def test_unsupported_version(self):
page = OggPage(open(self.filename, "rb"))
data = bytearray(page.packets[0])
data[8] = 0x03
page.packets[0] = bytes(data)
OggOpusInfo(BytesIO(page.write()))
data[8] = 0x10
page.packets[0] = bytes(data)
self.failUnlessRaises(IOError, OggOpusInfo, BytesIO(page.write()))
def __init__(self, fileobj, info):
pages = self.__get_comment_pages(fileobj, info)
data = OggPage.to_packets(pages)[0][8:] # Strip OpusTags
fileobj = BytesIO(data)
super(OggOpusVComment, self).__init__(fileobj, framing=False)
# in case the LSB of the first byte after v-comment is 1, preserve the
# following data
padding_flag = fileobj.read(1)
if padding_flag and ord(padding_flag) & 0x1:
self._pad_data = padding_flag + fileobj.read()
else:
self._pad_data = b""
def test_renumber_extradata(self):
fileobj = BytesIO()
for page in self.pages:
fileobj.write(page.write())
fileobj.write(b"left over data")
fileobj.seek(0)
# Trying to rewrite should raise an error...
self.failUnlessRaises(Exception, OggPage.renumber, fileobj, 1, 10)
fileobj.seek(0)
# But the already written data should remain valid,
pages = [OggPage(fileobj) for i in range(3)]
self.failUnlessEqual([page.sequence for page in pages], [10, 11, 12])
# And the garbage that caused the error should be okay too.
self.failUnlessEqual(fileobj.read(), b"left over data")
def test_replace_continued(self):
# take a partial packet and replace it with a new page
# replace() should make it spanning again
fileobj = BytesIO()
pages = [OggPage(), OggPage()]
pages[0].serial = 1
pages[0].sequence = 0
pages[0].complete = False
pages[0].packets = [b"foo"]
pages[1].serial = 1
pages[1].sequence = 1
pages[1].continued = True
pages[1].packets = [b"bar"]
fileobj = BytesIO()
for page in pages:
fileobj.write(page.write())
fileobj.seek(0, 0)
pages_from_file = [OggPage(fileobj), OggPage(fileobj)]
self.assertEqual(OggPage.to_packets(pages_from_file), [b"foobar"])
packets_part = OggPage.to_packets([pages_from_file[0]])
self.assertEqual(packets_part, [b"foo"])
new_pages = OggPage.from_packets([b"quuux"])
OggPage.replace(fileobj, [pages_from_file[0]], new_pages)
fileobj.seek(0, 0)
written = OggPage.to_packets([OggPage(fileobj), OggPage(fileobj)])
self.assertEquals(written, [b"quuuxbar"])
def __init__(self, fileobj, info):
pages = self.__get_comment_pages(fileobj, info)
data = OggPage.to_packets(pages)[0][8:] # Strip OpusTags
fileobj = BytesIO(data)
super(OggOpusVComment, self).__init__(fileobj, framing=False)
self._padding = len(data) - self._size
# in case the LSB of the first byte after v-comment is 1, preserve the
# following data
padding_flag = fileobj.read(1)
if padding_flag and ord(padding_flag) & 0x1:
self._pad_data = padding_flag + fileobj.read()
self._padding = 0 # we have to preserve, so no padding
else:
self._pad_data = b""
def test_renumber_muxed(self):
pages = [OggPage() for i in range(10)]
for seq, page in enumerate(pages[0:1] + pages[2:]):
page.serial = 0
page.sequence = seq
pages[1].serial = 2
pages[1].sequence = 100
data = BytesIO(b"".join([page.write() for page in pages]))
OggPage.renumber(data, 0, 20)
data.seek(0)
pages = [OggPage(data) for i in range(10)]
self.failUnlessEqual(pages[1].serial, 2)
self.failUnlessEqual(pages[1].sequence, 100)
pages.pop(1)
self.failUnlessEqual([page.sequence for page in pages], list(range(20, 29)))
def test_renumber_muxed(self):
pages = [OggPage() for i in range(10)]
for seq, page in enumerate(pages[0:1] + pages[2:]):
page.serial = 0
page.sequence = seq
pages[1].serial = 2
pages[1].sequence = 100
data = BytesIO(b"".join([page.write() for page in pages]))
OggPage.renumber(data, 0, 20)
data.seek(0)
pages = [OggPage(data) for i in range(10)]
self.failUnlessEqual(pages[1].serial, 2)
self.failUnlessEqual(pages[1].sequence, 100)
pages.pop(1)
self.failUnlessEqual([page.sequence for page in pages],
list(range(20, 29)))
def test_find_last(self):
pages = [OggPage() for i in range(10)]
for i, page in enumerate(pages):
page.sequence = i
data = BytesIO(b"".join([page.write() for page in pages]))
self.failUnlessEqual(OggPage.find_last(data, pages[0].serial),
pages[-1])
def test_find_last_single_muxed(self):
page1 = OggPage()
page1.last = True
page2 = OggPage()
page2.serial = page1.serial + 1
pages = [page1, page2]
data = BytesIO(b"".join([page.write() for page in pages]))
assert OggPage.find_last(data, page2.serial).serial == page2.serial
def test_resize_dev_full(self):
def raise_no_space(*args):
raise IOError(errno.ENOSPC, os.strerror(errno.ENOSPC))
# fail on first write
h = BytesIO(b"abc")
h.write = raise_no_space
self.assertRaises(IOError, resize_file, h, 1)
h.seek(0, 2)
self.assertEqual(h.tell(), 3)
# fail on flush
h = BytesIO(b"abc")
h.flush = raise_no_space
self.assertRaises(IOError, resize_file, h, 1)
h.seek(0, 2)
self.assertEqual(h.tell(), 3)
def test_find_last_none_finishing_mux(self):
page1 = OggPage()
page1.last = True
page1.position = -1
page2 = OggPage()
page2.serial = page1.serial + 1
pages = [page1, page2]
data = BytesIO(b"".join([page.write() for page in pages]))
assert OggPage.find_last(data, page1.serial, finishing=True) is None
assert OggPage.find_last(data, page2.serial, finishing=True) == page2
def test_replace_fast_path(self):
# create interleaved pages
fileobj = BytesIO()
pages = [OggPage(), OggPage(), OggPage()]
pages[0].serial = 42
pages[0].sequence = 0
pages[0].packets = [b"foo"]
pages[1].serial = 24
pages[1].sequence = 0
pages[1].packets = [b"bar"]
pages[2].serial = 42
pages[2].sequence = 1
pages[2].packets = [b"baz"]
for page in pages:
fileobj.write(page.write())
fileobj.seek(0, 0)
pages_from_file = [
OggPage(fileobj),
OggPage(fileobj),
OggPage(fileobj)
]
old_pages = [pages_from_file[0], pages_from_file[2]]
packets = OggPage.to_packets(old_pages, strict=True)
self.assertEqual(packets, [b"foo", b"baz"])
new_packets = [b"111", b"222"]
new_pages = OggPage._from_packets_try_preserve(new_packets, old_pages)
self.assertEqual(len(new_pages), 2)
# remove insert_bytes, so we can be sure the fast path was taken
old_insert_bytes = _util.insert_bytes
_util.insert_bytes = None
try:
OggPage.replace(fileobj, old_pages, new_pages)
finally:
_util.insert_bytes = old_insert_bytes
# validate that the new data was written and the other pages
# are untouched
fileobj.seek(0, 0)
pages_from_file = [
OggPage(fileobj),
OggPage(fileobj),
OggPage(fileobj)
]
packets = OggPage.to_packets([pages_from_file[0], pages_from_file[2]],
strict=True)
self.assertEqual(packets, [b"111", b"222"])
packets = OggPage.to_packets([pages_from_file[1]], strict=True)
self.assertEqual(packets, [b"bar"])
def test_read_max_size(self):
page = OggPage()
page.packets = [b"1" * 255 * 255]
page.complete = False
page2 = OggPage()
page2.packets = [b"", b"foo"]
page2.sequence = 1
page2.continued = True
data = page.write() + page2.write()
fileobj = BytesIO(data)
self.failUnlessEqual(OggPage(fileobj), page)
self.failUnlessEqual(OggPage(fileobj), page2)
self.failUnlessRaises(EOFError, OggPage, fileobj)
def test_find_last_last_empty(self):
# https://github.com/quodlibet/mutagen/issues/308
pages = [OggPage() for i in xrange(10)]
for i, page in enumerate(pages):
page.sequence = i
page.position = i
pages[-1].last = True
pages[-1].position = -1
data = BytesIO(b"".join([page.write() for page in pages]))
page = OggPage.find_last(data, pages[-1].serial, finishing=True)
assert page is not None
assert page.position == 8
page = OggPage.find_last(data, pages[-1].serial, finishing=False)
assert page is not None
assert page.position == -1
def test_replace_fast_path(self):
# create interleaved pages
fileobj = BytesIO()
pages = [OggPage(), OggPage(), OggPage()]
pages[0].serial = 42
pages[0].sequence = 0
pages[0].packets = [b"foo"]
pages[1].serial = 24
pages[1].sequence = 0
pages[1].packets = [b"bar"]
pages[2].serial = 42
pages[2].sequence = 1
pages[2].packets = [b"baz"]
for page in pages:
fileobj.write(page.write())
fileobj.seek(0, 0)
pages_from_file = [OggPage(fileobj), OggPage(fileobj),
OggPage(fileobj)]
old_pages = [pages_from_file[0], pages_from_file[2]]
packets = OggPage.to_packets(old_pages, strict=True)
self.assertEqual(packets, [b"foo", b"baz"])
new_packets = [b"111", b"222"]
new_pages = OggPage._from_packets_try_preserve(new_packets, old_pages)
self.assertEqual(len(new_pages), 2)
# remove insert_bytes, so we can be sure the fast path was taken
old_insert_bytes = _util.insert_bytes
_util.insert_bytes = None
try:
OggPage.replace(fileobj, old_pages, new_pages)
finally:
_util.insert_bytes = old_insert_bytes
# validate that the new data was written and the other pages
# are untouched
fileobj.seek(0, 0)
pages_from_file = [OggPage(fileobj), OggPage(fileobj),
OggPage(fileobj)]
packets = OggPage.to_packets(
[pages_from_file[0], pages_from_file[2]], strict=True)
self.assertEqual(packets, [b"111", b"222"])
packets = OggPage.to_packets([pages_from_file[1]], strict=True)
self.assertEqual(packets, [b"bar"])
def test_replace(self):
# create interleaved pages
fileobj = BytesIO()
pages = [OggPage(), OggPage(), OggPage()]
pages[0].serial = 42
pages[0].sequence = 0
pages[0].packets = [b"foo"]
pages[1].serial = 24
pages[1].sequence = 0
pages[1].packets = [b"bar"]
pages[2].serial = 42
pages[2].sequence = 1
pages[2].packets = [b"baz"]
for page in pages:
fileobj.write(page.write())
fileobj.seek(0, 0)
pages_from_file = [
OggPage(fileobj),
OggPage(fileobj),
OggPage(fileobj)
]
old_pages = [pages_from_file[0], pages_from_file[2]]
packets = OggPage.to_packets(old_pages, strict=True)
self.assertEqual(packets, [b"foo", b"baz"])
new_packets = [b"1111", b"2222"]
new_pages = OggPage.from_packets(new_packets,
sequence=old_pages[0].sequence)
self.assertEqual(len(new_pages), 1)
OggPage.replace(fileobj, old_pages, new_pages)
fileobj.seek(0, 0)
first = OggPage(fileobj)
self.assertEqual(first.serial, 42)
self.assertEqual(OggPage.to_packets([first], strict=True),
[b"1111", b"2222"])
second = OggPage(fileobj)
self.assertEqual(second.serial, 24)
self.assertEqual(OggPage.to_packets([second], strict=True), [b"bar"])
def test_replace(self):
# create interleaved pages
fileobj = BytesIO()
pages = [OggPage(), OggPage(), OggPage()]
pages[0].serial = 42
pages[0].sequence = 0
pages[0].packets = [b"foo"]
pages[1].serial = 24
pages[1].sequence = 0
pages[1].packets = [b"bar"]
pages[2].serial = 42
pages[2].sequence = 1
pages[2].packets = [b"baz"]
for page in pages:
fileobj.write(page.write())
fileobj.seek(0, 0)
pages_from_file = [OggPage(fileobj), OggPage(fileobj),
OggPage(fileobj)]
old_pages = [pages_from_file[0], pages_from_file[2]]
packets = OggPage.to_packets(old_pages, strict=True)
self.assertEqual(packets, [b"foo", b"baz"])
new_packets = [b"1111", b"2222"]
new_pages = OggPage.from_packets(new_packets,
sequence=old_pages[0].sequence)
self.assertEqual(len(new_pages), 1)
OggPage.replace(fileobj, old_pages, new_pages)
fileobj.seek(0, 0)
first = OggPage(fileobj)
self.assertEqual(first.serial, 42)
self.assertEqual(OggPage.to_packets([first], strict=True),
[b"1111", b"2222"])
second = OggPage(fileobj)
self.assertEqual(second.serial, 24)
self.assertEqual(OggPage.to_packets([second], strict=True), [b"bar"])
def test_renumber(self):
self.failUnlessEqual([page.sequence for page in self.pages], [0, 1, 2])
fileobj = BytesIO()
for page in self.pages:
fileobj.write(page.write())
fileobj.seek(0)
OggPage.renumber(fileobj, 1, 10)
fileobj.seek(0)
pages = [OggPage(fileobj) for i in range(3)]
self.failUnlessEqual([page.sequence for page in pages], [10, 11, 12])
fileobj.seek(0)
OggPage.renumber(fileobj, 1, 20)
fileobj.seek(0)
pages = [OggPage(fileobj) for i in range(3)]
self.failUnlessEqual([page.sequence for page in pages], [20, 21, 22])
def test_single_page_roundtrip(self):
self.failUnlessEqual(self.page, OggPage(BytesIO(self.page.write())))
def test_find_last_invalid_sync(self):
data = BytesIO(b"if you think this is an OggS, you're crazy")
page = OggPage.find_last(data, 0)
self.failIf(page)
def test_find_last_invalid(self):
data = BytesIO(b"if you think this is an Ogg, you're crazy")
self.failUnlessRaises(OggError, OggPage.find_last, data, 0)
def test_not_enough_data(self):
data = OggPage().write()[:-1] + b"\x01\x10"
self.failUnlessRaises(OggError, OggPage, BytesIO(data))
def test_invalid_version(self):
page = OggPage()
OggPage(BytesIO(page.write()))
page.version = 1
self.failUnlessRaises(OggError, OggPage, BytesIO(page.write()))
def test_complete_zero_length(self):
packets = [b""] * 20
page = OggPage.from_packets(packets)[0]
new_page = OggPage(BytesIO(page.write()))
self.failUnlessEqual(new_page, page)
self.failUnlessEqual(OggPage.to_packets([new_page]), packets)
def test_renumber(self):
self.failUnlessEqual(
[page.sequence for page in self.pages], [0, 1, 2])
fileobj = BytesIO()
for page in self.pages:
fileobj.write(page.write())
fileobj.seek(0)
OggPage.renumber(fileobj, 1, 10)
fileobj.seek(0)
pages = [OggPage(fileobj) for i in range(3)]
self.failUnlessEqual([page.sequence for page in pages], [10, 11, 12])
fileobj.seek(0)
OggPage.renumber(fileobj, 1, 20)
fileobj.seek(0)
pages = [OggPage(fileobj) for i in range(3)]
self.failUnlessEqual([page.sequence for page in pages], [20, 21, 22])
def test_renumber_extradata(self):
fileobj = BytesIO()
for page in self.pages:
fileobj.write(page.write())
fileobj.write(b"left over data")
fileobj.seek(0)
# Trying to rewrite should raise an error...
self.failUnlessRaises(Exception, OggPage.renumber, fileobj, 1, 10)
fileobj.seek(0)
# But the already written data should remain valid,
pages = [OggPage(fileobj) for i in range(3)]
self.failUnlessEqual([page.sequence for page in pages], [10, 11, 12])
# And the garbage that caused the error should be okay too.
self.failUnlessEqual(fileobj.read(), b"left over data")
def test_invalid_not_first(self):
page = OggPage(open(self.filename, "rb"))
page.first = False
self.failUnlessRaises(IOError, OggOpusInfo, BytesIO(page.write()))
def test_find_last_no_serial(self):
pages = [OggPage() for i in xrange(10)]
for i, page in enumerate(pages):
page.sequence = i
data = BytesIO(b"".join([page.write() for page in pages]))
self.failUnless(OggPage.find_last(data, pages[0].serial + 1) is None)
def test_resize_dev_full(self):
def raise_no_space(*args):
raise IOError(errno.ENOSPC, os.strerror(errno.ENOSPC))
# fail on first write
h = BytesIO(b"abc")
h.write = raise_no_space
self.assertRaises(IOError, resize_file, h, 1)
h.seek(0, 2)
self.assertEqual(h.tell(), 3)
# fail on flush
h = BytesIO(b"abc")
h.flush = raise_no_space
self.assertRaises(IOError, resize_file, h, 1)
h.seek(0, 2)
self.assertEqual(h.tell(), 3)
def test_find_last_none_finishing(self):
page = OggPage()
page.position = -1
data = BytesIO(page.write())
assert OggPage.find_last(data, page.serial, finishing=True) is None
