def __init__(self, ui, dbgio):
self.ui = ui
self.dbgio = dbgio
self.device = vendor.get_device(self.ui, soc_name)
self.dbgio.connect(self.device.cpu_info.name, 'swd')
self.cpu = cortexm.cortexm(self, ui, self.dbgio, self.device)
self.device.bind_cpu(self.cpu)
self.mem = mem.mem(self.cpu)
self.flash = flash.flash(flash_driver.stm32l4x2(self.device),
self.device, self.mem)
gpio_drv = (gpio_driver.drv(self.device, gpio_cfg))
self.gpio = gpio.gpio(gpio_drv)
self.menu_root = (
('cpu', self.cpu.menu, 'cpu functions'),
('da', self.cpu.cmd_disassemble, cortexm.help_disassemble),
('debugger', self.dbgio.menu, 'debugger functions'),
('exit', self.cmd_exit),
('flash', self.flash.menu, 'flash functions'),
('go', self.cpu.cmd_go),
('gpio', self.gpio.menu, 'gpio functions'),
('halt', self.cpu.cmd_halt),
('help', self.ui.cmd_help),
('history', self.ui.cmd_history, cli.history_help),
('map', self.device.cmd_map),
('mem', self.mem.menu, 'memory functions'),
('program', self.flash.cmd_program, flash.help_program),
('regs', self.cmd_regs, soc.help_regs),
('vtable', self.cpu.cmd_vtable),
)
self.ui.cli.set_root(self.menu_root)
self.set_prompt()
self.dbgio.cmd_info(self.ui, None)
def __init__(self, ui, dbgio):
self.ui = ui
self.dbgio = dbgio
self.device = vendor.get_device(self.ui, soc_name)
self.dbgio.connect(self.device.cpu_info.name, "swd")
self.cpu = cortexm.cortexm(self, ui, self.dbgio, self.device)
self.device.bind_cpu(self.cpu)
self.mem = mem.mem(self.cpu)
self.flash = flash.flash(flash_driver.stm32f0xx(self.device), self.device, self.mem)
gpio_drv = gpio_driver.drv(self.device, gpio_cfg)
self.gpio = gpio.gpio(gpio_drv)
self.i2c = i2c.i2c(i2c_driver.gpio(gpio_drv, "PB6", "PB7"))
self.menu_root = (
("cpu", self.cpu.menu, "cpu functions"),
("da", self.cpu.cmd_disassemble, cortexm.help_disassemble),
("debugger", self.dbgio.menu, "debugger functions"),
("exit", self.cmd_exit),
("flash", self.flash.menu, "flash functions"),
("go", self.cpu.cmd_go),
("gpio", self.gpio.menu, "gpio functions"),
("halt", self.cpu.cmd_halt),
("help", self.ui.cmd_help),
("history", self.ui.cmd_history, cli.history_help),
("i2c", self.i2c.menu, "i2c functions"),
("map", self.device.cmd_map),
("mem", self.mem.menu, "memory functions"),
("program", self.flash.cmd_program, flash.help_program),
("regs", self.cmd_regs, soc.help_regs),
("vtable", self.cpu.cmd_vtable),
)
self.ui.cli.set_root(self.menu_root)
self.set_prompt()
self.dbgio.cmd_info(self.ui, None)
def get_mem_power_spectra(vq, trajectory, parameters):
test_frequency_range = np.array(parameters.frequency_range)
# Check number of coefficients
if vq.shape[0] <= parameters.number_of_coefficients_mem + 1:
print(
'Number of coefficients should be smaller than the number of time steps'
)
exit()
psd_vector = []
if not parameters.silent:
_progress_bar(0, 'M. Entropy')
for i in range(vq.shape[1]):
psd_vector.append(
mem.mem(test_frequency_range,
vq[:, i],
trajectory.get_time_step_average(),
coefficients=parameters.number_of_coefficients_mem))
if not parameters.silent:
_progress_bar(float(i + 1) / vq.shape[1], 'M. Entropy')
psd_vector = np.array(psd_vector).T
return psd_vector * unit_conversion
def __init__(self, ui, dbgio):
self.ui = ui
self.dbgio = dbgio
self.device = vendor.get_device(self.ui, soc_name)
self.dbgio.connect(self.device.cpu_info.name, 'swd')
self.cpu = cortexm.cortexm(self, ui, self.dbgio, self.device)
self.device.bind_cpu(self.cpu)
self.mem = mem.mem(self.cpu)
self.flash = flash.flash(flash_driver.flash(self.device), self.device, self.mem)
self.menu_root = (
('cpu', self.cpu.menu, 'cpu functions'),
('da', self.cpu.cmd_disassemble, cortexm.help_disassemble),
('debugger', self.dbgio.menu, 'debugger functions'),
('exit', self.cmd_exit),
('flash', self.flash.menu, 'flash functions'),
('go', self.cpu.cmd_go),
('halt', self.cpu.cmd_halt),
('help', self.ui.cmd_help),
('history', self.ui.cmd_history, cli.history_help),
('map', self.device.cmd_map),
('mem', self.mem.menu, 'memory functions'),
('program', self.flash.cmd_program, flash.help_program),
('regs', self.cmd_regs, soc.help_regs),
('vtable', self.cpu.cmd_vtable),
)
self.ui.cli.set_root(self.menu_root)
self.set_prompt()
self.dbgio.cmd_info(self.ui, None)
def __init__(self, ui, dbgio):
self.ui = ui
self.dbgio = dbgio
self.device = imxrt.get_device(self.ui, soc_name)
self.dbgio.connect(self.device.cpu_info.name, 'swd')
self.cpu = cortexm.cortexm(self, ui, self.dbgio, self.device)
self.device.bind_cpu(self.cpu)
self.mem = mem.mem(self.cpu)
self.fw = firmware.firmware(self.cpu)
self.flexspi = flexspi.flexspi(self.device)
self.menu_root = (
('cpu', self.cpu.menu, 'cpu functions'),
('da', self.cpu.cmd_disassemble, cortexm.help_disassemble),
('debugger', self.dbgio.menu, 'debugger functions'),
('exit', self.cmd_exit),
('flexspi', self.flexspi.menu, 'flexspi functions'),
('fw', self.fw.menu, 'firmware functions'),
('go', self.cpu.cmd_go),
('halt', self.cpu.cmd_halt),
('help', self.ui.cmd_help),
('history', self.ui.cmd_history, cli.history_help),
('map', self.device.cmd_map),
('mem', self.mem.menu, 'memory functions'),
('regs', self.cmd_regs, soc.help_regs),
('vtable', self.cpu.cmd_vtable),
)
self.ui.cli.set_root(self.menu_root)
self.set_prompt()
self.dbgio.cmd_info(self.ui, None)
def ERA(self, namef):
self.memory.printMemory()
self.namef = namef
self.contParameters = 0
self.variablesOfFunction = list(self.directory[self.namef]['vars'])
newMemory = mem.mem(
) #Se crea una nueva instancia de memoria para la nueva funcion
count = 0
for i in self.memory.memory:
if i is not None:
newMemory.save(i, count)
count = count + 1
self.listOfMemories.append(self.memory)
self.memory = newMemory
def __init__(self, ui, dbgio):
self.ui = ui
self.dbgio = dbgio
self.device = vendor.get_device(self.ui, soc_name)
# add the 8MiB SDRAM
self.device.insert(
soc.make_peripheral('sdram', 0xc0000000, 8 << 20, None,
'external sdram'))
self.dbgio.connect(self.device.cpu_info.name, 'swd')
self.cpu = cortexm.cortexm(self, ui, self.dbgio, self.device)
self.device.bind_cpu(self.cpu)
self.mem = mem.mem(self.cpu)
self.flash = flash.flash(flash_driver.sdrv(self.device), self.device,
self.mem)
gpio_drv = (gpio_driver.drv(self.device, gpio_cfg))
self.gpio = gpio.gpio(gpio_drv)
self.i2c1 = i2c.i2c(i2c_driver.bitbang(gpio_drv, 'PB8', 'PB9'))
self.i2c3 = i2c.i2c(i2c_driver.bitbang(gpio_drv, 'PH7', 'PH8'))
# setup the rtt client
ram = self.device.sram
self.rtt = rtt.rtt(self.cpu, mem.region('ram', ram.address, ram.size))
self.menu_root = (
('cpu', self.cpu.menu, 'cpu functions'),
('da', self.cpu.cmd_disassemble, cortexm.help_disassemble),
('debugger', self.dbgio.menu, 'debugger functions'),
('exit', self.cmd_exit),
('flash', self.flash.menu, 'flash functions'),
('go', self.cpu.cmd_go),
('gpio', self.gpio.menu, 'gpio functions'),
('halt', self.cpu.cmd_halt),
('help', self.ui.cmd_help),
('history', self.ui.cmd_history, cli.history_help),
('i2c1', self.i2c1.menu, 'i2c1 functions'),
('i2c3', self.i2c3.menu, 'i2c3 functions'),
('map', self.device.cmd_map),
('mem', self.mem.menu, 'memory functions'),
('program', self.flash.cmd_program, flash.help_program),
('regs', self.cmd_regs, soc.help_regs),
('rtt', self.rtt.menu, 'rtt client functions'),
('vtable', self.cpu.cmd_vtable),
)
self.ui.cli.set_root(self.menu_root)
self.set_prompt()
self.dbgio.cmd_info(self.ui, None)
def __init__(self, ui, dbgio):
self.ui = ui
self.dbgio = dbgio
self.device = vendor.get_device(self.ui, soc_name)
self.dbgio.connect(self.device.cpu_info.name, 'swd')
self.cpu = cortexm.cortexm(self, ui, self.dbgio, self.device)
self.device.bind_cpu(self.cpu)
self.mem = mem.mem(self.cpu)
self.flash = flash.flash(flash_driver.sdrv(self.device), self.device,
self.mem)
gpio_drv = (gpio_driver.drv(self.device, gpio_cfg))
self.gpio = gpio.gpio(gpio_drv)
self.i2c = i2c.i2c(i2c_driver.gpio(gpio_drv, 'PB6', 'PB9'))
self.dac = dac.cs43l22(self.i2c, 0x94, self.dac_reset)
# setup the rtt client
ram = self.device.sram
self.rtt = rtt.rtt(self.cpu, mem.region('ram', ram.address, ram.size))
# setup the gdb server
self.gdb = gdb.gdb(self.cpu)
self.menu_root = (
('cpu', self.cpu.menu, 'cpu functions'),
('da', self.cpu.cmd_disassemble, cortexm.help_disassemble),
('dac', self.dac.menu, 'dac functions'),
('debugger', self.dbgio.menu, 'debugger functions'),
('exit', self.cmd_exit),
('flash', self.flash.menu, 'flash functions'),
('gdb', self.gdb.run),
('go', self.cpu.cmd_go),
('gpio', self.gpio.menu, 'gpio functions'),
('halt', self.cpu.cmd_halt),
('help', self.ui.cmd_help),
('history', self.ui.cmd_history, cli.history_help),
('i2c', self.i2c.menu, 'i2c functions'),
('map', self.device.cmd_map),
('mem', self.mem.menu, 'memory functions'),
('program', self.flash.cmd_program, flash.help_program),
('regs', self.cmd_regs, soc.help_regs),
('rtt', self.rtt.menu, 'rtt client functions'),
('vtable', self.cpu.cmd_vtable),
)
self.ui.cli.set_root(self.menu_root)
self.set_prompt()
self.dbgio.cmd_info(self.ui, None)
def __init__(self, ui, dbgio):
self.ui = ui
self.dbgio = dbgio
self.device = vendor.get_device(self.ui, soc_name)
self.dbgio.connect(self.device.cpu_info.name, 'swd')
self.cpu = cortexm.cortexm(self, ui, self.dbgio, self.device)
self.device.bind_cpu(self.cpu)
self.mem = mem.mem(self.cpu)
self.flash = flash.flash(flash_driver.sdrv(self.device), self.device, self.mem)
gpio_drv = (gpio_driver.drv(self.device, gpio_cfg))
self.gpio = gpio.gpio(gpio_drv)
self.i2c = i2c.i2c(i2c_driver.gpio(gpio_drv, 'PB6', 'PB9'))
self.dac = dac.cs43l22(self.i2c, 0x94, self.dac_reset)
# setup the rtt client
ram = self.device.sram
self.rtt = rtt.rtt(self.cpu, mem.region('ram', ram.address, ram.size))
# setup the gdb server
self.gdb = gdb.gdb(self.cpu)
self.menu_root = (
('cpu', self.cpu.menu, 'cpu functions'),
('da', self.cpu.cmd_disassemble, cortexm.help_disassemble),
('dac', self.dac.menu, 'dac functions'),
('debugger', self.dbgio.menu, 'debugger functions'),
('exit', self.cmd_exit),
('flash', self.flash.menu, 'flash functions'),
('gdb', self.gdb.run),
('go', self.cpu.cmd_go),
('gpio', self.gpio.menu, 'gpio functions'),
('halt', self.cpu.cmd_halt),
('help', self.ui.cmd_help),
('history', self.ui.cmd_history, cli.history_help),
('i2c', self.i2c.menu, 'i2c functions'),
('map', self.device.cmd_map),
('mem', self.mem.menu, 'memory functions'),
('program', self.flash.cmd_program, flash.help_program),
('regs', self.cmd_regs, soc.help_regs),
('rtt', self.rtt.menu, 'rtt client functions'),
('vtable', self.cpu.cmd_vtable),
)
self.ui.cli.set_root(self.menu_root)
self.set_prompt()
self.dbgio.cmd_info(self.ui, None)
def mem_test():
clk = Signal(bool(0))
rnw = Signal(bool(1))
di = Signal(intbv(0)[WIDTH:])
do = Signal(intbv(0)[WIDTH:])
a = Signal(intbv(0)[WIDTH:])
mem_inst = mem(do, di, a, rnw, clk, width=WIDTH, depth=DEPTH)
DELAY = delay(PERIOD // 2)
@always(DELAY)
def clkgen():
clk.next = not clk
@instance
def monitor():
while True:
print "%d MEM[%s] do %s di %s" % (rnw, BIN(a), BIN(do), BIN(di))
yield DELAY
@instance
def stimulus():
def write(byte, adr):
a.next = adr
di.next = byte
yield clk.posedge
rnw.next = 0
yield clk.posedge
rnw.next = 1
yield clk.posedge
for step in range(STEPS):
yield write(step << 4, step)
raise StopSimulation
return mem_inst, clkgen, monitor, stimulus
def __init__(self, ui, jtag_driver):
self.ui = ui
self.jtag_driver = jtag_driver
self.soc = esp32.make_soc()
self.cpu = esp32.xtensa(ui, jtag_driver, _ofs, _ir_chain, self.soc)
self.soc.bind_cpu(self.cpu)
self.mem = mem.mem(self.cpu)
self.menu_root = (
('esp32', self.cpu.menu, 'esp32 functions'),
('jtag', self.jtag_driver.menu, 'jtag functions'),
('exit', self.cmd_exit),
('help', self.ui.cmd_help),
('history', self.ui.cmd_history, cli.history_help),
('map', self.soc.cmd_map),
('regs', self.cmd_regs, soc.help_regs),
('mem', self.mem.menu, 'memory functions'),
)
self.ui.cli.set_root(self.menu_root)
self.set_prompt()
self.jtag_driver.cmd_info(self.ui, None)
item += 'COMMIT'.ljust(15)
print(item)
# Main Code
while (len(ROB) > 0) | (cycle == 1):
# ISSUE stage
if (PC.PC < len(instructions)) & (PC.valid == 1):
issue(cycle, PC, instructions, ROB, size_ROB, rs_int_adder,
rs_fp_adder, rs_fp_multi, ld_sd_queue, size_ld_sd_queue, rat_int,
rat_fp)
# EXE stage
exe(fu_int_adder, time_fu_int_adder, fu_fp_adder, time_fu_fp_adder,
fu_fp_multi, time_fu_fp_multi, results_buffer, rs_int_adder,
rs_fp_adder, rs_fp_multi, ld_sd_exe, time_ld_sd_exe, ld_sd_queue,
cycle, ROB, PC)
# MEM stage
mem(ld_sd_queue, ld_sd_mem, time_ld_sd_mem, results_buffer, memory, ROB,
cycle)
# CDB stage
wb(cdb, rat_int, rat_fp, rs_int_adder, rs_fp_adder, rs_fp_multi,
ld_sd_queue, ROB, cycle, results_buffer)
# COMMIT stage
commit(ROB, reg_int, reg_fp, cycle, instructions)
# cycle number
cycle += 1
def mem_coefficient_scan_analysis(vq, trajectory, parameters):
from dynaphopy.analysis.fitting import fitting_functions
mem_full_dict = {}
for i in range(vq.shape[1]):
test_frequency_range = parameters.frequency_range
fit_data = []
scan_params = []
power_spectra = []
if not parameters.silent:
_progress_bar(0, 'ME Coeff.')
for number_of_coefficients in parameters.mem_scan_range:
power_spectrum = mem.mem(test_frequency_range,
vq[:, i],
trajectory.get_time_step_average(),
coefficients=number_of_coefficients)
power_spectrum *= unit_conversion
guess_height = np.max(power_spectrum)
guess_position = test_frequency_range[np.argmax(power_spectrum)]
Fitting_function_class = fitting_functions.fitting_functions[
parameters.fitting_function]
if np.isnan(power_spectrum).any():
print(('Warning: power spectrum error, skipping point {0}'.
format(number_of_coefficients)))
continue
# Fitting_curve = fitting_functions[parameters.fitting_function]
fitting_function = Fitting_function_class(
test_frequency_range,
power_spectrum,
guess_height=guess_height,
guess_position=guess_position)
fitting_parameters = fitting_function.get_fitting()
if not fitting_parameters['all_good']:
print(('Warning: Fitting error, skipping point {0}'.format(
number_of_coefficients)))
continue
# frequency = fitting_parameters['peak_position']
area = fitting_parameters['area']
width = fitting_parameters['width']
# base_line = fitting_parameters['base_line']
maximum = fitting_parameters['maximum']
error = fitting_parameters['global_error']
fit_data.append([number_of_coefficients, width, error, area])
scan_params.append(fitting_function._fit_params)
power_spectra.append(power_spectrum)
if not (parameters.silent):
_progress_bar(
float(number_of_coefficients + 1) /
parameters.mem_scan_range[-1], "M.E. Method")
fit_data = np.array(fit_data).T
if fit_data.size == 0:
continue
best_width = np.average(fit_data[1], weights=np.sqrt(1. / fit_data[2]))
best_index = int(np.argmin(fit_data[2]))
power_spectrum = power_spectra[best_index]
mem_full_dict.update({
i: [power_spectrum, best_width, best_index, fit_data, scan_params]
})
for i in range(vq.shape[1]):
if not i in list(mem_full_dict.keys()):
continue
print(('Peak # {0}'.format(i + 1)))
print('------------------------------------')
print(('Estimated width : {0} THz'.format(mem_full_dict[i][1])))
fit_data = mem_full_dict[i][3]
scan_params = mem_full_dict[i][4]
best_index = mem_full_dict[i][2]
print(('Position (best fit): {0} THz'.format(
scan_params[best_index][0])))
print(('Area (best fit): {0} eV'.format(fit_data[3][best_index])))
print(('Coefficients num (best fit): {0}'.format(
fit_data[0][best_index])))
print(('Fitting global error (best fit): {0}'.format(
fit_data[2][best_index])))
print("\n")
plt.figure(i + 1)
plt.suptitle('Peak {0}'.format(i + 1))
ax1 = plt.subplot2grid((2, 2), (0, 0), colspan=2)
ax2 = plt.subplot2grid((2, 2), (1, 0))
ax3 = plt.subplot2grid((2, 2), (1, 1))
ax1.set_xlabel('Number of coefficients')
ax1.set_ylabel('Width [THz]')
ax1.set_title('Peak width')
ax1.plot(fit_data[0], fit_data[1])
ax1.plot((fit_data[0][0], fit_data[0][-1]),
(mem_full_dict[i][1], mem_full_dict[i][1]), 'k-')
ax2.set_xlabel('Number of coefficients')
ax2.set_ylabel('(Global error)^-1')
ax2.set_title('Fitting error')
ax2.plot(fit_data[0], np.sqrt(1. / fit_data[2]))
ax3.set_xlabel('Frequency [THz]')
ax3.set_title('Best curve fitting')
ax3.plot(test_frequency_range,
mem_full_dict[i][0],
label='Power spectrum')
ax3.plot(test_frequency_range,
fitting_function._function(test_frequency_range,
*scan_params[best_index]),
label='{} fit'.format(fitting_function.curve_name))
plt.show()