async def initial_pin_setup(*a):
# First time they select a PIN of any type.
from login import LoginUX
lll = LoginUX()
pin = await lll.get_new_pin(
'Choose PIN', '''\
Pick the main wallet's PIN code now. Be more clever, but an example:
123-4567
It has two parts: prefix (123-) and suffix (-4567). \
Each part must between 2 to 6 digits long. Total length \
can be as long as 12 digits.
The prefix part determines the anti-phishing words you will \
see each time you login.
Your new PIN protects access to \
this Coldcard device and is not a factor in the wallet's \
seed words or private keys.
THERE IS ABSOLUTELY NO WAY TO RECOVER A FORGOTTEN PIN! Write it down.
''')
del lll
if pin is None: return
# A new pin is to be set!
from main import pa, dis, settings, loop
dis.fullscreen("Saving...")
try:
assert pa.is_blank()
pa.change(new_pin=pin)
# check it? kinda, but also get object into normal "logged in" state
pa.setup(pin)
ok = pa.login()
assert ok
# must re-read settings after login, because they are encrypted
# with a key derived from the main secret.
settings.set_key()
settings.load()
except Exception as e:
print("Exception: %s" % e)
# Allow USB protocol, now that we are auth'ed
from usb import enable_usb
enable_usb(loop, False)
from menu import MenuSystem
from flow import EmptyWallet
return MenuSystem(EmptyWallet)
async def block_until_login(*a):
#
# Force user to enter a valid PIN.
#
from login import LoginUX
from main import pa, loop, settings
from ux import AbortInteraction
while not pa.is_successful():
lll = LoginUX()
try:
await lll.try_login()
except AbortInteraction:
# not allowed!
pass
async def pin_changer(_1, _2, item):
# Help them to change pins with appropriate warnings.
# - forcing them to drill-down to get warning about secondary is on purpose
# - the bootloader maybe lying to us about weather we are main vs. duress
# - there is a duress wallet for both main/sec pins, and you need to know main pin for that
# - what may look like just policy here, is in fact enforced by the bootrom code
#
from main import pa, dis
from login import LoginUX
from pincodes import BootloaderError, EPIN_OLD_AUTH_FAIL
mode = item.arg
warn = {
'main':
('Main PIN',
'You will be changing the main PIN used to unlock your Coldcard. '
"It's the one you just used a moment ago to get in here."),
'duress': ('Duress PIN',
'This PIN leads to a bogus wallet. Funds are recoverable '
'from main seed backup, but not as easily.'),
'secondary':
('Second PIN',
'This PIN protects the "secondary" wallet that can be used to '
'segregate funds or other banking purposes. This other wallet is '
'completely independant of the primary.'),
'brickme':
('Brickme PIN',
'Use of this special PIN code at any prompt will destroy the '
'Coldcard completely. It cannot be reused or salvaged, and '
'the secrets it held are destroyed forever.\n\nDO NOT TEST THIS!'),
}
if pa.is_secondary:
# secondary wallet user can only change their own password, and the secondary
# duress pin...
# NOTE: now excluded from menu, but keep
if mode == 'main' or mode == 'brickme':
await needs_primary()
return
if mode == 'duress' and pa.is_secret_blank():
await ux_show_story(
"Please set wallet seed before creating duress wallet.")
return
# are we changing the pin used to login?
is_login_pin = (mode == 'main') or (mode == 'secondary'
and pa.is_secondary)
lll = LoginUX()
lll.offer_second = False
title, msg = warn[mode]
async def incorrect_pin():
await ux_show_story(
'You provided an incorrect value for the existing %s.' % title,
title='Wrong PIN')
return
# standard threats for all PIN's
msg += '''\n\n\
THERE IS ABSOLUTELY NO WAY TO RECOVER A FORGOTTEN PIN! Write it down.
We strongly recommend all PIN codes used be unique between each other.
'''
if not is_login_pin:
msg += '''\nUse 999999-999999 to clear existing PIN.'''
ch = await ux_show_story(msg, title=title)
if ch != 'y': return
args = {}
need_old_pin = True
if is_login_pin:
# Challenge them for old password; certainly had it, because
# we wouldn't be here otherwise.
need_old_pin = True
else:
# There may be no existing PIN, and we need to learn that
if mode == 'secondary':
args['is_secondary'] = True
elif mode == 'duress':
args['is_duress'] = True
elif mode == 'brickme':
args['is_brickme'] = True
old_pin = None
try:
dis.fullscreen("Check...")
pa.change(old_pin=b'', new_pin=b'', **args)
need_old_pin = False
old_pin = '' # converts to bytes below
except BootloaderError as exc:
#print("(not-error) old pin was NOT blank: %s" % exc)
need_old_pin = True
was_blank = not need_old_pin
if need_old_pin:
# We need the existing pin, so prompt for that.
lll.subtitle = 'Old ' + title
old_pin = await lll.prompt_pin()
if old_pin is None:
return await ux_aborted()
args['old_pin'] = old_pin.encode()
# we can verify the main pin right away here. Be nice.
if is_login_pin and args['old_pin'] != pa.pin:
return await incorrect_pin()
while 1:
lll.reset()
lll.subtitle = "New " + title
pin = await lll.get_new_pin(title, allow_clear=True)
if pin is None:
return await ux_aborted()
is_clear = (pin == '999999-999999')
args['new_pin'] = pin.encode() if not is_clear else b''
if args['new_pin'] == pa.pin and not is_login_pin:
await ux_show_story(
"Your new PIN matches the existing PIN used to get here. "
"It would be a bad idea to use it for another purpose.",
title="Try Again")
continue
break
# install it.
dis.fullscreen("Saving...")
try:
pa.change(**args)
except Exception as exc:
code = exc.args[1]
if code == EPIN_OLD_AUTH_FAIL:
# likely: wrong old pin, on anything but main PIN
return await incorrect_pin()
else:
return await ux_show_story("Unexpected low-level error: %s" %
exc.args[0],
title='Error')
# Main pin is changed, and we use it lots, so update pa
# - also to get pa.has_duress_pin() and has_brickme_pin() to be correct, need this
dis.fullscreen("Verify...")
pa.setup(args['new_pin'] if is_login_pin else pa.pin, pa.is_secondary)
if not pa.is_successful():
# typical: do need login, but if we just cleared the main PIN,
# we cannot/need not login again
pa.login()
if mode == 'duress':
# program the duress secret now... it's derived from real wallet
from stash import SensitiveValues, SecretStash, AE_SECRET_LEN
if is_clear:
# clear secret, using the new pin, which is empty string
pa.change(is_duress=True,
new_secret=b'\0' * AE_SECRET_LEN,
old_pin=b'',
new_pin=b'')
else:
with SensitiveValues() as sv:
# derive required key
node = sv.duress_root()
d_secret = SecretStash.encode(xprv=node)
sv.register(d_secret)
# write it out.
pa.change(is_duress=True,
new_secret=d_secret,
old_pin=args['new_pin'])
async def initial_pin_setup(*a):
# First time they select a PIN of any type.
from login import LoginUX
lll = LoginUX()
title = 'Choose PIN'
ch = await ux_show_story('''\
Pick the main wallet's PIN code now. Be more clever, but an example:
123-4567
It has two parts: prefix (123-) and suffix (-4567). \
Each part must between 2 to 6 digits long. Total length \
can be as long as 12 digits.
The prefix part determines the anti-phishing words you will \
see each time you login.
Your new PIN protects access to \
this Coldcard device and is not a factor in the wallet's \
seed words or private keys.
THERE IS ABSOLUTELY NO WAY TO RECOVER A FORGOTTEN PIN! Write it down.
''',
title=title)
if ch != 'y': return
while 1:
ch = await ux_show_story('''\
There is ABSOLUTELY NO WAY to 'reset the PIN' or 'factory reset' the Coldcard if you forget the PIN.
DO NOT FORGET THE PIN CODE.
Press 6 to prove you read to the end of this message.''',
title='WARNING',
escape='6')
if ch == 'x': return
if ch == '6': break
# do the actual picking
pin = await lll.get_new_pin(title)
del lll
if pin is None: return
# A new pin is to be set!
from main import pa, dis, settings, loop
dis.fullscreen("Saving...")
try:
dis.busy_bar(True)
assert pa.is_blank()
pa.change(new_pin=pin)
# check it? kinda, but also get object into normal "logged in" state
pa.setup(pin)
ok = pa.login()
assert ok
# must re-read settings after login, because they are encrypted
# with a key derived from the main secret.
settings.set_key()
settings.load()
except Exception as e:
print("Exception: %s" % e)
finally:
dis.busy_bar(False)
# Allow USB protocol, now that we are auth'ed
from usb import enable_usb
enable_usb(loop, False)
from menu import MenuSystem
from flow import EmptyWallet
return MenuSystem(EmptyWallet)
