def applyStateOld(self, state):
"""
"""
q = state.quaternion
t = numpy.array(state.translation)
o = numpy.array(state.origin)
# center the coordinates
## self.resultCoords = (self.resultCoords -
## numpy.array([o[0], o[1], o[2], 0.0]))
# center the coordinates (node-by-node)
def __center(node, o):
node.coords = node.coords - o
root = self.torTree.rootNode
root.pre_traverse(__center, root, numpy.array([o[0], o[1], o[2], 0.0]))
# construct rootNode transformation matrix
mtx = Transformation(t + o, q).getMatrix(transpose=1)
# apply the torsions
coords = self.applyAngList(state.torsions, mtx)
# must "reset" each nodes coords
def __uncenter(node, o):
node.coords = node.coords + o
root.pre_traverse(__uncenter, root,
numpy.array([o[0], o[1], o[2], 0.0]))
return coords
def applyQuaternion(self, q, o=(0., 0., 0.)):
"""Apply the given quaterion.
"""
# center the coordinates
self.resultCoords = (self.resultCoords -
numpy.array([o[0], o[1], o[2], 0.0]))
self.resultCoords = Transformation(o, q).apply(self.resultCoords)
return self.getResultCoords()
def getTorsionOnlyCoords(self):
"""Return your coordinates with no quaterion.
Don't save these coords, compute them every time.
"""
self.mol.allAtoms.setConformation(self.mol.stoc.confIndex)
self.mol.stoc.applyAngList(self.torsions,
Transformation(trans=self.origin).getMatrix(transpose=1))
return self.mol.allAtoms.coords
def applyOrientation(self, q=(0.,0.,0.,0.), t=(0.,0.,0.), o=(0.,0.,0.)):
"""origin specifies where the local origin is in world coordinates
(i.e., where is this object's origin in the world)
"""
# center the coordinates
self.resultCoords = (self.resultCoords -
Numeric.array([o[0], o[1], o[2], 0.0]))
sum = Numeric.array(t) + Numeric.array(o)
self.resultCoords = Transformation(sum, q).apply(self.resultCoords)
return self.getResultCoords()
def applyState(self, state):
"""
"""
q = state.quaternion
t = numpy.array(state.translation)
o = numpy.array(state.origin)
# construct rootNode transformation matrix
# mtx = Transformation(t+o, q).getMatrix(transpose=1)
# Corrected by AG 08/28/2008
mtx = Transformation(t, q).getMatrix().transpose()
# apply the torsions
self.applyAngList(state.torsions, mtx)
def setUp(self):
"""Called for every test."""
self.decimals = 4 # for numpy.around; 7 is SciPy default.
self.idmtx = Transformation().getMatrix(transpose=1)
self.known_points = [[1., 0., 2.], [1., 0., 1.], [1., 1., 1.],
[0., 0., 1.], [0., 0., 0.], [0., 1., 0.],
[0., 1., -1.], [1., 1., -1.], [1., 2., -1.],
[1., 1., -2.]]
npts = len(self.known_points)
dim = 3
self.max = 9999999.
self.min = -self.max
self.random_points = RandomArray.uniform(self.min, self.max,
(npts, dim)).tolist()
# create a simple torsion system for both point lists
torTree = TestTorTree()
torTree.append(TestTorsion(4, 3, [0, 1, 2]))
torTree.append(TestTorsion(3, 1, [0, 2]))
torTree.append(TestTorsion(6, 7, [8, 9]))
self.torTree = torTree
def asIndexedPolygons(self, run=1, quality=None, radius=None, **kw):
""" run=0 returns 1 if this geom can be represented as an
IndexedPolygon and None if not. run=1 returns the IndexedPolygon
object."""
#print "Cylinders.asIndexedPolygons", quality
if run == 0:
return 1 # yes, I can be represented as IndexedPolygons
import numpy.oldnumeric as Numeric, math
from mglutil.math.transformation import Transformation
if quality in [1, 2, 3, 4, 5]:
quality = quality
elif quality < 0 and self.quality in [2, 3, 4, 5]:
quality = self.quality - 2
else:
quality = self.quality - 1
quality *= 5
# make a copy of the cylinderTemplate
tmpltVertices, tmpltFaces = self._cylinderTemplateDaniel(\
quality=quality)
centers = self.vertexSet.vertices.array
faces = self.faceSet.faces.array
tmpltVertices = Numeric.array(tmpltVertices).astype('f')
tmpltFaces = Numeric.array(tmpltFaces).astype('f')
addToFaces = Numeric.ones((tmpltFaces.shape)) * 2 * len(tmpltVertices)
VV = [] # this list stores all vertices of all cylinders
FF = [] # this list stores all faces of all cylinders
# now loop over all cylinders in self
for index in xrange(len(faces)):
# tv temporarily stores the transformed unit cylinder vertices
tv = tmpltVertices.__copy__()
pt0 = centers[faces[index][0]] # bottom of cylinder
pt1 = centers[faces[index][1]] # top of cylinder
# get radius for cylinder
if radius is not None:
radx = rady = radius #override radii
elif self.oneRadius:
radx = rady = radius = self.vertexSet.radii.array[0]
else:
radx = self.vertexSet.radii.array[faces[index][1]]
rady = self.vertexSet.radii.array[faces[index][0]]
# determine scale and rotation of current cylinder
sz = 0.0
for nbr in (0, 1, 2):
sz = sz + (pt0[nbr] - pt1[nbr]) * (pt0[nbr] - pt1[nbr])
if sz <= 0.0: return
sz = math.sqrt(sz)
rx = -180.0 * math.acos((pt1[2] - pt0[2]) / sz) / math.pi
dx = pt1[0] - pt0[0]
dy = pt1[1] - pt0[1]
if math.fabs(dx) < 0.00001 and math.fabs(dy) < 0.00001:
rz = 0.0
else:
rz = -180.0 * math.atan2(dx, dy) / math.pi
# prepare rotations matrices of current cylinder
Rx = Transformation(quaternion=[1, 0, 0, rx])
if rz <= 180.0 and rz >= -180.0:
Rz = Transformation(quaternion=[0, 0, 1, rz])
R = Rz * Rx
else:
R = Rx
r = R.getMatrix()
k = 0
for v in tmpltVertices: # I DO NOT use Numeric.matrixmultiply
# here, in order to gain significant speed
v0x, v0y, v0z = v[0] # saves some lookups
v1x, v1y, v1z = v[1]
tv[k][0]=\
([r[0][0]*v0x*radx+r[1][0]*v0y*radx+r[2][0]*v0z*sz+pt0[0],
r[0][1]*v0x*radx+r[1][1]*v0y*radx+r[2][1]*v0z*sz+pt0[1],
r[0][2]*v0x*radx+r[1][2]*v0y*radx+r[2][2]*v0z*sz+pt0[2]])
tv[k][1]=\
([r[0][0]*v1x*rady+r[1][0]*v1y*rady+r[2][0]*v1z+pt0[0],
r[0][1]*v1x*rady+r[1][1]*v1y*rady+r[2][1]*v1z+pt0[1],
r[0][2]*v1x*rady+r[1][2]*v1y*rady+r[2][2]*v1z+pt0[2]])
k = k + 1
ctv = None
ctv = Numeric.concatenate((tv[:, 1], tv[:, 0]))
# now add the data to the big lists
VV.extend(list(ctv))
FF.extend(list(tmpltFaces))
# increase face indices by lenght of vertices
tmpltFaces = tmpltFaces + addToFaces
VV = Numeric.array(VV).astype('f')
FF = Numeric.array(FF).astype('f')
# FIXME: should I compute normals?
# now we can build the IndexedPolygon geom
from DejaVu.IndexedPolygons import IndexedPolygons
cylGeom = IndexedPolygons("cyl",
vertices=VV,
faces=FF,
visible=1,
invertNormals=self.invertNormals)
# copy Cylinders materials into cylGeom
matF = self.materials[GL.GL_FRONT]
matB = self.materials[GL.GL_BACK]
cylGeom.materials[GL.GL_FRONT].binding = matF.binding[:]
cylGeom.materials[GL.GL_FRONT].prop = matF.prop[:]
cylGeom.materials[GL.GL_BACK].binding = matB.binding[:]
cylGeom.materials[GL.GL_BACK].prop = matB.prop[:]
# if binding per vertex:
if cylGeom.materials[GL.GL_FRONT].binding[1] == viewerConst.PER_VERTEX:
newprop = []
props = cylGeom.materials[GL.GL_FRONT].prop[1]
for i in xrange(len(faces)):
for j in xrange(len(faces[i]) - 1):
vi1 = self.faceSet.faces.array[i][j]
vi2 = self.faceSet.faces.array[i][j + 1]
colx = props[vi2]
coly = props[vi1]
# add second color to first half of cyl vertices
for k in range(len(tmpltVertices)):
newprop.append(coly)
# add first color to second half of cyl vertices
for l in range(len(tmpltVertices)):
newprop.append(colx)
cylGeom.materials[GL.GL_FRONT].prop[1] = newprop
# and finally...
#print "Cylinders.asIndexedPolygons out", quality
return cylGeom