def evaluate_model(site_params, rup_params, df, npts, azimuth, moveout, mod, imt): sx = SitesContext() rx = RuptureContext() dx = DistancesContext() # TODO: some site parameters can be pulled from the dataframe so we don't # have to use the defaults (vs30, azimuth, etc.) if not moveout: npts = df.shape[0] for param in site_params.keys(): setattr(sx, param, np.full(npts, site_params[param])) rx.__dict__.update(rup_params) rx.mag = df['EarthquakeMagnitude'].iloc[0] rx.hypo_depth = df['EarthquakeDepth'].iloc[0] if moveout: dx.rjb = np.linspace(0, df['JoynerBooreDistance'].max(), npts) dx.rrup = np.sqrt(dx.rjb**2 + df['EarthquakeDepth'].iloc[0]**2) dx.rhypo = dx.rrup dx.repi = dx.rjb else: dx.rjb = df['JoynerBooreDistance'] dx.rrup = df['RuptureDistance'] dx.rhypo = df['HypocentralDistance'] dx.repi = df['EpicentralDistance'] # TODO: some of these distances can be pulled from the dataframe dx.ry0 = dx.rjb dx.rx = np.full_like(dx.rjb, -1) dx.azimuth = np.full_like(npts, azimuth) dx.rcdpp = dx.rjb dx.rvolc = dx.rjb try: mean, sd = MODELS_DICT[mod]().get_mean_and_stddevs( sx, rx, dx, manage_imts(imt)[0], [StdDev.TOTAL]) mean = convert_units(mean, imt) if moveout: return mean, dx else: return mean, sd[0] except Exception: return
def get_extent(rupture=None, config=None): """ Method to compute map extent from rupture. There are numerous methods for getting the extent: - It can be specified directly in the config file, - it can be hard coded for specific magnitude ranges in the config file, or - it can be based on the MultiGMPE for the event. All methods except for the first requires a rupture object. If no config is provided then a rupture is required and the extent is based on a generic set of active/stable. Args: rupture (Rupture): A ShakeMap Rupture instance. config (ConfigObj): ShakeMap config object. Returns: tuple: lonmin, lonmax, latmin, latmax rounded to the nearest arc-minute.. """ # ------------------------------------------------------------------------- # Check to see what parameters are specified in the extent config # ------------------------------------------------------------------------- spans = {} bounds = [] if config is not None: if 'extent' in config: if 'magnitude_spans' in config['extent']: if len(config['extent']['magnitude_spans']): if isinstance(config['extent']['magnitude_spans'], dict): spans = config['extent']['magnitude_spans'] if 'bounds' in config['extent']: if 'extent' in config['extent']['bounds']: if config['extent']['bounds']['extent'][0] != -999.0: bounds = config['extent']['bounds']['extent'] # ------------------------------------------------------------------------- # Simplest option: extent was specified in the config, use that and exit. # ------------------------------------------------------------------------- if len(bounds): xmin, ymin, xmax, ymax = bounds return (xmin, xmax, ymin, ymax) if not rupture or not isinstance(rupture, Rupture): raise TypeError('get_extent() requires a rupture object if the extent ' 'is not specified in the config object.') # Find the central point origin = rupture.getOrigin() if isinstance(rupture, (QuadRupture, EdgeRupture)): # For an extended rupture, it is the midpoint between the extent of the # verticies lats = rupture.lats lons = rupture.lons # Remove nans lons = lons[~np.isnan(lons)] lats = lats[~np.isnan(lats)] clat = 0.5 * (np.nanmax(lats) + np.nanmin(lats)) clon = 0.5 * (np.nanmax(lons) + np.nanmin(lons)) else: # For a point source, it is just the epicenter clat = origin.lat clon = origin.lon mag = origin.mag # ------------------------------------------------------------------------- # Second simplest option: spans are hardcoded based on magnitude # ------------------------------------------------------------------------- if len(spans): xmin = None xmax = None ymin = None ymax = None for spankey, span in spans.items(): if mag > span[0] and mag <= span[1]: ymin = clat - span[2] / 2 ymax = clat + span[2] / 2 xmin = clon - span[3] / 2 xmax = clon + span[3] / 2 break if xmin is not None: return (xmin, xmax, ymin, ymax) # ------------------------------------------------------------------------- # Use MultiGMPE to get spans # ------------------------------------------------------------------------- if config is not None: gmpe = MultiGMPE.from_config(config) gmice = get_object_from_config('gmice', 'modeling', config) else: # Put in some default values for conf config = { 'extent': { 'mmi': { 'threshold': 4.5, 'mindist': 100, 'maxdist': 1000 } } } # Generic GMPEs choices based only on active vs stable # as defaults... stable = is_stable(origin.lon, origin.lat) if not stable: ASK14 = AbrahamsonEtAl2014() CB14 = CampbellBozorgnia2014() CY14 = ChiouYoungs2014() gmpes = [ASK14, CB14, CY14] site_gmpes = None weights = [1 / 3.0, 1 / 3.0, 1 / 3.0] gmice = WGRW12() else: Fea96 = FrankelEtAl1996MwNSHMP2008() Tea97 = ToroEtAl1997MwNSHMP2008() Sea02 = SilvaEtAl2002MwNSHMP2008() C03 = Campbell2003MwNSHMP2008() TP05 = TavakoliPezeshk2005MwNSHMP2008() AB06p = AtkinsonBoore2006Modified2011() Pea11 = PezeshkEtAl2011() Atk08p = Atkinson2008prime() Sea01 = SomervilleEtAl2001NSHMP2008() gmpes = [ Fea96, Tea97, Sea02, C03, TP05, AB06p, Pea11, Atk08p, Sea01 ] site_gmpes = [AB06p] weights = [0.16, 0.0, 0.0, 0.17, 0.17, 0.3, 0.2, 0.0, 0.0] gmice = AK07() gmpe = MultiGMPE.from_list(gmpes, weights, default_gmpes_for_site=site_gmpes) min_mmi = config['extent']['mmi']['threshold'] default_imt = imt.SA(1.0) sd_types = [const.StdDev.TOTAL] # Distance context dx = DistancesContext() # This imposes minimum/ maximum distances of: # 80 and 800 km; could make this configurable d_min = config['extent']['mmi']['mindist'] d_max = config['extent']['mmi']['maxdist'] dx.rjb = np.logspace(np.log10(d_min), np.log10(d_max), 2000) # Details don't matter for this; assuming vertical surface rupturing fault # with epicenter at the surface. dx.rrup = dx.rjb dx.rhypo = dx.rjb dx.repi = dx.rjb dx.rx = np.zeros_like(dx.rjb) dx.ry0 = np.zeros_like(dx.rjb) dx.rvolc = np.zeros_like(dx.rjb) # Sites context sx = SitesContext() # Set to soft soil conditions sx.vs30 = np.full_like(dx.rjb, 180) sx = MultiGMPE.set_sites_depth_parameters(sx, gmpe) sx.vs30measured = np.full_like(sx.vs30, False, dtype=bool) sx = Sites._addDepthParameters(sx) sx.backarc = np.full_like(sx.vs30, False, dtype=bool) # Rupture context rx = RuptureContext() rx.mag = origin.mag rx.rake = 0.0 # From WC94... rx.width = 10**(-0.76 + 0.27 * rx.mag) rx.dip = 90.0 rx.ztor = origin.depth rx.hypo_depth = origin.depth gmpe_imt_mean, _ = gmpe.get_mean_and_stddevs(sx, rx, dx, default_imt, sd_types) # Convert to MMI gmpe_to_mmi, _ = gmice.getMIfromGM(gmpe_imt_mean, default_imt) # Minimum distance that exceeds threshold MMI? dists_exceed_mmi = dx.rjb[gmpe_to_mmi > min_mmi] if len(dists_exceed_mmi): mindist_km = np.max(dists_exceed_mmi) else: mindist_km = d_min # Get a projection proj = OrthographicProjection(clon - 4, clon + 4, clat + 4, clat - 4) if isinstance(rupture, (QuadRupture, EdgeRupture)): ruptx, rupty = proj(lons, lats) else: ruptx, rupty = proj(clon, clat) xmin = np.nanmin(ruptx) - mindist_km ymin = np.nanmin(rupty) - mindist_km xmax = np.nanmax(ruptx) + mindist_km ymax = np.nanmax(rupty) + mindist_km # Put a limit on range of aspect ratio dx = xmax - xmin dy = ymax - ymin ar = dy / dx if ar > 1.2: # Inflate x dx_target = dy / 1.2 ddx = dx_target - dx xmax = xmax + ddx / 2 xmin = xmin - ddx / 2 if ar < 0.83: # Inflate y dy_target = dx * 0.83 ddy = dy_target - dy ymax = ymax + ddy / 2 ymin = ymin - ddy / 2 lonmin, latmin = proj(np.array([xmin]), np.array([ymin]), reverse=True) lonmax, latmax = proj(np.array([xmax]), np.array([ymax]), reverse=True) # # Round coordinates to the nearest minute -- that should make the # output grid register with common grid resolutions (60c, 30c, # 15c, 7.5c) # logging.debug("Extent: %f, %f, %f, %f" % (lonmin, lonmax, latmin, latmax)) return _round_coord(lonmin[0]), _round_coord(lonmax[0]), \ _round_coord(latmin[0]), _round_coord(latmax[0])
def _get_extent_from_multigmpe(rupture, config=None): """ Use MultiGMPE to determine extent """ (clon, clat) = _rupture_center(rupture) origin = rupture.getOrigin() if config is not None: gmpe = MultiGMPE.from_config(config) gmice = get_object_from_config('gmice', 'modeling', config) if imt.SA in gmice.DEFINED_FOR_INTENSITY_MEASURE_TYPES: default_imt = imt.SA(1.0) elif imt.PGV in gmice.DEFINED_FOR_INTENSITY_MEASURE_TYPES: default_imt = imt.PGV() else: default_imt = imt.PGA() else: # Put in some default values for conf config = { 'extent': { 'mmi': { 'threshold': 4.5, 'mindist': 100, 'maxdist': 1000 } } } # Generic GMPEs choices based only on active vs stable # as defaults... stable = is_stable(origin.lon, origin.lat) if not stable: ASK14 = AbrahamsonEtAl2014() CB14 = CampbellBozorgnia2014() CY14 = ChiouYoungs2014() gmpes = [ASK14, CB14, CY14] site_gmpes = None weights = [1/3.0, 1/3.0, 1/3.0] gmice = WGRW12() else: Fea96 = FrankelEtAl1996MwNSHMP2008() Tea97 = ToroEtAl1997MwNSHMP2008() Sea02 = SilvaEtAl2002MwNSHMP2008() C03 = Campbell2003MwNSHMP2008() TP05 = TavakoliPezeshk2005MwNSHMP2008() AB06p = AtkinsonBoore2006Modified2011() Pea11 = PezeshkEtAl2011() Atk08p = Atkinson2008prime() Sea01 = SomervilleEtAl2001NSHMP2008() gmpes = [Fea96, Tea97, Sea02, C03, TP05, AB06p, Pea11, Atk08p, Sea01] site_gmpes = [AB06p] weights = [0.16, 0.0, 0.0, 0.17, 0.17, 0.3, 0.2, 0.0, 0.0] gmice = AK07() gmpe = MultiGMPE.from_list( gmpes, weights, default_gmpes_for_site=site_gmpes) default_imt = imt.SA(1.0) min_mmi = config['extent']['mmi']['threshold'] sd_types = [const.StdDev.TOTAL] # Distance context dx = DistancesContext() # This imposes minimum/ maximum distances of: # 80 and 800 km; could make this configurable d_min = config['extent']['mmi']['mindist'] d_max = config['extent']['mmi']['maxdist'] dx.rjb = np.logspace(np.log10(d_min), np.log10(d_max), 2000) # Details don't matter for this; assuming vertical surface rupturing fault # with epicenter at the surface. dx.rrup = dx.rjb dx.rhypo = dx.rjb dx.repi = dx.rjb dx.rx = np.zeros_like(dx.rjb) dx.ry0 = np.zeros_like(dx.rjb) dx.rvolc = np.zeros_like(dx.rjb) # Sites context sx = SitesContext() # Set to soft soil conditions sx.vs30 = np.full_like(dx.rjb, 180) sx = MultiGMPE.set_sites_depth_parameters(sx, gmpe) sx.vs30measured = np.full_like(sx.vs30, False, dtype=bool) sx = Sites._addDepthParameters(sx) sx.backarc = np.full_like(sx.vs30, False, dtype=bool) # Rupture context rx = RuptureContext() rx.mag = origin.mag rx.rake = 0.0 # From WC94... rx.width = 10**(-0.76 + 0.27*rx.mag) rx.dip = 90.0 rx.ztor = origin.depth rx.hypo_depth = origin.depth gmpe_imt_mean, _ = gmpe.get_mean_and_stddevs( sx, rx, dx, default_imt, sd_types) # Convert to MMI gmpe_to_mmi, _ = gmice.getMIfromGM(gmpe_imt_mean, default_imt) # Minimum distance that exceeds threshold MMI? dists_exceed_mmi = dx.rjb[gmpe_to_mmi > min_mmi] if len(dists_exceed_mmi): mindist_km = np.max(dists_exceed_mmi) else: mindist_km = d_min # Get a projection proj = OrthographicProjection(clon - 4, clon + 4, clat + 4, clat - 4) if isinstance(rupture, (QuadRupture, EdgeRupture)): ruptx, rupty = proj( rupture.lons[~np.isnan(rupture.lons)], rupture.lats[~np.isnan(rupture.lats)] ) else: ruptx, rupty = proj(clon, clat) xmin = np.nanmin(ruptx) - mindist_km ymin = np.nanmin(rupty) - mindist_km xmax = np.nanmax(ruptx) + mindist_km ymax = np.nanmax(rupty) + mindist_km # Put a limit on range of aspect ratio dx = xmax - xmin dy = ymax - ymin ar = dy / dx if ar > 1.2: # Inflate x dx_target = dy / 1.2 ddx = dx_target - dx xmax = xmax + ddx / 2 xmin = xmin - ddx / 2 if ar < 0.83: # Inflate y dy_target = dx * 0.83 ddy = dy_target - dy ymax = ymax + ddy / 2 ymin = ymin - ddy / 2 lonmin, latmin = proj(np.array([xmin]), np.array([ymin]), reverse=True) lonmax, latmax = proj(np.array([xmax]), np.array([ymax]), reverse=True) # # Round coordinates to the nearest minute -- that should make the # output grid register with common grid resolutions (60c, 30c, # 15c, 7.5c) # logging.debug("Extent: %f, %f, %f, %f" % (lonmin, lonmax, latmin, latmax)) return _round_coord(lonmin[0]), _round_coord(lonmax[0]), \ _round_coord(latmin[0]), _round_coord(latmax[0])