def mea_dataFromSensor(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
try:
device_id = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
api_key = data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
if not "value" in params:
verbose(2, "ERROR (", fn_name, ") - no value parameter")
return False
value = params["value"]
mem_device = mea.getMemory(device_id)
mem_interface = mea.getMemory("interface" + str(interface_id))
pdata = mea_utils.parseKeyValueDatasToDictionary(
str(data['data']).strip().lower(), ";", "=")
if value in pdata:
v = pdata[value]
f = 0.0
if type(v) == str:
try:
f = float(v)
except:
return False
mem_device["current"] = f
mea.addDataToSensorsValuesTable(device_id, f, 0, 0, "")
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor",
"basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", str(f))
mea.xplSendMsg(xplMsg)
# mea.interfaceAPI(api_key, "mea_writeData", "{{{OK}}}")
else:
return -1
def mea_dataFromSensor(data):
fn_name= __name__ + "/" + str(sys._getframe().f_code.co_name)
try:
device_id=data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name=data["device_name"]
interface_id=data["interface_id"]
parameters=data["device_parameters"]
parameters=parameters.strip().lower()
params=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype=data["typeoftype"]
api_key=data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
if not "value" in params:
verbose(2, "ERROR (", fn_name, ") - no value parameter")
return False
value = params["value"]
mem_device=mea.getMemory(device_id)
mem_interface=mea.getMemory("interface"+str(interface_id))
pdata = mea_utils.parseKeyValueDatasToDictionary(str(data['data']).strip().lower(),";","=")
if value in pdata:
v = pdata[value]
f = 0.0
if type(v) == str:
try:
f=float(v)
except:
return False
mem_device["current"]=f
mea.addDataToSensorsValuesTable(device_id, f, 0,0,"")
xplMsg=mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", str(f))
mea.xplSendMsg(xplMsg)
# mea.interfaceAPI(api_key, "mea_writeData", "{{{OK}}}")
else:
return -1
def mea_dataFromSensor(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
try:
device_id = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
api_key = data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
if not "value" in params:
verbose(2, "ERROR (", fn_name, ") - no value parameter")
return False
value = params["value"]
mem_device = mea.getMemory(device_id)
mem_interface = mea.getMemory("interface" + str(interface_id))
pdata = mea_utils.parseKeyValueDatasToDictionary(
str(data['data']).strip().lower(), ";", "=")
if value in pdata:
v = pdata[value].lower()
f = 0
if type(v) == str:
try:
f = float(v)
except:
if v in ["on", "off", "high", "low", "true", "false"]:
f = v
else:
return False
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor",
"basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", str(f))
mea.xplSendMsg(xplMsg)
mea.interfaceAPI(api_key, "mea_writeData",
"[[[" + device_name + "!OK]]]\n")
return True
return False
def mea_xplCmndMsg(data):
fn_name= __name__ + "/" + str(sys._getframe().f_code.co_name)
try:
id_actuator=data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name=data["device_name"]
interface_id=data["interface_id"]
typeoftype=data["typeoftype"]
api_key=data["api_key"]
parameters=data["device_parameters"]
parameters=parameters.strip().lower()
params=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
except:
verbose(2, "ERROR (", fn_name, ") - parameters error")
return False
mem_actuator=mea.getMemory(id_actuator)
mem_interface=mea.getMemory("interface"+str(interface_id))
return True
def mea_dataFromSensor(data):
fn_name= __name__ + "/" + str(sys._getframe().f_code.co_name)
# verbose(9, "DEBUG (", fn_name, ") data = ", data)
try:
device_id=data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name=data["device_name"]
interface_id=data["interface_id"]
api_key=data["api_key"]
typeoftype=data["typeoftype"]
parameters=data["device_parameters"]
parameters=parameters.strip().lower()
params=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem_device=mea.getMemory(device_id)
mem_interface=mea.getMemory("interface"+str(interface_id))
else:
def mea_dataFromSensor(data):
fn_name=sys._getframe().f_code.co_name
try:
id_sensor=data["device_id"]
verbose(1, "DEBUG (", fn_name, ") - id_sensor=", id_sensor)
packet=data["data"]
l_packet=data["l_data"]
parameters=data["device_parameters"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem=mea.getMemory(id_sensor)
paramsDict=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
current=""
try:
device=paramsDict["xpldevice"];
except:
device=-1;
if packet[4]==1: # ENOCEAN_RADIO_ERP1
if packet[6]==0xD2:
if (packet[7] & 0b00001111) == 4: # reception packet status
try:
if (paramsDict["channel"]=="A" and (packet[8] & 0b00011111) == 0) or (paramsDict["channel"]=="B" and (packet[8] & 0b00011111) == 1):
if (packet[9] & 0b01111111) == 0:
current='low'
else:
current='high'
except:
return False
if current != "":
try:
mem["last"]=mem["current"]
except:
mem["last"]=False
mem["current"]=current
xplMsg=mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg,"device", data["device_name"].lower())
mea_utils.xplMsgAddValue(xplMsg,"current", mem["current"])
mea_utils.xplMsgAddValue(xplMsg,"type", "input")
mea_utils.xplMsgAddValue(xplMsg,"last", mem["last"])
mea.xplSendMsg(xplMsg)
return True
return False
def mea_dataFromSensor(data):
fn_name=sys._getframe().f_code.co_name
try:
id_sensor=data["device_id"]
verbose(1, "DEBUG (", fn_name, ") - id_sensor=", id_sensor)
packet=data["data"]
l_packet=data["l_data"]
parameters=data["device_parameters"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem=mea.getMemory(id_sensor)
paramsDict=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
current=""
try:
device=paramsDict["xpldevice"];
except:
device=-1;
if packet[4]==1: # ENOCEAN_RADIO_ERP1
if packet[6]==0xD2:
if (packet[7] & 0b00001111) == 4: # reception packet status
try:
if (paramsDict["channel"]=="A" and (packet[8] & 0b00011111) == 0) or (paramsDict["channel"]=="B" and (packet[8] & 0b00011111) == 1):
if (packet[9] & 0b01111111) == 0:
current='low'
else:
current='high'
except:
return False
if current != "":
try:
mem["last"]=mem["current"]
except:
mem["last"]=False
mem["current"]=current
xplMsg=mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg,"device", data["device_name"].lower())
mea_utils.xplMsgAddValue(xplMsg,"current", mem["current"])
mea_utils.xplMsgAddValue(xplMsg,"type", "input")
mea_utils.xplMsgAddValue(xplMsg,"last", mem["last"])
mea.xplSendMsg(xplMsg)
return True
return False
def mea_xplCmndMsg(data):
fn_name= __name__ + "/" + str(sys._getframe().f_code.co_name)
verbose(9, "DEBUG (", fn_name, ") data = ", data)
try:
id_actuator=data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name=data["device_name"]
interface_id=data["interface_id"]
parameters=data["device_parameters"]
parameters=parameters.strip().lower()
params=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype=data["typeoftype"]
api_key=data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - parameters error")
return False
mem_actuator=mea.getMemory(id_actuator)
mem_interface=mea.getMemory("interface"+str(interface_id))
x=data["xplmsg"]
body=x["body"]
target="*"
if "source" in x:
target=x["source"]
if x["schema"]=="control.basic":
try:
cmnd=params["cmnd"];
except:
verbose(2, "ERROR (", fn_name, ") - no cmnd")
return False
_cmnd=[cmnd]
p = subprocess.Popen(_cmnd)
def mea_xplCmndMsg(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
verbose(9, "DEBUG (", fn_name, ") data = ", data)
try:
id_actuator = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
api_key = data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - parameters error")
return False
mem_actuator = mea.getMemory(id_actuator)
mem_interface = mea.getMemory("interface" + str(interface_id))
x = data["xplmsg"]
body = x["body"]
target = "*"
if "source" in x:
target = x["source"]
if x["schema"] == "control.basic":
try:
cmnd = params["cmnd"]
except:
verbose(2, "ERROR (", fn_name, ") - no cmnd")
return False
_cmnd = [cmnd]
p = subprocess.Popen(_cmnd)
def mea_xplCmndMsg(data):
fn_name = sys._getframe().f_code.co_name
try:
id_sensor = data["device_id"]
parameters = data["device_parameters"]
typeoftype = data["typeoftype"]
api_key = data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return 0
mem = mea.getMemory(id_sensor)
paramsDict = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
x = data["xplmsg"]
body = x["body"]
target = "*"
if "source" in x:
target = x["source"]
channel = -1
current = -1
if x["schema"] == "control.basic" and typeoftype == 1:
try:
if body["type"] == "output":
if body["current"] == "high":
current = 100
elif body["current"] == "low":
current = 0
if current <> -1:
channel = ord(paramsDict["channel"][0]) - ord('A')
buf = bytearray()
buf.append(0x01)
buf.append(channel & 0b11111)
buf.append(current & 0b1111111)
mea.interfaceAPI(api_key, "sendEnoceanRadioErp1Packet",
0xD2, 0, data["ENOCEAN_ADDR"], buf)
try:
if paramsDict["force_status"] == "yes":
channel = ord(paramsDict["channel"][0]) - ord('A')
buf = bytearray()
buf.append(0x03)
buf.append(channel & 0b11111)
mea.interfaceAPI(api_key,
"sendEnoceanRadioErp1Packet",
0xD2, 0, data["ENOCEAN_ADDR"],
buf)
except Exception as e:
verbose(2, "ERROR (", fn_name,
") - can't query device: ", str(e))
pass
except Exception as e:
verbose(2, "ERROR (", fn_name,
") - can't create/send enocean packet: ", str(e))
return False
elif x["schema"] == "sensor.request" and typeoftype == 0:
if body["request"] == "current":
try:
buf = bytearray()
channel = ord(paramsDict["channel"][0]) - ord('A')
buf.append(0x03)
buf.append(channel & 0b11111)
mea.interfaceAPI(api_key, "sendEnoceanRadioErp1Packet", 0xD2,
0, data["ENOCEAN_ADDR"], buf)
except Exception as e:
verbose(2, "ERROR (", fn_name, ") - can't query device: ",
str(e))
return False
else:
verbose(2, "ERROR (", fn_name, ") - invalid request (",
body["request"], ")")
return False
return True
return False
def mea_dataFromSensor(data):
fn_name=str(sys._getframe().f_code.co_name) + "/" + __name__
parameters=False
try:
id_sensor=data["device_id"]
device=data["device_name"]
serial_data=data["data"]
l_serial_data=data["l_data"]
toDbFlag=data["todbflag"]
# parameters=data["device_parameters"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem=mea.getMemory(id_sensor)
# récupération des paramétres
if parameters <> False:
params=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
# faire ce qu'il faut ici avec les parametres
# conversion des données si nécessaire
# récupération des données dans une chaine de caractères unicode
s=serial_data.decode('latin-1')
# traitement des données
# récupère (ou pas) un SMS dans les données
sms=mea_getSMS(s)
if sms[0] == False:
if sms[1] == 1:
verbose(2, "ERROR (", fn_name, ") - incomplete SMS data")
else:
verbose(9, "DEBUG (", fn_name, ") - not a SMS")
return False
# analyse des données
alarm=_analyseData(sms[1])
if alarm[0] == False:
verbose(9, "DEBUG (", fn_name, ") - not an EPG message : ", alarm[1])
return False
verbose(9, alarm)
# vérification validité
try:
last_date = datetime.strptime( mem['date']+"-"+ mem['time'], '%d/%m/%Y-%H:%M:%S')
except:
last_date = datetime.fromtimestamp(0);
try:
current_date = datetime.strptime( alarm[2]+"-"+ alarm[3], '%d/%m/%Y-%H:%M:%S')
except:
verbose(9, "ERROR (", fn_name, ") - EPG message date and time error : ", alarm[2]+"-"+alarm[3]+" ?")
return False
if current_date < last_date:
verbose(9, "ERROR (", fn_name, ") - older EPG message than previous received")
return False
now = datetime.now()
d = (now - current_date).total_seconds() / 60;
verbose (9, d)
if d > 15:
verbose(9, "ERROR (", fn_name, ") - too old EPG message")
return False
# memorisation des données
try:
mem['last']=mem['current']
except:
mem['last']=-1
mem['current']=alarm[0]
if alarm[1]==False:
who="";
else:
who=str(alarm[1])
mem['who']=who
mem['date']=str(alarm[2])
mem['time']=str(alarm[3])
mea.addDataToSensorsValuesTable(id_sensor,mem['current'],0,0,who)
# emission XPL
xplMsg=mea_utils.xplMsgNew('me', "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", data["device_name"])
mea_utils.xplMsgAddValue(xplMsg, 'current', mem['current'])
mea.xplSendMsg(xplMsg)
return True
def mea_dataFromSensor(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
# verbose(9, "DEBUG (", fn_name, ") data = ", data)
try:
device_id = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem_device = mea.getMemory(device_id)
mem_interface = mea.getMemory("interface" + str(interface_id))
# validation du parametre
pin = 0
try:
pin = params["pin"]
except:
verbose(2, "ERROR (", fn_name, ") - ", device_name, " parameters error : no PIN defined")
return False
if len(pin) != 2:
verbose(2, "ERROR (", fn_name, ") - ", device_name, " PIN format error")
return False
if pin[0] != "l" and pin[0] != "a":
verbose(2, "ERROR (", fn_name, ") - ", device_name, " PIN type error")
return Flase
else:
pinType = pin[0]
if pin[1] < "0" or pin[1] > "9":
verbose(2, "ERROR (", fn_name, ") - ", device_name, " PIN number error")
return False
else:
pinNum = int(pin[1])
# on va traiter les données prémachées par mea_serialDataPre
if "sendFlag" in mem_interface[pinNum] and mem_interface[pinNum]["sendFlag"] == True:
if "current" in mem_interface[pinNum]:
current_value = mem_interface[pinNum]["current"]
if pinType == "l":
if mem_interface[pinNum]["current"] == 0:
current_value = "low"
else:
current_value = "high"
mea.addDataToSensorsValuesTable(device_id, mem_interface[pinNum]["current"], 0, 0, "")
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", current_value)
mea.xplSendMsg(xplMsg)
return True
return False
def mea_xplCmndMsg(data):
fn_name=sys._getframe().f_code.co_name
try:
id_sensor=data["device_id"]
parameters=data["device_parameters"]
api_key=data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return 0
mem=mea.getMemory(id_sensor)
paramsDict=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
x=data["xplmsg"]
body=x["body"]
target="*"
if "source" in x:
target=x["source"]
channel = -1;
current = -1;
if x["schema"]=="control.basic":
try:
if body["type"] == "output":
if body["current"]=="high":
current = 100;
elif body["current"]=="low":
current = 0;
if paramsDict["channel"]=="A":
channel = 0;
elif paramsDict["channel"]=="B":
channel = 1;
if channel <> -1 and current <> -1:
buf=bytearray();
buf.append(0x01)
buf.append(channel & 0b11111)
buf.append(current & 0b1111111)
mea.interfaceAPI(api_key, "sendEnoceanRadioErp1Packet", 0xD2, 0, data["ENOCEAN_ADDR"], buf)
except Exception as e:
verbose(2, "ERROR (", fn_name, ") - can't create enocean packet ", str(e))
return False
elif x["schema"]=="sensor.request":
try:
xplMsg=mea_utils.xplMsgNew("me", target, "xpl-stat", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg,"device", data["device_name"].lower())
if body["request"]=="current":
mea_utils.xplMsgAddValue(xplMsg,"current",mem["current"])
elif body["request"]=="last":
mea_utils.xplMsgAddValue(xplMsg,"last",mem["last"])
else:
verbose(2, "ERROR (", fn_name, ") - invalid request (", body["request"],")")
return False
mea_utils.xplMsgAddValue(xplMsg,"type","input")
except:
verbose(2, "ERROR (", fn_name, ") - can't create xpl message")
return False
mea.xplSendMsg(xplMsg)
return True
return False
def mea_xplCmndMsg(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
verbose(9, "DEBUG (", fn_name, ") data = ", data)
try:
id_device = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
api_key = data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - parameters error")
return False
mem_device = mea.getMemory(id_device)
mem_interface = mea.getMemory("interface" + str(interface_id))
x = data["xplmsg"]
body = x["body"]
target = "*"
if "source" in x:
target = x["source"]
if x["msgtype"] != 'xpl-cmnd':
return False
if x["schema"] == "sensor.request":
if "request" in body:
if body["request"] == "current":
mea.interfaceAPI(api_key, "mea_writeData",
"[[[" + device_name + "?current]]]\n")
return True
return False
elif x["schema"] == "control.basic":
if typeoftype != 1:
verbose(2, "ERROR (", fn_name,
") - device (" + devicename + ") is not an output")
return False
if not "current" in body:
verbose(2, "ERROR (", fn_name, ") - no current in body")
return False
v = body["current"].lower()
try:
f = float(v)
except:
if v in ["on", "off", "high", "low", "true", "false"]:
f = v
else:
verbose(2, "ERROR (", fn_name,
") - invalid current (" + v + ") value")
return False
mea.interfaceAPI(api_key, "mea_writeData",
"[[[" + device_name + "=" + str(f) + "]]]\n")
return True
return False
def mea_xplCmndMsg(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
try:
id_actuator = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
except:
verbose(2, "ERROR (", fn_name, ") - parameters error")
return False
mem_actuator = mea.getMemory(id_actuator)
mem_interface = mea.getMemory("interface" + str(interface_id))
# validation du parametre
pin = 0
if "pin" in params:
pin = params["pin"]
else:
verbose(9, "DEBUG (", fn_name, ") - parameters error : no pin")
return False
if len(pin) != 2:
verbose(2, "ERROR (", fn_name, ") - PIN parameter error")
return False
if pin[0] != 'l' and pin[0] != 'a':
verbose(2, "ERROR (", fn_name, ") - PIN type error")
return False
else:
pinType = pin[0]
if pin[1] < '0' or pin[1] > '9':
verbose(2, "ERROR (", fn_name, ") - PIN id error")
return False
else:
pinNum = int(pin[1])
# validation du message xpl
try:
x = data["xplmsg"]
schema = x["schema"]
msgtype = x["msgtype"]
body = x["body"]
device = body["device"]
except:
verbose(2, "ERROR (", fn_name, ") - no or incomplet xpl message error")
return False
if msgtype != "xpl-cmnd":
verbose(9, data)
return False
current = False
request = False
if "current" in body:
current = body["current"]
elif "request" in body:
request = body["request"]
else:
verbose(2, "ERROR (", fn_name,
") - no \"current\" or \"request\" in message body")
return False
# préparation de la commande
_cmnd = str(pinNum) + ","
if schema == "control.basic" and typeoftype == 1:
if current == False:
verbose(2, "ERROR (", fn_name,
") - no \"current\" in message body")
return False
try:
type = body["type"]
except:
verbose(2, "ERROR (", fn_name, ") - no \"type\" in message body")
return False
if (pinNum == 0 or pinNum == 3):
verbose(2, "ERROR (", fn_name, ") - PIN 0 and 3 are input only")
return False
if type == "output" and pinType == 'l':
if current == "pulse":
if "data1" in body:
data1 = body["data1"]
if not data1.isdigit():
verbose(2, "ERROR (", fn_name,
") - data1 not numeric value")
return False
data1 = int(data1)
else:
data1 = 200
_cmnd = _cmnd + "P," + str(data1)
elif current == "high" or (current.isdigit()
and int(current) == 1):
_cmnd = _cmnd + "L,H"
elif current == "low" or (current.isdigit() and int(current) == 0):
_cmnd = _cmnd + "L,L"
elif type == "variable" and pinType == 'a':
if pinNum != 1 and pinNum != 2:
verbose(
2, "ERROR (", fn_name,
") - Analog output(PWM) only available on pin 1 and 2")
return False
else:
value = 0
if 'current' in mem_interface[pinNum]:
value = mem_interface[pinNum]['current']
if current == "dec":
value = value - 1
elif current == "inc":
value = value + 1
elif current[0] == '-' or current[0] == '+':
if current[1:].isdigit():
value = int(current)
else:
verbose(2, "ERROR (", fn_name,
") - analog value error (", current, ")")
return False
elif current.isdigit():
value = int(current)
else:
verbose(2, "ERROR (", fn_name, ") - analog value error (",
current, ")")
return False
if value < 0:
value = 0
if value > 255:
value = 255
_cmnd = _cmnd + "A," + str(value)
else:
verbose(2, "ERROR (", fn_name, ") - xpl command error")
return False
elif schema == "sensor.basic":
if request == False:
verbose(2, "ERROR (", fn_name,
") - no \"request\" in message body")
return False
if request != "current":
verbose(2, "ERROR (", fn_name, ") - xpl error request!=current")
return False
if typeoftype == 0:
if pinType == 'a' and pinNum < 4:
verbose(2, "ERROR (", fn_name,
") - Analog input only available on pin 4 to pin 9")
return False
_cmnd = _cmnd + pinType.upper() + ",G"
else:
_cmnd = False
# interrogation de l'état d'une sortie, on récupére de l'info aux niveaux de l'interface si dispo
if not "current" in mem_interface[pinNum]:
return False
current_value = mem_interface[pinNum]["current"]
if pinType == 'l':
if current_value == 0:
current_value = "low"
else:
current_value = "high"
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor",
"basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", current_value)
mea.xplSendMsg(xplMsg)
return True
else:
verbose(9, data)
verbose(2, "ERROR (", fn_name,
") - xpl schema incompatible with sensor/actuator (", schema,
")")
return False
if _cmnd != False:
cmnd = "~~~~CMD:##" + _cmnd + "##\r\nEND\r\n"
# verbose(9, cmnd)
mea.sendSerialData(data['fd'], bytearray(cmnd))
return True
def mea_xplCmndMsg(data):
fn_name=sys._getframe().f_code.co_name
try:
id_sensor=data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return 0
mem=mea.getMemory(id_sensor)
paramsDict=mea_utils.parseKeyValueDatasToDictionary(data["device_parameters"], ",", ":")
if "pin" in paramsDict:
pin=paramsDict["pin"].lower()
else:
return False
if "sensor_type" in paramsDict:
type=paramsDict["sensor_type"]
else:
type="generic"
x=data["xplmsg"]
body=x["body"]
target="*"
if "source" in x:
target=x["source"]
if x["schema"]=="sensor.request":
current_key=pin+"_current"
last_key=pin+"_last"
if body["type"]==type:
try:
xplMsg=mea_utils.xplMsgNew("me", target, "xpl-stat", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg,"device", data["device_name"].lower())
if body["request"]=="current":
mea_utils.xplMsgAddValue(xplMsg,"current",mem[current_key])
elif body["request"]=="last":
mea_utils.xplMsgAddValue(xplMsg,"last",mem[last_key])
else:
verbose(2, "ERROR (", fn_name, ") - invalid request (", body["request"],")")
return False
mea_utils.xplMsgAddValue(xplMsg,"type",type)
except:
verbose(2, "ERROR (", fn_name, ") - can't create xpl message")
return False
else:
verbose(2, "ERROR (", fn_name, ") - invalid type (", body["type"],")")
return False
mea.xplSendMsg(xplMsg)
return True
elif x["schema"]=="control.basic":
if body["type"]=="output":
if body["current"].lower()=="low":
mea.sendXbeeCmd(data["ID_XBEE"], data["ADDR_H"], data["ADDR_L"], pin, 4);
mea.sendXbeeCmd(data["ID_XBEE"], data["ADDR_H"], data["ADDR_L"], "AC", "");
return True
elif body["current"].lower()=="high":
mea.sendXbeeCmd(data["ID_XBEE"], data["ADDR_H"], data["ADDR_L"], pin, 5);
mea.sendXbeeCmd(data["ID_XBEE"], data["ADDR_H"], data["ADDR_L"], "AC", "");
return True
else:
return False
else:
verbose(2, "ERROR (", fn_name, ") - invalid request (", body["request"],")")
return False
else:
verbose(2, "ERROR (", fn_name, ") - invalid schema (", x["schema"],")")
return False
def mea_dataFromSensor(data):
fn_name=sys._getframe().f_code.co_name
xplMsg = {}
try:
id_sensor=data["device_id"]
cmd_data=data["cmd_data"]
l_cmd_data=data["l_cmd_data"]
data_type=data["data_type"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem=mea.getMemory(id_sensor)
if data_type==0x92:
mem["iodata"]=parseIOData(cmd_data, l_cmd_data)
paramsDict=mea_utils.parseKeyValueDatasToDictionary(data["device_parameters"], ",", ":")
if "pin" in paramsDict:
pin=paramsDict["pin"]
else:
return False
if "sensor_type" in paramsDict:
type=paramsDict["sensor_type"]
else:
type="generic"
current_key=pin+"_current"
last_key=pin+"_last"
if pin in mem["iodata"].lower():
val=mem["iodata"][pin]
last_val=0
try:
mem[last_key]=mem[current_key]
except:
mem[last_key]=0
strVal=""
if pin[0]=="d":
if val==1:
mem[current_key]="high"
else:
mem[current_key]="low"
logval=val
else:
if "compute" in paramsDict:
x=val
y=eval(paramsDict["compute"])
logval=round(y,2)
else:
logval=val
mem[current_key]=logval
if mem[current_key] != mem[last_key]:
if "log" in paramsDict and paramsDict["log"].lower()=="yes":
if "unit" in paramsDict:
unit=int(paramsDict["unit"])
else:
unit=0
mea.addDataToSensorsValuesTable(id_sensor,logval,unit,val,"")
xplMsg=mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg,"device", data["device_name"].lower())
mea_utils.xplMsgAddValue(xplMsg,"current", mem[current_key])
mea_utils.xplMsgAddValue(xplMsg,"type", type)
mea_utils.xplMsgAddValue(xplMsg,"last",mem[last_key])
mea.xplSendMsg(xplMsg)
return True
return False
def mea_xplCmndMsg(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
try:
id_actuator = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
except:
verbose(2, "ERROR (", fn_name, ") - parameters error")
return False
mem_actuator = mea.getMemory(id_actuator)
mem_interface = mea.getMemory("interface" + str(interface_id))
# validation du parametre
pin = 0
if "pin" in params:
pin = params["pin"]
else:
verbose(9, "DEBUG (", fn_name, ") - parameters error : no pin")
return False
if len(pin) != 2:
verbose(2, "ERROR (", fn_name, ") - PIN parameter error")
return False
if pin[0] != "l" and pin[0] != "a":
verbose(2, "ERROR (", fn_name, ") - PIN type error")
return False
else:
pinType = pin[0]
if pin[1] < "0" or pin[1] > "9":
verbose(2, "ERROR (", fn_name, ") - PIN id error")
return False
else:
pinNum = int(pin[1])
# validation du message xpl
try:
x = data["xplmsg"]
schema = x["schema"]
msgtype = x["msgtype"]
body = x["body"]
device = body["device"]
except:
verbose(2, "ERROR (", fn_name, ") - no or incomplet xpl message error")
return False
if msgtype != "xpl-cmnd":
verbose(9, data)
return False
current = False
request = False
if "current" in body:
current = body["current"]
elif "request" in body:
request = body["request"]
else:
verbose(2, "ERROR (", fn_name, ') - no "current" or "request" in message body')
return False
# préparation de la commande
_cmnd = str(pinNum) + ","
if schema == "control.basic" and typeoftype == 1:
if current == False:
verbose(2, "ERROR (", fn_name, ') - no "current" in message body')
return False
try:
type = body["type"]
except:
verbose(2, "ERROR (", fn_name, ') - no "type" in message body')
return False
if pinNum == 0 or pinNum == 3:
verbose(2, "ERROR (", fn_name, ") - PIN 0 and 3 are input only")
return False
if type == "output" and pinType == "l":
if current == "pulse":
if "data1" in body:
data1 = body["data1"]
if not data1.isdigit():
verbose(2, "ERROR (", fn_name, ") - data1 not numeric value")
return False
data1 = int(data1)
else:
data1 = 200
_cmnd = _cmnd + "P," + str(data1)
elif current == "high" or (current.isdigit() and int(current) == 1):
_cmnd = _cmnd + "L,H"
elif current == "low" or (current.isdigit() and int(current) == 0):
_cmnd = _cmnd + "L,L"
elif type == "variable" and pinType == "a":
if pinNum != 1 and pinNum != 2:
verbose(2, "ERROR (", fn_name, ") - Analog output(PWM) only available on pin 1 and 2")
return False
else:
value = 0
if "current" in mem_interface[pinNum]:
value = mem_interface[pinNum]["current"]
if current == "dec":
value = value - 1
elif current == "inc":
value = value + 1
elif current[0] == "-" or current[0] == "+":
if current[1:].isdigit():
value = int(current)
else:
verbose(2, "ERROR (", fn_name, ") - analog value error (", current, ")")
return False
elif current.isdigit():
value = int(current)
else:
verbose(2, "ERROR (", fn_name, ") - analog value error (", current, ")")
return False
if value < 0:
value = 0
if value > 255:
value = 255
_cmnd = _cmnd + "A," + str(value)
else:
verbose(2, "ERROR (", fn_name, ") - xpl command error")
return False
elif schema == "sensor.basic":
if request == False:
verbose(2, "ERROR (", fn_name, ') - no "request" in message body')
return False
if request != "current":
verbose(2, "ERROR (", fn_name, ") - xpl error request!=current")
return False
if typeoftype == 0:
if pinType == "a" and pinNum < 4:
verbose(2, "ERROR (", fn_name, ") - Analog input only available on pin 4 to pin 9")
return False
_cmnd = _cmnd + pinType.upper() + ",G"
else:
_cmnd = False
# interrogation de l'état d'une sortie, on récupére de l'info aux niveaux de l'interface si dispo
if not "current" in mem_interface[pinNum]:
return False
current_value = mem_interface[pinNum]["current"]
if pinType == "l":
if current_value == 0:
current_value = "low"
else:
current_value = "high"
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", current_value)
mea.xplSendMsg(xplMsg)
return True
else:
verbose(9, data)
verbose(2, "ERROR (", fn_name, ") - xpl schema incompatible with sensor/actuator (", schema, ")")
return False
if _cmnd != False:
cmnd = "~~~~CMD:##" + _cmnd + "##\r\nEND\r\n"
# verbose(9, cmnd)
mea.sendSerialData(data["fd"], bytearray(cmnd))
return True
def mea_xplCmndMsg(data):
fn_name = sys._getframe().f_code.co_name
try:
id_sensor = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return 0
mem = mea.getMemory(id_sensor)
paramsDict = mea_utils.parseKeyValueDatasToDictionary(
data["device_parameters"], ",", ":")
if "pin" in paramsDict:
pin = paramsDict["pin"].lower()
else:
return False
if "sensor_type" in paramsDict:
type = paramsDict["sensor_type"]
else:
type = "generic"
x = data["xplmsg"]
body = x["body"]
target = "*"
if "source" in x:
target = x["source"]
if x["schema"] == "sensor.request":
current_key = pin + "_current"
last_key = pin + "_last"
if body["type"] == type:
try:
xplMsg = mea_utils.xplMsgNew("me", target, "xpl-stat",
"sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device",
data["device_name"].lower())
if body["request"] == "current":
mea_utils.xplMsgAddValue(xplMsg, "current",
mem[current_key])
elif body["request"] == "last":
mea_utils.xplMsgAddValue(xplMsg, "last", mem[last_key])
else:
verbose(2, "ERROR (", fn_name, ") - invalid request (",
body["request"], ")")
return False
mea_utils.xplMsgAddValue(xplMsg, "type", type)
except:
verbose(2, "ERROR (", fn_name, ") - can't create xpl message")
return False
else:
verbose(2, "ERROR (", fn_name, ") - invalid type (", body["type"],
")")
return False
mea.xplSendMsg(xplMsg)
return True
elif x["schema"] == "control.basic":
if body["type"] == "output":
if body["current"].lower() == "low":
mea.sendXbeeCmd(data["ID_XBEE"], data["ADDR_H"],
data["ADDR_L"], pin, 4)
mea.sendXbeeCmd(data["ID_XBEE"], data["ADDR_H"],
data["ADDR_L"], "AC", "")
return True
elif body["current"].lower() == "high":
mea.sendXbeeCmd(data["ID_XBEE"], data["ADDR_H"],
data["ADDR_L"], pin, 5)
mea.sendXbeeCmd(data["ID_XBEE"], data["ADDR_H"],
data["ADDR_L"], "AC", "")
return True
else:
return False
else:
verbose(2, "ERROR (", fn_name, ") - invalid request (",
body["request"], ")")
return False
else:
verbose(2, "ERROR (", fn_name, ") - invalid schema (", x["schema"],
")")
return False
def mea_xplCmndMsg(data):
fn_name=sys._getframe().f_code.co_name
print data
try:
id_sensor=data["device_id"]
parameters=data["device_parameters"]
# id_driver=data["driver_id"]
api_key=data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return 0
mem=mea.getMemory(id_sensor)
paramsDict=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
x=data["xplmsg"]
body=x["body"]
target="*"
if "source" in x:
target=x["source"]
channel = -1;
current = -1;
if x["schema"]=="control.basic":
try:
if body["type"] == "output":
if body["current"]=="high":
current = 100;
elif body["current"]=="low":
current = 0;
if paramsDict["channel"]=="A":
channel = 0;
elif paramsDict["channel"]=="B":
channel = 1;
if channel <> -1 and current <> -1:
buf=bytearray();
buf.append(0x01)
buf.append(channel & 0b11111)
buf.append(current & 0b1111111)
# mea.sendEnoceanRadioErp1Packet(data["ID_ENOCEAN"], 0xD2, 0, data["ENOCEAN_ADDR"], buf)
# mea.interfaceAPI(id_driver, api_key, "sendEnoceanRadioErp1Packet", data["ID_ENOCEAN"], 0xD2, 0, data["ENOCEAN_ADDR"], buf)
# mea.interfaceAPI(id_driver, api_key, "sendEnoceanRadioErp1Packet", 0xD2, 0, data["ENOCEAN_ADDR"], buf)
mea.interfaceAPI(api_key, "sendEnoceanRadioErp1Packet", 0xD2, 0, data["ENOCEAN_ADDR"], buf)
except Exception as e:
verbose(2, "ERROR (", fn_name, ") - can't create enocean packet ", str(e))
return False
elif x["schema"]=="sensor.request":
try:
xplMsg=mea_utils.xplMsgNew("me", target, "xpl-stat", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg,"device", data["device_name"].lower())
if body["request"]=="current":
mea_utils.xplMsgAddValue(xplMsg,"current",mem["current"])
elif body["request"]=="last":
mea_utils.xplMsgAddValue(xplMsg,"last",mem["last"])
else:
verbose(2, "ERROR (", fn_name, ") - invalid request (", body["request"],")")
return False
mea_utils.xplMsgAddValue(xplMsg,"type","input")
except:
verbose(2, "ERROR (", fn_name, ") - can't create xpl message")
return False
mea.xplSendMsg(xplMsg)
return True
return False
def mea_dataFromSensor(data):
fn_name=str(sys._getframe().f_code.co_name) + "/" + __name__
parameters=False
try:
id_sensor=data["device_id"]
device=data["device_name"]
serial_data=data["data"]
l_serial_data=data["l_data"]
toDbFlag=data["todbflag"]
# parameters=data["device_parameters"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem=mea.getMemory(id_sensor)
# récupération des paramétres
if parameters <> False:
params=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
# faire ce qu'il faut ici avec les parametres
# conversion des données si nécessaire
# récupération des données dans une chaine de caractères unicode
s=serial_data.decode('latin-1')
# traitement des données
# récupère (ou pas) un SMS dans les données
sms=mea_getSMS(s)
if sms[0] == False:
if sms[1] == 1:
verbose(2, "ERROR (", fn_name, ") - incomplete SMS data")
else:
verbose(9, "DEBUG (", fn_name, ") - not a SMS")
return False
# analyse des données
alarm=_analyseData(sms[1])
if alarm[0] == False:
verbose(9, "DEBUG (", fn_name, ") - not an EPG message : ", alarm[1])
return False
verbose(9, alarm)
# vérification validité
try:
last_date = datetime.strptime( mem['date']+"-"+ mem['time'], '%d/%m/%Y-%H:%M:%S')
except:
last_date = datetime.fromtimestamp(0);
try:
current_date = datetime.strptime( alarm[2]+"-"+ alarm[3], '%d/%m/%Y-%H:%M:%S')
except:
verbose(9, "ERROR (", fn_name, ") - EPG message date and time error : ", alarm[2]+"-"+alarm[3]+" ?")
return False
if current_date < last_date:
verbose(9, "ERROR (", fn_name, ") - older EPG message than previous received")
return False
now = datetime.now()
d = (now - current_date).total_seconds() / 60;
verbose (9, d)
if d > 15:
verbose(9, "ERROR (", fn_name, ") - too old EPG message")
return False
# memorisation des données
try:
mem['last']=mem['current']
except:
mem['last']=-1
mem['current']=alarm[0]
if alarm[1]==False:
who="";
else:
who=str(alarm[1])
mem['who']=who
mem['date']=str(alarm[2])
mem['time']=str(alarm[3])
mea.addDataToSensorsValuesTable(id_sensor,mem['current'],0,0,who)
# emission XPL
xplMsg=mea_utils.xplMsgNew('me', "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", data["device_name"])
mea_utils.xplMsgAddValue(xplMsg, 'current', mem['current'])
mea.xplSendMsg(xplMsg)
return True
def mea_dataFromSensor(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
# verbose(9, "DEBUG (", fn_name, ") data = ", data)
try:
device_id = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem_device = mea.getMemory(device_id)
mem_interface = mea.getMemory("interface" + str(interface_id))
# validation du parametre
pin = 0
try:
pin = params["pin"]
except:
verbose(2, "ERROR (", fn_name, ") - ", device_name,
" parameters error : no PIN defined")
return False
if len(pin) != 2:
verbose(2, "ERROR (", fn_name, ") - ", device_name,
" PIN format error")
return False
if pin[0] != 'l' and pin[0] != 'a':
verbose(2, "ERROR (", fn_name, ") - ", device_name, " PIN type error")
return Flase
else:
pinType = pin[0]
if pin[1] < '0' or pin[1] > '9':
verbose(2, "ERROR (", fn_name, ") - ", device_name,
" PIN number error")
return False
else:
pinNum = int(pin[1])
# on va traiter les données prémachées par mea_serialDataPre
if "sendFlag" in mem_interface[pinNum] and mem_interface[pinNum][
"sendFlag"] == True:
if "current" in mem_interface[pinNum]:
current_value = mem_interface[pinNum]["current"]
if pinType == 'l':
if mem_interface[pinNum]["current"] == 0:
current_value = "low"
else:
current_value = "high"
mea.addDataToSensorsValuesTable(device_id,
mem_interface[pinNum]["current"],
0, 0, "")
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor",
"basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", current_value)
mea.xplSendMsg(xplMsg)
return True
return False
def mea_dataFromSensor(data):
fn_name=sys._getframe().f_code.co_name
try:
id_sensor=data["device_id"]
verbose(1, "DEBUG (", fn_name, ") - id_sensor=", id_sensor)
packet=data["data"]
l_packet=data["l_data"]
parameters=data["device_parameters"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem=mea.getMemory(id_sensor)
paramsDict=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
device1=0
device2=0
try:
device=paramsDict["xpldevice"];
except:
device=-1;
if packet[4]==1: # ENOCEAN_RADIO_ERP1
if packet[6]==0xF6:
t21 = (packet[12] & 0b00100000) >> 5
nu = (packet[12] & 0b00010000) >> 4
if t21 == 1:
if nu == 1:
button1Num = (packet[7] & 0b11100000) >> 5
button2Num = -1;
action = (packet[7] & 0b00010000) >> 4
if packet[7] & 0b00000001:
button2Num=(packet[7] & 0b00001110) >> 1
current=""
try:
if paramsDict["channel"]=="A" and action == 1:
if (button1Num == 0 or button2Num == 0):
current="high"
elif (button1Num == 1 or button2Num == 1):
current="low"
if paramsDict["channel"]=="B" and action == 1:
if (button1Num == 2 or button2Num == 2):
current="high"
elif (button1Num == 3 or button2Num == 3):
current="low"
except:
return False
if current != "":
try:
mem["last"]=mem["current"]
except:
mem["last"]=False
mem["current"]=current
mem["button1"]=button1Num
mem["button2"]=button2Num
internal=-1
if(device!=-1):
try:
internal=int(paramsDict["internal"])
except:
internal=0
broadcastXplDirectControlBasic(internal, paramsDict["channel"], button1Num, button2Num, device);
xplMsg=mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg,"device", data["device_name"].lower())
mea_utils.xplMsgAddValue(xplMsg,"current", mem["current"])
mea_utils.xplMsgAddValue(xplMsg,"type", "input")
mea_utils.xplMsgAddValue(xplMsg,"last",mem["last"])
mea.xplSendMsg(xplMsg)
return True
# else: # bouton relache
# if mem["button1"] != -1:
# verbose(2, "Relachement de : ", mem["button1"])
# if mem["button2"] != -1:
# verbose(2, "Relachement de : ", mem["button2"])
# mem["button1"]=-1
# mem["button2"]=-1
# verbose(2,"Nb boutons appuyes = ", (packet[7] & 0b11100000) >> 5)
# verbose(2,"Energy bow = ", (packet[7] & 0b00010000) >> 4)
# return True
return False
def mea_dataFromSensor(data):
fn_name = sys._getframe().f_code.co_name
try:
id_sensor = data["device_id"]
verbose(1, "DEBUG (", fn_name, ") - id_sensor=", id_sensor)
packet = data["data"]
l_packet = data["l_data"]
parameters = data["device_parameters"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem = mea.getMemory(id_sensor)
paramsDict = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
device1 = 0
device2 = 0
try:
device = paramsDict["xpldevice"]
except:
device = -1
if packet[4] == 1: # ENOCEAN_RADIO_ERP1
if packet[6] == 0xF6:
t21 = (packet[12] & 0b00100000) >> 5
nu = (packet[12] & 0b00010000) >> 4
if t21 == 1:
if nu == 1:
button1Num = (packet[7] & 0b11100000) >> 5
button2Num = -1
action = (packet[7] & 0b00010000) >> 4
if packet[7] & 0b00000001:
button2Num = (packet[7] & 0b00001110) >> 1
current = ""
try:
if paramsDict["channel"] == "A" and action == 1:
if (button1Num == 0 or button2Num == 0):
current = "high"
elif (button1Num == 1 or button2Num == 1):
current = "low"
if paramsDict["channel"] == "B" and action == 1:
if (button1Num == 2 or button2Num == 2):
current = "high"
elif (button1Num == 3 or button2Num == 3):
current = "low"
except:
return False
if current != "":
try:
mem["last"] = mem["current"]
except:
mem["last"] = False
mem["current"] = current
mem["button1"] = button1Num
mem["button2"] = button2Num
internal = -1
if (device != -1):
try:
internal = int(paramsDict["internal"])
except:
internal = 0
broadcastXplDirectControlBasic(
internal, paramsDict["channel"], button1Num,
button2Num, device)
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig",
"sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device",
data["device_name"].lower())
mea_utils.xplMsgAddValue(xplMsg, "current",
mem["current"])
mea_utils.xplMsgAddValue(xplMsg, "type", "input")
mea_utils.xplMsgAddValue(xplMsg, "last", mem["last"])
mea.xplSendMsg(xplMsg)
return True
# else: # bouton relache
# if mem["button1"] != -1:
# verbose(2, "Relachement de : ", mem["button1"])
# if mem["button2"] != -1:
# verbose(2, "Relachement de : ", mem["button2"])
# mem["button1"]=-1
# mem["button2"]=-1
# verbose(2,"Nb boutons appuyes = ", (packet[7] & 0b11100000) >> 5)
# verbose(2,"Energy bow = ", (packet[7] & 0b00010000) >> 4)
# return True
return False
def mea_dataFromSensor(data):
fn_name = sys._getframe().f_code.co_name
xplMsg = {}
try:
id_sensor = data["device_id"]
cmd_data = data["cmd_data"]
l_cmd_data = data["l_cmd_data"]
data_type = data["data_type"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem = mea.getMemory(id_sensor)
if data_type == 0x92:
mem["iodata"] = parseIOData(cmd_data, l_cmd_data)
paramsDict = mea_utils.parseKeyValueDatasToDictionary(
data["device_parameters"], ",", ":")
if "pin" in paramsDict:
pin = paramsDict["pin"]
else:
return False
if "sensor_type" in paramsDict:
type = paramsDict["sensor_type"]
else:
type = "generic"
current_key = pin + "_current"
last_key = pin + "_last"
if pin in mem["iodata"].lower():
val = mem["iodata"][pin]
last_val = 0
try:
mem[last_key] = mem[current_key]
except:
mem[last_key] = 0
strVal = ""
if pin[0] == "d":
if val == 1:
mem[current_key] = "high"
else:
mem[current_key] = "low"
logval = val
else:
if "compute" in paramsDict:
x = val
y = eval(paramsDict["compute"])
logval = round(y, 2)
else:
logval = val
mem[current_key] = logval
if mem[current_key] != mem[last_key]:
if "log" in paramsDict and paramsDict["log"].lower() == "yes":
if "unit" in paramsDict:
unit = int(paramsDict["unit"])
else:
unit = 0
mea.addDataToSensorsValuesTable(id_sensor, logval, unit,
val, "")
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor",
"basic")
mea_utils.xplMsgAddValue(xplMsg, "device",
data["device_name"].lower())
mea_utils.xplMsgAddValue(xplMsg, "current", mem[current_key])
mea_utils.xplMsgAddValue(xplMsg, "type", type)
mea_utils.xplMsgAddValue(xplMsg, "last", mem[last_key])
mea.xplSendMsg(xplMsg)
return True
return False
def mea_xplCmndMsg(data):
fn_name=sys._getframe().f_code.co_name
try:
id_sensor=data["device_id"]
parameters=data["device_parameters"]
typeoftype=data["typeoftype"]
# id_driver=data["driver_id"]
api_key=data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return 0
# verbose(1, mea.interfaceAPI(id_driver, api_key, "test"))
mem=mea.getMemory(id_sensor)
paramsDict=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
x=data["xplmsg"]
body=x["body"]
target="*"
if "source" in x:
target=x["source"]
channel = -1;
current = -1;
if x["schema"]=="control.basic" and typeoftype == 1:
try:
if body["type"] == "output":
if body["current"]=="high":
current = 100;
elif body["current"]=="low":
current = 0;
if current <> -1:
channel = ord(paramsDict["channel"][0]) - ord('A');
buf=bytearray()
buf.append(0x01)
buf.append(channel & 0b11111)
buf.append(current & 0b1111111)
# mea.sendEnoceanRadioErp1Packet(data["ID_ENOCEAN"], 0xD2, 0, data["ENOCEAN_ADDR"], buf)
# mea.interfaceAPI(id_driver, api_key, "sendEnoceanRadioErp1Packet", 0xD2, 0, data["ENOCEAN_ADDR"], buf)
mea.interfaceAPI(api_key, "sendEnoceanRadioErp1Packet", 0xD2, 0, data["ENOCEAN_ADDR"], buf)
try:
if paramsDict["force_status"]=="yes":
channel = ord(paramsDict["channel"][0]) - ord('A');
buf=bytearray()
buf.append(0x03)
buf.append(channel & 0b11111)
# mea.sendEnoceanRadioErp1Packet(data["ID_ENOCEAN"], 0xD2, 0, data["ENOCEAN_ADDR"], buf)
# mea.interfaceAPI(id_driver, api_key, "sendEnoceanRadioErp1Packet", 0xD2, 0, data["ENOCEAN_ADDR"], buf)
mea.interfaceAPI(api_key, "sendEnoceanRadioErp1Packet", 0xD2, 0, data["ENOCEAN_ADDR"], buf)
except Exception as e:
verbose(2, "ERROR (", fn_name, ") - can't query device: ", str(e))
pass
except Exception as e:
verbose(2, "ERROR (", fn_name, ") - can't create/send enocean packet: ", str(e))
return False
elif x["schema"]=="sensor.request" and typeoftype == 0:
if body["request"]=="current":
try:
buf=bytearray()
channel = ord(paramsDict["channel"][0]) - ord('A');
buf.append(0x03);
buf.append(channel & 0b11111);
# mea.sendEnoceanRadioErp1Packet(data["ID_ENOCEAN"], 0xD2, 0, data["ENOCEAN_ADDR"], buf)
# mea.interfaceAPI(id_driver, api_key,"sendEnoceanRadioErp1Packet", 0xD2, 0, data["ENOCEAN_ADDR"], buf)
mea.interfaceAPI(api_key,"sendEnoceanRadioErp1Packet", 0xD2, 0, data["ENOCEAN_ADDR"], buf)
except Exception as e:
verbose(2, "ERROR (", fn_name, ") - can't query device: ", str(e))
return False
else:
verbose(2, "ERROR (", fn_name, ") - invalid request (", body["request"],")")
return False
return True
return False
