Ejemplos de setDecelerationTime en Python

Ejemplo n.º 1

Archivo: motorTest3.py Proyecto: VinceVia/FYDP

basetime = time.time()
motorFunctions.connectVFD()

print("Starting Test 3: Short Skid Tests")
print("Test 3 - Clockwise direction")
motorFunctions.setAccelerationTime(90)  #9s
motorFunctions.setSpeed(900)  #900rpm
motorFunctions.startMotorForward()
time.sleep(9)  #accelerate for 9s
time.sleep(30)  #maintain speed for 30s TODO: add sensors, may need
motorFunctions.setSmallDecelerationTime(0.4)  #0.4s
motorFunctions.setSpeed(860)  #860rpm
time.sleep(0.4)  #decelerate for 0.4s TODO: add sensors
time.sleep(10)  #maintain speed for 10s TODO: sensors
motorFunctions.setDecelerationTime(90)  #9s deceleration time
motorFunctions.setSpeed(500)  #500rpm
time.sleep(9)  #decelerate for 9s TODO: sensors
time.sleep(30)  #maintain speed for 10s
motorFunctions.setSmallDecelerationTime(0.4)  #0.4s
motorFunctions.setSpeed(460)  #460rpm
time.sleep(0.4)  #decelerate for 0.4s TODO: sensors
time.sleep(10)  #maintain speed for 10s TODO: sensors
motorFunctions.setDecelerationTime(90)  #9s
motorFunctions.setSpeed100()  #100rpm
time.sleep(9)  #decelerate for 9s
time.sleep(30)  #maintain speed for 30s TODO: sensors
motorFunctions.setSmallDecelerationTime(0.4)  #0.4s
motorFunctions.setSpeed60()  #60rpm
time.sleep(0.4)  #decelerate for 0.4s TODO: sensors
time.sleep(10)  #maintain speed for 10s

Ejemplo n.º 2

import time
import resultByIDDao
import settings
import motorFunctions

motorFunctions.connectVFD()

#TODO: may need to change decelerationTime settings to accelerationTime
print("Starting Test 1: Run-In, Operating Temperature, and Vibration")
print("Test 1 - Clockwise direction")
motorFunctions.setAccelerationTime(90)  #9s
motorFunctions.setSpeed(900)  #900rpm target speed
motorFunctions.startMotorForward()
time.sleep(9)  #accelerate for 9s
time.sleep(
    20)  #maintain speed for 10min TODO: change value to 600, add sensors
motorFunctions.setDecelerationTime(360)  #36s
motorFunctions.stopMotor(
)  #TODO: check if this uses the right deceleration rate, change to startMotorForwards() with target speed 0 if not
time.sleep(36)  #decelerate for 36s
print("Test 1 - Anticlockwise direction")
#motorFunctions.setAccelerationTime(900) #9s acceleration time - should be already set from before
motorFunctions.startMotorReverse()
time.sleep(9)  #accelerate for 9s
time.sleep(20)  #maintain speed for 10min TODO: change to 600, add sensors
motorFunctions.stopMotor(
)  #TODO: check if this uses the right deceleration rate, change to startMotorBackwards() with target speed 0 if not
time.sleep(36)  #decelerate for 36s
print("Test 1 finished")

Ejemplo n.º 3

Archivo: motorRoutine.py Proyecto: VinceVia/FYDP

def MotorRoutine(StartPage):
    basetime = time.time()
    motorFunctions.connectVFD()

    #TODO: may need to change decelerationTime settings to accelerationTime
    print("Starting Test 1: Run-In, Operating Temperature, and Vibration")
    print("Test 1 - Clockwise direction")
    motorFunctions.setAccelerationTime(90)  #9s
    motorFunctions.setSpeed(900)  #900rpm target speed
    motorFunctions.startMotorForward()
    time.sleep(9)  #accelerate for 9s
    time.sleep(
        20)  #maintain speed for 10min TODO: change value to 600, add sensors
    motorFunctions.setDecelerationTime(360)  #36s
    motorFunctions.stopMotor(
    )  #TODO: check if this uses the right deceleration rate, change to startMotorForwards() with target speed 0 if not
    time.sleep(36)  #decelerate for 36s
    print("Test 1 - Anticlockwise direction")
    #motorFunctions.setAccelerationTime(900) #9s acceleration time - should be already set from before
    motorFunctions.startMotorReverse()
    time.sleep(9)  #accelerate for 9s
    time.sleep(20)  #maintain speed for 10min TODO: change to 600, add sensors
    motorFunctions.stopMotor(
    )  #TODO: check if this uses the right deceleration rate, change to startMotorBackwards() with target speed 0 if not
    time.sleep(36)  #decelerate for 36s
    print("Test 1 finished")

    print("Starting Test 2: Severe Skid Sensitivity Test")
    print("Test 2 - Clockwise direction")
    motorFunctions.setAccelerationTime(90)  #9s
    motorFunctions.setSpeed(900)  #900rpm
    motorFunctions.startMotorForward()
    time.sleep(9)  #accelerate for 9s
    time.sleep(30)  #maintain speed for 30s TODO: add sensors
    motorFunctions.setDecelerationTime(90)  #9s
    motorFunctions.stopMotor(
    )  #TODO: check if this uses the right deceleration rate, change to startMotorForwards() with target speed 0 if not
    print("Test 2 - Anticlockwise direction")
    motorFunctions.startMotorReverse()
    time.sleep(9)  #accelerate for 9s
    time.sleep(30)  #maintain speed for 30s TODO: add sensors
    #motorFunctions.setDecelerationTime(90) #9s
    motorFunctions.stopMotor(
    )  #TODO: check if this uses the right deceleration rate, change to startMotorForwards() with target speed 0 if not
    print("Test 2 finished")

    print("Starting Test 3: Short Skid Tests")
    print("Test 3 - Clockwise direction")
    motorFunctions.setAccelerationTime(90)  #9s
    motorFunctions.setSpeed(900)  #900rpm
    motorFunctions.startMotorForward()
    time.sleep(9)  #accelerate for 9s
    time.sleep(30)  #maintain speed for 30s TODO: add sensors, may need
    motorFunctions.setSmallDecelerationTime(0.4)  #0.4s
    motorFunctions.setSpeed(860)  #860rpm
    time.sleep(0.4)  #decelerate for 0.4s TODO: add sensors
    time.sleep(10)  #maintain speed for 10s TODO: sensors
    motorFunctions.setDecelerationTime(90)  #9s deceleration time
    motorFunctions.setSpeed(500)  #500rpm
    time.sleep(9)  #decelerate for 9s TODO: sensors
    time.sleep(30)  #maintain speed for 10s
    motorFunctions.setSmallDecelerationTime(0.4)  #0.4s
    motorFunctions.setSpeed(460)  #460rpm
    time.sleep(0.4)  #decelerate for 0.4s TODO: sensors
    time.sleep(10)  #maintain speed for 10s TODO: sensors
    motorFunctions.setDecelerationTime(90)  #9s
    motorFunctions.setSpeed100()  #100rpm
    time.sleep(9)  #decelerate for 9s
    time.sleep(30)  #maintain speed for 30s TODO: sensors
    motorFunctions.setSmallDecelerationTime(0.4)  #0.4s
    motorFunctions.setSpeed60()  #60rpm
    time.sleep(0.4)  #decelerate for 0.4s TODO: sensors
    time.sleep(10)  #maintain speed for 10s
    motorFunctions.setDecelerationTime(15)  #1.5s
    motorFunctions.stopMotor()
    time.sleep(1.5)  #decelerate for 1.5s
    time.sleep(1)  #rest for a second
    print("Test 3 - Anticlockwise direction")
    motorFunctions.setAccelerationTime(90)  #9s
    motorFunctions.setSpeed(900)  #900rpm
    motorFunctions.startMotorReverse()
    time.sleep(9)  #accelerate for 9s
    time.sleep(30)  #maintain speed for 30s TODO: add sensors, may need
    motorFunctions.setSmallDecelerationTime(0.4)  #0.4s
    motorFunctions.setSpeed(860)  #860rpm
    time.sleep(0.4)  #decelerate for 0.4s TODO: add sensors
    time.sleep(10)  #maintain speed for 10s TODO: sensors
    motorFunctions.setDecelerationTime(90)  #9s deceleration time
    motorFunctions.setSpeed(500)  #500rpm
    time.sleep(9)  #decelerate for 9s TODO: sensors
    time.sleep(30)  #maintain speed for 10s
    motorFunctions.setSmallDecelerationTime(0.4)  #0.4s
    motorFunctions.setSpeed(460)  #460rpm
    time.sleep(0.4)  #decelerate for 0.4s TODO: sensors
    time.sleep(10)  #maintain speed for 10s TODO: sensors
    motorFunctions.setDecelerationTime(90)  #9s
    motorFunctions.setSpeed100()  #100rpm
    time.sleep(9)  #decelerate for 9s
    time.sleep(30)  #maintain speed for 30s TODO: sensors
    motorFunctions.setSmallDecelerationTime(0.4)  #0.4s
    motorFunctions.setSpeed60()  #60rpm
    time.sleep(0.4)  #decelerate for 0.4s TODO: sensors
    time.sleep(10)  #maintain speed for 10s
    motorFunctions.setDecelerationTime(15)  #1.5s
    motorFunctions.stopMotor()
    time.sleep(1.5)  #decelerate for 1.5s
    print("Test 3 finished")

    print("Starting Test 4: Insensitivity Test")
    print("Test 4 - Clockwise direction")
    motorFunctions.setAccelerationTime(90)  #9s
    motorFunctions.setSpeed(900)  #900rpm
    motorFunctions.startMotorForward()
    time.sleep(9)  #accelerate for 9s
    time.sleep(30)  #maintain speed for 30s TODO: add sensors
    motorFunctions.setDecelerationTime(125)  #12.5s
    motorFunctions.stopMotor()
    time.sleep(12.5)  #decelerate for 12.5s
    print("Test 4 - Anticlockwise direction")
    motorFunctions.setAccelerationTime(90)  #9s
    motorFunctions.setSpeed(900)  #900rpm
    motorFunctions.startMotorReverse()
    time.sleep(9)  #accelerate for 9s
    time.sleep(30)  #maintain speed for 30s TODO: add sensors
    motorFunctions.setDecelerationTime(125)  #12.5s
    motorFunctions.stopMotor()
    time.sleep(12.5)  #decelerate for 12.5s
    print("Test 4 finished")

    #SET FAILURE MODE WHEN IT OCCURS IN TEST AND BREAK
    #FOR NOW ALWAYS SUCCESS

    print("SET TO SUCCESS")
    resultByIDDao.ResultByIDDao.setTestStatus(4)  #SUCCESS
    StartPage.status = StartPage.getStatus()
    StartPage.progress_label.configure(
        text=settings.languageList[1][settings.language] + ' ' +
        StartPage.status)

Ejemplo n.º 4

import time
import resultByIDDao
import settings
import motorFunctions

basetime = time.time()
motorFunctions.connectVFD()

print("Starting Test 2: Severe Skid Sensitivity Test")
print("Test 2 - Clockwise direction")
motorFunctions.setAccelerationTime(90)  #9s
motorFunctions.setSpeed(900)  #900rpm
motorFunctions.startMotorForward()
time.sleep(9)  #accelerate for 9s
time.sleep(30)  #maintain speed for 30s TODO: add sensors
motorFunctions.setDecelerationTime(90)  #9s
motorFunctions.stopMotor(
)  #TODO: check if this uses the right deceleration rate, change to startMotorForwards() with target speed 0 if not
print("Test 2 - Anticlockwise direction")
motorFunctions.startMotorReverse()
time.sleep(9)  #accelerate for 9s
time.sleep(30)  #maintain speed for 30s TODO: add sensors
#motorFunctions.setDecelerationTime(90) #9s
motorFunctions.stopMotor(
)  #TODO: check if this uses the right deceleration rate, change to startMotorForwards() with target speed 0 if not
print("Test 2 finished")

Ejemplo n.º 5

import time
import resultByIDDao
import settings
import motorFunctions

basetime = time.time()
motorFunctions.connectVFD()

print("Starting Test 4: Insensitivity Test")
print("Test 4 - Clockwise direction")
motorFunctions.setAccelerationTime(90)  #9s
motorFunctions.setSpeed(900)  #900rpm
motorFunctions.startMotorForward()
time.sleep(9)  #accelerate for 9s
time.sleep(30)  #maintain speed for 30s TODO: add sensors
motorFunctions.setDecelerationTime(125)  #12.5s
motorFunctions.stopMotor()
time.sleep(12.5)  #decelerate for 12.5s
print("Test 4 - Anticlockwise direction")
motorFunctions.setAccelerationTime(90)  #9s
motorFunctions.setSpeed(900)  #900rpm
motorFunctions.startMotorReverse()
time.sleep(9)  #accelerate for 9s
time.sleep(30)  #maintain speed for 30s TODO: add sensors
motorFunctions.setDecelerationTime(125)  #12.5s
motorFunctions.stopMotor()
time.sleep(12.5)  #decelerate for 12.5s
print("Test 4 finished")