def test1(self):
site1_pga_poe_expected = [0.0639157, 0.03320212, 0.02145989]
site2_pga_poe_expected = [0.06406232, 0.02965879, 0.01864331]
site1_pgd_poe_expected = [0.16146619, 0.1336553]
site2_pgd_poe_expected = [0.15445961, 0.13437589]
curves = hazard_curves_poissonian(self.sources, self.sites, self.imts,
self.time_span, self.gsims,
self.truncation_level)
self.assertIsInstance(curves, dict)
self.assertEqual(set(curves.keys()), set([imt.PGA(), imt.PGD()]))
pga_curves = curves[imt.PGA()]
self.assertIsInstance(pga_curves, numpy.ndarray)
self.assertEqual(pga_curves.shape, (2, 3)) # two sites, three IMLs
site1_pga_poe, site2_pga_poe = pga_curves
self.assertTrue(numpy.allclose(site1_pga_poe, site1_pga_poe_expected),
str(site1_pga_poe))
self.assertTrue(numpy.allclose(site2_pga_poe, site2_pga_poe_expected),
str(site2_pga_poe))
pgd_curves = curves[imt.PGD()]
self.assertIsInstance(pgd_curves, numpy.ndarray)
self.assertEqual(pgd_curves.shape, (2, 2)) # two sites, two IMLs
site1_pgd_poe, site2_pgd_poe = pgd_curves
self.assertTrue(numpy.allclose(site1_pgd_poe, site1_pgd_poe_expected),
str(site1_pgd_poe))
self.assertTrue(numpy.allclose(site2_pgd_poe, site2_pgd_poe_expected),
str(site2_pgd_poe))
def test_retreival_tables_good_no_interp(self):
"""
Tests the retreival of the IML tables for 'good' conditions without
applying magnitude interpolations
"""
gsim = GMPETable(gmpe_table=self.TABLE_FILE)
# PGA
np.testing.assert_array_almost_equal(
gsim._return_tables(6.0, imt_module.PGA(), "IMLs"),
np.array([2., 1., 0.5]))
# PGV
np.testing.assert_array_almost_equal(
gsim._return_tables(6.0, imt_module.PGV(), "IMLs"),
np.array([20., 10., 5.]), 5)
# SA(1.0)
np.testing.assert_array_almost_equal(
gsim._return_tables(6.0, imt_module.SA(1.0), "IMLs"),
np.array([2.0, 1., 0.5]))
# Also for standard deviations
np.testing.assert_array_almost_equal(
gsim._return_tables(6.0, imt_module.PGA(), "Total"),
0.5 * np.ones(3))
np.testing.assert_array_almost_equal(
gsim._return_tables(6.0, imt_module.SA(1.0), "Total"),
0.8 * np.ones(3))
def test_get_mean_and_stddevs_good(self):
"""
Tests the full execution of the GMPE tables for valid data
"""
gsim = GMPETable(gmpe_table=self.TABLE_FILE)
ctx = RuptureContext()
ctx.mag = 6.0
# Test values at the given distances and those outside range
ctx.rjb = np.array([0.5, 1.0, 10.0, 100.0, 500.0])
ctx.vs30 = 1000. * np.ones(5)
ctx.sids = np.arange(5)
stddevs = [const.StdDev.TOTAL]
expected_mean = np.array([2.0, 2.0, 1.0, 0.5, 1.0E-20])
expected_sigma = 0.25 * np.ones(5)
imts = [imt_module.PGA(), imt_module.SA(1.0), imt_module.PGV()]
# PGA
mean, sigma = gsim.get_mean_and_stddevs(ctx, ctx, ctx, imts[0],
stddevs)
np.testing.assert_array_almost_equal(np.exp(mean), expected_mean, 5)
np.testing.assert_array_almost_equal(sigma[0], expected_sigma, 5)
# SA
mean, sigma = gsim.get_mean_and_stddevs(ctx, ctx, ctx, imts[1],
stddevs)
np.testing.assert_array_almost_equal(np.exp(mean), expected_mean, 5)
np.testing.assert_array_almost_equal(sigma[0], 0.4 * np.ones(5), 5)
# PGV
mean, sigma = gsim.get_mean_and_stddevs(ctx, ctx, ctx, imts[2],
stddevs)
np.testing.assert_array_almost_equal(np.exp(mean), 10. * expected_mean,
5)
np.testing.assert_array_almost_equal(sigma[0], expected_sigma, 5)
# StdDev.ALL check
contexts.get_mean_stds([gsim], ctx, imts)
def test_get_mean_and_stddevs(self):
"""
Tests mean and standard deviations without amplification
"""
gsim = GMPETable(gmpe_table=self.TABLE_FILE)
rctx = RuptureContext()
rctx.mag = 6.0
dctx = DistancesContext()
# Test values at the given distances and those outside range
dctx.rjb = np.array([0.5, 1.0, 10.0, 100.0, 500.0])
sctx = SitesContext()
stddevs = [const.StdDev.TOTAL]
expected_mean = np.array([2.0, 2.0, 1.0, 0.5, 1.0E-20])
# PGA
mean, sigma = gsim.get_mean_and_stddevs(sctx, rctx, dctx,
imt_module.PGA(), stddevs)
np.testing.assert_array_almost_equal(np.exp(mean), expected_mean, 5)
np.testing.assert_array_almost_equal(sigma[0], 0.5 * np.ones(5), 5)
# SA
mean, sigma = gsim.get_mean_and_stddevs(sctx, rctx, dctx,
imt_module.SA(1.0), stddevs)
np.testing.assert_array_almost_equal(np.exp(mean), expected_mean, 5)
np.testing.assert_array_almost_equal(sigma[0], 0.8 * np.ones(5), 5)
# PGV
mean, sigma = gsim.get_mean_and_stddevs(sctx, rctx, dctx,
imt_module.PGV(), stddevs)
np.testing.assert_array_almost_equal(np.exp(mean), 10. * expected_mean,
5)
np.testing.assert_array_almost_equal(sigma[0], 0.5 * np.ones(5), 5)
def test_get_mean_and_stddevs_good_amplified(self):
"""
Tests the full execution of the GMPE tables for valid data with
amplification
"""
gsim = GMPETable(gmpe_table=self.TABLE_FILE)
rctx = RuptureContext()
rctx.mag = 6.0
dctx = DistancesContext()
# Test values at the given distances and those outside range
dctx.rjb = np.array([0.5, 1.0, 10.0, 100.0, 500.0])
sctx = SitesContext()
sctx.vs30 = 100. * np.ones(5)
stddevs = [const.StdDev.TOTAL]
expected_mean = np.array([20., 20., 10., 5., 1.0E-19])
expected_sigma = 0.25 * np.ones(5)
# PGA
mean, sigma = gsim.get_mean_and_stddevs(sctx, rctx, dctx,
imt_module.PGA(), stddevs)
np.testing.assert_array_almost_equal(np.exp(mean), expected_mean, 5)
np.testing.assert_array_almost_equal(sigma[0], expected_sigma, 5)
# SA
mean, sigma = gsim.get_mean_and_stddevs(sctx, rctx, dctx,
imt_module.SA(1.0), stddevs)
np.testing.assert_array_almost_equal(np.exp(mean), expected_mean, 5)
np.testing.assert_array_almost_equal(sigma[0], 0.4 * np.ones(5), 5)
def test_get_mean_table(self, idx=0):
"""
Test the retrieval of the mean amplification tables for a given
magnitude and IMT
"""
rctx = RuptureContext()
rctx.mag = 6.0
# PGA
expected_table = np.ones([10, 2])
expected_table[:, self.IDX] *= 1.5
np.testing.assert_array_almost_equal(
self.amp_table.get_mean_table(imt_module.PGA(), rctx),
expected_table)
# SA
expected_table[:, self.IDX] = 2.0 * np.ones(10)
np.testing.assert_array_almost_equal(
self.amp_table.get_mean_table(imt_module.SA(0.5), rctx),
expected_table)
# SA (period interpolation)
interpolator = interp1d(np.log10(self.amp_table.periods),
np.log10(np.array([1.5, 2.0, 0.5])))
period = 0.3
expected_table[:, self.IDX] = (10.0**interpolator(
np.log10(period))) * np.ones(10.)
np.testing.assert_array_almost_equal(
self.amp_table.get_mean_table(imt_module.SA(period), rctx),
expected_table)
def test_get_amplification_factors(self):
"""
Tests the amplification tables
"""
ctx = RuptureContext()
ctx.rake = 45.0
ctx.mag = 6.0
# Takes distances at the values found in the table (not checking
# distance interpolation)
ctx.rjb = np.copy(self.amp_table.distances[:, 0, 0])
# Test Vs30 is 700.0 m/s midpoint between the 400 m/s and 1000 m/s
# specified in the table
stddevs = [const.StdDev.TOTAL]
expected_mean = np.ones_like(ctx.rjb)
# Check PGA and PGV
mean_amp, sigma_amp = self.amp_table.get_amplification_factors(
imt_module.PGA(), ctx, ctx.rjb, stddevs)
np.testing.assert_array_almost_equal(
mean_amp,
midpoint(1.0, 1.5) * expected_mean)
np.testing.assert_array_almost_equal(sigma_amp[0], 0.9 * expected_mean)
mean_amp, sigma_amp = self.amp_table.get_amplification_factors(
imt_module.PGV(), ctx, ctx.rjb, stddevs)
np.testing.assert_array_almost_equal(
mean_amp,
midpoint(1.0, 0.5) * expected_mean)
np.testing.assert_array_almost_equal(sigma_amp[0], 0.9 * expected_mean)
# Sa (0.5)
mean_amp, sigma_amp = self.amp_table.get_amplification_factors(
imt_module.SA(0.5), ctx, ctx.rjb, stddevs)
np.testing.assert_array_almost_equal(
mean_amp,
midpoint(1.0, 2.0) * expected_mean)
np.testing.assert_array_almost_equal(sigma_amp[0], 0.9 * expected_mean)
def test_retreival_tables_outside_mag_range(self):
"""
Tests that an error is raised when inputting a magnitude value
outside the supported range
"""
gsim = GMPETable(gmpe_table=self.TABLE_FILE)
with self.assertRaises(ValueError) as ve:
gsim._return_tables(7.5, imt_module.PGA(), "IMLs")
self.assertEqual(
str(ve.exception),
"Magnitude 7.50 outside of supported range (5.00 to 7.00)")
def test_calculation_mean(self):
DATA_FILE = data / "AMERI2017/A17_Rjb_Homoscedastic_MEAN.csv"
stddev_types = [const.StdDev.TOTAL] # Unused here
sctx = gsim.base.SitesContext()
rctx = gsim.base.RuptureContext()
dctx = gsim.base.DistancesContext()
with open(DATA_FILE, 'r') as f:
# Read periods from header:
header = f.readline()
periods = header.strip().split(',')[7:] # Periods in s.
for line in f:
arr_str = line.strip().split(',')
arr_str[
5] = "9999" # Replace result_type string by any float-convertible value
arr = np.float_(arr_str)
# Setting ground-motion attributes:
setattr(rctx, 'mag', arr[0])
setattr(rctx, 'rake', arr[1])
stress_drop = arr[2]
setattr(dctx, 'rjb', arr[3])
setattr(sctx, 'vs30', np.array([arr[4]]))
damp = arr[6]
# Compute ground-motion:
gmpe = gsim.ameri_2017.AmeriEtAl2017RjbStressDrop(
norm_stress_drop=stress_drop)
for k in range(len(periods)):
per = periods[k]
value = np.log(arr[
7 +
k]) # convert value to ln(SA) with SA in units of g
if per == 'pga':
P = imt.PGA()
else:
P = imt.SA(period=np.float_(per), damping=damp)
mean = gmpe.get_mean_and_stddevs(sctx, rctx, dctx, P,
stddev_types)[0]
np.testing.assert_almost_equal(mean,
value,
decimal=MEAN_DECIMAL)
def test_get_sigma_table(self):
"""
Test the retrieval of the standard deviation modification tables
for a given magnitude and IMT
"""
rctx = RuptureContext()
rctx.mag = 6.0
# PGA
expected_table = np.ones([10, 2])
expected_table[:, self.IDX] *= 0.8
stddevs = ["Total"]
pga_table = self.amp_table.get_sigma_tables(imt_module.PGA(), rctx,
stddevs)[0]
np.testing.assert_array_almost_equal(pga_table, expected_table)
# SA (for coverage)
sa_table = self.amp_table.get_sigma_tables(imt_module.SA(0.3), rctx,
stddevs)[0]
np.testing.assert_array_almost_equal(sa_table, expected_table)
def setUp(self):
self.orig_make_contexts = ContextMaker.make_contexts
ContextMaker.make_contexts = lambda self, sites, rupture: (
FakeSiteContext(sites), rupture, None)
self.truncation_level = 3.4
self.imts = {'PGA': [1, 2, 3], 'PGD': [2, 4]}
self.time_span = 49.2
rup11 = self.FakeRupture(0.23, const.TRT.ACTIVE_SHALLOW_CRUST)
rup12 = self.FakeRupture(0.15, const.TRT.ACTIVE_SHALLOW_CRUST)
rup21 = self.FakeRupture(0.04, const.TRT.VOLCANIC)
self.source1 = self.FakeSource(1, [rup11, rup12], self.time_span,
const.TRT.ACTIVE_SHALLOW_CRUST)
self.source2 = self.FakeSource(2, [rup21], self.time_span,
const.TRT.VOLCANIC)
self.sources = [self.source1, self.source2]
site1 = Site(Point(10, 20), 1, True, 2, 3)
site2 = Site(Point(20, 30), 2, False, 4, 5)
self.sites = SiteCollection([site1, site2])
gsim1 = self.FakeGSIM(
self.truncation_level,
self.imts,
poes={
(site1.location.latitude, rup11, imt.PGA()): [0.1, 0.05, 0.03],
(site2.location.latitude, rup11, imt.PGA()):
[0.11, 0.051, 0.034],
(site1.location.latitude, rup12, imt.PGA()):
[0.12, 0.052, 0.035],
(site2.location.latitude, rup12, imt.PGA()):
[0.13, 0.053, 0.036],
(site1.location.latitude, rup11, imt.PGD()): [0.4, 0.33],
(site2.location.latitude, rup11, imt.PGD()): [0.39, 0.331],
(site1.location.latitude, rup12, imt.PGD()): [0.38, 0.332],
(site2.location.latitude, rup12, imt.PGD()): [0.37, 0.333],
})
gsim2 = self.FakeGSIM(self.truncation_level,
self.imts,
poes={
(site1.location.latitude, rup21, imt.PGA()):
[0.5, 0.3, 0.2],
(site2.location.latitude, rup21, imt.PGA()):
[0.4, 0.2, 0.1],
(site1.location.latitude, rup21, imt.PGD()):
[0.24, 0.08],
(site2.location.latitude, rup21, imt.PGD()):
[0.14, 0.09],
})
self.gsims = {
const.TRT.ACTIVE_SHALLOW_CRUST: gsim1,
const.TRT.VOLCANIC: gsim2
}
def test_calculation_std_inter(self):
DATA_FILE = (data /
"AMERI2017/A17_Repi_Homoscedastic_INTER_EVENT_STDDEV.csv")
stddev_types = [const.StdDev.INTER_EVENT]
ctx = gsim.base.RuptureContext()
with open(DATA_FILE, 'r') as f:
# Read periods from header:
header = f.readline()
periods = header.strip().split(',')[7:] # Periods in s.
for line in f:
arr_str = line.strip().split(',')
arr_str[5] = "9999"
# Replace result_type string by any float-convertible value
arr = np.float_(arr_str)
# Setting ground-motion attributes:
setattr(ctx, 'mag', arr[0])
setattr(ctx, 'rake', arr[1])
stress_drop = arr[2]
setattr(ctx, 'repi', arr[3])
setattr(ctx, 'vs30', np.array([arr[4]]))
damp = arr[6]
ctx.sids = [0]
# Compute ground-motion:
gmpe = gsim.ameri_2017.AmeriEtAl2017RepiStressDrop(
norm_stress_drop=stress_drop)
for k in range(len(periods)):
per = periods[k]
value = arr[7 + k]
if per == 'pga':
P = imt.PGA()
else:
P = imt.SA(period=np.float_(per), damping=damp)
std = gmpe.get_mean_and_stddevs(ctx, ctx, ctx, P,
stddev_types)[1][0]
np.testing.assert_almost_equal(std,
value,
decimal=STDDEV_DECIMAL)
def test_get_mean_stddevs_unsupported_stddev(self):
"""
Tests the execution of the GMPE with an unsupported standard deviation
type
"""
gsim = GMPETable(gmpe_table=self.TABLE_FILE)
rctx = RuptureContext()
rctx.mag = 6.0
dctx = DistancesContext()
# Test values at the given distances and those outside range
dctx.rjb = np.array([0.5, 1.0, 10.0, 100.0, 500.0])
sctx = SitesContext()
sctx.vs30 = 1000. * np.ones(5)
stddevs = [const.StdDev.TOTAL, const.StdDev.INTER_EVENT]
with self.assertRaises(ValueError) as ve:
gsim.get_mean_and_stddevs(sctx, rctx, dctx, imt_module.PGA(),
stddevs)
self.assertEqual(str(ve.exception),
"Standard Deviation type Inter event not supported")
def get_mean_and_stddevs(self, sites, rup, dists, imt, stddev_types):
# List of GMPE weights, which is the product of the the branch weights
# for the seed models vs the NGA East resampled models as well as the
# weights for the indivudual GMPES as defined by Petersen et al. (2019)
#
# Note that the NGA East resampled models are a function of spectral
# period.
#
# NGA East Seeds (1/3)
# ├── B_bca10d (0.06633), wts = 0.333 * 0.06633 = 0.02208789
# ├── B_ab95 (0.02211), wts = 0.333 * 0.02211 = 0.00736263
# ...
# NGA East Resampled or "USGS" (2/3)
# ├── Model 1 (0.1009 for PGA), wts = 0.667 * 0.1009 = 0.0673003
# ├── Model 2 (0.1606 for PGA), wts = 0.667 * 0.1606 = 0.1071202
# ...
#
wts = [0] * len(self.gmpes)
# Is IMT PGA or PGV?
is_pga = imt == IMT.PGA()
is_pgv = imt == IMT.PGV()
# Is magnitude less than 4? If so, we will need to set it to 4.0 and
# then extrapolate the tables at the end.
if rup.mag < 4.0:
is_small_mag = True
delta_mag = rup.mag - 4.0
rup.mag = 4.0
else:
is_small_mag = False
for i, tp in enumerate(self.ALL_TABLE_PATHS):
if 'usgs' in tp:
# Get model number from i-th path using regex
mod_num = int(re.search(r'\d+', tp).group())
coefs = np.array(
self.NGA_EAST_USGS.iloc[mod_num - 1]
)
# Is the IMT PGA, PGA, or SA?
if is_pga:
iweight = coefs[-2]
elif is_pgv:
iweight = coefs[-1]
else:
# For SA, need to interpolate; we'll use log-period and
# linear-weight interpolation.
iweight = np.interp(
np.log(imt.period),
np.log(self.per_array),
coefs[self.per_idx_start:self.per_idx_end]
)
wts[i] = self.NGA_EAST_USGS_WEIGHT * iweight
else:
# Strip off the cruft to get the string we need to match
str_match = tp.replace('nga_east_', '').replace('.hdf5', '')
matched = self.NGA_EAST_SEEDS[
self.NGA_EAST_SEEDS['model'] == str_match]
if len(matched):
iweight = self.NGA_EAST_SEEDS[
self.NGA_EAST_SEEDS['model'] == str_match].iloc[0, 1]
wts[i] = self.NGA_EAST_SEED_WEIGHT * iweight
total_gmpe_weights = self.sigma_weights * wts
if not np.allclose(np.sum(total_gmpe_weights), 1.0):
raise ValueError('Weights must sum to 1.0.')
mean = np.full_like(sites.vs30, 0)
stddevs = []
for i in range(len(stddev_types)):
stddevs.append(np.full_like(sites.vs30, 0))
# Apply max distance to dists.rrup
np.clip(dists.rrup, 0, MAX_RRUP)
# Since we will be dropping the models that don't have PGV,
# we now also need to track the total sum of weights for when
# the imt is PGV so that we can re-distribute the weights.
if is_pgv:
twts = []
# Loop over gmpes
for i, gm in enumerate(self.gmpes):
if is_pgv:
# Is PGV and also not available for gm?
try:
gm._return_tables(rup.mag, imt, "IMLs")
except KeyError:
continue
except:
logging.error("Unexpected error:", sys.exc_info()[0])
tmean, tstddevs = gm.get_mean_and_stddevs(
sites, rup, dists, imt, stddev_types)
mean += tmean * total_gmpe_weights[i]
for j, sd in enumerate(tstddevs):
stddevs[j] += sd * total_gmpe_weights[i]
if is_pgv:
twts.append(total_gmpe_weights[i])
if is_pgv:
# Rescale the PGV wieghts so that they sum to 1 after dropping
# the models that are not defined for PGV.
mean = mean / np.sum(twts)
for j, sd in enumerate(stddevs):
stddevs[j] = stddevs[j] / np.sum(twts)
# Zero out values at distances beyond the range for which NGA East
# was defined.
mean[dists.rrup > MAX_RRUP] = -999.0
# Do we need to extrapolate for small magnitude factor?
if is_small_mag:
if is_pga:
slopes = np.interp(
np.log(dists.rrup),
np.log(self.SMALL_M_DIST),
self.SMALL_M_SLOPE_PGA)
elif is_pgv:
slopes = np.interp(
np.log(dists.rrup),
np.log(self.SMALL_M_DIST),
self.SMALL_M_SLOPE_PGV)
else:
interp_obj = RectBivariateSpline(
np.log(self.SMALL_M_DIST),
np.log(self.SMALL_M_PER),
self.SMALL_M_SLOPE, kx=1, ky=1)
slopes = interp_obj.ev(
np.log(dists.rrup),
np.log(imt.period)
)
mean = mean + slopes * delta_mag
return mean, stddevs
def test_pickeable(self):
for imt in (imt_module.PGA(), imt_module.SA(0.2)):
imt_pik = pickle.dumps(imt, pickle.HIGHEST_PROTOCOL)
self.assertEqual(pickle.loads(imt_pik), imt)
def compute_cs(t_cs, bgmpe, sctx, rctx, dctx, im_type, t_star, rrup, mag,
avg_periods, corr_type, im_star, gmpe_input):
"""
Compute the conditional spectrum according to the procedure outlined
in Baker JW, Lee C. An Improved Algorithm for Selecting Ground Motions
to Match a Conditional Spectrum. J Earthq Eng 2018;22:708-23.
https://doi.org/10.1080/13632469.2016.1264334.
When the IM and the GMM are defined for the maximum of the two horizontal
components, the The Boore and Kishida (2017) relationship is applied to
convert the maximum of the two horizontal components into `RotD50`. This is
done only for `PGA` and `SA`.
"""
import numpy as np
import sys
from openquake.hazardlib import imt, const, gsim
from .compute_avgSA import compute_rho_avgsa
from .modified_akkar_correlation_model import ModifiedAkkarCorrelationModel
# Use the same periods as the available spectra to construct the
# conditional spectrum
p = []
s = [const.StdDev.TOTAL]
if im_type == 'AvgSA':
_ = gsim.get_available_gsims()
p = imt.AvgSA()
mgmpe = gsim.mgmpe.generic_gmpe_avgsa.GenericGmpeAvgSA \
(gmpe_name=gmpe_input, avg_periods=avg_periods, corr_func=corr_type)
mu_im_cond, sigma_im_cond = mgmpe.get_mean_and_stddevs(
sctx, rctx, dctx, p, s)
else:
if im_type == 'PGA':
p = imt.PGA()
else:
p = imt.SA(t_star)
s = [const.StdDev.TOTAL]
mu_im_cond, sigma_im_cond = bgmpe().get_mean_and_stddevs(
sctx, rctx, dctx, p, s)
sigma_im_cond = sigma_im_cond[0]
if (bgmpe.DEFINED_FOR_INTENSITY_MEASURE_COMPONENT ==
'Greater of two horizontal'):
if im_type == 'PGA' or im_type == 'SA':
from shakelib.conversions.imc.boore_kishida_2017 import \
BooreKishida2017
bk17 = BooreKishida2017(const.IMC.GREATER_OF_TWO_HORIZONTAL,
const.IMC.RotD50)
mu_im_cond = bk17.convertAmps(p, mu_im_cond, rrup, float(mag))
sigma_im_cond = bk17.convertSigmas(p, sigma_im_cond[0])
else:
sys.exit('Error: conversion between intensity measures is not '
'possible for AvgSA')
# Compute how many standard deviations the PSHA differs from
# the GMPE value
epsilon = (np.log(im_star) - mu_im_cond) / sigma_im_cond
mu_im = np.zeros(len(t_cs))
sigma_im = np.zeros(len(t_cs))
rho_t_tstar = np.zeros(len(t_cs))
mu_im_im_cond = np.zeros(len(t_cs))
for i in range(len(t_cs)):
# Get the GMPE ouput for a rupture scenario
if t_cs[i] == 0.:
p = imt.PGA()
else:
p = imt.SA(t_cs[i])
s = [const.StdDev.TOTAL]
mu0, sigma0 = bgmpe().get_mean_and_stddevs(sctx, rctx, dctx, p, s)
if (bgmpe.DEFINED_FOR_INTENSITY_MEASURE_COMPONENT ==
'Greater of two horizontal'):
if im_type == 'PGA' or im_type == 'SA':
from shakelib.conversions.imc.boore_kishida_2017 \
import BooreKishida2017
bk17 = BooreKishida2017(const.IMC.GREATER_OF_TWO_HORIZONTAL,
const.IMC.RotD50)
mu0 = bk17.convertAmps(p, mu0, rrup, float(mag))
sigma0 = bk17.convertSigmas(p, sigma0[0])
mu_im[i] = mu0[0]
sigma_im[i] = sigma0[0][0]
rho = None
if im_type == 'AvgSA':
rho = compute_rho_avgsa(t_cs[i], avg_periods, sctx, rctx, dctx,
sigma_im_cond, bgmpe, corr_type)
rho = rho[0]
else:
if corr_type == 'baker_jayaram':
rho = gsim.mgmpe.generic_gmpe_avgsa. \
BakerJayaramCorrelationModel([t_cs[i], t_star])(0, 1)
if corr_type == 'akkar':
rho = ModifiedAkkarCorrelationModel([t_cs[i], t_star])(0, 1)
rho_t_tstar[i] = rho
# Get the value of the CMS
mu_im_im_cond[i] = \
mu_im[i] + rho_t_tstar[i] * epsilon[0] * sigma_im[i]
# Compute covariances and correlations at all periods
cov = np.zeros((len(t_cs), len(t_cs)))
for i in np.arange(len(t_cs)):
for j in np.arange(len(t_cs)):
var1 = sigma_im[i]**2
var2 = sigma_im[j]**2
var_tstar = sigma_im_cond**2
sigma_corr = []
if corr_type == 'baker_jayaram':
sigma_corr = gsim.mgmpe.generic_gmpe_avgsa. \
BakerJayaramCorrelationModel([t_cs[i], t_cs[j]])(0, 1) * \
np.sqrt(var1 * var2)
if corr_type == 'akkar':
sigma_corr = ModifiedAkkarCorrelationModel([t_cs[i], t_cs[j]])(0, 1) * \
np.sqrt(var1 * var2)
sigma11 = np.matrix([[var1, sigma_corr], [sigma_corr, var2]])
sigma22 = np.array(var_tstar)
sigma12 = np.array([
rho_t_tstar[i] * np.sqrt(var1 * var_tstar),
rho_t_tstar[j] * np.sqrt(var_tstar * var2)
])
sigma_cond = sigma11 - sigma12 * 1. / (sigma22) * sigma12.T
cov[i, j] = sigma_cond[0, 1]
# find covariance values of zero and set them to a small number
# so that random number generation can be performed
cov[np.absolute(cov) < 1e-10] = 1e-10
stdevs = np.sqrt(np.diagonal(cov))
return mu_im_im_cond, cov, stdevs
def trim_multiple_events(
st,
origin,
catalog,
travel_time_df,
pga_factor,
pct_window_reject,
gmpe,
site_parameters,
rupture_parameters,
):
"""
Uses a catalog (list of ScalarEvents) to handle cases where a trace might
contain signals from multiple events. The catalog should contain events
down to a low enough magnitude in relation to the events of interest.
Overall, the algorithm is as follows:
1) For each earthquake in the catalog, get the P-wave travel time
and estimated PGA at this station.
2) Compute the PGA (of the as-recorded horizontal channels).
3) Select the P-wave arrival times across all events for this record
that are (a) within the signal window, and (b) the predicted PGA is
greater than pga_factor times the PGA from step #1.
4) If any P-wave arrival times match the above criteria, then if any of
the arrival times fall within in the first pct_window_reject*100%
of the signal window, then reject the record. Otherwise, trim the
record such that the end time does not include any of the arrivals
selected in step #3.
Args:
st (StationStream):
Stream of data.
origin (ScalarEvent):
ScalarEvent object associated with the StationStream.
catalog (list):
List of ScalarEvent objects.
travel_time_df (DataFrame):
A pandas DataFrame that contains the travel time information
(obtained from
gmprocess.waveform_processing.phase.create_travel_time_dataframe).
The columns in the DataFrame are the station ids and the indices
are the earthquake ids.
pga_factor (float):
A decimal factor used to determine whether the predicted PGA
from an event arrival is significant enough that it should be
considered for removal.
pct_window_reject (float):
A decimal from 0.0 to 1.0 used to determine if an arrival should
be trimmed from the record, or if the entire record should be
rejected. If the arrival falls within the first
pct_window_reject * 100% of the signal window, then the entire
record will be rejected. Otherwise, the record will be trimmed
appropriately.
gmpe (str):
Short name of the GMPE to use. Must be defined in the modules file.
site_parameters (dict):
Dictionary of site parameters to input to the GMPE.
rupture_parameters:
Dictionary of rupture parameters to input to the GMPE.
Returns:
StationStream: Processed stream.
"""
if not st.passed:
return st
# Check that we know the signal split for each trace in the stream
for tr in st:
if not tr.hasParameter("signal_split"):
return st
signal_window_starttime = st[0].getParameter("signal_split")["split_time"]
arrivals = travel_time_df[st[0].stats.network + "." + st[0].stats.station]
arrivals = arrivals.sort_values()
# Filter by any arrival times that appear in the signal window
arrivals = arrivals[(arrivals > signal_window_starttime)
& (arrivals < st[0].stats.endtime)]
# Make sure we remove the arrival that corresponds to the event of interest
if origin.id in arrivals.index:
arrivals.drop(index=origin.id, inplace=True)
if arrivals.empty:
return st
# Calculate the recorded PGA for this record
stasum = StationSummary.from_stream(st, ["ROTD(50.0)"], ["PGA"])
recorded_pga = stasum.get_pgm("PGA", "ROTD(50.0)")
# Load the GMPE model
gmpe = load_model(gmpe)
# Generic context
rctx = RuptureContext()
# Make sure that site parameter values are converted to numpy arrays
site_parameters_copy = site_parameters.copy()
for k, v in site_parameters_copy.items():
site_parameters_copy[k] = np.array([site_parameters_copy[k]])
rctx.__dict__.update(site_parameters_copy)
# Filter by arrivals that have significant expected PGA using GMPE
is_significant = []
for eqid, arrival_time in arrivals.items():
event = next(event for event in catalog if event.id == eqid)
# Set rupture parameters
rctx.__dict__.update(rupture_parameters)
rctx.mag = event.magnitude
# TODO: distances should be calculated when we refactor to be
# able to import distance calculations
rctx.repi = np.array([
gps2dist_azimuth(
st[0].stats.coordinates.latitude,
st[0].stats.coordinates.longitude,
event.latitude,
event.longitude,
)[0] / 1000
])
rctx.rjb = rctx.repi
rctx.rhypo = np.sqrt(rctx.repi**2 + event.depth_km**2)
rctx.rrup = rctx.rhypo
rctx.sids = np.array(range(np.size(rctx.rrup)))
pga, sd = gmpe.get_mean_and_stddevs(rctx, rctx, rctx, imt.PGA(), [])
# Convert from ln(g) to %g
predicted_pga = 100 * np.exp(pga[0])
if predicted_pga > (pga_factor * recorded_pga):
is_significant.append(True)
else:
is_significant.append(False)
significant_arrivals = arrivals[is_significant]
if significant_arrivals.empty:
return st
# Check if any of the significant arrivals occur within the
signal_length = st[0].stats.endtime - signal_window_starttime
cutoff_time = signal_window_starttime + pct_window_reject * (signal_length)
if (significant_arrivals < cutoff_time).any():
for tr in st:
tr.fail("A significant arrival from another event occurs within "
"the first %s percent of the signal window" %
(100 * pct_window_reject))
# Otherwise, trim the stream at the first significant arrival
else:
for tr in st:
signal_end = tr.getParameter("signal_end")
signal_end["end_time"] = significant_arrivals[0]
signal_end["method"] = "Trimming before right another event"
tr.setParameter("signal_end", signal_end)
cut(st)
return st
def oq_run(
model: Enum,
tect_type: Enum,
rupture_df: pd.DataFrame,
im: str,
periods: Sequence[Union[int, float]] = None,
**kwargs,
):
"""Run an openquake model with dataframe
model: Enum
OQ model name
tect_type: Enum
One of the tectonic types from
ACTIVE_SHALLOW, SUBDUCTION_SLAB and SUBDUCTION_INTERFACE
rupture_df: Rupture DF
Columns for properties. E.g., vs30, z1pt0, rrup, rjb, mag, rake, dip....
Rows be the separate site-fault pairs
But Site information must be identical across the rows,
only the faults can be different.
im: string
intensity measure
periods: Sequence[Union[int, float]]
for spectral acceleration, openquake tables automatically
interpolate values between specified values, fails if outside range
kwargs: pass extra (model specific) parameters to models
"""
model = (OQ_MODELS[model][tect_type](
**kwargs) if not model.name.endswith("_NZ") else
OQ_MODELS[model][tect_type](region="NZL", **kwargs))
# Check the given tect_type with its model's tect type
trt = model.DEFINED_FOR_TECTONIC_REGION_TYPE
if trt == const.TRT.SUBDUCTION_INTERFACE:
assert tect_type == TectType.SUBDUCTION_INTERFACE
elif trt == const.TRT.SUBDUCTION_INTRASLAB:
assert tect_type == TectType.SUBDUCTION_SLAB
elif trt == const.TRT.ACTIVE_SHALLOW_CRUST:
assert tect_type == TectType.ACTIVE_SHALLOW
else:
raise ValueError("unknown tectonic region: " + trt)
stddev_types = [
std for std in SPT_STD_DEVS
if std in model.DEFINED_FOR_STANDARD_DEVIATION_TYPES
]
# Make a copy in case the original rupture_df used with other functions
rupture_df = rupture_df.copy()
# Check if df contains what model requires
rupture_ctx_properties = set(rupture_df.columns.values)
extra_site_parameters = set(
model.REQUIRES_SITES_PARAMETERS).difference(rupture_ctx_properties)
if len(extra_site_parameters) > 0:
raise ValueError("unknown site property: " + extra_site_parameters)
extra_rup_properties = set(
model.REQUIRES_RUPTURE_PARAMETERS).difference(rupture_ctx_properties)
if len(extra_rup_properties) > 0:
raise ValueError("unknown rupture property: " +
" ".join(extra_rup_properties))
extra_dist_properties = set(
model.REQUIRES_DISTANCES).difference(rupture_ctx_properties)
if len(extra_dist_properties) > 0:
raise ValueError("unknown distance property: " +
" ".join(extra_dist_properties))
# Convert z1pt0 from km to m
rupture_df["z1pt0"] *= 1000
# OQ's single new-style context which contains all site, distance and rupture's information
rupture_ctx = contexts.RuptureContext(
tuple([
# Openquake requiring occurrence_rate attribute to exist
("occurrence_rate", None),
# sids is the number of sites provided (OQ term)
# This term needs to be repeated for the number of rows in the df
("sids", [1] * rupture_df.shape[0]),
*((
column,
rupture_df.loc[:, column].values,
) for column in rupture_df.columns.values),
]))
if periods is not None:
assert imt.SA in model.DEFINED_FOR_INTENSITY_MEASURE_TYPES
# use sorted instead of max for full list
avail_periods = np.asarray([
im.period
for im in (model.COEFFS.sa_coeffs.keys() if not isinstance(
model,
(
gsim.zhao_2006.ZhaoEtAl2006Asc,
gsim.zhao_2006.ZhaoEtAl2006SSlab,
gsim.zhao_2006.ZhaoEtAl2006SInter,
),
) else model.COEFFS_ASC.sa_coeffs.keys())
])
max_period = max(avail_periods)
if not hasattr(periods, "__len__"):
periods = [periods]
results = []
for period in periods:
im = imt.SA(period=min(period, max_period))
try:
result = oq_mean_stddevs(model, rupture_ctx, im, stddev_types)
except KeyError as ke:
cause = ke.args[0]
# To make sure the KeyError is about missing pSA's period
if (isinstance(cause, imt.IMT) and str(cause).startswith("SA")
and cause.period > 0.0):
# Period is smaller than model's supported min_period E.g., ZA_06
# Interpolate between PGA(0.0) and model's min_period
low_result = oq_mean_stddevs(model, rupture_ctx, imt.PGA(),
stddev_types)
high_period = avail_periods[period <= avail_periods][0]
high_result = oq_mean_stddevs(model, rupture_ctx,
imt.SA(period=high_period),
stddev_types)
result = interpolate_with_pga(period, high_period,
low_result, high_result)
else:
# KeyError that we cannot handle
logging.exception(ke)
raise
except Exception as e:
# Any other exceptions that we cannot handle
logging.exception(e)
raise
# extrapolate pSA value up based on maximum available period
if period > max_period:
result.loc[:,
result.columns.str.endswith("mean")] += 2 * np.log(
max_period / period)
# Updating the period from max_period to the given period
# E.g with ZA_06, replace 5.0 to period > 5.0
result.columns = result.columns.str.replace(str(max_period),
str(period),
regex=False)
results.append(result)
return pd.concat(results, axis=1)
else:
imc = getattr(imt, im)
assert imc in model.DEFINED_FOR_INTENSITY_MEASURE_TYPES
return oq_mean_stddevs(model, rupture_ctx, imc(), stddev_types)
def _get_extent_from_multigmpe(rupture, config=None):
"""
Use MultiGMPE to determine extent
"""
(clon, clat) = _rupture_center(rupture)
origin = rupture.getOrigin()
if config is not None:
gmpe = MultiGMPE.from_config(config)
gmice = get_object_from_config('gmice', 'modeling', config)
if imt.SA in gmice.DEFINED_FOR_INTENSITY_MEASURE_TYPES:
default_imt = imt.SA(1.0)
elif imt.PGV in gmice.DEFINED_FOR_INTENSITY_MEASURE_TYPES:
default_imt = imt.PGV()
else:
default_imt = imt.PGA()
else:
# Put in some default values for conf
config = {
'extent': {
'mmi': {
'threshold': 4.5,
'mindist': 100,
'maxdist': 1000
}
}
}
# Generic GMPEs choices based only on active vs stable
# as defaults...
stable = is_stable(origin.lon, origin.lat)
if not stable:
ASK14 = AbrahamsonEtAl2014()
CB14 = CampbellBozorgnia2014()
CY14 = ChiouYoungs2014()
gmpes = [ASK14, CB14, CY14]
site_gmpes = None
weights = [1/3.0, 1/3.0, 1/3.0]
gmice = WGRW12()
else:
Fea96 = FrankelEtAl1996MwNSHMP2008()
Tea97 = ToroEtAl1997MwNSHMP2008()
Sea02 = SilvaEtAl2002MwNSHMP2008()
C03 = Campbell2003MwNSHMP2008()
TP05 = TavakoliPezeshk2005MwNSHMP2008()
AB06p = AtkinsonBoore2006Modified2011()
Pea11 = PezeshkEtAl2011()
Atk08p = Atkinson2008prime()
Sea01 = SomervilleEtAl2001NSHMP2008()
gmpes = [Fea96, Tea97, Sea02, C03,
TP05, AB06p, Pea11, Atk08p, Sea01]
site_gmpes = [AB06p]
weights = [0.16, 0.0, 0.0, 0.17, 0.17, 0.3, 0.2, 0.0, 0.0]
gmice = AK07()
gmpe = MultiGMPE.from_list(
gmpes, weights, default_gmpes_for_site=site_gmpes)
default_imt = imt.SA(1.0)
min_mmi = config['extent']['mmi']['threshold']
sd_types = [const.StdDev.TOTAL]
# Distance context
dx = DistancesContext()
# This imposes minimum/ maximum distances of:
# 80 and 800 km; could make this configurable
d_min = config['extent']['mmi']['mindist']
d_max = config['extent']['mmi']['maxdist']
dx.rjb = np.logspace(np.log10(d_min), np.log10(d_max), 2000)
# Details don't matter for this; assuming vertical surface rupturing fault
# with epicenter at the surface.
dx.rrup = dx.rjb
dx.rhypo = dx.rjb
dx.repi = dx.rjb
dx.rx = np.zeros_like(dx.rjb)
dx.ry0 = np.zeros_like(dx.rjb)
dx.rvolc = np.zeros_like(dx.rjb)
# Sites context
sx = SitesContext()
# Set to soft soil conditions
sx.vs30 = np.full_like(dx.rjb, 180)
sx = MultiGMPE.set_sites_depth_parameters(sx, gmpe)
sx.vs30measured = np.full_like(sx.vs30, False, dtype=bool)
sx = Sites._addDepthParameters(sx)
sx.backarc = np.full_like(sx.vs30, False, dtype=bool)
# Rupture context
rx = RuptureContext()
rx.mag = origin.mag
rx.rake = 0.0
# From WC94...
rx.width = 10**(-0.76 + 0.27*rx.mag)
rx.dip = 90.0
rx.ztor = origin.depth
rx.hypo_depth = origin.depth
gmpe_imt_mean, _ = gmpe.get_mean_and_stddevs(
sx, rx, dx, default_imt, sd_types)
# Convert to MMI
gmpe_to_mmi, _ = gmice.getMIfromGM(gmpe_imt_mean, default_imt)
# Minimum distance that exceeds threshold MMI?
dists_exceed_mmi = dx.rjb[gmpe_to_mmi > min_mmi]
if len(dists_exceed_mmi):
mindist_km = np.max(dists_exceed_mmi)
else:
mindist_km = d_min
# Get a projection
proj = OrthographicProjection(clon - 4, clon + 4, clat + 4, clat - 4)
if isinstance(rupture, (QuadRupture, EdgeRupture)):
ruptx, rupty = proj(
rupture.lons[~np.isnan(rupture.lons)],
rupture.lats[~np.isnan(rupture.lats)]
)
else:
ruptx, rupty = proj(clon, clat)
xmin = np.nanmin(ruptx) - mindist_km
ymin = np.nanmin(rupty) - mindist_km
xmax = np.nanmax(ruptx) + mindist_km
ymax = np.nanmax(rupty) + mindist_km
# Put a limit on range of aspect ratio
dx = xmax - xmin
dy = ymax - ymin
ar = dy / dx
if ar > 1.2:
# Inflate x
dx_target = dy / 1.2
ddx = dx_target - dx
xmax = xmax + ddx / 2
xmin = xmin - ddx / 2
if ar < 0.83:
# Inflate y
dy_target = dx * 0.83
ddy = dy_target - dy
ymax = ymax + ddy / 2
ymin = ymin - ddy / 2
lonmin, latmin = proj(np.array([xmin]), np.array([ymin]), reverse=True)
lonmax, latmax = proj(np.array([xmax]), np.array([ymax]), reverse=True)
#
# Round coordinates to the nearest minute -- that should make the
# output grid register with common grid resolutions (60c, 30c,
# 15c, 7.5c)
#
logging.debug("Extent: %f, %f, %f, %f" %
(lonmin, lonmax, latmin, latmax))
return _round_coord(lonmin[0]), _round_coord(lonmax[0]), \
_round_coord(latmin[0]), _round_coord(latmax[0])
def get_mean_and_stddevs(self, sites, rx, dists, imt, stddev_types):
# List of GMPE weights, which is the product of the the branch weights
# for the seed models vs the NGA East resampled models as well as the
# weights for the indivudual GMPES as defined by Petersen et al. (2019)
#
# Note that the NGA East resampled models are a function of spectral
# period.
#
# NGA East Seeds (1/3)
# ├── B_bca10d (0.06633), wts = 0.333 * 0.06633 = 0.02208789
# ├── B_ab95 (0.02211), wts = 0.333 * 0.02211 = 0.00736263
# ...
# NGA East Resampled or "USGS" (2/3)
# ├── Model 1 (0.1009 for PGA), wts = 0.667 * 0.1009 = 0.0673003
# ├── Model 2 (0.1606 for PGA), wts = 0.667 * 0.1606 = 0.1071202
# ...
#
wts = [0] * len(self.gmpes)
# Is IMT PGA or PGV?
is_pga = imt == IMT.PGA()
is_pgv = imt == IMT.PGV()
# Is magnitude less than 4? If so, we will need to set it to 4.0 and
# then extrapolate the tables at the end.
# But... in the brave new world of new OpenQuake, sites, rx, and
# dists are all exactly the same object, so when we copy rx to
# rup, and change it, as well as when we change the distances
# below, we need to do it all in rup, then pass rup as all three
# contexts when we call the gmpe.get_mean_and_stddevs()
rup = copy.deepcopy(rx)
if rup.mag < 4.0:
is_small_mag = True
delta_mag = rup.mag - 4.0
rup.mag = 4.0
else:
is_small_mag = False
for i, tp in enumerate(self.ALL_TABLE_PATHS):
if 'usgs' in tp:
# Get model number from i-th path using regex
mod_num = int(re.search(r'\d+', tp).group())
coefs = np.array(self.NGA_EAST_USGS.iloc[mod_num - 1])
# Is the IMT PGA, PGA, or SA?
if is_pga:
iweight = coefs[-2]
elif is_pgv:
iweight = coefs[-1]
else:
# For SA, need to interpolate; we'll use log-period and
# linear-weight interpolation.
iweight = np.interp(
np.log(imt.period), np.log(self.per_array),
coefs[self.per_idx_start:self.per_idx_end])
wts[i] = self.NGA_EAST_USGS_WEIGHT * iweight
else:
# Strip off the cruft to get the string we need to match
str_match = tp.replace('nga_east_', '').replace('.hdf5', '')
matched = self.NGA_EAST_SEEDS[self.NGA_EAST_SEEDS['model'] ==
str_match]
if len(matched):
iweight = self.NGA_EAST_SEEDS[self.NGA_EAST_SEEDS['model']
== str_match].iloc[0, 1]
wts[i] = self.NGA_EAST_SEED_WEIGHT * iweight
total_gmpe_weights = self.sigma_weights * wts
if not np.allclose(np.sum(total_gmpe_weights), 1.0):
raise ValueError('Weights must sum to 1.0.')
mean = np.full_like(sites.vs30, 0)
stddevs = []
for i in range(len(stddev_types)):
stddevs.append(np.full_like(sites.vs30, 0))
# Apply max distance to dists.rrup -->> now rup.rrup
np.clip(rup.rrup, 0, MAX_RRUP)
#
# Some models don't have PGV terms, so we will make PSA for them
# and then use the conditional conversion to get PGV
#
if is_pgv:
ab2020 = AbrahamsonBhasin2020(rup.mag)
vimt = IMT.SA(ab2020.getTref())
# Loop over gmpes
for i, gm in enumerate(self.gmpes):
if is_pgv:
# Is PGV and also not available for gm?
try:
_ = _return_tables(gm, rup.mag, imt, "IMLs")
except KeyError:
#
# No table for PGV, compute vimt, then convert to PGV
#
vmean, vstddevs = gm.get_mean_and_stddevs(
rup, rup, rup, vimt, stddev_types)
tmean, tstddevs = ab2020.getPGVandSTDDEVS(
vmean, vstddevs, stddev_types, rup.rrup, rup.vs30)
except Exception:
logging.error("Unexpected error:", sys.exc_info()[0])
else:
#
# Table exists for PGV, proceed normally
#
tmean, tstddevs = gm.get_mean_and_stddevs(
rup, rup, rup, imt, stddev_types)
else:
tmean, tstddevs = gm.get_mean_and_stddevs(
rup, rup, rup, imt, stddev_types)
mean += tmean * total_gmpe_weights[i]
for j, sd in enumerate(tstddevs):
stddevs[j] += sd * total_gmpe_weights[i]
# Zero out values at distances beyond the range for which NGA East
# was defined. -->> was dists.rrup, now rup.rrup
mean[rup.rrup > MAX_RRUP] = -999.0
# Do we need to extrapolate for small magnitude factor?
if is_small_mag:
if is_pga:
slopes = np.interp(np.log(rup.rrup), np.log(self.SMALL_M_DIST),
self.SMALL_M_SLOPE_PGA)
elif is_pgv:
slopes = np.interp(np.log(rup.rrup), np.log(self.SMALL_M_DIST),
self.SMALL_M_SLOPE_PGV)
else:
interp_obj = RectBivariateSpline(np.log(self.SMALL_M_DIST),
np.log(self.SMALL_M_PER),
self.SMALL_M_SLOPE,
kx=1,
ky=1)
slopes = interp_obj.ev(np.log(rup.rrup), np.log(imt.period))
mean = mean + slopes * delta_mag
return mean, stddevs
from shakelib.gmpe.nga_east import NGAEast
home_dir = os.path.dirname(os.path.abspath(__file__))
data_dir = os.path.join(home_dir, 'nga_east_data')
stddev_types = [StdDev.TOTAL]
gmpe = NGAEast()
dx = base.DistancesContext()
dx.rrup = np.logspace(-1, np.log10(2000), 100)
rx = base.RuptureContext()
sx = base.SitesContext()
IMTS = [imt.PGA(), imt.PGV(), imt.SA(0.3), imt.SA(1.0), imt.SA(3.0)]
MAGS = [3, 5, 6, 7]
VS30 = [180, 380, 760, 2000]
def update_results():
# To build the data for testing
result = {}
for i in IMTS:
ikey = i.__str__()
result[ikey] = {}
for mag in MAGS:
rx.mag = mag
result[ikey][str(mag)] = {}
# Print output
print(out)
print(err)
log = str(out) + str(err)
## Read in the output file:
vs30_data = np.genfromtxt('tmp2', usecols=2)
pd.DataFrame(vs30_data).to_csv(
'/home/eking/Documents/internship/data/Kappa/vs30.csv')
kappa_data = fullfile[' tstar(s) ']
############# GMPEs ###################
imt_pga = imt.PGA()
imt_pgv = imt.PGV()
imt_arias = imt.IA()
uncertaintytype = const.StdDev.TOTAL
## Set GMPEs:
zhao2006 = ZhaoEtAl2006SInter()
travasarou = TravasarouEtAl2003()
bssa14 = BooreEtAl2014()
## Set the empty arrays:
median_zhao2006 = np.array([])
median_travasarou = np.array([])
median_bssa14 = np.array([])
sd_zhao2006 = np.array([])
