def loadSceneAssemblyPlugins(tankError = False):
## PLUGIN CHECK
## First try to make sure the plugins are loaded in maya
if not cmds.pluginInfo('AbcExport.mll', query = True, loaded = True):
try:
cmds.loadPlugin('AbcExport.mll')
except RuntimeError:
if TankError:
raise TankError("AbcExport failed to load!!")
if not cmds.pluginInfo('AbcImport.mll', query = True, loaded = True):
try:
cmds.loadPlugin('AbcImport.mll')
except RuntimeError:
if TankError:
raise TankError("AbcImport plugin failed to load!!")
if not cmds.pluginInfo('gpuCache.mll', query = True, loaded = True):
try:
cmds.loadPlugin('gpuCache.mll')
except RuntimeError:
if TankError:
raise TankError("gpuCache plugin failed to load!!")
if not cmds.pluginInfo('sceneAssembly.mll', query = True, loaded = True):
try:
cmds.loadPlugin('sceneAssembly.mll')
except RuntimeError:
if TankError:
raise TankError("sceneAssembly plugin failed to load!!")
def __init__(self):
'''
load fbxmaya plugin in initialisation
'''
try:
plugin = cmds.pluginInfo( query=True, listPlugins=True, version=True )
fbxplugin = 'fbxmaya'
if cmds.pluginInfo(fbxplugin+ ".mll", query=True, loaded=True):
cmds.pluginInfo(fbxplugin + ".mll", edit=True, autoload=True)
else:
cmds.loadPlugin(fbxplugin + ".mll")
except:
print "fbxMaya was not found on MAYA_PLUG_IN_PATH:", sys.exc_info()[0]
self.listGrp = []
self.children = []
self.childrenLong = []
# self.listGrp.append('FG')
# self.listGrp.append('BG')
# self.listGrp.append('MG')
self.listGrp = ['fg','mg','bg']
self.upperL = r'''[A-Z]'''
'''
window variables
'''
self.win = "fbxExport"
self.fbxPath1 = "textfield"
self.fbxPath2 = "button"
self.expPath = ""
def enableaPlugin(filename):
extDict = {'win64':'mll','mac':'bundle','linux':'so','linux64':'so'}
os = cmds.about(os=True)
ext = extDict[os]
version = cmds.about(v=True)[:4]
pluginName = 'deltaMushToSkinCluster_%s' % version
fileFullName = '%s.%s' % (pluginName,ext)
rootPath = getParentPath(currentFileDirectory())
pluginsPath = rootPath+'/plug-ins/'
pluginFilePath = pluginsPath+fileFullName
pluginStr = mel.eval('getenv "MAYA_PLUG_IN_PATH";')+';'+pluginsPath
mel.eval('putenv "MAYA_PLUG_IN_PATH" "%s";' % pluginStr)
with open(filename,'a+') as f:
state = True
for line in f.readlines():
if re.findall(fileFullName,line):
state = False
if state:
f.write(r'evalDeferred("autoLoadPlugin(\"\", \"%s\", \"%s\")");' % (fileFullName,pluginName))
if not cmds.pluginInfo( pluginFilePath, query=True, autoload=True):
cmds.pluginInfo( pluginFilePath, edit=True, autoload=True)
if not cmds.pluginInfo(pluginFilePath,query=True,loaded=True):
cmds.loadPlugin(pluginFilePath)
def loadPlugin():
"""
load softSelectionQuery plugin
"""
mayaVers = int(mayaVersion())
os = cmds.about(os=1)
if os == 'win64':
pluginName = 'softSelectionQuery_%s-x64.mll' % mayaVers
elif os == 'mac':
pluginName = 'softSelectionQuery_%s.bundle' % mayaVers
elif os == 'linux64':
pluginName = 'softSelectionQuery_%s.so' % mayaVers
else:
cmds.error('Soft Cluster EX is available for 64bit version of Autodesk Maya 2011 '
'or above under Windows 64bit, Mac OS X and Linux 64bit!')
if not cmds.pluginInfo(pluginName, q=True, l=True ):
cmds.loadPlugin(pluginName)
version = cmds.pluginInfo(pluginName, q=1, v=1)
log.info('Plug-in: %s v%s loaded success!' % (pluginName, version))
else:
version = cmds.pluginInfo(pluginName, q=1, v=1)
log.info('Plug-in: %s v%s has been loaded!' % (pluginName, version))
def setupScene():
'''
Setup some scene attributes we want to be common to all Spinifex car scenes
TODO:
make width over height as float
'''
# Check if we haven't done this before
if cmds.objExists('vraySettings.setupSceneHasBeenRun'):
# Check that everything is setup correctly before continuing.
dialogMessage = 'setupScene has already been run. Do you wish to continue? Some of your render settings will be reset.'
result = cmds.confirmDialog( title='spckSetupScene', message=dialogMessage, button=['YES','NO'], defaultButton='NO', cancelButton='NO', dismissString='NO' )
if result == 'NO' :
print("Aborted. We\'ve done this before...\n")
return
else:
# Check that everything is setup correctly before continuing.
dialogMessage = 'Have you set up your workspace.mel?'
result = cmds.confirmDialog( title='spckSetupScene', message=dialogMessage, button=['YES','NO'], defaultButton='YES', cancelButton='NO', dismissString='NO' )
if result == 'NO' :
print('Go setup your workspace and run again.\n')
return
# Units for working in metric and 30fps
cmds.currentUnit (linear='cm')
cmds.currentUnit (angle='deg')
cmds.currentUnit (time='ntsc')
# Load VRAY if not active
cmds.loadPlugin ('vrayformaya', quiet=True)
cmds.pluginInfo ('vrayformaya', edit=True, autoload=True)
cmds.setAttr ('defaultRenderGlobals.ren', 'vray', type='string')
cmds.evalDeferred ( 'createBaseRenderSettings()' , lowestPriority=True )
print('Success.\n')
def remove_unknown_nodes():
removed_count = 0
unknown_nodes = cmds.ls(type="unknown")
for node in unknown_nodes:
if cmds.objExists(node):
sys.stdout.write("Remove unknown node '{}'.\n".format(node))
cmds.lockNode(node, lock=False)
cmds.delete(node)
removed_count += 1
if cmds.pluginInfo("Turtle.mll", q=True, loaded=True):
cmds.pluginInfo("Turtle.mll", e=True, autoload=False)
cmds.unloadPlugin("Turtle.mll", force=True)
turtle_nodes = ["TurtleDefaultBakeLayer",
"TurtleBakeLayerManager",
"TurtleRenderOptions",
"TurtleUIOptions"]
for node in turtle_nodes:
if cmds.objExists(node):
sys.stdout.write("Remove Turtle node '{}'.\n".format(node))
cmds.lockNode(node, lock=False)
cmds.delete(node)
removed_count += 1
sys.stdout.write(str(removed_count) + " unknown nodes removed.\n")
def loadMentalRayPlugin():
name = 'Mayatomr'
if not cmds.pluginInfo(name, q=True, loaded=True):
cmds.loadPlugin(name)
cmds.pluginInfo(name, edit=True, autoload=True)
cmds.setAttr('defaultRenderGlobals.currentRenderer', 'mentalRay', type='string')
print ('# Result: mental ray Plugin loaded #')
def initializePlugin(obj):
plugin = OpenMayaMPx.MFnPlugin(obj)
try:
plugin.registerNode(ms_environment_nodeTypeName, ms_environment_nodeTypeId, ms_environment_nodeCreator, ms_environment_nodeInitializer, OpenMayaMPx.MPxNode.kLocatorNode)
except:
sys.stderr.write("Failed to register node: %s" % ms_environment_nodeTypeName)
try:
plugin.registerNode(ms_renderSettings_nodeTypeName, ms_renderSettings_nodeTypeId, ms_renderSettings_nodeCreator, ms_renderSettings_nodeInitializer)
except:
sys.stderr.write("Failed to register node: %s\n" % ms_renderSettings_nodeTypeName)
# load objExport plugin if its not loaded yet
try:
if not cmds.pluginInfo('objExport', query=True, loaded=True):
cmds.loadPlugin('objExport')
if not cmds.pluginInfo('ms_appleseed_material.py', query=True, loaded=True):
cmds.loadPlugin('ms_appleseed_material.py')
if not cmds.pluginInfo('ms_appleseed_shading_node.py', query=True, loaded=True):
cmds.loadPlugin('ms_appleseed_shading_node.py')
except:
print 'objExport plugin could not be loaded, cannot load mayaseed'
ms_menu.createMenu()
ms_menu.buildMenu()
def loadDecomposeMatDll(self):
mversion = (maya.mel.eval("float $mayaVersion = `getApplicationVersionAsFloat` ;"))
if(mversion >2012):
if not cmds.pluginInfo(("matrixNodes.mll"),q=True,loaded=True):
cmds.loadPlugin("matrixNodes.mll")
#set autoloaded
cmds.pluginInfo("matrixNodes.mll",e=True,autoload=True)
def isPluginNode(nodeName):
import maya.cmds as cmds
for plugin in cmds.pluginInfo(q=1, listPlugins=True):
plugNodes = cmds.pluginInfo(plugin, q=1, dependNode=True)
# plugNodes may be None...
if plugNodes and nodeName in plugNodes:
return True
return False
def load_plugin(self, pluginName):
if self.is_plugin_loaded(pluginName):
return True
try:
cmds.loadPlugin(pluginName, quiet=True)
cmds.pluginInfo(pluginName, edit=True, autoload=True)
return True
except:
return False
def setUpAll(cls):
if cls.env_var_plugin_path not in os.environ:
raise AssertionError("Missing configuration variable: %s" % cls.env_var_plugin_path)
#END handle conf
cls.test_plugin_path = os.environ[cls.env_var_plugin_path]
if not cmds.pluginInfo(cls.test_plugin_path, q=1, loaded=1):
cmds.loadPlugin(cls.test_plugin_path)
# even though loadPlugin may fail, it doesn't throw a runtime error
if not cmds.pluginInfo(cls.test_plugin_path, q=1, loaded=1):
raise AssertionError("Failed to load plugin at %s" % cls.test_plugin_path)
def checkPlugins(plugins):
"""Check if plugin are loaded."""
pluginList = cmds.pluginInfo(query=True, listPlugins=True) or []
for plugin in plugins:
if plugin not in pluginList:
loadPlugin(plugin)
pluginList = cmds.pluginInfo(query=True, listPlugins=True) or []
notloaded = [i for i in plugins if i not in pluginList]
if notloaded:
raise RuntimeError("Some plugins won't load: {}".format(', '.join(notloaded)))
def test(self):
"""
Run an internal consistency test on the pattern creator to verify its
functions are operating correctly.
"""
factoryIsLoaded = cmds.pluginInfo('pyJsonAttrPatternFactory.py', query=True, loaded=True)
if not factoryIsLoaded:
try:
cmds.loadPlugin('pyJsonAttrPatternFactory.py', quiet=True)
except:
# Repotest environment won't find it so skip it then
return False
factoryIsLoaded = cmds.pluginInfo('pyJsonAttrPatternFactory.py', query=True, loaded=True)
# If the environment isn't set up to find the plugin there's
# nothing we can do about it. It's not a failure of the test so
# don't report anything other than a warning that the test could
# not be run.
if not factoryIsLoaded:
print 'Warning: JSON attribute pattern factory could not be loaded, test aborted'
return False
patterns = """
[
{
"name": "testPattern",
"attributes": [
{
"name" : "floatWithRanges",
"shortName" : "fwr",
"defaultValue" : 0.5,
"min" : -10.0,
"max" : 20.0,
"softMin" : 1.0,
"softMax" : 10.0,
"attributeType" : "float"
} ,
{
"name" : "float3WithRanges",
"shortName" : "ftwr",
"defaultValue" : [7.5, 7.6, 7.7],
"min" : [-17.0, -17.1, -17.2],
"max" : [27.0, 27.1, 27.2],
"attributeType" : "float3"
}
]
}
]
"""
cmds.createAttrPatterns( patternType='json', patternDefinition=patterns )
cmds.file( force=True, new=True )
node = cmds.createNode( 'addMatrix' )
cmds.applyAttrPattern( node, patternName='testPattern' )
jsonString = self.nodeAsJSON( node )
print json.dumps(jsonString, indent=4)
def _cmdsFunctionFormat(self):
'''set up maya.cmds functions'''
# mayaBinDir = os.path.dirname(sys.executable)
# cmdsList = os.path.join(mayaBinDir, 'commandList')
functions = '\\b('
# with open(cmdsList) as phile:
# for line in phile:
# functions += line.split(' ')[0] + '|'
maya_ver=utils.get_maya_version()
maya_commands = utils.get_commands(version=maya_ver)
for c in maya_commands:
functions += c + '|'
# global MEL procedures
try:
melProcedures = cmds.melInfo()
maxlen = 1400
stop = len(melProcedures) / maxlen
melProc = []
melProc.append('\\b(' + '|'.join(melProcedures[:maxlen]) + ')\\b')
for i in range(1, stop - 1):
start = maxlen * i
end = maxlen * (i + 1)
melProc.append('\\b(' + '|'.join(melProcedures[start:end]) + ')\\b')
melProc.append('\\b(' + '|'.join(melProcedures[maxlen*stop:]) + ')\\b')
except:
pass
# TODO: should update it when a plug-in was load.
try:
# function from plug-ins
plugins = cmds.pluginInfo(q=1, listPlugins=1)
for plugin in plugins:
funcFromPlugin = cmds.pluginInfo(plugin, q=1, command=1)
if funcFromPlugin:
functions += '|'.join(funcFromPlugin)
except:
pass
functions = functions[:-1] + ')\\b'
# function format
funcFormat = QtGui.QTextCharFormat()
funcFormat.setForeground(self._keywordColor)
self.__rules.append((re.compile(functions), funcFormat))
try:
for mp in melProc:
self.__rules.append((re.compile(mp), funcFormat))
except:
pass
def restoreShelves():
#restore unloaded plugins
plugins = prefs.unnecessaryPluginsForAnim
for plugin in plugins:
if not (cmds.pluginInfo(plugin, loaded=True, q=True)):
try:
cmds.loadPlugin(plugin)
cmds.pluginInfo(plugin, autoload=True, e=True)
except:
print "{0} plugin doesn't exist in this version of Maya".format(plugin)
#restoren shelves marked as *.deleted
lib.restoreShelves()
def _fetchHengine(self):
v = cmds.about(version=True)
hengineInfo = ""
mayaType = HComMayaUtils.CLIENT_TYPE.MAYA_NO_HENGINE
plugins = cmds.pluginInfo( query=True, listPlugins=True )
if plugins:
if "houdiniEngine" in cmds.pluginInfo( query=True, listPlugins=True ):
hengineInfo = " (Houdini Engine Loaded)"
mayaType = HComMayaUtils.CLIENT_TYPE.MAYA_HENGINE
return [mayaType, "Maya " + str(v) + hengineInfo]
def flush(): pluginPaths = map( Path, api.mel.eval( 'getenv MAYA_PLUG_IN_PATH' ).split( ';' ) ) #NOTE: os.environ is different from the getenv call, and getenv isn't available via python... yay! #before we do anything we need to see if there are any plugins in use that are python scripts - if there are, we need to ask the user to close the scene #now as you might expect maya is a bit broken here - querying the plugins in use doesn't return reliable information - instead we ask for all loaded #plugins, to which maya returns a list of extension-less plugin names. We then have to map those names back to disk by searching the plugin path and #determining whether the plugins are binary or scripted plugins, THEN we need to see which the scripted ones are unloadable. loadedPluginNames = cmd.pluginInfo( q=True, ls=True ) or [] loadedScriptedPlugins = [] for pluginName in loadedPluginNames: for p in pluginPaths: possiblePluginPath = (p / pluginName).setExtension( 'py' ) if possiblePluginPath.exists(): loadedScriptedPlugins.append( possiblePluginPath[-1] ) initialScene = None for plugin in loadedScriptedPlugins: if not cmd.pluginInfo( plugin, q=True, uo=True ): BUTTONS = YES, NO = 'Yes', 'NO' ret = cmd.confirmDialog( t='Plugins in Use!', m="Your scene has python plugins in use - these need to be unloaded to properly flush.\n\nIs it cool if I close the current scene? I'll prompt to save your scene...\n\nNOTE: No flushing has happened yet!", b=BUTTONS, db=NO ) if ret == NO: print "!! FLUSH ABORTED !!" return initialScene = cmd.file( q=True, sn=True ) #prompt to make new scene if there are unsaved changes... api.mel.saveChanges( 'file -f -new' ) break #now unload all scripted plugins for plugin in loadedScriptedPlugins: cmd.unloadPlugin( plugin ) #we need to unload the plugin so that it gets reloaded (it was flushed) - it *may* be nessecary to handle the plugin reload here, but we'll see how things go for now #lastly, close all windows managed by baseMelUI - otherwise callbacks may fail... for melUI in baseMelUI.BaseMelWindow.IterInstances(): melUI.delete() #determine the location of maya lib files - we don't want to flush them either mayaLibPath = Path( maya.__file__ ).up( 2 ) #flush all modules dependencies.flush( [ mayaLibPath ] ) if initialScene and not cmd.file( q=True, sn=True ): if Path( initialScene ).exists(): cmd.file( initialScene, o=True ) print "WARNING: You'll need to close and re-open any python based tools that are currently open..."
def loadMentalRay(currentEngine=True):
""" Load Mental Ray plugin
@param currentEngine: (bool) : Set MentalRay as current render engine """
name = "Mayatomr"
#-- Load MentalRay PlugIn --#
if not mc.pluginInfo(name, q=True, loaded=True):
print "Load MentalRayPlugin ..."
mc.loadPlugin(name)
mc.pluginInfo(name, edit=True, autoload=True)
#-- Use MentalRay As Current Renderer --#
if currentEngine:
print "Set MentalRay as current render engine ..."
mc.setAttr('defaultRenderGlobals.currentRenderer', 'mentalRay', type='string')
print "# Result: mental ray Plugin loaded #"
def animPlugin( self ):
state = pluginInfo( 'animImportExport', q=True, loaded=True )
if state == 0:
platform = os.name
print platform
if platform == 'Linux':
cmds.pluginInfo( '/software/apps/maya/2012.sp1/cent5.x86_64/bin/plug-ins/' + 'animImportExport', e=True, a=True )
cmds.loadPlugin( 'animImportExport' )
elif platform == 'nt':
path = "C:\Program Files\Autodesk\Maya2013" + "\\" + "bin\plug-ins" + "\\" + "animImportExport.mll"
print path
cmds.pluginInfo( 'C:\Program Files\Autodesk\Maya2013\\bin\plug-ins\\' + 'animImportExport.mll', e=True, a=True )
cmds.loadPlugin( 'animImportExport' )
else:
pass
def verifyPlugin(pluginName, requiredBy):
"""
Verify that a particular plug-in is loaded and attempt to load it if it
cannot be found.
@param pluginName Name of the plugin without extension
@param requiredBy __file__ member of the caller
"""
try: tcpy.indexOf(pluginName, __allPlugins__)
except:
try:
MC.loadPlugin('%s.py'%pluginName)
MC.pluginInfo('%s.py'%pluginName, e=True, autoload=True)
except:
sys.stderr.write('Error: Could not locate the %s plug-in. It is required for the %s module.\nPlease ensure that %s.py is located somewhere in your plug-in path.\n'
%(pluginName, os.path.basename(requiredBy), pluginName))
def __init__(self):
# set up necessary plug-ins
if not cmds.pluginInfo('nearestPointOnMesh', query=True, loaded=True):
try:
cmds.loadPlugin('nearestPointOnMesh')
except NameError:
pass
def load_plugins_deferred():
#plugin_list
plugin_list = ['vrayformaya.mll',
'rrSubmit_Maya_8.5+.py',
'helga_asset_metadata.py',
'helga_shots_metadata.py',
'AnimSchoolPicker.mll',
'LBrush']
#iterate plugin_list and load
for plugin_name in plugin_list:
try:
if not(cmds.pluginInfo(plugin_name , query = True, loaded = True)):
try:
cmds.loadPlugin(plugin_name)
#Print to console instead of script editor
sys.__stdout__.write('->Successfully loaded ' +plugin_name +' deferred\n')
except:
sys.__stdout__.write('->Error loading ' +plugin_name +' deferred\n')
else:
sys.__stdout__.write('->Skipped loading ' +plugin_name +' deferred. Plugin was already loaded\n')
except:
sys.__stdout__.write('->Error loading ' +plugin_name +' deferred\n')
#Dividerline
sys.__stdout__.write(DIVIDERLINE)
def snapObjectsOnSupport(objects, support):
"""
Snaps objects on support.
:param objects: Objects to snap.
:type objects: list
:param value: Support.
:type value: str
"""
if cmds.pluginInfo("nearestPointOnMesh", q=True, loaded=False):
cmds.loadPlugin("nearestPointOnMesh")
nearestPointOnMesh = cmds.createNode("nearestPointOnMesh")
supportShape = getShapes(support)[0]
cmds.connectAttr(supportShape + ".outMesh", nearestPointOnMesh + ".inMesh", f=True)
allAxis = ("X", "Y", "Z")
for object in objects:
position = cmds.xform(object, q=True, rp=True, ws=True, a=True)
for i, axis in enumerate(allAxis):
cmds.setAttr(nearestPointOnMesh + ".inPosition" + axis, position[i])
cmds.select(object)
cmds.move(cmds.getAttr(nearestPointOnMesh + ".positionX"),
cmds.getAttr(nearestPointOnMesh + ".positionY"),
cmds.getAttr(nearestPointOnMesh + ".positionZ"),
rpr=True)
cmds.delete(nearestPointOnMesh)
def post_standalone_initialized(self):
from mrv.maya.util import OptionVarDict
import maya.cmds as cmds
import maya.mel
ovars = OptionVarDict()
ovar = "TEST_OVAR"
# check runtime comamnds
assert 'MyTestRuntimeCommand' in (cmds.runTimeCommand(q=1, uca=1) or list())
plugins = ("ge2Export", "decomposeMatrix")
for plugname in plugins:
assert cmds.pluginInfo(plugname, q=1, loaded=1)
# check auto load plugins
# check option vars
assert ovar in ovars
assert ovars[ovar] == 3
# check user setup
tscript = """global int $gTestVar;
if( $gTestVar != 5 ){
error("AssertionError, global variable was not set");
}"""
maya.mel.eval(tscript) # shouldn't raise
assert hasattr(sys, 'userSetup') and sys.userSetup == True
def cameraFrustum_build(cam_shape):
#make sure a camera is loaded
if cam_shape==0:
cmds.error('no camera loaded...select a camera and load')
else:
#create frustum only if one doesnt already exist
selCamXform = cmds.listRelatives(cam_shape[0], p=1)
prefix = 'frust_'
frustumGrpName = prefix + 'camera_frustum_all_grp'
if cmds.objExists(frustumGrpName)==0:
#create main grp
frustumMainGrp = cmds.group(em=1, n=frustumGrpName);
cmds.setAttr(frustumGrpName + '.tx', lock=1, keyable=0, channelBox=0)
cmds.setAttr(frustumGrpName + '.ty', lock=1, keyable=0, channelBox=0)
cmds.setAttr(frustumGrpName + '.tz', lock=1, keyable=0, channelBox=0)
cmds.setAttr(frustumGrpName + '.rx', lock=1, keyable=0, channelBox=0)
cmds.setAttr(frustumGrpName + '.ry', lock=1, keyable=0, channelBox=0)
cmds.setAttr(frustumGrpName + '.rz', lock=1, keyable=0, channelBox=0)
cmds.setAttr(frustumGrpName + '.sx', lock=1, keyable=0, channelBox=0)
cmds.setAttr(frustumGrpName + '.sy', lock=1, keyable=0, channelBox=0)
cmds.setAttr(frustumGrpName + '.sz', lock=1, keyable=0, channelBox=0)
cmds.setAttr(frustumGrpName + '.v', lock=1, keyable=0, channelBox=0)
#create frustum geo
frustumGeo = cmds.polyCube(w=2, h=2, d=2, n=prefix + 'camera_frustum_geo')
cmds.delete(frustumGeo[0], constructionHistory=True)
cmds.parent(frustumGeo[0], frustumMainGrp)
#load plugin "nearestPointOnMesh.mll" if needed and connect
plugin = cmds.pluginInfo('nearestPointOnMesh.mll', q=1, l=1)
if plugin==0:
cmds.loadPlugin('nearestPointOnMesh.mll')
nearNodeName = prefix + 'npomNode'
npomNode = cmds.createNode('nearestPointOnMesh', n=nearNodeName)
cmds.connectAttr(frustumGeo[0] + '.worldMesh', npomNode + '.inMesh')
#create clusters
cmds.select(frustumGeo[0] + '.vtx[4:7]', r=1)
nearCluster = cmds.cluster(n=prefix + 'camera_nearFrustum_cluster')
cmds.select(frustumGeo[0] + '.vtx[0:3]', r=1)
farCluster = cmds.cluster(n=prefix + 'camera_farFrustum_cluster')
#create near/far/camera locs
cameraLoc = cmds.spaceLocator(p=(0, 0, 0), n=prefix + 'camera_loc')
cmds.parent(cameraLoc[0], frustumMainGrp)
nearLoc = cmds.spaceLocator(p=(0, 0, 0), n=prefix + 'camera_nearFrustum_loc')
cmds.move(0, 0, -1)
farLoc = cmds.spaceLocator(p=(0, 0, 0), n=prefix + 'camera_farFrustum_loc')
cmds.move(0, 0, 1)
#parent clusters under loc -- parent locs under camera loc
cmds.parent(nearCluster[1], nearLoc[0])
cmds.parent(farCluster[1], farLoc[0])
cmds.parent(nearLoc[0], cameraLoc[0])
cmds.parent(farLoc[0], cameraLoc[0])
#constrain camera loc to camera
cmds.parentConstraint(selCamXform, cameraLoc, weight=1)
return frustumGeo[0]
def loadPlugin():
'''
Load edgFlowMirror plugin.
'''
if not mc.pluginInfo('edgeFlowMirror',q=True,l=True):
mc.loadPlugin('edgeFlowMirror')
return 1
def validateRenderer():
strPlugin = getPluginName()
if(len(strPlugin) == 0):
return False
# Most renderers are in plugins, so by locating that we indentify that the renderer is valid.
pluginLoaded = cmds.pluginInfo(strPlugin, q=True, l=True)
# Modo is not a plugin, so check separatly for that if we failed above.
if(pluginLoaded == False):
if cmds.getAttr('defaultRenderGlobals.ren') == 'modoRender':
pluginLoaded = True
if(pluginLoaded == False):
# Craft the error string (watching for modo special case).
if strPlugin == "ModoRender":
strError = strPlugin + " is not selected or registered - cannot support this renderer at this time"
else:
strError = strPlugin + ".mll plugin is not loaded - cannot support this renderer at this time"
cmds.scrollField("rendererErrorText", edit=True, text=strError)
return False
cmds.scrollField("rendererErrorText", edit=True, text="Maya plugin for Host Renderer detected")
return True
def setTool_hardSkinWeightBrush( evt=0 ):
appendPluginPath()
_cmdStr = """global string $tf_skinSmoothPatin_selection[];
global proc tf_smoothBrush( string $context )
{
artUserPaintCtx -e -ic "tf_init_smoothBrush"
-svc "tf_set_smoothBrushValue"
-fc "" -gvc "" -gsc "" -gac "" -tcc "" $context;
}
global proc tf_init_smoothBrush( string $name )
{
string $sel[] = `ls -sl -fl`;
string $obj[] = `ls -sl -o`;
sgSmoothWeightCommand $obj;
}
global proc tf_set_smoothBrushValue( int $slot, int $index, float $val )
{
sgSmoothWeightCommand -h 1 -i $index -w $val;
}
ScriptPaintTool;
artUserPaintCtx -e -tsc "tf_smoothBrush" `currentCtx`;"""
if not cmds.pluginInfo( 'sgSmoothWeightCommand', q=1, l=1 ):
cmds.loadPlugin( 'sgSmoothWeightCommand' )
mel.eval( _cmdStr )
def _deleteTurtleNodes(*args):
pluginName = 'Turtle'
dn = cmds.pluginInfo(pluginName,q=True,dn=True)
turtleNodes = cmds.ls(type=dn)
cmds.lockNode(turtleNodes,l=False)
cmds.delete(turtleNodes)
return 0
def get_mask():
if cmds.pluginInfo(PLUG_IN_NAME, q=True, loaded=True):
nodes = cmds.ls(type=NODE_NAME)
if len(nodes) > 0:
return nodes[0]
return None
def accept(self, settings, item):
"""
Method called by the publisher to determine if an item is of any
interest to this plugin. Only items matching the filters defined via the
item_filters property will be presented to this method.
A publish task will be generated for each item accepted here. Returns a
dictionary with the following booleans:
- accepted: Indicates if the plugin is interested in this value at
all. Required.
- enabled: If True, the plugin will be enabled in the UI, otherwise
it will be disabled. Optional, True by default.
- visible: If True, the plugin will be visible in the UI, otherwise
it will be hidden. Optional, True by default.
- checked: If True, the plugin will be checked in the UI, otherwise
it will be unchecked. Optional, True by default.
:param settings: Dictionary of Settings. The keys are strings, matching
the keys returned in the settings property. The values are `Setting`
instances.
:param item: Item to process
:returns: dictionary with boolean keys accepted, required and enabled
"""
accepted = True
publisher = self.parent
template_name = settings["Publish Template"].value
# SSE: we want this off by default when the UI starts, see also return
# below (DW 2020-07-28)
checked = False
# SSE: check that the Maya-to-Arnold 'mtoa' plug-in is available to
# allow ASS exports (DW 2020-07-28)
if not cmds.pluginInfo('mtoa', q=True, l=True):
self.logger.debug(
"Item not accepted because the Arnold plugin needed to export "
"Standins is not loaded!")
accepted = False
# ensure a work file template is available on the parent item
work_template = item.parent.properties.get("work_template")
if not work_template:
self.logger.debug(
"A work template is required for the session item in order to "
"publish an ASS file. Not accepting ASS item.")
accepted = False
# ensure the publish template is defined and valid and that we also have
publish_template = publisher.get_template_by_name(template_name)
if not publish_template:
self.logger.debug(
"The valid publish template could not be determined for the "
"ASS item. Not accepting the item.")
accepted = False
# we've validated the publish template. add it to the item properties
# for use in subsequent methods
item.properties["publish_template"] = publish_template
# because a publish template is configured, disable context change. This
# is a temporary measure until the publisher handles context switching
# natively.
item.context_change_allowed = False
return {"accepted": accepted, "checked": checked}
def on_action_create(self, *args):
sName = self.ui.edtNewName.text()
# loading Maya matrix node
if not (cmds.pluginInfo("decomposeMatrix", query=True, loaded=True)):
try: # Maya 2012
cmds.loadPlugin("decomposeMatrix.mll")
except:
try: # Maya 2013 or earlier
cmds.loadPlugin("matrixNodes.mll")
except:
print self.langDic[
self.langName]['e002_decomposeMatrixNotFound']
aSel = pymel.selected()
if (len(aSel) == 2):
#Create the container of the system data
pData = PoseReaderData()
with pymel.UndoChunk():
#Get Needed matrix information
pData.nParent = aSel[1]
pData.nChild = aSel[0]
m4ParentMat = pData.nParent.getMatrix(worldSpace=True)
m4ChildMat = pData.nChild.getMatrix(worldSpace=True)
#Create the two node needed to extract the rotation
pData.nPGrp = pymel.createNode("transform",
name=sName +
"_PoseReader_Parent_Grp",
p=pData.nParent)
pData.nPGrp.setMatrix(m4ChildMat, worldSpace=True)
pData.nParentLoc = self.createLoc(
sName + "_AngExtract_ParentLoc", pData.nPGrp)
pData.nCGrp = pymel.createNode("transform",
name=sName +
"_PoseReader_Child_Grp",
p=pData.nChild)
pData.nCGrp.setMatrix(m4ChildMat, worldSpace=True)
pData.nChildLoc = self.createLoc(
sName + "_AngExtract_ChildLoc", pData.nCGrp)
#Add usefull attributes for the tool
pData.nChildLoc.setDynamicAttr("posereaderdata", True)
pData.nChildLoc.addAttr("angleMaxValue", min=-360.0, max=360.0)
pData.nChildLoc.setAttr("angleMaxValue",
180,
edit=True,
keyable=False,
lock=False)
pData.nChildLoc.addAttr("axis", at="enum", enumName="X:Y:Z")
pData.nChildLoc.setAttr("axis",
1,
edit=True,
keyable=False,
lock=False)
#Setup the rotation extaction
pData.nMultM = pymel.createNode("multMatrix",
name=sName + "_ExtactAngle_MM")
pymel.connectAttr(pData.nChildLoc.worldMatrix[0],
pData.nMultM.matrixIn[0])
pymel.connectAttr(pData.nParentLoc.worldInverseMatrix[0],
pData.nMultM.matrixIn[1])
pData.nDecM = pymel.createNode("decomposeMatrix",
name=sName + "_ExtractAngle_DM")
pymel.connectAttr(pData.nMultM.matrixSum,
pData.nDecM.inputMatrix)
#Setup the rotation affection
pData.nMD = pymel.createNode("multiplyDivide",
name=sName + "_NormValue_MD")
pData.nMD.operation.set(2)
pymel.connectAttr(pData.nDecM.outputRotateY, pData.nMD.input1X)
pymel.connectAttr(pData.nChildLoc.angleMaxValue,
pData.nMD.input2X)
pData.nCD = pymel.createNode("condition",
name=sName + "_SmallerThanOne_CD")
pymel.connectAttr(pData.nMD.outputX, pData.nCD.firstTerm)
pymel.connectAttr(pData.nMD.outputX, pData.nCD.colorIfTrueR)
pData.nCD.secondTerm.set(1)
pData.nCD.operation.set(5) #Less or equal
pData.nCDNoNeg = pymel.createNode("condition",
name=sName + "_OverZero_CD")
pymel.connectAttr(pData.nCD.outColorR,
pData.nCDNoNeg.firstTerm)
pymel.connectAttr(pData.nCD.outColorR,
pData.nCDNoNeg.colorIfTrueR)
pData.nCDNoNeg.secondTerm.set(0)
pData.nCDNoNeg.colorIfFalseR.set(0)
pData.nCDNoNeg.operation.set(3) #Greater or Equal
#Node for manual activation connection
pData.nMDActive = pymel.createNode("multiplyDivide",
name=sName + "_Active_MD")
pymel.connectAttr(pData.nCDNoNeg.outColorR,
pData.nMDActive.input1X)
#for o in pData.__dict__:
#print o
libSerialization.export_network(pData)
self.addItem(pData)
else:
pymel.confirmDialog(
title='Selection Problem',
message='You need to have exactly two nodes selected')
def _pluginLoaded(*args):
global _pluginData
if len(args) > 1:
# 2009 API callback, the args are ( [ pathToPlugin, pluginName ], clientData )
pluginName = args[0][1]
else:
pluginName = args[0]
pluginName = _stripPluginExt(pluginName)
if not pluginName:
return
# Check to see if plugin is really loaded
if not (cmds.pluginInfo(pluginName, query=1, loaded=1)):
return
# Make sure there are no registered callbacks for this plug-in. It has been
# reported that some 3rd party plug-ins will enter here twice, causing a
# "callback id leak" which potentially leads to a crash. The reported
# scenario was:
# - Launching mayapy.exe
# - Opening a Maya scene having a requires statement (to the plug-in)
# - The plug-in imports pymel, causing initialization and entering here.
if (pluginName in _pluginData) and 'callbackId' in _pluginData[pluginName] \
and _pluginData[pluginName]['callbackId'] != None:
_api.MEventMessage.removeCallback(
_pluginData[pluginName]['callbackId'])
_logger.debug("Plugin loaded: %s", pluginName)
_pluginData[pluginName] = {}
# Commands
commands = _plugins.pluginCommands(pluginName)
if commands:
# clear out the command list first
_pluginData[pluginName]['commands'] = []
for funcName in commands:
try:
_addPluginCommand(pluginName, funcName)
except Exception as e:
_logger.error("Error adding command %s from plugin %s - %s" %
(funcName, pluginName, e))
_logger.debug(traceback.format_exc())
# Nodes
try:
mayaTypes = cmds.pluginInfo(pluginName, query=1, dependNode=1)
except Exception:
_logger.error("Failed to get depend nodes list from %s", pluginName)
mayaTypes = None
#apiEnums = cmds.pluginInfo(pluginName, query=1, dependNodeId=1)
if mayaTypes:
def addPluginPyNodes(*args):
try:
id = _pluginData[pluginName].get('callbackId')
except KeyError:
_logger.warning("could not find callback id!")
else:
if id is not None:
_api.MEventMessage.removeCallback(id)
if hasattr(id, 'disown'):
id.disown()
_pluginData[pluginName]['dependNodes'] = []
allTypes = set(cmds.ls(nodeTypes=1))
for mayaType in mayaTypes:
# make sure it's a 'valid' type - some plugins list node types
# that don't show up in ls(nodeTypes=1), and aren't creatable
# ...perhaps they're abstract types?
# Unfortunately, can't check this, as only plugin I know of
# that has such a node - mayalive, mlConstraint - is only
# available up to 2009, which has a bug with allNodeTypes...
# Oddly enough, mlConstraint WILL show up in allTypes here,
# but not after the plugin is loaded / callback finishes...?
if mayaType not in allTypes:
continue
_addPluginNode(pluginName, mayaType)
# Note - in my testing, a single _api.MFileIO.isReadingFile() call would
# also catch opening + referencing operations... but in commit
# 6e53d7818e9363d55d417c3a80ea7df94c4998ec, a check only against
# isReadingFile is commented out... so I'm playing it safe, and assuming
# there are edge cases where isOpeningFile is True but isReadingFile is
# not
# Detect if we are currently opening/importing a file and load as a callback versus execute now
if (_api.MFileIO.isReadingFile() or _api.MFileIO.isOpeningFile()
or _api.MFileIO.isReferencingFile()):
if _api.MFileIO.isReferencingFile():
_logger.debug(
"Installing temporary plugin-loaded nodes callback - PostSceneRead"
)
id = _api.MEventMessage.addEventCallback(
'PostSceneRead', addPluginPyNodes)
elif _api.MFileIO.isImportingFile():
_logger.debug(
"Installing temporary plugin-loaded nodes callback - SceneImported"
)
id = _api.MEventMessage.addEventCallback(
'SceneImported', addPluginPyNodes)
else:
# pre-2012 referencing operations will fall into this branch,
# which will not work (ie, pre-2012, plugins loaded due to
# reference loads will not trigger adding of that plugin's
# PyNodes).
# While this is obviously less than ideal, no 2011 versions were
# available for testing when I made the fix for 2012+, and we
# decided that making nothing worse would be better than
# potentially introducing problems/instabilities (ie, see
# messages in commits 6e53d7818e9363d55d417c3a80ea7df94c4998ec
# and 81bc5ee28f1775a680449fec8724e21e703a52b8).
_logger.debug(
"Installing temporary plugin-loaded nodes callback - SceneOpened"
)
id = _api.MEventMessage.addEventCallback(
'SceneOpened', addPluginPyNodes)
_pluginData[pluginName]['callbackId'] = id
# scriptJob not respected in batch mode, had to use _api
#cmds.scriptJob( event=('SceneOpened',doSomethingElse), runOnce=1 )
else:
_logger.debug("Running plugin-loaded nodes callback")
# add the callback id as None, so addPluginPyNodes SHOULD know that
# SOMETHING is always in _pluginData[pluginName]['callbackId'], and
# if there isn't, then something is wrong...
_pluginData[pluginName]['callbackId'] = None
addPluginPyNodes()
def pluginLoaded():
if os.name != 'posix':
return cmds.pluginInfo('MayaCollabPlugin', query=True, loaded=True)
else:
return cmds.pluginInfo('libMayaCollabPlugin', query=True, loaded=True)
""" Apply Redshift wireframe shader to selected objects @Guilherme Trevisan - [email protected] - 2020-11-04 1.0 - 2020-11-04 Initial Release """ import maya.cmds as cmds redshift_plugin = 'redshift4maya' # Load Redshift if not cmds.pluginInfo(redshift_plugin, q=True, loaded=True): try: cmds.loadPlugin(redshift_plugin) except: message = '<span style=\"color:#FF0000;text-decoration:underline;\">Redshift</span> doesn\'t seem to be installed.' cmds.inViewMessage(amg=message, pos='botLeft', fade=True, alpha=.9) is_redshift_available = False if cmds.pluginInfo(redshift_plugin, q=True, loaded=True): is_redshift_available = True def create_wireframe_node(destination_input): rs_wireframe_node = cmds.createNode("RedshiftWireFrame") cmds.connectAttr(rs_wireframe_node + '.outColor', destination_input, force=True)
def k_checkassfiles(self):
#maya节点返回的路径
kassdso = []
#记录文件夹内里的文件，避免重复对网络进行获取
kassfilepath = {}
self.kexpo = r'(.*?)([\._])([#]*)([\.]?)([#]*)(\.ass\.gz|\.ass|\.obj|\.ply|\.asstoc)$'
#self.kexpo2 = r'(.*?)([\._])([0-9#]*)([\.]?)([0-9#]*)(\.ass\.gz|\.ass|\.obj|\.ply)$'
if cc.pluginInfo("mtoa", q=1, l=1):
version = cc.pluginInfo("mtoa", q=1, v=1)
self.mayaplugin_version.update({'Arnold': version})
kassmeshs = cc.ls(type='aiStandIn')
for kassmesh in kassmeshs:
#先判断是否无下游输出的节点
krassmesh = cc.listConnections(kassmesh, s=0, d=1)
#kcassmesh=cc.listConnections((kassmesh+'.transOp'),s=0,d=1)
if krassmesh:
#print 'kassmesh '+str(kassmesh)
assdsom = cc.getAttr(kassmesh + '.dso')
#判断是否为绝对路径
if assdsom and not os.path.isabs(assdsom):
assdso = self.projectDir + assdsom
assdso = assdsom.replace('\\', '/')
#获取 缓存名 与 路径
assmesh_getpath = os.path.basename(assdso)
#print 'assdso '+str(assdso)
assmeshpath = os.path.dirname(assdso)
#print 'assmeshpath '+str(assmeshpath)
#先判断有无重复检查
if assdsom and not assdsom in kassdso:
kassdso.append(assdsom)
#如果路径出现过
if assmeshpath in kassfilepath:
#k_filterseq=[]
#asspathfiles=os.listdir(assmeshpath)
asspathfiles = kassfilepath[assmeshpath]
#print 'asspathfiles '+str(asspathfiles)
krseqfile = self.k_filterassfile(
assdso, asspathfiles, kassmesh)
#self.kassfiles.append(krseqfile)
else:
asspathfiles = []
#判断是否能根据文件夹 返回 文件夹里面的所有文件
try:
asspathfiles = os.listdir(assmeshpath)
except WindowsError:
#print e.message
pass
#print 'asspathfiles '+str(asspathfiles)
krseqfile = self.k_filterassfile(
assdso, asspathfiles, kassmesh)
#self.kassfiles.append(krseqfile)
k_update = {assmeshpath: asspathfiles}
kassfilepath.update(k_update)
def k_checkTexfiles(self):
texfiles = cc.ls(type='file')
for texfile in texfiles:
#判断有无自定义属性
userAttrs = cc.listAttr(texfile, ud=1)
if userAttrs:
#获取有无UDIM模式
ktexmode = cc.getAttr(texfile + '.uvTilingMode')
#如果无：
if not ktexmode:
for userAttr in userAttrs:
#判断自定义内容是否 Tex 开头
if userAttr[:3] == 'Tex':
#获取自定义属性的 内容
userTex = cc.getAttr(texfile + "." + userAttr)
#设置节点内容 及 加入到节点数据
ktemp = {'path': userTex, 'userAttr': userAttr}
if self.kNodedate.has_key('kmayaTex_userTex'):
if self.kNodedate['kmayaTex_userTex'].has_key(
texfile):
self.kNodedate['kmayaTex_userTex'][
texfile].append(ktemp)
else:
self.kNodedate['kmayaTex_userTex'].update(
{texfile: [ktemp]})
else:
self.kNodedate['kmayaTex_userTex'] = {
texfile: [ktemp]
}
#添加入总数组
if userTex and not userTex in self.kmayaTex:
if os.path.exists(userTex):
#print texfile
self.kmayaTex.append(userTex)
#print userTex
userTex_tx = os.path.splitext(
userTex)[0] + '.tx'
if os.path.exists(
userTex_tx
) and not userTex_tx in self.kmayaTex:
self.kmayaTex.append(userTex_tx)
#print userTex_tx
#有UDIM模式
else:
for userAttr in userAttrs:
#判断自定义内容是否 Tex 开头
if userAttr[:3] == 'Tex':
userTex = cc.getAttr(texfile + "." + userAttr)
#设置节点内容 及 加入到节点数据
ktemp = {'path': userTex, 'userAttr': userAttr}
if self.kNodedate.has_key('kmayaTex_userTex'):
if self.kNodedate['kmayaTex_userTex'].has_key(
texfile):
self.kNodedate['kmayaTex_userTex'][
texfile].append(ktemp)
else:
self.kNodedate['kmayaTex_userTex'].update(
{texfile: [ktemp]})
else:
self.kNodedate['kmayaTex_userTex'] = {
texfile: [ktemp]
}
#获取自定义内容 的UDIM贴图
k_getUDIMp = k.getFilePatternString(
userTex, False, ktexmode)
k_exudims = k.findAllFilesForPattern(
k_getUDIMp, None)
#添加贴图入总数组
for k_exudim in k_exudims:
if k_exudim and not k_exudim in self.kmayaTex:
#print texfile
self.kmayaTex.append(k_exudim)
#print k_exudim
k_exudim_tx = os.path.splitext(
k_exudim)[0] + '.tx'
if os.path.exists(
k_exudim_tx
) and not k_exudim_tx in self.kmayaTex:
self.kmayaTex.append(k_exudim_tx)
#print k_exudim_tx
else:
ktexfile = cc.getAttr(texfile + '.fileTextureName')
ktexmode = cc.getAttr(texfile + '.uvTilingMode')
#设置节点内容 及 加入到节点数据
ktemp = {'path': ktexfile}
if self.kNodedate.has_key('kmayaTex_default'):
self.kNodedate['kmayaTex_default'].update(
{texfile: [ktemp]})
else:
self.kNodedate['kmayaTex_default'] = {texfile: [ktemp]}
if not ktexmode:
if ktexfile and not os.path.isabs(ktexfile):
ktexfile = self.projectDir + ktexfile
ktexfile = ktexfile.replace('\\', '/')
if ktexfile and not ktexfile in self.kmayaTex:
if os.path.exists(ktexfile):
#print texfile
self.kmayaTex.append(ktexfile)
#print ktexfile
ktexfile_tx = os.path.splitext(ktexfile)[0] + '.tx'
if os.path.exists(
ktexfile_tx
) and not ktexfile_tx in self.kmayaTex:
self.kmayaTex.append(ktexfile_tx)
#print ktexfile_tx
else:
if ktexfile and not os.path.isabs(ktexfile):
ktexfile = self.projectDir + ktexfile
ktexfile = ktexfile.replace('\\', '/')
#maya内部UDIM命令
k_getUDIMp = k.getFilePatternString(
ktexfile, False, ktexmode)
k_exudim = k.findAllFilesForPattern(k_getUDIMp, None)
for ktexfile in k_exudim:
if ktexfile and not ktexfile in self.kmayaTex:
#print texfile
self.kmayaTex.append(ktexfile)
#print ktexfile
ktexfile_tx = os.path.splitext(ktexfile)[0] + '.tx'
if os.path.exists(
ktexfile_tx
) and not ktexfile_tx in self.kmayaTex:
self.kmayaTex.append(ktexfile_tx)
#print ktexfile_tx
#先判断插件有没开，防止找不到节点类型
if cc.pluginInfo("mtoa", q=1, l=1):
aiTexfiles = cc.ls(type='aiImage')
if aiTexfiles:
for aiTexfile in aiTexfiles:
#返回文件路径
aiTexfilesname = cc.getAttr(aiTexfile + '.filename')
#判断是否为空 及 在总数组有无重复 及 文件是否存在
if aiTexfilesname and not aiTexfilesname in self.kaiTex:
if os.path.exists(aiTexfilesname):
#print aiTexfilesname
self.kaiTex.append(aiTexfilesname)
#判断此文件有无tx版本的路径
aiTexfilesname_tx = os.path.splitext(
aiTexfilesname)[0] + '.tx'
#判断文件是否存在 及 在总数组有无重复
if os.path.exists(
aiTexfilesname_tx
) and not aiTexfilesname_tx in self.kaiTex:
self.kaiTex.append(aiTexfilesname_tx)
#print aiTexfilesname_tx
#先判断插件有没开，防止找不到节点类型
if cc.pluginInfo("vrayformaya", q=1, l=1):
Vptexfiles = cc.ls(type='VRayPtex')
if Vptexfiles:
for Vptexfile in Vptexfiles:
#返回文件路径
Vptexfilename = cc.getAttr(Vptexfile + '.ptexFile')
#判断是否为空 及 在总数组有无重复 及 文件是否存在
if Vptexfilename and not Vptexfilename in self.kVpTex:
if os.path.exists(Vptexfilename):
#print Vptexfilename
self.kaiTex.append(Vptexfilename)
#判断此文件有无tx版本的路径
Vptexfilename_tx = os.path.splitext(
Vptexfilename)[0] + '.tx'
#判断文件是否存在 及 在总数组有无重复
if os.path.exists(
Vptexfilename_tx
) and not Vptexfilename_tx in self.kaiTex:
self.kaiTex.append(Vptexfilename_tx)
#print Vptexfilename_tx
self.kTexture = list(set(self.kmayaTex + self.kaiTex + self.kVpTex))
def k_checkYeticache(self):
#缓存匹配公式
self.kexpo3 = r'(.*?)([\.]?)([%][0-9]*d)(\.fur)$'
#贴图匹配公式
self.kexpo4 = r'(.*?)([\.]?)([%][0-9]*d)(\.png|\.tif|\.exr)$'
self.kexpu4 = r'(.*)(\.png|\.tif|\.exr)$'
#节点返回的路径存放地 为了不重复检查
if cc.pluginInfo("pgYetiMaya", q=1, l=1):
yetis = cc.ls(type='pgYetiMaya')
version = cc.pluginInfo("pgYetiMaya", q=1, v=1)
self.mayaplugin_version.update({'Yeti': version})
for yeti in yetis:
yeticache = cc.getAttr(yeti + '.cacheFileName')
#判断是否绝对路径
if yeticache and not os.path.isabs(yeticache):
yeticache = self.projectDir + yeticache
if yeticache:
#设置节点内容 及 加入到节点数据
ktemp = {'path': yeticache}
if self.kNodedate.has_key('kYeticache'):
self.kNodedate['kYeticache'].update({yeti: [ktemp]})
else:
self.kNodedate['kYeticache'] = {yeti: [ktemp]}
#获取 缓存名 与 路径
yeticache_name = os.path.basename(yeticache)
yeticache_dir = os.path.dirname(yeticache)
pattern = re.search(self.kexpo3, yeticache)
if pattern:
try:
#返回路径下的所谓文件
yeticachefiles = os.listdir(yeticache_dir)
for yeticachefile in yeticachefiles:
#print yeticachefile
#匹配
kexpc = r'%s%s([0-9]*)(\.fur)$' % (
pattern.group(1), pattern.group(2))
#判断是否在盘的根目录 防止出现E：//xxxxx 这种情况
if yeticache_dir[-2:] == ':/':
yeticachefilef = yeticache_dir + yeticachefile
else:
yeticachefilef = yeticache_dir + '/' + yeticachefile
pattern2 = re.search(kexpc, yeticachefilef)
if pattern2 and not yeticachefilef in self.kYeticache:
self.kYeticache.append(yeticachefilef)
#print yeticachefilef
except:
#print e.message
pass
else:
#非序列的文件
if os.path.exists(
yeticache
) and not yeticache in self.kYeticache:
self.kYeticache.append(yeticache)
#print yeticache
#pgYetiGraph为 yeti提供的mel
try:
yetiTexs = cc.pgYetiGraph(yeti,
listNodes=True,
type='texture')
if yetiTexs:
for yetiTex in yetiTexs:
#获取yeti Graph里面的节点 及 参数
yetiTexfile = cc.pgYetiGraph(yeti,
node=yetiTex,
param='file_name',
getParamValue=True)
if yetiTexfile and not os.path.isabs(yetiTexfile):
yetiTexfile = self.projectDir + yetiTexfile
yetiTexfile = yetiTexfile.replace('\\', '/')
if yetiTexfile:
#设置节点内容 及 加入到节点数据
ktemp = {
'path': yetiTexfile,
'texNode': yetiTex
}
if self.kNodedate.has_key('kYetitex'):
#一个maya节点内 如果有多个 Yeti贴图节点 用数组添加法
if self.kNodedate['kYetitex'].has_key(
yeti):
self.kNodedate['kYetitex'][
yeti].append(ktemp)
else:
self.kNodedate['kYetitex'].update(
{yeti: [ktemp]})
else:
self.kNodedate['kYetitex'] = {
yeti: [ktemp]
}
yetiTex_name = os.path.basename(yetiTexfile)
yetiTex_dir = os.path.dirname(yetiTexfile)
patternt = re.search(self.kexpo4, yetiTexfile)
#匹配是否为序列格式
if patternt:
try:
YetiTexfiles = os.listdir(yetiTex_dir)
for YetiTexfile in YetiTexfiles:
#print yeticachefile
kexpt = r'%s%s([0-9]*)(\.png|\.tif|\.exr)$' % (
patternt.group(1),
patternt.group(2))
#判断是否在盘的根目录 防止出现E：//xxxxx 这种情况
if yetiTex_dir[-2:] == ':/':
YetiTexfilef = yetiTex_dir + YetiTexfile
else:
YetiTexfilef = yetiTex_dir + '/' + YetiTexfile
#匹配完整路径格式
pattern = re.search(
kexpt, YetiTexfilef)
if pattern and not YetiTexfilef in self.kYetitex:
self.kYetitex.append(
YetiTexfilef)
print YetiTexfilef
except:
#print e.message
pass
else:
if os.path.exists(
yetiTexfile
) and not yetiTexfile in self.kYeticache:
#匹配yeti支持的图片格式
patternt = re.search(
self.kexpu4, yetiTexfile)
if patternt and not yetiTexfile in self.kYetitex:
self.kYetitex.append(yetiTexfile)
print yetiTexfile
except:
pass
self.kYeti = list(set(self.kYeticache + self.kYetitex))
def updatePluginList(self):
self._pluginList = cmds.pluginInfo(q=1, listPlugins=1)
def initializePlugin(mobject):
global rendererModules
global generalNodeModules
global shadingNodeGroups
global translatorModules
mplugin = OpenMayaMPx.MFnPlugin(mobject, kPluginCompany, "1.0", "Any")
# Load needed plugins
neededPlugins = ["objExport", "OpenEXRLoader"]
for neededPlugin in neededPlugins:
try:
if not cmds.pluginInfo(neededPlugin, query=True, loaded=True):
cmds.loadPlugin(neededPlugin)
print("%s - Loaded plugin : %s" %
(kPluginName, neededPlugin))
except:
sys.stderr.write("Failed to load %s plugin\n" % neededPlugin)
raise
# Register translator nodes
try:
for translatorModule in translatorModules:
if translatorModule:
moduleName = os.path.split(
inspect.getfile(translatorModule))[-1].split('.')[0]
translatorOptions = None
if translatorModule.kPluginTranslatorOptionsUIFunction:
translatorOptions = createMelPythonCallback(
moduleName,
translatorModule.kPluginTranslatorOptionsUIFunction,
parametersList=[('string', 'parent'),
('string', 'action'),
('string', 'initialSettings'),
('string', 'resultCallback')],
returnType="int")
mplugin.registerFileTranslator(
translatorModule.kPluginTranslatorTypeName, None,
translatorModule.translatorCreator, translatorOptions,
translatorModule.kPluginTranslatorDefaultOptions)
print(
"%s - Registered translator : %s" %
(kPluginName, translatorModule.kPluginTranslatorTypeName))
except:
sys.stderr.write(
"%s - Failed to register node: %s\n" %
(kPluginName, translatorModule.kPluginTranslatorTypeName))
raise
# Register general nodes
try:
for generalNodeModule in generalNodeModules:
mplugin.registerNode(generalNodeModule.kPluginNodeName,
generalNodeModule.kPluginNodeId,
generalNodeModule.nodeCreator,
generalNodeModule.nodeInitializer,
OpenMayaMPx.MPxNode.kDependNode)
print("%s - Registered node : %s" %
(kPluginName, generalNodeModule.kPluginNodeName))
except:
sys.stderr.write("%s - Failed to register node: %s\n" %
(kPluginName, generalNodeModule.kPluginNodeName))
raise
# Register materials, textures, volumes, lights
for shadingModule, shadingNodeNames in shadingNodeGroups.iteritems():
#print( "%s - Registering %s nodes" % (kPluginName, shadingModule) )
for shadingNodeName in shadingNodeNames:
try:
#print( "Registering %s" % shadingNodeName )
node = None
try:
__import__(shadingModule, fromlist=[shadingNodeName])
module = sys.modules[shadingModule + '.' + shadingNodeName]
reload(module)
node = module
except ImportError:
OpenMaya.MGlobal.displayError(
"Failed to load %s" %
(shadingModule + '.' + shadingNodeName))
# abstract node classes should return None in nodeName() method
if node:
isNode = node.kPluginNodeName
if isNode is None:
#print( "isNode == None" )
continue
mplugin.registerNode(node.kPluginNodeName, node.kPluginNodeId,
node.nodeCreator, node.nodeInitializer,
OpenMayaMPx.MPxNode.kDependNode,
node.kPluginNodeClassify)
PBRTRenderer.registMaterialNodeType(node.kPluginNodeName)
print("%s - Registered %s : %s" %
(kPluginName, shadingModule, node.kPluginNodeName))
except:
sys.stderr.write("%s - Failed to register node: %s\n" %
(kPluginName, shadingNodeName))
raise
# Register Renderer commands
for rendererModule in rendererModules:
try:
mplugin.registerCommand(rendererModule.kPluginCmdName,
rendererModule.cmdCreator)
print("%s - Registered command : %s" %
(kPluginName, rendererModule.kPluginCmdName))
except:
sys.stderr.write("%s - Failed to register command: %s\n" %
(kPluginName, rendererModule.kPluginCmdName))
raise
# Register Renderers
for rendererModule in rendererModules:
try:
rendererModule.registerRenderer()
print("%s - Registered renderer : %s" %
(kPluginName, rendererModule.kPluginCmdName))
except:
sys.stderr.write("%s - Failed to register renderer: %s\n" %
(kPluginName, rendererModule.kPluginCmdName))
raise
plugin_list = [
'GamePipeline', 'MayaMuscle', 'redshift4maya', 'bifrostvisplugin',
'dx11Shader', 'Mayatomr', 'BifrostMain', 'deformerEvaluator',
'shaderFXPlugin', 'bifrostshellnode', 'gameFbxExporter',
'GPUBuiltInDeformer', 'stereoCamera', 'lookdevKit', 'Unfold3D', 'Type',
'poseDeformer', 'fbxmaya', 'poseReader', 'modelingToolkit', 'OneClick',
'AbcImport', 'AbcExport', 'AbcBullet'
]
logging('initializing maya')
try:
mel.eval("source UserSetupStand.mel")
execfile('%s//userSetup.py' % (os.environ['myDocPath']))
loaded_plugins = cmds.pluginInfo(query=True, listPlugins=True)
for p in plugin_list:
if p not in loaded_plugins:
cmds.loadPlugin(p)
except Exception, e:
exitstand(str(repr(e)))
logging('maya initialized')
'''
This function unlocks and loads references in the maya file.
'''
def unLocknLoadReferences():
badRefs = ['sharedReferenceNode', '_UNKNOWN_REF_NODE_']
###############################################################################
##
# @file kmAnimImpExp.py
# @brief AnimファイルとSelectファイル同時書き出し
# @version 1.0.1
# @date 2016/04/23
# @note - edit
# - cleanup
# @todo
#
###############################################################################
import os
import maya.cmds as mc
import maya.mel as mm
###############################################################################
if not mc.pluginInfo("animImportExport",q=True,loaded=True):
mc.loadPlugin( 'animImportExport' )
mc.pluginInfo( 'animImportExport', edit=True, autoload=True )
###############################################################################
def main():
mc.python('from kmAnimImpExp import *')
if mc.window( 'AnimImpExpUI', exists=True ):
mc.deleteUI('AnimImpExpUI')
WinName = mc.window(
'AnimImpExpUI',
title='Anim Import/Export with select',
iconName='AnimImpExpUI',
width=100,
height=200,
def renderThumbs(checkBoxLow, checkBoxMid, checkBoxHigh, checkBoxRenderRegion,
intField_res, floatField_thrhld, *args):
global cancel
cams = cmds.ls(type="camera")
cancel = 0
popup_win = 0
no_cam_set_list = []
cmds.loadPlugin('vrayformaya', quiet=True)
cmds.pluginInfo('vrayformaya', edit=True, autoload=True)
cmds.setAttr("defaultRenderGlobals.ren", "vray", type="string")
curLay = cmds.editRenderLayerGlobals(currentRenderLayer=True, query=True)
changeLay = curLay
rls = cmds.ls(type="renderLayer")
renCams = cmds.ls(type="camera")
renCam = "persp"
lowBut = cmds.checkBox(checkBoxLow, value=True, query=True)
midBut = cmds.checkBox(checkBoxMid, value=True, query=True)
highBut = cmds.checkBox(checkBoxHigh, value=True, query=True)
globopt_cache_geom_plugins = cmds.getAttr(
'vraySettings.globopt_cache_geom_plugins')
#print 'globopt_cache_geom_plugins = ',globopt_cache_geom_plugins
print " "
print "-- batch_review --"
res = cmds.intField(intField_res, v=True, query=True)
thr = cmds.floatField(floatField_thrhld, v=True, query=True)
if lowBut == 1:
cmds.setAttr("vraySettings.dmcThreshold", thr)
cmds.setAttr("vraySettings.width", res)
cmds.setAttr("vraySettings.height", res)
cmds.setAttr("vraySettings.globopt_cache_geom_plugins", 1)
cmds.setAttr("vraySettings.globopt_ray_maxIntens_on", 1)
#cmds.setAttr('vraySettings.globopt_cache_geom_plugins',globopt_cache_geom_plugins)
print " "
print "---"
print "quality = %s, dmcThreshold = %s" % (res, thr)
if midBut == 1:
cmds.setAttr("vraySettings.dmcThreshold", thr)
cmds.setAttr("vraySettings.width", res)
cmds.setAttr("vraySettings.height", res)
cmds.setAttr("vraySettings.globopt_cache_geom_plugins", 1)
cmds.setAttr("vraySettings.globopt_ray_maxIntens_on", 1)
#cmds.setAttr('vraySettings.globopt_cache_geom_plugins',globopt_cache_geom_plugins)
print " "
print "---"
print "quality = %s, dmcThreshold = %s" % (res, thr)
if highBut == 1:
cmds.setAttr("vraySettings.dmcThreshold", thr)
cmds.setAttr("vraySettings.width", res)
cmds.setAttr("vraySettings.height", res)
cmds.setAttr("vraySettings.globopt_cache_geom_plugins", 1)
cmds.setAttr("vraySettings.globopt_ray_maxIntens_on", 1)
#cmds.setAttr('vraySettings.globopt_cache_geom_plugins',globopt_cache_geom_plugins)
print " "
print "---"
print "quality = %s, dmcThreshold = %s" % (res, thr)
print "--- "
print " "
for rl in rls:
found_cam = 0
if rl != "defaultRenderLayer" and cancel == 0:
rlState = cmds.getAttr(rl + ".renderable")
if rlState == 1:
print ' '
print "rende layer = ", rl
cmds.editRenderLayerGlobals(currentRenderLayer=rl)
for cam in cams:
camState = cmds.getAttr(cam + ".renderable")
if camState == 1:
rrState = cmds.checkBox(checkBoxRenderRegion,
value=True,
query=True)
reg = cmds.vray("vfbControl", "-getregion")
if rrState == 0:
cmds.vray("vfbControl", "-setregion", "reset")
if rrState == 1:
cmds.vray("vfbControl", "-setregionenabled", 1)
cmds.vray("vfbControl", "-setregion", reg[0],
reg[1], reg[2], reg[3])
mayaString = "renderWindowRenderCamera render renderView " + cam
print 'using ' + cam + ' for ' + rl
maya.mel.eval(mayaString)
cmds.vray("vfbControl", "-historysave")
cmds.vray("vfbControl", "-historyselect", 0)
#dte = datetime.now().strftime('%H:%M:%S')
dte = datetime.now().strftime('%H:%M')
editStr = rl + "," + cam
cmds.vray("vfbControl", "-historycomment", editStr)
print " "
found_cam = 1
if found_cam == 0:
print 'no camera link found, using persp cam for ', rl
cam = 'persp'
rrState = cmds.checkBox(checkBoxRenderRegion,
value=True,
query=True)
reg = cmds.vray("vfbControl", "-getregion")
if rrState == 0:
cmds.vray("vfbControl", "-setregion", "reset")
if rrState == 1:
cmds.vray("vfbControl", "-setregionenabled", 1)
cmds.vray("vfbControl", "-setregion", reg[0], reg[1],
reg[2], reg[3])
mayaString = "renderWindowRenderCamera render renderView " + cam
maya.mel.eval(mayaString)
cmds.vray("vfbControl", "-historysave")
cmds.vray("vfbControl", "-historyselect", 0)
dte = datetime.now().strftime('%H:%M:%S')
editStr = rl + "," + cam
cmds.vray("vfbControl", "-historycomment", editStr)
popup_win = 1
no_cam_set_list.append(rl)
def abcoutput(arg):
filename = os.path.basename(os.path.splitext(cmds.file(expandName=1,q=1))[0])
path =cmds.textField('pathnum',tx=1,q=1).replace("\\","/")
rangea =cmds.textField('rangenuma',tx=1,q=1)
rangeb =cmds.textField('rangenumb',tx=1,q=1)
rangesam =cmds.textField('rangesamnum',tx=1,q=1)
geocb=cmds.checkBox("geonlycb" ,q=True,v=True)
furcb = cmds.checkBox("furonlycb" ,q=True,v=True)
if cmds.pluginInfo("AbcExport",q=1,loaded=1,name=1)==0:
try:
cmds.loadPlugin("AbcExport")
except:
pass
if os.path.exists(path):
sels = cmds.ls(sl=1)
yeticols =[]
yetiAss =[]
locatercols = []
geoout = []
if sels!=[]:
for sel in sels:
locsels = [ y for y in cmds.listRelatives(sel,c=1) if y.find("arnold_loc")!=-1 and cmds.getAttr(y+".visibility")==1]
yetiselgrps = [ y for y in cmds.listRelatives(sel,c=1) if y.find("yeti_G")!=-1]
if geocb==1:
geodels = []
Miajudge = sel.find('Miarmy_Contents')
if Miajudge ==-1:
geogrps = [ y for y in cmds.listRelatives(sel,c=1) if y.find("_geo")!=-1]
else:
Agent =[a for a in cmds.listRelatives(sel,c=1) if a.find('Agent')!=-1]
if Agent!=[]:
geogrps = [b for b in cmds.listRelatives(Agent[0],c=1) if b.find('Geometry')!=-1]
else:
geogrps = []
if geogrps!=[]:
for geogrp in geogrps:
if cmds.getAttr(geogrp+".visibility")==0:
try:
cmds.setAttr(geogrp+".visibility",1)
except:
cmds.warning(geogrp+".visibility cant be set!!")
#mainCtrl
if cmds.listConnections(geogrp,d=0,type="transform")!=None:
mainctrl =[m for m in cmds.listConnections(geogrp,d=0,type="transform") if m.find("Main")!=-1]
if mainctrl!=[]:
mainFurAttrs =[f for f in cmds.listAttr(mainctrl[0],k=1) if f in['hair','yeti','hairYeti']]
if mainFurAttrs!=[]:
for mainFurAttr in mainFurAttrs:
if cmds.getAttr(mainctrl[0]+'.'+mainFurAttr)!=1:
cmds.setAttr(mainctrl[0]+'.'+mainFurAttr,1)
#geoall
geoalls =[a for a in cmds.listRelatives(geogrp,ad=1) if cmds.nodeType(a)=="transform"]
for geoall in geoalls:
if cmds.listConnections(geoall+".visibility",type="animCurve")==None:
if cmds.getAttr(geoall+".visibility")==False:
geodels.append(geoall)
geoout.append(geogrp)
if geodels !=[]:
if cmds.objExists(str(geogrps[0]+"_del"))==True:
cmds.rename(str(geogrps[0]+"_del"),str(geogrp[0]+"_tmp"))
cmds.parent(geodels,w=1)
cmds.group(geodels,name=str(geogrps[0]+"_del"))
else:
cmds.parent(geodels,w=1)
cmds.group(geodels,name=str(geogrps[0]+"_del") )
#bake blender
try:
blctrl = sel[:len(sel.split(":")[-1])]+":key_Ani"
except:
blctrl = []
if blctrl!=[]:
if cmds.objExists(blctrl):
blnode = [ bln for bln in cmds.hyperShade(listDownstreamNodes =blctrl) if cmds.nodeType(bln)=="blendColors"]
cmds.bakeResults(blnode,simulation=1,t=rangea+":"+rangeb,sampleBy = int(rangesam))
if furcb==1:
locatercols += locsels
if yetiselgrps!=[]:
yetishowgrps = [yt for yt in cmds.listRelatives(yetiselgrps,c=1) if yt.find("yeti_show_G")!=-1]
yetinodes =cmds.listRelatives(yetishowgrps,c=1)
if yetinodes!=None:
for yetinode in yetinodes:
if cmds.getAttr(yetinode+".visibility")==True:
if cmds.getAttr(cmds.listRelatives(yetinode,p=1)[0]+".visibility")==True:
yeticols.append(yetinode)
if geocb==False:
geoout=[]
if furcb==False:
yeticols=[]
locatercols=[]
#output abc
cmds.select(geoout,r=1)
abcname ="-frameRange {0} {1} -uvWrite -worldSpace -writeVisibility -dataFormat hdf".format(rangea,rangeb)
for ou in range(len(geoout)):
abcname = abcname+" -root "+geoout[ou]
if abcname!="-frameRange {0} {1} -uvWrite -worldSpace -writeVisibility -dataFormat hdf".format(rangea,rangeb):
abcoutputfurpath = path+"/"+filename+".abc"
nn=1
while os.path.exists(abcoutputfurpath)==True:
abcoutputfurpath = path+"/"+filename+"_"+str(nn)+".abc"
nn =nn+1
cmds.AbcExport(j = abcname+" -file {0}".format(abcoutputfurpath))
#output yeticache
if yeticols!=[]:
yeticachename = yeticols[0].replace(":","__")
cmds.select(yeticols,r=1)
cmds.pgYetiCommand(flushGeometryCache=1)
cmds.pgYetiCommand(flushTextureCache=1)
cmds.pgYetiCommand(flushDisplayCache=1)
if os.path.exists(path+"/yetiAss")==False:
os.mkdir(path+"/yetiAss")
cmds.select(yeticols,r=1)
cmds.arnoldExportAss(f=path+"/yetiAss/"+yeticachename+".ass",s=1,expandProcedurals=1,startFrame=int(rangea),endFrame=int(rangeb),frameStep=int(rangesam),lightLinks=0,compressed=1,boundingBox=1,shadowLinks=0,mask=24,cam='perspShape')
mtoa.core.createStandIn(path+"/yetiAss/"+yeticachename+r".####.ass.gz")
assShape = cmds.ls(sl=1,type="aiStandIn")
cmds.expression(s =assShape[0]+ ".frameNumber=frame")
yetiAss = cmds.listRelatives(assShape[0],p=1)
print "已输出"+str(len(yeticols))+"个毛发节点!!",
#bak hairAss locater
if locatercols!=[]:
for locatercol in locatercols:
locaterAttrs = cmds.listAttr(locatercol,v=1,k=1)
for locaterAttr in locaterAttrs:
lockjudge = cmds.getAttr(locatercol+"."+locaterAttr,l=1)
if lockjudge==1:
cmds.setAttr(locatercol+"."+locaterAttr,l=0)
pm.bakeResults(locatercols,simulation=1,t=rangea+":"+rangeb,sampleBy = int(rangesam))
for locatercol in locatercols:
parentCons = cmds.listRelatives(locatercol,c=1,type=("parentConstraint","scaleConstraint"))
cmds.delete(parentCons)
lacattrv = cmds.listConnections(locatercol+".visibility",d=0,plugs=1)
if lacattrv!=[]:
cmds.disconnectAttr(lacattrv[0],locatercol+".visibility")
cmds.parent(locatercols,w=1)
if yetiAss!=[] and locatercols!=[]:
rmparentCons(filename,"Ass_G",locatercols)
furcachegrp = cmds.group(yetiAss,filename+"_Ass_G",name=filename+"_furCache_G")
cmds.select(furcachegrp,r=1,hi=1)
cmds.rename(yetiAss[0],filename+"_yetiAss_Aist")
outputfurpath = path+"/"+filename+"_fur.mb"
nn=1
while os.path.exists(outputfurpath)==True:
outputfurpath = path+"/"+filename+"_fur_"+str(nn)+".mb"
nn =nn+1
cmds.file(outputfurpath,force = 1,options ='v=0;' ,typ = 'mayaBinary',pr=1,es=1 )
elif locatercols!=[]:
rmparentCons(filename,"Ass_G",locatercols)
furcachegrp = cmds.group(filename+"_Ass_G",name=filename+"_furCache_G")
cmds.select(furcachegrp,r=1,hi=1)
outputfurpath = path+"/"+filename+"_fur.mb"
nn=1
while os.path.exists(outputfurpath)==True:
outputfurpath = path+"/"+filename+"_fur_"+str(nn)+".mb"
nn =nn+1
cmds.file(outputfurpath,force = 1,options ='v=0;' ,typ = 'mayaBinary',pr=1,es=1 )
else:
cmds.warning('目标路径不存在！！！')
def createLensShaders(centerCam, leftCam, rightCam):
import maya.mel as mel
import maya.cmds as cmds
print "Center: " + centerCam + "Left: " + leftCam + "Right: " + rightCam
# ---------------------------------------------------------------------
#Set up the base folder path for the Domemaster3D control maps
# ---------------------------------------------------------------------
#Variables
# separationMapFileTexture = getSourceImagesPath("separation_map.png")
# turnMapFileTexture = getSourceImagesPath("turn_map.png")
# tiltMapFileTexture = getSourceImagesPath("head_tilt_map.png")
# Arnold camera type
cameraType = 'DomemasterStereo'
# Check if Arnold is loaded before linking the attributes
if (cmds.pluginInfo("mtoa", q=True, loaded=True)):
# Switch the active camera type
#cmds.setAttr( centerCam+'.ai_translator', cameraType, type='string')
cmds.setAttr(leftCam + '.ai_translator', cameraType, type='string')
cmds.setAttr(rightCam + '.ai_translator', cameraType, type='string')
# ---------------------------------------------------------------------
# Create the fulldome nodes for the rig
# ---------------------------------------------------------------------
#cmds.setAttr( centerCam+'.aiCamera', 0 ) #Set the view to center
cmds.setAttr(leftCam + '.aiCamera', 1) #Set the view to left
cmds.setAttr(rightCam + '.aiCamera', 2) #Set the view to right
# ---------------------------------------------------------------------
# Link the common left and right camera attributes to the center camera
# ---------------------------------------------------------------------
# Link the right camera attributes
cmds.connectAttr(leftCam + '.aiFovAngle',
rightCam + '.aiFovAngle',
force=True)
cmds.connectAttr(leftCam + '.aiZeroParallaxSphere',
rightCam + '.aiZeroParallaxSphere',
force=True)
cmds.connectAttr(leftCam + '.aiSeparation',
rightCam + '.aiSeparation',
force=True)
cmds.connectAttr(leftCam + '.aiForwardTilt',
rightCam + '.aiForwardTilt',
force=True)
cmds.connectAttr(leftCam + '.aiTiltCompensation',
rightCam + '.aiTiltCompensation',
force=True)
cmds.connectAttr(leftCam + '.aiVerticalMode',
rightCam + '.aiVerticalMode',
force=True)
cmds.connectAttr(leftCam + '.aiSeparationMap',
rightCam + '.aiSeparationMap',
force=True)
cmds.connectAttr(leftCam + '.aiHeadTurnMap',
rightCam + '.aiHeadTurnMap',
force=True)
cmds.connectAttr(leftCam + '.aiHeadTiltMap',
rightCam + '.aiHeadTiltMap',
force=True)
cmds.connectAttr(leftCam + '.aiFlipRayX',
rightCam + '.aiFlipRayX',
force=True)
cmds.connectAttr(leftCam + '.aiFlipRayY',
rightCam + '.aiFlipRayY',
force=True)
# ---------------------------------------------------------------------
# Create the custom Domemaster3D shading networks
# ---------------------------------------------------------------------
# Create the nodes
# ---------------------------------------------------------------------
# Link the center camera lens shader to the Maya camera rig stereo3d settings
# This enables real-time 3D previews in the viewport
# ---------------------------------------------------------------------
cmds.connectAttr(leftCam + '.aiZeroParallaxSphere',
centerCam + '.zeroParallax',
force=True)
cmds.connectAttr(leftCam + '.aiSeparation',
centerCam + '.interaxialSeparation',
force=True)
#Turn off the Stereo 3D effect on the native Maya camera rig
# This skips the need for a pre-render and post-render mel script.
cmds.setAttr(centerCam + '.stereo', 0)
def xrivetTrOnNurbs(tr,
surface,
mainDirection=1,
out='worldSpace[0]',
u=None,
v=None,
offsetOrient=[0, 0, 0],
min=False):
'''
:param tr:
:type tr:
:param surface:
:type surface:
:param mainDirection:
:type mainDirection:
:param out:
:type out:
:param u:
:type u:
:param v:
:type v:
:param offsetOrient:
:type offsetOrient:
:return:
:rtype:
'''
attrsFrom = ['outTranslation', 'outRotation', 'outScale', 'outShear']
attrsTo = ['translate', 'rotate', 'scale', 'shear']
require_plugin = ['xRivet']
for plugin in require_plugin:
if not mc.pluginInfo(plugin, q=True, l=True):
try:
mc.loadPlugin(plugin, quiet=True)
except:
print 'warning : {0} plugin could not load'.format(plugin)
return
xRivet = '{0}_xRivetNurbs'.format(surface)
if not mc.objExists(xRivet):
xRivet = mc.createNode('xRivetNurbs', n=xRivet)
mc.connectAttr('{0}.{1}'.format(surface, out),
'{0}.inNurbsSurface'.format(xRivet))
indexLast = getXrivetEntryAvailable(xRivet)
if u != None and v != None:
valU, valV = u, v
else:
valU, valV = getUvOnSurfaceFromeTr(tr, surface, out)
# if min:
# valV/=2
#print valV,'***********---------------'
# xrivetTrans = mc.createNode('transform', n = tr + 'Xrivet')
mc.setAttr('{0}.xRivetDatas[{1}].uValue'.format(xRivet, indexLast), valU)
mc.setAttr('{0}.xRivetDatas[{1}].vValue'.format(xRivet, indexLast), valV)
mc.setAttr('{0}.xRivetDatas[{1}].mainDirection'.format(xRivet, indexLast),
mainDirection)
mc.setAttr('{0}.xRivetDatas[{1}].stretchSquash'.format(xRivet, indexLast),
0)
# for attrFrom, attrTo in zip(attrsFrom, attrsTo):
# mc.connectAttr('{0}.outputTransforms[{1}].{2}'.format(xRivet, indexLast, attrFrom),
# '{0}.{1}'.format(xrivetTrans, attrTo))
# mc.parentConstraint(xrivetTrans, tr, mo = True)
mc.connectAttr(
'{0}.outputTransforms[{1}].{2}'.format(xRivet, indexLast,
'outTranslation'),
'{0}.{1}'.format(tr, 'translate'))
addRot = mc.createNode('animBlendNodeAdditiveRotation',
n=tr + 'AdditiveRotation')
mc.setAttr(addRot + '.accumulationMode', 1)
mc.connectAttr(
'{0}.outputTransforms[{1}].{2}'.format(xRivet, indexLast,
'outRotation'),
'{0}.{1}'.format(addRot, 'inputA'))
mc.setAttr(addRot + '.inputB', *offsetOrient)
mc.connectAttr(addRot + '.output', tr + '.rotate')
# mc.pointConstraint(xrivetTrans, tr, mo = True)
# mc.orientConstraint(xrivetTrans, tr, mo = True)
return xRivet, indexLast
def vrayLoad(*args):
if not cmds.pluginInfo('vrayformaya', q=1, loaded=1):
cmds.loadPlugin('vrayformaya')
cmds.loadPlugin('xgenVRay')
cmds.setAttr('defaultRenderGlobals.currentRenderer', 'vray', type='string')
def pre_import():
if not cmds.pluginInfo('kikoUndoer', q=1, l=1):
cmds.loadPlugin('kikoUndoer', quiet=True)
MayaUndoHelper.anim_curve_change = OpenMayaAnim.MAnimCurveChange()
MayaUndoHelper.dg_modifier = OpenMaya.MDGModifier()
def load(self, context, name=None, namespace=None, options=None):
# (NOTE) AnimWire modifier has a bug that not able to find wires if
# namespace is applied.
# The hairSystem is okay to work with, but not able to update
# XGen preview. So you either simulate without the update, or
# build the simulation without namespace and save with .xgen
# file exported, then reference it with namespace.
#
# https://forums.autodesk.com/t5/maya-dynamics/anim-wire-
# errors-when-using-namespaces/m-p/7329883#M5642
#
if not cmds.pluginInfo("xgenToolkit", query=True, loaded=True):
cmds.loadPlugin("xgenToolkit", quiet=True)
representation = context["representation"]
asset = context["asset"]
asset_name = asset["data"].get("shortName", asset["name"])
family_name = context["version"]["data"]["families"][0].split(".")[-1]
namespace = namespace or unique_root_namespace(asset_name, family_name)
descriptions_data = representation["data"]["descriptionsData"]
baked = representation["data"]["step"] != xgen.SHAPING
bound_meshes = list()
# Varify selection
selected = cmds.ls(sl=True, long=True)
all_bound_geos = set()
for data in descriptions_data.values():
for geo in data["bound"]:
all_bound_geos.add("|" + geo)
msg = ("Require bound geos: {0}\n"
"Selected: {1}".format(all_bound_geos, selected))
assert set(selected) == all_bound_geos, msg
# Rename bound geos to namespace
for node in selected:
bound_meshes.append(node)
# Copy maps
local_map_dir = os.path.join(avalon.api.Session["AVALON_WORKDIR"],
"xgen",
"published",
# Add username to ease out file lock issue
getpass.getuser())
map_dir = os.path.join(self.package_path, "maps")
for palette in os.listdir(map_dir):
palette_dir = os.path.join(map_dir, palette)
local_palette_dir = os.path.join(local_map_dir, palette)
# Copy
copy_tree(palette_dir, local_palette_dir)
# Import palette
palette_nodes = list()
xgen.preview_clear()
for file in representation["data"]["palettes"]:
xgen_path = os.path.join(self.package_path, file)
xgen_path = xgen_path.replace("\\", "/")
palette_node = xgen.import_palette(xgen_path,
wrapPatches=True)
palette_nodes.append(palette_node)
# Set xgDataPath
palette = os.path.splitext(file)[0]
data_path = os.path.join(local_map_dir, palette).replace("\\", "/")
xgen.set_data_path(palette_node, data_path)
if not baked:
# Bind grooming descriptions to geometry
for desc in xgen.list_descriptions(palette_node):
groom = xgen.get_groom(desc)
if groom:
groom_dir = os.path.join(self.package_path,
"groom",
palette_node,
desc)
xgen.import_grooming(desc, groom, groom_dir)
# Apply ID
asset_id = str(asset["_id"])
with utils.id_namespace(asset_id):
for desc in xgen.list_descriptions(palette_node):
_desc = desc.rsplit(":", 1)[-1]
id = descriptions_data[_desc]["id"]
utils.upsert_id(desc, id)
# Ensure tube shade disabled
xgen.disable_tube_shade(palette_node)
group_name = self.group_name(namespace, name)
# Cannot be grouped
# cmds.group(palette_nodes, name=group_name, world=True)
# palette_nodes = cmds.ls(palette_nodes, long=True)
# Containerising..
nodes = palette_nodes[:]
nodes += bound_meshes
nodes += cmds.listRelatives(palette_nodes,
allDescendents=True,
fullPath=True)
nodes += apply_namespace_wrapper(namespace, nodes)
container_id = options.get("containerId",
utils.generate_container_id())
container = subset_containerising(name=name,
namespace=namespace,
container_id=container_id,
nodes=nodes,
context=context,
cls_name=self.__class__.__name__,
group_name=group_name)
return container
def load_hyperdrive_plugin():
plugin_name = "hyperdrive"
if not cmds.pluginInfo(plugin_name, q=True, l=True):
cmds.loadPlugin(plugin_name)
cmds.evaluator(enable=True, name='hdEvaluator')
def invert(base=None, corrective=None, name=None):
"""@brief Inverts a shape through the deformation chain.
@param[in] base Deformed base mesh.
@param[in] corrective Sculpted corrective mesh.
@param[in] name Name of the generated inverted shape.
@return The name of the inverted shape.
"""
if not cmds.pluginInfo('cvShapeInverter.py', query=True, loaded=True):
cmds.loadPlugin('cvShapeInverter.py')
cmds.undoInfo(openChunk=True)
if not base or not corrective:
sel = cmds.ls(sl=True)
if not sel or len(sel) != 2:
cmds.undoInfo(closeChunk=True)
raise RuntimeError, 'Select base then corrective'
base, corrective = sel
# Get points on base mesh
basePoints = getPoints(base)
numPoints = basePoints.length()
# Get points on corrective mesh
correctivePoints = getPoints(corrective)
# Get the intermediate mesh
shapes = cmds.listRelatives(base, children=True, shapes=True)
for s in shapes:
if cmds.getAttr('%s.intermediateObject' % s) and cmds.listConnections(
'%s.worldMesh' % s, source=False):
origMesh = s
break
else:
cmds.undoInfo(closeChunk=True)
raise RuntimeError('No intermediate shape found for %s.' % base)
# Get the component offset axes
origPoints = getPoints(origMesh)
xPoints = OpenMaya.MPointArray(origPoints)
yPoints = OpenMaya.MPointArray(origPoints)
zPoints = OpenMaya.MPointArray(origPoints)
for i in range(numPoints):
xPoints[i].x += 1.0
yPoints[i].y += 1.0
zPoints[i].z += 1.0
setPoints(origMesh, xPoints)
xPoints = getPoints(base)
setPoints(origMesh, yPoints)
yPoints = getPoints(base)
setPoints(origMesh, zPoints)
zPoints = getPoints(base)
setPoints(origMesh, origPoints)
# Create the mesh to get the inversion deformer
if not name:
name = '%s_inverted' % corrective
invertedShape = cmds.duplicate(base, name=name)[0]
# Delete the unnessary shapes
shapes = cmds.listRelatives(invertedShape, children=True, shapes=True)
for s in shapes:
if cmds.getAttr('%s.intermediateObject' % s):
cmds.delete(s)
setPoints(invertedShape, origPoints)
# Unlock the transformation attrs
for attr in 'trs':
for x in 'xyz':
cmds.setAttr('%s.%s%s' % (invertedShape, attr, x), lock=False)
cmds.setAttr('%s.visibility' % invertedShape, 1)
deformer = cmds.deformer(invertedShape, type='cvShapeInverter')[0]
# Calculate the inversion matrices
oDeformer = getMObject(deformer)
fnDeformer = OpenMaya.MFnDependencyNode(oDeformer)
plugMatrix = fnDeformer.findPlug('inversionMatrix', False)
fnMatrixData = OpenMaya.MFnMatrixData()
for i in range(numPoints):
matrix = OpenMaya.MMatrix()
setMatrixRow(matrix, xPoints[i] - basePoints[i], 0)
setMatrixRow(matrix, yPoints[i] - basePoints[i], 1)
setMatrixRow(matrix, zPoints[i] - basePoints[i], 2)
matrix = matrix.inverse()
oMatrix = fnMatrixData.create(matrix)
plugMatrixElement = plugMatrix.elementByLogicalIndex(i)
plugMatrixElement.setMObject(oMatrix)
# Store the base points.
fnPointData = OpenMaya.MFnPointArrayData()
oPointData = fnPointData.create(basePoints)
plugDeformedPoints = fnDeformer.findPlug('deformedPoints', False)
plugDeformedPoints.setMObject(oPointData)
cmds.connectAttr('%s.outMesh' % getShape(corrective),
'%s.correctiveMesh' % deformer)
cmds.setAttr('%s.activate' % deformer, True)
cmds.undoInfo(closeChunk=True)
return invertedShape
def createLensShaders(centerCam, leftCam, rightCam):
import maya.mel as mel
import maya.cmds as cmds
print "[Center] " + centerCam + " [Left] " + leftCam + " [Right] " + rightCam
# ---------------------------------------------------------------------
#Set up the base folder path for the Domemaster3D control maps
# ---------------------------------------------------------------------
#Variables
# separationMapFileTexture = getSourceImagesPath("latlong_separation_map.png")
# turnMapFileTexture = getSourceImagesPath("latlong_turn_map.png")
# tiltMapFileTexture = getSourceImagesPath("latlong_head_tilt_map.png")
# Check if Vray is loaded before linking the attributes
if (cmds.pluginInfo("vrayformaya", query=True, loaded=True)):
# -------------------------------------------------------------------------
# Center Camera Lens Shader
# -------------------------------------------------------------------------
print("[Center Camera] " + centerCam + "\n")
#cmds.select( centerCam, replace=True )
# Enable the Lens Shader's Vray Extra Attributes
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoOn',
longName='vrayLatLongStereoOn',
attributeType='long',
defaultValue=1)
# Center Camera View
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoCamera',
longName='vrayLatLongStereoCamera',
attributeType='long',
defaultValue=0)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoFovVertAngle',
longName='vrayLatLongStereoFovVertAngle',
attributeType='float',
min=0.1,
softMaxValue=180,
defaultValue=180)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoFovHorizAngle',
longName='vrayLatLongStereoFovHorizAngle',
attributeType='float',
min=0.1,
softMaxValue=360,
defaultValue=360)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoParallaxDistance',
longName='vrayLatLongStereoParallaxDistance',
attributeType='float',
min=0.001,
softMaxValue=5000,
defaultValue=720)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoSeparation',
longName='vrayLatLongStereoSeparation',
attributeType='float',
min=0,
softMaxValue=650,
defaultValue=6.5)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoZenithMode',
longName='vrayLatLongStereoZenithMode',
attributeType='long',
defaultValue=0)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoSeparationMap',
longName='vrayLatLongStereoSeparationMap',
attributeType='float3',
usedAsColor=True,
numberOfChildren=3)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoSeparationMap',
longName='vrayLatLongStereoSeparationMap',
usedAsColor=True,
attributeType='float3')
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoSeparationMapr',
longName='vrayLatLongStereoSeparationMapr',
attributeType='float',
parent='vrayLatLongStereoSeparationMap',
defaultValue=1.0)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoSeparationMapg',
longName='vrayLatLongStereoSeparationMapg',
attributeType='float',
parent='vrayLatLongStereoSeparationMap',
defaultValue=1.0)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoSeparationMapb',
longName='vrayLatLongStereoSeparationMapb',
attributeType='float',
parent='vrayLatLongStereoSeparationMap',
defaultValue=1.0)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoFlipX',
longName='vrayLatLongStereoFlipX',
attributeType='long',
defaultValue=0)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoFlipY',
longName='vrayLatLongStereoFlipY',
attributeType='long',
defaultValue=0)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoNeckOffset',
longName='vrayLatLongStereoNeckOffset',
attributeType='float',
min=-10000.0,
softMaxValue=1000.0,
defaultValue=0.0)
cmds.addAttr(centerCam,
shortName='vrayLatLongStereoZenithFov',
longName='vrayLatLongStereoZenithFov',
attributeType='long',
defaultValue=0)
# -------------------------------------------------------------------------
# Left Camera Lens Shader
# -------------------------------------------------------------------------
leftCamShape = leftCam + 'Shape'
# leftCamShape = leftCam
# leftCamShape = getObjectShapeNode(leftCam)
print("[Left Camera Shape] " + leftCamShape + "\n")
#cmds.select( leftCamShape, replace=True )
# Enable the Lens Shader's Vray Extra Attributes
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoOn',
longName='vrayLatLongStereoOn',
attributeType='long',
defaultValue=1)
# Left Camera View
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoCamera',
longName='vrayLatLongStereoCamera',
attributeType='long',
defaultValue=1)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoFovVertAngle',
longName='vrayLatLongStereoFovVertAngle',
attributeType='float',
min=0.1,
softMaxValue=180,
defaultValue=180)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoFovHorizAngle',
longName='vrayLatLongStereoFovHorizAngle',
attributeType='float',
min=0.1,
softMaxValue=360,
defaultValue=360)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoParallaxDistance',
longName='vrayLatLongStereoParallaxDistance',
attributeType='float',
min=0.001,
softMaxValue=5000,
defaultValue=720)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoSeparation',
longName='vrayLatLongStereoSeparation',
attributeType='float',
min=0,
softMaxValue=650,
defaultValue=6.5)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoZenithMode',
longName='vrayLatLongStereoZenithMode',
attributeType='long',
defaultValue=0)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoSeparationMap',
longName='vrayLatLongStereoSeparationMap',
attributeType='float3',
usedAsColor=True,
numberOfChildren=3)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoSeparationMap',
longName='vrayLatLongStereoSeparationMap',
usedAsColor=True,
attributeType='float3')
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoSeparationMapr',
longName='vrayLatLongStereoSeparationMapr',
attributeType='float',
parent='vrayLatLongStereoSeparationMap',
defaultValue=1.0)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoSeparationMapg',
longName='vrayLatLongStereoSeparationMapg',
attributeType='float',
parent='vrayLatLongStereoSeparationMap',
defaultValue=1.0)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoSeparationMapb',
longName='vrayLatLongStereoSeparationMapb',
attributeType='float',
parent='vrayLatLongStereoSeparationMap',
defaultValue=1.0)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoFlipX',
longName='vrayLatLongStereoFlipX',
attributeType='long',
defaultValue=0)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoFlipY',
longName='vrayLatLongStereoFlipY',
attributeType='long',
defaultValue=0)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoNeckOffset',
longName='vrayLatLongStereoNeckOffset',
attributeType='float',
min=-10000.0,
softMaxValue=1000.0,
defaultValue=0.0)
cmds.addAttr(leftCamShape,
shortName='vrayLatLongStereoZenithFov',
longName='vrayLatLongStereoZenithFov',
attributeType='long',
defaultValue=0)
# -------------------------------------------------------------------------
# Right Camera Lens Shader
# -------------------------------------------------------------------------
rightCamShape = rightCam + 'Shape'
# rightCamShape = rightCam
# rightCamShape = getObjectShapeNode(rightCam)
print("[Right Camera Shape] " + rightCamShape + "\n")
#cmds.select( rightCamShape, replace=True )
# Enable the Lens Shader's Vray Extra Attributes
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoOn',
longName='vrayLatLongStereoOn',
attributeType='long',
defaultValue=1)
# Center Camera View
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoCamera',
longName='vrayLatLongStereoCamera',
attributeType='long',
defaultValue=2)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoFovVertAngle',
longName='vrayLatLongStereoFovVertAngle',
attributeType='float',
min=0.1,
softMaxValue=180,
defaultValue=180)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoFovHorizAngle',
longName='vrayLatLongStereoFovHorizAngle',
attributeType='float',
min=0.1,
softMaxValue=360,
defaultValue=360)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoParallaxDistance',
longName='vrayLatLongStereoParallaxDistance',
attributeType='float',
min=0.001,
softMaxValue=5000,
defaultValue=720)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoSeparation',
longName='vrayLatLongStereoSeparation',
attributeType='float',
min=0,
softMaxValue=650,
defaultValue=6.5)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoZenithMode',
longName='vrayLatLongStereoZenithMode',
attributeType='long',
defaultValue=0)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoSeparationMap',
longName='vrayLatLongStereoSeparationMap',
attributeType='float3',
usedAsColor=True,
numberOfChildren=3)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoSeparationMap',
longName='vrayLatLongStereoSeparationMap',
usedAsColor=True,
attributeType='float3')
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoSeparationMapr',
longName='vrayLatLongStereoSeparationMapr',
attributeType='float',
parent='vrayLatLongStereoSeparationMap',
defaultValue=1.0)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoSeparationMapg',
longName='vrayLatLongStereoSeparationMapg',
attributeType='float',
parent='vrayLatLongStereoSeparationMap',
defaultValue=1.0)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoSeparationMapb',
longName='vrayLatLongStereoSeparationMapb',
attributeType='float',
parent='vrayLatLongStereoSeparationMap',
defaultValue=1.0)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoFlipX',
longName='vrayLatLongStereoFlipX',
attributeType='long',
defaultValue=0)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoFlipY',
longName='vrayLatLongStereoFlipY',
attributeType='long',
defaultValue=0)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoNeckOffset',
longName='vrayLatLongStereoNeckOffset',
attributeType='float',
min=-10000.0,
softMaxValue=1000.0,
defaultValue=0.0)
cmds.addAttr(rightCamShape,
shortName='vrayLatLongStereoZenithFov',
longName='vrayLatLongStereoZenithFov',
attributeType='long',
defaultValue=0)
# ---------------------------------------------------------------------
# Link the common left and right camera attributes to the center camera
# ---------------------------------------------------------------------
# Link the left camera attributes
cmds.connectAttr(centerCam + '.vrayLatLongStereoOn',
leftCam + '.vrayLatLongStereoOn',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoFovVertAngle',
leftCam + '.vrayLatLongStereoFovVertAngle',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoFovHorizAngle',
leftCam + '.vrayLatLongStereoFovHorizAngle',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoParallaxDistance',
leftCam + '.vrayLatLongStereoParallaxDistance',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoSeparation',
leftCam + '.vrayLatLongStereoSeparation',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoZenithMode',
leftCam + '.vrayLatLongStereoZenithMode',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoFlipX',
leftCam + '.vrayLatLongStereoFlipX',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoFlipY',
leftCam + '.vrayLatLongStereoFlipY',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoNeckOffset',
leftCam + '.vrayLatLongStereoNeckOffset',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoZenithFov',
leftCam + '.vrayLatLongStereoZenithFov',
force=True)
# Link the right camera attributes
cmds.connectAttr(centerCam + '.vrayLatLongStereoOn',
rightCam + '.vrayLatLongStereoOn',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoFovVertAngle',
rightCam + '.vrayLatLongStereoFovVertAngle',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoFovHorizAngle',
rightCam + '.vrayLatLongStereoFovHorizAngle',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoParallaxDistance',
rightCam + '.vrayLatLongStereoParallaxDistance',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoSeparation',
rightCam + '.vrayLatLongStereoSeparation',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoZenithMode',
rightCam + '.vrayLatLongStereoZenithMode',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoFlipX',
rightCam + '.vrayLatLongStereoFlipX',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoFlipY',
rightCam + '.vrayLatLongStereoFlipY',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoNeckOffset',
rightCam + '.vrayLatLongStereoNeckOffset',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoZenithFov',
rightCam + '.vrayLatLongStereoZenithFov',
force=True)
# ---------------------------------------------------------------------
# Create the custom Domemaster3D shading networks
# ---------------------------------------------------------------------
# Create the nodes
# ---------------------------------------------------------------------
# Link the center camera lens shader to the Maya camera rig stereo3d settings
# This enables real-time 3D previews in the viewport
# ---------------------------------------------------------------------
cmds.connectAttr(centerCam + '.vrayLatLongStereoParallaxDistance',
centerCam + '.zeroParallax',
force=True)
cmds.connectAttr(centerCam + '.vrayLatLongStereoSeparation',
centerCam + '.interaxialSeparation',
force=True)
#Turn off the Stereo 3D effect on the native Maya camera rig
# This skips the need for a pre-render and post-render mel script.
cmds.setAttr(centerCam + '.stereo', 0)
def isPluginLoaded(plugin):
loaded = cmds.pluginInfo(plugin, q = True, loaded = True)
return loaded
rotateAxis(optional = [1,0,0]) - The axis that will be read by the angleReader.
frontAxis(optional = [0,1,0]) - The front axis that will be used by the angleReader.
Output:
Tuple (angleReaderTransform, angleReaderShape)
Authors:
Marin Petrov
www.scroll-lock.eu
'''
# imports
import maya.cmds as mc
# load plugin
if not mc.pluginInfo('angleReader', q=True, loaded=True):
mc.loadPlugin('angleReader')
def installAngleReader(name, rotateAxis=[1, 0, 0], frontAxis=[0, 1, 0]):
sel = mc.ls(sl=True)
if len(sel) != 2:
raise RuntimeError, 'Please select 2 transforms as base and driver in order to install angleReader'
base, driver = sel
if not name:
raise RuntimeError, 'No name specified'
else:
baseName = '%s%sBaseGrp' % (base, name)
driverName = '%s%sDriverGrp' % (driver, name)
readerName = '%s%sReader' % (driver, name)
def loadPlugin(plugin):
loaded = cmds.pluginInfo(plugin, q = True, loaded = True)
if not loaded:
cmds.loadPlugin(plugin)
def initializePlugin(mobject):
global rendererModules
global generalNodeModules
global materialNodeModules
mplugin = OpenMayaMPx.MFnPlugin(mobject)
# Load needed plugins
try:
if not cmds.pluginInfo("objExport", query=True, loaded=True):
cmds.loadPlugin("objExport")
except:
sys.stderr.write("Failed to load objExport plugin\n")
raise
# Register general nodes
try:
for generalNodeModule in generalNodeModules:
mplugin.registerNode(generalNodeModule.kPluginNodeName,
generalNodeModule.kPluginNodeId,
generalNodeModule.nodeCreator,
generalNodeModule.nodeInitializer,
OpenMayaMPx.MPxNode.kDependNode)
print("%s - Registered node : %s" %
(kPluginName, generalNodeModule.kPluginNodeName))
except:
sys.stderr.write("%s - Failed to register node: %s\n" %
(kPluginName, generalNodeModule.kPluginNodeName))
raise
# Register Materials / Volumes / Lights
try:
for materialNodeModule in materialNodeModules:
mplugin.registerNode(materialNodeModule.kPluginNodeName,
materialNodeModule.kPluginNodeId,
materialNodeModule.nodeCreator,
materialNodeModule.nodeInitializer,
OpenMayaMPx.MPxNode.kDependNode,
materialNodeModule.kPluginNodeClassify)
CyclesRenderer.registMaterialNodeType(
materialNodeModule.kPluginNodeName)
print("%s - Registered material : %s" %
(kPluginName, materialNodeModule.kPluginNodeName))
except:
sys.stderr.write("%s - Failed to register node: %s\n" %
(kPluginName, materialNodeModule.kPluginNodeName))
raise
# Register Renderer commands
for rendererModule in rendererModules:
try:
mplugin.registerCommand(rendererModule.kPluginCmdName,
rendererModule.cmdCreator)
print("%s - Registered command : %s" %
(kPluginName, rendererModule.kPluginCmdName))
except:
sys.stderr.write("%s - Failed to register command: %s\n" %
(kPluginName, rendererModule.kPluginCmdName))
raise
# Register Renderers
for rendererModule in rendererModules:
try:
rendererModule.registerRenderer()
print("%s - Registered renderer : %s" %
(kPluginName, rendererModule.kPluginCmdName))
except:
sys.stderr.write("%s - Failed to register renderer: %s\n" %
(kPluginName, rendererModule.kPluginCmdName))
raise
def build_hipAM(hip,
pelvis,
twistJoints,
hipAim='x',
hipFront='y',
pelvisAim='x',
pelvisFront='y',
prefix=''):
'''
Build hip twist using custom hipConstraint node
@param hip: Hip or upper leg joint
@type hip: str
@param pelvis: Pelvis joint
@type pelvis: str
@param twistJoints: List of twist joints
@type twistJoints: list
@param hipAim: Axis along the length of the hip/leg joint
@type hipAim: list or tuple
@param hipFront: Forward facing axis of the hip/leg joint
@type hipFront: list or tuple
@param pelvisAim: Axis along the length of the pelvis joint
@type pelvisAim: list or tuple
@param pelvisFront: Forward facing axis of the pelvis joint
@type pelvisFront: list or tuple
@param prefix: Naming prefix for created nodes
@type prefix: str
'''
# ==========
# - Checks -
# ==========
if not mc.objExists(hip):
raise Exception('Hip joint "' + hip + '" does not exist!')
if not mc.objExists(pelvis):
raise Exception('Pelvis joint "' + pelvis + '" does not exist!')
for twistJoint in twistJoints:
if not mc.objExists(twistJoint):
raise Exception('Twist joint "' + twistJoint + '" does not exist!')
if not prefix: prefix = glTools.utils.stringUtils.stripSuffix(hip)
# Check Plugin
if not mc.pluginInfo('AM_HipConstraint', q=True, l=True):
try:
mc.loadPlugin('AM_HipConstraint')
except:
raise Exception('Unable to load plugin "AM_HipConstraint"!')
# ======================
# - Configure Modifier -
# ======================
# Define Axis Dictionary
axisDict = {
'x': (1, 0, 0),
'y': (0, 1, 0),
'z': (0, 0, 1),
'-x': (-1, 0, 0),
'-y': (0, -1, 0),
'-z': (0, 0, -1)
}
twistCtrlScale = 0.2
# =======================
# - Create Twist Joints -
# =======================
# Reverse twist joint list
twistJoints.reverse()
# Create Twist Driver Joint
mc.select(cl=True)
hipTwist = mc.joint(n=prefix + 'Twist_jnt')
hipTwistGrp = glTools.utils.joint.group(hipTwist)
mc.delete(mc.parentConstraint(hip, hipTwistGrp))
mc.parent(hipTwistGrp, hip)
# Create Hip Twist Joints
twistJointGrp = []
twistFactor = 1.0 / (len(twistJoints) - 1)
jntLen = glTools.utils.joint.length(hip)
for i in range(len(twistJoints)):
controlShape = glTools.tools.controlBuilder.controlShape(
twistJoints[i], 'box', scale=twistCtrlScale * jntLen)
glTools.rig.utils.tagCtrl(twistJoints[i], 'tertiary')
mc.addAttr(twistJoints[i],
ln='twist',
min=-1.0,
max=1.0,
dv=twistFactor * i)
twistJointGrp.append(glTools.utils.joint.group(twistJoints[i]))
# ==========================
# - Create Hip Twist Setup -
# ==========================
# Create hipConstraint node
hipCon = mc.createNode('am_hipConstraint')
# Set and connect hipConstraint attributes
mc.connectAttr(hip + '.worldMatrix[0]', hipCon + '.hip', f=True)
mc.connectAttr(pelvis + '.worldMatrix[0]', hipCon + '.pelvis', f=True)
mc.connectAttr(hipTwist + '.parentInverseMatrix[0]',
hipCon + '.parentInverseMatrix',
f=True)
mc.connectAttr(hipTwist + '.rotateOrder', hipCon + '.rotateOrder', f=True)
mc.connectAttr(hipTwist + '.jointOrient', hipCon + '.jointOrient', f=True)
mc.setAttr(hipCon + '.hipAim', *axisDict[hipAim])
mc.setAttr(hipCon + '.hipFront', *axisDict[hipFront])
mc.setAttr(hipCon + '.pelvisAim', *axisDict[pelvisAim])
mc.setAttr(hipCon + '.pelvisFront', *axisDict[pelvisFront])
# Connect to hip twist joint
mc.connectAttr(hipCon + '.rotate', hipTwist + '.rotate', f=True)
# Correct initial offset
twistOffset = mc.getAttr(hipTwist + '.r' + hipAim[-1])
mc.setAttr(hipTwist + '.jo' + hipAim[-1], twistOffset)
# ========================
# - Connect Twist Joints -
# ========================
twistMultNode = []
for i in range(len(twistJoints)):
alphaInd = glTools.utils.stringUtils.alphaIndex(i, upper=True)
twistMult = mc.createNode('multDoubleLinear',
n=prefix + '_twist' + alphaInd +
'_multDoubleLinear')
mc.connectAttr(hipTwist + '.r' + hipAim[-1],
twistMult + '.input1',
f=True)
mc.connectAttr(twistJoints[i] + '.twist',
twistMult + '.input2',
f=True)
mc.connectAttr(twistMult + '.output',
twistJointGrp[i] + '.r' + hipAim[-1],
f=True)
twistMultNode.append(twistMult)
# Reverse twist joint list
twistJoints.reverse()
# ======================
# - Set Channel States -
# ======================
chStateUtil = glTools.utils.channelState.ChannelState()
chStateUtil.setFlags([0, 0, 0, 0, 0, 0, 0, 0, 0, 1],
objectList=twistJoints)
chStateUtil.setFlags([2, 2, 2, 2, 2, 2, 2, 2, 2, 1],
objectList=twistJointGrp)
chStateUtil.setFlags([2, 2, 2, 2, 2, 2, 2, 2, 2, 1],
objectList=[hipTwistGrp])
chStateUtil.setFlags([2, 2, 2, 1, 1, 1, 2, 2, 2, 1], objectList=[hipTwist])
# =================
# - Return Result -
# =================
# Define control list
ctrlList = twistJoints
return
def load_plugin(plugin_name):
if not mc.pluginInfo(plugin_name, q=1, loaded=1):
mc.loadPlugin(plugin_name, quiet=1)
def check_gpu_plugin():
""" Check for the gpuCache plugin load
"""
if not cmds.pluginInfo('gpuCache', query=True, loaded=True):
cmds.loadPlugin('gpuCache')
