mpr121.setup(0x5a)
# Track touches
touches = [0]
# initialize light
is_led_on = False
while True:
if (GPIO.input(7)): # Interupt pin is high
pass
else: # Interupt pin is low
touchData = mpr121.readData(0x5a)
for i in range(1):
if (touchData & (1 << i)):
if (touches[i] == 0):
print('Pin ' + str(i) + ' was just touched')
if (i == 0):
is_led_on = not is_led_on
GPIO.output(12, is_led_on)
time.sleep(.3)
#else:
# GPIO.output(12,is_led_on)
def touch():
from multiprocessing import Process, Queue
import RPi.GPIO as GPIO
import mpr121
import time
import subprocess
import os
global fail_work
# Use GPIO Interrupt Pin
GPIO.setmode(GPIO.BOARD)
GPIO.setup(7, GPIO.IN)
# Use mpr121 class for everything else
mpr121.TOU_THRESH = 0x30
mpr121.REL_THRESH = 0x33
mpr121.setup(0x5b)
# User pygame for sounds
# Track touches
touches = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
# 1~# button use
pass_pwd = [1, 2, 3, 4]
# setting pwd
pwd = [0, 0, 0, 0]
# pwd temp input
j = 0 # index
key = 0 # strlen(pwd) => door open
fail_work = 0
while True:
if (GPIO.input(7)): # Interupt pin is high
pass
else: # Interupt pin is low
touchData = mpr121.readData(0x5b)
for i in range(12):
if (touchData & (1 << i)):
if (touches[i] == 0):
print('Pin ' + (str(i + 1)) + ' was just touched')
time.sleep(0.3)
touches[i] = 1
pwd[j] = (i + 1)
if pass_pwd[j] == pwd[j]:
key = key + 1
j = j + 1
if j == 4:
j = 0
if key == 4:
print "-------motor O"
key = 0
else:
print "-------motor X"
key = 0
fail_work = fail_work + 1
#fail_call = "php putdata.php 2 "+"time " + str(fail_work)
#print fail_call
#print "fail : " + str(fail_work)
t = open("time.txt", 'r')
while True:
line = t.readline()
if not line:
break
fail_call = "php putdata.php 1 " + line + " " + str(
fail_work)
subprocess.call(fail_call, shell=True)
print fail_call
t.close()
else:
if (touches[i] == 1):
print('Pin ' + str(i + 1) + ' was just released')
time.sleep(0.3)
touches[i] = 0
print pwd
print key
# Track the touches with this array. If a beet has been touched, the corresponding value in the array becomes 1 touches = [0,0,0,0,0,0]; while True: # IRQ is the Interrupt Request signal pin. It is pulled up to 3.3V on the breakout and when the sensor chip detects a change in the touch sense switches, # the pin goes to 0V until the data is read over i2c. # This if checks if the interupt pin has a high signal. if so, break the loop. if (GPIO.input(7)): # If the GPIO's pin 7 (Interupt) is high pass else: # Interupt pin is low # Reads data from mpr121 through default address value of 0x5a. touchData = mpr121.readData(0x5a) # Simultaneously loop through each beet and check if it is touched. for i in range(6): #*give information about bitwise manipulation if (touchData & (1<<i)): # If the beet i is not currently touched and is touched, print the beet that was touched, and play the corresponding wav file. if (touches[i] == 0): ''' ADD A PRINT STATEMENT TO OUTPUT WHICH PIN WAS TOUCHED ''' # print( 'Pin ' + str(i) + ' was just touched') ''' USE PYGAME .PLAY() METHOD TO PLAY EACH SOUND BASED ON PIN (i VALUE) TOUCHED''' # if (i == 0): # kick.play()
drumKit.append(closedhh) drumKit.append(clap) drumKit.append(cymbal) # Track touches touches = [0,0,0,0,0,0]; #Run main loop while True: try: #Detect input if (GPIO.input(7)): # Interupt pin is high pass else: # Interupt pin is low touchData = mpr121.readData(0x5a) #Take data from SDA Line for i in range(6): #Checks each touch value if (touchData & (1<<i)): if (touches[i] == 0): print( 'Pin ' + str(i) + ' was just touched') #Track changes, can be commented out drumKit[i].play() #if (i == 0): # kick.play() #elif (i == 1): # snare.play() #elif (i == 2): # openhh.play() #elif (i == 3): # closedhh.play() #elif (i == 4):