def __init__(self, rect, parent=None):
QtGui.QGraphicsRectItem.__init__(self, rect, parent)
self.__resizing = False
self.__handlePoly = QtGui.QPolygonF([
QtCore.QPointF(0, -self.__handleSize),
QtCore.QPointF(0, 0),
QtCore.QPointF(-self.__handleSize, 0)
])
self.setFlag(QtGui.QGraphicsItem.ItemStacksBehindParent)
# -- handle --
self.__handlePos = QtCore.QPointF(0, 0)
# -- header --
self.__headerContentRect = None
self.__headerRect = None
# -- color --
self.__color = None
self.__darkerColor = None
self.__shadowColor = None
self.setColor(self.__defaultColor.darker(110))
# -- optionnal cosmetics --
if safeEffects:
fx = QtGui.QGraphicsDropShadowEffect()
fx.setOffset(2, 2)
fx.setBlurRadius(5)
self.setGraphicsEffect(fx)
def get_selection_center(self, selection=None):
""" """
items = None
if selection: items = selection
else: items = self.get_selected_items()
l = len(items)
if (l == 0): return QtCore.QPointF(30, 30)
sx = sum((i.pos().x() for i in items))
sy = sum((i.pos().y() for i in items))
return QtCore.QPointF(float(sx) / l, float(sy) / l)
def paint(self, painter, paintOptions, widget):
myRect = self.boundingRect()
painter.fillRect(self.__headerRect, self.__darkerColor)
gradTop = self.__headerRect.bottomLeft()
gradBot = gradTop + QtCore.QPointF(0, 4)
gradient = QtGui.QLinearGradient(gradTop, gradBot)
gradient.setColorAt(0, self.__shadowColor)
gradient.setColorAt(1, self.__color)
brush = QtGui.QBrush(gradient)
bottomRect = myRect.adjusted(0, self.__headerRect.bottom(), 0, 0)
painter.fillRect(bottomRect, brush)
if not safeEffects:
oldPen = painter.pen()
pen = QtGui.QPen()
pen.setColor(QtGui.QColor(10, 10, 10, 100))
pen.setWidth(1)
painter.setPen(pen)
painter.drawRect(myRect.adjusted(0.5, 0.5, -0.5, -0.5))
painter.setPen(oldPen)
painter.setBrush(QtGui.QBrush(self.__darkerColor))
painter.drawConvexPolygon(self.__handlePoly)
def __init__(self, edge=None, graph=None, src=None, dst=None):
Element.__init__(self, edge, graph)
self.setFlag(QtGui.QGraphicsItem.ItemIsSelectable)
self.setZValue(0.5)
self.srcPoint = QtCore.QPointF()
self.dstPoint = QtCore.QPointF()
self.__edge_creator = self.set_edge_creator(edgefactory.LinearEdgePath())
self.setPen(QtGui.QPen(QtCore.Qt.black, 2,
QtCore.Qt.SolidLine,
QtCore.Qt.RoundCap,
QtCore.Qt.RoundJoin))
self.dstBBox = self.srcBBox = None
if src is not None: self.set_observed_source(src)
if dst is not None: self.set_observed_destination(dst)
self.setPath(self.__edge_creator.get_path(self.srcPoint, self.dstPoint))
def setPos(self, pos):
offset = pos + QtCore.QPointF(self._x1, self._y1)
innerOffset = QtCore.QPointF(self._ix1, self._iy1)
items = self.visibleItems()
selfWidth = self.boundingRect(force=False).width()
for it in items:
itRect = it.boundingRect()
if self._center:
offset.setX(pos.x() + (selfWidth - itRect.width()) / 2.)
it.setPos(offset)
offset += QtCore.QPointF(0., itRect.height()) + innerOffset
if self._final and self._final.isVisible():
if self._center:
offset.setX(pos.x() +
(selfWidth - self._final.boundingRect().width()) /
2.)
self._final.setPos(offset)
def shape(self):
path = QtGui.QPainterPath()
# Enlarge selection zone
diff = self.p2 - self.p1
if (abs(diff.x()) > abs(diff.y())):
dp = QtCore.QPointF(0, 10)
else:
dp = QtCore.QPointF(10, 0)
p1 = self.p1 - dp
p2 = self.p1 + dp
p3 = self.p2 + dp
p4 = self.p2 - dp
poly = QtGui.QPolygonF([p1, p2, p3, p4])
path.addPolygon(poly)
return path
def get_path(self, p1, p2):
self.p1 = p1
self.p2 = p2
path = QtGui.QPainterPath(self.p1)
sd = self.p2 - self.p1
if abs(sd.x()) <= self.WIDTH: # draw a line
path.lineTo(self.p2)
elif sd.y() < self.WIDTH:
py = QtCore.QPointF(0, max(self.WIDTH, -sd.y()))
path.cubicTo(self.p1 + py, self.p2 - py, self.p2)
else:
py = QtCore.QPointF(0, sd.y() / 2.)
pm = (self.p1 + self.p2) / 2.
path.quadTo(self.p1 + py, pm)
path.quadTo(self.p2 - py, self.p2)
return path
def add_control(self, control, pos=None):
widget = qt_editor(control, 'large')
if widget:
if pos is None:
pos = QtCore.QPointF(0, 0)
item = WidgetItem(widget, pos, control.name)
item.set_mode(self._mode)
self.witems.append(item)
self.addItem(item)
def get_path(self, p1, p2):
self.p1 = p1
self.p2 = p2
path = QtGui.QPainterPath(self.p1)
points = []
sd = self.p2 - self.p1
if abs(sd.x()) <= self.WIDTH: # draw a line
pass
elif sd.y() < 2 * self.WIDTH:
s1 = self.p1 + QtCore.QPointF(0, self.WIDTH)
d1 = self.p2 - QtCore.QPointF(0, self.WIDTH)
s1d1 = d1 - s1
s2 = s1 + QtCore.QPointF(s1d1.x() / 2., 0)
d2 = s2 + QtCore.QPointF(0, s1d1.y())
points.extend([s1, s2, d2, d1])
else:
s1 = self.p1 + QtCore.QPointF(0, sd.y() / 2.)
d1 = self.p2 - QtCore.QPointF(0, sd.y() / 2.)
points.extend([s1, d1])
points.append(self.p2)
for pt in points:
path.lineTo(pt)
return path
def itemChange(self, change, value):
""" Used mainly to capture position changes from the QGraphicsScene
and store it in the model so that it can be saved. """
sc = self.scene()
if sc:
sc.invalidate()
if change == QtGui.QGraphicsItem.ItemVisibleHasChanged:
self.notify_position_change()
elif change == qtutils.ItemPositionHasChanged:
self.deaf(True)
point = QtCore.QPointF(from_qvariant(value))
self.store_view_data(position=[point.x(), point.y()])
self.deaf(False)
self.notify_position_change()
return value
def __init__(self):
self.p1 = QtCore.QPointF()
self.p2 = QtCore.QPointF()
def position_changed(self, *args):
"""Updates the item's **graphical** position from
model notifications. """
point = QtCore.QPointF(args[0], args[1])
self.setPos(point)
def __init__(self, srcPoint, graph):
Edge.__init__(self, None, graph, None, None)
self.srcPoint = QtCore.QPointF(*srcPoint)
self.dstPoint = QtCore.QPointF(self.srcPoint)
def update_line_destination(self, *pos):
self.dstPoint = QtCore.QPointF(*pos)
path = self.__edge_creator.get_path(self.srcPoint, self.dstPoint)
self.setPath(path)
def refreshGeometry(self):
rect = self.__layout.boundingRect(force=True)
self.__layout.setPos(QtCore.QPointF(0., 0.))
self.setRect(rect)