Ejemplo n.º 1
0
async def async_setup(hass, config):
    """Set up the Ness Alarm platform."""
    from nessclient import Client, ArmingState
    conf = config[DOMAIN]

    zones = conf[CONF_ZONES]
    host = conf[CONF_DEVICE_HOST]
    port = conf[CONF_DEVICE_PORT]

    client = Client(host=host, port=port, loop=hass.loop)
    hass.data[DATA_NESS] = client

    async def _close(event):
        await client.close()

    hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, _close)

    hass.async_create_task(
        async_load_platform(hass, 'binary_sensor', DOMAIN, {CONF_ZONES: zones},
                            config))
    hass.async_create_task(
        async_load_platform(hass, 'alarm_control_panel', DOMAIN, {}, config))

    def on_zone_change(zone_id: int, state: bool):
        """Receives and propagates zone state updates."""
        async_dispatcher_send(hass, SIGNAL_ZONE_CHANGED,
                              ZoneChangedData(
                                  zone_id=zone_id,
                                  state=state,
                              ))

    def on_state_change(arming_state: ArmingState):
        """Receives and propagates arming state updates."""
        async_dispatcher_send(hass, SIGNAL_ARMING_STATE_CHANGED, arming_state)

    client.on_zone_change(on_zone_change)
    client.on_state_change(on_state_change)

    # Force update for current arming status and current zone states
    hass.loop.create_task(client.keepalive())
    hass.loop.create_task(client.update())

    async def handle_panic(call):
        await client.panic(call.data[ATTR_CODE])

    async def handle_aux(call):
        await client.aux(call.data[ATTR_OUTPUT_ID], call.data[ATTR_STATE])

    hass.services.async_register(DOMAIN,
                                 SERVICE_PANIC,
                                 handle_panic,
                                 schema=SERVICE_SCHEMA_PANIC)
    hass.services.async_register(DOMAIN,
                                 SERVICE_AUX,
                                 handle_aux,
                                 schema=SERVICE_SCHEMA_AUX)

    return True
Ejemplo n.º 2
0
async def async_setup(hass, config):
    """Set up the Ness Alarm platform."""
    from nessclient import Client, ArmingState
    conf = config[DOMAIN]

    zones = conf[CONF_ZONES]
    host = conf[CONF_HOST]
    port = conf[CONF_DEVICE_PORT]
    scan_interval = conf[CONF_SCAN_INTERVAL]
    infer_arming_state = conf[CONF_INFER_ARMING_STATE]

    client = Client(host=host, port=port, loop=hass.loop,
                    update_interval=scan_interval.total_seconds(),
                    infer_arming_state=infer_arming_state)
    hass.data[DATA_NESS] = client

    async def _close(event):
        await client.close()

    hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, _close)

    hass.async_create_task(
        async_load_platform(hass, 'binary_sensor', DOMAIN, {CONF_ZONES: zones},
                            config))
    hass.async_create_task(
        async_load_platform(hass, 'alarm_control_panel', DOMAIN, {}, config))

    def on_zone_change(zone_id: int, state: bool):
        """Receives and propagates zone state updates."""
        async_dispatcher_send(hass, SIGNAL_ZONE_CHANGED, ZoneChangedData(
            zone_id=zone_id,
            state=state,
        ))

    def on_state_change(arming_state: ArmingState):
        """Receives and propagates arming state updates."""
        async_dispatcher_send(hass, SIGNAL_ARMING_STATE_CHANGED, arming_state)

    client.on_zone_change(on_zone_change)
    client.on_state_change(on_state_change)

    # Force update for current arming status and current zone states
    hass.loop.create_task(client.keepalive())
    hass.loop.create_task(client.update())

    async def handle_panic(call):
        await client.panic(call.data[ATTR_CODE])

    async def handle_aux(call):
        await client.aux(call.data[ATTR_OUTPUT_ID], call.data[ATTR_STATE])

    hass.services.async_register(DOMAIN, SERVICE_PANIC, handle_panic,
                                 schema=SERVICE_SCHEMA_PANIC)
    hass.services.async_register(DOMAIN, SERVICE_AUX, handle_aux,
                                 schema=SERVICE_SCHEMA_AUX)

    return True
Ejemplo n.º 3
0
async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
    """Set up the Ness Alarm platform."""

    conf = config[DOMAIN]

    zones = conf[CONF_ZONES]
    host = conf[CONF_HOST]
    port = conf[CONF_DEVICE_PORT]
    scan_interval = conf[CONF_SCAN_INTERVAL]
    infer_arming_state = conf[CONF_INFER_ARMING_STATE]

    client = Client(
        host=host,
        port=port,
        loop=hass.loop,
        update_interval=scan_interval.total_seconds(),
        infer_arming_state=infer_arming_state,
    )
    hass.data[DATA_NESS] = client

    async def _close(event):
        await client.close()

    hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, _close)

    hass.async_create_task(
        async_load_platform(hass, Platform.BINARY_SENSOR, DOMAIN,
                            {CONF_ZONES: zones}, config))
    hass.async_create_task(
        async_load_platform(hass, Platform.ALARM_CONTROL_PANEL, DOMAIN, {},
                            config))

    def on_zone_change(zone_id: int, state: bool):
        """Receives and propagates zone state updates."""
        async_dispatcher_send(hass, SIGNAL_ZONE_CHANGED,
                              ZoneChangedData(zone_id=zone_id, state=state))

    def on_state_change(arming_state: ArmingState):
        """Receives and propagates arming state updates."""
        async_dispatcher_send(hass, SIGNAL_ARMING_STATE_CHANGED, arming_state)

    client.on_zone_change(on_zone_change)
    client.on_state_change(on_state_change)

    # Force update for current arming status and current zone states
    hass.loop.create_task(client.keepalive())
    hass.loop.create_task(client.update())

    async def handle_panic(call: ServiceCall) -> None:
        await client.panic(call.data[ATTR_CODE])

    async def handle_aux(call: ServiceCall) -> None:
        await client.aux(call.data[ATTR_OUTPUT_ID], call.data[ATTR_STATE])

    hass.services.async_register(DOMAIN,
                                 SERVICE_PANIC,
                                 handle_panic,
                                 schema=SERVICE_SCHEMA_PANIC)
    hass.services.async_register(DOMAIN,
                                 SERVICE_AUX,
                                 handle_aux,
                                 schema=SERVICE_SCHEMA_AUX)

    return True
Ejemplo n.º 4
0
async def async_setup(opp, config):
    """Set up the Ness Alarm platform."""

    conf = config[DOMAIN]

    zones = conf[CONF_ZONES]
    host = conf[CONF_HOST]
    port = conf[CONF_DEVICE_PORT]
    scan_interval = conf[CONF_SCAN_INTERVAL]
    infer_arming_state = conf[CONF_INFER_ARMING_STATE]

    client = Client(
        host=host,
        port=port,
        loop=opp.loop,
        update_interval=scan_interval.total_seconds(),
        infer_arming_state=infer_arming_state,
    )
    opp.data[DATA_NESS] = client

    async def _close(event):
        await client.close()

    opp.bus.async_listen_once(EVENT_OPENPEERPOWER_STOP, _close)

    opp.async_create_task(
        async_load_platform(opp, "binary_sensor", DOMAIN, {CONF_ZONES: zones},
                            config))
    opp.async_create_task(
        async_load_platform(opp, "alarm_control_panel", DOMAIN, {}, config))

    def on_zone_change(zone_id: int, state: bool):
        """Receives and propagates zone state updates."""
        async_dispatcher_send(opp, SIGNAL_ZONE_CHANGED,
                              ZoneChangedData(zone_id=zone_id, state=state))

    def on_state_change(arming_state: ArmingState):
        """Receives and propagates arming state updates."""
        async_dispatcher_send(opp, SIGNAL_ARMING_STATE_CHANGED, arming_state)

    client.on_zone_change(on_zone_change)
    client.on_state_change(on_state_change)

    # Force update for current arming status and current zone states
    opp.loop.create_task(client.keepalive())
    opp.loop.create_task(client.update())

    async def handle_panic(call):
        await client.panic(call.data[ATTR_CODE])

    async def handle_aux(call):
        await client.aux(call.data[ATTR_OUTPUT_ID], call.data[ATTR_STATE])

    opp.services.async_register(DOMAIN,
                                SERVICE_PANIC,
                                handle_panic,
                                schema=SERVICE_SCHEMA_PANIC)
    opp.services.async_register(DOMAIN,
                                SERVICE_AUX,
                                handle_aux,
                                schema=SERVICE_SCHEMA_AUX)

    return True