def main():
message = input("Enter message: ")
key = int(input("Enter key: "))
remove_spaces = input("Remove spaces <y/n>?: ")
if remove_spaces.upper() == 'Y':
message = ''.join(message.split())
#explanation of reversed_blocks:
#ex. if the length of the message is 10
#and it is encrypted using a key of 2
#then after encryption, every block of 5 letters in the message will be reversed
reversed_blocks = input("Reversed blocks <y/n>?: ")
rb = True if reversed_blocks.upper() == 'Y' else False
mode = input("Mode? <encrypt/decrypt>: ")
if mode.upper() == 'ENCRYPT':
filler = input("Filler = ")
plaintext = encrypt(key, message, filler=filler, reversed_blocks=rb)
elif mode.upper() == 'DECRYPT':
plaintext = decrypt(key, message, reversed_blocks=rb)
else:
plaintext = "ERROR: Invalid mode"
# Print with a | ("pipe" character) after it in case
# there are spaces at the end of the decrypted message.
print(plaintext + '|')
print()
pyperclip.copy(plaintext)
print("<Copied to clipboard>")
print("Warning: do not copy this manually because there is a pipe character at the end of the message that"
" will mess up decryption.")
def main():
message = input("Message: ")
remove_spaces = input("Remove spaces <y/n>?: ")
#inp validation
while not remove_spaces.upper() in 'YN':
remove_spaces = input("Remove spaces <y/n>?: ")
if remove_spaces.upper() == 'Y':
message = ''.join(message.split())
mode = input("Encrypt/decrypt <e/d>: ")
# inp validation
while not mode.upper() in 'ED':
mode = input("Encrypt/decrypt <e/d>: ")
key = int(input("Key = "))
if mode.upper() == 'E':
p = encrypt(message, key)
else:
p = decrypt(message, key)
print(p + '|')
copy(p)
print("<Copied to clipboard>")
print(
"Warning: do not copy this manually because there is a pipe character at the end of the message that"
" will mess up decryption.")
def main():
message = input("Enter a message: ")
remove = input("Remove spaces? [y/n]: ")
if remove == 'y':
message = message.replace(' ', '')
raw_inp = input("Enter key: ")
try:
# if converting it to a tuple doesn't work
key = get_permutation((convert_to_tuple(list(raw_inp))))
except ValueError:
# it must be a string key
key = key_permutation(raw_inp)
#
offset = int(input("Enter offset: "))
mode = input("Mode <encrypt/decrypt>?: ")
if mode.upper() == 'ENCRYPT':
ciphertext = encrypt(message, key, offset)
else:
ciphertext = decrypt(message, key, offset)
# Print w/ a | ("pipe" character) in case there are any spaces
# at the end of the message
print(ciphertext + '|')
print()
pyperclip.copy(ciphertext)
print("<Copied to clipboard>")
print(
"Warning: do not copy this manually because there is a pipe character at the end of the message that"
" will mess up decryption.")
def main():
message = input("Enter a message: ")
remove = input("Remove spaces? [y/n]: ")
if remove == 'y':
message = message.replace(' ', '')
direction = input("Cipher direction <horizontal/vertical>?: ")
#additional input --> n for the n-grams
n = int(input("n = "))
crack = input("Crack code? <y/n>: ")
if crack == 'y':
lower_bound = int(input("Enter lower bound: "))
higher_bound = int(input("Enter higher bound: "))
print()
display_best_decryptions(message=message,
direction=direction,
lowerBound=lower_bound,
higherBound=higher_bound,
num_of_decryptions=10,
n=n)
else:
raw_inp = input("Enter key: ")
try:
#if converting it to a tuple doesn't work
key = get_permutation((convert_to_tuple(list(raw_inp))))
except ValueError:
#it must be a string key
key = key_permutation(raw_inp)
mode = input("Mode <encrypt/decrypt>?: ")
filler = input("Filler = ")
if mode == 'encrypt':
if direction == 'horizontal':
ciphertext = encrypt_horizontal(message, key, n, filler)
else:
ciphertext = encrypt_vertical(message, key, n, filler)
else:
if direction == 'horizontal':
ciphertext = decrypt_horizontal(message, key, n)
else:
ciphertext = decrypt_vertical(message, key, n)
# Print with a | ("pipe" character) after it in case there are spaces at
# the end of the encrypted message.
print(ciphertext + '|')
# Copy the encrypted string in ciphertext to the clipboard.
pyperclip.copy(ciphertext)
print()
print("<Copied to clipboard>")
print(
"Warning: do not copy this manually because there is a pipe character at the end of the message that"
" will mess up decryption.")
def print_best_solutions(scores_list):
print(color.RED + color.BOLD + "10 BEST SOLUTIONS: " + color.END)
print((color.BOLD + "%12s %18s %29s" + color.END) %
("Score:", "Alphabet:", "Message:"))
for i in range(10):
try:
print("%-5d %-15.2f %-30s %-10s" %
(i + 1, scores_list[i][0], ''.join(
scores_list[i][1]), scores_list[i][2]))
except IndexError:
break
pyperclip.copy(scores_list[0][2])
def main():
message = input("Enter message: ")
key = int(input("Enter key: "))
mode = input("Encrypt/Decrypt <e/d>?: ")
if mode.upper() == 'E':
res = encrypt(message, key)
elif mode.upper() == 'D':
res = decrypt(message, key)
# Print with a | ("pipe" character) after it in case
# there are spaces at the end of the decrypted message.
print(res + "|")
pyperclip.copy(res)
print("<Copied to clipboard>")
print(
"Warning: do not copy this manually because there is a pipe character at the end of the message that"
" will mess up decryption.")
def main():
message = input("Enter a message: ")
remove = input("Remove spaces <y/n>?: ")
if remove.upper() == 'Y':
message = ''.join(message.split())
mode = input("Encrypt or decrypt <e/d>?: ")
start_index = int(input("Start index = "))
skip = int(input("Skip = "))
res = encrypt_skip(message, skip,
start_index) if mode.upper() == 'E' else decrypt_skip(
message, skip, start_index)
# Print with a | ("pipe" character) after it in case
# there are spaces at the end of the decrypted message.
print(res + "|")
pyperclip.copy(res)
print("<Copied to clipboard>")
print(
"Warning: do not copy this manually because there is a pipe character at the end of the message that"
" will mess up decryption.")
def main():
c = input("Enter a message: ")
remove_spaces = input("Remove spaces <y/n>?: ")
if remove_spaces.upper() == 'Y':
c = ''.join(c.split())
n = int(input("n = "))
period = int(input("period = "))
mode = input("Encrypt/Decrypt (e/d)?: ")
if mode.upper() == 'E':
res = nfid_encode(c, period, n)
elif mode.upper() == 'D':
res = nfid_decode(c, period, n)
# Print with a | ("pipe" character) after it in case
# there are spaces at the end of the decrypted message.
print(res + "|")
print()
pyperclip.copy(res)
print("<Copied to clipboard>")
print(
"Warning: do not copy this manually because there is a pipe character at the end of the message that"
" will mess up decryption.")
def main(ciphertext: str):
try:
parts = ast.literal_eval(ciphertext)
#extract data from a saved list (if that is the input)
ciphertext, bold_letters, non_bold_letters, replaced_characters = parts[
0], parts[1], parts[2], parts[3]
except (SyntaxError, ValueError):
#otherwise if the input is not a list, assume that input is a normal ciphertext
bold_letters = []
non_bold_letters = get_distinct_ngrams(ciphertext, n=1)
replaced_characters = []
print()
print_with_bolds(ciphertext)
print()
while True:
character = input(
"Enter a character to replace,'/UNDO' to undo a character replacement, '/FREQ' to view frequencies,\
'/RESET' to undo all character replacements, or '/Q' to save & quit: ")
if character == '/Q':
print() #padding
print("Your current message: ", end='')
print_with_bolds(ciphertext)
print() #more padding
save_list = str([
ciphertext, bold_letters, non_bold_letters, replaced_characters
])
print("Enter this next time to resume <copied to clipboard>: " +
save_list)
pyperclip.copy(save_list)
sys.exit(0)
elif character.upper() == '/FREQ':
print()
print_special_frequency_analysis(''.join(ciphertext.split()),
bold_letters, non_bold_letters,
replaced_characters)
print_with_bolds(ciphertext)
print()
continue
elif character.upper() == '/RESET':
print()
ciphertext = reset_message(ciphertext)
bold_letters.clear()
non_bold_letters = get_distinct_ngrams(ciphertext, n=1)
replaced_characters.clear()
print_with_bolds(ciphertext)
print()
continue
elif character in non_bold_letters:
new_character = input("Enter replacement character: ")
#intermediate ciphertext to indicate which letters are bold
ciphertext = special_replace(ciphertext, character,
new_character + BOLD_CHAR + character)
#add an entry to replaced characters
replaced_characters.append((character, new_character))
#character has been bolded now -- remove from non-bolded
non_bold_letters.remove(character)
bold_letters.append(new_character)
print()
print_with_bolds(ciphertext)
print() #one extra line of padding
elif character.upper() == '/UNDO':
character_to_revert = input("Enter bolded character to revert: ")
if character_to_revert in bold_letters:
possible_reverts = [
] #a list of possible bold mappings to revert
for i in range(len(replaced_characters)):
if replaced_characters[i][1] == character_to_revert:
possible_reverts.append(replaced_characters[i][0])
if len(possible_reverts) == 1:
reverted_character = possible_reverts[0]
else:
print(
"The bolded character %s has been used to replace: " %
character_to_revert,
end='')
print(*possible_reverts)
reverted_character = input(
"Which of those characters would you like to see nonbolded? "
)
#input validation
while reverted_character not in possible_reverts:
reverted_character = input(
"Please enter one of the characters listed above: "
)
# finally, do the replacement
ciphertext = ciphertext.replace(
character_to_revert + BOLD_CHAR + reverted_character,
reverted_character)
#update bold & non-bold letters lists
bold_letters.remove(character_to_revert)
non_bold_letters.append(reverted_character)
#delete entry from replaced_characters
replaced_characters.remove(
(reverted_character, character_to_revert))
print() #padding
print_with_bolds(ciphertext)
print() #padding
else:
print(
"Invalid input -- character entered is not among bolded letters"
)
print()
print_with_bolds(ciphertext)
print()
continue
else:
print(
"Invalid input -- character entered is not among nonbolded letters"
)
print()
print_with_bolds(ciphertext)
print()
continue
def main(ciphertext: str):
#check to see if ciphertext is a save list
#if it is a save list, it MOST LIKELY WILL NOT APPEAR EXACTLY THE SAME due to order of operations if the
#key does not go in evenly due to unknown order of operations (did it get inverted first or rows reversed first?)
# declare booleans to use later
inverted = False
reversed_msg = False
reversed_rows = False
columnar = False
try:
parts = ast.literal_eval(ciphertext)
#extract data from a saved list (if that is the input)
ciphertext, key, column_nums = parts[0], parts[1], parts[2]
grid = get_grid(ciphertext, key)
#do the initial printout
print()
print_grid(grid, column_nums)
except (SyntaxError, ValueError):
remove_spaces = input("Remove spaces <y/n>?: ")
# input validation
while not remove_spaces.upper() in 'YN':
remove_spaces = input("Remove spaces <y/n>?: ")
if remove_spaces.upper() == 'Y':
ciphertext = ''.join(ciphertext.split())
ciphertext = ciphertext.upper()
print()
#show probable key lengths and prompt user to enter one
length = len(ciphertext)
print("The length of the message is %d." % length)
print("Probable key lengths are: ", end='')
print(*factors(length), sep=', ')
print()
key = input("Enter grid key: ")
#input validation
while not (key.isnumeric() and 0 < int(key) < len(ciphertext)):
key = input("Please enter a valid grid key: ")
key = int(key) #key str --> int. This is also the # of columns
print() #padding
print("TRANSPOSITION MANUAL DECRYPTION, Key = %d" % key)
print()
grid = get_grid(ciphertext, key)
column_nums = list(range(1, key + 1)) #1-based index, not 0-based
print_grid(grid, column_nums)
while True: #main loop
character = input("""
S) switch two columns
C) change grid type (horizontal/vertical)
T) transpose/revert grid
R) reverse each row
M) reverse the entire message
K) change grid key
Q) save and quit\n""")
#input validation
while not character.upper() in 'SCTRMKQ':
character = input(
"Please enter 'S', 'C', 'T', 'R', 'M', 'K', or 'Q': ")
if character.upper() == 'S':
c_1 = input("Enter 1st column number: ")
#input validation
while not (c_1.isnumeric() and 0 < int(c_1) < key + 1):
c_1 = input("Please enter a valid column number: ")
c_2 = input("Enter 2nd column number: ")
#more input validation
while not (c_2.isnumeric() and 0 < int(c_2) < key + 1):
c_2 = input("Please enter a valid column number: ")
grid, column_nums = switch_columns(grid, int(c_1), int(c_2),
column_nums)
print()
print_grid(grid, column_nums)
elif character.upper() == 'C':
print() # padding
columnar = not columnar
if not columnar: # if horizontal grid
print(color.BOLD + "HORIZONTAL TRANSPOSITION GRID " +
color.END)
else: # otherwise if columnar grid
print(color.BOLD + "COLUMNAR TRANSPOSITION GRID " + color.END)
print()
grid = get_columnar_grid(grid, columnar)
print_grid(grid, column_nums)
elif character.upper() == 'Q':
print() # padding
print("Your message: ", end='')
print(color.RED + color.BOLD + ''.join(grid) + color.END)
print("Encryption Key = " + color.BOLD +
str(tuple(ngramTransposition.invert(column_nums))) +
color.END,
end='')
print() # even more padding
save_list = str([''.join(grid), key, column_nums])
print("Enter this next time to resume <copied to clipboard>: " +
save_list)
pyperclip.copy(save_list)
sys.exit(0)
elif character.upper() == 'T':
print() #padding
inverted = not inverted
if not inverted: #if horizontal view
print("Read off the " + color.BOLD + "ROWS: " + color.END)
else: #otherwise if columns view
print("Read off the " + color.BOLD + "COLUMNS: " + color.END)
print()
grid = invert_grid(grid, inverted)
print_grid(grid, column_nums)
elif character.upper() == 'R':
print() #padding
reversed_rows = not reversed_rows
if not reversed_rows: # if horizontal view
print("Read every row " + color.BOLD + "LEFT TO RIGHT: " +
color.END)
else: # otherwise if columns view
print("Read every row " + color.BOLD + "RIGHT TO LEFT: " +
color.END)
print()
grid = reverse_rows(grid)
column_nums = list(reversed(column_nums))
print_grid(grid, column_nums)
elif character.upper() == 'M':
print() # padding
reversed_msg = not reversed_msg
if not reversed_msg: # if horizontal view
print("Read the message " + color.BOLD + "LEFT TO RIGHT: " +
color.END)
else: # otherwise if columns view
print("Read the message " + color.BOLD + "RIGHT TO LEFT: " +
color.END)
print()
grid = reverse(grid)
print_grid(grid, column_nums)
elif character.upper() == 'K':
print()
are_you_sure = input(
"Are you sure you would like to change the grid key? "
"This will erase all of your current progress <y/n>?: ")
#input validation
while not are_you_sure.upper() in 'YN':
are_you_sure = input("Change grid key <y/n>?: ")
if are_you_sure.upper() == 'N':
print()
continue
else:
print() # padding
#ask for the grid key
length = len(ciphertext)
print(
"Recall the length of the message is %d. Probable key lengths are: "
% length)
print(*factors(length), sep=', ')
print()
key = input("Enter a grid key: ")
#more input validation
while not (key.isnumeric() and 0 < int(key) < len(ciphertext)):
key = input("Please enter a valid grid key: ")
key = int(key)
#reinitalize grid and column_nums
grid = get_grid(ciphertext, key)
column_nums = list(range(1, key + 1, 1))
#print the new initialized grid
print_grid(grid, column_nums)
def main(ciphertext: str):
print()
#check to see if ciphertext is a save list
try:
parts = ast.literal_eval(ciphertext)
#extract data from a saved list (if that is the input)
ciphertext, columns, letter_shifts, view_columns = parts[0], parts[
1], parts[2], parts[3]
key = len(letter_shifts)
#do the initial printout
print_columns_with_bolds(columns, key, letter_shifts) if view_columns else \
print_with_bolds(convert_to_rows_message(ciphertext, columns) + "\n")
except (SyntaxError, ValueError):
#show probable key lengths output
print(probableKeyLengths.print_probable_key_lengths(msg=ciphertext))
key = input(
"Based on the output above, what do you think is the key length?: "
)
#input validation
while not (key.isnumeric() and 0 < int(key) < len(ciphertext)):
key = input("Please enter a valid key length: ")
key = int(key) #key str --> int. This is also the # of columns
print() #padding
print("VIGENERE MANUAL DECRYPTION, L = %d" % key)
columns = re.sub(nonletters, '', ciphertext).upper(
) #convert to uppercase & remove spaces for columns view
print_columns_with_bolds(columns, key)
# boolean to indicate viewing window
view_columns = True
letter_shifts = ['?'] * key
print() # padding
print()
while True: #main loop
character = input("""Enter a column number [1 - %d]
F) view overall frequencies of original message
V) change viewing window
R) reset message
Q) save and quit\n""" % key)
#input validation
while not (character.isnumeric() or character.upper() in 'FVRQ'):
character = input(
"Please enter a valid column number or 'F', 'V', 'R', or 'Q': "
)
if character.isnumeric():
#input validation
while not (0 < int(character) <= key):
try:
character = input("Please enter a valid column number: ")
except TypeError:
continue
n = int(character)
print_columns_with_bolds(columns, key, letter_shifts) if view_columns else \
print_with_bolds("\n" + convert_to_rows_message(ciphertext, columns) + "\n")
while True:
print(color.BOLD + "COLUMN #%d: " % n + color.END, end='')
print_with_bolds(get_nth_column(columns, key, n))
print() #padding
character_2 = input("""F) View frequencies
H) highlight column in original message
S) Shift
R) Revert
B) Go Back\n""")
while not character_2.upper() in 'HFSRB':
character_2 = input(
"Please enter 'F', 'H', 'S', 'R', or 'B': ")
if character_2.upper() == 'H':
print()
print_highlighted_message(ciphertext, columns, key, n)
print()
continue
elif character_2.upper() == 'B': #go back
break
elif character_2.upper() == 'F': #frequencies
print_nth_column_frequencies(columns, key, n)
continue #printing after this will hide the frequency analysis
elif character_2.upper() == 'S': #shift
nth_letter, m_new = shift_nth_column(columns, key, n)
letter_shifts[n - 1] = nth_letter
columns = m_new
else: #revert
columns = revert_nth_column(columns, key, n)
letter_shifts[n - 1] = '?'
#print out the changed columns
print_columns_with_bolds(columns, key, letter_shifts, BOLD_CHAR) if view_columns else \
print_with_bolds("\n" + convert_to_rows_message(ciphertext, columns, BOLD_CHAR) + "\n")
print()
#do this even if user chooses "Go Back" so they don't have to scroll up
print_columns_with_bolds(columns, key, letter_shifts, BOLD_CHAR) if view_columns else \
print_with_bolds("\n" + convert_to_rows_message(ciphertext, columns, BOLD_CHAR))
print()
elif character.upper() == 'Q':
print() # padding
print("Your message: ", end='')
print_with_bolds(
convert_to_rows_message(ciphertext, columns, BOLD_CHAR))
print("Key = " + color.BOLD + ''.join(letter_shifts) + color.END,
end='')
print() # even more padding
save_list = str([ciphertext, columns, letter_shifts, view_columns])
print("Enter this next time to resume <copied to clipboard>: " +
save_list)
pyperclip.copy(save_list)
sys.exit(0)
elif character.upper() == 'V':
print() #padding
view_columns = not view_columns
if not view_columns: #if horizontal view
print("Window changed to " + color.BOLD +
"HORIZONTAL VIEWING WINDOW: " + color.END)
print()
print_with_bolds(
convert_to_rows_message(ciphertext, columns, BOLD_CHAR))
print()
else: #otherwise if columns view
print("Window changed to " + color.BOLD + "COLUMNS VIEW: " +
color.END)
print_columns_with_bolds(columns, key, letter_shifts,
BOLD_CHAR)
elif character.upper() == 'R':
print()
are_you_sure = input(
"Are you sure you would like to reset? This will erase all of your current progress <y/n>?: "
)
#input validation
while not are_you_sure.upper() in 'YN':
are_you_sure = input("Reset <y/n>?: ")
if are_you_sure.upper() == 'N':
print()
continue
else:
#set back to defaults
start_over = input(
"Would you like to start over completely and try with a different key <y/n>?: "
)
#more input validation
while not start_over.upper() in 'YN':
start_over = input("Reset <y/n>?: ")
if start_over.upper() == 'N':
columns = re.sub(nonletters, '', ciphertext).upper()
letter_shifts = ['?'] * key
print_columns_with_bolds(columns, key, letter_shifts, BOLD_CHAR) if view_columns else \
print_with_bolds(convert_to_rows_message(ciphertext, columns, BOLD_CHAR))
continue
else: #starting over completely -- make a recursive call to the main function
main(ciphertext)
elif character.upper() == 'F':
print_special_frequency_analysis(ciphertext, default_input='Y')
print()
continue