def test_serial_dilution(self):
plate = containers.load('96-flat', 'B1', 'plate')
tiprack = containers.load(
'tiprack-200ul', # container type from library
'A1', # slot on deck
'tiprack' # calibration reference for 1.2 compatibility
)
trough = containers.load('trough-12row', 'B1', 'trough')
trash = containers.load('point', 'A2', 'trash')
p200 = instruments.Pipette(
trash_container=trash,
tip_racks=[tiprack],
min_volume=10, # These are variable
axis="b",
channels=1)
p200.set_max_volume(200)
p200.calibrate_plunger(top=0, bottom=10, blow_out=12, drop_tip=13)
for t, col in enumerate(plate.cols):
p200.pick_up_tip(tiprack[t])
p200.aspirate(10, trough[t])
p200.dispense(10, col[0])
for well, next_well in zip(col[:-1], col[1:]):
p200.aspirate(10, well)
p200.dispense(10, next_well).mix(3)
p200.drop_tip(trash)
def setUp(self):
self.robot = Robot.reset()
options = {
'limit_switches': True,
'firmware': 'v1.0.5',
'config': {
'ot_version': 'one_pro',
'version': 'v1.0.3', # config version
'alpha_steps_per_mm': 80.0,
'beta_steps_per_mm': 80.0
}
}
self.robot.connect(options=options)
self.robot.home()
self.trash = containers.load('point', 'A1')
self.tiprack = containers.load('tiprack-10ul', 'B2')
self.plate = containers.load('96-flat', 'A2')
self.p200 = instruments.Pipette(
trash_container=self.trash,
tip_racks=[self.tiprack],
min_volume=10, # These are variable
axis="b",
channels=1
)
self.p200.calibrate_plunger(top=0, bottom=10, blow_out=12, drop_tip=13)
self.p200.set_max_volume(200)
def setUp(self):
Robot.reset()
self.robot = Robot.get_instance()
# self.robot.connect(port='/dev/tty.usbmodem1421')
# self.robot.home()
self.trash = containers.load('point', 'A1', 'trash')
self.tiprack = containers.load('tiprack-200ul', 'B2', 'p200-rack')
self.trough = containers.load('trough-12row', 'B2', 'trough')
self.plate = containers.load('96-flat', 'A2', 'magbead')
self.p200 = instruments.Pipette(
name="p200",
trash_container=self.trash,
tip_racks=[self.tiprack],
min_volume=10, # These are variable
axis="b",
channels=1)
self.p1000 = instruments.Pipette(
name="p1000",
trash_container=self.trash,
tip_racks=[self.tiprack],
min_volume=100, # These are variable
axis="a",
channels=1)
def test_deck_setup(self):
deck = self.robot.deck
trash = containers.load('point', 'A1', 'myTrash')
tiprack = containers.load('tiprack-10ul', 'B2')
self.assertTrue(isinstance(tiprack, Container))
self.assertTrue(isinstance(deck, Deck))
self.assertTrue(deck.has_container(trash))
self.assertTrue(deck.has_container(tiprack))
def test_protocol_container_setup(self):
plate = containers.load('96-flat', 'A1', 'myPlate')
tiprack = containers.load('tiprack-10ul', 'B2')
containers_list = self.robot.containers().values()
self.assertEqual(len(containers_list), 2)
self.assertEqual(self.robot._deck['A1']['myPlate'], plate)
self.assertEqual(self.robot._deck['B2']['tiprack-10ul'], tiprack)
self.assertTrue(plate in containers_list)
self.assertTrue(tiprack in containers_list)
def test_protocol_head(self):
trash = containers.load('point', 'A1', 'myTrash')
tiprack = containers.load('tiprack-10ul', 'B2')
p200 = instruments.Pipette(
name='myPipette',
trash_container=trash,
tip_racks=[tiprack],
min_volume=10, # These are variable
axis="b",
channels=1
)
instruments_list = self.robot.get_instruments()
self.assertEqual(instruments_list[0], ('B', p200))
instruments_list = self.robot.get_instruments('myPipette')
self.assertEqual(instruments_list[0], ('B', p200))
def process_deck(self):
"""
"deck": {
"p200-rack": {
"labware": "tiprack-200ul",
"slot" : "A1"
},
".75 mL Tube Rack": {
"labware": "tube-rack-.75ml",
"slot" : "C1"
},
"trash": {
"labware": "point",
"slot" : "B2"
}
}
:return:
"""
deck_info = self.protocol['deck']
deck_data = {}
for container_label, definition in deck_info.items():
try:
container_type = definition.get('labware')
except KeyError:
raise JSONProcessorRuntimeError(
'Labware and Slot are required items for "{}" container '
'definition'.format(container_label)
)
slot = definition.get('slot')
if not slot:
slot = self.get_unallocated_slot()
self.warnings.append(
'No SLOT was associated with container "{}", auto '
'assigning container to slot {}'
.format(container_label, slot)
)
container_obj = containers.load(
container_type, slot, container_label
)
deck_data[container_label] = {'instance': container_obj}
self.deck = deck_data
def setUp(self):
self.robot = Robot.reset_for_tests()
options = {
'limit_switches': False,
'firmware': 'v1.0.5',
'config': {
'ot_version': 'one_pro',
'version': 'v1.0.3', # config version
'alpha_steps_per_mm': 80.0,
'beta_steps_per_mm': 80.0
}
}
self.robot.connect(options=options)
self.robot.home()
self.plate = containers.load('96-flat', 'A2')
self.magbead = instruments.Magbead(mosfet=0, container=self.plate)
self.robot._driver.set_mosfet = mock.Mock()
self.robot._driver.wait = mock.Mock()
def protocol(self):
robot = Robot.get_instance()
robot.get_serial_ports_list()
options = {
'limit_switches': True,
'firmware': 'v1.0.5',
'config': {
'ot_version': 'one_pro',
'version': 'v1.0.3', # config version
'alpha_steps_per_mm': 80.0,
'beta_steps_per_mm': 80.0
}
}
robot.connect(options=options)
robot.home()
tiprack = containers.load(
'tiprack-200ul', # container type
'A1', # slot
'tiprack' # user-defined name
)
plate = containers.load('96-flat', 'B1', 'plate')
trash = containers.load('point', 'C2', 'trash')
trough = containers.load('trough-12row', 'B2', 'trough')
p200 = instruments.Pipette(name="p200",
trash_container=trash,
tip_racks=[tiprack],
min_volume=0.5,
axis="b",
channels=1)
p200.set_max_volume(200)
calibration_data = """
{
"b": {
"blowout": 28.0,
"bottom": 26.0,
"droptip": 32.0,
"resting": 0,
"theContainers": {
"plate": {
"rel_x": 181.696,
"rel_y": 0.700999999999965,
"rel_z": 9.600999999999999,
"x": 202.195,
"y": 370.304,
"z": 125.7
},
"tiprack": {
"rel_x": 0.0,
"rel_y": 0.0,
"rel_z": 0.0,
"x": 20.499,
"y": 369.603,
"z": 116.099
},
"trough": {
"rel_x": 0.0,
"rel_y": 0.0,
"rel_z": 0.0,
"x": 20.499,
"y": 269.603,
"z": 116.099
},
"trash": {
"rel_x": 212.701,
"rel_y": -200.801,
"rel_z": -58.399,
"x": 233.2,
"y": 171.305,
"z": 57.7
}
},
"tip_rack_origin": "tiprack",
"tip_racks": [
{
"container": "tiprack"
}
],
"top": 13.0,
"trash_container": {
"container": "trash"
},
"volume": 200
}
}
"""
import_calibration_json(calibration_data, robot, True)
robot.clear()
# distribute
p200.pick_up_tip(tiprack[0])
p200.aspirate(96 * 2, trough[0])
for i in range(96):
p200.dispense(2, plate[i]).touch_tip()
p200.drop_tip(tiprack[0])
p200.pick_up_tip(tiprack[1])
for i in range(96):
p200.aspirate(2, plate[95 - i])
p200.dispense(trough[0])
p200.drop_tip(tiprack[1])
import os
from opentrons_sdk import containers
from opentrons_sdk.labware import instruments
from opentrons_sdk.robot import Robot
from opentrons_sdk.drivers.motor import CNCDriver
from helpers.calibration import import_json_calibration
robot = Robot.get_instance()
robot._driver = CNCDriver()
plate = containers.load('96-flat', 'A2', 'magbead')
trash = containers.load('point', 'A1', 'trash')
tiprack = containers.load('tiprack-200ul', 'B2', 'p200-rack')
# tipracks need a Well height equal to the tip length
for tip in tiprack:
tip.properties['height'] = 80
p200 = instruments.Pipette(
name="p200",
trash_container=trash,
tip_racks=[tiprack],
min_volume=0.1, # These are variable
axis="b",
channels=1
)
p200.set_max_volume(200)
def setUp(self):
Robot.reset()
self.plate = containers.load('96-flat', 'A2')
from opentrons_sdk import containers
from opentrons_sdk.labware import instruments
from opentrons_sdk.robot import Robot
from opentrons_sdk.drivers.motor import CNCDriver
robot = Robot.get_instance()
robot._driver = CNCDriver()
plate = containers.load('96-flat', 'A2')
trash = containers.load('point', 'A3')
tiprack = containers.load('tiprack-10ul', 'B2')
p200 = instruments.Pipette(
trash_container=trash,
tip_racks=[tiprack],
min_volume=0.1, # These are variable
axis="b",
channels=1)
robot.connect('/dev/tty.usbmodem1421')
# robot.home()
robot.move_head(x=144, y=269.5)
robot.move_head(z=-50)
p200.calibrate_position((plate, plate[0].center(plate)))
p200.calibrate_plunger(top=0, bottom=15, blow_out=18, drop_tip=20)
p200.set_max_volume(200)
# p200.aspirate(200, plate[0])
