def test_dataReceivedAfterRecovery():
h="""
Egy szerver ujraeledese utan ra kell tolteni a kihagyott adatokat
Egy szenzornak megadunk ket szervert.
A main szerver leallasa utan a szenzor a backup szervernek kuldi az adatokat.
A main szerver feleledese utan meg kell kapnia a kimaradt adatokat.
"""
print(h)
mainServer = StorageServer(alive=True, id=1)
backupServer = StorageServer(alive=True, id=2)
mainServer.add_neighbour_server(backupServer)
backupServer.add_neighbour_server(mainServer)
s_id = 10
sensor = Sensor(id=s_id, servers=[mainServer, backupServer])
data_1 = Data("data_1 to mainServer")
sensor.send_data(data=data_1)
assert(data_1 in mainServer.data[s_id])
assert(backupServer.data == {})
#mainServer leallitasa
mainServer.change_alive_state(False)
data_2 = Data("data_2 during main down")
sensor.send_data(data=data_2)
assert(data_2 not in mainServer.data[s_id])
assert(data_2 in backupServer.dead_servers_data[1][s_id])
#main feleled
mainServer.change_alive_state(True)
assert(data_2 in mainServer.data[s_id])
def test_MultipleServersDown():
h = """
A fo szerver mellett, mar mukodes kozben megjelenik egy masik szerver.
A fo szerver ezutan meghal, ekkor a masiknak kell atvennie a helyet.
A fo szerver feleledese utan meg kell kapnia az adatokat az uj szervertol.
Ezutan az uj szerver all le, ekkor a fonek kell begyujtenie a keletkezett adatokat.
"""
print(h)
mainServer = StorageServer(alive=True, id=1001)
s_id = 9001
s2_id = 9002
sensor = Sensor(id=s_id, servers=[])
mainServer.add_sensor(sensor)
data_1 = Data("data_1")
sensor.send_data(data=data_1)
assert (data_1 in mainServer.data[s_id])
newServer = StorageServer(alive=True, id=1002)
newServer.add_neighbour_server(mainServer)
mainServer.add_neighbour_server(newServer)
# mainServer leallitasa
mainServer.change_alive_state(False)
data_2 = Data("data_2 during main down")
sensor.send_data(data=data_2)
assert (data_2 not in mainServer.data[s_id])
assert (data_2 in newServer.dead_servers_data[1001][s_id])
# main feleled
mainServer.change_alive_state(True)
assert (data_2 in mainServer.data[s_id])
# uj szerver is kap szenzort
sensor2 = Sensor(s2_id, servers=[])
newServer.add_sensor(sensor2)
data_3 = Data('data for new server')
sensor2.send_data(data_3)
assert (data_3 in newServer.data[s2_id])
assert (data_3 in mainServer.other_data[1002][s2_id])
# uj szerver is leall
newServer.change_alive_state(False)
data_4 = Data('data during new sever dead')
sensor2.send_data(data_4)
assert (data_4 not in newServer.data[s2_id])
assert (data_4 in mainServer.dead_servers_data[1002][s2_id])
# uj szerver feleled
newServer.change_alive_state(True)
assert (data_4 in newServer.data[s2_id])
def test_replicas():
h = """
Masolatok keszitesenek ellenorzese
Letrehozunk 4 db szervert, az egyikhez hozzaadunk 1 szenzort.
A szenzor altal alkuldott adatnak a sajat szervere mellett ket masik szerveren kell megjelennie
"""
print(h)
server1 = StorageServer(alive=True, id=1001)
server2 = StorageServer(alive=True, id=1002)
server3 = StorageServer(alive=True, id=1003)
server4 = StorageServer(alive=True, id=1004)
sensor1 = Sensor(9001, servers=[])
# most nincs full mesh, csak server1 van mindenkivel osszekotve
server1.add_neighbour_server(server2)
server2.add_neighbour_server(server1)
server1.add_neighbour_server(server3)
server3.add_neighbour_server(server1)
server1.add_neighbour_server(server4)
server4.add_neighbour_server(server1)
server1.add_sensor(sensor1)
#sensor1.redefine_servers([server1, server2, server3, server4])
assert (len(sensor1.servers) == 4 and sensor1.servers[0] == server1)
data = Data('simple_test_data')
sensor1.send_data(data)
print('Server1 data:', server1.data)
assert (len(server1.data) == 1)
print('Server2 replicas:', server2.other_data)
assert (server2.other_data[1001][9001][0].data[1] == 'simple_test_data')
print('Server3 replicas:', server3.other_data)
assert (server3.other_data[1001][9001][0].data[1] == 'simple_test_data')
print('Server4 replicas:', server4.other_data)
assert (server4.other_data == {} or NUM_REPLICAS != 2)
print('Test ok')
def test_dataSending():
h="""
Adatkuldes ellenorzese.
Letrehozunk egy szervert es hozzaadunk egy szenzort.
A szenzor elkuld egy adatot; ellenorizzuk, hogy a szerverre megerkezett-e.
"""
print(h)
server1 = StorageServer(alive=True, id=1001)
sensor1 = Sensor(9001, servers=[])
server1.add_sensor(sensor1)
sensor1.redefine_servers([server1])
data = Data('simple_test_data')
#server1.receive_data('testdata', sensor1.id)
sensor1.send_data(data)
print('Server1 data:', server1.data)
assert(len(server1.data) == 1)
print('Test ok')
def test_serverDown():
h="""
Szerver leallas ellenorzese.
Egy szenzornak megadunk ket szervert.
Ha a main szerver leall, akkor a szenzor a backup szervernek kuldi az adatot.
"""
print(h)
mainServer = StorageServer(alive=True, id=1)
backupServer = StorageServer(alive=True, id=2)
s_id = 10
sensor = Sensor(id=s_id, servers=[mainServer, backupServer])
#adat kuldese a fo szervernek
data_1 = Data("data_1 to mainServer")
sensor.send_data(data=data_1)
assert(data_1 in mainServer.data[s_id])
assert(backupServer.data == {})
#mainServer leallitasa
data_2 = Data("data_2 to backupServer")
mainServer.alive = False
sensor.send_data(data=data_2)
assert(data_2 not in mainServer.data[s_id])
assert(data_2 in backupServer.dead_servers_data[1][s_id])
#mainServer feleled
data_3 = Data("data_3 to mainServer")
mainServer.alive = True
sensor.send_data(data=data_3)
assert(data_3 in mainServer.data[s_id])
assert(data_3 not in backupServer.dead_servers_data[1][s_id])
#ha egyik szerver sem kapja meg akkor kivetelt dob
mainServer.alive = False
backupServer.alive = False
data_4 = Data("data_cannot_be_sent")
ok = False
try:
sensor.send_data(data_4)
except:
ok = True
assert(ok)
print("Test ok")
def test_MultipleServersDown():
h = """
A fo es az egyik backup szerver is inaktivva valik.
A fo szerver feleledese utan igy is meg kell kapnia a kiesett adatokat.
"""
print(h)
mainServer = StorageServer(alive=True, id=1001)
backupServer1 = StorageServer(alive=True, id=1002)
backupServer2 = StorageServer(alive=True, id=1003)
mainServer.add_neighbour_server(backupServer1)
backupServer1.add_neighbour_server(mainServer)
mainServer.add_neighbour_server(backupServer2)
backupServer2.add_neighbour_server(mainServer)
backupServer1.add_neighbour_server(backupServer2)
backupServer2.add_neighbour_server(backupServer1)
s_id = 9001
sensor = Sensor(id=s_id, servers=[])
mainServer.add_sensor(sensor)
data_1 = Data("data_1")
sensor.send_data(data=data_1)
assert (data_1 in mainServer.data[s_id])
assert (backupServer1.data == {})
#mainServer leallitasa
mainServer.change_alive_state(False)
data_2 = Data("data_2 during main down")
sensor.send_data(data=data_2)
print('BS1 dead:', backupServer1.dead_servers_data)
print('BS2 other:', backupServer2.other_data)
assert (data_2 not in mainServer.data[s_id])
assert (data_2 in backupServer1.dead_servers_data[1001][s_id])
assert (data_2 in backupServer2.other_data[1001][s_id])
# backup1 szerver leall
backupServer1.change_alive_state(False)
data_3 = Data('data_3 two servers down')
sensor.send_data(data_3)
assert (data_3 not in mainServer.data[s_id])
assert (data_3 not in backupServer1.dead_servers_data[1001][s_id])
assert (data_3 in backupServer2.dead_servers_data[1001][s_id])
#main es backup feleled
mainServer.change_alive_state(True)
backupServer1.change_alive_state(True)
assert (data_2 in mainServer.data[s_id])
assert (data_3 in mainServer.data[s_id])
def test_log():
h = """
Szerverek es szenzorok logolasanak tesztelese
"""
print(h)
if not LOGGING_ENABLED:
print(
"Logolas ki van kapcsolva a config file-ban, a teszt futtatasahoz be kell kapcsolni"
)
assert (LOGGING_ENABLED)
# stdout atallitasa
captureOutput = StringIO()
sys.stdout = captureOutput
expected = []
# logolas:
mainServerID = 1000
mainServer = StorageServer(alive=True, id=mainServerID)
sensorID = mainServerID + 1
sensor = Sensor(id=sensorID, servers=[])
mainServer.add_sensor(sensor=sensor)
expected.append("Server " + str(mainServerID) + ": Sensor added: " +
str(sensor))
neighbourServerID = 2000
neighbourServer = StorageServer(alive=True, id=neighbourServerID)
mainServer.add_neighbour_server(neighbourServer)
expected.append("Sensor " + str(sensorID) + ": New server list: " +
str(sensor.servers))
expected.append("Server " + str(mainServerID) +
": Neighbour server added: " + str(neighbourServer))
data_ = "Data sent from sensor to own server"
msg = Message(sensor_id=sensorID,
server_id=mainServerID,
content=data_,
is_replica=None)
sensor.send_data(data=data_)
expected.append("Sensor " + str(sensorID) + ": Sending data " + data_ +
" to " + str(mainServer))
expected.append("Server " + str(mainServerID) + ": Received own data " +
str(msg))
msg.is_replica = True
expected.append("Server " + str(neighbourServerID) +
": Received other data " + str(msg))
mainServer.change_alive_state(alive=False)
expected.append("Server " + str(mainServerID) +
": Alive state changed to False")
data_dead = "sending data to dead server"
sensor.send_data(data_dead)
msg_dead = Message(sensor_id=sensorID,
server_id=mainServerID,
content=data_dead,
is_replica=None)
expected.append("Server " + str(neighbourServerID) +
": Received dead data " + str(msg_dead))
mainServer.change_alive_state(False)
neighbourServer.change_alive_state(False)
data_notsent = "Data is unable to send"
try:
sensor.send_data(data_notsent)
except:
print("exception")
expected.append("Sensor " + str(sensorID) + ": Sending was unsuccessful.")
expected.append("Sensor " + str(sensorID) +
": Could not send data to any server.")
# stdout visszaallitas
sys.stdout = sys.__stdout__
for expect in expected:
if (expect not in captureOutput.getvalue()):
print(expect)
assert (expect in captureOutput.getvalue())