def modules_goto_bootloader():
""" Reset the module to go to the bootloader. """
return MasterCommandSpec("FR",
[Field.str('addr', 4), Field.byte('sec'), Field.lit('C'), Field.byte('crc0'),
Field.byte('crc1'), Field.padding(5)],
[Field.str('addr', 4), Field.byte("error_code"), Field.lit('C'), Field.byte('crc0'),
Field.byte('crc1'), Field.padding(5), Field.lit("\r\n")])
def modules_goto_application():
""" Let the module go to application. """
return MasterCommandSpec("FG",
[Field.str('addr', 4), Field.lit('C'), Field.byte('crc0'), Field.byte('crc1'),
Field.padding(6)],
[Field.str('addr', 4), Field.byte("error_code"), Field.lit('C'), Field.byte('crc0'),
Field.byte('crc1'), Field.padding(5), Field.lit("\r\n")])
def modules_integrity_check():
""" Check the integrity of the new code. """
return MasterCommandSpec("FE",
[Field.str('addr', 4), Field.lit('C'), Field.byte('crc0'), Field.byte('crc1'),
Field.padding(6)],
[Field.str('addr', 4), Field.byte("error_code"), Field.lit('C'), Field.byte('crc0'),
Field.byte('crc1'), Field.padding(5), Field.lit("\r\n")])
def modules_new_firmware_version():
""" Preprare the slave module for a new version. """
return MasterCommandSpec("FN",
[Field.str('addr', 4), Field.byte("f1n"), Field.byte("f2n"), Field.byte("f3n"),
Field.lit('C'), Field.byte('crc0'), Field.byte('crc1'), Field.padding(3)],
[Field.str('addr', 4), Field.byte("error_code"), Field.lit('C'), Field.byte('crc0'),
Field.byte('crc1'), Field.padding(5), Field.lit("\r\n")])
def read_setpoint():
""" Read the programmed setpoint of a thermostat """
return MasterCommandSpec("rs",
[Field.byte('thermostat'), Field.padding(12)],
[Field.byte('thermostat'), Field.svt('act'), Field.svt('csetp'), Field.svt('psetp0'),
Field.svt('psetp1'), Field.svt('psetp2'), Field.svt('psetp3'), Field.svt('psetp4'),
Field.svt('psetp5'), Field.byte('sensor_nr'), Field.byte('output0_nr'),
Field.byte('output1_nr'), Field.byte('output0'), Field.byte('output1'),
Field.svt('outside'), Field.byte('mode'), Field.str('name', 16), Field.byte('pid_p'),
Field.byte('pid_i'), Field.byte('pid_d'), Field.byte('pid_ithresh'),
Field.svt('threshold_temp'), Field.byte('days'), Field.byte('hours'),
Field.byte('minutes'), Field.svt('mon_start_d1'), Field.svt('mon_stop_d1'),
Field.svt('mon_start_d2'), Field.svt('mon_stop_d2'), Field.svt('tue_start_d1'),
Field.svt('tue_stop_d1'), Field.svt('tue_start_d2'), Field.svt('tue_stop_d2'),
Field.svt('wed_start_d1'), Field.svt('wed_stop_d1'), Field.svt('wed_start_d2'),
Field.svt('wed_stop_d2'), Field.svt('thu_start_d1'), Field.svt('thu_stop_d1'),
Field.svt('thu_start_d2'), Field.svt('thu_stop_d2'), Field.svt('fri_start_d1'),
Field.svt('fri_stop_d1'), Field.svt('fri_start_d2'), Field.svt('fri_stop_d2'),
Field.svt('sat_start_d1'), Field.svt('sat_stop_d1'), Field.svt('sat_start_d2'),
Field.svt('sat_stop_d2'), Field.svt('sun_start_d1'), Field.svt('sun_stop_d1'),
Field.svt('sun_start_d2'), Field.svt('sun_stop_d2'), Field.lit('T'),
Field.svt('mon_temp_d1'), Field.svt('tue_temp_d1'), Field.svt('wed_temp_d1'),
Field.svt('thu_temp_d1'), Field.svt('fri_temp_d1'), Field.svt('sat_temp_d1'),
Field.svt('sun_temp_d1'), Field.svt('mon_temp_d2'), Field.svt('tue_temp_d2'),
Field.svt('wed_temp_d2'), Field.svt('thu_temp_d2'), Field.svt('fri_temp_d2'),
Field.svt('sat_temp_d2'), Field.svt('sun_temp_d2'), Field.svt('mon_temp_n'),
Field.svt('tue_temp_n'), Field.svt('wed_temp_n'), Field.svt('thu_temp_n'),
Field.svt('fri_temp_n'), Field.svt('sat_temp_n'), Field.svt('sun_temp_n'),
Field.crc(), Field.lit('\r\n')])
def modules_update_firmware_block():
""" Upload 1 block of 64 bytes to the module. """
return MasterCommandSpec("FD",
[Field.str('addr', 4), Field.int("block"), Field.str("bytes", 64),
Field.lit('C'), Field.byte('crc0'), Field.byte('crc1')],
[Field.str('addr', 4), Field.byte("error_code"), Field.lit('C'), Field.byte('crc0'),
Field.byte('crc1'), Field.lit("\r\n")])
def modules_new_crc():
""" Write the new crc code to the bootloaded module. """
return MasterCommandSpec("FC",
[Field.str('addr', 4), Field.byte("ccrc0"), Field.byte("ccrc1"), Field.byte("ccrc2"),
Field.byte("ccrc3"), Field.lit('C'), Field.byte('crc0'), Field.byte('crc1'),
Field.padding(2)],
[Field.str('addr', 4), Field.byte("error_code"), Field.lit('C'), Field.byte('crc0'),
Field.byte('crc1'), Field.padding(5), Field.lit("\r\n")])
def modules_get_version():
""" Get the version of the module. """
return MasterCommandSpec("FV",
[Field.str('addr', 4), Field.lit('C'), Field.byte('crc0'), Field.byte('crc1'),
Field.padding(6)],
[Field.str('addr', 4), Field.byte("error_code"), Field.byte("hw_version"),
Field.byte("f1"), Field.byte("f2"), Field.byte("f3"), Field.byte("status"),
Field.lit('C'), Field.byte('crc0'), Field.byte('crc1'), Field.lit("\r\n")])
def change_communication_mode_to_short():
""" Change the number of bytes used to communicate with the master to 18. """
return MasterCommandSpec(
"cm", [Field.lit('\x12'),
Field.lit('\x01'),
Field.padding(71)], [
Field.lit('\x12'),
Field.lit('\x01'),
Field.padding(11),
Field.lit("\r\n")
])
def input_list(master_version):
""" The message sent by the master whenever an input changes. """
if master_version < (3, 143, 88):
return MasterCommandSpec(
"IL", [],
[Field.byte('input'),
Field.byte('output'),
Field.lit("\r\n")])
return MasterCommandSpec("IL", [], [
Field.byte('input'),
Field.byte('output'),
Field.byte('status'),
Field.lit("\r\n")
])
def module_discover_start():
""" Put the master in module discovery mode. """
return MasterCommandSpec(
"DA", [Field.padding(13)],
[Field.str("resp", 2),
Field.padding(11),
Field.lit("\r\n")])
def reset():
""" Reset the gateway, used for firmware updates. """
return MasterCommandSpec(
"re", [Field.padding(13)],
[Field.str("resp", 2),
Field.padding(11),
Field.lit("\r\n")])
def eeprom_list():
""" List all bytes from a certain eeprom bank """
return MasterCommandSpec(
"EL", [Field.byte("bank"), Field.padding(12)],
[Field.byte("bank"),
Field.str("data", 256),
Field.lit("\r\n")])
def event_triggered():
""" The message sent by the master to trigger an event. This event is triggered by basic
action 60. """
return MasterCommandSpec(
"EV", [], [Field.byte('code'),
Field.padding(12),
Field.lit('\r\n')])
def set_virtual_sensor():
""" Set the values (temperature, humidity, brightness) of a virtual sensor. """
return MasterCommandSpec("VS",
[Field.byte('sensor'), Field.svt('tmp'), Field.svt('hum'), Field.svt('bri'),
Field.padding(9)],
[Field.byte('sensor'), Field.svt('tmp'), Field.svt('hum'), Field.svt('bri'),
Field.padding(9), Field.lit('\r\n')])
def module_discover_stop():
""" Put the master into the normal working state. """
return MasterCommandSpec(
"DO", [Field.padding(13)],
[Field.str("resp", 2),
Field.padding(11),
Field.lit("\r\n")])
def thermostat_mode():
""" Read the current thermostat mode """
return MasterCommandSpec(
"TM", [Field.padding(13)],
[Field.byte('mode'),
Field.padding(12),
Field.lit('\r\n')])
def clear_error_list():
""" Clear the number of errors. """
return MasterCommandSpec(
"ec", [Field.padding(13)],
[Field.str("resp", 2),
Field.padding(11),
Field.lit("\r\n")])
def error_list():
""" Get the number of errors for each input and output module. """
return MasterCommandSpec("el", [Field.padding(13)], [
Field("errors", ErrorListFieldType()),
Field.crc(),
Field.lit("\r\n")
])
def pulse_list():
""" List the pulse counter values. """
return MasterCommandSpec("PL", [Field.padding(13)], [
Field.int('pv0'),
Field.int('pv1'),
Field.int('pv2'),
Field.int('pv3'),
Field.int('pv4'),
Field.int('pv5'),
Field.int('pv6'),
Field.int('pv7'),
Field.int('pv8'),
Field.int('pv9'),
Field.int('pv10'),
Field.int('pv11'),
Field.int('pv12'),
Field.int('pv13'),
Field.int('pv14'),
Field.int('pv15'),
Field.int('pv16'),
Field.int('pv17'),
Field.int('pv18'),
Field.int('pv19'),
Field.int('pv20'),
Field.int('pv21'),
Field.int('pv22'),
Field.int('pv23'),
Field.crc(),
Field.lit('\r\n')
])
def input_list():
""" The message sent by the master whenever an input is enabled. """
return MasterCommandSpec(
"IL", [],
[Field.byte('input'),
Field.byte('output'),
Field.lit("\r\n")])
def add_virtual_module():
""" Adds a virtual module """
return MasterCommandSpec(
"AV", [Field.str('vmt', 1), Field.padding(12)],
[Field.str("resp", 2),
Field.padding(11),
Field.lit('\r\n')])
def status():
""" Get the status of the master. """
return MasterCommandSpec("ST",
[Field.padding(13)],
[Field.byte('seconds'), Field.byte('minutes'), Field.byte('hours'), Field.byte('weekday'),
Field.byte('day'), Field.byte('month'), Field.byte('year'), Field.lit('\x00'),
Field.byte('mode'), Field.byte('f1'), Field.byte('f2'), Field.byte('f3'),
Field.byte('h'), Field.lit('\r\n')])
def temperature_list():
""" Read the temperature thermostat sensor list for a series of 12 sensors """
return MasterCommandSpec("TL",
[Field.byte("series"), Field.padding(12)],
[Field.byte("series"), Field.svt('tmp0'), Field.svt('tmp1'), Field.svt('tmp2'),
Field.svt('tmp3'), Field.svt('tmp4'), Field.svt('tmp5'), Field.svt('tmp6'),
Field.svt('tmp7'), Field.svt('tmp8'), Field.svt('tmp9'), Field.svt('tmp10'),
Field.svt('tmp11'), Field.lit('\r\n')])
def set_time():
""" Set the time on the master. """
return MasterCommandSpec("st",
[Field.byte('sec'), Field.byte('min'), Field.byte('hours'), Field.byte('weekday'),
Field.byte('day'), Field.byte('month'), Field.byte('year'), Field.padding(6)],
[Field.byte('sec'), Field.byte('min'), Field.byte('hours'), Field.byte('weekday'),
Field.byte('day'), Field.byte('month'), Field.byte('year'), Field.padding(6),
Field.lit("\r\n")])
def setpoint_list():
""" Read the current setpoint of the thermostats in series of 12 """
return MasterCommandSpec("SL",
[Field.byte("series"), Field.padding(12)],
[Field.byte("series"), Field.svt('tmp0'), Field.svt('tmp1'), Field.svt('tmp2'),
Field.svt('tmp3'), Field.svt('tmp4'), Field.svt('tmp5'), Field.svt('tmp6'),
Field.svt('tmp7'), Field.svt('tmp8'), Field.svt('tmp9'), Field.svt('tmp10'),
Field.svt('tmp11'), Field.lit('\r\n')])
def read_input_module(master_version):
""" Read the status about all inputs of an input module """
if master_version < (3, 143, 88):
raise NotImplementedError("read_input_module() not supported on master version {}".format(master_version))
return MasterCommandSpec("RI",
[Field.byte("input_module_nr"), Field.padding(12)],
[Field.byte('input_module_nr'), Field.byte('input_status'), Field.padding(8),
Field.crc(), Field.lit('\r\n')])
def indicate():
""" Flash the led for a given output/input/sensor. """
return MasterCommandSpec(
"IN", [Field.byte('type'),
Field.byte('id'),
Field.padding(11)],
[Field.str("resp", 2),
Field.padding(11),
Field.lit("\r\n")])
def read_output():
""" Read the information about an output """
return MasterCommandSpec("ro",
[Field.byte("id"), Field.padding(12)],
[Field.byte('id'), Field.str('type', 1), Field.byte('light'), Field.int('timer'),
Field.int('ctimer'), Field.byte('status'), Field.dimmer('dimmer'),
Field.byte('controller_out'), Field.byte('max_power'), Field.byte('floor_level'),
Field.bytes('menu_position', 3), Field.str('name', 16), Field.crc(),
Field.lit('\r\n')])
def number_of_io_modules():
""" Read the number of input and output modules """
return MasterCommandSpec("rn", [Field.padding(13)], [
Field.byte("in"),
Field.byte("out"),
Field.byte("shutter"),
Field.padding(10),
Field.lit('\r\n')
])
def pulse_list():
""" List the pulse counter values. """
return MasterCommandSpec("PL",
[Field.padding(13)],
[Field.int('pv0'), Field.int('pv1'), Field.int('pv2'), Field.int('pv3'),
Field.int('pv4'), Field.int('pv5'), Field.int('pv6'), Field.int('pv7'),
Field.int('pv8'), Field.int('pv9'), Field.int('pv10'), Field.int('pv11'),
Field.int('pv12'), Field.int('pv13'), Field.int('pv14'), Field.int('pv15'),
Field.int('pv16'), Field.int('pv17'), Field.int('pv18'), Field.int('pv19'),
Field.int('pv20'), Field.int('pv21'), Field.int('pv22'), Field.int('pv23'),
Field.crc(), Field.lit('\r\n')])
def sensor_humidity_list():
""" Reads the list humidity values of the 32 (0-31) sensors. """
return MasterCommandSpec("hl",
[Field.padding(13)],
[Field.svt('hum0'), Field.svt('hum1'), Field.svt('hum2'), Field.svt('hum3'),
Field.svt('hum4'), Field.svt('hum5'), Field.svt('hum6'), Field.svt('hum7'),
Field.svt('hum8'), Field.svt('hum9'), Field.svt('hum10'), Field.svt('hum11'),
Field.svt('hum12'), Field.svt('hum13'), Field.svt('hum14'), Field.svt('hum15'),
Field.svt('hum16'), Field.svt('hum17'), Field.svt('hum18'), Field.svt('hum19'),
Field.svt('hum20'), Field.svt('hum21'), Field.svt('hum22'), Field.svt('hum23'),
Field.svt('hum24'), Field.svt('hum25'), Field.svt('hum26'), Field.svt('hum27'),
Field.svt('hum28'), Field.svt('hum29'), Field.svt('hum30'), Field.svt('hum31'),
Field.crc(), Field.lit('\r\n')])
def virtual_sensor_list():
""" Read the list with virtual settings of the 32 (0-31) sensors. """
return MasterCommandSpec("VL",
[Field.padding(13)],
[Field.byte('vir0'), Field.byte('vir1'), Field.byte('vir2'), Field.byte('vir3'),
Field.byte('vir4'), Field.byte('vir5'), Field.byte('vir6'), Field.byte('vir7'),
Field.byte('vir8'), Field.byte('vir9'), Field.byte('vir10'), Field.byte('vir11'),
Field.byte('vir12'), Field.byte('vir13'), Field.byte('vir14'), Field.byte('vir15'),
Field.byte('vir16'), Field.byte('vir17'), Field.byte('vir18'), Field.byte('vir19'),
Field.byte('vir20'), Field.byte('vir21'), Field.byte('vir22'), Field.byte('vir23'),
Field.byte('vir24'), Field.byte('vir25'), Field.byte('vir26'), Field.byte('vir27'),
Field.byte('vir28'), Field.byte('vir29'), Field.byte('vir30'), Field.byte('vir31'),
Field.crc(), Field.lit('\r\n')])
def read_airco_status_bits():
""" Read the airco status bits. """
return MasterCommandSpec("AR",
[Field.padding(13)],
[Field.byte("ASB0"), Field.byte("ASB1"), Field.byte("ASB2"), Field.byte("ASB3"),
Field.byte("ASB4"), Field.byte("ASB5"), Field.byte("ASB6"), Field.byte("ASB7"),
Field.byte("ASB8"), Field.byte("ASB9"), Field.byte("ASB10"), Field.byte("ASB11"),
Field.byte("ASB12"), Field.byte("ASB13"), Field.byte("ASB14"), Field.byte("ASB15"),
Field.byte("ASB16"), Field.byte("ASB17"), Field.byte("ASB18"), Field.byte("ASB19"),
Field.byte("ASB20"), Field.byte("ASB21"), Field.byte("ASB22"), Field.byte("ASB23"),
Field.byte("ASB24"), Field.byte("ASB25"), Field.byte("ASB26"), Field.byte("ASB27"),
Field.byte("ASB28"), Field.byte("ASB29"), Field.byte("ASB30"), Field.byte("ASB31"),
Field.lit("\r\n")])
def write_airco_status_bit():
""" Write the airco status bit. """
return MasterCommandSpec("AW",
[Field.byte("thermostat"), Field.byte("ASB"), Field.padding(11)],
[Field.byte("ASB0"), Field.byte("ASB1"), Field.byte("ASB2"), Field.byte("ASB3"),
Field.byte("ASB4"), Field.byte("ASB5"), Field.byte("ASB6"), Field.byte("ASB7"),
Field.byte("ASB8"), Field.byte("ASB9"), Field.byte("ASB10"), Field.byte("ASB11"),
Field.byte("ASB12"), Field.byte("ASB13"), Field.byte("ASB14"), Field.byte("ASB15"),
Field.byte("ASB16"), Field.byte("ASB17"), Field.byte("ASB18"), Field.byte("ASB19"),
Field.byte("ASB20"), Field.byte("ASB21"), Field.byte("ASB22"), Field.byte("ASB23"),
Field.byte("ASB24"), Field.byte("ASB25"), Field.byte("ASB26"), Field.byte("ASB27"),
Field.byte("ASB28"), Field.byte("ASB29"), Field.byte("ASB30"), Field.byte("ASB31"),
Field.lit("\r\n")])
def sensor_temperature_list():
""" Reads the list temperature values of the 32 (0-31) sensors. """
return MasterCommandSpec("cl",
[Field.padding(13)],
[Field.svt('tmp0'), Field.svt('tmp1'), Field.svt('tmp2'), Field.svt('tmp3'),
Field.svt('tmp4'), Field.svt('tmp5'), Field.svt('tmp6'), Field.svt('tmp7'),
Field.svt('tmp8'), Field.svt('tmp9'), Field.svt('tmp10'), Field.svt('tmp11'),
Field.svt('tmp12'), Field.svt('tmp13'), Field.svt('tmp14'), Field.svt('tmp15'),
Field.svt('tmp16'), Field.svt('tmp17'), Field.svt('tmp18'), Field.svt('tmp19'),
Field.svt('tmp20'), Field.svt('tmp21'), Field.svt('tmp22'), Field.svt('tmp23'),
Field.svt('tmp24'), Field.svt('tmp25'), Field.svt('tmp26'), Field.svt('tmp27'),
Field.svt('tmp28'), Field.svt('tmp29'), Field.svt('tmp30'), Field.svt('tmp31'),
Field.crc(), Field.lit('\r\n')])
def thermostat_mode_list():
""" Read the thermostat mode for each thermostat. """
return MasterCommandSpec("ml",
[Field.padding(13)],
[Field.byte('mode0'), Field.byte('mode1'), Field.byte('mode2'), Field.byte('mode3'),
Field.byte('mode4'), Field.byte('mode5'), Field.byte('mode6'), Field.byte('mode7'),
Field.byte('mode8'), Field.byte('mode9'), Field.byte('mode10'), Field.byte('mode11'),
Field.byte('mode12'), Field.byte('mode13'), Field.byte('mode14'), Field.byte('mode15'),
Field.byte('mode16'), Field.byte('mode17'), Field.byte('mode18'), Field.byte('mode19'),
Field.byte('mode20'), Field.byte('mode21'), Field.byte('mode22'), Field.byte('mode23'),
Field.byte('mode24'), Field.byte('mode25'), Field.byte('mode26'), Field.byte('mode27'),
Field.byte('mode28'), Field.byte('mode29'), Field.byte('mode30'), Field.byte('mode31'),
Field.crc(), Field.lit('\r\n')])
def sensor_brightness_list():
""" Reads the list brightness values of the 32 (0-31) sensors. """
return MasterCommandSpec("bl",
[Field.padding(13)],
[Field.svt('bri0'), Field.svt('bri1'), Field.svt('bri2'), Field.svt('bri3'),
Field.svt('bri4'), Field.svt('bri5'), Field.svt('bri6'), Field.svt('bri7'),
Field.svt('bri8'), Field.svt('bri9'), Field.svt('bri10'), Field.svt('bri11'),
Field.svt('bri12'), Field.svt('bri13'), Field.svt('bri14'), Field.svt('bri15'),
Field.svt('bri16'), Field.svt('bri17'), Field.svt('bri18'), Field.svt('bri19'),
Field.svt('bri20'), Field.svt('bri21'), Field.svt('bri22'), Field.svt('bri23'),
Field.svt('bri24'), Field.svt('bri25'), Field.svt('bri26'), Field.svt('bri27'),
Field.svt('bri28'), Field.svt('bri29'), Field.svt('bri30'), Field.svt('bri31'),
Field.crc(), Field.lit('\r\n')])
def permanent_manual_thermostat_list():
""" Read the permanent manual bytes, 1 per thermostat. """
return MasterCommandSpec("pL",
[Field.padding(13)],
[Field.byte('tm'),
Field.byte('pmt0'), Field.byte('pmt1'), Field.byte('pmt2'), Field.byte('pmt3'),
Field.byte('pmt4'), Field.byte('pmt5'), Field.byte('pmt6'), Field.byte('pmt7'),
Field.byte('pmt8'), Field.byte('pmt9'), Field.byte('pmt10'), Field.byte('pmt11'),
Field.byte('pmt12'), Field.byte('pmt13'), Field.byte('pmt14'), Field.byte('pmt15'),
Field.byte('pmt16'), Field.byte('pmt17'), Field.byte('pmt18'), Field.byte('pmt19'),
Field.byte('pmt20'), Field.byte('pmt21'), Field.byte('pmt22'), Field.byte('pmt23'),
Field.byte('pmt24'), Field.byte('pmt25'), Field.byte('pmt26'), Field.byte('pmt27'),
Field.byte('pmt28'), Field.byte('pmt29'), Field.byte('pmt30'), Field.byte('pmt31'),
Field.crc(), Field.lit('\r\n')])
def thermostat_list():
""" Read the thermostat mode, the outside temperature, the temperature of each thermostat,
as well as the setpoint.
"""
return MasterCommandSpec("tl",
[Field.padding(13)],
[Field.byte('mode'), Field.svt('outside'),
Field.svt('tmp0'), Field.svt('tmp1'), Field.svt('tmp2'), Field.svt('tmp3'),
Field.svt('tmp4'), Field.svt('tmp5'), Field.svt('tmp6'), Field.svt('tmp7'),
Field.svt('tmp8'), Field.svt('tmp9'), Field.svt('tmp10'), Field.svt('tmp11'),
Field.svt('tmp12'), Field.svt('tmp13'), Field.svt('tmp14'), Field.svt('tmp15'),
Field.svt('tmp16'), Field.svt('tmp17'), Field.svt('tmp18'), Field.svt('tmp19'),
Field.svt('tmp20'), Field.svt('tmp21'), Field.svt('tmp22'), Field.svt('tmp23'),
Field.svt('tmp24'), Field.svt('tmp25'), Field.svt('tmp26'), Field.svt('tmp27'),
Field.svt('tmp28'), Field.svt('tmp29'), Field.svt('tmp30'), Field.svt('tmp31'),
Field.svt('setp0'), Field.svt('setp1'), Field.svt('setp2'), Field.svt('setp3'),
Field.svt('setp4'), Field.svt('setp5'), Field.svt('setp6'), Field.svt('setp7'),
Field.svt('setp8'), Field.svt('setp9'), Field.svt('setp10'), Field.svt('setp11'),
Field.svt('setp12'), Field.svt('setp13'), Field.svt('setp14'), Field.svt('setp15'),
Field.svt('setp16'), Field.svt('setp17'), Field.svt('setp18'), Field.svt('setp19'),
Field.svt('setp20'), Field.svt('setp21'), Field.svt('setp22'), Field.svt('setp23'),
Field.svt('setp24'), Field.svt('setp25'), Field.svt('setp26'), Field.svt('setp27'),
Field.svt('setp28'), Field.svt('setp29'), Field.svt('setp30'), Field.svt('setp31'),
Field.crc(), Field.lit('\r\n')])
def module_initialize():
""" The message sent by the master whenever a module is initialized in module discovery mode. """
return MasterCommandSpec("MI",
[],
[Field.str('id', 4), Field.str('instr', 1), Field.byte('module_nr'), Field.byte('data'),
Field.byte('io_type'), Field.padding(5), Field.lit('\r\n')])
def write_timer():
""" Writes a timer setting to an Output, and immediately activates the timer value (even when an Output is already on). """
return MasterCommandSpec("WT",
[Field.byte("id"), Field.int("timer"), Field.padding(10)],
[Field.byte("id"), Field.int("timer"), Field.padding(10), Field.lit("\r\n")],
"RT")
def output_list():
""" The message sent by the master whenever the outputs change. """
return MasterCommandSpec("OL",
[],
[Field("outputs", OutputFieldType()), Field.lit("\r\n")])
def input_list():
""" The message sent by the master whenever an input is enabled. """
return MasterCommandSpec("IL",
[],
[Field.byte('input'), Field.byte('output'), Field.lit("\r\n")])
def change_communication_mode_to_short():
""" Change the number of bytes used to communicate with the master to 18. """
return MasterCommandSpec("cm",
[Field.lit('\x12'), Field.lit('\x01'), Field.padding(71)],
[Field.lit('\x12'), Field.lit('\x01'), Field.padding(11), Field.lit("\r\n")])
def event_triggered():
""" The message sent by the master to trigger an event. This event is triggered by basic action 60. """
return MasterCommandSpec("EV",
[],
[Field.byte('code'), Field.padding(12), Field.lit('\r\n')])
