def cfeatrues_reply_handler(data, fd, *arg):
#print ">>>OFPT_CFEATURES_REPLY"
body = data[8:]
msg = of.ofp_cfeatures_reply(body[0:24])
#bind the dpid and type (type, dpid)
Type = msg.OFPC_OTN_SWITCH * 4 + msg.OFPC_WAVE_SWITCH * 2 + msg.OFPC_IP_SWITCH
sock_dpid[fd] = [Type, msg.datapath_id]
port_info_raw = body[24:]
port_info = {}
#print ">>>port number:",len(port_info_raw)/72, "total length:", len(port_info_raw)
for i in range(len(port_info_raw) / 72):
port_info[i] = of.ofp_phy_cport(port_info_raw[i * 72:72 + i * 72])
#print ">>>port_no:",port_info[i].port_no,"i:",i
return None
def cfeatrues_reply_handler(data, fd, *arg):
#print ">>>OFPT_CFEATURES_REPLY"
body = data[8:]
msg = of.ofp_cfeatures_reply(body[0:24])
#bind the dpid and type (type, dpid)
Type = msg.OFPC_OTN_SWITCH*4 +msg.OFPC_WAVE_SWITCH*2 + msg.OFPC_IP_SWITCH
sock_dpid[fd]=[Type, msg.datapath_id]
port_info_raw = body[24:]
port_info = {}
#print ">>>port number:",len(port_info_raw)/72, "total length:", len(port_info_raw)
for i in range(len(port_info_raw)/72):
port_info[i] = of.ofp_phy_cport(port_info_raw[i*72:72+i*72])
#print ">>>port_no:",port_info[i].port_no,"i:",i
return None
def of2ofc(msg, buffer, dpid):
print "of->ofc converting"
if isinstance(msg, of.ofp_header):#it is a of packet.
if isinstance(msg.payload, of.ofp_packet_in):
# Save the buffer_id from pkt_in message. As 1. of.pkt_out message needs buffer_id
# 2. the in_port is only one kind of pkt, this method seems okay in linear or ring topo
#only need the ofp_header()/ofp_packet_in() part of the msg
print "packet in from port", msg.payload.in_port
buffer[msg.payload.in_port] = msg.payload.buffer_id
if isinstance(msg.payload, of.ofp_flow_mod):
#basic structure: of.ofp_header()/of.ofp_flow_wildcards()/of.ofp_match()/of.ofp_flow_mod()/other_ofp_actions()
#select info from match (VLAN) and actions (just copy)
pass
if isinstance(msg.payload, of.ofp_features_reply):
print"it is a ofp_features_reply packet"
#basic structure:0fc.ofp_header()/ofc.ofp_cfeatures_reply()/ofc.ofp_phy_cport()/sup_wave_port_bandwidth()[n]
pkt_parsed = msg.payload #feature_reply
port_info = msg.payload.payload
port_raw=str(port_info)
port_num = len(port_raw)/48
phy_port = {}
phy_cport = {}
MyPort = {}
sw = setting.creat_sw(pkt_parsed.datapath_id)
cfeatures_reply = ofc.ofp_cfeatures_reply(datapath_id = pkt_parsed.datapath_id,
n_buffers = pkt_parsed.n_buffers,
n_tables = pkt_parsed.n_tables,
n_cports = port_num,
#features
OFPC_OTN_SWITCH = sw.type_otn, #1<<31 if it is a otn switch
OFPC_WAVE_SWITCH = sw.type_wave, #1<<30
OFPC_IP_SWITCH = sw.type_ip, #1<<29
OFPC_ARP_MATCH_IP = pkt_parsed.OFPC_ARP_MATCH_IP,
OFPC_QUEUE_STATS = pkt_parsed.OFPC_QUEUE_STATS, #1<<6 Queue statistics
OFPC_IP_STREAM = pkt_parsed.OFPC_IP_STREAM, #1<<5 Can reassemble IP fragments
OFPC_RESERVED = pkt_parsed.OFPC_RESERVED, #1<<4 Reserved, must be zero
OFPC_STP = pkt_parsed.OFPC_STP, #1<<3 802.1d spanning tree
OFPC_PORT_STATS =pkt_parsed.OFPC_PORT_STATS, #1<<2 Port statistics
OFPC_TABLE_STATS = pkt_parsed.OFPC_TABLE_STATS, #1<<1 Table statistics
OFPC_FLOW_STATS = pkt_parsed.OFPC_FLOW_STATS, #1<<0 Flow statistics
actions = pkt_parsed.actions)
for i in xrange(port_num):
phy_port[i] = of.ofp_phy_port(port_raw[i*48:i*48+48])
MyPort[i] = setting.creat_port(pkt_parsed.datapath_id, phy_port[i].port_no)
phy_cport[i] = ofc.ofp_phy_cport(port_no = phy_port[i].port_no,
hw_addr = phy_port[i].hw_addr,
port_name = phy_port[i].port_name,
#config
not_defined = phy_port[i].not_defined,
OFPPC_NO_PACKET_IN = phy_port[i].OFPPC_NO_PACKET_IN,
OFPPC_NO_FWD = phy_port[i].OFPPC_NO_FWD,
OFPPC_NO_FLOOD = phy_port[i].OFPPC_NO_FLOOD,
OFPPC_NO_RECV_STP =phy_port[i].OFPPC_NO_RECV_STP,
OFPPC_NO_RECV = phy_port[i].OFPPC_NO_RECV,
OFPPC_NO_STP = phy_port[i].OFPPC_NO_STP,
OFPPC_PORT_DOWN =phy_port[i].OFPPC_PORT_DOWN,
#state
OFPPS_LINK_DOWN = 0,
curr = 0,
advertised = 0,
supported = 0,
peer = 0,
#expend for circuit switch ports.
OFPST_FIBER = MyPort[i].OFPST_FIBER, # 1<<15 can switch circuits based on SM/MM fiber
OFPST_WAVE = MyPort[i].OFPST_WAVE, # 1<<14 can switch circuits based on ITU-T lambdas
OFPST_T_OTN = MyPort[i].OFPST_T_OTN, # 1<<13 can switch circuits based on OTN standard
OFPST_T_SDH = MyPort[i].OFPST_T_SDH, # 1<<12 can switch circuits based on SDH standard
OFPST_T_SONET = MyPort[i].OFPST_T_SONET, # 1<<11 can switch circuits based on SONET standard
#NOT_DEFINED = 0, # Not used
OFPST_ETH = MyPort[i].OFPST_ETH, # 1<<4 can switch packets based on ETH headers
OFPST_VLAN = MyPort[i].OFPST_VLAN, # 1<<3 can switch packets based on VLAN tags
OFPST_MPLS = MyPort[i].OFPST_MPLS, # 1<<2 can switch packets based on MPLS labels
OFPST_IP = MyPort[i].OFPST_IP, # 1<<1 can switch packets based on IP headers
OFPST_L4 = MyPort[i].OFPST_L4, # 1<<0 can switch packets based on TCP/UDP headers
SUPP_SW_GRAN = MyPort[i].SUPP_SW_GRAN, #use for defined something ,waiting a second.
sup_sdh_port_bandwidth = MyPort[i].sup_sdh_port_bandwidth,
sup_otn_port_bandwidth = MyPort[i].sup_otn_port_bandwidth,
peer_port_no = MyPort[i].peer_port_no,
peer_datapath_id = MyPort[i].peer_datapath_id)\
/ofc.sup_wave_port_bandwidth(center_freq_lmda = MyPort[i].center_freq_lmda,
num_lmda = MyPort[i].num_lmda,
freq_space_lmda = MyPort[i].freq_space_lmda
)
cfeatures_reply =cfeatures_reply/phy_cport[i]
cfeatures_reply = ofc.ofp_header(type = 24, length =port_num*74+32,)/cfeatures_reply
return cfeatures_reply
ofc2of_dict_odu = { 0: lambda x:x+2000,
1: lambda x:x+2100,
2: lambda x:x+2200,
3: lambda x:x+2300}
ofc2of_dict_wave = lambda x:x+3000
##################################The code below is just for test,and you have no need to read it.#################################
if __name__ == "__main__":
# this convert (can) only match in-coming port and vlan
# 1. packet_in message
pkt_in_msg = ofc.ofp_header(type=6,length=104)/ofc.ofp_cfeatures_reply(datapath_id=1)/ofc.ofp_phy_cport()/ofc.sup_wave_port_bandwidth()
#pkt_in_msg.show()
ofc_pkt = of2ofc(pkt_in_msg, pkt_in_msg.datapath_id, 10) # get buffer_id
print ofc_pkt
"""
ofc_pkt = ofc.ofp_header()\
/ofc.ofp_cflow_mod()\
/ofc.ofp_connect_wildcards()\
/ofc.ofp_connect(nport_in=1, supp_sw_otn_gran_in=1, in_port=1)\
/of.ofp_action_header(type=3)\
/of.ofp_action_output(type=0, port=0xfffb, len=8)
#ofc_pkt.show()
"""
print buffer_id
# 2. parse ofc message
