def run(receivers, args, find_receiver, _ignore):
assert receivers
if args.receiver:
receiver_name = args.receiver.lower()
receiver = find_receiver(receiver_name)
if not receiver:
raise Exception("no receiver found matching '%s'" % receiver_name)
else:
receiver = receivers[0]
assert receiver
receiver.status = _status.ReceiverStatus(receiver, lambda *args, **kwargs: None)
# check if it's necessary to set the notification flags
old_notification_flags = _hidpp10.get_notification_flags(receiver) or 0
if not (old_notification_flags & _hidpp10.NOTIFICATION_FLAG.wireless):
_hidpp10.set_notification_flags(receiver, old_notification_flags | _hidpp10.NOTIFICATION_FLAG.wireless)
# get all current devices
known_devices = [dev.number for dev in receiver]
class _HandleWithNotificationHook(int):
def notifications_hook(self, n):
assert n
if n.devnumber == 0xFF:
_notifications.process(receiver, n)
elif n.sub_id == 0x41 and n.address == 0x04:
if n.devnumber not in known_devices:
receiver.status.new_device = receiver[n.devnumber]
timeout = 20 # seconds
receiver.handle = _HandleWithNotificationHook(receiver.handle)
receiver.set_lock(False, timeout=timeout)
print ('Pairing: turn your new device on (timing out in', timeout, 'seconds).')
# the lock-open notification may come slightly later, wait for it a bit
pairing_start = _timestamp()
patience = 5 # seconds
while receiver.status.lock_open or _timestamp() - pairing_start < patience:
n = _base.read(receiver.handle)
if n:
n = _base.make_notification(*n)
if n:
receiver.handle.notifications_hook(n)
if not (old_notification_flags & _hidpp10.NOTIFICATION_FLAG.wireless):
# only clear the flags if they weren't set before, otherwise a
# concurrently running Solaar app might stop working properly
_hidpp10.set_notification_flags(receiver, old_notification_flags)
if receiver.status.new_device:
dev = receiver.status.new_device
print ('Paired device %d: %s (%s) [%s:%s]' % (dev.number, dev.name, dev.codename, dev.wpid, dev.serial))
else:
error = receiver.status.get(_status.KEYS.ERROR) or 'no device detected?'
raise Exception("pairing failed: %s" % error)
def pair_device(receiver, args):
# get all current devices
known_devices = [dev.number for dev in receiver]
from logitech_receiver import base, hidpp10, status, notifications
receiver.status = status.ReceiverStatus(receiver, lambda *args, **kwargs: None)
# check if it's necessary to set the notification flags
old_notification_flags = hidpp10.get_notification_flags(receiver) or 0
if not (old_notification_flags & hidpp10.NOTIFICATION_FLAG.wireless):
hidpp10.set_notification_flags(receiver, old_notification_flags | hidpp10.NOTIFICATION_FLAG.wireless)
class HandleWithNotificationHook(int):
def notifications_hook(self, n):
assert n
if n.devnumber == 0xFF:
notifications.process(receiver, n)
elif n.sub_id == 0x41 and n.address == 0x04:
if n.devnumber not in known_devices:
receiver.status.new_device = receiver[n.devnumber]
timeout = 20 # seconds
receiver.handle = HandleWithNotificationHook(receiver.handle)
receiver.set_lock(False, timeout=timeout)
print ("Pairing: turn your new device on (timing out in", timeout, "seconds).")
# the lock-open notification may come slightly later, wait for it a bit
from time import time as timestamp
pairing_start = timestamp()
patience = 5 # seconds
while receiver.status.lock_open or timestamp() - pairing_start < patience:
n = base.read(receiver.handle)
if n:
n = base.make_notification(*n)
if n:
receiver.handle.notifications_hook(n)
if not (old_notification_flags & hidpp10.NOTIFICATION_FLAG.wireless):
# only clear the flags if they weren't set before, otherwise a
# concurrently running Solaar app might stop working properly
hidpp10.set_notification_flags(receiver, old_notification_flags)
if receiver.status.new_device:
dev = receiver.status.new_device
print ("Paired device %d: %s [%s:%s:%s]" % (dev.number, dev.name, dev.wpid, dev.codename, dev.serial))
else:
error = receiver.status[status.KEYS.ERROR] or 'no device detected?'
_fail(error)
def run(receivers, args, find_receiver, _ignore):
assert receivers
if args.receiver:
receiver_name = args.receiver.lower()
receiver = find_receiver(receivers, receiver_name)
if not receiver:
raise Exception("no receiver found matching '%s'" % receiver_name)
else:
receiver = receivers[0]
assert receiver
receiver.status = _status.ReceiverStatus(receiver,
lambda *args, **kwargs: None)
# check if it's necessary to set the notification flags
old_notification_flags = _hidpp10.get_notification_flags(receiver) or 0
if not (old_notification_flags & _hidpp10.NOTIFICATION_FLAG.wireless):
_hidpp10.set_notification_flags(
receiver,
old_notification_flags | _hidpp10.NOTIFICATION_FLAG.wireless)
# get all current devices
known_devices = [dev.number for dev in receiver]
class _HandleWithNotificationHook(int):
def notifications_hook(self, n):
nonlocal known_devices
assert n
if n.devnumber == 0xFF:
_notifications.process(receiver, n)
elif n.sub_id == 0x41 and len(
n.data) == _base._SHORT_MESSAGE_SIZE - 4:
kd, known_devices = known_devices, None # only process one connection notification
if kd is not None:
if n.devnumber not in kd:
receiver.status.new_device = receiver.register_new_device(
n.devnumber, n)
elif receiver.re_pairs:
del receiver[
n.
devnumber] # get rid of information on device re-paired away
receiver.status.new_device = receiver.register_new_device(
n.devnumber, n)
timeout = 30 # seconds
receiver.handle = _HandleWithNotificationHook(receiver.handle)
if receiver.receiver_kind == 'bolt': # Bolt receivers require authentication to pair a device
receiver.discover(timeout=timeout)
print(
'Bolt Pairing: long-press the pairing key or button on your device (timing out in',
timeout, 'seconds).')
pairing_start = _timestamp()
patience = 5 # the discovering notification may come slightly later, so be patient
while receiver.status.discovering or _timestamp(
) - pairing_start < patience:
if receiver.status.device_address and receiver.status.device_authentication and receiver.status.device_name:
break
n = _base.read(receiver.handle)
n = _base.make_notification(*n) if n else None
if n:
receiver.handle.notifications_hook(n)
address = receiver.status.device_address
name = receiver.status.device_name
authentication = receiver.status.device_authentication
kind = receiver.status.device_kind
print(f'Bolt Pairing: discovered {name}')
receiver.pair_device(
address=address,
authentication=authentication,
entropy=20 if kind == _hidpp10.DEVICE_KIND.keyboard else 10)
pairing_start = _timestamp()
patience = 5 # the discovering notification may come slightly later, so be patient
while receiver.status.lock_open or _timestamp(
) - pairing_start < patience:
if receiver.status.device_passkey:
break
n = _base.read(receiver.handle)
n = _base.make_notification(*n) if n else None
if n:
receiver.handle.notifications_hook(n)
if authentication & 0x01:
print(
f'Bolt Pairing: type passkey {receiver.status.device_passkey} and then press the enter key'
)
else:
passkey = f'{int(receiver.status.device_passkey):010b}'
passkey = ', '.join(
['right' if bit == '1' else 'left' for bit in passkey])
print(f'Bolt Pairing: press {passkey}')
print('and then press left and right buttons simultaneously')
while receiver.status.lock_open:
n = _base.read(receiver.handle)
n = _base.make_notification(*n) if n else None
if n:
receiver.handle.notifications_hook(n)
else:
receiver.set_lock(False, timeout=timeout)
print('Pairing: turn your new device on (timing out in', timeout,
'seconds).')
pairing_start = _timestamp()
patience = 5 # the lock-open notification may come slightly later, wait for it a bit
while receiver.status.lock_open or _timestamp(
) - pairing_start < patience:
n = _base.read(receiver.handle)
if n:
n = _base.make_notification(*n)
if n:
receiver.handle.notifications_hook(n)
if not (old_notification_flags & _hidpp10.NOTIFICATION_FLAG.wireless):
# only clear the flags if they weren't set before, otherwise a
# concurrently running Solaar app might stop working properly
_hidpp10.set_notification_flags(receiver, old_notification_flags)
if receiver.status.new_device:
dev = receiver.status.new_device
print('Paired device %d: %s (%s) [%s:%s]' %
(dev.number, dev.name, dev.codename, dev.wpid, dev.serial))
else:
error = receiver.status.get(_status.KEYS.ERROR)
if error:
raise Exception('pairing failed: %s' % error)
else:
print('Paired device') # this is better than an error