
libgmsec_python.logInfo(
"Heartbeat Generator is running; use gmsub or other utility to monitor messages."
)
# Wait for input from user to stop the heartbeat generator
libgmsec_python.logInfo(
"Press <enter> to stop the heartbeat generator")
raw_input("")
# Stop the heartbeat generator
hbgen.stop()
libgmsec_python.logInfo("Heartbeat Generator has been stopped.")
except libgmsec_python.Exception as e:
libgmsec_python.logError(e.what())
return -1
return 0
def main():
if(len(sys.argv) <= 1):
usageMessage = "usage: " + sys.argv[0] + " mw-id=<middleware ID>"
print usageMessage
return -1
# Load the command-line input into a GMSEC Config object
# A Config object is basically a key-value pair map which is used to
# pass configuration options into objects such as Connections,
# ConnectionManagers, Subscribe and Publish function calls, Messages,
# etc.
config = libgmsec_python.Config()
for arg in sys.argv[1:]:
value = arg.split('=')
config.addValue(value[0], value[1])
# If it was not specified in the command-line arguments, set LOGLEVEL
# to 'INFO' and LOGFILE to 'stdout' to allow the program report output
# on the terminal/command line
initializeLogging(config)
# Print the GMSEC API version number using the GMSEC Logging
# interface
# This is useful for determining which version of the API is
# configured within the environment
libgmsec_python.logInfo(libgmsec_python.ConnectionManager.getAPIVersion())
try:
# Create a ConnectionManager object
connManager = libgmsec_python.ConnectionManager(config)
# Open the connection to the middleware
libgmsec_python.logInfo("Opening the connection to the middleware server")
connManager.initialize()
# Output middleware client library version
libgmsec_python.logInfo(connManager.getLibraryVersion())
# Begin the steps necessary to create a GMSEC-compliant LOG
# message using the ConnectionManager
# Create all of the GMSEC Message header Fields which will
# be used by all GMSEC Messages
# Note: Since these Fields contain variable values which are
# based on the context in which they are used, they cannot be
# automatically populated using MistMessage.
definedFields = libgmsec_python.FieldList()
missionField = libgmsec_python.StringField("MISSION-ID", "MISSION")
# Note: SAT-ID-PHYSICAL is an optional header Field, according
# to the GMSEC ISD.
satIdField = libgmsec_python.StringField("SAT-ID-PHYSICAL", "SPACECRAFT")
facilityField = libgmsec_python.StringField("FACILITY", "GMSEC Lab")
componentField = libgmsec_python.StringField("COMPONENT", "log_message")
definedFields.append(missionField)
definedFields.append(satIdField)
definedFields.append(facilityField)
definedFields.append(componentField)
# Use setStandardFields to define a set of header fields for
# all messages which are created or published on the
# ConnectionManager using the following functions:
# createLogMessage, publishLog, createHeartbeatMessage,
# startHeartbeatService, createResourceMessage,
# publishResourceMessage, or startResourceMessageService
connManager.setStandardFields(definedFields)
# Use MistMessage to construct a GMSEC LOG message based off
# of the latest XML templates provided with the GMSEC API.
# This will automatically populate the Message with all of the
# Fields which have specific values defined for them in the XML
# template files. For more information on which Fields have
# values defined for them, please review the XML template files
# located in GMSEC_API/templates.
# Note: The second parameter is an identifier for the type of
# message to construct.
logMsg = libgmsec_python.MistMessage(LOG_MESSAGE_SUBJECT, "MSG.LOG", connManager.getSpecification())
# Add the LOG-specific fields to the LOG message
# Note: Since these Fields contain variable values which are
# based on the context in which they are used, they cannot be
# automatically populated using MistMessage.
eventTime = "YYYY-DDD-HH:MM:SS.sss"
libgmsec_python.TimeUtil.formatTime(libgmsec_python.TimeUtil.getCurrentTime(), eventTime);
logMsg.addField(libgmsec_python.I16Field("SEVERITY",1))
logMsg.setValue("MSG-TEXT", "Creating an example GMSEC LOG Message")
logMsg.setValue("OCCURRENCE-TYPE", "SYS")
logMsg.setValue("SUBCLASS", "AST")
logMsg.setValue("EVENT-TIME", eventTime)
# Add the standard fields to the LOG message
connManager.addStandardFields(logMsg)
libgmsec_python.logInfo("Publishing LOG message:\n" + logMsg.toXML())
connManager.publish(logMsg)
except libgmsec_python.Exception as e:
libgmsec_python.logError(e.what())
return -1
return 0
def main(argv=None):
if (len(sys.argv) <= 1):
usageMessage = "usage: " + sys.argv[0] + " mw-id=<middleware ID>"
print usageMessage
return -1
# Load the command-line input into a GMSEC Config object
# A Config object is basically a key-value pair map which is used to
# pass configuration options into objects such as Connections,
# ConnectionManagers, Subscribe and Publish function calls, Messages,
# etc.
config = libgmsec_python.Config()
for arg in sys.argv[1:]:
value = arg.split('=')
config.addValue(value[0], value[1])
# If it was not specified in the command-line arguments, set LOGLEVEL
# to 'INFO' and LOGFILE to 'stdout' to allow the program report output
# on the terminal/command line
initializeLogging(config)
# Print the GMSEC API version number using the GMSEC Logging
# interface
# This is useful for determining which version of the API is
# configured within the environment
libgmsec_python.logInfo(libgmsec_python.ConnectionManager.getAPIVersion())
try:
# Create a ConnectionManager object
connManager = libgmsec_python.ConnectionManager(config)
# Open the connection to the middleware
libgmsec_python.logInfo(
"Opening the connection to the middleware server")
connManager.initialize()
# Output middleware client library version
libgmsec_python.logInfo(connManager.getLibraryVersion())
# Create all of the GMSEC Message header Fields which will
# be used by all GMSEC Messages
headerFields = libgmsec_python.FieldList()
missionField = libgmsec_python.StringField("MISSION-ID", "GMSEC")
facilityField = libgmsec_python.StringField("FACILITY", "GMSEC Lab")
componentField = libgmsec_python.StringField("COMPONENT",
"heartbeat_service")
headerFields.append(missionField)
headerFields.append(facilityField)
headerFields.append(componentField)
# Use setStandardFields to define a set of header fields for
# all messages which are created or published on the
# ConnectionManager using the following functions:
# createLogMessage, publishLog, createHeartbeatMessage,
# startHeartbeatService, createResourceMessage,
# publishResourceMessage, or startResourceMessageService
connManager.setStandardFields(headerFields)
# Note: Fields are immutable, so plan appropriately if you wish
# to re-use variable names!
# Create all of the GMSEC Message header Fields which
# will be used by all GMSEC HB Messages
hbStandardFields = libgmsec_python.FieldList()
pubRateField = libgmsec_python.U16Field("PUB-RATE", 30)
counterField = libgmsec_python.U16Field("COUNTER", 1)
# Note: COMPONENT-STATUS is an optional field used to
# denote the operating status of the component, the
# values are as follows:
# 0 - Debug
# 1 - Normal / Green
# 2 - Warning / Yellow
# 3 - Orange
# 4 - Error / Red
componentStatusField = libgmsec_python.I16Field("COMPONENT-STATUS", 0)
hbStandardFields.append(pubRateField)
hbStandardFields.append(counterField)
hbStandardFields.append(componentStatusField)
# Create and publish a Heartbeat message using
# createLogMessage() and publish()
# Note: This is useful for applications which may need
# to create proxy heartbeats on behalf of a subsystem,
# as creating multiple ConnectionManagers can consume
# more memory than necessary. In this case, extra
# logic would need to be added to handle the timing of
# the publications.
hbMsg = connManager.createHeartbeatMessage(HB_MESSAGE_SUBJECT,
hbStandardFields)
libgmsec_python.logInfo(
"Publishing the GMSEC C2CX HB message which was just created using createHeartbeatMessage():\n"
+ hbMsg.toXML())
connManager.publish(hbMsg)
# Kick off the Heartbeat Service -- This will publish
# heartbeat messages automatically every X seconds,
# where Xis the value which was provided for PUB-RATE
# Note: If PUB-RATE was not provided, it will default
# to 30 seconds per automatic Heartbeat publication
libgmsec_python.logInfo(
"Starting the Heartbeat service, a message will be published every "
+ pubRateField.getStringValue() + " seconds")
connManager.startHeartbeatService(HB_MESSAGE_SUBJECT, hbStandardFields)
# Use setHeartbeatServiceField to change the state of the
# COMPONENT-STATUS Field to indicate that the component has
# transitioned from a startup/debug state to a running/green
# state.
componentStatusField = libgmsec_python.I16Field("COMPONENT-STATUS", 1)
connManager.setHeartbeatServiceField(componentStatusField)
libgmsec_python.logInfo(
"Publishing C2CX Heartbeat Messages indefinitely, press <enter> to exit the program"
)
raw_input("")
# Stop the Heartbeat Service
connManager.stopHeartbeatService()
# Cleanup
connManager.cleanup()
except libgmsec_python.Exception as e:
libgmsec_python.logError(e.what())
return -1
return 0