def output_add(form_add):
action = '{action} {controller}'.format(
action=TRANSLATIONS['add']['title'],
controller=TRANSLATIONS['output']['title'])
error = []
dep_unmet, _ = return_dependencies(form_add.output_type.data.split(',')[0])
if dep_unmet:
list_unmet_deps = []
for each_dep in dep_unmet:
list_unmet_deps.append(each_dep[0])
error.append(
"The {dev} device you're trying to add has unmet dependencies: "
"{dep}".format(dev=form_add.output_type.data,
dep=', '.join(list_unmet_deps)))
if len(form_add.output_type.data.split(',')) < 2:
error.append("Must select an Output type")
if not is_int(form_add.output_quantity.data, check_range=[1, 20]):
error.append("{error}. {accepted_values}: 1-20".format(
error=gettext("Invalid quantity"),
accepted_values=gettext("Acceptable values")
))
if not error:
for _ in range(0, form_add.output_quantity.data):
try:
output_type = form_add.output_type.data.split(',')[0]
interface = form_add.output_type.data.split(',')[1]
new_output = Output()
new_output.name = str(OUTPUT_INFO[output_type]['name'])
new_output.output_type = output_type
new_output.interface = interface
if output_type in ['wired',
'wireless_rpi_rf',
'command',
'python']:
new_output.measurement = 'duration_time'
new_output.unit = 's'
elif output_type in ['command_pwm',
'pwm',
'python_pwm']:
new_output.measurement = 'duty_cycle'
new_output.unit = 'percent'
elif output_type == 'atlas_ezo_pmp':
new_output.measurement = 'volume'
new_output.unit = 'ml'
new_output.channel = 0
if output_type == 'wired':
new_output.on_at_start = False
elif output_type == 'wireless_rpi_rf':
new_output.pin = None
new_output.protocol = 1
new_output.pulse_length = 189
new_output.on_command = '22559'
new_output.off_command = '22558'
elif output_type == 'command':
new_output.on_command = '/home/pi/script_on.sh'
new_output.off_command = '/home/pi/script_off.sh'
elif output_type == 'command_pwm':
new_output.pwm_command = '/home/pi/script_pwm.sh ((duty_cycle))'
elif output_type == 'pwm':
new_output.pwm_hertz = 22000
new_output.pwm_library = 'pigpio_any'
elif output_type == 'python':
new_output.on_command = """
timestamp = datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")
write_string = "{ts}: ID: {id}: ON\\n".format(id=output_id, ts=timestamp)
with open("/home/pi/Mycodo/OutputTest.txt", "a") as myfile:
myfile.write(write_string)"""
new_output.off_command = """
timestamp = datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")
write_string = "{ts}: ID: {id}: OFF\\n".format(id=output_id, ts=timestamp)
with open("/home/pi/Mycodo/OutputTest.txt", "a") as myfile:
myfile.write(write_string)"""
elif output_type == 'python_pwm':
new_output.pwm_command = """
timestamp = datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")
write_string = "{ts}: ID: {id}: Duty Cycle: ((duty_cycle)) %\\n".format(
id=output_id, ts=timestamp)
with open("/home/pi/Mycodo/OutputTest.txt", "a") as myfile:
myfile.write(write_string)"""
elif output_type == 'atlas_ezo_pmp':
new_output.flow_rate = 10
if interface == 'I2C':
new_output.location = '0x67'
new_output.i2c_bus = 1
elif interface == 'UART':
new_output.location = '/dev/ttyAMA0'
new_output.baud_rate = 9600
if not error:
new_output.save()
display_order = csv_to_list_of_str(
DisplayOrder.query.first().output)
DisplayOrder.query.first().output = add_display_order(
display_order, new_output.unique_id)
db.session.commit()
manipulate_output('Add', new_output.unique_id)
except sqlalchemy.exc.OperationalError as except_msg:
error.append(except_msg)
except sqlalchemy.exc.IntegrityError as except_msg:
error.append(except_msg)
flash_success_errors(error, action, url_for('routes_page.page_output'))
if dep_unmet:
return 1
def output_add(form_add):
action = '{action} {controller}'.format(
action=TRANSLATIONS['add']['title'],
controller=TRANSLATIONS['output']['title'])
error = []
dep_unmet, _ = return_dependencies(form_add.output_type.data.split(',')[0])
if dep_unmet:
list_unmet_deps = []
for each_dep in dep_unmet:
list_unmet_deps.append(each_dep[0])
error.append(
"The {dev} device you're trying to add has unmet dependencies: "
"{dep}".format(dev=form_add.output_type.data,
dep=', '.join(list_unmet_deps)))
if len(form_add.output_type.data.split(',')) < 2:
error.append("Must select an Output type")
if not is_int(form_add.output_quantity.data, check_range=[1, 20]):
error.append("{error}. {accepted_values}: 1-20".format(
error=gettext("Invalid quantity"),
accepted_values=gettext("Acceptable values")))
if not error:
for _ in range(0, form_add.output_quantity.data):
try:
output_type = form_add.output_type.data.split(',')[0]
interface = form_add.output_type.data.split(',')[1]
new_output = Output()
new_output.name = str(OUTPUT_INFO[output_type]['name'])
new_output.output_type = output_type
new_output.interface = interface
if output_type in [
'wired', 'wireless_rpi_rf', 'command', 'python'
]:
new_output.measurement = 'duration_time'
new_output.unit = 's'
elif output_type in OUTPUTS_PWM:
new_output.measurement = 'duty_cycle'
new_output.unit = 'percent'
new_output.channel = 0
if output_type == 'wired':
new_output.state_startup = '0'
new_output.state_shutdown = '0'
elif output_type == 'wireless_rpi_rf':
new_output.pin = None
new_output.protocol = 1
new_output.pulse_length = 189
new_output.on_command = '22559'
new_output.off_command = '22558'
elif output_type == 'command':
new_output.on_command = '/home/pi/script_on.sh'
new_output.off_command = '/home/pi/script_off.sh'
elif output_type == 'command_pwm':
new_output.pwm_command = '/home/pi/script_pwm.sh ((duty_cycle))'
elif output_type == 'pwm':
new_output.pwm_hertz = 22000
new_output.pwm_library = 'pigpio_any'
elif output_type == 'python':
new_output.on_command = """
timestamp = datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")
write_string = "{ts}: ID: {id}: ON\\n".format(id=output_id, ts=timestamp)
with open("/home/pi/Mycodo/OutputTest.txt", "a") as myfile:
myfile.write(write_string)"""
new_output.off_command = """
timestamp = datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")
write_string = "{ts}: ID: {id}: OFF\\n".format(id=output_id, ts=timestamp)
with open("/home/pi/Mycodo/OutputTest.txt", "a") as myfile:
myfile.write(write_string)"""
elif output_type == 'python_pwm':
new_output.pwm_command = """
timestamp = datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")
write_string = "{ts}: ID: {id}: Duty Cycle: ((duty_cycle)) %\\n".format(
id=output_id, ts=timestamp)
with open("/home/pi/Mycodo/OutputTest.txt", "a") as myfile:
myfile.write(write_string)"""
elif output_type == 'atlas_ezo_pmp':
new_output.output_mode = 'fastest_flow_rate'
new_output.flow_rate = 10
if interface == 'FTDI':
new_output.location = '/dev/ttyUSB0'
elif interface == 'I2C':
new_output.location = '0x67'
new_output.i2c_bus = 1
elif interface == 'UART':
new_output.location = '/dev/ttyAMA0'
new_output.baud_rate = 9600
if not error:
new_output.save()
display_order = csv_to_list_of_str(
DisplayOrder.query.first().output)
DisplayOrder.query.first().output = add_display_order(
display_order, new_output.unique_id)
db.session.commit()
# Add device measurements
for measurement, measure_data in OUTPUT_INFO[
new_output.output_type]['measure'].items():
for unit, unit_data in measure_data.items():
for channel, _ in unit_data.items():
new_measurement = DeviceMeasurements()
new_measurement.device_id = new_output.unique_id
new_measurement.name = ''
new_measurement.is_enabled = True
new_measurement.measurement = measurement
new_measurement.unit = unit
new_measurement.channel = channel
new_measurement.save()
manipulate_output('Add', new_output.unique_id)
except sqlalchemy.exc.OperationalError as except_msg:
error.append(except_msg)
except sqlalchemy.exc.IntegrityError as except_msg:
error.append(except_msg)
flash_success_errors(error, action, url_for('routes_page.page_output'))
if dep_unmet:
return 1
def output_add(form_add):
action = '{action} {controller}'.format(
action=TRANSLATIONS['add']['title'],
controller=TRANSLATIONS['output']['title'])
error = []
dict_outputs = parse_output_information()
# only one comma should be in the output_type string
if form_add.output_type.data.count(',') > 1:
error.append("Invalid output module formatting. It appears there is "
"a comma in either 'output_name_unique' or 'interfaces'.")
if form_add.output_type.data.count(',') == 1:
output_type = form_add.output_type.data.split(',')[0]
output_interface = form_add.output_type.data.split(',')[1]
else:
output_type = ''
output_interface = ''
error.append(
"Invalid output string (must be a comma-separated string)")
if current_app.config['TESTING']:
dep_unmet = False
else:
dep_unmet, _ = return_dependencies(
form_add.output_type.data.split(',')[0])
if dep_unmet:
list_unmet_deps = []
for each_dep in dep_unmet:
list_unmet_deps.append(each_dep[0])
error.append(
"The {dev} device you're trying to add has unmet dependencies: "
"{dep}".format(dev=form_add.output_type.data,
dep=', '.join(list_unmet_deps)))
if not is_int(form_add.output_quantity.data, check_range=[1, 20]):
error.append("{error}. {accepted_values}: 1-20".format(
error=gettext("Invalid quantity"),
accepted_values=gettext("Acceptable values")))
if not error:
for _ in range(0, form_add.output_quantity.data):
try:
new_output = Output()
new_output.name = "Name"
new_output.output_type = output_type
new_output.interface = output_interface
#
# Set default values for new input being added
#
# input add options
if output_type in dict_outputs:
def dict_has_value(key):
if (key in dict_outputs[output_type]
and (dict_outputs[output_type][key]
or dict_outputs[output_type][key] == 0)):
return True
#
# Interfacing options
#
if output_interface == 'I2C':
if dict_has_value('i2c_location'):
new_output.i2c_location = dict_outputs[
output_type]['i2c_location'][
0] # First list entry
if output_interface == 'FTDI':
if dict_has_value('ftdi_location'):
new_output.ftdi_location = dict_outputs[
output_type]['ftdi_location']
if output_interface == 'UART':
if dict_has_value('uart_location'):
new_output.uart_location = dict_outputs[
output_type]['uart_location']
# UART options
if dict_has_value('uart_baud_rate'):
new_output.baud_rate = dict_outputs[output_type][
'uart_baud_rate']
if dict_has_value('pin_cs'):
new_output.pin_cs = dict_outputs[output_type]['pin_cs']
if dict_has_value('pin_miso'):
new_output.pin_miso = dict_outputs[output_type][
'pin_miso']
if dict_has_value('pin_mosi'):
new_output.pin_mosi = dict_outputs[output_type][
'pin_mosi']
if dict_has_value('pin_clock'):
new_output.pin_clock = dict_outputs[output_type][
'pin_clock']
# Bluetooth (BT) options
elif output_interface == 'BT':
if dict_has_value('bt_location'):
new_output.location = dict_outputs[output_type][
'bt_location']
if dict_has_value('bt_adapter'):
new_output.bt_adapter = dict_outputs[output_type][
'bt_adapter']
# GPIO options
elif output_interface == 'GPIO':
if dict_has_value('gpio_pin'):
new_output.pin = dict_outputs[output_type][
'gpio_pin']
# Custom location location
elif dict_has_value('location'):
new_output.location = dict_outputs[output_type][
'location']['options'][0][0] # First entry in list
#
# Custom Options
#
list_options = []
if 'custom_options' in dict_outputs[output_type]:
for each_option in dict_outputs[output_type][
'custom_options']:
if each_option['default_value'] is False:
default_value = ''
else:
default_value = each_option['default_value']
option = '{id},{value}'.format(id=each_option['id'],
value=default_value)
list_options.append(option)
new_output.custom_options = ';'.join(list_options)
if 'on_off' in dict_outputs[output_type]['output_types']:
new_output.measurement = 'duration_time'
new_output.unit = 's'
elif output_type in outputs_pwm():
new_output.measurement = 'duty_cycle'
new_output.unit = 'percent'
new_output.pwm_hertz = 22000
new_output.pwm_library = 'pigpio_any'
new_output.channel = 0
if output_type == 'wired':
new_output.state_startup = '0'
new_output.state_shutdown = '0'
elif output_type == 'wireless_rpi_rf':
new_output.pin = None
new_output.protocol = 1
new_output.pulse_length = 189
new_output.on_command = '22559'
new_output.off_command = '22558'
new_output.force_command = True
elif output_type == 'command':
new_output.linux_command_user = '******'
new_output.on_command = '/home/pi/script_on.sh'
new_output.off_command = '/home/pi/script_off.sh'
new_output.force_command = True
elif output_type == 'command_pwm':
new_output.linux_command_user = '******'
new_output.pwm_command = '/home/pi/script_pwm.sh ((duty_cycle))'
elif output_type == 'python':
new_output.on_command = """
import datetime
timestamp = datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")
log_string = "{ts}: ID: {id}: ON".format(id=output_id, ts=timestamp)
self.logger.info(log_string)"""
new_output.off_command = """
import datetime
timestamp = datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")
log_string = "{ts}: ID: {id}: OFF".format(id=output_id, ts=timestamp)
self.logger.info(log_string)"""
new_output.force_command = True
elif output_type == 'python_pwm':
new_output.pwm_command = """
import datetime
timestamp = datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")
log_string = "{ts}: ID: {id}: {dc} % Duty Cycle".format(
dc=duty_cycle, id=output_id, ts=timestamp)
self.logger.info(log_string)"""
elif output_type == 'atlas_ezo_pmp':
new_output.output_mode = 'fastest_flow_rate'
new_output.flow_rate = 10
if output_interface == 'FTDI':
new_output.location = '/dev/ttyUSB0'
elif output_interface == 'I2C':
new_output.location = '0x67'
new_output.i2c_bus = 1
elif output_interface == 'UART':
new_output.location = '/dev/ttyAMA0'
new_output.baud_rate = 9600
if not error:
new_output.save()
display_order = csv_to_list_of_str(
DisplayOrder.query.first().output)
DisplayOrder.query.first().output = add_display_order(
display_order, new_output.unique_id)
#
# If measurements defined in the Output Module
#
if ('measurements_dict' in dict_outputs[output_type]
and dict_outputs[output_type]['measurements_dict']
!= []):
for each_channel in dict_outputs[output_type][
'measurements_dict']:
measure_info = dict_outputs[output_type][
'measurements_dict'][each_channel]
new_measurement = DeviceMeasurements()
if 'name' in measure_info:
new_measurement.name = measure_info['name']
new_measurement.device_id = new_output.unique_id
new_measurement.measurement = measure_info[
'measurement']
new_measurement.unit = measure_info['unit']
new_measurement.channel = each_channel
new_measurement.save()
db.session.commit()
if not current_app.config['TESTING']:
manipulate_output('Add', new_output.unique_id)
except sqlalchemy.exc.OperationalError as except_msg:
error.append(except_msg)
except sqlalchemy.exc.IntegrityError as except_msg:
error.append(except_msg)
flash_success_errors(error, action, url_for('routes_page.page_output'))
if dep_unmet:
return 1