Ejemplo n.º 1
0
def _publish_local_config(configpath, pre_lines, exports):
    tmp_path = '%s.tmp.%s' % (configpath, time.time())
    LOG.debug("tmp_path = %s", tmp_path)
    cpcmd = ['install', '-m', '666', configpath, tmp_path]
    try:
        utils.execute(*cpcmd, run_as_root=True)
    except exception.ProcessExecutionError as e:
        msg = (_('Failed while publishing ganesha config locally. '
                 'Error: %s.') % six.text_type(e))
        LOG.error(msg)
        raise exception.GPFSGaneshaException(msg)

    with open(tmp_path, 'w+') as f:
        for l in pre_lines:
            f.write('%s\n' % l)
        for e in exports:
            f.write('EXPORT\n{\n')
            for attr in exports[e]:
                f.write('%s = %s ;\n' % (attr, exports[e][attr]))

            f.write('}\n')
    mvcmd = ['mv', tmp_path, configpath]
    try:
        utils.execute(*mvcmd, run_as_root=True)
    except exception.ProcessExecutionError as e:
        msg = (_('Failed while publishing ganesha config locally. '
                 'Error: %s.') % six.text_type(e))
        LOG.error(msg)
        raise exception.GPFSGaneshaException(msg)
    LOG.info(_LI('Ganesha config %s published locally.'), configpath)
Ejemplo n.º 2
0
def reload_ganesha_config(servers, sshlogin, service='ganesha.nfsd'):
    """Request ganesha server reload updated config."""

    # Note:  dynamic reload of ganesha config is not enabled
    # in ganesha v2.0. Therefore, the code uses the ganesha service restart
    # option to make sure the config changes are reloaded
    for server in servers:
        # Until reload is fully implemented and if the reload returns a bad
        # status revert to service restart instead
        LOG.info(_LI('Restart service %(service)s on %(server)s to force a '
                     'config file reload'),
                 {'service': service, 'server': server})
        run_local = True

        reload_cmd = ['service', service, 'restart']
        localserver_iplist = socket.gethostbyname_ex(
            socket.gethostname())[2]
        if server not in localserver_iplist:
            remote_login = sshlogin + '@' + server
            reload_cmd = ['ssh', remote_login] + reload_cmd
            run_local = False
        try:
            utils.execute(*reload_cmd, run_as_root=run_local)
        except exception.ProcessExecutionError as e:
            msg = (_('Could not restart service %(service)s on '
                     '%(server)s: %(excmsg)s')
                   % {'service': service,
                      'server': server,
                      'excmsg': six.text_type(e)})
            LOG.error(msg)
            raise exception.GPFSGaneshaException(msg)
Ejemplo n.º 3
0
def _publish_local_config(configpath, pre_lines, exports):
    tmp_path = '%s.tmp.%s' % (configpath, time.time())
    LOG.debug("tmp_path = %s", tmp_path)
    cpcmd = ['cp', configpath, tmp_path]
    try:
        utils.execute(*cpcmd, run_as_root=True)
    except exception.ProcessExecutionError as e:
        msg = (_('Failed while publishing ganesha config locally. '
                 'Error: %s.'), six.text_type(e))
        LOG.error(msg)
        raise exception.GPFSGaneshaException(msg)

    # change permission of the tmp file, so that it can be edited
    # by a non-root user
    chmodcmd = ['chmod', 'o+w', tmp_path]
    try:
        utils.execute(*chmodcmd, run_as_root=True)
    except exception.ProcessExecutionError as e:
        msg = (_('Failed while publishing ganesha config locally. '
                 'Error: %s.'), six.text_type(e))
        LOG.error(msg)
        raise exception.GPFSGaneshaException(msg)

    with open(tmp_path, 'w+') as f:
        for l in pre_lines:
            f.write('%s\n' % l)
        for e in exports:
            f.write('EXPORT\n{\n')
            for attr in exports[e]:
                f.write('%s = %s ;\n' % (attr, exports[e][attr]))

            f.write('}\n')
    mvcmd = ['mv', tmp_path, configpath]
    try:
        utils.execute(*mvcmd, run_as_root=True)
    except exception.ProcessExecutionError as e:
        msg = (_('Failed while publishing ganesha config locally.'
                 'Error: %s.'), six.text_type(e))
        LOG.error(msg)
        raise exception.GPFSGaneshaException(msg)
    LOG.info(_LI('Ganesha config %s published locally.'), configpath)
Ejemplo n.º 4
0
def _convert_ipstring_to_ipn(ipstring):
    """Transform a single ip string into a list of IPNetwork objects."""
    if netaddr.valid_glob(ipstring):
        ipns = netaddr.glob_to_cidrs(ipstring)
    else:
        try:
            ipns = [netaddr.IPNetwork(ipstring)]
        except netaddr.AddrFormatError:
            msg = (_('Invalid IP access string %s.') % ipstring)
            LOG.error(msg)
            raise exception.GPFSGaneshaException(msg)
    return ipns
Ejemplo n.º 5
0
def _publish_remote_config(server, sshlogin, sshkey, configpath):
    dest = '%s@%s:%s' % (sshlogin, server, configpath)
    scpcmd = ['scp', '-i', sshkey, configpath, dest]
    try:
        utils.execute(*scpcmd, run_as_root=False)
    except exception.ProcessExecutionError as e:
        msg = (_('Failed while publishing ganesha config on remote server. '
                 'Error: %s.') % six.text_type(e))
        LOG.error(msg)
        raise exception.GPFSGaneshaException(msg)
    LOG.info(_LI('Ganesha config %(path)s published to %(server)s.'),
             {'path': configpath,
              'server': server})
Ejemplo n.º 6
0
def parse_ganesha_config(configpath):
    """Parse the specified ganesha configuration.

    Parse a configuration file and return a list of lines that were found
    before the first EXPORT block, and a dictionary of exports and their
    attributes.

    The input configuration file should be a valid ganesha config file and the
    export blocks should be the last items in the file.
    :returns: pre_lines -- List of lines, before the exports clause begins
              exports -- Dict of exports, indexed with the 'export_id'

    Hers is a sample output:

    pre_lines =
    [   '###################################################',
        '#     Export entries',
        '###################################################',
        '',
        '',
        '# First export entry']

    exports =
    {   '100': {   'anonymous_root_uid': '-2',
                   'export_id': '100',
                   'filesystem_id': '192.168',
                   'fsal': '"GPFS"',
                   'maxread': '65536',
                   'maxwrite': '65536',
                   'nfs_protocols': '"3,4"',
                   'path': '"/gpfs0/share-0d7df0c0-4792-4e2a-68dc7206a164"',
                   'prefread': '65536',
                   'prefwrite': '65536',
                   'pseudo': '"/gpfs0/share-0d7df0c0-4792-4e2a-68dc7206a164"',
                   'root_access': '"*"',
                   'rw_access': '""',
                   'sectype': '"sys"',
                   'tag': '"fs100"',
                   'transport_protocols': '"UDP,TCP"'},
        '101': {   'anonymous_root_uid': '-2',
                   'export_id': '101',
                   'filesystem_id': '192.168',
                   'fsal': '"GPFS"',
                   'maxread': '65536',
                   'maxwrite': '65536',
                   'nfs_protocols': '"3,4"',
                   'path': '"/gpfs0/share-74bee4dc-e07a-44a9-4be619a13fb1"',
                   'prefread': '65536',
                   'prefwrite': '65536',
                   'pseudo': '"/gpfs0/share-74bee4dc-e07a-44a9-4be619a13fb1"',
                   'root_access': '"*"',
                   'rw_access': '"172.24.4.4"',
                   'sectype': '"sys"',
                   'tag': '"fs101"',
                   'transport_protocols': '"UDP,TCP"'}}
    """
    export_count = 0
    exports = dict()
    pre_lines = []
    with open(configpath) as f:
        for l in f.readlines():
            line = l.strip()
            if export_count == 0 and line != 'EXPORT':
                pre_lines.append(line)
            else:
                if line == 'EXPORT':
                    export_count += 1
                    expattrs = dict()
                try:
                    match_obj = AVPATTERN.match(line)
                    attr = match_obj.group('attr').lower()
                    val = match_obj.group('val')
                    expattrs[attr] = val
                    if attr == 'export_id':
                        exports[val] = expattrs
                except AttributeError:
                    pass

    if export_count != len(exports):
        msg = (_('Invalid export config file %(configpath)s: '
                 '%(exports)s export clauses found, but '
                 '%(export_ids)s export_ids.')
               % {"configpath": configpath,
                  "exports": str(export_count),
                  "export_ids": str(len(exports))})

        LOG.error(msg)
        raise exception.GPFSGaneshaException(msg)
    return pre_lines, exports