def _ccs_default(self):
'''default settings correspond to
setup '9u_MAG-07-03_PZ-0708-1'
'''
print 'ccs default used'
fabric_layout_key = 'Q95/95-CCE-38'
concrete_mixture_key = 'C3-HF2-165-4'
orientation_fn_key = 'all0'
n_layers = 1
thickness = 0.04
s_tex_z = thickness / (n_layers + 1)
ccs = CompositeCrossSection(
fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp(
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key
),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key
)
return ccs
def _ccs_default(self):
'''default settings
'''
# fabric_layout_key = 'MAG-07-03'
# fabric_layout_key = '2D-02-06a'
fabric_layout_key = '2D-05-11'
# fabric_layout_key = '2D-09-12'
# concrete_mixture_key = 'PZ-0708-1'
# concrete_mixture_key = 'FIL-10-09'
concrete_mixture_key = 'barrelshell'
orientation_fn_key = 'all0'
# orientation_fn_key = 'all90'
# orientation_fn_key = '90_0'
n_layers = 6
s_tex_z = 0.020 / (n_layers + 1)
ccs = CompositeCrossSection(fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp(n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key)
return ccs
def _ccs_default(self):
'''default settings correspond to
setup '7u_MAG-07-03_PZ-0708-1'
'''
fabric_layout_key = '2D-05-11'
# fabric_layout_key = 'MAG-07-03'
# fabric_layout_key = '2D-02-06a'
# concrete_mixture_key = 'PZ-0708-1'
# concrete_mixture_key = 'FIL-10-09'
# concrete_mixture_key = 'barrelshell'
concrete_mixture_key = 'PZ-0708-1'
# orientation_fn_key = 'all0'
orientation_fn_key = '90_0'
n_layers = 2
s_tex_z = 0.015 / (n_layers + 1)
ccs = CompositeCrossSection (
fabric_layup_list=[
plain_concrete(0.035),
# plain_concrete(s_tex_z * 0.5),
FabricLayUp (
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key
),
# plain_concrete(s_tex_z * 0.5)
plain_concrete(0.5)
],
concrete_mixture_key=concrete_mixture_key
)
return ccs
def _ccs_default(self):
'''default settings correspond to
setup '9u_MAG-07-03_PZ-0708-1'
'''
print 'ccs default used'
fabric_layout_key = 'CAR-3300-SBR_BTZ2'
concrete_mixture_key = 'Pagel_TF10'
orientation_fn_key = 'all0'
n_layers = 2
thickness = 0.015
s_tex_z = thickness / (n_layers + 1)
ccs = CompositeCrossSection(
fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp(
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key
),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key
)
return ccs
def _ccs_default(self):
'''default settings
'''
# fabric_layout_key = 'MAG-07-03'
# fabric_layout_key = '2D-02-06a'
fabric_layout_key = '2D-05-11'
# fabric_layout_key = '2D-09-12'
# concrete_mixture_key = 'PZ-0708-1'
# concrete_mixture_key = 'FIL-10-09'
concrete_mixture_key = 'barrelshell'
orientation_fn_key = 'all0'
# orientation_fn_key = 'all90'
# orientation_fn_key = '90_0'
n_layers = 6
s_tex_z = 0.020 / (n_layers + 1)
ccs = CompositeCrossSection(
fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp(
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key
),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key
)
return ccs
def _ccs_default(self):
'''default settings correspond to
setup '7u_MAG-07-03_PZ-0708-1'
'''
fabric_layout_key = 'MAG-07-03'
# fabric_layout_key = '2D-02-06a'
concrete_mixture_key = 'PZ-0708-1'
# concrete_mixture_key = 'FIL-10-09'
# orientation_fn_key = 'all0'
orientation_fn_key = '90_0'
n_layers = 10
s_tex_z = 0.030 / (n_layers + 1)
ccs = CompositeCrossSection (
fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp (
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key
),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key
)
return ccs
def change_flu_list(self):
print('XXX Append ccs.flu_list --------------------')
self.exrv.model.ex_type.ccs.fabric_layup_list.append(plain_concrete(0.01))
flu_list_new = self.exrv.model.ex_type.ccs.fabric_layup_list
print('--- SET: ccs.fabric_layup_list (new)= ', flu_list_new , '---')
print('--- GET: unsaved = ', self.exrv.unsaved, '---')
return flu_list_new
def _ccs_default(self):
'''default settings'
'''
# SFB 532 - demonstrator textil and concrete:
fabric_layout_key = '2D-05-11'
concrete_mixture_key = 'FIL-10-09'
orientation_fn_key = 'all0'
n_layers = 1
# s_tex_z = 0.060 / (n_layers + 1)
ccs = CompositeCrossSection(
fabric_layup_list=[
# plain_concrete(s_tex_z * 0.5),
FabricLayUp(
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
# s_tex_z=s_tex_z,
s_tex_z=0.030, # [m]
fabric_layout_key=fabric_layout_key
),
plain_concrete(0.025), # [m]
# plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key
)
return ccs
def change_flu_list(self):
print 'XXX Append ccs.flu_list --------------------'
self.exrv.model.ex_type.ccs.fabric_layup_list.append(plain_concrete(0.01))
flu_list_new = self.exrv.model.ex_type.ccs.fabric_layup_list
print '--- SET: ccs.fabric_layup_list (new)= ', flu_list_new , '---'
print '--- GET: unsaved = ', self.exrv.unsaved, '---'
return flu_list_new
def _ccs_default(self):
'''default settings'
'''
# SFB 532 - demonstrator textil and concrete:
fabric_layout_key = 'CAR-3300-SBR_BTZ2'
concrete_mixture_key = 'Pagel_TF10'
orientation_fn_key = 'all0'
n_layers = 2
s_tex_z = 0.015 / (n_layers + 1)
ccs = CompositeCrossSection(fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp(n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key)
return ccs
def _ccs_default(self):
'''default settings correspond to
setup '9u_MAG-07-03_PZ-0708-1'
'''
print 'ccs default used'
fabric_layout_key = 'CAR-3300-SBR_BTZ2'
concrete_mixture_key = 'Pagel_TF10'
orientation_fn_key = 'all0'
n_layers = 2
thickness = 0.015
s_tex_z = thickness / (n_layers + 1)
ccs = CompositeCrossSection(fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp(n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key)
return ccs
def _ccs_default(self):
'''default settings correspond to
setup '9u_MAG-07-03_PZ-0708-1'
'''
print 'ccs default used'
# fabric_layout_key = 'MAG-07-03'
# fabric_layout_key = '2D-02-06a'
# fabric_layout_key2 = 'C-Grid-C50'
# fabric_layout_key1 = '2D-14-10'
# fabric_layout_key = '2D-14-10'
# fabric_layout_key = '2D-18-10'
# fabric_layout_key = '2D-04-11'
fabric_layout_key = '2D-05-11'
# fabric_layout_key = '2D-15-10'
# concrete_mixture_key = 'PZ-0708-1'
concrete_mixture_key = 'barrelshell'
# concrete_mixture_key = 'FIL-10-09'
orientation_fn_key = 'all0'
# orientation_fn_key = 'all90'
# orientation_fn_key = '90_0'
n_layers = 6
thickness = 0.02
s_tex_z = thickness / (n_layers + 1)
ccs = CompositeCrossSection (
fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp (
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key
),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key
)
return ccs
def _ccs_default(self):
'''default settings'
'''
# SFB 532 - demonstrator textil and concrete:
fabric_layout_key = 'CAR-3300-SBR_BTZ2'
concrete_mixture_key = 'Pagel_TF10'
orientation_fn_key = 'all0'
n_layers = 2
s_tex_z = 0.015 / (n_layers + 1)
ccs = CompositeCrossSection(
fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp(
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key
),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key
)
return ccs
def _ccs_default(self):
'''default settings'
'''
# SFB 532 - demonstrator textil and concrete:
fabric_layout_key = 'Q121/121-AAE-38'
concrete_mixture_key = 'C3-HF2-155-5'
orientation_fn_key = 'all0'
n_layers = 1
s_tex_z = 0.03 / (n_layers + 1)
ccs = CompositeCrossSection(
fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp(
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key
),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key
)
return ccs
def _ccs_default(self):
'''default settings'
'''
# SFB 532 - demonstrator textil and concrete:
fabric_layout_key = '2D-05-11'
concrete_mixture_key = 'FIL-10-09'
orientation_fn_key = 'all0'
n_layers = 1
# s_tex_z = 0.060 / (n_layers + 1)
ccs = CompositeCrossSection(
fabric_layup_list=[
# plain_concrete(s_tex_z * 0.5),
FabricLayUp(
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
# s_tex_z=s_tex_z,
s_tex_z=0.030, # [m]
fabric_layout_key=fabric_layout_key),
plain_concrete(0.025), # [m]
# plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key)
return ccs
print '--- GET: unsaved = ', exrv.unsaved, '---' #---------------------------------------------------------- # change data file to another file and then change it back #---------------------------------------------------------- print 'XXX Change data file to another file and then change it back--------------------' exrv.data_file = ex_path_TT_7a_V2 print '--- SET: data file (new): ', exrv.data_file exrv.data_file = ex_path_TT_7a_V1 print '--- SET: data file (back to old): ', exrv.data_file #---------------------------------------------------------- # change attribute in 'ccs.fabric_layup_list' #---------------------------------------------------------- print 'XXX change attribute in ccs.fabric_layup_list --------------------' exrv.model.ex_type.ccs.fabric_layup_list.append(plain_concrete(0.01)) print '--- SET: ccs.fabric_layup_list = ', exrv.model.ex_type.ccs.fabric_layup_list, '---' print '--- GET: unsaved = ', exrv.unsaved, '---' exrv.save_run() #---------------------------------------------------------- # change data file to another file and then change it back #---------------------------------------------------------- print 'XXX Change data file to another file and then change it back--------------------' exrv.data_file = ex_path_TT_7a_V2 print '--- SET: data file (new): ', exrv.data_file exrv.data_file = ex_path_TT_7a_V1 print '--- SET: data file (back to old): ', exrv.data_file #---------------------------------------------------------- # change attribute in 'ccs.fabric_layup_list[0].s_tex_z'
print '--- GET: unsaved = ', exrv.unsaved, '---'
#----------------------------------------------------------
# change data file to another file and then change it back
#----------------------------------------------------------
print 'XXX Change data file to another file and then change it back--------------------'
exrv.data_file = ex_path_TT_7a_V2
print '--- SET: data file (new): ', exrv.data_file
exrv.data_file = ex_path_TT_7a_V1
print '--- SET: data file (back to old): ', exrv.data_file
#----------------------------------------------------------
# change attribute in 'ccs.fabric_layup_list'
#----------------------------------------------------------
print 'XXX change attribute in ccs.fabric_layup_list --------------------'
exrv.model.ex_type.ccs.fabric_layup_list.append(plain_concrete(0.01))
print '--- SET: ccs.fabric_layup_list = ', exrv.model.ex_type.ccs.fabric_layup_list, '---'
print '--- GET: unsaved = ', exrv.unsaved, '---'
exrv.save_run()
#----------------------------------------------------------
# change data file to another file and then change it back
#----------------------------------------------------------
print 'XXX Change data file to another file and then change it back--------------------'
exrv.data_file = ex_path_TT_7a_V2
print '--- SET: data file (new): ', exrv.data_file
exrv.data_file = ex_path_TT_7a_V1
print '--- SET: data file (back to old): ', exrv.data_file
#----------------------------------------------------------
# change attribute in 'ccs.fabric_layup_list[0].s_tex_z'