def get_all_node_op_addresses_in_block(
compressed_model: NNCFNetwork,
block: BuildingBlock) -> Set[OperationAddress]:
"""
Returns set of operation addresses of all layers included in the block.
:param compressed_model: Target model.
:param block: Building blocks.
:return: Set of operation addresses for building block.
"""
graph = compressed_model.get_original_graph()
nx_graph = graph.get_nx_graph_copy()
start_node, end_node = block
start_node_key, end_node_key = None, None
#pylint: disable=protected-access
for node in nx_graph._node.values():
if start_node == str(node['node_name']):
start_node_key = node['key']
if end_node == str(node['node_name']):
end_node_key = node['key']
simple_paths = nx.all_simple_paths(nx_graph, start_node_key, end_node_key)
op_adresses = set()
for node_keys_in_path in simple_paths:
for node_key in node_keys_in_path:
op_adresses.add(
OperationAddress.from_str(
nx_graph._node[node_key]['node_name']))
start_op_address = OperationAddress.from_str(
nx_graph._node[start_node_key]['node_name'])
op_adresses.remove(start_op_address)
return op_adresses
def test_single_insertions(self, setup, target_point: PTTargetPoint):
insertion_point = PTInsertionPoint(target_point.target_type,
OperationAddress.from_str(target_point.target_node_name),
target_point.input_port_id)
if insertion_point.insertion_type in [PTInsertionType.OPERATOR_PRE_HOOK, PTInsertionType.OPERATOR_POST_HOOK]:
hook = lambda x: x
else:
hook = BaseOp(lambda x: x)
self.compressed_model.insert_at_point(insertion_point, [hook])
# pylint:disable=protected-access
if insertion_point.insertion_type == PTInsertionType.OPERATOR_PRE_HOOK:
ctx = self.compressed_model.get_tracing_context()
pre_hook_id = PreHookId(insertion_point.op_address, input_port_id=insertion_point.input_port_id)
assert ctx._pre_hooks[pre_hook_id][0] is hook
if insertion_point.insertion_type == PTInsertionType.OPERATOR_POST_HOOK:
ctx = self.compressed_model.get_tracing_context()
assert ctx._post_hooks[insertion_point.op_address][0] is hook
if insertion_point.insertion_type == PTInsertionType.NNCF_MODULE_PRE_OP:
module = self.compressed_model.get_module_by_scope(insertion_point.module_scope)
assert module.pre_ops["0"] is hook
if insertion_point.insertion_type == PTInsertionType.NNCF_MODULE_POST_OP:
module = self.compressed_model.get_module_by_scope(insertion_point.module_scope)
assert module.post_ops["0"] is hook
class TestInsertionCommands:
@pytest.fixture()
def setup(self):
self.compressed_model = NNCFNetwork(InsertionPointTestModel(),
[ModelInputInfo([1, 1, 10, 10])]) # type: NNCFNetwork
conv1_node_name = 'InsertionPointTestModel/NNCFConv2d[conv1]/conv2d_0'
point_for_conv1_weights = PTTargetPoint(target_type=TargetType.OPERATION_WITH_WEIGHTS,
target_node_name=conv1_node_name)
point_for_conv1_inputs = PTTargetPoint(target_type=TargetType.OPERATOR_PRE_HOOK,
target_node_name=conv1_node_name)
point_for_conv1_activations = PTTargetPoint(target_type=TargetType.POST_LAYER_OPERATION,
target_node_name=conv1_node_name)
conv2_node_name = 'InsertionPointTestModel/NNCFConv2d[conv2]/conv2d_0'
point_for_conv2_weights = PTTargetPoint(target_type=TargetType.OPERATION_WITH_WEIGHTS,
target_node_name=conv2_node_name)
point_for_conv2_inputs = PTTargetPoint(target_type=TargetType.OPERATOR_PRE_HOOK,
target_node_name=conv2_node_name)
point_for_conv2_activations = PTTargetPoint(target_type=TargetType.POST_LAYER_OPERATION,
target_node_name=conv2_node_name)
linear_node_name = 'InsertionPointTestModel/linear_0'
point_for_linear_weight_input = PTTargetPoint(target_type=TargetType.OPERATOR_PRE_HOOK,
target_node_name=linear_node_name, input_port_id=0)
point_for_linear_activation = PTTargetPoint(target_type=TargetType.OPERATOR_POST_HOOK,
target_node_name=linear_node_name)
relu_node_name = 'InsertionPointTestModel/ReLU[relu]/relu_0'
point_for_relu_inputs = PTTargetPoint(target_type=TargetType.OPERATOR_PRE_HOOK,
target_node_name=relu_node_name, input_port_id=0)
point_for_relu_activations = PTTargetPoint(target_type=TargetType.OPERATOR_POST_HOOK,
target_node_name=relu_node_name)
available_points = [point_for_conv1_weights,
point_for_conv2_weights,
point_for_conv1_inputs,
point_for_conv2_inputs,
point_for_conv1_activations,
point_for_conv2_activations,
point_for_linear_activation,
point_for_linear_weight_input,
point_for_relu_activations,
point_for_relu_inputs]
@pytest.mark.parametrize("target_point", available_points)
def test_single_insertions(self, setup, target_point: PTTargetPoint):
insertion_point = PTInsertionPoint(target_point.target_type,
OperationAddress.from_str(target_point.target_node_name),
target_point.input_port_id)
if insertion_point.insertion_type in [PTInsertionType.OPERATOR_PRE_HOOK, PTInsertionType.OPERATOR_POST_HOOK]:
hook = lambda x: x
else:
hook = BaseOp(lambda x: x)
self.compressed_model.insert_at_point(insertion_point, [hook])
# pylint:disable=protected-access
if insertion_point.insertion_type == PTInsertionType.OPERATOR_PRE_HOOK:
ctx = self.compressed_model.get_tracing_context()
pre_hook_id = PreHookId(insertion_point.op_address, input_port_id=insertion_point.input_port_id)
assert ctx._pre_hooks[pre_hook_id][0] is hook
if insertion_point.insertion_type == PTInsertionType.OPERATOR_POST_HOOK:
ctx = self.compressed_model.get_tracing_context()
assert ctx._post_hooks[insertion_point.op_address][0] is hook
if insertion_point.insertion_type == PTInsertionType.NNCF_MODULE_PRE_OP:
module = self.compressed_model.get_module_by_scope(insertion_point.module_scope)
assert module.pre_ops["0"] is hook
if insertion_point.insertion_type == PTInsertionType.NNCF_MODULE_POST_OP:
module = self.compressed_model.get_module_by_scope(insertion_point.module_scope)
assert module.post_ops["0"] is hook
priority_types = ["same", "different"]
insertion_types = TargetType
priority_test_cases = list(itertools.product(priority_types, insertion_types))
@staticmethod
def check_order(iterable1: List, iterable2: List, ordering: List):
for idx, order in enumerate(ordering):
assert iterable1[idx] is iterable2[order]
# pylint:disable=undefined-variable
@pytest.mark.parametrize("case", priority_test_cases, ids=[x[1].name + '-' + x[0] for x in priority_test_cases])
def test_priority(self, case, setup):
# pylint:disable=too-many-branches
priority_type = case[0]
insertion_type = case[1]
if insertion_type in [TargetType.OPERATION_WITH_WEIGHTS, TargetType.POST_LAYER_OPERATION]:
hook1 = BaseOp(lambda x: x)
hook2 = BaseOp(lambda x: 2 * x)
hook3 = BaseOp(lambda x: 3 * x)
else:
hook1 = lambda x: x
hook2 = lambda x: 2 * x
hook3 = lambda x: 3 * x
if insertion_type == TargetType.OPERATION_WITH_WEIGHTS:
point = self.point_for_conv2_weights
elif insertion_type == TargetType.POST_LAYER_OPERATION:
point = self.point_for_conv1_activations
elif insertion_type == TargetType.OPERATOR_PRE_HOOK:
point = self.point_for_linear_weight_input
elif insertion_type == TargetType.OPERATOR_POST_HOOK:
point = self.point_for_relu_activations
else:
pytest.skip("Insertion type {} currently unsupported in PT".format(insertion_type))
if priority_type == "same":
# Same-priority commands will be executed in registration order
command1 = PTInsertionCommand(point, hook1, TransformationPriority.DEFAULT_PRIORITY)
command2 = PTInsertionCommand(point, hook2, TransformationPriority.DEFAULT_PRIORITY)
command3 = PTInsertionCommand(point, hook3, TransformationPriority.DEFAULT_PRIORITY)
else:
# Prioritized commands will be executed in ascending priority order
command1 = PTInsertionCommand(point, hook1, TransformationPriority.SPARSIFICATION_PRIORITY)
command2 = PTInsertionCommand(point, hook2, TransformationPriority.QUANTIZATION_PRIORITY)
command3 = PTInsertionCommand(point, hook3, TransformationPriority.DEFAULT_PRIORITY)
layout = PTTransformationLayout()
layout.register(command1)
layout.register(command2)
layout.register(command3)
self.compressed_model = PTModelTransformer(self.compressed_model).transform(layout)
hook_list = [hook1, hook2, hook3]
if priority_type == "same":
order = [0, 1, 2]
elif priority_type == "different":
order = [2, 0, 1]
# pylint:disable=protected-access
if insertion_type == TargetType.OPERATOR_PRE_HOOK:
ctx = self.compressed_model.get_tracing_context()
pre_hook_id = PreHookId(OperationAddress.from_str(point.target_node_name),
input_port_id=point.input_port_id)
self.check_order(ctx._pre_hooks[pre_hook_id], hook_list, order)
if insertion_type == TargetType.OPERATOR_POST_HOOK:
ctx = self.compressed_model.get_tracing_context()
self.check_order(ctx._post_hooks[OperationAddress.from_str(point.target_node_name)],
hook_list, order)
if insertion_type == TargetType.OPERATION_WITH_WEIGHTS:
module = self.compressed_model.get_containing_module(point.target_node_name)
# Works because Pytorch ModuleDict is ordered
self.check_order([x.operand for x in module.pre_ops.values()], hook_list, order)
if insertion_type == TargetType.POST_LAYER_OPERATION:
module = self.compressed_model.get_containing_module(point.target_node_name)
# Works because Pytorch ModuleDict is ordered
self.check_order(list(module.post_ops.values()), hook_list, order)
def make_op_address_for_coalescing_test(scope_str: str) -> OperationAddress:
op_address = OperationAddress.from_str(scope_str)
return op_address