def test_05_stop_start_vm_with_multiple_nic(self):
""" Stop and Start a VM with Multple NIC
Steps:
# 1) Create a Vm with multiple NIC's
# 2) Configure secondary IP's on the VM
# 3) Try to stop/start the VM
# 4) Ping the IP's of the vm
# 5) Remove Secondary IP from one of the NIC
:return:
"""
ipaddress1 = NIC.addIp(self.apiclient,
id=self.virtual_machine2.nic[0].id)
ipaddress2 = NIC.addIp(self.apiclient,
id=self.virtual_machine2.nic[1].id)
# Stop the VM with multiple NIC's
self.virtual_machine2.stop(self.apiclient)
virtual_machine = VirtualMachine.list(self.apiclient,
id=self.virtual_machine2.id)
self.assertEqual(virtual_machine[0]['state'], 'Stopped',
"Could not stop the VM with multiple NIC's")
if virtual_machine[0]['state'] == 'Stopped':
# If stopped then try to start the VM
self.virtual_machine2.start(self.apiclient)
virtual_machine = VirtualMachine.list(self.apiclient,
id=self.virtual_machine2.id)
self.assertEqual(virtual_machine[0]['state'], 'Running',
"Could not start the VM with multiple NIC's")
self.verify_network_rules(self.virtual_machine2.id)
def test_07_remove_secondary_ip_from_nic(self):
""" Remove secondary IP from any NIC
Steps:
# 1) Navigate to Instances
# 2) Select any vm
# 3) NIC's ->Edit secondary IP's->Release IP
# 4) The secondary IP should be successfully removed
"""
virtual_machine = VirtualMachine.list(
self.apiclient,
id=self.virtual_machine2.id)
# Check which NIC is having secondary IP
secondary_ips = virtual_machine[0].nic[1].secondaryip
for secondary_ip in secondary_ips:
NIC.removeIp(self.apiclient, ipaddressid=secondary_ip['id'])
virtual_machine = VirtualMachine.list(
self.apiclient,
id=self.virtual_machine2.id
)
self.assertFalse(
virtual_machine[0].nic[1].secondaryip,
'Failed to remove secondary IP')
self.verify_network_rules(self.virtual_machine2.id)
def test_04_add_ip_to_remaining_nics(self):
""" Add secondary IP's to remaining NIC's
Steps:
# 1) Create a VM with more than 1 NIC
# 2)Navigate to Instances-NIC's->Edit Secondary IP's
# ->Acquire new Secondary IP
# 3) Add secondary IP to all the NIC's of the VM
# 4) Confiugre the secondary IP's by referring to "Configure the
# secondary IP's" in the "Action Item" section
:return:
"""
self.virtual_machine1.add_nic(self.apiclient, self.network3.id)
vms = VirtualMachine.list(self.apiclient, id=self.virtual_machine1.id)
self.assertIsNotNone(vms[0].nic[2],
"Third NIC is not added successfully to the VM")
vms1_nic1_id = vms[0].nic[1]['id']
vms1_nic2_id = vms[0].nic[2]['id']
ipaddress21 = NIC.addIp(self.apiclient, id=vms1_nic1_id)
ipaddress22 = NIC.addIp(self.apiclient, id=vms1_nic1_id)
self.assertIsNotNone(
ipaddress21, "Unable to add first secondary IP to the second nic")
self.assertIsNotNone(
ipaddress22, "Unable to add second secondary IP to second NIC")
ipaddress31 = NIC.addIp(self.apiclient, id=vms1_nic2_id)
ipaddress32 = NIC.addIp(self.apiclient, id=vms1_nic2_id)
self.assertIsNotNone(ipaddress31,
"Unable to add first secondary IP to third NIC")
self.assertIsNotNone(ipaddress32,
"Unable to add second secondary IP to third NIC")
self.verify_network_rules(self.virtual_machine1.id)
def test_validateState_succeeds_before_retry_limit(self):
retries = 2
timeout = 3
api_client = MockApiClient(retries, 'initial state', 'final state')
vm = VirtualMachine(
{
'id': 'vm_id',
'nic': [NIC({'ipaddress': '192.168.0.100'})]
}, {})
state = vm.validateState(api_client,
'final state',
timeout=timeout,
interval=1)
self.assertEqual(state, [PASS, None])
self.assertEqual(retries, api_client.retry_counter)
def test_03_add_ip_to_default_nic(self):
""" Add secondary IP's to the VM
Steps:
# 1. Create a VM with more than 1 NIC
# 2) Navigate to Instances->NIC->Edit Secondary IP's
# ->Aquire new Secondary IP"
# 3) Add as many secondary Ip as possible to the VM
# 4) Configure the secondary IP's by referring to "Configure
# the secondary IP's" in the "Action Item" section
:return:
"""
ipaddress = NIC.addIp(self.apiclient,
id=self.virtual_machine2.nic[0].id)
self.assertIsNotNone(ipaddress,
"Unable to add secondary IP to the default NIC")
self.verify_network_rules(self.virtual_machine2.id)
def test_validateState_fails_after_retry_limit(self):
retries = 3
timeout = 2
api_client = MockApiClient(retries, 'initial state', 'final state')
vm = VirtualMachine(
{
'id': 'vm_id',
'nic': [NIC({'ipaddress': '192.168.0.100'})]
}, {})
state = vm.validateState(api_client,
'final state',
timeout=timeout,
interval=1)
self.assertEqual(state, [
FAIL,
'VirtualMachine state not trasited to final state, operation timed out'
])
self.assertEqual(retries, api_client.retry_counter)
def checkIpv6NetworkVm(self):
self.debug("Listing NICS for VM %s in network: %s" % (self.virtual_machine.name, self.network.name))
nics = NIC.list(
self.apiclient,
virtualmachineid=self.virtual_machine.id,
networkid=self.network.id
)
self.assertEqual(
len(nics),
1,
"Router for the network isn't found"
)
nic = nics[0]
self.assertNotEqual(nic.ip6address,
None,
"IPv6 address for VM %s NIC is empty" % nic.traffictype)
self.virtual_machine_ipv6_address = nic.ip6address
self.assertNotEqual(nic.ip6cidr,
None,
"IPv6 CIDR for VM %s NIC is empty" % nic.traffictype)
self.assertNotEqual(nic.ip6gateway,
None,
"IPv6 gateway for VM %s NIC is empty" % nic.traffictype)
def test_updating_nics_on_two_shared_networks(self):
"""
Test updating vm nics on two shared networks
Works as follows:
- Create two shared networks, with different IP ranges (eg network1, network2).
- Create two VMs on each shared network (eg vm1 on network1, vm2 on network2) and stop them.
- Add additional IP range to each shared network. The two additional IP ranges have same start IP and end IP,
but different gateway and netmask (eg network1-iprange2, network2-iprange2).
- Update IP address of the two vms, by specifying new IP address on additional IP ranges. The new gateway and
netmask should be updated correctly (eg vm1 on network1-iprange2, vm2 on network2-iprange2).
"""
# - Create two shared networks, with different IP ranges (eg network1, network2).
self.services["shared_network"]["netmask"] = "255.255.255.0"
self.services["shared_network"]["gateway"] = "192.168.1.1"
self.services["shared_network"]["startip"] = "192.168.1.2"
self.services["shared_network"]["endip"] = "192.168.1.20"
self.services["shared_network"]["vlan"] = "111"
testnet = self.services["shared_network"]
self.debug(f"========= network 1 : {testnet}")
self.network1 = Network.create(
self.apiclient,
self.services["shared_network"],
networkofferingid=self.shared_network_offering.id,
zoneid=self.zone.id,
)
self._cleanup.append(self.network1)
self.services["shared_network"]["netmask"] = "255.255.255.0"
self.services["shared_network"]["gateway"] = "192.168.2.1"
self.services["shared_network"]["startip"] = "192.168.2.2"
self.services["shared_network"]["endip"] = "192.168.2.20"
self.services["shared_network"]["vlan"] = "222"
self.network2 = Network.create(
self.apiclient,
self.services["shared_network"],
networkofferingid=self.shared_network_offering.id,
zoneid=self.zone.id,
)
self._cleanup.append(self.network2)
# - Create two VMs on each shared network (eg vm1 on network1, vm2 on network2) and stop them.
vm_data = self.services["virtual_machine"]
self.debug(f"============virtual machine data : {vm_data}")
virtual_machine1 = VirtualMachine.create(
self.apiclient,
self.services["virtual_machine"],
templateid=self.template.id,
serviceofferingid=self.service_offering.id,
networkids=[self.network1.id],
zoneid=self.zone.id)
self.cleanup.append(virtual_machine1)
virtual_machine1.stop(self.apiclient)
virtual_machine2 = VirtualMachine.create(
self.apiclient,
self.services["virtual_machine"],
templateid=self.template.id,
serviceofferingid=self.service_offering.id,
networkids=[self.network2.id],
zoneid=self.zone.id)
self.cleanup.append(virtual_machine2)
virtual_machine2.stop(self.apiclient)
# - Add additional IP range to each shared network. The two additional IP ranges have same start IP and end IP,
# but different gateway and netmask (eg network1-iprange2, network2-iprange2).
self.services["vlan_ip_range"]["netmask"] = "255.255.255.224"
self.services["vlan_ip_range"]["gateway"] = "192.168.3.1"
self.services["vlan_ip_range"]["startip"] = "192.168.3.2"
self.services["vlan_ip_range"]["endip"] = "192.168.3.20"
self.services["vlan_ip_range"]["vlan"] = "111"
range1 = PublicIpRange.create(self.apiclient,
self.services["vlan_ip_range"],
networkid=self.network1.id)
self.debug(f"============range 1 : {range1}")
self.services["vlan_ip_range"]["netmask"] = "255.255.255.192"
self.services["vlan_ip_range"]["gateway"] = "192.168.3.21"
self.services["vlan_ip_range"]["startip"] = "192.168.3.2"
self.services["vlan_ip_range"]["endip"] = "192.168.3.20"
self.services["vlan_ip_range"]["vlan"] = "222"
range2 = PublicIpRange.create(self.apiclient,
self.services["vlan_ip_range"],
networkid=self.network2.id)
# - Update IP address of the two vms, by specifying new IP address on additional IP ranges. The new gateway and
# netmask should be updated correctly (eg vm1 on network1-iprange2, vm2 on network2-iprange2).
nic1id = NIC.list(self.apiclient,
virtualmachineid=virtual_machine1.id,
networkid=self.network1.id)[0].id
NIC.updateIp(self.apiclient, id=nic1id, ipaddress="192.168.3.2")
nics = NIC.list(self.apiclient,
virtualmachineid=virtual_machine1.id,
networkid=self.network1.id)
self.check_nic(nics, self.network1, range1)
nic2id = NIC.list(self.apiclient,
virtualmachineid=virtual_machine2.id,
networkid=self.network2.id)[0].id
NIC.updateIp(self.apiclient, id=nic2id, ipaddress="192.168.3.2")
nics = NIC.list(self.apiclient,
virtualmachineid=virtual_machine2.id,
networkid=self.network2.id)
self.check_nic(nics, self.network2, range2)
return
