def setupLights(self): #This function sets up some default lighting lAttrib = LightAttrib.makeAllOff() ambientLight = AmbientLight( "ambientLight" ) ambientLight.setColor( Vec4(.8, .8, .8, 1) ) lAttrib = lAttrib.addLight( ambientLight ) directionalLight = DirectionalLight( "directionalLight" ) directionalLight.setDirection( Vec3( 0, 45, -45 ) ) directionalLight.setColor( Vec4( 0.2, 0.2, 0.2, 1 ) ) lAttrib = lAttrib.addLight( directionalLight ) render.attachNewNode( directionalLight ) render.attachNewNode( ambientLight ) render.node().setAttrib( lAttrib )
def setupLights(self): #Sets up some default lighting lAttrib = LightAttrib.makeAllOff() ambientLight = AmbientLight( "ambientLight" ) ambientLight.setColor( Vec4(.4, .4, .35, 1) ) lAttrib = lAttrib.addLight( ambientLight ) directionalLight = DirectionalLight( "directionalLight" ) directionalLight.setDirection( Vec3( 0, 8, -2.5 ) ) directionalLight.setColor( Vec4( 0.9, 0.8, 0.9, 1 ) ) lAttrib = lAttrib.addLight( directionalLight ) render.attachNewNode( directionalLight ) render.attachNewNode( ambientLight ) render.node().setAttrib( lAttrib )
def setupLights(self):
lAttrib = LightAttrib.makeAllOff()
ambientLight = AmbientLight("ambientLight")
ambientLight.setColor(Vec4(.8, .8, .75, 1))
lAttrib = lAttrib.addLight(ambientLight)
directionalLight = DirectionalLight("directionalLight")
directionalLight.setDirection(Vec3(0, 0, -2.5))
directionalLight.setColor(Vec4(0.9, 0.8, 0.9, 1))
lAttrib = lAttrib.addLight(directionalLight)
render.attachNewNode(directionalLight)
render.attachNewNode(ambientLight)
render.node().setAttrib(lAttrib)
def setupLights(self):
lAttrib = LightAttrib.makeAllOff()
ambientLight = AmbientLight("ambientLight")
ambientLight.setColor(Vec4(0.8, 0.8, 0.75, 1))
lAttrib = lAttrib.addLight(ambientLight)
directionalLight = DirectionalLight("directionalLight")
directionalLight.setDirection(Vec3(0, 0, -2.5))
directionalLight.setColor(Vec4(0.9, 0.8, 0.9, 1))
lAttrib = lAttrib.addLight(directionalLight)
render.attachNewNode(directionalLight)
render.attachNewNode(ambientLight)
render.node().setAttrib(lAttrib)
def setupLights(self):
lAttrib = LightAttrib.makeAllOff()
ambientLight = AmbientLight( "ambientLight" )
ambientLight.setColor( Vec4(.4, .4, .35, 1) )
lAttrib = lAttrib.addLight( ambientLight )
directionalLight = DirectionalLight( "directionalLight" )
directionalLight.setDirection( Vec3( 0, 8, -2.5 ) )
directionalLight.setColor( Vec4( 0.9, 0.8, 0.9, 1 ) )
lAttrib = lAttrib.addLight( directionalLight )
#set lighting on teapot so steam doesn't get affected
self.t.attachNewNode( directionalLight )
self.t.attachNewNode( ambientLight )
self.t.node().setAttrib( lAttrib )
def setupLights(self):
lAttrib = LightAttrib.makeAllOff()
ambientLight = AmbientLight("ambientLight")
ambientLight.setColor(Vec4(.4, .4, .35, 1))
lAttrib = lAttrib.addLight(ambientLight)
directionalLight = DirectionalLight("directionalLight")
directionalLight.setDirection(Vec3(0, 8, -2.5))
directionalLight.setColor(Vec4(0.9, 0.8, 0.9, 1))
lAttrib = lAttrib.addLight(directionalLight)
#set lighting on teapot so steam doesn't get affected
self.t.attachNewNode(directionalLight)
self.t.attachNewNode(ambientLight)
self.t.node().setAttrib(lAttrib)
def setupLights(self):
#Create some lights and add them to the scene. By setting the lights on
#render they affect the entire scene
#Check out the lighting tutorial for more information on lights
lAttrib = LightAttrib.makeAllOff()
ambientLight = AmbientLight("ambientLight")
ambientLight.setColor(Vec4(.4, .4, .35, 1))
lAttrib = lAttrib.addLight(ambientLight)
directionalLight = DirectionalLight("directionalLight")
directionalLight.setDirection(Vec3(0, 8, -2.5))
directionalLight.setColor(Vec4(0.9, 0.8, 0.9, 1))
lAttrib = lAttrib.addLight(directionalLight)
render.attachNewNode(directionalLight)
render.attachNewNode(ambientLight)
render.node().setAttrib(lAttrib)
#Explicitly set the environment to not be lit
lAttrib = LightAttrib.makeAllOff()
self.env.node().setAttrib(lAttrib)
def setupLights(self):
#Create some lights and add them to the scene. By setting the lights on
#render they affect the entire scene
#Check out the lighting tutorial for more information on lights
lAttrib = LightAttrib.makeAllOff()
ambientLight = AmbientLight( "ambientLight" )
ambientLight.setColor( Vec4(.4, .4, .35, 1) )
lAttrib = lAttrib.addLight( ambientLight )
directionalLight = DirectionalLight( "directionalLight" )
directionalLight.setDirection( Vec3( 0, 8, -2.5 ) )
directionalLight.setColor( Vec4( 0.9, 0.8, 0.9, 1 ) )
lAttrib = lAttrib.addLight( directionalLight )
render.attachNewNode( directionalLight )
render.attachNewNode( ambientLight )
render.node().setAttrib( lAttrib )
#Explicitly set the environment to not be lit
lAttrib = LightAttrib.makeAllOff()
self.env.node().setAttrib( lAttrib )
if numIterations%3==0:
#decrease dimensions when we branch
length=Vec3(length.getX()/2, length.getY()/2, length.getZ()/1.1)
for i in range(numCopies):
makeFractalTree(bodydata, nodePath,length,newPos, numIterations-1, numCopies,randomAxis(vecList))
else:
#just make another branch connected to this one with a small variation in direction
makeFractalTree(bodydata, nodePath,length,newPos, numIterations-1,numCopies,smallRandomAxis(vecList))
else:
drawBody(nodePath,bodydata, pos, vecList, length.getX(),False)
drawLeaf(nodePath,bodydata, pos,vecList)
alight = AmbientLight('alight')
alight.setColor(Vec4(0.5, 0.5, 0.5, 1))
alnp = render.attachNewNode(alight)
render.setLight(alnp)
slight = Spotlight('slight')
slight.setColor(Vec4(1, 1, 1, 1))
lens = PerspectiveLens()
slight.setLens(lens)
slnp = render.attachNewNode(slight.upcastToLensNode())
render.setLight(slnp)
slnp.setPos(0, 0,40)
#rotating light to show that normals are calculated correctly
def updateLight(task):
def __init__(self):
# Post the instructions.
self.title = addTitle("Panda3D: Tutorial - Using Render-to-Texture")
self.inst1 = addInstructions(0.95,"ESC: Quit")
self.inst2 = addInstructions(0.90,"Up/Down: Zoom in/out on the Teapot")
self.inst3 = addInstructions(0.85,"Left/Right: Move teapot left/right")
self.inst4 = addInstructions(0.80,"V: View the render-to-texture results")
#we get a handle to the default window
mainWindow=base.win
#we now get buffer thats going to hold the texture of our new scene
altBuffer=mainWindow.makeTextureBuffer("hello", 256, 256)
#now we have to setup a new scene graph to make this scene
altRender=NodePath("new render")
#this takes care of setting up ther camera properly
self.altCam=base.makeCamera(altBuffer)
self.altCam.reparentTo(altRender)
self.altCam.setPos(0,-10,0)
#get the teapot and rotates it for a simple animation
self.teapot=loader.loadModel('models/teapot')
self.teapot.reparentTo(altRender)
self.teapot.setPos(0,0,-1)
self.teapot.hprInterval(1.5,Point3(360,360,360)).loop()
#put some lighting on the teapot
dlight = DirectionalLight('dlight')
alight = AmbientLight('alight')
dlnp = altRender.attachNewNode(dlight)
alnp = altRender.attachNewNode(alight)
dlight.setColor(Vec4(0.8, 0.8, 0.5, 1))
alight.setColor(Vec4(0.2, 0.2, 0.2, 1))
dlnp.setHpr(0, -60, 0)
altRender.setLight(dlnp)
altRender.setLight(alnp)
# Panda contains a built-in viewer that lets you view the results of
# your render-to-texture operations. This code configures the viewer.
self.accept("v", base.bufferViewer.toggleEnable)
self.accept("V", base.bufferViewer.toggleEnable)
base.bufferViewer.setPosition("llcorner")
base.bufferViewer.setCardSize(1.0, 0.0)
# Create the tv-men. Each TV-man will display the
# offscreen-texture on his TV screen.
self.tvMen = []
self.makeTvMan(-5,30, 1,altBuffer.getTexture(),0.9)
self.makeTvMan( 5,30, 1,altBuffer.getTexture(),1.4)
self.makeTvMan( 0,23,-3,altBuffer.getTexture(),2.0)
self.makeTvMan(-5,20,-6,altBuffer.getTexture(),1.1)
self.makeTvMan( 5,18,-5,altBuffer.getTexture(),1.7)
self.accept("escape", sys.exit, [0])
self.accept("arrow_up", self.zoomIn)
self.accept("arrow_down", self.zoomOut)
self.accept("arrow_left", self.moveLeft)
self.accept("arrow_right", self.moveRight)
def __init__(self):
base.disableMouse()
base.cam.node().getLens().setNear(10.0)
base.cam.node().getLens().setFar(200.0)
camera.setPos(0, -50, 0)
# Check video card capabilities.
if (base.win.getGsg().getSupportsBasicShaders() == 0):
addTitle("Toon Shader: Video driver reports that shaders are not supported.")
return
# Enable a 'light ramp' - this discretizes the lighting,
# which is half of what makes a model look like a cartoon.
# Light ramps only work if shader generation is enabled,
# so we call 'setShaderAuto'.
tempnode = NodePath(PandaNode("temp node"))
tempnode.setAttrib(LightRampAttrib.makeSingleThreshold(0.5, 0.4))
tempnode.setShaderAuto()
base.cam.node().setInitialState(tempnode.getState())
# Use class 'CommonFilters' to enable a cartoon inking filter.
# This can fail if the video card is not powerful enough, if so,
# display an error and exit.
self.separation = 1 # Pixels
self.filters = CommonFilters(base.win, base.cam)
filterok = self.filters.setCartoonInk(separation=self.separation)
if (filterok == False):
addTitle("Toon Shader: Video card not powerful enough to do image postprocessing")
return
# Post the instructions.
self.title = addTitle("Panda3D: Tutorial - Toon Shading with Normals-Based Inking")
self.inst1 = addInstructions(0.95,"ESC: Quit")
self.inst2 = addInstructions(0.90,"Up/Down: Increase/Decrease Line Thickness")
self.inst3 = addInstructions(0.85,"V: View the render-to-texture results")
# Load a dragon model and animate it.
self.character = Actor()
self.character.loadModel('models/samples/cartoon/nik_dragon')
self.character.reparentTo(render)
self.character.loadAnims({'win': 'models/samples/cartoon/nik_dragon'})
self.character.loop('win')
self.character.hprInterval(15, Point3(360, 0,0)).loop()
# Create a non-attenuating point light and an ambient light.
plightnode = PointLight("point light")
plightnode.setAttenuation(Vec3(1,0,0))
plight = render.attachNewNode(plightnode)
plight.setPos(30,-50,0)
alightnode = AmbientLight("ambient light")
alightnode.setColor(Vec4(0.8,0.8,0.8,1))
alight = render.attachNewNode(alightnode)
render.setLight(alight)
render.setLight(plight)
# Panda contains a built-in viewer that lets you view the
# results of all render-to-texture operations. This lets you
# see what class CommonFilters is doing behind the scenes.
self.accept("v", base.bufferViewer.toggleEnable)
self.accept("V", base.bufferViewer.toggleEnable)
base.bufferViewer.setPosition("llcorner")
self.accept("s", self.filters.manager.resizeBuffers)
# These allow you to change cartooning parameters in realtime
self.accept("escape", sys.exit, [0])
self.accept("arrow_up", self.increaseSeparation)
self.accept("arrow_down", self.decreaseSeparation)
def __init__(self):
base.disableMouse()
base.setBackgroundColor(0,0,0)
camera.setPos(0,-50,0)
# Check video card capabilities.
if (base.win.getGsg().getSupportsBasicShaders() == 0):
addTitle("Glow Filter: Video driver reports that shaders are not supported.")
return
# Use class 'CommonFilters' to enable a bloom filter.
# The brightness of a pixel is measured using a weighted average
# of R,G,B,A. We put all the weight on Alpha, meaning that for
# us, the framebuffer's alpha channel alpha controls bloom.
self.filters = CommonFilters(base.win, base.cam)
filterok = self.filters.setBloom(blend=(0,0,0,1), desat=-0.5, intensity=3.0, size="small")
if (filterok == False):
addTitle("Toon Shader: Video card not powerful enough to do image postprocessing")
return
self.glowSize=1
# Post the instructions
self.title = addTitle("Panda3D: Tutorial - Glow Filter")
self.inst1 = addInstructions(0.95,"ESC: Quit")
self.inst2 = addInstructions(0.90,"Space: Toggle Glow Filter Small/Med/Large/Off")
self.inst3 = addInstructions(0.85,"Enter: Toggle Running/Spinning")
self.inst4 = addInstructions(0.80,"V: View the render-to-texture results")
# load our model
self.tron=Actor()
self.tron.loadModel("samples/glow/tron")
self.tron.loadAnims({"running":"samples/glow/models/tron_anim"})
self.tron.reparentTo(render)
self.interval = self.tron.hprInterval(60,Point3(360,0,0))
self.interval.loop()
self.isRunning=False
# put some lighting on the model
dlight = DirectionalLight('dlight')
alight = AmbientLight('alight')
dlnp = render.attachNewNode(dlight)
alnp = render.attachNewNode(alight)
dlight.setColor(Vec4(1.0, 0.7, 0.2, 1))
alight.setColor(Vec4(0.2, 0.2, 0.2, 1))
dlnp.setHpr(0, -60, 0)
render.setLight(dlnp)
render.setLight(alnp)
# Panda contains a built-in viewer that lets you view the results of
# your render-to-texture operations. This code configures the viewer.
self.accept("v", base.bufferViewer.toggleEnable)
self.accept("V", base.bufferViewer.toggleEnable)
base.bufferViewer.setPosition("llcorner")
base.bufferViewer.setLayout("hline")
#base.camLens.setFov(100)
# event handling
self.accept("space", self.toggleGlow)
self.accept("enter", self.toggleDisplay)
self.accept("escape", sys.exit, [0])
def __init__(self):
base.disableMouse()
base.setBackgroundColor(0, 0, 0)
camera.setPos(0, -50, 0)
# Check video card capabilities.
if (base.win.getGsg().getSupportsBasicShaders() == 0):
addTitle(
"Glow Filter: Video driver reports that shaders are not supported."
)
return
# Use class 'CommonFilters' to enable a bloom filter.
# The brightness of a pixel is measured using a weighted average
# of R,G,B,A. We put all the weight on Alpha, meaning that for
# us, the framebuffer's alpha channel alpha controls bloom.
self.filters = CommonFilters(base.win, base.cam)
filterok = self.filters.setBloom(blend=(0, 0, 0, 1),
desat=-0.5,
intensity=3.0,
size="small")
if (filterok == False):
addTitle(
"Toon Shader: Video card not powerful enough to do image postprocessing"
)
return
self.glowSize = 1
# Post the instructions
self.title = addTitle("Panda3D: Tutorial - Glow Filter")
self.inst1 = addInstructions(0.95, "ESC: Quit")
self.inst2 = addInstructions(
0.90, "Space: Toggle Glow Filter Small/Med/Large/Off")
self.inst3 = addInstructions(0.85, "Enter: Toggle Running/Spinning")
self.inst4 = addInstructions(0.80,
"V: View the render-to-texture results")
# load our model
self.tron = Actor()
self.tron.loadModel("samples/glow/tron")
self.tron.loadAnims({"running": "samples/glow/models/tron_anim"})
self.tron.reparentTo(render)
self.interval = self.tron.hprInterval(60, Point3(360, 0, 0))
self.interval.loop()
self.isRunning = False
# put some lighting on the model
dlight = DirectionalLight('dlight')
alight = AmbientLight('alight')
dlnp = render.attachNewNode(dlight)
alnp = render.attachNewNode(alight)
dlight.setColor(Vec4(1.0, 0.7, 0.2, 1))
alight.setColor(Vec4(0.2, 0.2, 0.2, 1))
dlnp.setHpr(0, -60, 0)
render.setLight(dlnp)
render.setLight(alnp)
# Panda contains a built-in viewer that lets you view the results of
# your render-to-texture operations. This code configures the viewer.
self.accept("v", base.bufferViewer.toggleEnable)
self.accept("V", base.bufferViewer.toggleEnable)
base.bufferViewer.setPosition("llcorner")
base.bufferViewer.setLayout("hline")
#base.camLens.setFov(100)
# event handling
self.accept("space", self.toggleGlow)
self.accept("enter", self.toggleDisplay)
self.accept("escape", sys.exit, [0])
self.bcard.setScale(0.999)
self.bcard.setPos(0,0,0)
self.bcard.setR(1)
self.clickrate = 10000
self.nextclick = 0
t=MotionTrails()
character=Actor()
character.loadModel('models/samples/motion_trails/dancer')
character.reparentTo(render)
character.loadAnims({'win':'models/samples/motion_trails/dancer'})
character.loop('win')
# character.hprInterval(15, Point3(360, 0,0)).loop()
#put some lighting on the model
dlight = DirectionalLight('dlight')
alight = AmbientLight('alight')
dlnp = render.attachNewNode(dlight)
alnp = render.attachNewNode(alight)
dlight.setColor(Vec4(1.0, 0.9, 0.8, 1))
alight.setColor(Vec4(0.2, 0.3, 0.4, 1))
dlnp.setHpr(0, -60, 0)
render.setLight(dlnp)
render.setLight(alnp)
run()
def __init__(self):
base.disableMouse()
base.setBackgroundColor(0,0,0)
camera.setPos(0,-50,0)
# Check video card capabilities.
if (base.win.getGsg().getSupportsBasicShaders() == 0):
addTitle("Glow Filter: Video driver reports that shaders are not supported.")
return
# Post the instructions
self.title = addTitle("Panda3D: Tutorial - Glow Filter")
self.inst1 = addInstructions(0.95,"ESC: Quit")
self.inst2 = addInstructions(0.90,"Space: Toggle Glow Filter On/Off")
self.inst3 = addInstructions(0.85,"Enter: Toggle Running/Spinning")
self.inst4 = addInstructions(0.80,"V: View the render-to-texture results")
#create the shader that will determime what parts of the scene will glow
glowShader=Shader.load(os.path.join(PANDA_SHADER_PATH, \
"samples/glow/glow_shader.sha"))
# load our model
self.tron=Actor()
self.tron.loadModel("models/samples/glow/tron")
self.tron.loadAnims({"running":"models/samples/glow/tron_anim"})
self.tron.reparentTo(render)
self.interval = self.tron.hprInterval(60,Point3(360,0,0))
self.interval.loop()
self.isRunning=False
#put some lighting on the tron model
dlight = DirectionalLight('dlight')
alight = AmbientLight('alight')
dlnp = render.attachNewNode(dlight)
alnp = render.attachNewNode(alight)
dlight.setColor(Vec4(1.0, 0.7, 0.2, 1))
alight.setColor(Vec4(0.2, 0.2, 0.2, 1))
dlnp.setHpr(0, -60, 0)
render.setLight(dlnp)
render.setLight(alnp)
# create the glow buffer. This buffer renders like a normal scene,
# except that only the glowing materials should show up nonblack.
glowBuffer=base.win.makeTextureBuffer("Glow scene", 512, 512)
glowBuffer.setSort(-3)
glowBuffer.setClearColor(Vec4(0,0,0,1))
# We have to attach a camera to the glow buffer. The glow camera
# must have the same frustum as the main camera. As long as the aspect
# ratios match, the rest will take care of itself.
glowCamera=base.makeCamera(glowBuffer, lens=base.cam.node().getLens())
# Tell the glow camera to use the glow shader
tempnode = NodePath(PandaNode("temp node"))
tempnode.setShader(glowShader)
glowCamera.node().setInitialState(tempnode.getState())
# set up the pipeline: from glow scene to blur x to blur y to main window.
blurXBuffer=makeFilterBuffer(glowBuffer, "Blur X", -2, \
os.path.join(PANDA_SHADER_PATH, "samples/glow/glow_xblur.sha"))
blurYBuffer=makeFilterBuffer(blurXBuffer, "Blur Y", -1, \
os.path.join(PANDA_SHADER_PATH, "samples/glow/glow_yblur.sha"))
self.finalcard = blurYBuffer.getTextureCard()
self.finalcard.reparentTo(render2d)
self.finalcard.setAttrib(ColorBlendAttrib.make(ColorBlendAttrib.MAdd))
# Panda contains a built-in viewer that lets you view the results of
# your render-to-texture operations. This code configures the viewer.
self.accept("v", base.bufferViewer.toggleEnable)
self.accept("V", base.bufferViewer.toggleEnable)
base.bufferViewer.setPosition("llcorner")
base.bufferViewer.setLayout("hline")
base.bufferViewer.setCardSize(0.652,0)
# event handling
self.accept("space", self.toggleGlow)
self.accept("enter", self.toggleDisplay)
self.accept("escape", sys.exit, [0])
self.glowOn=True;
def __init__(self):
# Check video card capabilities.
if (base.win.getGsg().getSupportsBasicShaders() == 0):
addTitle("Normal Mapping: Video driver reports that shaders are not supported.")
return
# Post the instructions
self.title = addTitle("Panda3D: Tutorial - Normal Mapping (aka Bump Mapping)")
self.inst1 = addInstructions(0.95, "Press ESC to exit")
self.inst2 = addInstructions(0.90, "Move mouse to rotate camera")
self.inst3 = addInstructions(0.85, "Left mouse button: Move forwards")
self.inst4 = addInstructions(0.80, "Right mouse button: Move backwards")
self.inst5 = addInstructions(0.75, "Enter: Turn normal maps Off")
# Load the 'abstract room' model. This is a model of an
# empty room containing a pillar, a pyramid, and a bunch
# of exaggeratedly bumpy textures.
self.room = loader.loadModel( \
"models/samples/normal_mapping/abstractroom")
self.room.reparentTo(render)
# Make the mouse invisible, turn off normal mouse controls
base.disableMouse()
props = WindowProperties()
props.setCursorHidden(True)
base.win.requestProperties(props)
# Set the current viewing target
self.focus = Vec3(55,-55,20)
self.heading = 180
self.pitch = 0
self.mousex = 0
self.mousey = 0
self.last = 0
self.mousebtn = [0,0,0]
# Start the camera control task:
taskMgr.add(self.controlCamera, "camera-task")
self.accept("escape", sys.exit, [0])
self.accept("mouse1", self.setMouseBtn, [0, 1])
self.accept("mouse1-up", self.setMouseBtn, [0, 0])
self.accept("mouse2", self.setMouseBtn, [1, 1])
self.accept("mouse2-up", self.setMouseBtn, [1, 0])
self.accept("mouse3", self.setMouseBtn, [2, 1])
self.accept("mouse3-up", self.setMouseBtn, [2, 0])
self.accept("enter", self.toggleShader)
self.accept("j", self.rotateLight, [-1])
self.accept("k", self.rotateLight, [1])
self.accept("arrow_left", self.rotateCam, [-1])
self.accept("arrow_right", self.rotateCam, [1])
# Add a light to the scene.
self.lightpivot = render.attachNewNode("lightpivot")
self.lightpivot.setPos(0,0,25)
self.lightpivot.hprInterval(10,Point3(360,0,0)).loop()
plight = PointLight('plight')
plight.setColor(Vec4(1, 1, 1, 1))
plight.setAttenuation(Vec3(0.7,0.05,0))
plnp = self.lightpivot.attachNewNode(plight)
plnp.setPos(45, 0, 0)
self.room.setLight(plnp)
self.room.setShaderInput("light", plnp)
# Add an ambient light
alight = AmbientLight('alight')
alight.setColor(Vec4(0.2, 0.2, 0.2, 1))
alnp = render.attachNewNode(alight)
self.room.setLight(alnp)
# create a sphere to denote the light
sphere = loader.loadModel("models/samples/normal_mapping/sphere")
sphere.reparentTo(plnp)
# load and apply the shader. This is using panda's
# built-in shader generation capabilities to create the
# shader for you. However, if desired, you can supply
# the shader manually. Change this line of code to:
# self.room.setShader(Shader.load("bumpMapper.sha"))
self.room.setShaderAuto()
self.shaderenable = 1
def __init__(self):
#This code puts the standard title and instruction text on screen
self.title = OnscreenText(text="Panda3D: Tutorial - Collision Detection",
style=1, fg=(1,1,1,1),
pos=(0.7,-0.95), scale = .07, font = font)
self.instructions = OnscreenText(text="Mouse pointer tilts the board",
pos = (-1.3, .95), fg=(1,1,1,1), font = font,
align = TextNode.ALeft, scale = .05)
self.accept("escape", sys.exit) #Escape quits
base.disableMouse() #Disable mouse-based camera control
camera.setPosHpr(0, 0, 25, 0, -90, 0) #Place the camera
#Load the maze and place it in the scene
self.maze = loader.loadModel("models/samples/ball_in_maze/maze")
self.maze.reparentTo(render)
#Most times, you want collisions to be tested against invisible geometry
#rather than every polygon. This is because testing against every polygon
#in the scene is usually too slow. You can have simplified or approximate
#geometry for the solids and still get good results.
#
#Sometimes you'll want to create and position your own collision solids in
#code, but it's often easier to have them built automatically. This can be
#done by adding special tags into an egg file. Check maze.egg and ball.egg
#and look for lines starting with <Collide>. The part is brackets tells
#Panda exactly what to do. Polyset means to use the polygons in that group
#as solids, while Sphere tells panda to make a collision sphere around them
#Keep means to keep the polygons in the group as visable geometry (good
#for the ball, not for the triggers), and descend means to make sure that
#the settings are applied to any subgroups.
#
#Once we have the collision tags in the models, we can get to them using
#NodePath's find command
#Find the collision node named wall_collide
self.walls = self.maze.find("**/wall_collide")
#Collision objects are sorted using BitMasks. BitMasks are ordinary numbers
#with extra methods for working with them as binary bits. Every collision
#solid has both a from mask and an into mask. Before Panda tests two
#objects, it checks to make sure that the from and into collision masks
#have at least one bit in common. That way things that shouldn't interact
#won't. Normal model nodes have collision masks as well. By default they
#are set to bit 20. If you want to collide against actual visable polygons,
#set a from collide mask to include bit 20
#
#For this example, we will make everything we want the ball to collide with
#include bit 0
self.walls.node().setIntoCollideMask(BitMask32.bit(0))
#CollisionNodes are usually invisible but can be shown. Uncomment the next
#line to see the collision walls
#self.walls.show()
#We will now find the triggers for the holes and set their masks to 0 as
#well. We also set their names to make them easier to identify during
#collisions
self.loseTriggers = []
for i in range(6):
trigger = self.maze.find("**/hole_collide" + str(i))
trigger.node().setIntoCollideMask(BitMask32.bit(0))
trigger.node().setName("loseTrigger")
self.loseTriggers.append(trigger)
#Uncomment this line to see the triggers
#trigger.show()
#Ground_collide is a single polygon on the same plane as the ground in the
#maze. We will use a ray to collide with it so that we will know exactly
#what height to put the ball at every frame. Since this is not something
#that we want the ball itself to collide with, it has a different
#bitmask.
self.mazeGround = self.maze.find("**/ground_collide")
self.mazeGround.node().setIntoCollideMask(BitMask32.bit(1))
#Load the ball and attach it to the scene
#It is on a root dummy node so that we can rotate the ball itself without
#rotating the ray that will be attached to it
self.ballRoot = render.attachNewNode("ballRoot")
self.ball = loader.loadModel("models/samples/ball_in_maze/ball")
self.ball.reparentTo(self.ballRoot)
#Find the collison sphere for the ball which was created in the egg file
#Notice that it has a from collision mask of bit 0, and an into collison
#mask of no bits. This means that the ball can only cause collisions, not
#be collided into
self.ballSphere = self.ball.find("**/ball")
self.ballSphere.node().setFromCollideMask(BitMask32.bit(0))
self.ballSphere.node().setIntoCollideMask(BitMask32.allOff())
#No we create a ray to start above the ball and cast down. This is to
#Determine the height the ball should be at and the angle the floor is
#tilting. We could have used the sphere around the ball itself, but it
#would not be as reliable
self.ballGroundRay = CollisionRay() #Create the ray
self.ballGroundRay.setOrigin(0,0,10) #Set its origin
self.ballGroundRay.setDirection(0,0,-1) #And its direction
#Collision solids go in CollisionNode
self.ballGroundCol = CollisionNode('groundRay') #Create and name the node
self.ballGroundCol.addSolid(self.ballGroundRay) #Add the ray
self.ballGroundCol.setFromCollideMask(BitMask32.bit(1)) #Set its bitmasks
self.ballGroundCol.setIntoCollideMask(BitMask32.allOff())
#Attach the node to the ballRoot so that the ray is relative to the ball
#(it will always be 10 feet over the ball and point down)
self.ballGroundColNp = self.ballRoot.attachNewNode(self.ballGroundCol)
#Uncomment this line to see the ray
#self.ballGroundColNp.show()
#Finally, we create a CollisionTraverser. CollisionTraversers are what
#do the job of calculating collisions
self.cTrav = CollisionTraverser()
#Collision traverservs tell collision handlers about collisions, and then
#the handler decides what to do with the information. We are using a
#CollisionHandlerQueue, which simply creates a list of all of the
#collisions in a given pass. There are more sophisticated handlers like
#one that sends events and another that tries to keep collided objects
#apart, but the results are often better with a simple queue
self.cHandler = CollisionHandlerQueue()
#Now we add the collision nodes that can create a collision to the
#traverser. The traverser will compare these to all others nodes in the
#scene. There is a limit of 32 CollisionNodes per traverser
#We add the collider, and the handler to use as a pair
self.cTrav.addCollider(self.ballSphere, self.cHandler)
self.cTrav.addCollider(self.ballGroundColNp, self.cHandler)
#Collision traversers have a built in tool to help visualize collisions.
#Uncomment the next line to see it.
#self.cTrav.showCollisions(render)
#This section deals with lighting for the ball. Only the ball was lit
#because the maze has static lighting pregenerated by the modeler
lAttrib = LightAttrib.makeAllOff()
ambientLight = AmbientLight( "ambientLight" )
ambientLight.setColor( Vec4(.55, .55, .55, 1) )
lAttrib = lAttrib.addLight( ambientLight )
directionalLight = DirectionalLight( "directionalLight" )
directionalLight.setDirection( Vec3( 0, 0, -1 ) )
directionalLight.setColor( Vec4( 0.375, 0.375, 0.375, 1 ) )
directionalLight.setSpecularColor(Vec4(1,1,1,1))
lAttrib = lAttrib.addLight( directionalLight )
self.ballRoot.node().setAttrib( lAttrib )
#This section deals with adding a specular highlight to the ball to make
#it look shiny
m = Material()
m.setSpecular(Vec4(1,1,1,1))
m.setShininess(96)
self.ball.setMaterial(m, 1)
#Finally, we call start for more initialization
self.start()
def __init__(self):
#This code puts the standard title and instruction text on screen
self.title = OnscreenText(
text="Panda3D: Tutorial - Collision Detection",
style=1,
fg=(1, 1, 1, 1),
pos=(0.7, -0.95),
scale=.07,
font=font)
self.instructions = OnscreenText(text="Mouse pointer tilts the board",
pos=(-1.3, .95),
fg=(1, 1, 1, 1),
font=font,
align=TextNode.ALeft,
scale=.05)
self.accept("escape", sys.exit) #Escape quits
base.disableMouse() #Disable mouse-based camera control
camera.setPosHpr(0, 0, 25, 0, -90, 0) #Place the camera
#Load the maze and place it in the scene
self.maze = loader.loadModel("models/samples/ball_in_maze/maze")
self.maze.reparentTo(render)
#Most times, you want collisions to be tested against invisible geometry
#rather than every polygon. This is because testing against every polygon
#in the scene is usually too slow. You can have simplified or approximate
#geometry for the solids and still get good results.
#
#Sometimes you'll want to create and position your own collision solids in
#code, but it's often easier to have them built automatically. This can be
#done by adding special tags into an egg file. Check maze.egg and ball.egg
#and look for lines starting with <Collide>. The part is brackets tells
#Panda exactly what to do. Polyset means to use the polygons in that group
#as solids, while Sphere tells panda to make a collision sphere around them
#Keep means to keep the polygons in the group as visable geometry (good
#for the ball, not for the triggers), and descend means to make sure that
#the settings are applied to any subgroups.
#
#Once we have the collision tags in the models, we can get to them using
#NodePath's find command
#Find the collision node named wall_collide
self.walls = self.maze.find("**/wall_collide")
#Collision objects are sorted using BitMasks. BitMasks are ordinary numbers
#with extra methods for working with them as binary bits. Every collision
#solid has both a from mask and an into mask. Before Panda tests two
#objects, it checks to make sure that the from and into collision masks
#have at least one bit in common. That way things that shouldn't interact
#won't. Normal model nodes have collision masks as well. By default they
#are set to bit 20. If you want to collide against actual visable polygons,
#set a from collide mask to include bit 20
#
#For this example, we will make everything we want the ball to collide with
#include bit 0
self.walls.node().setIntoCollideMask(BitMask32.bit(0))
#CollisionNodes are usually invisible but can be shown. Uncomment the next
#line to see the collision walls
#self.walls.show()
#We will now find the triggers for the holes and set their masks to 0 as
#well. We also set their names to make them easier to identify during
#collisions
self.loseTriggers = []
for i in range(6):
trigger = self.maze.find("**/hole_collide" + str(i))
trigger.node().setIntoCollideMask(BitMask32.bit(0))
trigger.node().setName("loseTrigger")
self.loseTriggers.append(trigger)
#Uncomment this line to see the triggers
#trigger.show()
#Ground_collide is a single polygon on the same plane as the ground in the
#maze. We will use a ray to collide with it so that we will know exactly
#what height to put the ball at every frame. Since this is not something
#that we want the ball itself to collide with, it has a different
#bitmask.
self.mazeGround = self.maze.find("**/ground_collide")
self.mazeGround.node().setIntoCollideMask(BitMask32.bit(1))
#Load the ball and attach it to the scene
#It is on a root dummy node so that we can rotate the ball itself without
#rotating the ray that will be attached to it
self.ballRoot = render.attachNewNode("ballRoot")
self.ball = loader.loadModel("models/samples/ball_in_maze/ball")
self.ball.reparentTo(self.ballRoot)
#Find the collison sphere for the ball which was created in the egg file
#Notice that it has a from collision mask of bit 0, and an into collison
#mask of no bits. This means that the ball can only cause collisions, not
#be collided into
self.ballSphere = self.ball.find("**/ball")
self.ballSphere.node().setFromCollideMask(BitMask32.bit(0))
self.ballSphere.node().setIntoCollideMask(BitMask32.allOff())
#No we create a ray to start above the ball and cast down. This is to
#Determine the height the ball should be at and the angle the floor is
#tilting. We could have used the sphere around the ball itself, but it
#would not be as reliable
self.ballGroundRay = CollisionRay() #Create the ray
self.ballGroundRay.setOrigin(0, 0, 10) #Set its origin
self.ballGroundRay.setDirection(0, 0, -1) #And its direction
#Collision solids go in CollisionNode
self.ballGroundCol = CollisionNode(
'groundRay') #Create and name the node
self.ballGroundCol.addSolid(self.ballGroundRay) #Add the ray
self.ballGroundCol.setFromCollideMask(
BitMask32.bit(1)) #Set its bitmasks
self.ballGroundCol.setIntoCollideMask(BitMask32.allOff())
#Attach the node to the ballRoot so that the ray is relative to the ball
#(it will always be 10 feet over the ball and point down)
self.ballGroundColNp = self.ballRoot.attachNewNode(self.ballGroundCol)
#Uncomment this line to see the ray
#self.ballGroundColNp.show()
#Finally, we create a CollisionTraverser. CollisionTraversers are what
#do the job of calculating collisions
self.cTrav = CollisionTraverser()
#Collision traverservs tell collision handlers about collisions, and then
#the handler decides what to do with the information. We are using a
#CollisionHandlerQueue, which simply creates a list of all of the
#collisions in a given pass. There are more sophisticated handlers like
#one that sends events and another that tries to keep collided objects
#apart, but the results are often better with a simple queue
self.cHandler = CollisionHandlerQueue()
#Now we add the collision nodes that can create a collision to the
#traverser. The traverser will compare these to all others nodes in the
#scene. There is a limit of 32 CollisionNodes per traverser
#We add the collider, and the handler to use as a pair
self.cTrav.addCollider(self.ballSphere, self.cHandler)
self.cTrav.addCollider(self.ballGroundColNp, self.cHandler)
#Collision traversers have a built in tool to help visualize collisions.
#Uncomment the next line to see it.
#self.cTrav.showCollisions(render)
#This section deals with lighting for the ball. Only the ball was lit
#because the maze has static lighting pregenerated by the modeler
lAttrib = LightAttrib.makeAllOff()
ambientLight = AmbientLight("ambientLight")
ambientLight.setColor(Vec4(.55, .55, .55, 1))
lAttrib = lAttrib.addLight(ambientLight)
directionalLight = DirectionalLight("directionalLight")
directionalLight.setDirection(Vec3(0, 0, -1))
directionalLight.setColor(Vec4(0.375, 0.375, 0.375, 1))
directionalLight.setSpecularColor(Vec4(1, 1, 1, 1))
lAttrib = lAttrib.addLight(directionalLight)
self.ballRoot.node().setAttrib(lAttrib)
#This section deals with adding a specular highlight to the ball to make
#it look shiny
m = Material()
m.setSpecular(Vec4(1, 1, 1, 1))
m.setShininess(96)
self.ball.setMaterial(m, 1)
#Finally, we call start for more initialization
self.start()
def __init__( self ):
#The main initialization of our class
#This creates the on screen title that is in every tutorial
self.title = OnscreenText(text="Panda3D: Tutorial - Lighting",
style=1, fg=(1,1,0,1), font = font,
pos=(0.87,-0.95), scale = .07)
#Creates labels used for onscreen instructions
self.ambientText = self.makeStatusLabel(0)
self.directionalText = self.makeStatusLabel(1)
self.spotlightText = self.makeStatusLabel(2)
self.pointLightText = self.makeStatusLabel(3)
self.spinningText = self.makeStatusLabel(4)
self.ambientBrightnessText = self.makeStatusLabel(5)
self.directionalBrightnessText = self.makeStatusLabel(6)
self.spotlightBrightnessText = self.makeStatusLabel(7)
self.spotlightExponentText = self.makeStatusLabel(8)
self.lightingPerPixelText = self.makeStatusLabel(9)
self.disco = loader.loadModel("models/samples/disco_lights/disco_hall")
self.disco.reparentTo(render)
self.disco.setPosHpr(0, 50, -4, 90, 0, 0)
# First we create an ambient light. All objects are affected by ambient
# light equally
#Create and name the ambient light
self.ambientLight = render.attachNewNode( AmbientLight( "ambientLight" ) )
#Set the color of the ambient light
self.ambientLight.node().setColor( Vec4( .1, .1, .1, 1 ) )
#add the newly created light to the lightAttrib
# Now we create a directional light. Directional lights add shading from a
# given angle. This is good for far away sources like the sun
self.directionalLight = render.attachNewNode( DirectionalLight(
"directionalLight" ) )
self.directionalLight.node().setColor( Vec4( .35, .35, .35, 1 ) )
# The direction of a directional light is set as a 3D vector
self.directionalLight.node().setDirection( Vec3( 1, 1, -2 ) )
# Now we create a spotlight. Spotlights light objects in a given cone
# They are good for simulating things like flashlights
self.spotlight = camera.attachNewNode( Spotlight( "spotlight" ) )
self.spotlight.node().setColor( Vec4( .45, .45, .45, 1 ) )
#The cone of a spotlight is controlled by it's lens. This creates the lens
self.spotlight.node().setLens( PerspectiveLens() )
#This sets the Field of View (fov) of the lens, in degrees for width and
#height. The lower the numbers, the tighter the spotlight.
self.spotlight.node().getLens().setFov( 16, 16 )
# Attenuation controls how the light fades with distance. The numbers are
# The three values represent the three constants (constant, linear, and
# quadratic) in the internal lighting equation. The higher the numbers the
# shorter the light goes.
self.spotlight.node().setAttenuation( Vec3( 1, 0.0, 0.0 ) )
# This exponent value sets how soft the edge of the spotlight is. 0 means a
# hard edge. 128 means a very soft edge.
self.spotlight.node().setExponent( 60.0 )
# Now we create three colored Point lights. Point lights are lights that
# radiate from a single point, like a light bulb. Like spotlights, they
# are given position by attaching them to NodePaths in the world
self.redHelper = loader.loadModel('models/samples/disco_lights/sphere')
self.redHelper.setColor( Vec4( 1, 0, 0, 1 ) )
self.redHelper.setPos( -6.5, -3.75, 0 )
self.redHelper.setScale(.25)
self.redPointLight = self.redHelper.attachNewNode( PointLight(
"redPointLight" ) )
self.redPointLight.node().setColor( Vec4( .35, 0, 0, 1 ) )
self.redPointLight.node().setAttenuation( Vec3( .1, 0.04, 0.0 ) )
#The green point light and helper
self.greenHelper = loader.loadModel('models/samples/disco_lights/sphere')
self.greenHelper.setColor( Vec4( 0, 1, 0, 1 ) )
self.greenHelper.setPos( 0, 7.5, 0 )
self.greenHelper.setScale(.25)
self.greenPointLight = self.greenHelper.attachNewNode( PointLight(
"greenPointLight" ) )
self.greenPointLight.node().setAttenuation( Vec3( .1, .04, .0 ) )
self.greenPointLight.node().setColor( Vec4( 0, .35, 0, 1 ) )
#The blue point light and helper
self.blueHelper = loader.loadModel('models/samples/disco_lights/sphere')
self.blueHelper.setColor( Vec4( 0, 0, 1, 1 ) )
self.blueHelper.setPos( 6.5, -3.75, 0 )
self.blueHelper.setScale(.25)
self.bluePointLight = self.blueHelper.attachNewNode( PointLight( "bluePointLight" ) )
self.bluePointLight.node().setAttenuation( Vec3( .1, 0.04, 0.0 ) )
self.bluePointLight.node().setColor( Vec4( 0, 0, .35, 1 ) )
self.bluePointLight.node().setSpecularColor( Vec4( 1 ) )
#Create a dummy node so the lights can be spun with one command
self.pointLightHelper = render.attachNewNode( "pointLightHelper" )
self.pointLightHelper.setPos(0, 50, 11)
self.redHelper.reparentTo( self.pointLightHelper )
self.greenHelper.reparentTo( self.pointLightHelper )
self.blueHelper.reparentTo( self.pointLightHelper )
#Finally we store the lights on the root of the scene graph.
#This will cause them to affect everything in the scene.
render.setLight( self.ambientLight )
render.setLight( self.directionalLight )
render.setLight( self.spotlight )
render.setLight( self.redPointLight )
render.setLight( self.greenPointLight )
render.setLight( self.bluePointLight )
# Create and start interval to spin the lights, and a variable to
# manage them.
self.pointLightsSpin = self.pointLightHelper.hprInterval(6, Vec3(360, 0, 0))
self.pointLightsSpin.loop()
self.arePointLightsSpinning = True
# Per-pixel lighting is initially off
self.perPixelEnabled = False
# listen to keys for controlling the lights
self.accept( "escape", sys.exit)
self.accept( "a", self.toggleLights, [[self.ambientLight]] )
self.accept( "d", self.toggleLights, [[self.directionalLight]] )
self.accept( "s", self.toggleLights, [[self.spotlight]] )
self.accept( "p", self.toggleLights, [[self.redPointLight,
self.greenPointLight,
self.bluePointLight]] )
self.accept( "r", self.toggleSpinningPointLights )
self.accept( "l", self.togglePerPixelLighting )
self.accept( "z", self.addBrightness, [self.ambientLight, -.05] )
self.accept( "x", self.addBrightness, [self.ambientLight, .05] )
self.accept( "c", self.addBrightness, [self.directionalLight, -.05] )
self.accept( "v", self.addBrightness, [self.directionalLight, .05] )
self.accept( "b", self.addBrightness, [self.spotlight, -.05] )
self.accept( "n", self.addBrightness, [self.spotlight, .05] )
self.accept( "q", self.adjustSpotlightExponent, [self.spotlight, -1] )
self.accept( "w", self.adjustSpotlightExponent, [self.spotlight, 1] )
#Finally call the function that builds the instruction texts
self.updateStatusLabel()
self.fcard.hide()
self.bcard.setColor(1, 1, 1, 1)
self.bcard.setScale(0.999)
self.bcard.setPos(0, 0, 0)
self.bcard.setR(1)
self.clickrate = 10000
self.nextclick = 0
t = MotionTrails()
character = Actor()
character.loadModel('models/samples/motion_trails/dancer')
character.reparentTo(render)
character.loadAnims({'win': 'models/samples/motion_trails/dancer'})
character.loop('win')
# character.hprInterval(15, Point3(360, 0,0)).loop()
#put some lighting on the model
dlight = DirectionalLight('dlight')
alight = AmbientLight('alight')
dlnp = render.attachNewNode(dlight)
alnp = render.attachNewNode(alight)
dlight.setColor(Vec4(1.0, 0.9, 0.8, 1))
alight.setColor(Vec4(0.2, 0.3, 0.4, 1))
dlnp.setHpr(0, -60, 0)
render.setLight(dlnp)
render.setLight(alnp)
run()