def main():
signal.signal(signal.SIGTERM, process.exit_handler)
signal.signal(signal.SIGUSR1, pykka.debug.log_thread_tracebacks)
loop = gobject.MainLoop()
options = parse_options()
try:
log.setup_logging(options.verbosity_level, options.save_debug_log)
check_old_folders()
setup_settings(options.interactive)
audio = setup_audio()
backends = setup_backends(audio)
core = setup_core(audio, backends)
setup_frontends(core)
loop.run()
except exceptions.SettingsError as ex:
logger.error(ex.message)
except KeyboardInterrupt:
logger.info('Interrupted. Exiting...')
except Exception as ex:
logger.exception(ex)
finally:
loop.quit()
stop_frontends()
stop_core()
stop_backends()
stop_audio()
process.stop_remaining_actors()
def main():
signal.signal(signal.SIGTERM, process.exit_handler)
signal.signal(signal.SIGUSR1, pykka.debug.log_thread_tracebacks)
args = commands.parser.parse_args(args=mopidy_args)
if args.show_config:
commands.show_config(args)
if args.show_deps:
commands.show_deps()
# TODO: figure out a way to make the boilerplate in this file reusable in
# scanner and other places we need it.
try:
# Initial config without extensions to bootstrap logging.
logging_initialized = False
logging_config, _ = config_lib.load(args.config_files, [],
args.config_overrides)
# TODO: setup_logging needs defaults in-case config values are None
log.setup_logging(logging_config, args.verbosity_level,
args.save_debug_log)
logging_initialized = True
create_file_structures()
check_old_locations()
installed_extensions = ext.load_extensions()
config, config_errors = config_lib.load(args.config_files,
installed_extensions,
args.config_overrides)
# Filter out disabled extensions and remove any config errors for them.
enabled_extensions = []
for extension in installed_extensions:
enabled = config[extension.ext_name]['enabled']
if ext.validate_extension(extension) and enabled:
enabled_extensions.append(extension)
elif extension.ext_name in config_errors:
del config_errors[extension.ext_name]
log_extension_info(installed_extensions, enabled_extensions)
check_config_errors(config_errors)
# Read-only config from here on, please.
proxied_config = config_lib.Proxy(config)
log.setup_log_levels(proxied_config)
ext.register_gstreamer_elements(enabled_extensions)
# Anything that wants to exit after this point must use
# mopidy.utils.process.exit_process as actors have been started.
start(proxied_config, enabled_extensions)
except KeyboardInterrupt:
pass
except Exception as ex:
if logging_initialized:
logger.exception(ex)
raise
def main():
signal.signal(signal.SIGTERM, exit_handler)
loop = gobject.MainLoop()
try:
options = parse_options()
setup_logging(options.verbosity_level, options.save_debug_log)
check_old_folders()
setup_settings(options.interactive)
setup_gstreamer()
setup_mixer()
setup_backend()
setup_frontends()
loop.run()
except SettingsError as e:
logger.error(e.message)
except KeyboardInterrupt:
logger.info(u'Interrupted. Exiting...')
except Exception as e:
logger.exception(e)
finally:
loop.quit()
stop_frontends()
stop_backend()
stop_mixer()
stop_gstreamer()
stop_remaining_actors()
def main():
signal.signal(signal.SIGTERM, exit_handler)
loop = gobject.MainLoop()
try:
options = parse_options()
setup_logging(options.verbosity_level, options.save_debug_log)
check_old_folders()
setup_settings(options.interactive)
setup_gstreamer()
setup_mixer()
setup_backend()
setup_frontends()
loop.run()
except SettingsError as e:
logger.error(e.message)
except KeyboardInterrupt:
logger.info(u'Interrupted. Exiting...')
except Exception as e:
logger.exception(e)
finally:
loop.quit()
stop_frontends()
stop_backend()
stop_mixer()
stop_gstreamer()
stop_remaining_actors()
def main():
signal.signal(signal.SIGTERM, process.exit_handler)
signal.signal(signal.SIGUSR1, pykka.debug.log_thread_tracebacks)
args = commands.parser.parse_args(args=mopidy_args)
if args.show_config:
commands.show_config(args)
if args.show_deps:
commands.show_deps()
# TODO: figure out a way to make the boilerplate in this file reusable in
# scanner and other places we need it.
try:
# Initial config without extensions to bootstrap logging.
logging_initialized = False
logging_config, _ = config_lib.load(
args.config_files, [], args.config_overrides)
# TODO: setup_logging needs defaults in-case config values are None
log.setup_logging(
logging_config, args.verbosity_level, args.save_debug_log)
logging_initialized = True
create_file_structures()
check_old_locations()
installed_extensions = ext.load_extensions()
config, config_errors = config_lib.load(
args.config_files, installed_extensions, args.config_overrides)
# Filter out disabled extensions and remove any config errors for them.
enabled_extensions = []
for extension in installed_extensions:
enabled = config[extension.ext_name]['enabled']
if ext.validate_extension(extension) and enabled:
enabled_extensions.append(extension)
elif extension.ext_name in config_errors:
del config_errors[extension.ext_name]
log_extension_info(installed_extensions, enabled_extensions)
check_config_errors(config_errors)
# Read-only config from here on, please.
proxied_config = config_lib.Proxy(config)
log.setup_log_levels(proxied_config)
ext.register_gstreamer_elements(enabled_extensions)
# Anything that wants to exit after this point must use
# mopidy.utils.process.exit_process as actors have been started.
start(proxied_config, enabled_extensions)
except KeyboardInterrupt:
pass
except Exception as ex:
if logging_initialized:
logger.exception(ex)
raise
def main():
signal.signal(signal.SIGTERM, exit_handler)
try:
options = parse_options()
setup_logging(options.verbosity_level, options.save_debug_log)
setup_settings(options.interactive)
setup_gobject_loop()
setup_gstreamer()
setup_mixer()
setup_backend()
setup_frontends()
while True:
time.sleep(1)
except SettingsError as e:
logger.error(e.message)
except KeyboardInterrupt:
logger.info(u'Interrupted. Exiting...')
except Exception as e:
logger.exception(e)
finally:
stop_all_actors()
def main():
log.bootstrap_delayed_logging()
logger.info('Starting Mopidy %s', versioning.get_version())
signal.signal(signal.SIGTERM, process.exit_handler)
# Windows does not have signal.SIGUSR1
if hasattr(signal, 'SIGUSR1'):
signal.signal(signal.SIGUSR1, pykka.debug.log_thread_tracebacks)
try:
registry = ext.Registry()
root_cmd = commands.RootCommand()
config_cmd = commands.ConfigCommand()
deps_cmd = commands.DepsCommand()
root_cmd.set(extension=None, registry=registry)
root_cmd.add_child('config', config_cmd)
root_cmd.add_child('deps', deps_cmd)
installed_extensions = ext.load_extensions()
for extension in installed_extensions:
ext_cmd = extension.get_command()
if ext_cmd:
ext_cmd.set(extension=extension)
root_cmd.add_child(extension.ext_name, ext_cmd)
args = root_cmd.parse(mopidy_args)
create_file_structures_and_config(args, installed_extensions)
check_old_locations()
config, config_errors = config_lib.load(
args.config_files, installed_extensions, args.config_overrides)
verbosity_level = args.base_verbosity_level
if args.verbosity_level:
verbosity_level += args.verbosity_level
log.setup_logging(config, verbosity_level, args.save_debug_log)
extensions = {
'validate': [], 'config': [], 'disabled': [], 'enabled': []}
for extension in installed_extensions:
if not ext.validate_extension(extension):
config[extension.ext_name] = {'enabled': False}
config_errors[extension.ext_name] = {
'enabled': 'extension disabled by self check.'}
extensions['validate'].append(extension)
elif not config[extension.ext_name]['enabled']:
config[extension.ext_name] = {'enabled': False}
config_errors[extension.ext_name] = {
'enabled': 'extension disabled by user config.'}
extensions['disabled'].append(extension)
elif config_errors.get(extension.ext_name):
config[extension.ext_name]['enabled'] = False
config_errors[extension.ext_name]['enabled'] = (
'extension disabled due to config errors.')
extensions['config'].append(extension)
else:
extensions['enabled'].append(extension)
log_extension_info(installed_extensions, extensions['enabled'])
# Config and deps commands are simply special cased for now.
if args.command == config_cmd:
return args.command.run(
config, config_errors, installed_extensions)
elif args.command == deps_cmd:
return args.command.run()
check_config_errors(config, config_errors, extensions)
if not extensions['enabled']:
logger.error('No extension enabled, exiting...')
sys.exit(1)
# Read-only config from here on, please.
proxied_config = config_lib.Proxy(config)
if args.extension and args.extension not in extensions['enabled']:
logger.error(
'Unable to run command provided by disabled extension %s',
args.extension.ext_name)
return 1
for extension in extensions['enabled']:
extension.setup(registry)
# Anything that wants to exit after this point must use
# mopidy.utils.process.exit_process as actors can have been started.
try:
return args.command.run(args, proxied_config)
except NotImplementedError:
print(root_cmd.format_help())
return 1
except KeyboardInterrupt:
pass
except Exception as ex:
logger.exception(ex)
raise
def setup_logging(self):
setup_logging(self.options.verbosity_level,
self.options.save_debug_log)
logger.info(u'-- Starting Mopidy --')
def main():
signal.signal(signal.SIGTERM, process.exit_handler)
signal.signal(signal.SIGUSR1, pykka.debug.log_thread_tracebacks)
loop = gobject.MainLoop()
options = parse_options()
config_files = options.config.split(b':')
config_overrides = options.overrides
enabled_extensions = [] # Make sure it is defined before the finally block
logging_initialized = False
# TODO: figure out a way to make the boilerplate in this file reusable in
# scanner and other places we need it.
try:
# Initial config without extensions to bootstrap logging.
logging_config, _ = config_lib.load(config_files, [], config_overrides)
# TODO: setup_logging needs defaults in-case config values are None
log.setup_logging(logging_config, options.verbosity_level,
options.save_debug_log)
logging_initialized = True
installed_extensions = ext.load_extensions()
# TODO: wrap config in RO proxy.
config, config_errors = config_lib.load(config_files,
installed_extensions,
config_overrides)
# Filter out disabled extensions and remove any config errors for them.
for extension in installed_extensions:
enabled = config[extension.ext_name]['enabled']
if ext.validate_extension(extension) and enabled:
enabled_extensions.append(extension)
elif extension.ext_name in config_errors:
del config_errors[extension.ext_name]
log_extension_info(installed_extensions, enabled_extensions)
check_config_errors(config_errors)
# Read-only config from here on, please.
proxied_config = config_lib.Proxy(config)
log.setup_log_levels(proxied_config)
create_file_structures()
check_old_locations()
ext.register_gstreamer_elements(enabled_extensions)
# Anything that wants to exit after this point must use
# mopidy.utils.process.exit_process as actors have been started.
audio = setup_audio(proxied_config)
backends = setup_backends(proxied_config, enabled_extensions, audio)
core = setup_core(audio, backends)
setup_frontends(proxied_config, enabled_extensions, core)
loop.run()
except KeyboardInterrupt:
if logging_initialized:
logger.info('Interrupted. Exiting...')
except Exception as ex:
if logging_initialized:
logger.exception(ex)
raise
finally:
loop.quit()
stop_frontends(enabled_extensions)
stop_core()
stop_backends(enabled_extensions)
stop_audio()
process.stop_remaining_actors()
def main():
signal.signal(signal.SIGTERM, process.exit_handler)
signal.signal(signal.SIGUSR1, pykka.debug.log_thread_tracebacks)
loop = gobject.MainLoop()
options = parse_options()
config_files = options.config.split(b':')
config_overrides = options.overrides
enabled_extensions = [] # Make sure it is defined before the finally block
logging_initialized = False
# TODO: figure out a way to make the boilerplate in this file reusable in
# scanner and other places we need it.
try:
# Initial config without extensions to bootstrap logging.
logging_config, _ = config_lib.load(config_files, [], config_overrides)
# TODO: setup_logging needs defaults in-case config values are None
log.setup_logging(
logging_config, options.verbosity_level, options.save_debug_log)
logging_initialized = True
installed_extensions = ext.load_extensions()
# TODO: wrap config in RO proxy.
config, config_errors = config_lib.load(
config_files, installed_extensions, config_overrides)
# Filter out disabled extensions and remove any config errors for them.
for extension in installed_extensions:
enabled = config[extension.ext_name]['enabled']
if ext.validate_extension(extension) and enabled:
enabled_extensions.append(extension)
elif extension.ext_name in config_errors:
del config_errors[extension.ext_name]
log_extension_info(installed_extensions, enabled_extensions)
check_config_errors(config_errors)
# Read-only config from here on, please.
proxied_config = config_lib.Proxy(config)
log.setup_log_levels(proxied_config)
create_file_structures()
check_old_locations()
ext.register_gstreamer_elements(enabled_extensions)
# Anything that wants to exit after this point must use
# mopidy.utils.process.exit_process as actors have been started.
audio = setup_audio(proxied_config)
backends = setup_backends(proxied_config, enabled_extensions, audio)
core = setup_core(audio, backends)
setup_frontends(proxied_config, enabled_extensions, core)
loop.run()
except KeyboardInterrupt:
if logging_initialized:
logger.info('Interrupted. Exiting...')
except Exception as ex:
if logging_initialized:
logger.exception(ex)
raise
finally:
loop.quit()
stop_frontends(enabled_extensions)
stop_core()
stop_backends(enabled_extensions)
stop_audio()
process.stop_remaining_actors()