def loading_time():
progressbarWindow = ":_PersistentProgressDialog"
progressBarLabelBiLAX = ":LAX4ch Contour detection is in progress..._QLabel"
progressBarBiLAX = ":LAX4ch Contour detection is in progress..._QProgressBar"
start = time.time()
counter = 0
while True:
# If progress r exists, restart cycle
if object.exists(progressbarWindow) is True or object.exists(
progressBarBiLAX) is True:
pass
# test.log("NOT BAD")
else:
# If dialog exists after initial pass, restart cycle and reset counter
if object.exists(progressbarWindow) is True or object.exists(
progressBarBiLAX) is True:
pass
counter = 0
# If dialog doesn't exist for three consecutive iterations, break and time.
else:
counter += 1
if counter > 3:
break
end = time.time()
return end - start
def load_series(window_given, series_num):
series = ":scrollArea.frame-%s_SeriesThumbPreview" % (series_num - 1)
window, x, y = find_window(window_given)
# if series needed is bigger than 8, check if scrolling is needed to reach the series
if object.exists(cvi42Objects.series_scrollbar):
squish.scrollTo(squish.waitForObject(cvi42Objects.series_scrollbar),
-505)
if series_num > 8:
squish.scrollTo(
squish.waitForObject(cvi42Objects.series_scrollbar), 855)
# Load series into window requested
squish.mouseMove(squish.waitForObject(series), 5, 5)
squish.mousePress(squish.waitForObject(series))
# squish.snooze(1)
squish.mouseRelease(squish.waitForObject(window))
squish.snooze(0.2)
if object.exists(":Load Volume.Yes_QPushButton"):
squish.clickButton(
squish.waitForObject(":Load Volume.Yes_QPushButton"))
# Wait for progress bar
time = loading_time()
if time > 10:
test.log("Time to load series: %.2f" % time)
return
def check_report42():
reportTab = ":tabBar.Report_TabItem"
greenStatusbar = ":webEngView.Save in progress_HTML_Object"
reportLoading = "{container=':mCentralStack.stackWidget_QStackedWidget' name='webEndView' "
"type='QWebEngineView' visible='1'}id='loader' tagName='DIV' type='HTML_Object' visible='true'}"
feedbackMessage = ":webEngView.study-update-feeback_HTML_Object"
counter = 0
start = time.time()
# Select the Report module to check progress, wait one second to allow the system to catch up
studyFunctions.click_module("Report")
# squish.snooze(1)
# Wait for the green progress bar to disappear
while True:
if object.exists(feedbackMessage):
if object.exists(greenStatusbar) is True:
pass
else:
if object.exists(greenStatusbar) is True or object.exists(
reportLoading) is True:
pass
counter = 0
# If dialog doesn't exist for three consecutive iterations, break and time.
else:
counter += 1
if counter > 2:
break
else:
pass
counter += 1
if counter > 100:
test.log("Can't check report42")
squish.mouseClick(squish.waitForObject(reportTab))
return
end = time.time()
test.log("Added to report42 %.2f" % (end - start))
# squish.snooze(1)
return
def startCura(self):
# Get registered AUT name from conf file
suite_conf = os.path.join(squishinfo.testCase, "..", "suite.conf")
aut = None
with open(suite_conf) as file:
line = file.readline()
while line:
if line.startswith("AUT="):
aut = (line.split("AUT=")[1]).rstrip()
break
startApplication(aut)
waitForObject(names.mwi, 50000)
if object.exists(names.mwi_changelog):
self.click(names.mwi_changelog_btn_close)
def objectWithTextExists(self,
object_template,
value,
property="text",
lang=None,
exact_match=False,
pause=0):
squish.snooze(
pause /
1000.0) #Possibly we need to wait for the interface to update.
if lang is not None:
value = self.getTranslatedText(value, lang)
obj = object_template.copy()
if exact_match:
obj[property] = value
else:
obj[property] = Wildcard("*" + value + "*")
return object.exists(obj)
def close_study():
squish.activateItem(
squish.waitForObjectItem(cvi42Objects.menuBar, "Workspace"))
squish.snooze(0.5)
squish.activateItem(
squish.waitForObjectItem(cvi42Objects.workspaceButton, "Close Study"))
start = time.time()
while True:
if object.exists(cvi42Objects.patientlistEditBox) is True:
break
else:
pass
end = time.time()
test.log("Time to close study: %.2f" % (end - start))
return
def close_cvi42():
while True:
process_id = [
item.split()[1]
for item in os.popen('tasklist').read().splitlines()[4:]
if "cvi42.exe" in item.split()
]
if len(process_id) >= 1:
os.system("taskkill /im cvi42.exe")
if object.exists(cvi42Objects.QuitOkButton):
squish.clickButton(
squish.waitForObject(cvi42Objects.QuitOkButton))
else:
break
return
def anonymize_study(study, anon_name):
# If user is not in patient list page condition
if object.exists(cvi42Objects.returnPatientlistButton) is True:
squish.clickButton(
squish.waitForObject(cvi42Objects.returnPatientlistButton))
# Grabs the status bar object to check current message
status = squish.waitForObject(cvi42Objects.statusBar)
if "\\" in study:
studyUpdated = study.replace("\\", "")
else:
studyUpdated = study
# Searches for study, and anonymizes
squish.waitForObject(cvi42Objects.patientlistEditBox).setText(studyUpdated)
squish.openContextMenu(
squish.waitForObjectItem(cvi42Objects.studyTreeitem, study), 50, 5, 0)
squish.activateItem(
squish.waitForObjectItem(cvi42Objects.contextMenu, "Anonymize Study"))
squish.waitForObject(cvi42Objects.anonymizeEditBox).setText(anon_name)
squish.clickButton(squish.waitForObject(cvi42Objects.anonymizeOkButton))
start = time.time()
# squish.snooze(4)
while True:
if status.currentMessage() == "Import Study done":
break
else:
pass
end = time.time()
test.log("Anonymizing %s time: %.2f" % (study, (end - start)))
return anon_name
def delete_study(study_name):
squish.waitForObject(cvi42Objects.patientlistEditBox).setText(study_name)
squish.openContextMenu(
squish.waitForObjectItem(cvi42Objects.studyTreeitem, study_name), 50,
13, 0)
squish.activateItem(
squish.waitForObjectItem(cvi42Objects.contextMenu, "Delete Study"))
# squish.snooze(1)
squish.clickButton(squish.waitForObject(cvi42Objects.DeleteStudyOkButton))
start = time.time()
while True:
if object.exists(cvi42Objects.UpdatingStudyListMessage):
break
else:
pass
end = time.time()
# test.log("Time to delete study: %.2f" %(end-start))
squish.waitForObject(cvi42Objects.patientlistEditBox).setText("")
return
def load(study, ct=False):
studyWindow = "{text='%s' type='QAction' unnamed='1' visible='true'}" % study
# If study is already loaded condition
if object.exists(studyWindow) is True:
return
# If user is not in patient list page condition
if object.exists(cvi42Objects.returnPatientlistButton) is True:
squish.clickButton(
squish.waitForObject(cvi42Objects.returnPatientlistButton))
# Grabs the status bar object to check current message
status = squish.waitForObject(cvi42Objects.statusBar)
if "\\" in study:
studyUpdated = study.replace("\\", "")
else:
studyUpdated = study
# Search for study in patient list
squish.waitForObject(cvi42Objects.patientlistEditBox).setText(studyUpdated)
squish.doubleClick(
squish.waitForObjectItem(cvi42Objects.studyTreeitem, study), 22, 7, 0,
squish.Qt.LeftButton)
start = time.time()
if ct == False:
while True:
# Wait until 'Loading Study done' message appears on statusbar
if status.currentMessage() == "Loading Study done":
end = time.time()
test.log("Loading Study time: %.2f" % (end - start))
break
# If study already opened by another user condition
if object.exists(cvi42Objects.studyOpenWindow) is True:
squish.clickButton(
squish.waitForObject(cvi42Objects.studyOpenOK))
# If study already opened, exit patient list window
if status.currentMessage() == "Study Already Open":
squish.clickButton(
squish.waitForObject(cvi42Objects.returnStudyButton))
break
# If study already loaded, exit patient list window
if status.currentMessage() == "Study is already loaded.":
squish.clickButton(
squish.waitForObject(cvi42Objects.returnStudyButton))
break
# If indication prompt is present
if object.exists(cvi42Objects.SelectIndicationHeader) is True:
squish.doubleClick(
squish.waitForObject(cvi42Objects.NoIndicationButton))
else:
while True:
# Wait until 'Select indication is on the screen'
if object.exists(cvi42Objects.SelectIndicationHeader) is True:
end = time.time()
test.log("Loading Study time: %.2f" % (end - start))
squish.doubleClick(
squish.waitForObject(cvi42Objects.NoIndicationButton))
break
# If study already opened by another user condition
if object.exists(cvi42Objects.studyOpenWindow) is True:
squish.clickButton(
squish.waitForObject(cvi42Objects.studyOpenOK))
# If study already opened, exit patient list window
if status.currentMessage() == "Study Already Open":
squish.clickButton(
squish.waitForObject(cvi42Objects.returnStudyButton))
break
if object.exists(
":mWorkflowDockWidget.mIndicationLabel_QLabel") is True:
end = time.time()
test.log("Loading Study time: %.2f" % (end - start))
break
return
def click_module(module, ct=False):
counter = 0
moduleListItem = "{container=':mWorkflowDockWidget.protocolSteps_Workflow::ProtocolStepListWidget' text='%s' type='QModelIndex'}" % module
# If the study is MR, the icon of the selected module is available in the toolbar. Checks if module already selected
if ct == False:
if object.exists(cvi42Objects.toolbarModuleButton) is True:
if squish.waitForObject(
cvi42Objects.toolbarModuleButton).text == module:
# test.log("Module Already Loaded")
return
while True:
# If module not in the module list, search for it
if object.exists(moduleListItem) is False:
if counter == 0:
# If module list scroll bar available, mouse scroll to try and find module
if object.exists(cvi42Objects.moduleListScrollbar):
# Mouse scrolls up all the way to see top of visible module list
squish.sendEvent(
"QWheelEvent",
squish.waitForObject(cvi42Objects.moduleListScrollbar),
103, 527, 540, 0, 2)
# If module is visible, click it, and exit loop
if object.exists(moduleListItem) is True:
squish.mouseClick(squish.waitForObject(moduleListItem))
time = loading_time()
if time > 10:
test.log("Time to load module: %.2f" % time)
break
# If scroll bar available, scroll down a little bit each iteration
squish.sendEvent(
"QWheelEvent",
squish.waitForObject(cvi42Objects.moduleListScrollbar),
3, 307, -340, 0, 2)
# If mouse scroll bar not available, pass each time
else:
pass
counter += 1
# After four attempts, if module is not found, select it from the protocol list and click the module
if counter == 4:
squish.mouseClick(
squish.waitForObject(cvi42Objects.addProtocolButton))
squish.activateItem(
squish.waitForObjectItem(cvi42Objects.addProtocolWindow,
module))
squish.mouseClick(squish.waitForObject(moduleListItem))
time = loading_time()
if time > 10:
test.log("Time to load module: %.2f" % time)
return
# If module exists from the beginning, select it and exit
else:
squish.mouseClick(squish.waitForObject(moduleListItem))
time = loading_time()
if time > 10:
test.log("Time to load module: %.2f" % time)
return
return
def login(user, server):
# If cvi42 already running dialog popup
if object.exists(cvi42Objects.cviAlreadyRunning):
squish.mouseClick(squish.waitForObject(cvi42Objects.cviAlreadyRunningOk))
# If cvi42 disconnected
if object.exists(cvi42Objects.mainDialog):
if object.exists(cvi42Objects.LoginDialog) is False:
test.log("Already Logged In")
return
# Grabs desired server name
squish.mouseClick(squish.waitForObject(cvi42Objects.serverBox), 164, 7, 0, squish.Qt.LeftButton)
squish.mouseClick(squish.waitForObjectItem(cvi42Objects.serverBox, server), 105, 8, 0, squish.Qt.LeftButton)
# Populates username and password boxes and clicks login
squish.mouseClick(squish.waitForObject(cvi42Objects.usernameBox))
squish.waitForObject(cvi42Objects.usernameBox).setText(user)
squish.waitForObject(cvi42Objects.passwordBox).setText(user)
squish.clickButton(squish.waitForObject(cvi42Objects.LoginButton))
start = time.time()
start2 = time.time()
# If user already logged on dialog
if object.exists(cvi42Objects.userAlreadyLoggedOn):
squish.mouseClick(squish.waitForObject(cvi42Objects.userAlreadyLoggedOnOk))
# Benchmark splash screen measurements
splash = squish.waitForObject(cvi42Objects.splash)
message = splash.message()
counter = 0
while True:
try:
if object.exists(cvi42Objects.splash):
if message == splash.message():
pass
else:
splash_end = time.time()
test.log("Time for %s: %.2f" %(message, (splash_end-start2)))
message = splash.message()
start2 = time.time()
else:
break
except:
break
status = squish.waitForObject(cvi42Objects.statusBar);
while True:
if status.currentMessage() == "Load image previews done":
break
else:
pass
end = time.time()
test.log("Time to Login: %.2f" % (end-start))
return