def sampleapp():
appname = raw_input('Enter name of application : ')
session_config = SessionConfig(SessionConfig.SessionTransportMode.TLS) #default is TLS
if transport.lower() == "tipc" or transport == 2:
session_config = SessionConfig(SessionConfig.SessionTransportMode.TIPC)
session_config.ca_certs = root_cert_path
session_config.certfile = client_cert_path
session_config.keyfile = client_key_path
ne = NetworkElement(switchIP, appname)
con = ne.connect(username, password, session_config)
print 'Connected to host'
print "System Name: ", ne.properties.sys_name
print "System Uptime: ", ne.properties.sys_uptime
print "Total System Memory: ", ne.total_system_memory
print "Free System Memory: ", ne.free_system_memory
print "System CPU Utilization: ", ne.system_cpu_utilization, "%\n"
print "System Connect Time: ", ne.get_connect_time()
print "System Disonnect Time: ", ne.get_disconnect_time()
print "System __str__ Method: ", ne
print "Host Content String:\n", ne.properties.content_string
ne.disconnect()
def scaleNotification():
for switch in switches:
switchIP = switch[0]
appName = switch[1]
user = switch[2]
pswd = switch[3]
#
# Set up session connection configuration and connect to the switch
#
ne = NetworkElement(switchIP, appName)
if transport == 'TLS':
session_config = SessionConfig(
SessionConfig.SessionTransportMode.TLS)
session_config.ca_certs = cert
ne.connect(user, pswd, session_config)
elif transport == 'TIPC':
session_config = SessionConfig(
SessionConfig.SessionTransportMode.TIPC)
ne.connect(user, pswd, session_config)
else:
print "Please set-up a valid transport type: TIPC or TLS"
exit(0)
vty = VtyService(ne)
vty.open()
vlan_summary = vty.write("sh vlan summary")
vty.close()
vlan_sum = re.search('(?<=vlansum-all-vlan\t)(.*)', vlan_summary)
if int(vlan_sum.group(0)) > int(scale_limits["max_vlans"]):
string_print = "Vlan scale exceeded. Max vlan recommended:", scale_limits[
"max_vlans"], "vlan being used :", vlan_sum.group(0)
print string_print
ne.create_syslog_message(
ne.OnepSyslogSeverity.ONEP_SYSLOG_CRITICAL, str(string_print))
print "Disconnecting from NE: ", switchIP
ne.disconnect()
def scaleNotification():
for switch in switches:
switchIP = switch[0]
appName = switch[1]
user = switch[2]
pswd = switch[3]
#
# Set up session connection configuration and connect to the switch
#
ne = NetworkElement(switchIP, appName)
if transport == 'TLS':
session_config = SessionConfig(SessionConfig.SessionTransportMode.TLS)
session_config.ca_certs = cert
ne.connect(user, pswd, session_config)
elif transport == 'TIPC':
session_config = SessionConfig(SessionConfig.SessionTransportMode.TIPC)
ne.connect(user, pswd, session_config)
else:
print "Please set-up a valid transport type: TIPC or TLS"
exit(0)
vty = VtyService(ne)
vty.open()
vlan_summary = vty.write("sh vlan summary")
vty.close()
vlan_sum = re.search('(?<=vlansum-all-vlan\t)(.*)',vlan_summary)
if int(vlan_sum.group(0)) > int(scale_limits["max_vlans"]):
string_print = "Vlan scale exceeded. Max vlan recommended:",scale_limits["max_vlans"],"vlan being used :", vlan_sum.group(0)
print string_print
ne.create_syslog_message (ne.OnepSyslogSeverity.ONEP_SYSLOG_CRITICAL,
str(string_print));
print "Disconnecting from NE: ",switchIP
ne.disconnect()
if transport == 'TLS':
session_config = SessionConfig(SessionConfig.SessionTransportMode.TLS)
session_config.ca_certs = cert
ne.connect(user, pswd, session_config)
elif transport == 'TIPC':
session_config = SessionConfig(SessionConfig.SessionTransportMode.TIPC)
ne.connect(user, pswd, session_config)
else:
print "Please set-up a valid transport type: TIPC or TLS"
exit(0)
RX_BYTES = InterfaceStatistics.InterfaceStatisticsParameter.ONEP_IF_STAT_RX_BYTES
FILTER = InterfaceFilter(None, NetworkInterface.InterfaceTypes.ONEP_IF_TYPE_ETHERNET)
print "Getting Interface Statistics on", switchIP
intf_list_ne = ne.get_interface_list(FILTER)
for intf in intf_list_ne:
try:
int = ne.get_interface_by_name(intf.name)
int_stats = int.get_statistics()
r_bytes=int_stats.get_param(RX_BYTES)
if r_bytes > 0:
print "Interface",intf.name,"RX_BYTES",r_bytes
except:
continue
ne.disconnect();
# user - switch userID
pswd = "<pswd>"
logMsg = "syslog generated by onePK"
#####################################################################
#
# Set up session connection configuration and connect to the switch
#
ne = NetworkElement(switchIP, appName)
if transport == 'TLS':
session_config = SessionConfig(SessionConfig.SessionTransportMode.TLS)
session_config.ca_certs = cert
ne.connect(user, pswd, session_config)
elif transport == 'TIPC':
session_config = SessionConfig(SessionConfig.SessionTransportMode.TIPC)
ne.connect(user, pswd)
else:
print "Please set-up a valid transport type: TIPC or TLS"
exit(0)
#
# Create the syslog messange and disconnect from the device
#
print "Generating Syslog message."
ne.create_syslog_message(ne.OnepSyslogSeverity.ONEP_SYSLOG_CRITICAL, logMsg)
print "Check on switch logs using \"sh log log duration 00:05:00\" cli"
print "Disconnecting from device: ", switchIP
ne.disconnect()
# user - switch userID
pswd = "<pswd>"
logMsg = "syslog generated by onePK"
#####################################################################
#
# Set up session connection configuration and connect to the switch
#
ne = NetworkElement(switchIP, appName)
if transport == 'TLS':
session_config = SessionConfig(SessionConfig.SessionTransportMode.TLS)
session_config.ca_certs = cert
ne.connect(user, pswd, session_config)
elif transport == 'TIPC':
session_config = SessionConfig(SessionConfig.SessionTransportMode.TIPC)
ne.connect(user, pswd)
else:
print "Please set-up a valid transport type: TIPC or TLS"
exit(0)
#
# Create the syslog messange and disconnect from the device
#
print "Generating Syslog message."
ne.create_syslog_message(ne.OnepSyslogSeverity.ONEP_SYSLOG_CRITICAL, logMsg);
print "Check on switch logs using \"sh log log duration 00:05:00\" cli"
print "Disconnecting from device: ", switchIP
ne.disconnect()
else:
print "You have to specify a victim (-u)"
sys.exit()
password = getpass.getpass("Please enter your password: "******"Prank Listener")
cliFilter = CLIFilter(command)
clientData = None
eventHandle = router.add_cli_listener(cliListener, cliFilter, clientData)
print "-----"
print router
print "-----"
print "Waiting for command: " + command
try:
print "-----"
wait_for_it = raw_input("Type a key to exit script")
router.remove_cli_listener(eventHandle)
router.disconnect()
except KeyboardInterrupt:
router.remove_cli_listener(eventHandle)
router.disconnect()
