def _demo_mode(self, connection):
""" Continuously broadcast a demo image """
os.abspath(__name__)
stream = io.open(os.path.dirname(os.path.abspath(__file__)) +
'test.bmp', 'rb')
stream.seek(0, 2)
while self.mode == 'demo':
connection.write(struct.pack('<L', stream.tell()))
connection.flush()
stream.seek(0)
connection.write(stream.read())
stream.seek(0, 2)
# Write a length of zero to the stream to signal that we're done
connection.write(struct.pack('<L', 0))
def __in_place_uncompress(self, filein):
"""Uncompress the file ``in-place''
- It is better to use here ``os.system'' or ``popen''-family,
but unfortunately it does not work properly for multithreaded environemnt
"""
_, ext = os.path.splitext(filein)
if (not ext) or (ext not in self.extensions):
logger.error('Unknown extension for %s' % filein)
##
out, _ = os.path.split(filein)
outdir = out if out else '.'
assert os.access ( outdir , os.W_OK ) ,\
'The directory "%s" is not writeable!' % os.abspath ( outdir )
## uncompress the file
tfiles = self.uncompress_file(filein)
# remove the original
os.remove(filein)
ofiles = []
for f in tfiles:
_, ff = os.path.split(f)
ff = os.path.join(out, ff)
shutil.move(f, ff)
ofiles.append(ff)
return tuple(ofiles)
def backengine(self):
""" This method drives the backengine code."""
status = 0
data_source = generateTestFilePath('pmi_out_0000001.h5')
try:
if self.parameters['number_of_trajectories'] == 1:
data_target = os.abspath(self.output_path)
command_string = 'cp %s %s' % (data_source, data_target)
proc = subprocess.Popen(command_string, shell=True)
proc.wait()
else:
# Check if output_path already exists as a file.
if os.path.isfile(self.output_path):
raise IOError(
"Output path %s already exists but is not a directory. Cowardly refusing to overwrite existing file."
% (self.output_path))
# Check if output_path already exists as a directory. Create if not.
if not os.path.isdir(self.output_path):
os.mkdir(self.output_path)
for i in range(self.parameters['number_of_trajectories']):
data_target = os.path.join(
os.path.abspath(self.output_path),
'pmi_out_%07d.h5' % (i))
command_string = 'cp %s %s' % (data_source, data_target)
proc = subprocess.Popen(command_string, shell=True)
proc.wait()
except:
status = 1
return status
def list_profiles(self, req):
"""
Displays all available profiles in list format.
``req``:
:class:`webob.Request` containing the environment information from
the request itself.
Returns a WSGI application.
"""
if 'enable' in req.params:
try:
if not os.path.exists(ENABLED_FLAG_FILE):
open(ENABLED_FLAG_FILE, 'w').close()
self.profiling_enabled = True
except IOError:
log.error("Unable to create %s to enable profiling" % os.abspath(ENABLED_FLAG_FILE))
raise
elif 'disable' in req.params:
try:
if os.path.exists(ENABLED_FLAG_FILE):
os.remove(ENABLED_FLAG_FILE)
self.profiling_enabled = False
except IOError:
log.error("Unable to delete %s to disable profiling" % os.path.abspath(ENABLED_FLAG_FILE))
raise
resp = Response(charset='utf8')
session_history = self._backend.get_all()
resp.unicode_body = self.get_template('list.tmpl').render_unicode(
history=session_history,
path=req.path,
profiling_enabled=self.profiling_enabled)
return resp
def fixdirs(self): if not os.path.isdir(self._path) or not os.path.exists(self._path): try: os.makedirs(self._path) except (OSError, IOError): self.path = os.abspath(os.getcwd()) return
def find_fastq_read_pairs(file_list):
"""
Given a list of file names, finds read pairs (based on _R1_/_R2_ file naming)
and returns a dict of {base_name: [ file_read_one, file_read_two ]}
Filters out files not ending with .fastq[.gz|.gzip|.bz2].
E.g.
P567_102_AAAAAA_L001_R1_001.fastq.gz
P567_102_AAAAAA_L001_R2_001.fastq.gz
becomes
{ "P567_102_AAAAAA_L001":
["P567_102_AAAAAA_L001_R1_001.fastq.gz",
"P567_102_AAAAAA_L001_R2_001.fastq.gz"] }
:param list file_list: A list of files in no particular order
:returns: A dict of file_basename -> [file1, file2]
:rtype: dict
"""
# We only want fastq files
pt = re.compile(".*\.(fastq|fq)(\.gz|\.gzip|\.bz2)?$")
file_list = filter(pt.match, file_list)
if not file_list:
# No files found
LOG.warn("No fastq files found.")
return {}
# --> This is the SciLifeLab-Sthlm-specific format (obsolete as of August 1st, hopefully)
# Format: <lane>_<date>_<flowcell>_<project-sample>_<read>.fastq.gz
# Example: 1_140220_AH8AMJADXX_P673_101_1.fastq.gz
# --> This is the standard Illumina/Uppsala format (and Sthlm -> August 1st 2014)
# Format: <sample_name>_<index>_<lane>_<read>_<group>.fastq.gz
# Example: NA10860_NR_TAAGGC_L005_R1_001.fastq.gz
suffix_pattern = re.compile(r'(.*)fastq')
# Cut off at the read group
file_format_pattern = re.compile(r'(.*)_(?:R\d|\d\.).*')
index_format_pattern = re.compile(r'(.*)_(?:I\d|\d\.).*')
matches_dict = collections.defaultdict(list)
for file_pathname in file_list:
file_basename = os.path.basename(file_pathname)
fc_id = os.path.dirname(file_pathname).split("_")[-1]
try:
# Check for a pair
pair_base = file_format_pattern.match(file_basename).groups()[0]
matches_dict["{}_{}".format(pair_base,
fc_id)].append(file_pathname)
except AttributeError:
#look for index file - 10Xgenomics case
index_file = index_format_pattern.match(file_basename).groups()[0]
if index_file:
matches_dict["{}_{}".format(index_file,
fc_id)].append(file_pathname)
else:
LOG.warn("Warning: file doesn't match expected file format, "
"cannot be paired: \"{}\"".format(file_pathname))
# File could not be paired, set by itself (?)
file_basename_stripsuffix = suffix_pattern.split(
file_basename)[0]
matches_dict[file_basename_stripsuffix].append(
os.abspath(file_pathname))
return dict(matches_dict)
def organize_files():
for entry in os.scandir():
if entry.is_dir():
continue
file_path = os.abspath(dir)
print file_path
file_ft = file_path.suffix.lower()
if file_ft in FILES:
directory_path = Path(FILES[file_ft])
directory_path.mkdir(exist_ok=True)
file_path.rename(directory_path.joinpath(file_path))
try:
os.mkdir("Others")
except:
pass
for dir in os.scandir():
try:
print dir
if dir.is_dir():
os.rmdir(dir)
else:
os.rename(os.getcwd() + '/' + str(Path(dir)), os.getcwd() + '/Others/' + str(Path(dir)))
except Exception, err:
print str(err)
pass
def get_structures(self, directory, extension='.cif'):
"""Utillity function that provides a list with all structures in a directory"""
return [
os.abspath(os.path.join(directory, structure))
for structure in os.listdir(directory)
if structure.endswith(extension)
]
def _list_outputs(self):
outputs = self.output_spec().get()
outfilenames = _gen_output_filenames(self.inputs.in_tensors_file, self.inputs.in_bval_file)
out_files = []
for item in outfilenames:
out_files.append(os.abspath(item))
outputs['out_files'] = out_files
return outputs
def setLogFile(self, filepath):
parsed_path = os.abspath(filepath)
# Checks if the provided log filename is in a real directory, and that
# the filename itself is not a directory.
if os.path.isdir(os.path.dirname(
parsed_path)) and not os.path.isdir(parsed_path):
self._log_file = parsed_path
else:
raise FileNotFoundError(filepath)
def getSchemaOrgTurtlePath():
if IS_LAMBDA:
fn_schema = "/tmp/schema.org.ttl"
if not os.path.exists(fn_schema):
app.logger.info("Refresh cache of schemaorg.ttl")
bucket = os.environ.get("resources_bucket", "sosov-data")
s3_client.download_file(bucket, "resources/data/schema.org.ttl", fn_schema)
return fn_schema
return os.abspath("resources/data/schema.org.ttl")
def find_fastq_read_pairs(file_list):
"""
Given a list of file names, finds read pairs (based on _R1_/_R2_ file naming)
and returns a dict of {base_name: [ file_read_one, file_read_two ]}
Filters out files not ending with .fastq[.gz|.gzip|.bz2].
E.g.
P567_102_AAAAAA_L001_R1_001.fastq.gz
P567_102_AAAAAA_L001_R2_001.fastq.gz
becomes
{ "P567_102_AAAAAA_L001":
["P567_102_AAAAAA_L001_R1_001.fastq.gz",
"P567_102_AAAAAA_L001_R2_001.fastq.gz"] }
:param list file_list: A list of files in no particular order
:returns: A dict of file_basename -> [file1, file2]
:rtype: dict
"""
# We only want fastq files
pt = re.compile(".*\.(fastq|fq)(\.gz|\.gzip|\.bz2)?$")
file_list = filter(pt.match, file_list)
if not file_list:
# No files found
LOG.warning("No fastq files found.")
return {}
# --> This is the SciLifeLab-Sthlm-specific format (obsolete as of August 1st, hopefully)
# Format: <lane>_<date>_<flowcell>_<project-sample>_<read>.fastq.gz
# Example: 1_140220_AH8AMJADXX_P673_101_1.fastq.gz
# --> This is the standard Illumina/Uppsala format (and Sthlm -> August 1st 2014)
# Format: <sample_name>_<index>_<lane>_<read>_<group>.fastq.gz
# Example: NA10860_NR_TAAGGC_L005_R1_001.fastq.gz
suffix_pattern = re.compile(r'(.*)fastq')
# Cut off at the read group
file_format_pattern = re.compile(r'(.*)_(?:R\d|\d\.).*')
index_format_pattern= re.compile(r'(.*)_(?:I\d|\d\.).*')
matches_dict = collections.defaultdict(list)
for file_pathname in file_list:
file_basename = os.path.basename(file_pathname)
fc_id = os.path.dirname(file_pathname).split("_")[-1]
try:
# Check for a pair
pair_base = file_format_pattern.match(file_basename).groups()[0]
matches_dict["{}_{}".format(pair_base,fc_id)].append(file_pathname)
except AttributeError:
#look for index file - 10Xgenomics case
index_file = index_format_pattern.match(file_basename).groups()[0]
if index_file:
matches_dict["{}_{}".format(index_file,fc_id)].append(file_pathname)
else:
LOG.warning("Warning: file doesn't match expected file format, "
"cannot be paired: \"{}\"".format(file_pathname))
# File could not be paired, set by itself (?)
file_basename_stripsuffix = suffix_pattern.split(file_basename)[0]
matches_dict[file_basename_stripsuffix].append(os.abspath(file_pathname))
return dict(matches_dict)
def pool_make_build_files(list_of_m61s,
cpus=cf.CPUS,
bool_insert_endpoint_markers=False):
# Build staging csv and build file from m61s
m61_ext = 'm61'
mod61_ext = 'mm61'
m61s = [
os.abspath(
glob.glob(
os.path.join(cf.data_files_dir,
'**/{}.{}'.format(j, m61_ext)))[0])
for j in list_of_m61s
]
mod_m61s = [
os.abspath(
glob.glob(
os.path.join(cf.data_files_dir,
'**/{}.{}'.format(j, mod61_ext)))[0])
for j in list_of_m61s
]
m61_files_to_process = m61s
m61_files_to_process.extend(mod_m61s)
for mod61 in mod_m61s:
tmp_mod61_basename = os.path.basename(mod61).split('.')[0]
for am61 in m61s:
tmp_m61_basename = os.path.basename(am61).split('.')[0]
if tmp_mod61_basename == tmp_m61_basename:
m61_files_to_process.remove(am61)
break
print('Processing m61 files...')
[print(os.path.basename(i)) for i in m61_files_to_process]
# Pool.starmap method accepts a sequence of argument tuples.
with multiprocessing.Pool(processes=cf.CPUS) as pool:
pool.starmap(production_make_build_file, m61_files_to_process)
def show_image_det_from_class(img,objects,type_names=None,ignored_type_names=None,occlusion=-1,truncation=-1,saveto=-1):
'''
(needs dataset class and object class from frustum-pointnets.)
show image with labels from objects,bbox,occlusion,truncation
:param img(ndarray):
:param objects(list of class): type,xmin,ymin,xmax,ymax,occlusion,truncation
:param type_names(tuple): like('Car','Pedestrian','Cyclist')
:param ignored_type_names(tuple): like ('DontCare')
:param occlusion(int): >0:show occlusion(0,1,2,3)
:param truncation(int): >0:show truncation(0~1)
:param saveto(str):str:save else: show
:return: None
'''
assert objects.type_names != None
for obj in objects:
if obj.type in type_names:
try:
cv2.rectangle(img, (int(obj.xmin),int(obj.ymin)),
(int(obj.xmax),int(obj.ymax)), (0,255,0), 1)
cv2.putText(img, obj.type[:3], (int(obj.xmin), int(obj.ymin - 15)), cv2.FONT_HERSHEY_DUPLEX, \
0.5, (0, 255, 0), 1)
except AttributeError:
print("No object.xmin/ymin/xmax/ymax/type(str)")
if occlusion>0:
try:
cv2.putText(img, 'o'+str(obj.occlusion), (int(obj.xmin), int(obj.ymin + 15)), cv2.FONT_HERSHEY_DUPLEX, \
0.5, (0, 255, 0), 1)
except AttributeError:
print("No object.occlusion but you set occlusion!=-1")
if truncation>0:
try:
cv2.putText(img, 't'+str(obj.truncation), (int(obj.xmin), int(obj.ymin)), cv2.FONT_HERSHEY_DUPLEX, \
0.5, (0, 255, 0), 1)
except AttributeError:
print("No object.occlusion but you set truncation!=-1")
elif obj.type in ignored_type_names:
cv2.rectangle(img, (int(obj.xmin),int(obj.ymin)),
(int(obj.xmax),int(obj.ymax)), (0,100,100), 1)
cv2.putText(img, 'ignored', (int(obj.xmin), int(obj.ymin - 15)), cv2.FONT_HERSHEY_DUPLEX, \
0.5, (0, 100, 100), 1)
if isinstance(saveto,str):
dir = os.abspath(os.dirname(saveto))
if not os.path.exists(dir):
os.makedirs(dir)
img.save(saveto)
else:
cv2.imshow(img)
cv2.waitKey(0)
def auto_config(self, config_source):
"""creates a dictionary of configuration parameters out of given path"""
config = None
print(os.path.abspath(os.path.dirname(__file__))+"\\"+default_config)
# fallback to default config if no file can be found
try:
config = self.load_config(config_source)
except IOError:
print("No configuration-file found. Using default-configuration.")
try:
config = self.load_config(os.path.dirname(os.abspath(__file__))+"/"+default_config)
except:
print("Someone messed with the default-configuration file. It cannot be found.")
else: return(config)
else: return(config)
def test(coverage):
"""Run the unit tests."""
if coverage and not os.environ.get('FLASK_COVERAGE'):
os.environ['FLASK_COVERAGE'] = 1
os.excvp(sys.executable, [sys.executable] + sys.argv)
import unittest
tests = unittest.TestLoader().discover('tests')
unittest.TextTestRunner(verbosity=2).run(tests)
if COV:
COV.stop()
COV.save()
print('Coverage Summary:')
COV.report()
basdir = os.abspath(os.path.dirname(__file__))
covdir = os.path.join(basdir, 'tmp/coverage')
COV.html_report(directory=covdir)
print('HTML version:file//%s/index.html' % covdir)
COV.erase()
def main():
global NUM_TESTS
global TEST_PERC
global BENCHMARK_PATH
global L2_PATH
global TIMEOUT_PATH
global OUT_DIR
global SPECS_DIR
args = docopt(__doc__)
random.seed(int(args['--seed']))
OUT_DIR = os.path.abspath(args['OUT_DIR'])
NUM_TESTS = int(args['--num-tests'])
TEST_PERC = float(args['--test-perc'])
SPECS_DIR = DEFAULT_SPECS_DIR
BENCHMARK_PATH = DEFAULT_BENCHMARK_PATH
if args['--l2-path'] is None:
L2_PATH = DEFAULT_L2_PATH
else:
L2_PATH = os.abspath(args['--l2-path'])
if args['--timeout-path'] is None:
if sys.platform == 'linux':
TIMEOUT_PATH = DEFAULT_TIMEOUT_PATH_PREFIX + '_linux.native'
elif sys.platform == 'darwin':
TIMEOUT_PATH = DEFAULT_TIMEOUT_PATH_PREFIX + '_osx.native'
else:
print('Unsupported system: {}'.format(sys.platform))
exit(-1)
else:
TIMEOUT_PATH = os.path.abspath(args['--timeout-path'])
if args['setup']:
setup()
elif args['write-costs']:
write_costs()
elif args['run']:
run()
elif args['benchmark']:
benchmark()
def get_directory_contents(dirname, sort_field=None):
"""The directory is joined with the CKEDITOR_UPLOAD_PATH.
A check is made not to go to directories below the CKEDITOR_UPLOAD_PATH.
"""
if dirname is None:
return None
# Make sure the CKEDITOR_UPLOAD_PATH exists
if not os.path.isdir(CKEDITOR_UPLOAD_PATH):
os.makedirs(CKEDITOR_UPLOAD_PATH)
# Join the CKEDITOR_UPLOAD_PATH and specified directory
full_dirname = os.path.join(settings.CKEDITOR_UPLOAD_PATH, dirname)
full_dirname = os.abspath(full_dirname) # remove attempts to move the path upwards
# If the directory doesn't exist, revert to the CKEDITOR_UPLOAD_PATH
if not os.path.isdir(full_dirname):
full_dirname = settings.CKEDITOR_UPLOAD_PATH
# array to hold directory contents
dir_contents = []
items = os.listdir(full_dirname)
items = filter(lambda x: not x.startswith('.'), items)
for item in items:
fullpath = os.path.join(full_dirname, item)
stats = os.stat(fullpath)
# strftime('%y%m%d',localtime(os.stat('thefile' )[ST_MTIME])
#print stats
if os.path.isfile(fullpath):
dli = DirListItem(item, DirListItem.TYPE_FILE, datetime.fromtimestamp(stats.st_mtime), fsize=stats.st_size )
elif os.path.isdir(fullpath):
dli = DirListItem(item, DirListItem.TYPE_DIR, datetime.fromtimestamp(stats.st_mtime), )
dir_contents.append(dli)
if sort_field is not None and sort_field.startswith('-'):
reverse_sort = True
sort_field = sort_field[1:]
else:
reverse_sort = False
if sort_field in DirListItem.ATTRS:
dir_contents.sort(key=lambda obj: eval('obj.%s' % sort_field), reverse=reverse_sort)
return dir_contents
def __in_place_compress(self, files):
"""Compress the file ``in-place''
- It is better to use here ``os.system'' or ``popen''-family,
but it does not work properly for multiprocessing environemnt
"""
output = self.nominal_dbname
out, _ = os.path.split(output)
outdir = out if out else '.'
assert os.access ( outdir , os.W_OK ) ,\
'The directory "%s" is not writeable!' % os.abspath ( outdir )
#
# compress the file
compressed = self.compress_files(files)
# remove input files
for f in files:
try:
os.remove(f)
except OSError:
pass
shutil.move(compressed, output)
def ensureDirExists(path):
# check if an s3 path (starts with s3://
if path.startswith("s3://"):
# handle as s3 path
return ensureS3BucketExists(path)
elif os.path.isdir(path):
# local path and exists
return True
elif os.path.exists(path):
logMessage("Error", "path (" + path + ") exists but is not directory")
return False
else:
# create local path for the first time
os.makedirs(os.abspath(path))
if os.path.isdir(path):
return True
else:
logMessage(
"ERROR",
"Tried to create dir (" + path + ") but didn't seem to work")
return False
def get_path(self):
''' determined based on OS, can be set on instance
'''
if not self._path:
if os.name in ('posix'):
rundir = '/run/'
elif os.name in ('mac', 'os2', 'ce', 'riscos'):
rundir = '/var/run/'
elif os.name == 'nt':
if self.caller is not None:
rundir = os.path.join(os.path.dirname(self.caller.__file__), '/run/')
else:
rundir = os.path.join(os.path.dirname(__file__), '/run/')
else:
rundir = os.getcwd()
self._path = os.path.abspath(rundir)
if not os.path.isdir(self._path) or not os.path.exists(self._path):
try:
os.makedirs(self._path)
except (OSError, IOError):
self._path = os.abspath(os.getcwd())
return self._path
def main(args):
logging.basicConfig(level=logging.DEBUG,
format="\n%(levelname)s:\t%(message)s")
logger = logging.getLogger()
output_folder = args['output_folder'] + '_' + os.path.basename(
args['fastq_reads']).split(".")[0]
args['fastq_reads'] = os.abspath(args['fastq_reads'])
if not os.path.isdir(output_folder): os.mkdir(output_folder)
logger.info("Saving run info to output folder...")
write_run_info(args, output_folder)
logger.info("Building the insertion sequence indices...")
bowtie2.build('2.2.9', args['insertion_sequence_fasta'])
logger.info("Aligning the fastq file to the insertion sequences...")
sam_file_loc = bowtie2.align('2.2.9',
args['insertion_sequence_fasta'],
args['fastq_reads'],
output_folder,
threads=args['threads'])
read_filter = filters.Filter(args['fastq_reads'],
args['classification_file'],
args['taxon_nodes'],
logger_in=logger)
logger.info("Invoking the Jansen Protocol...")
taxon_total_count, taxon_IS_count, potential_transfers, intra_IS = read_filter.filter_reads_ISCounter2(
sam_file_loc)
logger.info("Saving results to file... ")
out_file = save_summary_stats(args['fastq_reads'], taxon_total_count,
taxon_IS_count, potential_transfers,
intra_IS, output_folder)
logger.info("Results saved to %s" % out_file)
logger.info("Analysis Complete :)")
def list_profiles(self, req):
"""
Displays all available profiles in list format.
``req``:
:class:`webob.Request` containing the environment information from
the request itself.
Returns a WSGI application.
"""
if 'enable' in req.params:
try:
if not os.path.exists(ENABLED_FLAG_FILE):
open(ENABLED_FLAG_FILE, 'w').close()
self.profiling_enabled = True
except IOError:
log.error("Unable to create %s to enable profiling" %
os.abspath(ENABLED_FLAG_FILE))
raise
elif 'disable' in req.params:
try:
if os.path.exists(ENABLED_FLAG_FILE):
os.remove(ENABLED_FLAG_FILE)
self.profiling_enabled = False
except IOError:
log.error("Unable to delete %s to disable profiling" %
os.path.abspath(ENABLED_FLAG_FILE))
raise
resp = Response(charset='utf8')
session_history = self._backend.get_all()
resp.unicode_body = self.get_template('list.tmpl').render_unicode(
history=session_history,
path=req.path,
profiling_enabled=self.profiling_enabled)
return resp
def get_cwd():
filename = sys.argv[0]
return os.dirname(os.abspath(os.expanduser(filename)))
from os import abspath, dirname _CWD = dirname(abspath(__file__))
# Just sketch
import os, sys
CONFIG_FILE = os.path.join(os.abspath(os.dirname(__file__)), "../config.yaml")
def get_config_variable(name):
""" Retrieve variable name from configuration """
pass
variable_config = {
"num_workers":6, # Should speed up data fetching on a multi-CPU machine
"activation": "elu",
"batch_size": 32,
"bidir": True,
"dropout_layers": [
0.5
],
"embed_dim": 200,
"include_metadata": False,
"linear_layer_sizes": [
1000
],
"lr": 0.0001,
"max_len": 512,
"modelpath": os.abspath(os.path.join(bpe_models_dir, "attrib_1000.model")),
"num_classes": 1314,
"num_lstm_hidden": 128,
"num_lstm_layers": 2,
"other_features_size": 39,
"other_linear_depth": 2,
"vocab_size": 1000
}
full_config = {**params, **variable_config}
# This uses the exposed ray trainable interface without the ray garbage
trainable = mytorch.RaylessTrainable(
full_config,
mytorch.myLSTM,
# There's a hand code dir in this subdir, cd into it
try:
os.chdir(hc_dir)
except:
# Maybe subdirs is stale?
print("Could not access dir: {} Skipping.".format(subsys +
os.sep +
hc_dir))
continue
# Assert: In project_dir/subsystem_dir/knit_dir
for hand_code_filename in glob.glob(_GLOB_SUFFIX):
print(" Knitting: " + hand_code_filename)
# The target gen'd file will have the same name in the parent dir
gen_filename = os.pardir + os.sep + hand_code_filename
# Read all the hand code and break into sections
read_hand_code(hand_code_filename)
# Splice in each section into the designated location in the gen file
splice_hand_code(gen_filename)
try:
os.chdir(os.pardir) # pop back up into the subsys dir
except:
raise mi_Error(
"Could not return to parent dir: {} Abort.".format(
os.abspath(subsys)))
def resource_path(relative_path):
if hasattr(sys, "_MEIPASS"):
base_path = sys._MEIPASS
else:
base_path = os.abspath(".")
return os.path.join(base_path, relative_path)
model_params['backprop'] = False
base = mytorch.myLSTMOutputHidden(model_params)
base.load_state_dict(model_stuff['state_dict'], strict=False)
model = nn.Sequential(
base,
nn.Linear(model_params['linear_layer_sizes'][-1] + 39,
model_params['linear_layer_sizes'][-1]),
nn.ELU(),
nn.Dropout(),
nn.Linear(model_params['linear_layer_sizes'][-1], 1314),
)
model.to(device)
train_loader, val_loader = mytorch.get_attrib_bpe_data(
model_params['batch_size'],
modelpath=os.abspath(os.path.join(bpe_models_dir, 'attrib_1000.model')),
num_workers=4)
loss_func = model_stuff['loss_func']
optim = torch.optim.Adam(model.parameters(), lr=.0001)
components = model, loss_func, optim, train_loader, val_loader
# I will do jank score logging in this case
global_step = 0
logfile = os.path.join(logpath, "logs.csv")
with open(logfile, "w+") as f:
f.write(f"global_step,train_loss,train_accuracy,val_loss,val_accuracy\n")
try:
i = 0
while True:
train_loss, train_accuracy, val_loss, val_accuracy, global_step = mytorch.fit(
def set_download_dir(self, dl_dir):
self.download_dir = os.abspath(dl_dir)
import sys, os
print ('sys.argv[0] = ', sys.argv[0])
pathname = os.path.dirname(sys.argv[0])
print ('path = ', pathname)
print ('full path =', os.abspath(pathname))
def __str__(self):
print "self.type = " + self.type
if self.type == Repository.LOCAL_REPOSITORY:
return "\"file://" + os.abspath( self.path ) + "\""
elif self.type == Repository.REMOTE_REPOSITORY:
return "%s %s %s" % (self.url, self.dist, self.component)
if USE_WINDOWS:
# Try to add some commonly needed paths to PATH
paths = os.environ.get('PATH', '').split(os.path.pathsep)
program_files = os.environ.get('PROGRAMFILES')
if program_files:
# Guess some paths
paths += glob.glob(os.path.join(program_files, 'gs/gs*/bin'))
paths += glob.glob(os.path.join(program_files, 'pstoedit*'))
paths += glob.glob(os.path.join(program_files, 'miktex*/miktex/bin'))
# FIXME: a better solution would be to look them up from the registry
# The path where Inkscape is likely to be
paths += [os.path.join(os.abspath(os.dirname(sys.argv[0])), '..', '..')]
# Set the paths
os.environ['PATH'] = os.path.pathsep.join(paths)
class ConvertInfo(object):
def __init__(self):
self.text = None
self.preamble_file = None
self.page_width = None
self.scale_factor = None
self.has_node = False
self.text_to_path = False
self.selected_converter = None
import sys
import os
import unittest
tests_path = os.path.dirname(__file__)
root = os.abspath(os.path.join(tests_path, '..'))
sys.path.insert(0, root)
import pygrid
def create_job(jobname):
_job = pygrid.
return
class CommandJobTest(unittest.TestCase):
def test(self):
self.assertEqual(fun(3), 4)
def getGeneInfoList():
print("connected to flask server")
geneInfo = os.abspath("../database/preprocessing/gene_information.csv")
geneInfoDf = pd.read_csv(geneInfo)
uidList = list(df["uid"].astype("int").values)
return uidList
def ignoref(p, files):
return (f for f in files if os.abspath(os.path.join(p, f)) == path)
# Run to find code for importing ScreenKit
__version__ = 0.1
RELEASE = 0.1
import sys
import os
print('import sys\nsys.path.insert(0,' +
str(os.dirname(os.abspath(__file__))) + ')')
from os import join, abspath, curdir code_file = open(join(abspath(curdir), 'auth_code.txt'), 'r') spotify_token = code_file.read() spotify_user_id = "sinistersandwich" # Recent Song Documentation: https://developer.spotify.com/documentation/web-api/reference/player/get-recently-played/
def get_full_filepath(filename):
""" Returns a tuple of the path and the full pathname of the given
filename. """
pathname = os.path.dirname(filename)
return ('filename = ' + filename, 'path = ' + pathname, \
'full path = ' + os.abspath(pathname))
model_params = model_stuff['params']
model_params['my_device'] = device
model_params['backprop'] = True
base = mytorch.myLSTMOutputHidden(model_params)
model = nn.Sequential(base,
nn.Linear(model_params['linear_layer_sizes'][-1] + 39, model_params['linear_layer_sizes'][-1]),
nn.ELU(),
nn.Dropout(),
nn.Linear(model_params['linear_layer_sizes'][-1], 1314),
)
model.load_state_dict(model_stuff['state_dict'])
model.to(device)
train_loader, val_loader = mytorch.get_attrib_bpe_data(model_params['batch_size'], modelpath=os.abspath(os.path.join(bpe_models_dir,'attrib_1000.model')), num_workers=4)
loss_func = F.cross_entropy
optim = torch.optim.Adam(model.parameters(),lr=.00005)
components = model, loss_func, optim, train_loader, val_loader
# I will do jank score logging in this case
global_step = 0
logfile = os.path.join(logpath, "logs.csv")
with open(logfile, "w+") as f:
f.write(f"global_step,train_loss,train_accuracy,val_loss,val_accuracy\n")
try:
i = 0
while True:
train_loss, train_accuracy, val_loss, val_accuracy, global_step = mytorch.fit(
# There's a hand code dir in this subdir, cd into it
try:
os.chdir( hc_dir )
except:
# Maybe subdirs is stale?
print( "Could not access dir: {} Skipping.".format(
subsys + os.sep + hc_dir
) )
continue
# Assert: In project_dir/subsystem_dir/knit_dir
for hand_code_filename in glob.glob( _GLOB_SUFFIX ):
print(" Knitting: " + hand_code_filename )
# The target gen'd file will have the same name in the parent dir
gen_filename = os.pardir + os.sep + hand_code_filename
# Read all the hand code and break into sections
read_hand_code( hand_code_filename )
# Splice in each section into the designated location in the gen file
splice_hand_code( gen_filename )
try:
os.chdir( os.pardir ) # pop back up into the subsys dir
except:
raise mi_Error( "Could not return to parent dir: {} Abort.".format(
os.abspath(subsys)
) )
'-c',
'--classification_file',
required=True,
help=
'A tab-separated file where the first column is the read title and the second'
'column is the assigned taxon id')
parser.add_argument(
'-nodes',
'--taxon_nodes',
required=False,
type=list,
default=[
os.path.abspath(
os.path.join(data_dir, "TaxonomyDatabase/nodes.dmp")),
os.abspath(os.path.join(data_dir, "TaxonomyDatabase/merged.dmp"))
],
help='Location of the NCBI Taxonomy Database nodes.txt file',
nargs='*')
parser.add_argument(
'-is',
'--insertion_sequence_fasta',
required=False,
type=str,
default=os.path.join(data_dir, "IS_fastas/Bacteroides_all.fasta"),
help='A fasta file containing the insertion sequences of interest,'
' concatenated sequentially in any order.')
parser.add_argument('-o',
'--output_folder',
def get_attachment(self, token, filename):
attach = self.db.get_attachment(token, filename).read()
with open(filename, 'w') as f:
for line in attach:
f.write(line)
return os.abspath(filename)
from pastebin_python import PastebinPython
from pastebin_python.pastebin_exceptions import *
from pastebin_python.pastebin_constants import *
from pastebin_python.pastebin_formats import *
pbin = PastebinPython(api_dev_key='###---YOUR API KEY HERE---###')
"""
###--NOT IMPLEMENTED IN BASE LOGGER---###
Debug = False
DBG = False
VM = False
name = sys.argv[0]
location = os.abspath(name)
"""
We prepare a keymap to utilize with the
ctypes module in order to log keystrokes
"""
VKStr = {}
VKStr[0x01] = "LEFT_MOUSEE"
VKStr[0x02] = "RIGHT_MOUSE"
VKStr[0x03] = "MIDDLE_MOUSE"
VKStr[0x08] = "BACKSPACE"
VKStr[0x09] = "TAB"
VKStr[0x0D] = "ENTER"
VKStr[0x10] = "SHIFT"
VKStr[0x11] = "CTRL"
VKStr[0x12] = "ALT"
def _delete_file(path: str) -> None:
""" deletes the file at given path.
"""
os.remove(os.abspath(path))
