def find_ML_Estimator(image, fitParams, outputHandle = None, setParams = None, modelLookup = None, searchMethod = 'simplex', preSearchMethod = None, Prior = None, bruteRange = None, biasCorrect = 0, noiseCalc = None, bcoutputHandle = None, error = 'Fisher', **iParams):
import scipy.optimize as opt
import model_Production as modPro
from surface_Brightness_Profiles import gaussian_SBProfile_Weave
import measure_Bias as mBias
from generalManipulation import makeIterableList
"""
MAIN ROUTINE FOR THIS MODULE. Takes in an image (at minimum) and a set of values which defines the model parameters (fit and those which are free to vary), and returns the parameter values at which the log-Likelihood is minimised (or Likelihood is maximised). Can correct for first order noise bias (if biasCorrect != 0), and an estimate of the error (if error is equal to a set of pre-defined values [see below]).
Requires:
-- image: 2d array of pixelised image
-- fitParams: tuple of strings which define the model parameters which are free to vary (those which will be fit). These must satisfy the definition of model parameters as set out in the default model dictionary. If None, then e1, e2 and T are fit (this could be made stricter by removing the default None initialisation, thereby requiring that a set of parameters to be fit is passed in).
-- outputHandle: handle of the output file. **Result is always appended**. If not passed in, then result is not output. Output is in ASCII form.
-- setParams: Default model dictionary containing fixed parameters which describes the model being fixed. One part of a two part approach to setting the full model parameter dictionary, along with iParams. If None, then default model dictionary is taken.
-- modelLookup: Dictionary containing lookup table for pixelised model images, as defined in model_Production module. If None, no lookup is used, and the model is re-evalauted for each change in model parameters.
-- searchMethod: String detailing which form of minimisation to use. Accepted values are:
___ simplex, brent, powell, cg, bfgs, l_bfgs_b, ncg (as defined in SciPy documentation)
-- preSearchMethod: String detailing initial search over parameter space to find global Minimium, used as an initial guess for refinement with searchMethod. If None, initial guess is set to default passed in by the combination of setParams and iParams. If not None, then code will run an initial, coarse search over the parameter space to attempt to find the global mimima. By default this is switched off. Where preSearchMethod == grid or brute, the a grid based search is used. Where this is used, a range must either be entered by the user through bruteRange, or it is taken from the entered prior information. NOTE: This still uses a typically coarse grid, therefore if the range is too wide then it is possible that the code may still find a local mimimum if this exists within one grid point interval of the global miminum.
-- Prior: NOT USED YET. Skeleton to allow for a parameter prior structure to be passed in
-- bruteRange: [nPar, 2] sized tuple setting the range in which the initial preSearchMethod is evaluated, if this is done using a grid or brute method (both equivalent), where nPar is the number of free model parameters being fit. THIS DOES NOT CONSTITUTE A PRIOR, as the refinement may still find an ML value outside this range, however where the global maximum occurs outside this range the returned ML value may be expected to be biased.
-- biasCorrect: integer, states what level of noise bias to correct the estimate to. Only 1st order correction (biasCorrect == 1) is supported. If biasCorrect == 0, the uncorrected estimate (and error if applicable) are output. If biasCorrect > 0, the uncorrected, corrected and error (if applicable) are output. When used, it is important that *the entered model parameter dictionary contains an accurate measure of the pixel noise of appropriate signal--to--noise, as the analytic bias scales according to both*. Noise can be estimate using estimate_Noise() before entry.
-- bcOutputhandle: As outputHandle, except for the bias corrected estimator.
-- error: String detailing error estiamte to output. Supported values are:
___ fisher: Marginalised fisher error for each parameter around the ML point. See docstring for fisher_Error_ML().
___ brute: UNSUPPORTED, however an error defined on the parameter likelihood itself can be derived if the preSearchMethod and bruteRange is defined such that the Likelihood has *compact support*. If not, then this would be inaccurate (underestimated). Therefore coding for this is deferred until the application of a prior is developed, as use of a prior ensures compact support by default.
-- iParams: set of optional arguments which, together with setParams, defines the intial model dictionary. Allows parameter values to be input individually on call, and is particularly useful for setting initial guesses where preSearchMethod == None.
Model Parameter entry: Model Parameters can be entered using two methods
___ setParams: Full Dictionary of initial guess/fixed value for set of parameters. If None, this is set to default set. May not be complete: if not, then model parameters set to default as given in default_ModelParameter_Dictionary()
___iParams: generic input which allows model parameters to be set individually. Keys not set are set to default as given by default_ModelParameter_Dictionary(). Where an iParams key is included in the default dictionary, or setParams, it will be updated to this value (**therefore iParams values have preferrence**). If key not present in default is entered, it is ignored
___ The initial choice of model parameters (including intial guesses for the minimisation routine where preSearchMethod == False) is thus set as setParams+{iParams}
Returns:
Returned: tuple of length equal to fitParams. Gives ML estimator for each fit parameter, with bias corrected version (if biasCorrect != 0) and error (if applicable) aslways in that order.
"""
''' Set up defaults '''
err = None
##Initialise output tuple
Returned = []
## Exceptions based on input objects
if(image is None or sum(image.shape) == 0):
raise RuntimeError('find_ML_Estimator - image supplied is None or uninitialised')
if(len(fitParams) > 2 and modelLookup is not None and modelLookup['useLookup']):
raise RuntimeError('find_ML_Estimator - Model Lookup is not supported for more than double parameter fits')
##Set up initial params, which sets the intial guess or fixed value for the parameters which defines the model
##This line sets up the keywords that are accepted by the routine
## pixle_Scale and size should be in arsec/pixel and arcsec respectively. If pixel_scale = 1., then size can be interpreted as size in pixels
## centroid should be set to the center of the image, here assumed to be the middle pixel
if(setParams is None):
initialParams = modPro.default_ModelParameter_Dictionary()
else:
initialParams = modPro.default_ModelParameter_Dictionary()
modPro.update_Dictionary(initialParams, setParams)
## Deprecated initialParams.update(setParams)
modPro.set_modelParameter(initialParams, iParams.keys(), iParams.values())
## Define modelParams
modelParams = deepcopy(initialParams)
## Estimate Noise of Image
if(calcNoise is not None):
modelParams['noise'] = calcNoise(image, modelParams['centroid'])
####### Search lnL for minimum
#Construct initial guess for free parameters by removing them from dictionary
x0 = modPro.unpack_Dictionary(modelParams, requested_keys = fitParams)
if(preSearchMethod is not None):
## Conduct a presearch of the parameter space to set initial guess (usually grid-based or brute-force)
if(vverbose or debug):
print '\n Conducting a pre-search of parameter space to idenitfy global minima'
if(preSearchMethod.lower() == 'grid' or preSearchMethod.lower() == 'brute'):
##Brute force method over a range either set as the prior, or the input range.
if(bruteRange is not None):
if(vverbose or debug):
print '\n Using user-defined parameter range:', bruteRange
#x0, fval, bruteGrid, bruteVal
bruteOut = opt.brute(get_logLikelihood, ranges = bruteRange, args = (fitParams, image, modelParams, modelLookup, 'sum'), finish = None, full_output = True)
x0, fval, bruteGrid, bruteVal = bruteOut
## x0 has len(nParam); fval is scalar; bruteGrid has len(nParam), nGrid*nParam; bruteVal has nGrid*nParam
###Evaluate error based on brute by integration - this would only work if bruteRange cover the full range where the PDF is non-zero
if(error.lower() == 'brute'):
raise RuntimeError('find_ML_Estimator - brute labelled as means of evaluating error. This is possbible, but not coded as limitation in use of bruteRange to cover the whole region where the likelihood is non-zero. When a prior is included, this could be taken to be exact, provided one knows the range where the prior has compact support, and the bruteRange reflects this.')
## use scipy.integrate.trapz(bruteVal, x = bruteGrid[i], axis = i) with i looping over all parameters (ensure axis set properly...
if(vverbose or debug):
print '\n preSearch has found a minimum (on a coarse grid) of:', x0
elif(Prior is not None):
if(vverbose or debug):
print '\n Using prior range'
raise RuntimeError('find_ML_Estimator - Prior entry has not yet been coded up')
else:
raise RuntimeError('find_ML_Estimator - Brute preSearch is active, but prior or range is not set')
if(debug or vverbose):
##Output Model Dictionary and initial guess information
print 'Model Dictionary:', modelParams
print '\n Initial Guess:', x0
##Find minimum chi^2 using scipy optimize routines
##version 11+ maxima = opt.minimize(get_logLikelihood, x0, args = (fitParams, image, modelParams))
if(searchMethod.lower() == 'simplex'):
maxima = opt.fmin(get_logLikelihood, x0 = x0, xtol = 0.00001, args = (fitParams, image, modelParams, modelLookup, 'sum'), disp = (verbose or debug))
elif(searchMethod.lower() == 'brent'):
maxima = opt.fmin_brent(get_logLikelihood, x0 = x0, xtol = 0.00001, args = (fitParams, image, modelParams, modelLookup, 'sum'), disp = (verbose or debug))
elif(searchMethod.lower() == 'powell'):
maxima = opt.fmin_powell(get_logLikelihood, x0 = x0, xtol = 0.00001, args = (fitParams, image, modelParams, modelLookup, 'sum'), disp = (verbose or debug))
elif(searchMethod.lower() == 'cg'):
##Not tested (10Aug)
maxima = opt.fmin_cg(get_logLikelihood, x0 = x0, fprime = differentiate_logLikelihood_Gaussian_Analytic, args = (fitParams, image, modelParams, modelLookup, 'sum'), disp = (verbose or debug), ftol = 0.000001)
elif(searchMethod.lower() == 'bfgs'):
##Not tested (10Aug)
maxima = opt.fmin_bfgs(get_logLikelihood, x0 = x0, fprime = differentiate_logLikelihood_Gaussian_Analytic, args = (fitParams, image, modelParams, modelLookup, 'sum'), disp = (verbose or debug))
elif(searchMethod.lower() == 'l_bfgs_b'):
##Not tested (10Aug)
maxima = opt.fmin_l_bfgs_b(get_logLikelihood, x0 = x0, fprime = differentiate_logLikelihood_Gaussian_Analytic, args = (fitParams, image, modelParams, modelLookup, 'sum'), disp = (verbose or debug))
elif(searchMethod.lower() == 'ncg'):
##Not tested (10Aug)
maxima = opt.fmin_ncg(get_logLikelihood, x0 = x0, fprime = differentiate_logLikelihood_Gaussian_Analytic, args = (fitParams, image, modelParams, modelLookup, 'sum'), disp = (verbose or debug))
else:
raise ValueError('find_ML_Estimator - searchMethod entered is not supported:'+str(searchMethod))
##Make numpy array (in the case where 1D is used and scalar is returned):
if(len(fitParams)==1):
maxima = np.array(makeIterableList(maxima))
if(vverbose):
print 'maxima is:', maxima
if(debug):
##Plot and output residual
print 'Plotting residual..'
fittedParams = deepcopy(modelParams)
modPro.set_modelParameter(fittedParams, fitParams, maxima)
''' Deprecated
for i in range(len(fitParams)):
fittedParams[fitParams[i]] = maxima[i]
'''
model, disc = modPro.user_get_Pixelised_Model(fittedParams, sbProfileFunc = gaussian_SBProfile_Weave)
residual = image-model
import pylab as pl
##Plot image and model
f = pl.figure()
ax = f.add_subplot(211)
ax.set_title('Model')
im = ax.imshow(model, interpolation = 'nearest')
pl.colorbar(im)
ax = f.add_subplot(212)
ax.set_title('Image')
im = ax.imshow(image, interpolation = 'nearest')
pl.colorbar(im)
pl.show()
##Plot Residual
f = pl.figure()
ax = f.add_subplot(111)
im = ax.imshow(residual, interpolation = 'nearest')
ax.set_title('Image-Model')
pl.colorbar(im)
pl.show()
if(np.isnan(maxima).sum() > 0):
raise ValueError('get_ML_estimator - FATAL - NaNs found in maxima:', maxima)
if(verbose):
print 'Maxima found to be:', maxima
##Output Result
if(outputHandle is not None):
np.savetxt(outputHandle, np.array(maxima).reshape(1,maxima.shape[0]))
## Bias Correct
if(biasCorrect == 0):
Returned.append(maxima)
elif(biasCorrect == 1):
ana = mBias.analytic_GaussianLikelihood_Bias(maxima, fitParams, modelParams, order = biasCorrect, diffType = 'analytic')
bc_maxima = maxima-ana
##Output Result
if(bcoutputHandle is not None):
np.savetxt(bcoutputHandle, np.array(bc_maxima).reshape(1,bc_maxima.shape[0]))
if(verbose):
print 'BC Maxima found to be:', bc_maxima
##Return minimised parameters
Returned.append(maxima, bc_maxima)
else:
raise ValueError('get_ML_estimator - biasCorrect(ion) value entered is not applicable:'+ str(biasCorrect))
## Get Error on measurement. Brute error would have been constructed on the original brute force grid evaluation above.
if(error.lower() == 'fisher'):
err = fisher_Error_ML(maxima, fitParams, image, setParams, modelLookup) #Use finalised modelParams here?
Returned.append(err)
return Returned
def differentiate_logLikelihood_Gaussian_Analytic(parameters, pLabels, image, setParams, modelLookup = None, returnType = None, order = 1, signModifier = -1.):
import generalManipulation
import model_Production as modPro
from surface_Brightness_Profiles import gaussian_SBProfile_Weave
'''
Returns the analytic derivative of the Gaussian log-Likelihood (ignoring parameter-independent prefactor whose derivative is zero) for parameters labelled by pLabels.
Uses analytic derivative of the pixelised model as given in differentiate_Pixelised_Model_Analytic routine of model_Production routine.
*** Note: `noise` as defined in set params must the noise_std, and must accurately describe the noise properties of the image. ***
Requires:
parameters: flattened array of parameter values to vary (allows for external program to set variation in these params)
pLabels: tuple of length `parameters`, which is used to identify the parameters being varied. These labels should satisfy the modelParameter dictionary keys using in setting up the model
image: 2d <ndarray> of pixelised image
setParams: dictionary of fixed model parameters which sets the model SB profile being fit.
modelLookup: An instance of the model lookup table, as set in model_Production module
returnType: IGNORED, but included so that this method mimic the call fingerprint of the log-Likelihood evaluation routine if used as part of a pre-fab minimisation routine.
order: sets the order to which derivatives are taken. If order == 1, the return is a tuple (ndarray) of length len(parameters), which contains the first derivatives of all parameters. If order == 2, the retrun is a two-dimensional ndarray, where each element i,j gives the sendon derivative wrt parameter i and parameter j. Order >= 3 or <= 0 are not supported.
signModifier: default -1. Result is multiplied by abs(signModifier)/signModifier, to change the sing of the output. This is required as the lnL routine actually returns -lnL = chi^2 where a minimisation routine is used. Thus, where the minimisation uses first derivatives, the signModifier should be postive, whilst for other applications (such as the fisher error) on requires the derivative of lnL, and so sign modifier must be negative. The absolute value of signModifier is unimportant.
Returns:
[dlnL/dbeta], repeated for all beta in order <1D ndarray>: derivative of -1*log_likelihood evaulated at entered model parameters if order == 1
[[dlnL/dbeta_i dbeta_j]], repeated for all beta in order <2D ndarray>: second derivative of -1*log_likelihood evaulated at entered model parameters if order == 1
Possible Extensions:
-- In calculating second order derivatives, a nested loop is used. This is likely to be slow, and as this is used in producing fisher errors (and thus done every run-time), then this cold be a bottle-neck on the measurement of the ML point where errors are used
Tests:
-- Fisher error agrees wel with simulated output for error.
'''
##To be useful as part of a minimisation routine, the arguements passed to this function must be the same as those passed to the ln-Likelihood evalutaion also. This suggest possibly two routines: one, like the model differentiation itself should just return the various derivatives, and a wrapper routine which produces only the relevent derivatives required for mimimisation
## Third order is ignored for now, as this wold require an edit to the methdo of calculating model derivatives, and it is unlikely that a third order derivative would ever really be necessary (excpet in the case where an analytic derivative of the model is wanted for the calculation of the bias, where simulations over many images are used: usually, the known statistics of the Gaussian lileihood can be used to remove this necessity anyway).
### First derivative only are needed, so for now this will be coded only to deal with first derivatives.
### Therefore, n = 1, permute = false by default
### Note, that this code is unlikely to speed up any computation provided that the derivative is calculated using SymPY. Therefore this must be addressed.
### Set up model parameters as input
##Set up dictionary based on model parameters. Shallow copy so changes do not overwrite the original
modelParams = deepcopy(setParams)
if(setParams['stamp_size'] != image.shape):
raise RuntimeError('differentiate_logLikelihood_Gaussian_Analytic - stamp size passed does not match image:', str(setParams['stamp_size']), ':', str( image.shape))
##Check whether parameters input are iterable and assign to a tuple if not: this allows both `parameters' and `pLabels' to be passed as e.g. a float and string and the method to still be used as it
parameters = generalManipulation.makeIterableList(parameters); pLabels = generalManipulation.makeIterableList(pLabels)
if(len(parameters) != len(pLabels)):
raise ValueError('get_logLikelihood - parameters and labels entered do not have the same length (iterable test)')
##Vary parameters which are being varied as input
modPro.set_modelParameter(modelParams, pLabels, parameters)
''' Get Model'''
if(modelLookup is not None and modelLookup['useLookup']):
model = np.array(modPro.return_Model_Lookup(modelLookup, parameters)[0]) #First element of this routine is the model image itself
else:
model = modPro.user_get_Pixelised_Model(modelParams, sbProfileFunc = gaussian_SBProfile_Weave)[0]
''' Get model derivatives '''
modDer = modPro.differentiate_Pixelised_Model_Analytic(modelParams, parameters, pLabels, n = 1, permute = False)
#modDer stores only the n'th derivative of all parameters entered, stored as an nP*nPix*nPix array.
if(order == 2):
##Calculate 2nd derivative also
modDer2 = modPro.differentiate_Pixelised_Model_Analytic(modelParams, parameters, pLabels, n = 2, permute = True)
#modDer2 stores the 2nd derivative of all parameters entered, stored as an nP*nP*nPix*nPix array.
##Construct the result to be returned. This is a scalar array, with length equal to nP, and where each element corresponds to the gradient in that parameter direction
nP = len(parameters)
delI = image - model
if(order == 1):
res = np.zeros(nP)
##Create tdI, which stores dI in the same shape as modDer by adding a first dimension
tdelI = np.zeros(modDer.shape); tdelI[:] = delI.copy()
##Alternatively: tdelI = np.repeat(delI.reshape((1,)+delI.shape), modDer.shape[0], axis = 0)
##Set derivative as sum_pix(delI*derI)/sig^2 for all parameters entered
## ReturnTypes other than sum could be implemented by removing the sum pats of this relation, however the implementation of fprime in the minimisation routines requires the return to be a 1D array containing the gradient in each direction.
res = (tdelI*modDer).sum(axis = -1).sum(axis = -1)
res /= (signModifier/abs(signModifier))*modelParams['noise']*modelParams['noise']
elif(order == 2):
res = np.zeros((nP,nP))
##This could and should be sped-up using two single loops rather than a nested loop, or by defining delI and dIm*dIm in the same dimension as modDer2
## Alternate speed-up is to implement with Weave
for i in range(nP):
for j in range(nP):
res[i,j] = (delI*modDer2[i,j] - modDer[i]*modDer[j]).sum(axis = -1).sum(axis = -1)
res /= (signModifier/abs(signModifier))*modelParams['noise']*modelParams['noise']
return res
def get_logLikelihood(parameters, pLabels, image, setParams, modelLookup = None, returnType = 'sum'):
import math, sys
import model_Production as modPro
import surface_Brightness_Profiles as SBPro
import generalManipulation
"""
Returns the (-1.)*log-Likelihood as a Gaussian of lnL propto (I-Im)^2/sigma_n, where Im is image defined by dictionary ``modelParams'', and I is image being analysed, and sigma_n the pixel noise.
Minimisiation routine should be directed to this function.
Requires:
parameters: flattened array of parameter values for free parameters (allows for external program to set variation in these params)
pLabels: string tuple of length `parameters`, which is used to identify the parameters being varied. These labels should satisfy the modelParameter dictionary keys using in setting up the model.
image: 2d <ndarray> of pixelised image.
setParams: dictionary of fixed model parameters which sets the model SB profile being fit.
modelLookup: An instance of the model lookup table, as set in model_Production module. If None, the the pixelised model image is re-evaluated for each change in parameters.
returnType (default sum):
---`sum`: Total log-likelihood, summing over all pixels
---`pix`: log-likelihood evaluated per pixel. Returns ndarray of the same shape as the input image
Returns:
lnL <scalar>: -1*log_likelihood evaulated at entered model parameters
"""
##Set up dictionary based on model parameters. Shallow copy so changes do not overwrite the original
modelParams = deepcopy(setParams)
if(setParams['stamp_size'] != image.shape):
raise RuntimeError('get_logLikelihood - stamp size passed does not match image:', str(setParams['stamp_size']), ':', str( image.shape))
parameters = generalManipulation.makeIterableList(parameters); pLabels = generalManipulation.makeIterableList(pLabels)
if(len(parameters) != len(pLabels)):
raise ValueError('get_logLikelihood - parameters and labels entered do not have the same length (iterable test): parameters:', str(parameters), ' labels:', str(pLabels))
##Vary parameters which are being varied as input
modPro.set_modelParameter(modelParams, pLabels, parameters)
''' Deprecated for above
for l in range(len(pLabels)):
if(pLabels[l] not in modelParams):
raw_input('Error setting model parameters in get_logLikelihood: Parameter not recognised. <Enter> to continue')
else:
modelParams[pLabels[l]] = parameters[l]
'''
#Test reasonable model values - Effectively applying a hard prior
if(math.sqrt(modelParams['SB']['e1']**2. + modelParams['SB']['e2']**2.) >= 0.99):
##Set log-probability to be as small as possible
return sys.float_info.max/10 #factor of 10 to avoid any chance of memory issues here
#raise ValueError('get_logLikelihood - Invalid Ellipticty values set')
if(modelParams['SB']['size'] <= 0.):
return sys.float_info.max/10
''' Get Model'''
if(modelLookup is not None and modelLookup['useLookup']):
model = np.array(modPro.return_Model_Lookup(modelLookup, parameters)[0]) #First element of this routine is the model image itself
else:
model, disc = modPro.user_get_Pixelised_Model(modelParams, sbProfileFunc = SBPro.gaussian_SBProfile_Weave)
''' Model, lookup comparison '''
'''
modelEx, disc = modPro.user_get_Pixelised_Model(modelParams, sbProfileFunc = modPro.gaussian_SBProfile)
print 'Model, lookup Comparison:', (model-modelEx).sum(), parameters
import pylab as pl
f = pl.figure()
ax = f.add_subplot(211)
im = ax.imshow(modelEx-model); ax.set_title('model - lookup'); pl.colorbar(im)
ax = f.add_subplot(212)
im = ax.imshow(modelEx/model); ax.set_title('model/lookup'); pl.colorbar(im)
pl.show()
'''
if(model.shape != image.shape):
raise ValueError('get_logLikelihood - model returned is not of the same shape as the input image.')
#Construct log-Likelihood assuming Gaussian noise. As this will be minimised, remove the -1 preceeding
if(vverbose):
print 'Noise in ln-Like evaluation:', modelParams['noise']
pixlnL = (np.power(image-model,2.))
lnL = pixlnL.sum()
pixlnL *= 0.5/(modelParams['noise']**2.); lnL *= 0.5/(modelParams['noise']**2.)
if(vverbose):
print 'lnL:', lnL, [ str(pLabels[i])+':'+str(parameters[i]) for i in range(len(pLabels))]
##Model is noise free, so the noise must be seperately measured and passed in
## Answer is independent of noise provided invariant across image
#lnL2 = 0.5*( (np.power(image-model,2.)).sum()/(modelParams['noise']**2.))
if(returnType.lower() == 'sum'):
return lnL
elif(returnType.lower() == 'pix'):
return pixlnL
elif(returnType.lower() == 'all'):
return [lnL, pixlnL]
def differentiate_logLikelihood_Gaussian_Analytic(parameters,
pLabels,
image,
setParams,
modelLookup=None,
returnType=None,
order=1,
signModifier=-1.):
import generalManipulation
import model_Production as modPro
from surface_Brightness_Profiles import gaussian_SBProfile_CXX
'''
Returns the analytic derivative of the Gaussian log-Likelihood (ignoring parameter-independent prefactor whose derivative is zero) for parameters labelled by pLabels.
Uses analytic derivative of the pixelised model as given in differentiate_Pixelised_Model_Analytic routine of model_Production routine.
*** Note: `noise` as defined in set params must the noise_std, and must accurately describe the noise properties of the image. ***
Requires:
parameters: flattened array of parameter values to vary (allows for external program to set variation in these params)
pLabels: tuple of length `parameters`, which is used to identify the parameters being varied. These labels should satisfy the modelParameter dictionary keys using in setting up the model
image: 2d <ndarray> of pixelised image
setParams: dictionary of fixed model parameters which sets the model SB profile being fit.
modelLookup: An instance of the model lookup table, as set in model_Production module
returnType: IGNORED, but included so that this method mimic the call fingerprint of the log-Likelihood evaluation routine if used as part of a pre-fab minimisation routine.
order: sets the order to which derivatives are taken. If order == 1, the return is a tuple (ndarray) of length len(parameters), which contains the first derivatives of all parameters. If order == 2, the retrun is a two-dimensional ndarray, where each element i,j gives the sendon derivative wrt parameter i and parameter j. Order >= 3 or <= 0 are not supported.
signModifier: default -1. Result is multiplied by abs(signModifier)/signModifier, to change the sing of the output. This is required as the lnL routine actually returns -lnL = chi^2 where a minimisation routine is used. Thus, where the minimisation uses first derivatives, the signModifier should be postive, whilst for other applications (such as the fisher error) on requires the derivative of lnL, and so sign modifier must be negative. The absolute value of signModifier is unimportant.
Returns:
[dlnL/dbeta], repeated for all beta in order <1D ndarray>: derivative of -1*log_likelihood evaulated at entered model parameters if order == 1
[[dlnL/dbeta_i dbeta_j]], repeated for all beta in order <2D ndarray>: second derivative of -1*log_likelihood evaulated at entered model parameters if order == 1
Possible Extensions:
-- In calculating second order derivatives, a nested loop is used. This is likely to be slow, and as this is used in producing fisher errors (and thus done every run-time), then this cold be a bottle-neck on the measurement of the ML point where errors are used
Tests:
-- Fisher error agrees wel with simulated output for error.
'''
#raise ValueError("differentiate_logLikelihood_Gaussian_Analytic: This has been disabled as Weave is not behaving. Further modifications require that model, and derivatives are flattened to mimic that requirement that image is also flattened, and an extension to multiple images (this should occur naturally if model and derivatives are repeated to mimic multiple images")
#if(len(image.shape) > 1):
# raise ValueError("differentiate_logLikelihood_Gaussian_Analytic: This routine has not been extended to multiple realisations yet")
##To be useful as part of a minimisation routine, the arguements passed to this function must be the same as those passed to the ln-Likelihood evalutaion also. This suggest possibly two routines: one, like the model differentiation itself should just return the various derivatives, and a wrapper routine which produces only the relevent derivatives required for mimimisation
## Third order is ignored for now, as this wold require an edit to the methdo of calculating model derivatives, and it is unlikely that a third order derivative would ever really be necessary (excpet in the case where an analytic derivative of the model is wanted for the calculation of the bias, where simulations over many images are used: usually, the known statistics of the Gaussian lileihood can be used to remove this necessity anyway).
### First derivative only are needed, so for now this will be coded only to deal with first derivatives.
### Therefore, n = 1, permute = false by default
### Set up model parameters as input
##Set up dictionary based on model parameters. Shallow copy so changes do not overwrite the original
modelParams = deepcopy(setParams)
##Check whether parameters input are iterable and assign to a tuple if not: this allows both `parameters' and `pLabels' to be passed as e.g. a float and string and the method to still be used as it
parameters = generalManipulation.makeIterableList(parameters)
pLabels = generalManipulation.makeIterableList(pLabels)
if (len(parameters) != len(pLabels)):
raise ValueError(
'get_logLikelihood - parameters and labels entered do not have the same length (iterable test)'
)
##Vary parameters which are being varied as input
modPro.set_modelParameter(modelParams, pLabels, parameters)
''' Get Model'''
if (modelLookup is not None and modelLookup['useLookup']):
model = np.array(
modPro.return_Model_Lookup(modelLookup, parameters)
[0]) #First element of this routine is the model image itself
else:
model = modPro.user_get_Pixelised_Model(
modelParams, sbProfileFunc=gaussian_SBProfile_CXX)[0]
''' Get model derivatives '''
modDer = modPro.differentiate_Pixelised_Model_Analytic(modelParams,
parameters,
pLabels,
n=1,
permute=False)
#modDer stores only the n'th derivative of all parameters entered, stored as an nP*nPix*nPix array.
''' Testing flattening
print "modDer shape:", modDer.shape()
#Flatten modDer to mimic flattened image
modDer = [modDer[i].flatten() for i in range(nP)]
print "modDer shape:", modDer.shape()
raw_input()
'''
modDer2 = None
if (order == 2):
##Calculate 2nd derivative also
modDer2 = modPro.differentiate_Pixelised_Model_Analytic(modelParams,
parameters,
pLabels,
n=2,
permute=True)
#modDer2 stores the 2nd derivative of all parameters entered, stored as an nP*nP*nPix*nPix array.
#Flatten and reshape model and derivative model images to reflect the form of the input image (which can by multi-realisations)
model = model.flatten()
modDer = modDer.reshape((modDer.shape[0], -1))
if (modDer2 is not None):
modDer2 = modDer2.reshape((modDer2.shape[0], modDer2.shape[1], -1))
if (len(image.shape) == 2):
## Repeat each nReal times
nRepeat = image.shape[0]
model = np.tile(model, (nRepeat, 1))
modDer = np.array(
[np.tile(modDer[i], (nRepeat, 1)) for i in range(modDer.shape[0])])
#There's most likely a better way to do this (i.e. quicker)
modDer2 = np.array([[
np.tile(modDer2[i, j], (nRepeat, 1))
for j in range(modDer2.shape[1])
] for i in range(modDer2.shape[0])])
# print "Shape check:"
# print "Image:", image.shape
# print "Model:", model.shape
# print "Derivative:", modDer.shape
# if(modDer2 is not None):
# print "2nd Derivative: ", modDer2.shape
# raw_input("Check")
##Construct the result to be returned. This is a scalar array, with length equal to nP, and where each element corresponds to the gradient in that parameter direction
nP = len(parameters)
delI = image - model
if (order == 1):
res = np.zeros(nP)
##Create tdI, which stores dI in the same shape as modDer by adding a first dimension
tdelI = np.zeros(modDer.shape)
tdelI[:] = delI.copy()
##Alternatively: tdelI = np.repeat(delI.reshape((1,)+delI.shape), modDer.shape[0], axis = 0)
##Set derivative as sum_pix(delI*derI)/sig^2 for all parameters entered
## ReturnTypes other than sum could be implemented by removing the sum pats of this relation, however the implementation of fprime in the minimisation routines requires the return to be a 1D array containing the gradient in each direction.
res = (tdelI * modDer).sum(axis=-1).sum(axis=-1)
elif (order == 2):
res = np.zeros((nP, nP))
##This could and should be sped-up using two single loops rather than a nested loop, or by defining delI and dIm*dIm in the same dimension as modDer2
## Alternate speed-up is to implement with CXX
for i in range(nP):
for j in range(nP):
res[i, j] = (delI * modDer2[i, j] -
modDer[i] * modDer[j]).sum(axis=-1).sum(axis=-1)
res /= (signModifier /
abs(signModifier)) * modelParams['noise'] * modelParams['noise']
return res
def get_logLikelihood(parameters,
pLabels,
image,
setParams,
modelLookup=None,
returnType='sum',
signModifier=1,
callCount=0):
import math, sys
import model_Production as modPro
import surface_Brightness_Profiles as SBPro
import generalManipulation
"""
Returns the (-1.)*log-Likelihood as a Gaussian of lnL propto (I-Im)^2/sigma_n, where Im is image defined by dictionary ``modelParams'', and I is image being analysed, and sigma_n the pixel noise.
Minimisiation routine should be directed to this function.
Requires:
parameters: flattened array of parameter values for free parameters (allows for external program to set variation in these params)
pLabels: string tuple of length `parameters`, which is used to identify the parameters being varied. These labels should satisfy the modelParameter dictionary keys using in setting up the model.
image: 2d <ndarray> of pixelised image.
setParams: dictionary of fixed model parameters which sets the model SB profile being fit.
modelLookup: An instance of the model lookup table, as set in model_Production module. If None, the the pixelised model image is re-evaluated for each change in parameters.
returnType (default sum):
---`sum`: Total log-likelihood, summing over all pixels
---`pix`: log-likelihood evaluated per pixel. Returns ndarray of the same shape as the input image
Returns:
lnL <scalar>: -1*log_likelihood evaulated at entered model parameters
"""
callCount += 1
##Set up dictionary based on model parameters. Shallow copy so changes do not overwrite the original
modelParams = deepcopy(setParams)
if ((setParams['stamp_size'] - np.array(image.shape)).sum() > 0):
raise RuntimeError(
'get_logLikelihood - stamp size passed does not match image:',
str(setParams['stamp_size']), ':', str(image.shape))
parameters = generalManipulation.makeIterableList(parameters)
pLabels = generalManipulation.makeIterableList(pLabels)
if (len(parameters) != len(pLabels)):
raise ValueError(
'get_logLikelihood - parameters and labels entered do not have the same length (iterable test): parameters:',
str(parameters), ' labels:', str(pLabels))
##Vary parameters which are being varied as input
modPro.set_modelParameter(modelParams, pLabels, parameters)
''' Deprecated for above
for l in range(len(pLabels)):
if(pLabels[l] not in modelParams):
raw_input('Error setting model parameters in get_logLikelihood: Parameter not recognised. <Enter> to continue')
else:
modelParams[pLabels[l]] = parameters[l]
'''
#Test reasonable model values - Effectively applying a hard prior
if (math.sqrt(modelParams['SB']['e1']**2. + modelParams['SB']['e2']**2.) >=
0.99):
##Set log-probability to be as small as possible
return sys.float_info.max / 10 #factor of 10 to avoid any chance of memory issues here
#raise ValueError('get_logLikelihood - Invalid Ellipticty values set')
if (modelParams['SB']['size'] <= 0.):
return sys.float_info.max / 10
''' Get Model'''
if (modelLookup is not None and modelLookup['useLookup']):
model = np.array(
modPro.return_Model_Lookup(modelLookup, parameters)
[0]) #First element of this routine is the model image itself
else:
model, disc = modPro.user_get_Pixelised_Model(
modelParams, sbProfileFunc=SBPro.gaussian_SBProfile_CXX)
''' Model, lookup comparison '''
'''
modelEx, disc = modPro.user_get_Pixelised_Model(modelParams, sbProfileFunc = modPro.gaussian_SBProfile)
print 'Model, lookup Comparison:', (model-modelEx).sum(), parameters
import pylab as pl
f = pl.figure()
ax = f.add_subplot(211)
im = ax.imshow(modelEx-model); ax.set_title('model - lookup'); pl.colorbar(im)
ax = f.add_subplot(212)
im = ax.imshow(modelEx/model); ax.set_title('model/lookup'); pl.colorbar(im)
pl.show()
'''
""" DEPRECATED for multiple models
if(model.shape != image.shape):
print "\n\n Model shape: ", model.shape, " :: Image Shape:", image.shape
raise ValueError('get_logLikelihood - model returned is not of the same shape as the input image.')
"""
#Flatten model
model = model.flatten()
#Construct log-Likelihood assuming Gaussian noise. As this will be minimised, remove the -1 preceeding
if (vverbose):
print 'Noise in ln-Like evaluation:', modelParams['noise']
keepPix = returnType.lower() == 'pix' or returnType.lower() == 'all'
pixlnL = np.array([])
lnL = 0
absSign = signModifier / abs(signModifier)
if (len(image.shape) == len(model.shape) + 1):
#print "Considering sum over images", pLabels, parameters
for i in range(image.shape[0]):
tpixlnL = absSign * np.power(image[i] - model, 2.)
lnL += tpixlnL.sum()
if (keepPix):
pixlnL = np.append(pixlnL, tpixlnL)
else:
tpixlnL = absSign * np.power(image - model, 2.)
lnL += tpixlnL.sum()
if (keepPix):
pixlnL = np.append(pixlnL, tpixlnL)
pixlnL *= 0.5 / (modelParams['noise']**2.)
lnL *= 0.5 / (modelParams['noise']**2.)
if (vverbose):
print 'lnL:', lnL, [
str(pLabels[i]) + ':' + str(parameters[i])
for i in range(len(pLabels))
]
##Model is noise free, so the noise must be seperately measured and passed in
## Answer is independent of noise provided invariant across image
#lnL2 = 0.5*( (np.power(image-model,2.)).sum()/(modelParams['noise']**2.))
if (returnType.lower() == 'sum'):
return lnL
elif (returnType.lower() == 'pix'):
return pixlnL
elif (returnType.lower() == 'all'):
return [lnL, pixlnL]
def find_ML_Estimator(image,
fitParams,
outputHandle=None,
setParams=None,
modelLookup=None,
searchMethod='simplex',
preSearchMethod=None,
Prior=None,
bruteRange=None,
biasCorrect=0,
calcNoise=None,
bcoutputHandle=None,
error='Fisher',
**iParams):
import scipy.optimize as opt
import model_Production as modPro
from surface_Brightness_Profiles import gaussian_SBProfile_CXX
import measure_Bias as mBias
from generalManipulation import makeIterableList
"""
MAIN ROUTINE FOR THIS MODULE. Takes in an image (at minimum) and a set of values which defines the model parameters (fit and those which are free to vary), and returns the parameter values at which the log-Likelihood is minimised (or Likelihood is maximised). Can correct for first order noise bias (if biasCorrect != 0), and an estimate of the error (if error is equal to a set of pre-defined values [see below]).
Requires:
-- image: 2d array of pixelised image
-- fitParams: tuple of strings which define the model parameters which are free to vary (those which will be fit). These must satisfy the definition of model parameters as set out in the default model dictionary. If None, then e1, e2 and T are fit (this could be made stricter by removing the default None initialisation, thereby requiring that a set of parameters to be fit is passed in).
-- outputHandle: handle of the output file. **Result is always appended**. If not passed in, then result is not output. Output is in ASCII form.
-- setParams: Default model dictionary containing fixed parameters which describes the model being fixed. One part of a two part approach to setting the full model parameter dictionary, along with iParams. If None, then default model dictionary is taken.
-- modelLookup: Dictionary containing lookup table for pixelised model images, as defined in model_Production module. If None, no lookup is used, and the model is re-evalauted for each change in model parameters.
-- searchMethod: String detailing which form of minimisation to use. Accepted values are:
___ simplex, brent, powell, cg, bfgs, l_bfgs_b, ncg (as defined in SciPy documentation)
-- preSearchMethod: String detailing initial search over parameter space to find global Minimium, used as an initial guess for refinement with searchMethod. If None, initial guess is set to default passed in by the combination of setParams and iParams. If not None, then code will run an initial, coarse search over the parameter space to attempt to find the global mimima. By default this is switched off. Where preSearchMethod == grid or brute, the a grid based search is used. Where this is used, a range must either be entered by the user through bruteRange, or it is taken from the entered prior information. NOTE: This still uses a typically coarse grid, therefore if the range is too wide then it is possible that the code may still find a local mimimum if this exists within one grid point interval of the global miminum.
-- Prior: NOT USED YET. Skeleton to allow for a parameter prior structure to be passed in
-- bruteRange: [nPar, 2] sized tuple setting the range in which the initial preSearchMethod is evaluated, if this is done using a grid or brute method (both equivalent), where nPar is the number of free model parameters being fit. THIS DOES NOT CONSTITUTE A PRIOR, as the refinement may still find an ML value outside this range, however where the global maximum occurs outside this range the returned ML value may be expected to be biased.
-- biasCorrect: integer, states what level of noise bias to correct the estimate to. Only 1st order correction (biasCorrect == 1) is supported. If biasCorrect == 0, the uncorrected estimate (and error if applicable) are output. If biasCorrect > 0, the uncorrected, corrected and error (if applicable) are output. When used, it is important that *the entered model parameter dictionary contains an accurate measure of the pixel noise of appropriate signal--to--noise, as the analytic bias scales according to both*. Noise can be estimate using estimate_Noise() before entry.
-- bcOutputhandle: As outputHandle, except for the bias corrected estimator.
-- error: String detailing error estiamte to output. Supported values are:
___ fisher: Marginalised fisher error for each parameter around the ML point. See docstring for fisher_Error_ML().
___ brute: UNSUPPORTED, however an error defined on the parameter likelihood itself can be derived if the preSearchMethod and bruteRange is defined such that the Likelihood has *compact support*. If not, then this would be inaccurate (underestimated). Therefore coding for this is deferred until the application of a prior is developed, as use of a prior ensures compact support by default.
-- iParams: set of optional arguments which, together with setParams, defines the intial model dictionary. Allows parameter values to be input individually on call, and is particularly useful for setting initial guesses where preSearchMethod == None.
Model Parameter entry: Model Parameters can be entered using two methods
___ setParams: Full Dictionary of initial guess/fixed value for set of parameters. If None, this is set to default set. May not be complete: if not, then model parameters set to default as given in default_ModelParameter_Dictionary()
___iParams: generic input which allows model parameters to be set individually. Keys not set are set to default as given by default_ModelParameter_Dictionary(). Where an iParams key is included in the default dictionary, or setParams, it will be updated to this value (**therefore iParams values have preferrence**). If key not present in default is entered, it is ignored
___ The initial choice of model parameters (including intial guesses for the minimisation routine where preSearchMethod == False) is thus set as setParams+{iParams}
Returns:
Returned: tuple of length equal to fitParams. Gives ML estimator for each fit parameter, with bias corrected version (if biasCorrect != 0) and error (if applicable) aslways in that order.
"""
''' Set up defaults '''
##Initialise result variables
Returned = []
err = None
## Exceptions based on input objects
if (image is None or sum(image.shape) == 0):
raise RuntimeError(
'find_ML_Estimator - image supplied is None or uninitialised')
if (len(fitParams) > 2 and modelLookup is not None
and modelLookup['useLookup']):
raise RuntimeError(
'find_ML_Estimator - Model Lookup is not supported for more than double parameter fits'
)
##Set up initial params, which sets the intial guess or fixed value for the parameters which defines the model
##This line sets up the keywords that are accepted by the routine
## pixle_Scale and size should be in arsec/pixel and arcsec respectively. If pixel_scale = 1., then size can be interpreted as size in pixels
## centroid should be set to the center of the image, here assumed to be the middle pixel
if (setParams is None):
print "Setting parameters to default"
initialParams = modPro.default_ModelParameter_Dictionary()
else:
print "Updating initial parameters with set Params"
initialParams = modPro.default_ModelParameter_Dictionary()
modPro.update_Dictionary(initialParams, setParams)
## Deprecated initialParams.update(setParams)
modPro.set_modelParameter(initialParams, iParams.keys(), iParams.values())
## Define modelParams
modelParams = deepcopy(initialParams)
## Estimate Noise of Image
if (calcNoise is not None):
#Assumes each image is flattened and therefore needs to be reshaped.
if (len(image.shape) == 2):
if (image.shape[0] < 2):
#Use only the first image
tImage = image[0].reshape(modelParams['stamp_size'])
maskCentroid = modelParams['centroid']
else:
#Use an alternate stack of closest to even (assumes that pixel error is roughly symmetric), (the alternative stack should negate any feature and background, the effect on the noise is uncertain). Can only be used on multiple realisations of the same field
if (image.shape[0] % 2 == 0):
finalIndex = image.shape[0]
else:
finalIndex = image.shape[0] - 1
print "Final Index check (should be even): ", finalIndex
aStackImage = np.zeros(image[0].shape)
for i in range(finalIndex):
aStackImage += image[i] #*np.power(-1, i)
print "\nEstimating noise from stack-subtracted image"
aStackImage /= float(finalIndex)
tImage = (image[0] - aStackImage).reshape(
modelParams['stamp_size'])
#Turn off centroid masking (as feature should be removed), subtract stacked from each realisation, and flatten for noise estimation
maskCentroid = None
aStackImage = np.tile(aStackImage, (image.shape[0], 1))
tImage = (image - aStackImage).flatten()
print "--Done"
#-- Note, this could be improved by removing maskCentroid in this case, thus allowing the flattened array to be used (a larger data vector), and thus reducing the noise on the error estimation
##Plot
# import pylab as pl
# f = pl.figure()
# ax = f.add_subplot(111)
# im = ax.imshow(tImage)
# pl.colorbar(im)
# pl.show()
elif (len(image.shape) == 1):
tImage = image.reshape(modelParams['stamp_size'])
maskCentroid = modelParams['centroid']
else:
raise ValueError(
"find_ML_Estimate: calcNoise: image not of expected shape")
modelParams['noise'] = calcNoise(tImage, maskCentroid)
####### Search lnL for minimum
#Construct initial guess for free parameters by removing them from dictionary
x0 = modPro.unpack_Dictionary(modelParams, requested_keys=fitParams)
###### Sanity check image dimensions compared to model parameters
imDim = len(image.shape)
if (imDim > 2):
raise ValueError(
"find_ML_Estimator: Image must not have more than two dimensions. Single postage stamp image must be flattened"
)
elif (imDim == 1
and image.shape[0] != np.array(modelParams['stamp_size']).prod()):
raise ValueError(
"find_ML_Estimator: Flattened image (1D) length does not correspond to model parameter dimensions"
)
elif (imDim == 2
and image.shape[1] != np.array(modelParams['stamp_size']).prod()):
print 'Image shape: ', image.shape, ' Model shape:', modelParams[
'stamp_size']
raise ValueError(
"find_ML_Estimator: image sahpe of second dimension is not consistent with expected model parameter dimension. 2D image array must contain multiple images across first dimension, and (flattened) pixels as a data vector in the second dimension: Have you remembered to flatten the image?"
)
if (preSearchMethod is not None):
## Conduct a presearch of the parameter space to set initial guess (usually grid-based or brute-force)
if (vverbose or debug):
print '\n Conducting a pre-search of parameter space to idenitfy global minima'
if (preSearchMethod.lower() == 'grid'
or preSearchMethod.lower() == 'brute'):
##Brute force method over a range either set as the prior, or the input range.
if (bruteRange is not None):
if (vverbose or debug):
print '\n Using user-defined parameter range:', bruteRange
print "Using bruteRange: ", bruteRange
#x0, fval, bruteGrid, bruteVal
bruteOut = opt.brute(get_logLikelihood,
ranges=bruteRange,
args=(fitParams, image, modelParams,
modelLookup, 'sum'),
finish=None,
full_output=True)
x0, fval, bruteGrid, bruteVal = bruteOut
## x0 has len(nParam); fval is scalar; bruteGrid has len(nParam), nGrid*nParam; bruteVal has nGrid*nParam
###Evaluate error based on brute by integration - this would only work if bruteRange cover the full range where the PDF is non-zero
if (error is not None and error.lower() == 'brute'):
raise RuntimeError(
'find_ML_Estimator - brute labelled as means of evaluating error. This is possbible, but not coded as limitation in use of bruteRange to cover the whole region where the likelihood is non-zero. When a prior is included, this could be taken to be exact, provided one knows the range where the prior has compact support, and the bruteRange reflects this.'
)
## use scipy.integrate.trapz(bruteVal, x = bruteGrid[i], axis = i) with i looping over all parameters (ensure axis set properly...
##Testing of error determination
# tErr = fisher_Error_ML(x0, fitParams, image, modelParams, modelLookup)
# from scipy.stats import norm
# rv = norm(loc = x0, scale = tErr)
# ##Plot this
# import pylab as pl
# f = pl.figure()
# ax = f.add_subplot(111)
# import math
# ax.plot(bruteGrid, np.exp(-1.*(bruteVal-np.amin(bruteVal))), bruteGrid, (np.sqrt(2*math.pi)*tErr)*rv.pdf(bruteGrid))
# pl.show()
# raw_input("Check")
if (vverbose or debug):
print '\n preSearch has found a minimum (on a coarse grid) of:', x0
elif (Prior is not None):
if (vverbose or debug):
print '\n Using prior range'
raise RuntimeError(
'find_ML_Estimator - Prior entry has not yet been coded up'
)
else:
raise RuntimeError(
'find_ML_Estimator - Brute preSearch is active, but prior or range is not set'
)
if (debug or vverbose):
##Output Model Dictionary and initial guess information
print 'Model Dictionary:', modelParams
print '\n Initial Guess:', x0
##Find minimum chi^2 using scipy optimize routines
##version 11+ maxima = opt.minimize(get_logLikelihood, x0, args = (fitParams, image, modelParams))
if (searchMethod.lower() == 'simplex'):
maxima = opt.fmin(get_logLikelihood,
x0=x0,
xtol=0.00001,
args=(fitParams, image, modelParams, modelLookup,
'sum'),
disp=(verbose or debug))
elif (searchMethod.lower() == "emcee"):
import emcee
if (verbose):
print "\n-Running emcee....."
#Define MCMC parameters. These should be passed in
nWalkers = 6
nRun = 1000
nBurn = 100
if (not isinstance(x0, np.ndarray)):
x0 = np.array(x0)
nDim = x0.shape[0]
print "x0: ", x0
#Produce a new x0 for each parameter. For now, take as -1.5x0 to 1.5x0. Better to pass this in, or inform from prior range
p0 = np.zeros((nWalkers, nDim))
for i in range(x0.shape[0]):
p0[:, i] = np.random.uniform(-1.5 * x0[i], 1.5 * x0[i], nWalkers)
print "P0:", p0
sampler = emcee.EnsembleSampler(nWalkers,
nDim,
get_logLikelihood,
args=(fitParams, image, modelParams,
modelLookup, 'sum', -1))
#Burn-in
if (verbose):
print "-Running burn-in....."
pos, prob, state = sampler.run_mcmc(p0, nBurn)
sampler.reset()
if (verbose):
print "--Finished burn-in."
print " Position is ", pos
print "with prob: ", prob
#Run
if (verbose):
print "-Sampling....."
sampler.run_mcmc(pos, nRun)
if (verbose):
print "--Finished", nRun, " samples."
#Get output
chain = sampler.flatchain
pChain = sampler.flatlnprobability
maxIndex = np.argmax(pChain, axis=0)
maxima = chain[maxIndex, :]
err = np.std(chain, axis=0)
if (debug):
import pylab as pl
f = pl.figure()
for i in range(1, nDim + 1):
ax = f.add_subplot(nDim, 1, i)
ax.hist(chain[:, i - 1], bins=100)
ax.set_title("Par: " + fitParams[i - 1])
pl.show()
elif (searchMethod.lower() == 'brent'):
maxima = opt.fmin_brent(get_logLikelihood,
x0=x0,
xtol=0.00001,
args=(fitParams, image, modelParams,
modelLookup, 'sum'),
disp=(verbose or debug))
elif (searchMethod.lower() == 'powell'):
maxima = opt.fmin_powell(get_logLikelihood,
x0=x0,
xtol=0.00001,
args=(fitParams, image, modelParams,
modelLookup, 'sum'),
disp=(verbose or debug))
elif (searchMethod.lower() == 'cg'):
##Not tested (10Aug)
maxima = opt.fmin_cg(
get_logLikelihood,
x0=x0,
fprime=differentiate_logLikelihood_Gaussian_Analytic,
args=(fitParams, image, modelParams, modelLookup, 'sum'),
disp=(verbose or debug),
ftol=0.000001)
elif (searchMethod.lower() == 'bfgs'):
##Not tested (10Aug)
maxima = opt.fmin_bfgs(
get_logLikelihood,
x0=x0,
fprime=differentiate_logLikelihood_Gaussian_Analytic,
args=(fitParams, image, modelParams, modelLookup, 'sum'),
disp=(verbose or debug))
elif (searchMethod.lower() == 'l_bfgs_b'):
##Not tested (10Aug)
maxima = opt.fmin_l_bfgs_b(
get_logLikelihood,
x0=x0,
fprime=differentiate_logLikelihood_Gaussian_Analytic,
args=(fitParams, image, modelParams, modelLookup, 'sum'),
disp=(verbose or debug))
elif (searchMethod.lower() == 'ncg'):
##Not tested (10Aug)
maxima = opt.fmin_ncg(
get_logLikelihood,
x0=x0,
fprime=differentiate_logLikelihood_Gaussian_Analytic,
args=(fitParams, image, modelParams, modelLookup, 'sum'),
disp=(verbose or debug))
else:
raise ValueError(
'find_ML_Estimator - searchMethod entered is not supported:' +
str(searchMethod))
##Make numpy array (in the case where 1D is used and scalar is returned):
if (len(fitParams) == 1):
maxima = np.array(makeIterableList(maxima))
if (vverbose):
print 'maxima is:', maxima
if (debug):
##Plot and output residual
print 'Plotting residual..'
fittedParams = deepcopy(modelParams)
modPro.set_modelParameter(fittedParams, fitParams, maxima)
''' Deprecated
for i in range(len(fitParams)):
fittedParams[fitParams[i]] = maxima[i]
'''
model, disc = modPro.user_get_Pixelised_Model(
fittedParams, sbProfileFunc=gaussian_SBProfile_CXX)
residual = image
if (len(image.shape) == 2):
residual -= image
elif (len(image.shape) == 3):
for i in range(image.shape[0]):
residual[i] -= image[i]
else:
raise ValueError(
"Error calculating residual: Image has an unknown rank")
import pylab as pl
##Plot image and model
f = pl.figure()
ax = f.add_subplot(211)
ax.set_title('Model')
im = ax.imshow(model, interpolation='nearest')
pl.colorbar(im)
ax = f.add_subplot(212)
ax.set_title('Image')
if (len(image.shape) == 3):
im = ax.imshow(image[0], interpolation='nearest')
else:
im = ax.imshow(image, interpolation='nearest')
pl.colorbar(im)
pl.show()
##Plot Residual
f = pl.figure()
ax = f.add_subplot(111)
im = ax.imshow(residual, interpolation='nearest')
ax.set_title('Image-Model')
pl.colorbar(im)
pl.show()
if (np.isnan(maxima).sum() > 0):
raise ValueError('get_ML_estimator - FATAL - NaNs found in maxima:',
maxima)
if (verbose):
print 'Maxima found to be:', maxima
##Output Result
if (outputHandle is not None):
np.savetxt(outputHandle, np.array(maxima).reshape(1, maxima.shape[0]))
## Bias Correct
if (biasCorrect == 0):
Returned.append(maxima)
elif (biasCorrect == 1):
ana = mBias.analytic_GaussianLikelihood_Bias(maxima,
fitParams,
modelParams,
order=biasCorrect,
diffType='analytic')
bc_maxima = maxima - ana
##Output Result
if (bcoutputHandle is not None):
np.savetxt(bcoutputHandle,
np.array(bc_maxima).reshape(1, bc_maxima.shape[0]))
if (verbose):
print 'BC Maxima found to be:', bc_maxima
##Return minimised parameters
Returned.append(maxima, bc_maxima)
else:
raise ValueError(
'get_ML_estimator - biasCorrect(ion) value entered is not applicable:'
+ str(biasCorrect))
## Get Error on measurement. Brute error would have been constructed on the original brute force grid evaluation above.
if (error is not None):
if (err is not None):
err = err #Do nothing
elif (error.lower() == 'fisher'):
err = fisher_Error_ML(
maxima, fitParams, image, modelParams,
modelLookup) #Use finalised modelParams here?
else:
raise ValueError(
"get_ML_estimator - failed to return error, error requested, but value not found nor acceptable lable used"
)
Returned.append(err)
return Returned
