def __init__(self, parent, entity, foot=1):
self.entity = entity
self._moveRadCircleNP = NodePath("Movement Radius Node")
self._moveLine = LineSegs()
self._moveLineNP = NodePath("Movement Direction Line Node")
self._moveZLine = LineSegs()
self._moveZLineNP = NodePath("Movement Z Line Node")
self._moveZFootNP = NodePath("Movement Z Foot Node")
self._moveFootCircle = LineSegs()
self._moveFootCircleNP = NodePath("Movement Foot Circle Node")
self._attackRadCircle = LineSegs()
self._attackRadCircleNP = NodePath("Attack Radius Node")
self._np = NodePath("Movement Node")
self.attackables = []
Event.Dispatcher().register(self, 'E_Key_ZUp', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZDown', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZUp-up', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZDown-up', self.onZChange)
self.aaLevel = int(GameSettings().getSetting('ANTIALIAS'))
self.parent = parent
self.start = Vec3(0, 0, 0)
self.moveRad = entity.moveRad
self.footRad = foot
self.attackRad = entity.attackRad
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
self.draw()
self._np.reparentTo(self.parent)
if self.aaLevel > 0:
self._np.setAntialias(AntialiasAttrib.MLine, self.aaLevel)
taskMgr.add(self.updateMovePos, 'Movement Indicator Update Task')
def makePerspective(parent):
v = Viewport('persp', parent)
v.camPos = Point3(-19, -19, 19)
v.camLookAt = Point3(0, 0, 0)
v.grid = DirectGrid(parent=render)
collPlane = CollisionNode('PerspGridCol')
collPlane.addSolid(CollisionPlane(Plane(0, 0, 1, 0)))
#oldBitmask = collPlane.getIntoCollideMask()
#collPlane.setIntoCollideMask(BitMask32.bit(21)|oldBitmask)
collPlane.setIntoCollideMask(BitMask32.bit(21))
v.collPlane = NodePath(collPlane)
v.collPlane.reparentTo(v.grid)
collPlane2 = CollisionNode('PerspGridCol2')
collPlane2.addSolid(CollisionPlane(Plane(0, 0, -1, 0)))
#oldBitmask = collPlane2.getIntoCollideMask()
#collPlane2.setIntoCollideMask(BitMask32.bit(21)|oldBitmask)
collPlane2.setIntoCollideMask(BitMask32.bit(21))
v.collPlane2 = NodePath(collPlane2)
v.collPlane2.reparentTo(v.grid)
#v.grid.gridBack.findAllMatches("**/+GeomNode")[0].setName("_perspViewGridBack")
LE_showInOneCam(v.grid, 'persp')
return v
def __init__(self,manager,xml):
self.surface = getWaterSurface(manager)
self.surface.reparentTo(render)
self.surface.hide(BitMask32.bit(1)) # Invisible to reflection camera (speedup)
self.surface.hide(BitMask32.bit(2)) # Invisible to volumetric lighting camera (speedup)
self.surface.hide(BitMask32.bit(3)) # Invisible to shadow cameras (speedup)
self.surface.setShader(loader.loadShader(manager.get('paths').getConfig().find('shaders').get('path')+'/water.cg'))
self.surface.setShaderInput('time', 0.0, 0.0, 0.0, 0.0)
ntex = loader.loadTexture(manager.get('paths').getConfig().find('textures').get('path')+'/water-normal.png')
ntex.setMinfilter(Texture.FTLinearMipmapLinear)
self.surface.setShaderInput('normal', ntex)
self.surface.setShaderInput('camera', base.cam)
self.surface.setTransparency(TransparencyAttrib.MDual, 10)
self.surface.setTwoSided(True)
self.surface.setShaderInput('waveInfo', Vec4(0.4, 0.4, 0.4, 0))
self.surface.setShaderInput('param2', Vec4(-0.015,0.005, 0.05, 0.05))
self.surface.setShaderInput('param3', Vec4(0.7, 0.3, 0, 0))
self.surface.setShaderInput('param4', Vec4(2.0, 0.5, 0.5, 0.0))
#self.surface.setShaderInput('speed', Vec4(-.8, -.4, -.9, .3))
self.surface.setShaderInput('speed', Vec4(0.2, -1.2, -0.2, -0.7))
self.surface.setShaderInput('deepcolor', Vec4(0.0,0.3,0.5,1.0))
self.surface.setShaderInput('shallowcolor', Vec4(0.0,1.0,1.0,1.0))
self.surface.setShaderInput('reflectioncolor', Vec4(0.95,1.0,1.0,1.0))
self.surface.hide()
self.wbuffer = base.win.makeTextureBuffer('water', 512, 512)
self.wbuffer.setClearColorActive(True)
self.wbuffer.setClearColor(base.win.getClearColor())
self.wcamera = base.makeCamera(self.wbuffer)
if manager.get('sky') != None and manager.get('sky').model != None:
self.sky = manager.get('sky').model.copyTo(self.wcamera)
self.sky.setTwoSided(True)
self.sky.setSz(self.sky, -1)
self.sky.setClipPlaneOff(1)
self.sky.show()
self.sky.hide(BitMask32.bit(0)) # Hide for normal camera
self.sky.hide(BitMask32.bit(2)) # Hide for volumetric lighting camera
self.sky.hide(BitMask32.bit(3)) # Hide for shadow camera(s), if any
else:
self.sky = None
self.wcamera.reparentTo(render)
self.wcamera.node().setLens(base.camLens)
self.wcamera.node().setCameraMask(BitMask32.bit(1))
self.surface.hide(BitMask32.bit(1))
wtexture = self.wbuffer.getTexture()
wtexture.setWrapU(Texture.WMClamp)
wtexture.setWrapV(Texture.WMClamp)
wtexture.setMinfilter(Texture.FTLinearMipmapLinear)
self.surface.setShaderInput('reflection', wtexture)
self.wplane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
self.wplanenp = render.attachNewNode(PlaneNode('water', self.wplane))
tmpnp = NodePath('StateInitializer')
tmpnp.setClipPlane(self.wplanenp)
tmpnp.setAttrib(CullFaceAttrib.makeReverse())
self.wcamera.node().setInitialState(tmpnp.getState())
#self.fog = Fog('UnderwaterFog')
#self.fog.setColor(0.0,0.3,0.5)
self.fogEnabled = False
def makeOrthographic(parent, name, campos):
v = Viewport(name, parent)
v.lens = OrthographicLens()
v.lens.setFilmSize(30)
v.camPos = campos
v.camLookAt = Point3(0, 0, 0)
v.grid = DirectGrid(parent=render)
if name == 'left':
v.grid.setHpr(0, 0, 90)
collPlane = CollisionNode('LeftGridCol')
collPlane.addSolid(CollisionPlane(Plane(1, 0, 0, 0)))
collPlane.setIntoCollideMask(BitMask32.bit(21))
v.collPlane = NodePath(collPlane)
v.collPlane.wrtReparentTo(v.grid)
#v.grid.gridBack.findAllMatches("**/+GeomNode")[0].setName("_leftViewGridBack")
LE_showInOneCam(v.grid, name)
elif name == 'front':
v.grid.setHpr(90, 0, 90)
collPlane = CollisionNode('FrontGridCol')
collPlane.addSolid(CollisionPlane(Plane(0, -1, 0, 0)))
collPlane.setIntoCollideMask(BitMask32.bit(21))
v.collPlane = NodePath(collPlane)
v.collPlane.wrtReparentTo(v.grid)
#v.grid.gridBack.findAllMatches("**/+GeomNode")[0].setName("_frontViewGridBack")
LE_showInOneCam(v.grid, name)
else:
collPlane = CollisionNode('TopGridCol')
collPlane.addSolid(CollisionPlane(Plane(0, 0, 1, 0)))
collPlane.setIntoCollideMask(BitMask32.bit(21))
v.collPlane = NodePath(collPlane)
v.collPlane.reparentTo(v.grid)
#v.grid.gridBack.findAllMatches("**/+GeomNode")[0].setName("_topViewGridBack")
LE_showInOneCam(v.grid, name)
return v
def __init__(self, x1, y1, x2, y2, z):
Att_base.__init__(self, False, "Water1")
# Water surface
maker = CardMaker( 'water' )
maker.setFrame( x1, x2, y1, y2 )
self.waterNP = render.attachNewNode(maker.generate())
self.waterNP.setHpr(0,-90,0)
self.waterNP.setPos(0,0,z)
self.waterNP.setTransparency(TransparencyAttrib.MAlpha )
self.waterNP.setShader(loader.loadShader( 'Shaders/water1.sha' ))
# Reflection plane
self.waterPlane = Plane( Vec3( 0, 0, z+1 ), Point3( 0, 0, z ) )
planeNode = PlaneNode( 'waterPlane' )
planeNode.setPlane( self.waterPlane )
# Buffer and reflection camera
self.buffer = base.win.makeTextureBuffer( 'waterBuffer', 512, 512 )
self.buffer.setClearColor( Vec4( 0, 0, 0, 1 ) )
cfa = CullFaceAttrib.makeReverse( )
rs = RenderState.make(cfa)
self.watercamNP = base.makeCamera( self.buffer )
self.watercamNP.reparentTo(render)
sa = ShaderAttrib.make()
sa = sa.setShader(loader.loadShader('Shaders/splut3Clipped.sha') )
self.cam = self.watercamNP.node()
self.cam.getLens( ).setFov( base.camLens.getFov( ) )
self.cam.getLens().setNear(1)
self.cam.getLens().setFar(5000)
self.cam.setInitialState( rs )
self.cam.setTagStateKey('Clipped')
self.cam.setTagState('True', RenderState.make(sa))
# ---- water textures ---------------------------------------------
# reflection texture, created in realtime by the 'water camera'
tex0 = self.buffer.getTexture( )
tex0.setWrapU(Texture.WMClamp)
tex0.setWrapV(Texture.WMClamp)
ts0 = TextureStage( 'reflection' )
self.waterNP.setTexture( ts0, tex0 )
# distortion texture
tex1 = loader.loadTexture('Textures/water.png')
ts1 = TextureStage('distortion')
self.waterNP.setTexture(ts1, tex1)
def Transform( self ):
startVec = self.startVec
axis = self.GetSelectedAxis()
print axis
if axis is not None and axis.vector == CAMERA_VECTOR:
endVec = self.getRelativeVector( render, self.GetAxisPoint( axis ) - self.getPos() )
cross = startVec.cross( endVec )
direction = self.getRelativeVector( self.camera, Vec3(0, -1, 0) ).dot( cross )
sign = math.copysign( 1, direction )
# Get the rotation axis
rotAxis = self.getRelativeVector( self.camera, Vec3(0, -1, 0) ) * sign
else:
if self.collEntry.getIntoNode() == self.initCollEntry.getIntoNode():
endVec = self.collEntry.getSurfaceNormal( self )
else:
endVec = self.getRelativeVector( render, self.GetAxisPoint( self.foobar ) - self.getPos() )
# If an axis is selected then constrain the vectors by projecting
# them onto a plane whose normal is the axis vector
if axis is not None:
plane = Plane( axis.vector, Point3( 0 ) )
startVec = Vec3( plane.project( Point3( startVec ) ) )
endVec = Vec3( plane.project( Point3( endVec ) ) )
# Get the rotation axis
rotAxis = endVec.cross( startVec ) * -1
# Return if the rotation vector is not valid, ie it does not have any
# length
if not rotAxis.length():
return
# Normalize all vectors
startVec.normalize()
endVec.normalize()
rotAxis.normalize()
# Get the amount of degrees to rotate
degs = startVec.angleDeg( endVec )
# Transform the gizmo if in local rotation mode
newRotMat = Mat4().rotateMat( degs, rotAxis )
if self.local:
self.setMat( newRotMat * self.getMat() )
# Transform all attached node paths
for i, np in enumerate( self.attachedNps ):
# Split the transform into scale, rotation and translation
# matrices
transMat, rotMat, scaleMat = commonUtils.GetTrsMatrices( np.getTransform() )
# Perform transforms in local or world space
if self.local:
np.setMat( scaleMat * newRotMat * rotMat * transMat )
else:
self.initNpXforms[i].getQuat().extractToMatrix( rotMat )
np.setMat( scaleMat * rotMat * newRotMat * transMat )
def __init__(self, parent, entity, foot=1):
self.entity = entity
self._moveRadCircleNP = NodePath("Movement Radius Node")
self._moveLine = LineSegs()
self._moveLineNP = NodePath("Movement Direction Line Node")
self._moveZLine = LineSegs()
self._moveZLineNP = NodePath("Movement Z Line Node")
self._moveZFootNP = NodePath("Movement Z Foot Node")
self._moveFootCircle = LineSegs()
self._moveFootCircleNP = NodePath("Movement Foot Circle Node")
self._attackRadCircle = LineSegs()
self._attackRadCircleNP= NodePath("Attack Radius Node")
self._np = NodePath("Movement Node")
self.attackables = []
Event.Dispatcher().register(self, 'E_Key_ZUp', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZDown', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZUp-up', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZDown-up', self.onZChange)
self.aaLevel= int(GameSettings().getSetting('ANTIALIAS'))
self.parent = parent
self.start = Vec3(0, 0, 0)
self.moveRad = entity.moveRad
self.footRad = foot
self.attackRad = entity.attackRad
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
self.draw()
self._np.reparentTo(self.parent)
if self.aaLevel > 0:
self._np.setAntialias(AntialiasAttrib.MLine, self.aaLevel)
taskMgr.add(self.updateMovePos, 'Movement Indicator Update Task')
def _initCollisions(self):
self.collPlane = CollisionPlane(Plane(Vec3(0, 0, 1.0), Point3(0, 0, 10)))
self.collPlane.setTangible(0)
self.collNode = CollisionNode('fogPlane')
self.collNode.setIntoCollideMask(OTPGlobals.FloorBitmask)
self.collNode.addSolid(self.collPlane)
self.collNodePath = self.root.attachNewNode(self.collNode)
self.collNodePath.hide()
def Collision(self):
self.mpos3d=0
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
base.cTrav = CollisionTraverser()
self.collHandler = CollisionHandlerQueue()
self.pickerNode = CollisionNode('mouseRay')
self.pickerNP = camera.attachNewNode(self.pickerNode)
self.pickerNode.setFromCollideMask(GeomNode.getDefaultCollideMask())
self.pickerRay = CollisionRay()
self.pickerNode.addSolid(self.pickerRay)
base.cTrav.addCollider(self.pickerNP, self.collHandler)
def makeWater(self):
self.water = loader.loadModel("models/water.egg")
self.water.setPos(0,0,1)
self.water.setShader(loader.loadShader('shaders/water.sha'))
self.water.setShaderInput('wateranim', Vec4(0.03, -0.015, 64.0, 0))
self.water.setShaderInput('waterdistort', Vec4(0.4, 4.0, 0.25, 0.45))
self.water.setShaderInput('time', 0)
buffer = base.win.makeTextureBuffer('waterBuffer', 512, 512)
#buffer.setClearColor(Vec4(0.3, 0.3, 1, 1))
cfa = CullFaceAttrib.makeReverse()
rs = RenderState.make(cfa)
self.watercamNP = base.makeCamera(buffer)
self.watercamNP.reparentTo(render)
cam = self.watercamNP.node()
cam.getLens().setFov(base.camLens.getFov())
cam.getLens().setNear(1)
cam.getLens().setFar(5000)
cam.setInitialState(rs)
self.waterPlane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
planeNode = PlaneNode('waterPlane')
planeNode.setPlane(self.waterPlane)
#cam.lookAt(0,0,-1)
cam.setTagStateKey('Clipped')
tex0 = buffer.getTexture()
tex0.setWrapU(Texture.WMClamp)
tex0.setWrapV(Texture.WMClamp)
ts0 = TextureStage('reflection')
self.water.setTexture(ts0, tex0)
tex1 = loader.loadTexture('texture/water.png')
ts1 = TextureStage('distortion')
self.water.setTexture(ts1, tex1)
self.keyMap={};
self.keyMap["sit"]=0
self.keyMap["call"]=0
self.keyMap["left"]=0
self.keyMap["forward"]=0
self.keyMap["right"]=0
taskMgr.add(self.waterUpdate, "waterTask")
taskMgr.add(self.cameraControl,"cameraControl")
self.water.reparentTo(render)
def GetMousePlaneCollisionPoint( self, pos, nrml ):
"""
Return the collision point of a ray fired through the mouse and a
plane with the specified normal.
"""
# Fire a ray from the camera through the mouse
mp = self.mouseWatcherNode.getMouse()
p1 = Point3()
p2 = Point3()
self.camera.node().getLens().extrude( mp, p1, p2 )
p1 = self.rootNp.getRelativePoint( self.camera, p1 )
p2 = self.rootNp.getRelativePoint( self.camera, p2 )
# Get the point of intersection with a plane with the normal
# specified
p = Point3()
Plane( nrml, pos ).intersectsLine( p, p1, p2 )
return p
def setupCollision(self):
# create collision traverser
self.picker = CollisionTraverser()
# create collision handler
self.pq = CollisionHandlerQueue()
# create collision node
self.pickerNode = CollisionNode('mouseRay') # create collision node
# attach new collision node to camera node
self.pickerNP = camera.attachNewNode(
self.pickerNode) # attach collision node to camera
# set bit mask to one
self.pickerNode.setFromCollideMask(BitMask32.bit(1)) # set bit mask
# create a collision ray
self.pickerRay = CollisionRay() # create collision ray
# add picker ray to the picker node
self.pickerNode.addSolid(
self.pickerRay) # add the collision ray to the collision node
# make the traverser know about the picker node and its even handler queue
self.picker.addCollider(
self.pickerNP,
self.pq) # add the colision node path and collision handler queue
#self.picker.showCollisions( render ) # render or draw the collisions
#self.pickerNP.show( ) # render picker ray
# create col node
self.colPlane = CollisionNode('colPlane')
# add solid to col node plane
self.colPlane.addSolid(
CollisionPlane(Plane(Vec3(0, 0, 1), Point3(0, 0, 0))))
# attach new node to the render
self.colPlanePath = render.attachNewNode(self.colPlane)
#self.colPlanePath.show( ) # render node
# make the col plane look at the camera
# this makes it alway look at the camera no matter the orientation
# we need this because the ray nees to intersect a plane parallel
# to the camera
self.colPlanePath.lookAt(camera)
# prop up the col plane
self.colPlanePath.setP(-45)
# set bit mask to one
# as I understand it, this makes all col nodes with bit mask one
# create collisions while ignoring others of other masks
self.colPlanePath.node().setIntoCollideMask(BitMask32.bit(1))
def createGuiObjects(self):
self.dayButton = DirectButton(parent=self.dayButtonLocator, image=self.selectedFrame, relief=None, command=self.__clickedOnDay, pressEffect=1, rolloverSound=None, clickSound=None)
self.numberWidget = DirectLabel(parent=self.numberLocator, relief=None, text=str(self.myDate.day), text_scale=0.04, text_align=TextNode.ACenter, text_font=ToontownGlobals.getInterfaceFont(), text_fg=Vec4(110 / 255.0, 126 / 255.0, 255 / 255.0, 1))
self.attachMarker(self.numberLocator)
self.listXorigin = 0
self.listFrameSizeX = self.scrollBottomRightLocator.getX() - self.scrollLocator.getX()
self.scrollHeight = self.scrollLocator.getZ() - self.scrollBottomRightLocator.getZ()
self.listZorigin = self.scrollBottomRightLocator.getZ()
self.listFrameSizeZ = self.scrollLocator.getZ() - self.scrollBottomRightLocator.getZ()
self.arrowButtonXScale = 1
self.arrowButtonZScale = 1
self.itemFrameXorigin = 0
self.itemFrameZorigin = 0
self.buttonXstart = self.itemFrameXorigin + 0.21
self.gui = loader.loadModel('phase_3.5/models/gui/friendslist_gui')
buttonOffSet = -0.01
incButtonPos = (0.0, 0, 0)
decButtonPos = (0.0, 0, 0)
itemFrameMinZ = self.listZorigin
itemFrameMaxZ = self.listZorigin + self.listFrameSizeZ
arrowUp = self.find('**/downScroll_up')
arrowDown = self.find('**/downScroll_down')
arrowHover = self.find('**/downScroll_hover')
self.scrollList = DirectScrolledList(parent=self.scrollLocator, relief=None, pos=(0, 0, 0), incButton_image=(arrowUp,
arrowDown,
arrowHover,
arrowUp), incButton_relief=None, incButton_scale=(self.arrowButtonXScale, 1, self.arrowButtonZScale), incButton_pos=incButtonPos, incButton_image3_color=Vec4(1, 1, 1, 0.2), decButton_image=(arrowUp,
arrowDown,
arrowHover,
arrowUp), decButton_relief=None, decButton_scale=(self.arrowButtonXScale, 1, -self.arrowButtonZScale), decButton_pos=decButtonPos, decButton_image3_color=Vec4(1, 1, 1, 0.2), itemFrame_pos=(self.itemFrameXorigin, 0, -0.03), numItemsVisible=4, incButtonCallback=self.scrollButtonPressed, decButtonCallback=self.scrollButtonPressed)
itemFrameParent = self.scrollList.itemFrame.getParent()
self.scrollList.incButton.reparentTo(self.scrollDownLocator)
self.scrollList.decButton.reparentTo(self.scrollUpLocator)
arrowUp.removeNode()
arrowDown.removeNode()
arrowHover.removeNode()
clipper = PlaneNode('clipper')
clipper.setPlane(Plane(Vec3(-1, 0, 0), Point3(0.23, 0, 0)))
clipNP = self.scrollList.component('itemFrame').attachNewNode(clipper)
self.scrollList.component('itemFrame').setClipPlane(clipNP)
return
def __init__(self, game_data, gfx_manager):
self.game_data = game_data
self.gui_traverser = CollisionTraverser()
self.handler = CollisionHandlerQueue()
self.selectable_objects = {}
for cid, model in gfx_manager.character_models.items():
new_collision_node = CollisionNode('person_' + str(cid))
new_collision_node.addSolid(
CollisionTube(0, 0, 0.5, 0, 0, 1.5, 0.5))
new_collision_nodepath = model.attachNewNode(new_collision_node)
new_collision_nodepath.setTag("type", "character")
new_collision_nodepath.setTag("id", str(cid))
picker_node = CollisionNode('mouseRay')
picker_np = camera.attachNewNode(picker_node)
self.picker_ray = CollisionRay()
picker_node.addSolid(self.picker_ray)
self.gui_traverser.addCollider(picker_np, self.handler)
self.floor = CollisionPlane(Plane(Vec3(0, 0, 1), Point3(0, 0, 0)))
self.floor_np = render.attachNewNode(CollisionNode('floor'))
self.floor_np.setTag("type", "ground")
self.floor_np.node().addSolid(self.floor)
class MoveCursor(object):
_EDGES = 40
_zPos = 0
_movingUp = False
_movingDown = False
_color = Vec4(0.3, 0.3, 0.8, 1)
_currentPos = Vec3(0, 0, 0)
def __init__(self, parent, entity, foot=1):
self.entity = entity
self._moveRadCircleNP = NodePath("Movement Radius Node")
self._moveLine = LineSegs()
self._moveLineNP = NodePath("Movement Direction Line Node")
self._moveZLine = LineSegs()
self._moveZLineNP = NodePath("Movement Z Line Node")
self._moveZFootNP = NodePath("Movement Z Foot Node")
self._moveFootCircle = LineSegs()
self._moveFootCircleNP = NodePath("Movement Foot Circle Node")
self._attackRadCircle = LineSegs()
self._attackRadCircleNP = NodePath("Attack Radius Node")
self._np = NodePath("Movement Node")
self.attackables = []
Event.Dispatcher().register(self, 'E_Key_ZUp', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZDown', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZUp-up', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZDown-up', self.onZChange)
self.aaLevel = int(GameSettings().getSetting('ANTIALIAS'))
self.parent = parent
self.start = Vec3(0, 0, 0)
self.moveRad = entity.moveRad
self.footRad = foot
self.attackRad = entity.attackRad
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
self.draw()
self._np.reparentTo(self.parent)
if self.aaLevel > 0:
self._np.setAntialias(AntialiasAttrib.MLine, self.aaLevel)
taskMgr.add(self.updateMovePos, 'Movement Indicator Update Task')
def draw(self):
# Setup curr mouse pos in 3d space
posXY = self.getMouseXY()
x = posXY.getX()
y = posXY.getY()
z = 0
# Draw movement radius
moveRadLine = LineSegs()
moveRadLine.setThickness(1)
moveRadLine.setColor(self._color)
moveRadLine.moveTo(self.moveRad, 0, 0)
for i in range(self._EDGES + 1):
newX = (self.moveRad * math.cos((2 * math.pi / self._EDGES) * i))
newY = (self.moveRad * math.sin((2 * math.pi / self._EDGES) * i))
moveRadLine.drawTo(newX, newY, 0)
moveRadGeom = moveRadLine.create()
self._moveRadCircleNP = NodePath(moveRadGeom)
self._moveRadCircleNP.reparentTo(self._np)
# Draw movement foot circle
self._moveFootCircle.setThickness(1)
self._moveFootCircle.setColor(self._color)
self._moveFootCircle.moveTo(self.footRad, 0, 0)
for i in range(self._EDGES):
newX = (self.footRad * math.cos((2 * math.pi / self._EDGES) * i))
newY = (self.footRad * math.sin((2 * math.pi / self._EDGES) * i))
self._moveFootCircle.drawTo(newX, newY, 0)
self._moveFootCircle.drawTo(self.footRad, 0, 0)
moveFootCircleGeom = self._moveFootCircle.create()
self._moveFootCircleNP = NodePath(moveFootCircleGeom)
self._moveFootCircleNP.reparentTo(self._np)
# Draw movement direction line
self._moveLine.setThickness(1)
self._moveLine.setColor(self._color)
self._moveLine.moveTo(0, 0, 0)
self._moveLine.drawTo(x, y, z)
moveLine = self._moveLine.create()
self._moveLineNP = NodePath(moveLine)
self._moveLineNP.reparentTo(self._np)
# Draw Z line
self._moveZLine.setThickness(1)
self._moveZLine.setColor(self._color)
self._moveZLine.moveTo(self.start)
self._moveZLine.drawTo(x, y, z)
moveZLine = self._moveZLine.create()
self._moveZLineNP = NodePath(moveZLine)
self._moveZLineNP.reparentTo(self._np)
# Draw Attack Radius
self._attackRadCircle.setThickness(1)
self._attackRadCircle.setColor(0.8, 0.0, 0.0, 1)
self._attackRadCircle.moveTo(self.attackRad, 0, 0)
for i in range(self._EDGES + 1):
newX = (self.attackRad * math.cos((2 * math.pi / self._EDGES) * i))
newY = (self.attackRad * math.sin((2 * math.pi / self._EDGES) * i))
self._attackRadCircle.drawTo(newX, newY, 0)
attackRadCircleGeom = self._attackRadCircle.create()
self._attackRadCircleNP = NodePath(attackRadCircleGeom)
self._attackRadCircleNP.reparentTo(self._np)
def updateMovePos(self, Task):
# endPos must be transformed in the the coord sys of the model
m_pos = self.getMouseXY()
if m_pos is not None:
# Transform current mouse pos
endPos = self.parent.getRelativePoint(render, m_pos)
# Adjust Z coord if needed
if self._movingUp:
self._zPos += 0.1
elif self._movingDown:
self._zPos -= 0.1
endPos.setZ(self._zPos)
# Check if we're trying to move too far, if not update pos
dist = math.sqrt(endPos.getX()**2 + endPos.getY()**2 + 2 *
(endPos.getZ()**2))
if dist <= self.moveRad:
self._moveLine.setVertex(1, endPos)
self._moveFootCircleNP.setPos(endPos)
self._moveZLine.setVertex(
0, Point3(endPos.getX(), endPos.getY(), 0))
self._moveZLine.setVertex(1, endPos)
self._attackRadCircleNP.setPos(endPos)
self._currentPos = render.getRelativePoint(self._np, endPos)
# Check for attackable ships in range of current pos
attackables = Entity.EntityManager().getEntitiesWithin(
self._currentPos, self.attackRad)
# Unhighlight ships no longer in range
for e in self.attackables:
if e not in attackables and isinstance(
e, Entity.EntityShip):
e.representation.unsetAttackable()
# Highlight ships in range
for e in attackables:
if isinstance(
e, Entity.EntityShip
) and e != self.entity and e.owner != self.entity.owner:
e.representation.setAttackable()
self.attackables = attackables
return Task.cont
def onZChange(self, event):
if event.type == 'E_Key_ZUp':
self._movingDown = False
self._movingUp = True
if event.type == 'E_Key_ZDown':
self._movingUp = False
self._movingDown = True
if event.type == 'E_Key_ZUp-up':
self._movingUp = False
self._movingDown = False
if event.type == 'E_Key_ZDown-up':
self._movingUp = False
self._movingDown = False
def getMouseXY(self):
# NOTE - this returns the mouse pos in the ships coord sys
if base.mouseWatcherNode.hasMouse():
mpos = base.mouseWatcherNode.getMouse()
pos3d = Point3()
nearPoint = Point3()
farPoint = Point3()
base.camLens.extrude(mpos, nearPoint, farPoint)
if self.plane.intersectsLine(
pos3d, render.getRelativePoint(camera, nearPoint),
render.getRelativePoint(camera, farPoint)):
#print("Mouse ray intersects ground plane at " + str(pos3d))
return pos3d
def getPosition(self):
return self._currentPos
def removeNode(self):
taskMgr.remove('Movement Indicator Update Task')
for e in self.attackables:
if isinstance(e, Entity.EntityShip):
e.representation.unsetAttackable()
self._moveRadCircleNP.removeNode()
self._moveLineNP.removeNode()
self._moveZLineNP.removeNode()
self._moveZFootNP.removeNode()
self._moveFootCircleNP.removeNode()
self._attackRadCircleNP.removeNode()
self._np.removeNode()
def __del__(self):
# TODO - This isn't calling self.removeNode() correctly
self._np.removeNode()
class WaterNode(Att_base):
def __init__(self, x1, y1, x2, y2, z):
Att_base.__init__(self, False, "Water1")
# Water surface
maker = CardMaker( 'water' )
maker.setFrame( x1, x2, y1, y2 )
self.waterNP = render.attachNewNode(maker.generate())
self.waterNP.setHpr(0,-90,0)
self.waterNP.setPos(0,0,z)
self.waterNP.setTransparency(TransparencyAttrib.MAlpha )
self.waterNP.setShader(loader.loadShader( 'Shaders/water1.sha' ))
# Reflection plane
self.waterPlane = Plane( Vec3( 0, 0, z+1 ), Point3( 0, 0, z ) )
planeNode = PlaneNode( 'waterPlane' )
planeNode.setPlane( self.waterPlane )
# Buffer and reflection camera
self.buffer = base.win.makeTextureBuffer( 'waterBuffer', 512, 512 )
self.buffer.setClearColor( Vec4( 0, 0, 0, 1 ) )
cfa = CullFaceAttrib.makeReverse( )
rs = RenderState.make(cfa)
self.watercamNP = base.makeCamera( self.buffer )
self.watercamNP.reparentTo(render)
sa = ShaderAttrib.make()
sa = sa.setShader(loader.loadShader('Shaders/splut3Clipped.sha') )
self.cam = self.watercamNP.node()
self.cam.getLens( ).setFov( base.camLens.getFov( ) )
self.cam.getLens().setNear(1)
self.cam.getLens().setFar(5000)
self.cam.setInitialState( rs )
self.cam.setTagStateKey('Clipped')
self.cam.setTagState('True', RenderState.make(sa))
# ---- water textures ---------------------------------------------
# reflection texture, created in realtime by the 'water camera'
tex0 = self.buffer.getTexture( )
tex0.setWrapU(Texture.WMClamp)
tex0.setWrapV(Texture.WMClamp)
ts0 = TextureStage( 'reflection' )
self.waterNP.setTexture( ts0, tex0 )
# distortion texture
tex1 = loader.loadTexture('Textures/water.png')
ts1 = TextureStage('distortion')
self.waterNP.setTexture(ts1, tex1)
def removeNode(self):
self.cam.setInitialState(RenderState.makeEmpty())
self.watercamNP.removeNode()
self.waterNP.clearShader()
self.waterNP.removeNode()
def Destroy(self):
base.graphicsEngine.removeWindow(self.buffer)
self.cam.setInitialState(RenderState.makeEmpty())
self.watercamNP.removeNode()
self.waterNP.clearShader()
self.waterNP.removeNode()
def setParams(self, offset, strength, refractionfactor, refractivity, vx, vy, scale):
self.waterNP.setShaderInput('waterdistort', Vec4( offset, strength, refractionfactor, refractivity ))
self.waterNP.setShaderInput('wateranim', Vec4( vx, vy, scale, 0 )) # vx, vy, scale, skip
def changeCameraPos(self, pos, mc=None):
if mc != None:
# update matrix of the reflection camera
mf = self.waterPlane.getReflectionMat( )
self.watercamNP.setMat(mc * mf)
def changeParams(self, object):
self.setParams(self.att_offset.v,self.att_strength.v,self.att_refractionfactor.v,self.att_refractivity.v,
self.att_vx.v, self.att_vy.v, self.att_scale.v)
def setStandardControl(self):
self.att_offset = Att_FloatRange(False, "Water:Offset", 0.0, 1.0, 0.4)
self.att_strength = Att_FloatRange(False, "Water:Strength", 0.0, 100.0, 4)
self.att_refractionfactor = Att_FloatRange(False, "Water:Refraction Factor", 0.0, 1.0, 0.2)
self.att_refractivity = Att_FloatRange(False, "Water:Refractivity", 0.0, 1.0, 0.45)
self.att_vx = Att_FloatRange(False, "Water:Speed X", -1.0, 1.0, 0.1)
self.att_vy = Att_FloatRange(False, "Water:Speed Y", -1.0, 1.0, -0.1)
self.att_scale = Att_FloatRange(False, "Water:Scale", 1.0, 200.0, 64.0,0)
self.att_offset.setNotifier(self.changeParams)
self.att_strength.setNotifier(self.changeParams)
self.att_refractionfactor.setNotifier(self.changeParams)
self.att_refractivity.setNotifier(self.changeParams)
self.att_vx.setNotifier(self.changeParams)
self.att_vy.setNotifier(self.changeParams)
self.att_scale.setNotifier(self.changeParams)
self.changeParams(None)
def hide(self):
self.waterNP.hide()
def show(self):
self.waterNP.show()
def setFov(self, fov):
# the reflection cam has to follow the base.cam fov
self.cam.getLens().setFov(fov)
def setCubeMap(self, cubemapfile):
pass
def __init__(self, manager, xml):
self.surface = getWaterSurface(manager)
self.surface.reparentTo(render)
self.surface.hide(BitMask32.bit(1)) # Invisible to reflection camera (speedup)
self.surface.hide(BitMask32.bit(2)) # Invisible to volumetric lighting camera (speedup)
self.surface.hide(BitMask32.bit(3)) # Invisible to shadow cameras (speedup)
self.surface.setShader(
loader.loadShader(manager.get("paths").getConfig().find("shaders").get("path") + "/water.cg")
)
self.surface.setShaderInput("time", 0.0, 0.0, 0.0, 0.0)
ntex = loader.loadTexture(manager.get("paths").getConfig().find("textures").get("path") + "/water-normal.png")
ntex.setMinfilter(Texture.FTLinearMipmapLinear)
self.surface.setShaderInput("normal", ntex)
self.surface.setShaderInput("camera", base.cam)
self.surface.setTransparency(TransparencyAttrib.MDual, 10)
self.surface.setTwoSided(True)
self.surface.setShaderInput("waveInfo", Vec4(0.4, 0.4, 0.4, 0))
self.surface.setShaderInput("param2", Vec4(-0.015, 0.005, 0.05, 0.05))
self.surface.setShaderInput("param3", Vec4(0.7, 0.3, 0, 0))
self.surface.setShaderInput("param4", Vec4(2.0, 0.5, 0.5, 0.0))
# self.surface.setShaderInput('speed', Vec4(-.8, -.4, -.9, .3))
self.surface.setShaderInput("speed", Vec4(0.2, -1.2, -0.2, -0.7))
self.surface.setShaderInput("deepcolor", Vec4(0.0, 0.3, 0.5, 1.0))
self.surface.setShaderInput("shallowcolor", Vec4(0.0, 1.0, 1.0, 1.0))
self.surface.setShaderInput("reflectioncolor", Vec4(0.95, 1.0, 1.0, 1.0))
self.surface.hide()
self.wbuffer = base.win.makeTextureBuffer("water", 512, 512)
self.wbuffer.setClearColorActive(True)
self.wbuffer.setClearColor(base.win.getClearColor())
self.wcamera = base.makeCamera(self.wbuffer)
if manager.get("sky") != None and manager.get("sky").model != None:
self.sky = manager.get("sky").model.copyTo(self.wcamera)
self.sky.setTwoSided(True)
self.sky.setSz(self.sky, -1)
self.sky.setClipPlaneOff(1)
self.sky.show()
self.sky.hide(BitMask32.bit(0)) # Hide for normal camera
self.sky.hide(BitMask32.bit(2)) # Hide for volumetric lighting camera
self.sky.hide(BitMask32.bit(3)) # Hide for shadow camera(s), if any
else:
self.sky = None
self.wcamera.reparentTo(render)
self.wcamera.node().setLens(base.camLens)
self.wcamera.node().setCameraMask(BitMask32.bit(1))
self.surface.hide(BitMask32.bit(1))
wtexture = self.wbuffer.getTexture()
wtexture.setWrapU(Texture.WMClamp)
wtexture.setWrapV(Texture.WMClamp)
wtexture.setMinfilter(Texture.FTLinearMipmapLinear)
self.surface.setShaderInput("reflection", wtexture)
self.wplane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
self.wplanenp = render.attachNewNode(PlaneNode("water", self.wplane))
tmpnp = NodePath("StateInitializer")
tmpnp.setClipPlane(self.wplanenp)
tmpnp.setAttrib(CullFaceAttrib.makeReverse())
self.wcamera.node().setInitialState(tmpnp.getState())
# self.fog = Fog('UnderwaterFog')
# self.fog.setColor(0.0,0.3,0.5)
self.fogEnabled = False
def __init__(self, parent, entity, foot=1):
# We keep a reference to the entity
self.entity = entity
# Setup the components of the cursor
self._moveRadCircleNP = NodePath("Movement Radius Node")
self._moveLine = LineSegs()
self._moveLineNP = NodePath("Movement Direction Line Node")
self._moveZLine = LineSegs()
self._moveZLineNP = NodePath("Movement Z Line Node")
self._moveZFootNP = NodePath("Movement Z Foot Node")
self._moveFootCircle = LineSegs()
self._moveFootCircleNP = NodePath("Movement Foot Circle Node")
self._np = NodePath("Movement Node")
self.aaLevel = 16
self.parent = parent
self.start = Vec3(0, 0, 0)
self.moveRad = entity.moveRadius
self.footRad = foot
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
if self.aaLevel > 0:
self._np.setAntialias(AntialiasAttrib.MLine, self.aaLevel)
x = 0
y = 0
z = 0
# Draw movement radius
moveRadLine = LineSegs()
moveRadLine.setThickness(1)
moveRadLine.setColor(self._color)
moveRadLine.moveTo(self.moveRad, 0, 0)
for i in range(self._EDGES + 1):
newX = (self.moveRad * math.cos((2*math.pi/self._EDGES)*i))
newY = (self.moveRad * math.sin((2*math.pi/self._EDGES)*i))
moveRadLine.drawTo(newX, newY, 0)
moveRadGeom = moveRadLine.create()
self._moveRadCircleNP = NodePath(moveRadGeom)
self._moveRadCircleNP.reparentTo(self._np)
# Draw movement foot circle
self._moveFootCircle.setThickness(1)
self._moveFootCircle.setColor(self._color)
self._moveFootCircle.moveTo(self.footRad, 0, 0)
for i in range(self._EDGES):
newX = (self.footRad * math.cos((2*math.pi/self._EDGES)*i))
newY = (self.footRad * math.sin((2*math.pi/self._EDGES)*i))
self._moveFootCircle.drawTo(newX, newY, 0)
self._moveFootCircle.drawTo(self.footRad, 0, 0)
moveFootCircleGeom = self._moveFootCircle.create()
self._moveFootCircleNP = NodePath(moveFootCircleGeom)
self._moveFootCircleNP.reparentTo(self._np)
# Draw movement direction line
self._moveLine.setThickness(1)
self._moveLine.setColor(self._color)
self._moveLine.moveTo(0, 0, 0)
self._moveLine.drawTo(x, y, z)
self.moveLineGO = self._moveLine.create(True)
self._moveLineNP = NodePath(self.moveLineGO)
self._moveLineNP.reparentTo(self._np)
class MoveCursor(object):
_EDGES = 40
_zPos = 0
_movingUp = False
_movingDown = False
_color = Vec4(0.3, 0.3, 0.8, 1)
_currentPos = Vec3(0, 0, 0)
def __init__(self, parent, entity, foot=1):
# We keep a reference to the entity
self.entity = entity
# Setup the components of the cursor
self._moveRadCircleNP = NodePath("Movement Radius Node")
self._moveLine = LineSegs()
self._moveLineNP = NodePath("Movement Direction Line Node")
self._moveZLine = LineSegs()
self._moveZLineNP = NodePath("Movement Z Line Node")
self._moveZFootNP = NodePath("Movement Z Foot Node")
self._moveFootCircle = LineSegs()
self._moveFootCircleNP = NodePath("Movement Foot Circle Node")
self._np = NodePath("Movement Node")
self.aaLevel = 16
self.parent = parent
self.start = Vec3(0, 0, 0)
self.moveRad = entity.moveRadius
self.footRad = foot
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
if self.aaLevel > 0:
self._np.setAntialias(AntialiasAttrib.MLine, self.aaLevel)
x = 0
y = 0
z = 0
# Draw movement radius
moveRadLine = LineSegs()
moveRadLine.setThickness(1)
moveRadLine.setColor(self._color)
moveRadLine.moveTo(self.moveRad, 0, 0)
for i in range(self._EDGES + 1):
newX = (self.moveRad * math.cos((2*math.pi/self._EDGES)*i))
newY = (self.moveRad * math.sin((2*math.pi/self._EDGES)*i))
moveRadLine.drawTo(newX, newY, 0)
moveRadGeom = moveRadLine.create()
self._moveRadCircleNP = NodePath(moveRadGeom)
self._moveRadCircleNP.reparentTo(self._np)
# Draw movement foot circle
self._moveFootCircle.setThickness(1)
self._moveFootCircle.setColor(self._color)
self._moveFootCircle.moveTo(self.footRad, 0, 0)
for i in range(self._EDGES):
newX = (self.footRad * math.cos((2*math.pi/self._EDGES)*i))
newY = (self.footRad * math.sin((2*math.pi/self._EDGES)*i))
self._moveFootCircle.drawTo(newX, newY, 0)
self._moveFootCircle.drawTo(self.footRad, 0, 0)
moveFootCircleGeom = self._moveFootCircle.create()
self._moveFootCircleNP = NodePath(moveFootCircleGeom)
self._moveFootCircleNP.reparentTo(self._np)
# Draw movement direction line
self._moveLine.setThickness(1)
self._moveLine.setColor(self._color)
self._moveLine.moveTo(0, 0, 0)
self._moveLine.drawTo(x, y, z)
self.moveLineGO = self._moveLine.create(True)
self._moveLineNP = NodePath(self.moveLineGO)
self._moveLineNP.reparentTo(self._np)
def updateMovePos(self, Task):
# endPos must be transformed in the the coord sys of the model
m_pos = self.getMouseXY()
if m_pos is not None:
# Transform current mouse pos
endPos = self.parent.getRelativePoint(render, m_pos)
# Adjust Z coord if needed
if self._movingUp:
self._zPos += 0.1
elif self._movingDown:
self._zPos -= 0.1
endPos.setZ(self._zPos)
# Check if we're trying to move too far, if not update pos
dist = math.sqrt(endPos.getX()**2 + endPos.getY()**2 + 2*(endPos.getZ()**2))
if dist <= self.moveRad:
self._moveLine.setVertex(1, endPos)
self._moveFootCircleNP.setPos(endPos)
#self._currentPos = self.parent.getRelativePoint(self.parent, endPos)
#print("endPos=%s"%endPos)
#print("myRelPos=%s"%self._currentPos)
self._currentPos = endPos
return Task.cont
def getMouseXY(self):
# NOTE - this returns the mouse pos in the ships coord sys
if base.mouseWatcherNode.hasMouse():
mpos = base.mouseWatcherNode.getMouse()
pos3d = Point3()
nearPoint = Point3()
farPoint = Point3()
base.camLens.extrude(mpos, nearPoint, farPoint)
if self.plane.intersectsLine(pos3d,
render.getRelativePoint(camera, nearPoint),
render.getRelativePoint(camera, farPoint)):
return pos3d
return None
def getPosition(self):
return self._currentPos
def startDrawing(self):
self._np.reparentTo(self.parent)
taskMgr.add(self.updateMovePos, 'Movement Indicator Update Task')
def stopDrawing(self):
taskMgr.remove('Movement Indicator Update Task')
self._np.detachNode()
def __init__(self, world, x1, y1, x2, y2, z):
self.world = world
logging.info(('setting up water plane at z=' + str(z)))
# Water surface
maker = CardMaker('water')
maker.setFrame(x1, x2, y1, y2)
self.waterNP = render.attachNewNode(maker.generate())
self.waterNP.setHpr(0, -90, 0)
self.waterNP.setPos(0, 0, z)
self.waterNP.setTransparency(TransparencyAttrib.MAlpha)
self.waterNP.setShader(loader.loadShader('shaders/water.sha'))
self.waterNP.setShaderInput('wateranim', Vec4(0.03, -0.015, 64.0, 0)) # vx, vy, scale, skip
# offset, strength, refraction factor (0=perfect mirror, 1=total refraction), refractivity
self.waterNP.setShaderInput('waterdistort', Vec4(0.4, 4.0, 0.25, 0.45))
self.waterNP.setShaderInput('time', 0)
# Reflection plane
self.waterPlane = Plane(Vec3(0, 0, z + 1), Point3(0, 0, z))
planeNode = PlaneNode('waterPlane')
planeNode.setPlane(self.waterPlane)
# Buffer and reflection camera
buffer = base.win.makeTextureBuffer('waterBuffer', 512, 512)
buffer.setClearColor(Vec4(0, 0, 0, 1))
cfa = CullFaceAttrib.makeReverse()
rs = RenderState.make(cfa)
self.watercamNP = base.makeCamera(buffer)
self.watercamNP.reparentTo(render)
#sa = ShaderAttrib.make()
#sa = sa.setShader(loader.loadShader('shaders/splut3Clipped.sha') )
cam = self.watercamNP.node()
cam.getLens().setFov(base.camLens.getFov())
cam.getLens().setNear(1)
cam.getLens().setFar(5000)
cam.setInitialState(rs)
cam.setTagStateKey('Clipped')
#cam.setTagState('True', RenderState.make(sa))
# ---- water textures -----------------------------------------------
#reflection texture, created in realtime by the 'water camera'
tex0 = buffer.getTexture()
tex0.setWrapU(Texture.WMClamp)
tex0.setWrapV(Texture.WMClamp)
ts0 = TextureStage('reflection')
self.waterNP.setTexture(ts0, tex0)
# distortion texture
tex1 = loader.loadTexture('textures/water.png')
ts1 = TextureStage('distortion')
self.waterNP.setTexture(ts1, tex1)
# ---- Fog --- broken
min = Point3(x1, y1, -999.0)
max = Point3(x2, y2, z)
boundry = BoundingBox(min, max
self.waterFog = Fog('waterFog')
self.waterFog.setBounds(boundry)
colour = (0.2, 0.5, 0.8)
self.waterFog.setColor(*colour)
self.waterFog.setExpDensity(0.05)
render.attachNewNode(self.waterFog)
#render.setFog(world.waterFog)
taskMgr.add(self.update, "waterTask")
def update(self, task):
# update matrix of the reflection camera
mc = base.camera.getMat()
mf = self.waterPlane.getReflectionMat()
self.watercamNP.setMat(mc * mf)
self.waterNP.setShaderInput('time', task.time)
self.waterNP.setX(self.world.ralph.getX())
self.waterNP.setY(self.world.ralph.getY())
return task.cont
def Transform( self ):
startVec = self.startVec
axis = self.GetSelectedAxis()
if axis is not None and axis.vector == CAMERA_VECTOR:
endVec = self.getRelativeVector( self.rootNp, self.GetAxisPoint( axis ) - self.getPos() )
cross = startVec.cross( endVec )
direction = self.getRelativeVector( self.camera, Vec3(0, -1, 0) ).dot( cross )
sign = math.copysign( 1, direction )
# Get the rotation axis
rotAxis = self.getRelativeVector( self.camera, Vec3(0, -1, 0) ) * sign
else:
if self.collEntry.getIntoNode() == self.initCollEntry.getIntoNode():
endVec = self.collEntry.getSurfaceNormal( self )
else:
endVec = self.getRelativeVector( self.rootNp, self.GetAxisPoint( self.foobar ) - self.getPos() )
# If an axis is selected then constrain the vectors by projecting
# them onto a plane whose normal is the axis vector
if axis is not None:
plane = Plane( axis.vector, Point3( 0 ) )
startVec = Vec3( plane.project( Point3( startVec ) ) )
endVec = Vec3( plane.project( Point3( endVec ) ) )
# Get the rotation axis
rotAxis = endVec.cross( startVec ) * -1
# Return if the rotation vector is not valid, ie it does not have any
# length
if not rotAxis.length():
return
# Normalize all vectors
startVec.normalize()
endVec.normalize()
rotAxis.normalize()
# Get the amount of degrees to rotate
degs = startVec.angleDeg( endVec )
# Transform the gizmo if in local rotation mode
newRotMat = Mat4().rotateMat( degs, rotAxis )
if self.local:
self.setMat( newRotMat * self.getMat() )
# Transform all attached node paths
for i, np in enumerate( self.attachedNps ):
# Split the transform into scale, rotation and translation
# matrices
transMat, rotMat, scaleMat = commonUtils.GetTrsMatrices( np.getTransform() )
# Perform transforms in local or world space
if self.local:
np.setMat( scaleMat * newRotMat * rotMat * transMat )
else:
self.initNpXforms[i].getQuat().extractToMatrix( rotMat )
np.setMat( scaleMat * rotMat * newRotMat * transMat )
class CameraHandler(DirectObject.DirectObject):
def __init__(self, showbase):
self.showbase = showbase
self.showbase.disableMouse()
# This disables the default mouse based camera control used by panda. This default control is awkward, and won't be used.
self.showbase.camera.setPos(0, -150, 200)
self.showbase.camera.lookAt(0, 0, 0)
# Gives the camera an initial position and rotation.
self.mx, self.my = 0, 0
# Sets up variables for storing the mouse coordinates
self.orbiting = False
# A boolean variable for specifying whether the camera is in orbiting mode. Orbiting mode refers to when the camera is being moved
# because the user is holding down the right mouse button.
self.target = Vec3()
# sets up a vector variable for the camera's target. The target will be the coordinates that the camera is currently focusing on.
self.camDist = 150
# A variable that will determine how far the camera is from it's target focus
self.panRateDivisor = 10
# This variable is used as a divisor when calculating how far to move the camera when panning. Higher numbers will yield slower panning
# and lower numbers will yield faster panning. This must not be set to 0.
self.panZoneSize = .1
# This variable controls how close the mouse cursor needs to be to the edge of the screen to start panning the camera. It must be less than 1,
# and I recommend keeping it less than .2
self.panLimitsX = Vec2(-1000, 1000)
self.panLimitsY = Vec2(-1000, 1000)
# These two vairables will serve as limits for how far the camera can pan, so you don't scroll away from the map.
self.maxZoomOut = 500
self.maxZoomIn = 25
#These two variables set the max distance a person can zoom in or out
self.orbitRate = 75
# This is the rate of speed that the camera will rotate when middle mouse is pressed and mouse moved
# recommended rate 50-100
self.setTarget(0, 0, 0)
# calls the setTarget function to set the current target position to the origin.
self.turnCameraAroundPoint(0, 0)
# calls the turnCameraAroundPoint function with a turn amount of 0 to set the camera position based on the target and camera distance
self.accept("mouse2", self.startOrbit)
# sets up the camrea handler to accept a right mouse click and start the "drag" mode.
self.accept("mouse2-up", self.stopOrbit)
# sets up the camrea handler to understand when the right mouse button has been released, and ends the "drag" mode when
# the release is detected.
self.storeX = 0
self.storeY = 0
# for storing of the x and y for the orbit
# The next pair of lines use lambda, which creates an on-the-spot one-shot function.
self.accept("wheel_up", self.zoomIn)
# sets up the camera handler to detet when the mouse wheel is rolled upwards and uses a lambda function to call the
# adjustCamDist function with the argument 0.9
self.accept("wheel_down", self.zoomOut)
# sets up the camera handler to detet when the mouse wheel is rolled upwards and uses a lambda function to call the
# adjustCamDist function with the argument 1.1
# Keys array (down if 1, up if 0)
self.keys = { "cam-left": 0, "cam-right": 0, "cam-up": 0, "cam-down": 0 }
# Using Arrow Keys
self.accept("arrow_left", self.setValue, [self.keys, "cam-left", 1])
self.accept("arrow_right", self.setValue, [self.keys, "cam-right", 1])
self.accept("arrow_up", self.setValue, [self.keys, "cam-up", 1])
self.accept("arrow_down", self.setValue, [self.keys, "cam-down", 1])
self.accept("arrow_left-up", self.setValue, [self.keys, "cam-left", 0])
self.accept("arrow_right-up", self.setValue, [self.keys, "cam-right", 0])
self.accept("arrow_up-up", self.setValue, [self.keys, "cam-up", 0])
self.accept("arrow_down-up", self.setValue, [self.keys, "cam-down", 0])
self.keyPanRate = 1.5
# pan rate for when user presses the arrow keys
# set up plane for checking collision with for mouse-3d world
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
def destroy(self):
self.ignoreAll()
def setValue(self, array, key, value):
array[key] = value
def clamp(self, val, minVal, maxVal):
val = min(max(val, minVal), maxVal)
return val
def zoomOut(self):
if self.camDist <= self.maxZoomOut:
self.adjustCamDist(1.1)
return True
def zoomIn(self):
if self.camDist >= self.maxZoomIn:
self.adjustCamDist(0.9)
return True
def turnCameraAroundPoint(self, deltaX, deltaY):
# This function performs two important tasks. First, it is used for the camera orbital movement that occurs when the
# right mouse button is held down. It is also called with 0s for the rotation inputs to reposition the camera during the
# panning and zooming movements.
# The delta inputs represent the change in rotation of the camera, which is also used to determine how far the camera
# actually moves along the orbit.
newCamHpr = Vec3()
newCamPos = Vec3()
# Creates temporary containers for the new rotation and position values of the camera.
camHpr = self.showbase.camera.getHpr()
# Creates a container for the current HPR of the camera and stores those values.
newCamHpr.setX(camHpr.getX() + deltaX)
newCamHpr.setY(self.clamp(camHpr.getY() - deltaY, -85, -10))
newCamHpr.setZ(camHpr.getZ())
# Adjusts the newCamHpr values according to the inputs given to the function. The Y value is clamped to prevent
# the camera from orbiting beneath the ground plane and to prevent it from reaching the apex of the orbit, which
# can cause a disturbing fast-rotation glitch.
self.showbase.camera.setHpr(newCamHpr)
# Sets the camera's rotation to the new values.
angleradiansX = newCamHpr.getX() * (math.pi / 180.0)
angleradiansY = newCamHpr.getY() * (math.pi / 180.0)
# Generates values to be used in the math that will calculate the new position of the camera.
newCamPos.setX(self.camDist * math.sin(angleradiansX) * math.cos(angleradiansY) + self.target.getX())
newCamPos.setY(-self.camDist * math.cos(angleradiansX) * math.cos(angleradiansY) + self.target.getY())
newCamPos.setZ(-self.camDist * math.sin(angleradiansY) + self.target.getZ())
self.showbase.camera.setPos(newCamPos.getX(), newCamPos.getY(), newCamPos.getZ())
# Performs the actual math to calculate the camera's new position and sets the camera to that position.
#Unfortunately, this math is over my head, so I can't fully explain it.
self.showbase.camera.lookAt(self.target.getX(), self.target.getY(), self.target.getZ())
# Points the camera at the target location.
def getTarget(self):
return self.target
# returns the cur
def setTarget(self, x, y, z):
#This function is used to give the camera a new target position.
x = self.clamp(x, self.panLimitsX.getX(), self.panLimitsX.getY())
self.target.setX(x)
y = self.clamp(y, self.panLimitsY.getX(), self.panLimitsY.getY())
self.target.setY(y)
self.target.setZ(z)
# Stores the new target position values in the target variable. The x and y values are clamped to the pan limits.
def setPanLimits(self, xMin, xMax, yMin, yMax):
# This function is used to set the limitations of the panning movement.
self.panLimitsX = (xMin, xMax)
self.panLimitsY = (yMin, yMax)
# Sets the inputs into the limit variables.
def startOrbit(self):
# This function puts the camera into orbiting mode.
# Get windows properties
props = WindowProperties()
# Set Hide Cursor Property
#props.setCursorHidden(True)
# Set properties
self.showbase.win.requestProperties(props)
# hide cursor
if self.showbase.mouseWatcherNode.hasMouse():
# We're going to use the mouse, so we have to make sure it's in the game window. If it's not and we try to use it, we'll get
# a crash error.
mpos = self.showbase.mouseWatcherNode.getMouse()
self.storeX = mpos.getX()
self.storeY = mpos.getY()
# take current cursor values
self.showbase.win.movePointer(0, self.showbase.win.getXSize() / 2, self.showbase.win.getYSize() / 2)
# set to center
self.mx = 0
self.my = 0
self.orbiting = True
# Sets the orbiting variable to true to designate orbiting mode as on.
def stopOrbit(self):
# This function takes the camera out of orbiting mode.
self.orbiting = False
# Sets the orbiting variable to false to designate orbiting mode as off.
self.showbase.win.movePointer(0, int((self.storeX + 1.0) / 2 * self.showbase.win.getXSize()), int(self.showbase.win.getYSize() - ((self.storeY + 1.0) / 2 * self.showbase.win.getYSize())))
# set to taken cursor values from startOrbit
if self.showbase.mouseWatcherNode.hasMouse():
# We're going to use the mouse, so we have to make sure it's in the game window. If it's not and we try to use it, we'll get
# a crash error.
mpos = self.showbase.mouseWatcherNode.getMouse()
self.mx = mpos.getX()
self.my = mpos.getY()
# Get windows properties
props = WindowProperties()
# Set Hide Cursor Property
props.setCursorHidden(False)
# Set properties
self.showbase.win.requestProperties(props)
# reshow cursor
def adjustCamDist(self, distFactor):
# This function increases or decreases the distance between the camera and the target position to simulate zooming in and out.
# The distFactor input controls the amount of camera movement.
# For example, inputing 0.9 will set the camera to 90% of it's previous distance.
self.camDist = self.camDist * distFactor
# Sets the new distance into self.camDist.
self.turnCameraAroundPoint(0, 0)
# Calls turnCameraAroundPoint with 0s for the rotation to reset the camera to the new position.
def camMoveTask(self, dt):
# This task is the camera handler's work house. It's set to be called every frame and will control both orbiting and panning the camera.
if self.showbase.mouseWatcherNode.hasMouse():
# We're going to use the mouse, so we have to make sure it's in the game window. If it's not and we try to use it, we'll get
# a crash error.
mpos = self.showbase.mouseWatcherNode.getMouse()
# Gets the mouse position
if self.orbiting:
# Checks to see if the camera is in orbiting mode. Orbiting mode overrides panning, because it would be problematic if, while
# orbiting the camera the mouse came close to the screen edge and started panning the camera at the same time.
self.turnCameraAroundPoint((self.mx - mpos.getX()) * self.orbitRate * dt, (self.my - mpos.getY()) * self.orbitRate * dt)
else:
# If the camera isn't in orbiting mode, we check to see if the mouse is close enough to the edge of the screen to start panning
moveY = False
moveX = False
# these two booleans are used to denote if the camera needs to pan. X and Y refer to the mouse position that causes the
# panning. X is the left or right edge of the screen, Y is the top or bottom.
if self.my > (1 - self.panZoneSize):
angleradiansX1 = self.showbase.camera.getH() * (math.pi / 180.0)
panRate1 = (1 - self.my - self.panZoneSize) * (self.camDist / self.panRateDivisor)
moveY = True
if self.my < (-1 + self.panZoneSize):
angleradiansX1 = self.showbase.camera.getH() * (math.pi / 180.0) + math.pi
panRate1 = (1 + self.my - self.panZoneSize) * (self.camDist / self.panRateDivisor)
moveY = True
if self.mx > (1 - self.panZoneSize):
angleradiansX2 = self.showbase.camera.getH() * (math.pi / 180.0) + math.pi * 0.5
panRate2 = (1 - self.mx - self.panZoneSize) * (self.camDist / self.panRateDivisor)
moveX = True
if self.mx < (-1 + self.panZoneSize):
angleradiansX2 = self.showbase.camera.getH() * (math.pi / 180.0) - math.pi * 0.5
panRate2 = (1 + self.mx - self.panZoneSize) * (self.camDist / self.panRateDivisor)
moveX = True
# These four blocks check to see if the mouse cursor is close enough to the edge of the screen to start panning and then
# perform part of the math necessary to find the new camera position. Once again, the math is a bit above my head, so
# I can't properly explain it. These blocks also set the move booleans to true so that the next lines will move the camera.
# If up or down keys are pressed
if self.keys["cam-up"] ^ self.keys["cam-down"]:
moveY = True
panRate1 = self.keyPanRate
# Update warlock position on z plane
if self.keys["cam-up"]:
angleradiansX1 = self.showbase.camera.getH() * (math.pi / 180.0) + math.pi
if self.keys["cam-down"]:
angleradiansX1 = self.showbase.camera.getH() * (math.pi / 180.0)
# If left or right keys are pressed
if self.keys["cam-left"] ^ self.keys["cam-right"]:
moveX = True
panRate2 = self.keyPanRate
# Update warlock position on x plane
if self.keys["cam-left"]:
angleradiansX2 = self.showbase.camera.getH() * (math.pi / 180.0) + math.pi * 0.5
if self.keys["cam-right"]:
angleradiansX2 = self.showbase.camera.getH() * (math.pi / 180.0) - math.pi * 0.5
if moveY:
tempX = self.target.getX() + math.sin(angleradiansX1) * panRate1 * dt * 50
tempX = self.clamp(tempX, self.panLimitsX.getX(), self.panLimitsX.getY())
self.target.setX(tempX)
tempY = self.target.getY() - math.cos(angleradiansX1) * panRate1 * dt * 50
tempY = self.clamp(tempY, self.panLimitsY.getX(), self.panLimitsY.getY())
self.target.setY(tempY)
self.turnCameraAroundPoint(0, 0)
if moveX:
tempX = self.target.getX()-math.sin(angleradiansX2) * panRate2 * dt * 50
tempX = self.clamp(tempX, self.panLimitsX.getX(), self.panLimitsX.getY())
self.target.setX(tempX)
tempY = self.target.getY() + math.cos(angleradiansX2) * panRate2 * dt * 50
tempY = self.clamp(tempY, self.panLimitsY.getX(), self.panLimitsY.getY())
self.target.setY(tempY)
self.turnCameraAroundPoint(0, 0)
# These two blocks finalize the math necessary to find the new camera position and apply the transformation to the
# camera's TARGET. Then turnCameraAroundPoint is called with 0s for rotation, and it resets the camera position based
# on the position of the target. The x and y values are clamped to the pan limits before they are applied.
#print(self.target)
self.mx = mpos.getX()
self.my = mpos.getY()
# The old mouse positions are updated to the current mouse position as the final step.
# Finds 3d world point on the z = 0 plane for destination/target
def getMouse3D(self):
# make sure process has the mouse to not cause error
if self.showbase.mouseWatcherNode.hasMouse():
# get screen coordinates of mouse
mpos = self.showbase.mouseWatcherNode.getMouse()
pos3d = Point3()
nearPoint = Point3()
farPoint = Point3()
# find vector of cameras facing from mouse screen coordinates and get near and far points on frustrum
self.showbase.camLens.extrude(mpos, nearPoint, farPoint)
# check for intersection with z = 0 plane
if self.plane.intersectsLine(pos3d,
self.showbase.render.getRelativePoint(self.showbase.camera, nearPoint),
self.showbase.render.getRelativePoint(self.showbase.camera, farPoint)):
# return this position if exists
return pos3d
# or return (-1, -1, -1)
return Vec3(-1, -1, -1)
def __init__(self, showbase):
self.showbase = showbase
self.showbase.disableMouse()
# This disables the default mouse based camera control used by panda. This default control is awkward, and won't be used.
self.showbase.camera.setPos(0, -150, 200)
self.showbase.camera.lookAt(0, 0, 0)
# Gives the camera an initial position and rotation.
self.mx, self.my = 0, 0
# Sets up variables for storing the mouse coordinates
self.orbiting = False
# A boolean variable for specifying whether the camera is in orbiting mode. Orbiting mode refers to when the camera is being moved
# because the user is holding down the right mouse button.
self.target = Vec3()
# sets up a vector variable for the camera's target. The target will be the coordinates that the camera is currently focusing on.
self.camDist = 150
# A variable that will determine how far the camera is from it's target focus
self.panRateDivisor = 10
# This variable is used as a divisor when calculating how far to move the camera when panning. Higher numbers will yield slower panning
# and lower numbers will yield faster panning. This must not be set to 0.
self.panZoneSize = .1
# This variable controls how close the mouse cursor needs to be to the edge of the screen to start panning the camera. It must be less than 1,
# and I recommend keeping it less than .2
self.panLimitsX = Vec2(-1000, 1000)
self.panLimitsY = Vec2(-1000, 1000)
# These two vairables will serve as limits for how far the camera can pan, so you don't scroll away from the map.
self.maxZoomOut = 500
self.maxZoomIn = 25
#These two variables set the max distance a person can zoom in or out
self.orbitRate = 75
# This is the rate of speed that the camera will rotate when middle mouse is pressed and mouse moved
# recommended rate 50-100
self.setTarget(0, 0, 0)
# calls the setTarget function to set the current target position to the origin.
self.turnCameraAroundPoint(0, 0)
# calls the turnCameraAroundPoint function with a turn amount of 0 to set the camera position based on the target and camera distance
self.accept("mouse2", self.startOrbit)
# sets up the camrea handler to accept a right mouse click and start the "drag" mode.
self.accept("mouse2-up", self.stopOrbit)
# sets up the camrea handler to understand when the right mouse button has been released, and ends the "drag" mode when
# the release is detected.
self.storeX = 0
self.storeY = 0
# for storing of the x and y for the orbit
# The next pair of lines use lambda, which creates an on-the-spot one-shot function.
self.accept("wheel_up", self.zoomIn)
# sets up the camera handler to detet when the mouse wheel is rolled upwards and uses a lambda function to call the
# adjustCamDist function with the argument 0.9
self.accept("wheel_down", self.zoomOut)
# sets up the camera handler to detet when the mouse wheel is rolled upwards and uses a lambda function to call the
# adjustCamDist function with the argument 1.1
# Keys array (down if 1, up if 0)
self.keys = { "cam-left": 0, "cam-right": 0, "cam-up": 0, "cam-down": 0 }
# Using Arrow Keys
self.accept("arrow_left", self.setValue, [self.keys, "cam-left", 1])
self.accept("arrow_right", self.setValue, [self.keys, "cam-right", 1])
self.accept("arrow_up", self.setValue, [self.keys, "cam-up", 1])
self.accept("arrow_down", self.setValue, [self.keys, "cam-down", 1])
self.accept("arrow_left-up", self.setValue, [self.keys, "cam-left", 0])
self.accept("arrow_right-up", self.setValue, [self.keys, "cam-right", 0])
self.accept("arrow_up-up", self.setValue, [self.keys, "cam-up", 0])
self.accept("arrow_down-up", self.setValue, [self.keys, "cam-down", 0])
self.keyPanRate = 1.5
# pan rate for when user presses the arrow keys
# set up plane for checking collision with for mouse-3d world
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
class Game(DirectObject):
def __init__(self):
self.count_tree=0
self.playVideo("intro.mp4")
base.disableMouse()
self.environ = loader.loadModel("models/scene.egg.pz")
self.objects=loader.loadModel("models/objects.egg")
self.plants=loader.loadModel("models/plants.egg")
self.plants.reparentTo(render)
self.objects.reparentTo(render)
self.environ.reparentTo(render)
self.makeSkyBox()
self.makingActor()
self.makeRacers()
self.controlSkater()
self.makeLights()
self.makeWater()
#self.controlRacer()
self.addCollisions()
self.addDuck()
#self.makeRacingai()
self.tree_array={}
self.stone_array={}
self.count_stone=0
self.isSitted=False
self.bench={}
self.count_bench=0;
self.AddBench(-40,-30)
self.AddBench(-40,-40,180)
self.AddBench(40,-30)
self.AddBench(40,-40,180)
self.AddBench(40,30)
self.AddBench(40,40,180)
self.AddBench(-40,30)
self.AddBench(-40,40,180)
for i in range(-70,70,6):
#for j in range (-80,-70,3):
self.AddTree(i,-65)
for i in range(-70,70,6):
#for j in range (-80,-70,3):
self.AddTree(i+5,-70)
for i in range(-70,70,6):
#for j in range (60,70,3):
self.AddTree(i,65)
for i in range(-70,70,6):
#for j in range (60,70,3):
self.AddTree(i+5,70)
for j in range(-70,70,6):
#for i in range (60,70,3):
self.AddTree(65,j)
for j in range(-70,70,6):
#for i in range (60,70,3):
self.AddTree(70,j+5)
for j in range(-70,70,6):
#for i in range (-80,-70,3):
self.AddTree(-70,j)
for j in range(-70,70,6):
#for i in range (-80,-70,3):
self.AddTree(-65,j+5)
self.initailState()
render.setShaderAuto()
def playVideo(self,src):
tex = MovieTexture("name")
assert tex.read(src), "Failed to load video!"
cm = CardMaker("My Fullscreen Card");
cm.setFrameFullscreenQuad()
cm.setUvRange(tex)
card = NodePath(cm.generate())
card.reparentTo(render2d)
card.setTexture(tex)
card.setTexScale(TextureStage.getDefault(), tex.getTexScale())
sound=loader.loadSfx(src)
tex.synchronizeTo(sound)
tex.setLoop(False)
sound.play()
def myTask(task):
i=14
if(src=='talk.mp4'):
i=7
if (int(tex.getTime()) >=i):
#print "Stoping"
card.remove()
return task.done
# if myMovieTexture.getTime() == myMovieLength:
# print "movie puri"
return task.cont
taskMgr.add(myTask, "Task")
def addDuck(self):
self.duck={}
self.count_duck=0
self.interval1={};self.interval11={}
self.interval2={};self.interval22={}
for i in range(0,3,1):
self.duck[self.count_duck]=loader.loadModel("models/duck.egg")
self.duck[self.count_duck].setScale(random.uniform(5,7))
self.duck[self.count_duck].setZ(0.65)
self.duck[self.count_duck].setX(i*3-3)
self.duck[self.count_duck].reparentTo(render)
self.interval1[self.count_duck]= self.duck[self.count_duck].posInterval(10,Point3(i*3-3, random.uniform(0,12),0.65),startPos=Point3(i*3-3,-1*random.uniform(0,12),0.65))
self.interval11[self.count_duck]=self.duck[self.count_duck].hprInterval(0.1, Vec3(0, 0, 0))
self.interval2[self.count_duck]= self.duck[self.count_duck].posInterval(10,Point3(i*3-3,-1*random.uniform(0,12),0.65),startPos=Point3(i*3-3,random.uniform(0,12),0.65))
self.interval22[self.count_duck]=self.duck[self.count_duck].hprInterval(0.1, Vec3(180, 0, 0))
if(self.count_duck==0):
self.mySequence=Sequence(self.interval1[self.count_duck], name="duck")
self.mySequence.append(self.interval11[self.count_duck])
self.mySequence.append(self.interval2[self.count_duck])
self.mySequence.append(self.interval22[self.count_duck])
self.count_duck=self.count_duck+1
self.mySequence.loop()
def makeSkyBox(self):
#colour = (0.5,0.8,0.5)
self.skybox=loader.loadModel("models/skybox.egg")
self.skybox.reparentTo(render)
self.skybox.setLightOff(1)
self.skybox.setZ(-10)
self.skybox.setScale(140,140,70)
def makingActor(self):
self.skater = Actor("models/scater.egg",{"fall":"models/scaterfall.egg","skate":"models/scater.egg",
"walk":"models/scaterwalk.egg","run":"models/scaterrun.egg","sit":"models/scatersit.egg"})
self.skater.setPos(-20.67,-41.99,0)
self.skater.setScale(0.075,0.075,0.075)
#self.skater.setH(180)
self.skater.reparentTo(render)
def makeWater(self):
self.water = loader.loadModel("models/water.egg")
self.water.setPos(0,0,1)
self.water.setShader(loader.loadShader('shaders/water.sha'))
self.water.setShaderInput('wateranim', Vec4(0.03, -0.015, 64.0, 0))
self.water.setShaderInput('waterdistort', Vec4(0.4, 4.0, 0.25, 0.45))
self.water.setShaderInput('time', 0)
buffer = base.win.makeTextureBuffer('waterBuffer', 512, 512)
#buffer.setClearColor(Vec4(0.3, 0.3, 1, 1))
cfa = CullFaceAttrib.makeReverse()
rs = RenderState.make(cfa)
self.watercamNP = base.makeCamera(buffer)
self.watercamNP.reparentTo(render)
cam = self.watercamNP.node()
cam.getLens().setFov(base.camLens.getFov())
cam.getLens().setNear(1)
cam.getLens().setFar(5000)
cam.setInitialState(rs)
self.waterPlane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
planeNode = PlaneNode('waterPlane')
planeNode.setPlane(self.waterPlane)
#cam.lookAt(0,0,-1)
cam.setTagStateKey('Clipped')
tex0 = buffer.getTexture()
tex0.setWrapU(Texture.WMClamp)
tex0.setWrapV(Texture.WMClamp)
ts0 = TextureStage('reflection')
self.water.setTexture(ts0, tex0)
tex1 = loader.loadTexture('texture/water.png')
ts1 = TextureStage('distortion')
self.water.setTexture(ts1, tex1)
self.keyMap={};
self.keyMap["sit"]=0
self.keyMap["call"]=0
self.keyMap["left"]=0
self.keyMap["forward"]=0
self.keyMap["right"]=0
taskMgr.add(self.waterUpdate, "waterTask")
taskMgr.add(self.cameraControl,"cameraControl")
self.water.reparentTo(render)
def controlSkater(self):
self.isMoving = False
self.floater = NodePath(PandaNode("floater"))
self.floater.reparentTo(render)
self.accept("arrow_up", self.setKey, ["forward",1])
self.accept("arrow_up-repeat",self.setKey, ["forward",1])
self.accept("arrow_up-up",self.setKey, ["forward",0])
self.accept("arrow_down", self.setKey, ["forward",-1])
self.accept("arrow_down-repeat",self.setKey, ["forward",-1])
self.accept("arrow_down-up",self.setKey, ["forward",0])
self.accept("e",self.setKey,["sit",1])
self.accept("q",self.setKey,["sit",0])
self.accept("c",self.setKey,["call",1])
#self.accept("c-up",self.setKey,["call",0])
self.accept("arrow_left", self.setKey, ["left",1])
self.accept("arrow_left-repeat",self.setKey, ["left",1])
self.accept("arrow_left-up",self.setKey,["left",0])
self.accept("arrow_right", self.setKey, ["right",1])
self.accept("arrow_right-repeat",self.setKey, ["right",1])
self.accept("arrow_right-up",self.setKey,["right",0])
self.accept("escape", sys.exit)
def makeRacers(self):
#self.floater=0
self.racers={}
self.racersCount=0
self.racers[self.racersCount] = Actor("models/scater.egg",{"skate":"models/scater.egg",
"walk":"models/scaterwalk.egg","sit":"models/scatersit.egg","standup":"models/scaterstandup.egg"})
self.racers[self.racersCount].setTexture(loader.loadTexture("texture/racer.tga"),1)
self.racers[self.racersCount].setPos(-30,30,0)
self.racers[self.racersCount].setScale(0.075,0.075,0.075)
#self.racers[self.racersCount].setH(90)
self.racers[self.racersCount].reparentTo(render)
#self.racerMoveTo(self.racersCount,-60,0)
#self.interval={}
#self.controlRacer(self.racersCount)
#self.racersCount=self.racersCount+1
def racerMoveTo(self,no,x,y,direcation,anim='skate'):
if(x-self.racers[no].getX()!=0):
self.angle=atan(float(y-self.racers[no].getY())/float(x-self.racers[no].getX()))+90
if(x<self.racers[no].getX()):
self.angle=self.angle+90
else:
if(y>self.racers[no].getY()):
self.angle=180
if(y<self.racers[no].getY()):
self.angle=0
self.racers[no].setH(self.angle*180/pi)
self.interval= self.racers[no].posInterval(direcation,Point3(x,y,0),startPos=self.racers[no].getPos())
#self.pace = Sequence(interval,name="skatePose")
self.interval.start()
#s while (interval.isPlaying())
self.racers[no].loop(anim)
#while (self.racers[no].getY()!=y and self.racers[no].getX()!=x):
# self.racers[no].setY(self.racers[no], -100 * globalClock.getDt())
def controlRacer(self,no):
self.pointNo=1;
taskMgr.add(self.controlRacerTask, "race")
self.racers[self.racersCount].setPos(-12.3668,42.92,0)
self.racerMoveTo(no,-12.3668,42.92,3)
#y={42.92,10.61,-4.685,-29.29,-41.99,-45,-40.87,-33.22,-17.81,-1.14,21.30,36.82,45.5}
#for i in range(0,13,1):
#self.racerMoveTo(self.racersCount,x[i],y[0],7)
#time.sleep(7)
def controlRacerTask(self,task):
if(self.interval.isPlaying()==False and self.exploringMode==False):
self.racerMoveTo(self.racersCount,self.x[self.pointNo],self.y[self.pointNo],2)
self.pointNo=(self.pointNo+1)%13
#print self.pointNo
#time.sleep(7)
return task.cont
def addCollisions(self):
self.cTrav = CollisionTraverser()
self.skaterGroundRay = CollisionRay()
self.skaterGroundRay.setOrigin(0,0,1000)
self.skaterGroundRay.setDirection(0,0,-1)
self.skaterGroundCol = CollisionNode('skater')
self.skaterGroundCol.addSolid(self.skaterGroundRay)
self.skaterGroundCol.addSolid(CollisionTube(0,0,0,0,0,50,10))
#self.skaterGroundCol.setFromCollideMask(BitMask32.bit(0))
#self.skaterGroundCol.setIntoCollideMask(BitMask32.allOff())
self.skaterGroundColNp = self.skater.attachNewNode(self.skaterGroundCol)
self.skaterGroundHandler = CollisionHandlerQueue()
self.cTrav.addCollider(self.skaterGroundColNp, self.skaterGroundHandler)
#self.skaterGroundColNp.show()
#self.cTrav.showCollisions(render)
self.angle=180/pi;
self.isFall=False
def setKey(self,key,value):
self.keyMap[key] = value
def Move(self,task):
if(self.isSitted ):
if(self.keyMap['sit']==0):
self.isSitted=False
self.skater.pose("walk",12)
self.isMoving = False
return task.cont
startpos = self.skater.getPos()
if (self.keyMap["left"]!=0):
self.skater.setH(self.skater.getH() + 100 * globalClock.getDt())
if (self.keyMap["right"]!=0):
self.skater.setH(self.skater.getH() - 100 * globalClock.getDt())
#if (self.keyMap["right"]!=0):
# self.ralph.setH(self.ralph.getH() - 300 * globalClock.getDt())
dx=100
if(self.raceingStart==True):
dx=150
if (self.keyMap["forward"]!=0):
if(self.exploringMode==False and self.raceingStart==True and self.startingTime>=3):
self.skater.setY(self.skater, -dx * globalClock.getDt())
else:
if(self.exploringMode==True):
self.skater.setY(self.skater, -dx * globalClock.getDt())
if (self.keyMap["forward"]!=0) :
if self.isMoving == False:
if self.exploringMode==True:
self.skater.loop("walk")
else:
self.skater.loop("skate")
self.isMoving = True
else:
#if self.isSitted:
# @self.skater.loop("sit")
if self.isMoving :
#if(self.skater.getCurrentAnim()=='skate'):
self.skater.stop()
self.skater.pose("walk",12)
self.isMoving = False
"""
if(self.isFall==True):
if(self.skater.getCurrentAnim()=='fall'):
if(self.skater.getCurrentFrame('fall')>=20):
self.isFall=False
self.skater.pose("skate",5)"""
for i in range(0,self.count_bench,1):
x=self.bench[i].getX()
y=self.bench[i].getY()
X=self.skater.getX();Y=self.skater.getY();
dist=sqrt((x-X)*(x-X)+(y-Y)*(y-Y))
if(dist<=5):
if(self.isSitted==False and self.keyMap['sit']==1):
self.skater.stop()
self.skater.setPos(self.bench[i].getPos())
#self.skater.setY(self.skater.getY()+3)
self.skater.setH(self.bench[i].getH()+270)
self.skater.play('sit')
self.isSitted=True
if(self.isMoving==True):
"""if(self.isFall==True):
if(self.skater.getCurrentFrame('fall')==25):
self.isFall=False"""
self.cTrav.traverse(render)
entries = []
for i in range(self.skaterGroundHandler.getNumEntries()):
entry = self.skaterGroundHandler.getEntry(i)
entries.append(entry)
entries.sort(lambda x,y: cmp(y.getSurfacePoint(render).getZ(),
x.getSurfacePoint(render).getZ()))
print entries[0].getIntoNode().getName()
if (len(entries)>0 and entries[0].getIntoNode().getName() == "character"):
self.skater.setZ(entries[0].getSurfacePoint(render).getZ())
else:
self.skater.setPos(startpos)
#self.skater.setPos(startpos)
#self.skater.play('fall')
#self.isFall=True
return task.cont
def AddBench(self,x,y,angle=0):
self.bench[self.count_bench]=loader.loadModel("models/bench.egg")
self.bench[self.count_bench].reparentTo(render)
self.bench[self.count_bench].setH(angle)
self.bench[self.count_bench].setPos(x,y,0)
self.bench[self.count_bench].setTexture(loader.loadTexture("texture/wood.jpg"),1)
self.count_bench=self.count_bench+1
#self.bench[self.count_bench].setScale(0.03,0.03,0.03)
def AddTree(self,x,y):
self.tree_array[self.count_tree]=loader.loadModel("models/smalltree.egg")
self.tree_array[self.count_tree].reparentTo(render)
self.tree_array[self.count_tree].setPos(x,y,-2)
self.tree_array[self.count_tree].setScale( random.uniform(0.01,0.02),random.uniform(0.01, 0.02),random.uniform(0.01, 0.02))
self.tree_array[self.count_tree].setTexture(loader.loadTexture("models/smalltree.png"),1)
self.tree_array[self.count_tree].setTransparency(TransparencyAttrib.MDual)
self.tree_array[self.count_tree].setShaderAuto()
self.tree_array[self.count_tree].setColor(VBase4(0.5+random.uniform(0,0.5),1,0.5+random.uniform(0,0.5),1))
self.count_tree=self.count_tree+1
def AddStone(self,x,y):
self.stone_array[self.count_stone]=loader.loadModel("models/stone1.egg")
self.stone_array[self.count_stone].reparentTo(render)
self.stone_array[self.count_stone].setPos(x,y,0)
self.stone_array[self.count_stone].setH(random.uniform(0,360))
self.stone_array[self.count_stone].setTexture(loader.loadTexture("texture/Stone_2_DiffuseMap.jpg"),1)
self.stone_array[self.count_stone].setScale(random.uniform(0.005,0.015))
self.stone_array[self.count_stone].setShaderAuto()
self.count_stone=self.count_stone+1
def cameraControl(self,task):
self.floater.setPos(self.skater.getPos())
self.floater.setZ(self.skater.getZ() + 10.0)
#camera.lookAt(self.floater)
return task.cont
def waterUpdate(self,task):
self.slnp.lookAt(self.skater)
#print self.skater.getX(),self.skater.getY()
base.camera.setPos(self.skater.getPos())
base.camera.setZ(self.skater.getZ() + 10.0)
base.camera.setY(self.skater.getY() - 30*sin((-self.skater.getH()-90)*pi/180))
base.camera.setX(self.skater.getX() + 30*cos((-self.skater.getH()-90)*pi/180))
if base.mouseWatcherNode.hasMouse():
x=base.mouseWatcherNode.getMouseX()
y=base.mouseWatcherNode.getMouseY()
base.camera.lookAt(self.skater.getX() ,self.skater.getY(),self.skater.getZ()+((y+1)/2)*10+0.5)
#base.camera.setH(self.skater.getH())
#base.camera.lookAt(self.skater)
mc = base.camera.getMat()
mf = self.waterPlane.getReflectionMat()
self.mc = base.camera.getMat()
mf = self.waterPlane.getReflectionMat()
self.watercamNP.setMat(mc * mf)
self.water.setShaderInput('time', task.time)
return task.cont
def makeLights(self):
slight = Spotlight('slight')
slight.setColor(VBase4(1, 1, 1, 1))
lens = PerspectiveLens()
slight.setLens(lens)
#slight.setFov(90)
self.slnp = render.attachNewNode(slight)
self.slnp.setPos(0, 0, 70)
self.ambientLight=AmbientLight('AmbientLight')
self.ambientLight.setColor(VBase4(0.3, 0.3, 0.3, 0.3))
#
self.ambientNP = render.attachNewNode(self.ambientLight)
render.setLight(self.ambientNP)
render.setLight(self.slnp)
#render.setLight(self.ambientNP)
def racingInteraction(self,task):
if(self.raceingStart==True):
self.startingTime=task.time
x=self.racers[self.racersCount].getX()
y=self.racers[self.racersCount].getY()
X=self.skater.getX();Y=self.skater.getY();
dist=sqrt((x-X)*(x-X)+(y-Y)*(y-Y))
if(self.exploringMode==False):
if((task.time-self.startedTime)<=3):
self.txt.setText(str(int(task.time-self.startedTime)))
#self.keyMap["forward"]=0
self.isRacing=True
else:
self.txt.setText("")
if(dist<=5):
if(self.keyMap["call"]==1 and self.raceingStart==False):
self.racers[self.racersCount].play('standup')
self.raceingStart=True
else:
if(self.keyMap["call"]==1 and self.raceingStart==True):
if(self.racers[self.racersCount].getAnimControl('standup').isPlaying()==False and self.exploringMode==True):
self.startedTime=task.time
#self.playVideo('talk.mp4')
#mytimer.setY(0)
self.exploringMode=False
self.skater.setH(0)
self.skater.setPos(-15.3668,44,0)
self.controlRacer(self.racersCount)
#print self.skater.getX(),self.skater.getY()
if(
self.exploringMode==False and self.skater.getX()>=-5 and self.skater.getX()<=5 and self.skater.getY()>=42 and self.skater.getY()<=55):
self.exploringMode=True
self.raceingStart=False
self.txt.setText("Finish \n You Win")
self.finishTime=task.time;
self.interval.finish()
self.racers[self.racersCount].setPos(-40,-30,0)
self.keyMap["call"]=0
self.skater.setPos(-15.3668,44,0)
self.racers[self.racersCount].setH(self.bench[0].getH()+270)
self.racers[self.racersCount].pose('standup',0)
if(self.exploringMode==False and self.racers[self.racersCount].getX()>=-5 and self.racers[self.racersCount].getX()<=5
and self.racers[self.racersCount].getY()>=42 and self.racers[self.racersCount].getY()<=55):
self.exploringMode=True
self.raceingStart=False
self.txt.setText(" Finish \n You Lose")
self.finishTime=task.time;
self.interval.finish()
self.racers[self.racersCount].setPos(-40,-30,0)
self.keyMap["call"]=0
self.racers[self.racersCount].setH(self.bench[0].getH()+270)
self.racers[self.racersCount].pose('standup',0)
if(task.time-self.finishTime>=1 and self.finishTime!=0):
self.txt.setText("")
return task.cont
def initailState(self):
OnscreenText(text="[1] Press E for sit ", style=1, fg=(1,1,1,1),pos=(-1.75, 0.9), align=TextNode.ALeft, scale = 0.06)
OnscreenText(text="[2] Press Q for stand", style=1, fg=(1,1,1,1),pos=(-1.75, 0.8), align=TextNode.ALeft, scale = 0.06)
OnscreenText(text="[3] Press C for Challenge", style=1, fg=(1,1,1,1),pos=(-1.75, 0.7), align=TextNode.ALeft, scale = 0.06)
self.finishX=0
self.finishTime=0
map_data = Image.open("texture/map.png")
pix_data = map_data.load()
for i in range(0,80,3):
for j in range (0,80,3):
#print pix_data[i,j]
if pix_data[i,j]==0:
self.AddStone(i-40,j-40)
else:
if pix_data[i,j]==3:
self.AddTree(i-40,j-40)
self.txt=OnscreenText(text="", style=1, fg=(1,1,1,1),pos=(0, 0), align=TextNode.ALeft, scale = 0.06)
self.raceingStart=False
self.exploringMode=True
self.racers[self.racersCount].setPos(-40,-30,0)
self.racers[self.racersCount].setH(self.bench[0].getH()+270)
self.racers[self.racersCount].pose('standup',0)
self.x={};
self.x[0]=-12.3668;self.x[1]=-19.79;self.x[2]=-21.90;self.x[3]=-26.53;self.x[4]=-20.67;
self.x[5]=-3;self.x[6]=13.93;self.x[7]=22.65;self.x[8]=24.74;self.x[9]=24.38;
self.x[10]=18.65;self.x[11]=12.10;self.x[12]=-1.92;
#x={-12.3668,-19.79,-21.90,-26.53,-20.67,-3,13.93,22.65,24.74,24.38,18.65,12.10,-1.92}
self.y={}
self.y[0]=42.92;self.y[1]=10.61;self.y[2]=-4.685;self.y[3]=-29.29;self.y[4]=-41.99;
self.y[5]=-45;self.y[6]=-40.87;self.y[7]=-33.22;self.y[8]=-17.81;self.y[9]=-1.14;
self.y[10]=21.30;self.y[11]=36.82;self.y[12]=45.5
taskMgr.add(self.Move,"moveTask")
taskMgr.add(self.racingInteraction,"moveTask")
class MoveCursor(object):
_EDGES = 40
_zPos = 0
_movingUp = False
_movingDown = False
_color = Vec4(0.3, 0.3, 0.8, 1)
_currentPos = Vec3(0, 0, 0)
def __init__(self, parent, entity, foot=1):
self.entity = entity
self._moveRadCircleNP = NodePath("Movement Radius Node")
self._moveLine = LineSegs()
self._moveLineNP = NodePath("Movement Direction Line Node")
self._moveZLine = LineSegs()
self._moveZLineNP = NodePath("Movement Z Line Node")
self._moveZFootNP = NodePath("Movement Z Foot Node")
self._moveFootCircle = LineSegs()
self._moveFootCircleNP = NodePath("Movement Foot Circle Node")
self._attackRadCircle = LineSegs()
self._attackRadCircleNP= NodePath("Attack Radius Node")
self._np = NodePath("Movement Node")
self.attackables = []
Event.Dispatcher().register(self, 'E_Key_ZUp', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZDown', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZUp-up', self.onZChange)
Event.Dispatcher().register(self, 'E_Key_ZDown-up', self.onZChange)
self.aaLevel= int(GameSettings().getSetting('ANTIALIAS'))
self.parent = parent
self.start = Vec3(0, 0, 0)
self.moveRad = entity.moveRad
self.footRad = foot
self.attackRad = entity.attackRad
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
self.draw()
self._np.reparentTo(self.parent)
if self.aaLevel > 0:
self._np.setAntialias(AntialiasAttrib.MLine, self.aaLevel)
taskMgr.add(self.updateMovePos, 'Movement Indicator Update Task')
def draw(self):
# Setup curr mouse pos in 3d space
posXY = self.getMouseXY()
x = posXY.getX()
y = posXY.getY()
z = 0
# Draw movement radius
moveRadLine = LineSegs()
moveRadLine.setThickness(1)
moveRadLine.setColor(self._color)
moveRadLine.moveTo(self.moveRad, 0, 0)
for i in range(self._EDGES + 1):
newX = (self.moveRad * math.cos((2*math.pi/self._EDGES)*i))
newY = (self.moveRad * math.sin((2*math.pi/self._EDGES)*i))
moveRadLine.drawTo(newX, newY, 0)
moveRadGeom = moveRadLine.create()
self._moveRadCircleNP = NodePath(moveRadGeom)
self._moveRadCircleNP.reparentTo(self._np)
# Draw movement foot circle
self._moveFootCircle.setThickness(1)
self._moveFootCircle.setColor(self._color)
self._moveFootCircle.moveTo(self.footRad, 0, 0)
for i in range(self._EDGES):
newX = (self.footRad * math.cos((2*math.pi/self._EDGES)*i))
newY = (self.footRad * math.sin((2*math.pi/self._EDGES)*i))
self._moveFootCircle.drawTo(newX, newY, 0)
self._moveFootCircle.drawTo(self.footRad, 0, 0)
moveFootCircleGeom = self._moveFootCircle.create()
self._moveFootCircleNP = NodePath(moveFootCircleGeom)
self._moveFootCircleNP.reparentTo(self._np)
# Draw movement direction line
self._moveLine.setThickness(1)
self._moveLine.setColor(self._color)
self._moveLine.moveTo(0, 0, 0)
self._moveLine.drawTo(x, y, z)
moveLine = self._moveLine.create()
self._moveLineNP = NodePath(moveLine)
self._moveLineNP.reparentTo(self._np)
# Draw Z line
self._moveZLine.setThickness(1)
self._moveZLine.setColor(self._color)
self._moveZLine.moveTo(self.start)
self._moveZLine.drawTo(x, y, z)
moveZLine = self._moveZLine.create()
self._moveZLineNP = NodePath(moveZLine)
self._moveZLineNP.reparentTo(self._np)
# Draw Attack Radius
self._attackRadCircle.setThickness(1)
self._attackRadCircle.setColor(0.8, 0.0, 0.0, 1)
self._attackRadCircle.moveTo(self.attackRad, 0, 0)
for i in range(self._EDGES + 1):
newX = (self.attackRad * math.cos((2*math.pi/self._EDGES)*i))
newY = (self.attackRad * math.sin((2*math.pi/self._EDGES)*i))
self._attackRadCircle.drawTo(newX, newY, 0)
attackRadCircleGeom = self._attackRadCircle.create()
self._attackRadCircleNP = NodePath(attackRadCircleGeom)
self._attackRadCircleNP.reparentTo(self._np)
def updateMovePos(self, Task):
# endPos must be transformed in the the coord sys of the model
m_pos = self.getMouseXY()
if m_pos is not None:
# Transform current mouse pos
endPos = self.parent.getRelativePoint(render, m_pos)
# Adjust Z coord if needed
if self._movingUp:
self._zPos += 0.1
elif self._movingDown:
self._zPos -= 0.1
endPos.setZ(self._zPos)
# Check if we're trying to move too far, if not update pos
dist = math.sqrt(endPos.getX()**2 + endPos.getY()**2 + 2*(endPos.getZ()**2))
if dist <= self.moveRad:
self._moveLine.setVertex(1, endPos)
self._moveFootCircleNP.setPos(endPos)
self._moveZLine.setVertex(0, Point3(endPos.getX(), endPos.getY(), 0))
self._moveZLine.setVertex(1, endPos)
self._attackRadCircleNP.setPos(endPos)
self._currentPos = render.getRelativePoint(self._np, endPos)
# Check for attackable ships in range of current pos
attackables = Entity.EntityManager().getEntitiesWithin(self._currentPos, self.attackRad)
# Unhighlight ships no longer in range
for e in self.attackables:
if e not in attackables and isinstance(e, Entity.EntityShip):
e.representation.unsetAttackable()
# Highlight ships in range
for e in attackables:
if isinstance(e, Entity.EntityShip) and e != self.entity and e.owner != self.entity.owner:
e.representation.setAttackable()
self.attackables = attackables
return Task.cont
def onZChange(self, event):
if event.type == 'E_Key_ZUp':
self._movingDown = False
self._movingUp = True
if event.type == 'E_Key_ZDown':
self._movingUp = False
self._movingDown = True
if event.type == 'E_Key_ZUp-up':
self._movingUp = False
self._movingDown = False
if event.type == 'E_Key_ZDown-up':
self._movingUp = False
self._movingDown = False
def getMouseXY(self):
# NOTE - this returns the mouse pos in the ships coord sys
if base.mouseWatcherNode.hasMouse():
mpos = base.mouseWatcherNode.getMouse()
pos3d = Point3()
nearPoint = Point3()
farPoint = Point3()
base.camLens.extrude(mpos, nearPoint, farPoint)
if self.plane.intersectsLine(pos3d,
render.getRelativePoint(camera, nearPoint),
render.getRelativePoint(camera, farPoint)):
#print("Mouse ray intersects ground plane at " + str(pos3d))
return pos3d
def getPosition(self):
return self._currentPos
def removeNode(self):
taskMgr.remove('Movement Indicator Update Task')
for e in self.attackables:
if isinstance(e, Entity.EntityShip):
e.representation.unsetAttackable()
self._moveRadCircleNP.removeNode()
self._moveLineNP.removeNode()
self._moveZLineNP.removeNode()
self._moveZFootNP.removeNode()
self._moveFootCircleNP.removeNode()
self._attackRadCircleNP.removeNode()
self._np.removeNode()
def __del__(self):
# TODO - This isn't calling self.removeNode() correctly
self._np.removeNode()
def createGuiObjects(self):
"""Create the other gui objects in the month, assumes we have proper locators."""
# we create an invisible button so the day can be clicked on
self.dayButton = DirectButton(
parent=self.dayButtonLocator,
image=self.selectedFrame,
relief=None,
command=self.__clickedOnDay,
# next three settings are for debug
pressEffect=1,
rolloverSound=None,
clickSound=None)
self.numberWidget = DirectLabel(
parent=self.numberLocator,
relief=None,
text=str(self.myDate.day),
text_scale=0.04,
text_align=TextNode.ACenter,
text_font=ToontownGlobals.getInterfaceFont(),
text_fg=Vec4(110 / 255.0, 126 / 255.0, 255 / 255.0, 1),
)
self.attachMarker(self.numberLocator)
self.listXorigin = 0
self.listFrameSizeX = self.scrollBottomRightLocator.getX(
) - self.scrollLocator.getX()
self.scrollHeight = self.scrollLocator.getZ(
) - self.scrollBottomRightLocator.getZ()
self.listZorigin = self.scrollBottomRightLocator.getZ()
self.listFrameSizeZ = self.scrollLocator.getZ(
) - self.scrollBottomRightLocator.getZ()
self.arrowButtonXScale = 1
self.arrowButtonZScale = 1
self.itemFrameXorigin = 0
self.itemFrameZorigin = 0
self.buttonXstart = self.itemFrameXorigin + 0.21
self.gui = loader.loadModel("phase_3.5/models/gui/friendslist_gui")
buttonOffSet = -0.01
# these settings put the arrow buttons on the top
incButtonPos = (0.0, 0, 0)
decButtonPos = (0.0, 0, 0)
# these settings put the arrow buttons on the right side
# incButtonPos = (self.buttonXstart,0,self.listZorigin - buttonOffSet)
# decButtonPos = (self.buttonXstart, 0, self.listZorigin + self.listFrameSizeZ + buttonOffSet)
itemFrameMinZ = self.listZorigin
itemFrameMaxZ = self.listZorigin + self.listFrameSizeZ
arrowUp = self.find("**/downScroll_up")
arrowDown = self.find("**/downScroll_down")
arrowHover = self.find("**/downScroll_hover")
self.scrollList = DirectScrolledList(
parent=self.scrollLocator,
relief=None,
pos=(0, 0, 0),
# inc and dec are DirectButtons
# incButton is on the bottom of page, decButton is on the top!
incButton_image=(
arrowUp,
arrowDown,
arrowHover,
arrowUp,
),
incButton_relief=None,
incButton_scale=(self.arrowButtonXScale, 1,
self.arrowButtonZScale),
incButton_pos=incButtonPos,
# Make the disabled button fade out
incButton_image3_color=Vec4(1, 1, 1, 0.2),
decButton_image=(
arrowUp,
arrowDown,
arrowHover,
arrowUp,
),
decButton_relief=None,
decButton_scale=(self.arrowButtonXScale, 1,
-self.arrowButtonZScale),
decButton_pos=decButtonPos,
# Make the disabled button fade out
decButton_image3_color=Vec4(1, 1, 1, 0.2),
# itemFrame is a DirectFrame, shift it down a bit to match top left scroll
itemFrame_pos=(self.itemFrameXorigin, 0, -0.03),
# each item is a button with text on it
numItemsVisible=4,
# so we select the day when we click on a scroll button
incButtonCallback=self.scrollButtonPressed,
decButtonCallback=self.scrollButtonPressed,
)
# make sure the arrow buttons appear over item frame
itemFrameParent = self.scrollList.itemFrame.getParent()
self.scrollList.incButton.reparentTo(self.scrollDownLocator)
self.scrollList.decButton.reparentTo(self.scrollUpLocator)
arrowUp.removeNode()
arrowDown.removeNode()
arrowHover.removeNode()
# Set up a clipping plane to truncate names that would extend
# off the right end of the scrolled list.
clipper = PlaneNode('clipper')
clipper.setPlane(Plane(Vec3(-1, 0, 0), Point3(0.23, 0, 0)))
clipNP = self.scrollList.component('itemFrame').attachNewNode(clipper)
self.scrollList.component('itemFrame').setClipPlane(clipNP)
def __init__(self, parent):
self.parent = parent
self.baseNode = self.parent.attachNewNode(self.__class__.__name__)
x1 = -200
y1 = -200
x2 = 200
y2 = 200
z = 0.0
#waterNP = NodePath("Water Node Parent")
#waterNP.reparentTo(parent)
#sn = self.drawSquare(-100, -100, 0, 100, 100, 0);
#sn.reparentTo(self.baseNode)
water = Square(self.baseNode, Point3(x1, y1, 0.2), Point3(x2, y2, 0.2),
Vec4(0.0, 0.0, 0.5, 0.5))
wNp = water.draw()
t1 = loader.loadTexture('assets/textures/wave.png')
t1.setWrapU(Texture.WMRepeat)
t1.setWrapV(Texture.WMRepeat)
wNp.setTexture(t1)
# Water Shader from
# http://www.panda3d.org/forums/viewtopic.php?p=70853&sid=53d92b5ae1683bd9458f21d6026ad36e
# anim: vx, vy, scale, skip
# distort: offset, strength, refraction factor (0 = perfect mirror,
# 1 = total refraction), refractivity
anim = (.022, -.012, 2.5, 0)
distort = (.1, 2, .5, .45)
self.buffer = base.win.makeTextureBuffer('waterBuffer', 512, 512)
self.watercamNP = base.makeCamera(self.buffer)
# Create water surface using a card
# The surface will be centered and
maker = CardMaker('water') # Water surface
maker.setFrame(x1, x2, y1, y2)
self.waterNP = self.baseNode.attachNewNode(maker.generate())
self.waterNP.setPosHpr((0, 0, z), (0, -90, 0))
self.waterNP.setTransparency(TransparencyAttrib.MAlpha)
self.waterNP.setTwoSided(True)
# Attach the water shader to the water shader surface
waterShader = Shader.load("shaders/water.sha")
self.waterNP.setShader(waterShader)
self.waterNP.setShaderInput('wateranim', anim)
self.waterNP.setShaderInput('waterdistort', distort)
self.waterNP.setShaderInput('time', 0)
self.waterPlane = Plane((0, 0, z + 1), (0, 0, z)) # Reflection plane
PlaneNode('waterPlane').setPlane(self.waterPlane)
self.buffer.setClearColor((0, 0, 0.5, 1)) # buffer
self.watercamNP.reparentTo(self.baseNode) # reflection camera
cam = self.watercamNP.node()
cam.getLens().setFov(base.camLens.getFov())
cam.getLens().setNearFar(1, 5000)
cam.setInitialState(RenderState.make(CullFaceAttrib.makeReverse()))
cam.setTagStateKey('Clipped')
cam.setTagState(
'True',
RenderState.make(ShaderAttrib.make().setShader(
loader.loadShader('shaders/splut3Clipped.sha'))))
tex0 = self.buffer.getTexture() # reflection texture, created in
# realtime by the 'water camera'
tex0.setWrapU(Texture.WMClamp)
tex0.setWrapV(Texture.WMClamp)
self.waterNP.setTexture(TextureStage('reflection'), tex0)
self.waterNP.setTexture(
TextureStage('distortion'),
loader.loadTexture(
'assets/textures/water.png')) # distortion texture
self.task = taskMgr.add(self.update, 'waterUpdate', sort=50)
class CameraHandler(DirectObject.DirectObject):
def __init__(self, showbase):
self.showbase = showbase
self.showbase.disableMouse()
# This disables the default mouse based camera control used by panda. This default control is awkward, and won't be used.
self.showbase.camera.setPos(0, -150, 200)
self.showbase.camera.lookAt(0, 0, 0)
# Gives the camera an initial position and rotation.
self.mx, self.my = 0, 0
# Sets up variables for storing the mouse coordinates
self.orbiting = False
# A boolean variable for specifying whether the camera is in orbiting mode. Orbiting mode refers to when the camera is being moved
# because the user is holding down the right mouse button.
self.target = Vec3()
# sets up a vector variable for the camera's target. The target will be the coordinates that the camera is currently focusing on.
self.camDist = 150
# A variable that will determine how far the camera is from it's target focus
self.panRateDivisor = 10
# This variable is used as a divisor when calculating how far to move the camera when panning. Higher numbers will yield slower panning
# and lower numbers will yield faster panning. This must not be set to 0.
self.panZoneSize = .1
# This variable controls how close the mouse cursor needs to be to the edge of the screen to start panning the camera. It must be less than 1,
# and I recommend keeping it less than .2
self.panLimitsX = Vec2(-1000, 1000)
self.panLimitsY = Vec2(-1000, 1000)
# These two vairables will serve as limits for how far the camera can pan, so you don't scroll away from the map.
self.maxZoomOut = 500
self.maxZoomIn = 25
#These two variables set the max distance a person can zoom in or out
self.orbitRate = 75
# This is the rate of speed that the camera will rotate when middle mouse is pressed and mouse moved
# recommended rate 50-100
self.setTarget(0, 0, 0)
# calls the setTarget function to set the current target position to the origin.
self.turnCameraAroundPoint(0, 0)
# calls the turnCameraAroundPoint function with a turn amount of 0 to set the camera position based on the target and camera distance
self.accept("mouse2", self.startOrbit)
# sets up the camrea handler to accept a right mouse click and start the "drag" mode.
self.accept("mouse2-up", self.stopOrbit)
# sets up the camrea handler to understand when the right mouse button has been released, and ends the "drag" mode when
# the release is detected.
self.storeX = 0
self.storeY = 0
# for storing of the x and y for the orbit
# The next pair of lines use lambda, which creates an on-the-spot one-shot function.
self.accept("wheel_up", self.zoomIn)
# sets up the camera handler to detet when the mouse wheel is rolled upwards and uses a lambda function to call the
# adjustCamDist function with the argument 0.9
self.accept("wheel_down", self.zoomOut)
# sets up the camera handler to detet when the mouse wheel is rolled upwards and uses a lambda function to call the
# adjustCamDist function with the argument 1.1
# Keys array (down if 1, up if 0)
self.keys = {"cam-left": 0, "cam-right": 0, "cam-up": 0, "cam-down": 0}
# Using Arrow Keys
self.accept("arrow_left", self.setValue, [self.keys, "cam-left", 1])
self.accept("arrow_right", self.setValue, [self.keys, "cam-right", 1])
self.accept("arrow_up", self.setValue, [self.keys, "cam-up", 1])
self.accept("arrow_down", self.setValue, [self.keys, "cam-down", 1])
self.accept("arrow_left-up", self.setValue, [self.keys, "cam-left", 0])
self.accept("arrow_right-up", self.setValue,
[self.keys, "cam-right", 0])
self.accept("arrow_up-up", self.setValue, [self.keys, "cam-up", 0])
self.accept("arrow_down-up", self.setValue, [self.keys, "cam-down", 0])
self.keyPanRate = 1.5
# pan rate for when user presses the arrow keys
# set up plane for checking collision with for mouse-3d world
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
def destroy(self):
self.ignoreAll()
def setValue(self, array, key, value):
array[key] = value
def clamp(self, val, minVal, maxVal):
val = min(max(val, minVal), maxVal)
return val
def zoomOut(self):
if self.camDist <= self.maxZoomOut:
self.adjustCamDist(1.1)
return True
def zoomIn(self):
if self.camDist >= self.maxZoomIn:
self.adjustCamDist(0.9)
return True
def turnCameraAroundPoint(self, deltaX, deltaY):
# This function performs two important tasks. First, it is used for the camera orbital movement that occurs when the
# right mouse button is held down. It is also called with 0s for the rotation inputs to reposition the camera during the
# panning and zooming movements.
# The delta inputs represent the change in rotation of the camera, which is also used to determine how far the camera
# actually moves along the orbit.
newCamHpr = Vec3()
newCamPos = Vec3()
# Creates temporary containers for the new rotation and position values of the camera.
camHpr = self.showbase.camera.getHpr()
# Creates a container for the current HPR of the camera and stores those values.
newCamHpr.setX(camHpr.getX() + deltaX)
newCamHpr.setY(self.clamp(camHpr.getY() - deltaY, -85, -10))
newCamHpr.setZ(camHpr.getZ())
# Adjusts the newCamHpr values according to the inputs given to the function. The Y value is clamped to prevent
# the camera from orbiting beneath the ground plane and to prevent it from reaching the apex of the orbit, which
# can cause a disturbing fast-rotation glitch.
self.showbase.camera.setHpr(newCamHpr)
# Sets the camera's rotation to the new values.
angleradiansX = newCamHpr.getX() * (math.pi / 180.0)
angleradiansY = newCamHpr.getY() * (math.pi / 180.0)
# Generates values to be used in the math that will calculate the new position of the camera.
newCamPos.setX(self.camDist * math.sin(angleradiansX) *
math.cos(angleradiansY) + self.target.getX())
newCamPos.setY(-self.camDist * math.cos(angleradiansX) *
math.cos(angleradiansY) + self.target.getY())
newCamPos.setZ(-self.camDist * math.sin(angleradiansY) +
self.target.getZ())
self.showbase.camera.setPos(newCamPos.getX(), newCamPos.getY(),
newCamPos.getZ())
# Performs the actual math to calculate the camera's new position and sets the camera to that position.
#Unfortunately, this math is over my head, so I can't fully explain it.
self.showbase.camera.lookAt(self.target.getX(), self.target.getY(),
self.target.getZ())
# Points the camera at the target location.
def getTarget(self):
return self.target
# returns the cur
def setTarget(self, x, y, z):
#This function is used to give the camera a new target position.
x = self.clamp(x, self.panLimitsX.getX(), self.panLimitsX.getY())
self.target.setX(x)
y = self.clamp(y, self.panLimitsY.getX(), self.panLimitsY.getY())
self.target.setY(y)
self.target.setZ(z)
# Stores the new target position values in the target variable. The x and y values are clamped to the pan limits.
def setPanLimits(self, xMin, xMax, yMin, yMax):
# This function is used to set the limitations of the panning movement.
self.panLimitsX = (xMin, xMax)
self.panLimitsY = (yMin, yMax)
# Sets the inputs into the limit variables.
def startOrbit(self):
# This function puts the camera into orbiting mode.
# Get windows properties
props = WindowProperties()
# Set Hide Cursor Property
#props.setCursorHidden(True)
# Set properties
self.showbase.win.requestProperties(props)
# hide cursor
if self.showbase.mouseWatcherNode.hasMouse():
# We're going to use the mouse, so we have to make sure it's in the game window. If it's not and we try to use it, we'll get
# a crash error.
mpos = self.showbase.mouseWatcherNode.getMouse()
self.storeX = mpos.getX()
self.storeY = mpos.getY()
# take current cursor values
self.showbase.win.movePointer(0,
self.showbase.win.getXSize() / 2,
self.showbase.win.getYSize() / 2)
# set to center
self.mx = 0
self.my = 0
self.orbiting = True
# Sets the orbiting variable to true to designate orbiting mode as on.
def stopOrbit(self):
# This function takes the camera out of orbiting mode.
self.orbiting = False
# Sets the orbiting variable to false to designate orbiting mode as off.
self.showbase.win.movePointer(
0, int((self.storeX + 1.0) / 2 * self.showbase.win.getXSize()),
int(self.showbase.win.getYSize() -
((self.storeY + 1.0) / 2 * self.showbase.win.getYSize())))
# set to taken cursor values from startOrbit
if self.showbase.mouseWatcherNode.hasMouse():
# We're going to use the mouse, so we have to make sure it's in the game window. If it's not and we try to use it, we'll get
# a crash error.
mpos = self.showbase.mouseWatcherNode.getMouse()
self.mx = mpos.getX()
self.my = mpos.getY()
# Get windows properties
props = WindowProperties()
# Set Hide Cursor Property
props.setCursorHidden(False)
# Set properties
self.showbase.win.requestProperties(props)
# reshow cursor
def adjustCamDist(self, distFactor):
# This function increases or decreases the distance between the camera and the target position to simulate zooming in and out.
# The distFactor input controls the amount of camera movement.
# For example, inputing 0.9 will set the camera to 90% of it's previous distance.
self.camDist = self.camDist * distFactor
# Sets the new distance into self.camDist.
self.turnCameraAroundPoint(0, 0)
# Calls turnCameraAroundPoint with 0s for the rotation to reset the camera to the new position.
def camMoveTask(self, dt):
# This task is the camera handler's work house. It's set to be called every frame and will control both orbiting and panning the camera.
if self.showbase.mouseWatcherNode.hasMouse():
# We're going to use the mouse, so we have to make sure it's in the game window. If it's not and we try to use it, we'll get
# a crash error.
mpos = self.showbase.mouseWatcherNode.getMouse()
# Gets the mouse position
if self.orbiting:
# Checks to see if the camera is in orbiting mode. Orbiting mode overrides panning, because it would be problematic if, while
# orbiting the camera the mouse came close to the screen edge and started panning the camera at the same time.
self.turnCameraAroundPoint(
(self.mx - mpos.getX()) * self.orbitRate * dt,
(self.my - mpos.getY()) * self.orbitRate * dt)
else:
# If the camera isn't in orbiting mode, we check to see if the mouse is close enough to the edge of the screen to start panning
moveY = False
moveX = False
# these two booleans are used to denote if the camera needs to pan. X and Y refer to the mouse position that causes the
# panning. X is the left or right edge of the screen, Y is the top or bottom.
if self.my > (1 - self.panZoneSize):
angleradiansX1 = self.showbase.camera.getH() * (math.pi /
180.0)
panRate1 = (1 - self.my - self.panZoneSize) * (
self.camDist / self.panRateDivisor)
moveY = True
if self.my < (-1 + self.panZoneSize):
angleradiansX1 = self.showbase.camera.getH() * (
math.pi / 180.0) + math.pi
panRate1 = (1 + self.my - self.panZoneSize) * (
self.camDist / self.panRateDivisor)
moveY = True
if self.mx > (1 - self.panZoneSize):
angleradiansX2 = self.showbase.camera.getH() * (
math.pi / 180.0) + math.pi * 0.5
panRate2 = (1 - self.mx - self.panZoneSize) * (
self.camDist / self.panRateDivisor)
moveX = True
if self.mx < (-1 + self.panZoneSize):
angleradiansX2 = self.showbase.camera.getH() * (
math.pi / 180.0) - math.pi * 0.5
panRate2 = (1 + self.mx - self.panZoneSize) * (
self.camDist / self.panRateDivisor)
moveX = True
# These four blocks check to see if the mouse cursor is close enough to the edge of the screen to start panning and then
# perform part of the math necessary to find the new camera position. Once again, the math is a bit above my head, so
# I can't properly explain it. These blocks also set the move booleans to true so that the next lines will move the camera.
# If up or down keys are pressed
if self.keys["cam-up"] ^ self.keys["cam-down"]:
moveY = True
panRate1 = self.keyPanRate
# Update warlock position on z plane
if self.keys["cam-up"]:
angleradiansX1 = self.showbase.camera.getH() * (
math.pi / 180.0) + math.pi
if self.keys["cam-down"]:
angleradiansX1 = self.showbase.camera.getH() * (
math.pi / 180.0)
# If left or right keys are pressed
if self.keys["cam-left"] ^ self.keys["cam-right"]:
moveX = True
panRate2 = self.keyPanRate
# Update warlock position on x plane
if self.keys["cam-left"]:
angleradiansX2 = self.showbase.camera.getH() * (
math.pi / 180.0) + math.pi * 0.5
if self.keys["cam-right"]:
angleradiansX2 = self.showbase.camera.getH() * (
math.pi / 180.0) - math.pi * 0.5
if moveY:
tempX = self.target.getX(
) + math.sin(angleradiansX1) * panRate1 * dt * 50
tempX = self.clamp(tempX, self.panLimitsX.getX(),
self.panLimitsX.getY())
self.target.setX(tempX)
tempY = self.target.getY(
) - math.cos(angleradiansX1) * panRate1 * dt * 50
tempY = self.clamp(tempY, self.panLimitsY.getX(),
self.panLimitsY.getY())
self.target.setY(tempY)
self.turnCameraAroundPoint(0, 0)
if moveX:
tempX = self.target.getX(
) - math.sin(angleradiansX2) * panRate2 * dt * 50
tempX = self.clamp(tempX, self.panLimitsX.getX(),
self.panLimitsX.getY())
self.target.setX(tempX)
tempY = self.target.getY(
) + math.cos(angleradiansX2) * panRate2 * dt * 50
tempY = self.clamp(tempY, self.panLimitsY.getX(),
self.panLimitsY.getY())
self.target.setY(tempY)
self.turnCameraAroundPoint(0, 0)
# These two blocks finalize the math necessary to find the new camera position and apply the transformation to the
# camera's TARGET. Then turnCameraAroundPoint is called with 0s for rotation, and it resets the camera position based
# on the position of the target. The x and y values are clamped to the pan limits before they are applied.
#print(self.target)
self.mx = mpos.getX()
self.my = mpos.getY()
# The old mouse positions are updated to the current mouse position as the final step.
# Finds 3d world point on the z = 0 plane for destination/target
def getMouse3D(self):
# make sure process has the mouse to not cause error
if self.showbase.mouseWatcherNode.hasMouse():
# get screen coordinates of mouse
mpos = self.showbase.mouseWatcherNode.getMouse()
pos3d = Point3()
nearPoint = Point3()
farPoint = Point3()
# find vector of cameras facing from mouse screen coordinates and get near and far points on frustrum
self.showbase.camLens.extrude(mpos, nearPoint, farPoint)
# check for intersection with z = 0 plane
if self.plane.intersectsLine(
pos3d,
self.showbase.render.getRelativePoint(
self.showbase.camera, nearPoint),
self.showbase.render.getRelativePoint(
self.showbase.camera, farPoint)):
# return this position if exists
return pos3d
# or return (-1, -1, -1)
return Vec3(-1, -1, -1)
class Hero(DirectObject):
def __init__(self,no):
self.HeroStats(no)
self.display()
# self.displaynot()
self.SetupEvents()
self.Collision()
self.Loader()
self.SkillStatus()
self.sec=0
self.min=0
self.heroPace=None
self.timesec = OnscreenText(text = '', pos = (1.2,-0.725),fg=(1,1,1,1),mayChange=1,scale=0.05)
self.timemin = OnscreenText(text = '', pos = (1,-0.725),fg=(1,1,1,1),mayChange=1,scale=0.05)
self.deathtxt=OnscreenText(text="",pos=(0.5,0.9),scale=0.5)
taskMgr.add(self.update,"update")
taskMgr.doMethodLater(1,self.Second,"second")
taskMgr.add(self.MousePos,"mouse")
def HeroStats(self,no):
self.char={}
self.char=hero[no]
self.name=self.char['name']
self.model=Actor(MYDIRMODEL+self.char['model']+'.egg')
self.type=None
self.heroicon=self.char['icon'][0]
self.skillicons=(self.char['icon'][1],self.char['icon'][2],self.char['icon'][3],self.char['icon'][4])
self.StartPos=Point3(25,25,0)
self.gold=4000
self.goldrate = 1
self.items=[-1,-1,-1,-1,-1,-1] #each stores the no of the item
self.itemindex=0
self.itemname="self.itemb"
self.range=self.char['range']
self.strdt=self.char['strdt']
self.agidt=self.char['agidt']
self.intdt=self.char['intdt']
self.type=self.char['type']
self.Delta1=0
self.Delta2=0
self.Delta3=0
self.Delta4=0
self.Delta5=0
self.lvl=0
self.xp=0
self.Input=None
self.str=self.char['str']+(self.strdt*self.lvl)
self.agi=self.char['agi'] + (self.agidt*self.lvl)
self.int=self.char['int'] +(self.intdt*self.lvl)
self.basehp=590+self.str*19
self.basemp=220+(self.int*13)
self.maxhp=590 +(self.str*19)
self.curhp=self.maxhp
self.maxmp=220 +(self.int*13)
self.curmp=self.maxmp
self.armor=self.char['armor'] +(self.agi/7)
self.atkspeed=1.5/self.agi
if self.type=='str':
self.TYPESTR()
if self.type=='agi':
self.TYPEAGI()
if self.type=='int':
self.TYPEINT()
self.healrate=0.003 *self.str
self.mprate=0.02 *self.int
self.res=0.25
self.speed=self.char['speed']
self.skill=0
self.isDead=False
self.lon=pi*(self.getX()+10)*(self.getY()+10)
def Loader(self):
self.model=Actor("models/ralph", {"run": "models/ralph-run"})
# self.model=Actor(MYDIRMODEL+self.model+'.egg')
self.model.setScale(3)
# self.model.setHpr(90,270,0)
self.model.setTransparency(0.5)
# self.model.setScale(0.1)
self.model.setPos(self.StartPos)
self.model.reparentTo(render)
# self.model.setColor(0, 0, 0, 0)
self.model.loop("run")
# self.Input=Input(self.model)
Flame(self,self.model)
#-------------------------------------------------------------Display Function---------------------------------------------------#
def TYPESTR(self):
self.mindamage=self.char['min']+self.str+self.Delta1
self.maxdamage=self.char['max']+self.str+self.Delta1
self.damage=range(int(self.mindamage),int(self.maxdamage))
def TYPEAGI(self):
self.mindamage=self.char['min']+self.agi+self.Delta1
self.maxdamage=self.char['max']+self.agi+self.Delta1
self.damage=range(int(self.mindamage),int(self.maxdamage))
def TYPEINT(self):
self.mindamage=self.char['min']+self.int+self.Delta1
self.maxdamage=self.char['max']+self.int+self.Delta1
self.damage=range(int(self.mindamage),int(self.maxdamage))
def TYPE(self):
pass
def display(self):
x,y,z=self.model.getX(),self.model.getY(),self.model.getZ()
base.camera.setPos(x,y,z+180)
base.camera.setP(-30)
base.camera.lookAt(self.model)
self.panel=aspect2d.attachNewNode("panel")
self.panel.setTransparency(1)
self.SKNode=aspect2d.attachNewNode("skl")
self.SKNode.setTransparency(0)
self.HP=DirectLabel(text='',parent = self.panel,text_fg=(0,0.9,0,1),frameColor=(0,0,0,0),pos=(-0.41,0,-0.850),scale=0.04)
self.MP=DirectLabel(text='',parent = self.panel,text_fg=(0,0,0.8,1),frameColor=(0,0,0,0),pos=(-0.41,0,-0.912),scale=0.04)
self.LVL=DirectLabel(text ="Level %d"%(self.lvl+1),parent = self.panel,text_fg=(0,0,0,1),frameColor=(0,0,0,0),pos =(-0.5,0,-0.79),scale=Sc)
Text1(self,"Damage",-0.26,-0.02,-1)
Text1(self,"Armor",-0.27,0.03,-1)
Text1(self,"Str",-0.25,0.085,-1)
Text1(self,"Agi",-0.25,0.13,-1)
Text1(self,"Int",-0.25,0.17,-1)
self.DAM=Text2(self,"%d-%d",(self.mindamage-self.Delta1,self.maxdamage-self.Delta1),-0.40,-0.02,-1)
self.ARM=Text2(self,"%d",(self.armor-self.Delta2),-0.40,0.03,-1)
self.STR=Text2(self,"%d",(self.str-self.Delta3),-0.40,0.085,-1)
self.AGI=Text2(self,"%d",(self.agi-self.Delta4),-0.40,0.13,-1)
self.INT=Text2(self,"%d",(self.int-self.Delta5),-0.40,0.17,-1)
if self.Delta1!=0:
self.damdelta=Text3(self,"%d",self.Delta1,-0.4,-0.02,-1)
if self.Delta2!=0:
self.armdelta=Text3(self,"%d",self.Delta2,-0.4,0.03,-1)
if self.Delta3!=0:
self.strdelta=Text3(self,"%d",self.Delta3,-0.36,0.085,-1)
if self.Delta4!=0:
self.agidelta=Text3(self,"%d",self.Delta4,-0.44,0.13,-1)
if self.Delta5!=0:
self.intdelta=Text3(self,"%d",self.Delta5,-0.44,0.17,-1)
self.hpbar = DirectWaitBar(barColor=(0,0.176470,0,1),parent = self.panel,scale=(0.3,0,0.23), frameColor=(0,0,0,1),pos = (0,0,-0.84))
self.mpbar=DirectWaitBar(barColor=(0,0,0.6,1),parent = self.panel,scale=(0.3,0,0.23), frameColor=(0,0,0,1),pos = (0,0,-0.90))
self.lvlbar=DirectWaitBar(barColor=(0,0,0.2,1),parent = self.panel,image='glue/lvlbar.png',image_scale=(1.1,0,0.2),scale=0.35, pos = (0,0,-0.8))
self.lvlbar.setTransparency(1)
self.lvlbar.detachNode()
self.skbtn1=DirectButton(image=self.skillicons[0]+'.png',parent=self.SKNode,pos=(posx-1.3,0,posy-1.2),pad=(-0.1,-0.1),scale=biconscale,command=self.SkillNo,extraArgs=[0])
self.skbtn2=DirectButton(image=self.skillicons[1]+'.png',parent=self.SKNode,pos=(posx-1.3+0.14,0,posy-1.2),pad=(-0.1,-0.1),scale=biconscale,command=self.SkillNo,extraArgs=[1])
self.skbtn3=DirectButton(image=self.skillicons[2]+'.png',parent=self.SKNode,pos=(posx-1.3+0.28,0,posy-1.2),pad=(-0.1,-0.1),scale=biconscale,command=self.SkillNo,extraArgs=[2])
self.skbtn4=DirectButton(image=self.skillicons[3]+'.png',parent=self.SKNode,pos=(posx-1.3+0.42,0,posy-1.2),pad=(-0.1,-0.1),scale=biconscale,command=self.SkillNo,extraArgs=[3])
self.b2 = DirectButton(text ="dam",parent = self.panel,pos=(-0.5,0,0),enableEdit=1,scale=(0.25,0,0.1),command=self.hurt,extraArgs=[200])
self.b3 = DirectButton(text ="",image='tome.tga',pos=(0.5,0,0),frameColor=(0,0,0,0),pad=(-0.1,-0.1),enableEdit=1,scale=(0.07,0,0.07),command=self.itemBuy,extraArgs=[0,300])
self.GOLD=OnscreenText(text='',fg=(1,1,1,1),pos=(1.225,-0.84),scale=0.05)
# self.escapeEvent = OnscreenText(text=HELPTEXT, font = font,style=1, fg=(1,1,1,1), pos=(-0.82, -0.725),align=TextNode.ALeft, scale = .045)
def displaynot(self):
self.panel.detachNode()
self.SKNode.detachNode()
#------------------------------------------------------------Set Functions--------------------------------------------------------#
def setDamage(self,amt):
if delta >1:
self.damage+=delta
else:
self.damage=self.damage+self.damage*delta
def Delta(self,amt1,amt2,amt3,amt4,amt5):
if amt1!=0: #After changes occur for that period the taks sets the values to zero
self.Delta1+=amt1
if amt2!=0:
self.Delta2+=amt2
if amt3!=0:
self.Delta3+=amt3
if amt4!=0:
self.Delta4+=amt3
if amt5!=0:
self.Delta5+=amt3
def hurt(self,amt):
if self.curhp>0:
if self.curhp<=self.maxhp:
self.curhp-=amt*1
def hurtMag(self,delta):
if self.curhp>0:
if self.curhp<=self.maxhp:
self.curhp-=delta*self.res
def heal(self,delta):
if self.curhp!=self.maxhp:
if self.curhp < self.maxhp:
self.curhp+=delta
def replenish(self,delta):
if self.curmp!=self.maxmp:
if self.curmp < self.maxmp:
if self.curmp>0:
self.curmp+=delta
def manaspend(self,amt):
if self.curmp>amt:
self.curmp-=amt
def setSpeed(self,delta):
if delta > 1:
self.speed+=delta
else:
self.speed=self.speed+self.speed*delta
def setArmor(self,delta):
self.armor+=delta
def setPos(self,x,y,z):
self.model.setPos(x,y,z)
def setHPColor(self):
if self.curhp<0.25*self.maxhp:
self.hpbar['barColor']=(1,0,0,1)
elif self.curhp<0.5*self.maxhp:
self.hpbar['barColor']=(1,0.5,0,1)
elif self.curhp<0.75*self.maxhp:
self.hpbar['barColor']=(1,1,0,1)
else:
self.hpbar['barColor']=(0,0.176470,0,1)
#-------------------------------------------------------------Setup Keys And EVENTS--------------------------------------------------#
def SetupEvents(self):
self.dt=0
self.keyMap = {"left":0, "right":0, "forward":0}
self.isMoving = False
self.Change=False
self.Animate=False
self.pos3d=None
self.target=Point3()
self.dist=0
self.floater = NodePath(PandaNode("floater"))
self.floater.reparentTo(render)
self.Text = OnscreenText(text="Set PanRate",pos=(-1.25,-0.15),scale=0.1)
self.slider = DirectSlider(range=(20,100), value=50, pageSize=2, pos=(-1.25,0,-0.2),scale= (0.2,0.2,0.2), command=self.setScrollSpeed)
self.dumm=loader.loadModel("models/panda.egg")
self.dumm.reparentTo(render)
self.dumm.setTag("Unit",'1')
self.dumm.setPos(0,0,0)
self.mini=0
self.x1,self.y1=self.model.getX(),self.model.getY()
self.x2,self.y2=self.dumm.getX(),self.dumm.getY()
self.fired=False
self.atk=Attack(self.model,self.dumm,1.4)
self.accept("arrow_left", self.setKey1, ["left",1,True])
self.accept("arrow_right", self.setKey1, ["right",1,True])
self.accept("arrow_up", self.setKey1, ["forward",1,True])
self.accept("arrow_left-up", self.setKey1, ["left",0,False])
self.accept("arrow_right-up", self.setKey1, ["right",0,False])
self.accept("arrow_up-up", self.setKey1, ["forward",0,False])
self.accept("mouse1",self.ObjectClick)
self.accept("mouse3",self.MoveHero)
def MoveHero(self):
self.startR=self.model.getHpr()
self.target=self.mpos3d
x2,y2,z2=self.target.getX(),self.target.getY(),self.target.getZ()
h1,p1,r1=self.model.getH(),self.model.getP(),self.model.getR()
self.dist=sqrt(pow(self.x1-x2,2)+pow(self.y1-y2,2))
self.sptime=self.dist/(self.speed)
self.hall=270-degrees(y2/x2)
# self.model.setPos(self.model,self.spd,0,self.spd)
self.Inter=LerpPosHprInterval(self.model,self.sptime,pos=self.target ,startPos=self.model.getPos(),startHpr=self.startR,hpr=self.startR)#(h1,p1,self.hall))
#Inter2=Func(self.model.lookAt(self.target),Wait(0.3))
self.heroPace = Sequence(self.Inter,name="heroPace")
self.heroPace.start()
def Collision(self):
self.mpos3d=0
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
base.cTrav = CollisionTraverser()
self.collHandler = CollisionHandlerQueue()
self.pickerNode = CollisionNode('mouseRay')
self.pickerNP = camera.attachNewNode(self.pickerNode)
self.pickerNode.setFromCollideMask(GeomNode.getDefaultCollideMask())
self.pickerRay = CollisionRay()
self.pickerNode.addSolid(self.pickerRay)
base.cTrav.addCollider(self.pickerNP, self.collHandler)
def ObjectClick(self):
if base.mouseWatcherNode.hasMouse():
mpos = base.mouseWatcherNode.getMouse()
self.pickerRay.setFromLens(base.camNode, mpos.getX(), mpos.getY())
base.cTrav.traverse(render) # Assume for simplicity's sake that myHandler is a CollisionHandlerQueue.
if self.collHandler.getNumEntries() > 0: # This is so we get the closest object.
self.collHandler.sortEntries()
self.pickedObj = self.collHandler.getEntry(0).getIntoNodePath()
self.pickedObj = self.pickedObj.findNetTag('Unit')
if not self.pickedObj.isEmpty():
self.Attack(self.pickedObj.getPos())
#Handles the object
def setKey1(self, key, value,value2):
self.keyMap[key] = value
self.Change=value2
def checkKeys(self):
if (self.keyMap["left"]!=0):
self.model.setH(self.model.getH() + self.dt*300)
if (self.keyMap["right"]!=0):
self.model.setH(self.model.getH() - self.dt*300)
if (self.keyMap["forward"]!=0):
self.model.setX(self.model, +(self.dt*25*SPEED))
def checkAnim(self):
if self.Change: #(self.keyMap["forward"]!=0) or (self.keyMap["left"]!=0) or (self.keyMap["right"]!=0):
if self.isMoving is False:
self.model.loop("run")
self.isMoving = True
else:
if self.isMoving:
self.model.stop()
self.model.pose("walk",5)
self.isMoving = False
if self.Animate:
pass
def Attack(self,pos):
self.atk.setWeil(self.model)
self.atk.setTarg(self.dumm)
self.atk.setDist(self.mini)
if self.mini<=60:
self.Animate=self.atk.ATT()
else:
messenger.send('mouse3')
if self.mini<=60:
self.atk.ATT()
def setScrollSpeed(self):
SCROLLSPEED=self.slider['value']
def UnSetupEvents(self):
self.ignore("arrow_left")
self.ignore("arrow_right")
self.ignore("arrow_up")
self.ignore("arrow_left-up")
self.ignore("arrow_right-up")
self.ignore("arrow_up-up")
self.ignore("enter")
self.ignore("mouse1")
self.ignore("mouse3")
taskMgr.remove("update")
taskMgr.remove("second")
taskMgr.remove("mouse")
#--------------------------------------------------------------Return Functions------------------------------------------------------#
def getDamage(self):
return self.damage
def getPos(self):
return self.model.getPos()
def getX(self):
return self.model.getX()
def getY(self):
return self.model.getY()
def getZ(self):
return self.model.getZ()
def getlvl(self):
return self.lvl
def getModel(self):
return self.model
def gainxp(self,unit):
self.xp+=unit
def gainGold(self,gain):
self.gold+=gain
def sendTime(self,min,sec):
self.min=min
self.sec=sec
#----------------------------------------------------------------ITEM FUNCTIONS--------------------------------------------------------#
def itemBuy(self,arg,cost):
if self.gold>=0:
if self.itemindex<=5:
del self.items[self.itemindex]
self.items.insert(self.itemindex,arg)
self.gainGold(-cost)
if self.items[self.itemindex]!=-1:
if self.itemindex==0:
self.itm0= aspect2d.attachNewNode("item0")
DirectButton(text ="",parent=self.itm0,image='tome.tga',pos=(0+0.12*self.itemindex,0,-0.90),pad=(-0.1,-0.1),scale=(0.05,0,0.05),extraArgs=[arg,cost],command=self.itemSold)#,commandButtons=DGG.RMB)
if self.itemindex==1:
self.itm1= aspect2d.attachNewNode("item1")
DirectButton(text ="",parent=self.itm1,image='tome.tga',pos=(0+0.12*self.itemindex,0,-0.90),pad=(-0.1,-0.1),scale=(0.05,0,0.05),extraArgs=[arg,cost],command=self.itemSold)#,commandButtons=DGG.RMB)
if self.itemindex==2:
self.itm2= aspect2d.attachNewNode("item2")
DirectButton(text ="",parent=self.itm2,image='tome.tga',pos=(0+0.12*self.itemindex,0,-0.90),pad=(-0.1,-0.1),scale=(0.05,0,0.05),extraArgs=[arg,cost],command=self.itemSold)#,commandButtons=DGG.RMB)
if self.itemindex==3:
self.itm3= aspect2d.attachNewNode("item3")
DirectButton(text ="",parent=self.itm3,image='tome.tga',pos=(0+0.12*self.itemindex,0,-0.90),pad=(-0.1,-0.1),scale=(0.05,0,0.05),extraArgs=[arg,cost],command=self.itemSold)#,commandButtons=DGG.RMB)
if self.itemindex==4:
self.itm4= aspect2d.attachNewNode("item4")
DirectButton(text ="",parent=self.itm4,image='tome.tga',pos=(0+0.12*self.itemindex,0,-0.90),pad=(-0.1,-0.1),scale=(0.05,0,0.05),extraArgs=[arg,cost],command=self.itemSold)#,commandButtons=DGG.RMB)
if self.itemindex==5:
self.itm5= aspect2d.attachNewNode("item5")
DirectButton(text ="",parent=self.itm5,image='tome.tga',pos=(0+0.12*self.itemindex,0,-0.90),pad=(-0.1,-0.1),scale=(0.05,0,0.05),extraArgs=[arg,cost],command=self.itemSold)#,commandButtons=DGG.RMB)
self.itemindex+=1
else:
Error("No Empty Slots")
else:
Error("No Gold")
def itemSold(self,itemtosell,cost):
self.ind=self.items.index(itemtosell)
del self.items[self.ind]
self.items.insert(self.ind,-1)
self.gainGold(cost/2)
if self.ind==0:
self.itm0.detachNode()
if self.ind==1:
self.itm1.detachNode()
if self.ind==2:
self.itm2.detachNode()
if self.ind==3:
self.itm3.detachNode()
if self.ind==4:
self.itm4.detachNode()
if self.ind==5:
self.itm5.detachNode()
self.itemindex-=1
def lvlup(self):
self.lvl+=1
self.str=self.char['str'] +(self.strdt*self.lvl)
self.str=self.char['str'] +(self.agidt*self.lvl)
self.int=self.char['int'] +(self.intdt*self.lvl)
self.hpgain=(self.strdt+self.Delta1)*19
self.mpgain=(self.intdt+self.Delta3)*13
self.maxhp=590+self.str*19
self.maxmp=290+self.int*13 #some error here
self.heal(self.hpgain)
self.replenish(self.mpgain)
self.xp =0
#---------------------------------------------------------SKILL FUNCTIONS-------------------------------------#
def SkillStatus(self):
self.sp1=0
self.sp2=0
self.sp3=0
self.sp4=0
self.sp1dam=0
self.sp2dam=0
self.sp3dam=0
self.sp4dam=0
if self.sp1==1:
self.range=400
self.sp1dam=130
self.raduis=100
self.sp2dam=30
self.sp3dam=90
self.pulses=6
def SkillNo(self,arg):
if arg==0:
if self.curmp>=100:
self.accept("mouse1",Blink,extraArgs=[self])
self.skbtn1['image']='cancel.png'
# self.skbtn1['command']=self.setOpen()
else:
Error("NO MANA")
elif arg==1:
StatUp(self)
elif arg==2:
StatDn(self)
else:
Ulti(self)
def setOpen(self):
self.open=False
self.ignore("mouse1")
self.skbtn1['image']=self.skillicons[0]+'.png'
self.accept("mouse1",self.ObjectClick)
#----------------------------------------TASK FUNCTIONS------------------------------------------------------#
def Delay(self,task):
self.Delta(-2,-2,-2)
return task.done
def Second(self,task):
self.gainGold(self.goldrate)
self.heal(self.healrate)
self.replenish(self.mprate)
return task.again
def update(self,task):
self.timemin.setText(str(self.min))
self.timesec.setText(str(self.sec))
self.str=self.char['str'] +(self.strdt*self.lvl)+self.Delta3
self.agi=self.char['agi'] + (self.agidt*self.lvl)+self.Delta4
self.int=self.char['int']+(self.intdt*self.lvl)+self.Delta5
self.hpgain=(self.strdt+self.Delta1)*19
self.mpgain=(self.intdt+self.Delta3)*13
self.maxhp=590+self.str*19
self.maxmp=290+self.int*13 #some error here
# self.heal(self.hpgain)
# self.replenish(self.mpgain)
self.armor=self.char['armor'] +(self.agi/7)+self.Delta2
self.atkspeed=1.5/self.agi
if self.type=='str':
self.TYPESTR()
if self.type=='agi':
self.TYPEAGI()
if self.type=='int':
self.TYPEINT()
self.healrate=0.03 *self.str
self.mprate=0.02 *self.int
self.GOLD.setText(str(self.gold))
self.hpbar['range']=int(self.maxhp)
self.hpbar['value']=int(self.curhp)
self.mpbar['range']=int(self.maxmp)
self.mpbar['value']=int(self.curmp)
self.lvlbar['range']=int(10*self.lvl)
self.lvlbar['value']=int(self.xp)
self.HP['text']="HP"+str(int(self.curhp))+"/"+str(int(self.maxhp))
self.MP['text']="MP"+str(int(self.curmp))+"/"+str(int(self.maxmp))
self.DAM['text']=str(int(self.mindamage))+'-'+str(int(self.maxdamage))
self.ARM['text']=str(int(self.armor))
self.STR['text']=str(int(self.str))
self.AGI['text']=str(int(self.agi))
self.INT['text']=str(int(self.int))
self.LVL['text']="LEVEL "+str(int(self.lvl))
if self.xp>=20*20:
self.lvlup()
if self.curhp<=0:
taskMgr.add(self.Death,"death")
self.x1,self.y1=self.model.getX(),self.model.getY()
self.x2,self.y2=self.dumm.getX(),self.dumm.getY()
self.mini=sqrt(pow(self.x1-self.x2,2)+pow(self.y1-self.y2,2))
Debug2(self,str(self.mini))
elapsed = globalClock.getDt()
self.dt=elapsed
self.setHPColor()
self.checkAnim()
self.checkKeys()
# base.camera.lookAt(self.model)
# self.floater.setPos(self.model.getPos())
# base.camera.lookAt(self.floater)
return task.cont
def Death(self,task):
self.isDead=True
Debug2(self,str(task.time))
if self.isDead==True:
self.model.reparentTo(hidden)
self.panel.detachNode()
self.deathtime=(self.lvl+1)*3
self.isDead=False
if int(task.time)==self.deathtime:
self.model.setPos(self.StartPos)
self.model.reparentTo(render)
self.curhp=self.maxhp
self.model.loop("walk")
self.display()
taskMgr.remove("death")
# self.deathtxt.destroy()
return task.cont
def MousePos(self, task): #This Took me 1.5 Months to Learn
if base.mouseWatcherNode.hasMouse():
mpos = base.mouseWatcherNode.getMouse()
self.mpos3d = Point3()
nearPoint = Point3()
farPoint = Point3()
base.camLens.extrude(mpos, nearPoint, farPoint)
if self.plane.intersectsLine(self.mpos3d, render.getRelativePoint(camera, nearPoint),render.getRelativePoint(camera, farPoint)):
pass
return task.again
def destroy(self):
self.panel.detachNode()
self.t1.destroy()
self.t2.destroy()
self.model.remove()
self.timesec.destroy()
self.timemin.destroy()
self.UnsetupEvents()
def __init__(self, showbase):
self.showbase = showbase
self.showbase.disableMouse()
# This disables the default mouse based camera control used by panda. This default control is awkward, and won't be used.
self.showbase.camera.setPos(0, -150, 200)
self.showbase.camera.lookAt(0, 0, 0)
# Gives the camera an initial position and rotation.
self.mx, self.my = 0, 0
# Sets up variables for storing the mouse coordinates
self.orbiting = False
# A boolean variable for specifying whether the camera is in orbiting mode. Orbiting mode refers to when the camera is being moved
# because the user is holding down the right mouse button.
self.target = Vec3()
# sets up a vector variable for the camera's target. The target will be the coordinates that the camera is currently focusing on.
self.camDist = 150
# A variable that will determine how far the camera is from it's target focus
self.panRateDivisor = 10
# This variable is used as a divisor when calculating how far to move the camera when panning. Higher numbers will yield slower panning
# and lower numbers will yield faster panning. This must not be set to 0.
self.panZoneSize = .1
# This variable controls how close the mouse cursor needs to be to the edge of the screen to start panning the camera. It must be less than 1,
# and I recommend keeping it less than .2
self.panLimitsX = Vec2(-1000, 1000)
self.panLimitsY = Vec2(-1000, 1000)
# These two vairables will serve as limits for how far the camera can pan, so you don't scroll away from the map.
self.maxZoomOut = 500
self.maxZoomIn = 25
#These two variables set the max distance a person can zoom in or out
self.orbitRate = 75
# This is the rate of speed that the camera will rotate when middle mouse is pressed and mouse moved
# recommended rate 50-100
self.setTarget(0, 0, 0)
# calls the setTarget function to set the current target position to the origin.
self.turnCameraAroundPoint(0, 0)
# calls the turnCameraAroundPoint function with a turn amount of 0 to set the camera position based on the target and camera distance
self.accept("mouse2", self.startOrbit)
# sets up the camrea handler to accept a right mouse click and start the "drag" mode.
self.accept("mouse2-up", self.stopOrbit)
# sets up the camrea handler to understand when the right mouse button has been released, and ends the "drag" mode when
# the release is detected.
self.storeX = 0
self.storeY = 0
# for storing of the x and y for the orbit
# The next pair of lines use lambda, which creates an on-the-spot one-shot function.
self.accept("wheel_up", self.zoomIn)
# sets up the camera handler to detet when the mouse wheel is rolled upwards and uses a lambda function to call the
# adjustCamDist function with the argument 0.9
self.accept("wheel_down", self.zoomOut)
# sets up the camera handler to detet when the mouse wheel is rolled upwards and uses a lambda function to call the
# adjustCamDist function with the argument 1.1
# Keys array (down if 1, up if 0)
self.keys = {"cam-left": 0, "cam-right": 0, "cam-up": 0, "cam-down": 0}
# Using Arrow Keys
self.accept("arrow_left", self.setValue, [self.keys, "cam-left", 1])
self.accept("arrow_right", self.setValue, [self.keys, "cam-right", 1])
self.accept("arrow_up", self.setValue, [self.keys, "cam-up", 1])
self.accept("arrow_down", self.setValue, [self.keys, "cam-down", 1])
self.accept("arrow_left-up", self.setValue, [self.keys, "cam-left", 0])
self.accept("arrow_right-up", self.setValue,
[self.keys, "cam-right", 0])
self.accept("arrow_up-up", self.setValue, [self.keys, "cam-up", 0])
self.accept("arrow_down-up", self.setValue, [self.keys, "cam-down", 0])
self.keyPanRate = 1.5
# pan rate for when user presses the arrow keys
# set up plane for checking collision with for mouse-3d world
self.plane = Plane(Vec3(0, 0, 1), Point3(0, 0, 0))
def __init__(self, parent):
self.parent = parent
self.baseNode = self.parent.attachNewNode(self.__class__.__name__)
x1 = -200
y1 = -200
x2 = 200
y2 = 200
z = 0.0
#waterNP = NodePath("Water Node Parent")
#waterNP.reparentTo(parent)
#sn = self.drawSquare(-100, -100, 0, 100, 100, 0);
#sn.reparentTo(self.baseNode)
water = Square(self.baseNode,
Point3(x1, y1, 0.2),
Point3(x2, y2, 0.2),
Vec4(0.0,0.0,0.5,0.5))
wNp = water.draw()
t1 = loader.loadTexture( 'assets/textures/wave.png' )
t1.setWrapU(Texture.WMRepeat)
t1.setWrapV(Texture.WMRepeat)
wNp.setTexture(t1)
# Water Shader from
# http://www.panda3d.org/forums/viewtopic.php?p=70853&sid=53d92b5ae1683bd9458f21d6026ad36e
# anim: vx, vy, scale, skip
# distort: offset, strength, refraction factor (0 = perfect mirror,
# 1 = total refraction), refractivity
anim = ( .022, -.012, 2.5, 0 )
distort = ( .1, 2, .5, .45 )
self.buffer = base.win.makeTextureBuffer( 'waterBuffer', 512, 512 )
self.watercamNP = base.makeCamera( self.buffer )
# Create water surface using a card
# The surface will be centered and
maker = CardMaker( 'water' ) # Water surface
maker.setFrame( x1, x2, y1, y2 )
self.waterNP = self.baseNode.attachNewNode( maker.generate() )
self.waterNP.setPosHpr( ( 0, 0, z ), ( 0, -90, 0 ) )
self.waterNP.setTransparency( TransparencyAttrib.MAlpha )
self.waterNP.setTwoSided(True)
# Attach the water shader to the water shader surface
waterShader = Shader.load("shaders/water.sha")
self.waterNP.setShader(waterShader)
self.waterNP.setShaderInput('wateranim', anim )
self.waterNP.setShaderInput('waterdistort', distort )
self.waterNP.setShaderInput('time', 0 )
self.waterPlane = Plane( ( 0, 0, z + 1 ), ( 0, 0, z ) ) # Reflection plane
PlaneNode( 'waterPlane' ).setPlane( self.waterPlane )
self.buffer.setClearColor( ( 0, 0, 0.5, 1 ) ) # buffer
self.watercamNP.reparentTo( self.baseNode ) # reflection camera
cam = self.watercamNP.node()
cam.getLens().setFov( base.camLens.getFov() )
cam.getLens().setNearFar( 1, 5000 )
cam.setInitialState( RenderState.make( CullFaceAttrib.makeReverse() ) )
cam.setTagStateKey( 'Clipped' )
cam.setTagState('True', RenderState.make(
ShaderAttrib.make().setShader(
loader.loadShader( 'shaders/splut3Clipped.sha' ) ) ) )
tex0 = self.buffer.getTexture() # reflection texture, created in
# realtime by the 'water camera'
tex0.setWrapU( Texture.WMClamp ); tex0.setWrapV( Texture.WMClamp )
self.waterNP.setTexture( TextureStage( 'reflection' ), tex0 )
self.waterNP.setTexture( TextureStage( 'distortion' ),
loader.loadTexture( 'assets/textures/water.png' ) ) # distortion texture
self.task = taskMgr.add( self.update, 'waterUpdate', sort = 50 )
def __init__(self, world, x1, y1, x2, y2, z):
self.world = world
logging.info(('setting up water plane at z=' + str(z)))
# Water surface
maker = CardMaker('water')
maker.setFrame(x1, x2, y1, y2)
self.waterNP = render.attachNewNode(maker.generate())
self.waterNP.setHpr(0, -90, 0)
self.waterNP.setPos(0, 0, z)
self.waterNP.setTransparency(TransparencyAttrib.MAlpha)
self.waterNP.setShader(loader.loadShader('shaders/water.sha'))
self.waterNP.setShaderInput('wateranim',
Vec4(0.03, -0.015, 64.0,
0)) # vx, vy, scale, skip
# offset, strength, refraction factor (0=perfect mirror, 1=total refraction), refractivity
self.waterNP.setShaderInput('waterdistort', Vec4(0.4, 4.0, 0.25, 0.45))
self.waterNP.setShaderInput('time', 0)
# Reflection plane
self.waterPlane = Plane(Vec3(0, 0, z + 1), Point3(0, 0, z))
planeNode = PlaneNode('waterPlane')
planeNode.setPlane(self.waterPlane)
# Buffer and reflection camera
buffer = base.win.makeTextureBuffer('waterBuffer', 512, 512)
buffer.setClearColor(Vec4(0, 0, 0, 1))
cfa = CullFaceAttrib.makeReverse()
rs = RenderState.make(cfa)
self.watercamNP = base.makeCamera(buffer)
self.watercamNP.reparentTo(render)
#sa = ShaderAttrib.make()
#sa = sa.setShader(loader.loadShader('shaders/splut3Clipped.sha') )
cam = self.watercamNP.node()
cam.getLens().setFov(base.camLens.getFov())
cam.getLens().setNear(1)
cam.getLens().setFar(5000)
cam.setInitialState(rs)
cam.setTagStateKey('Clipped')
#cam.setTagState('True', RenderState.make(sa))
# ---- water textures ---------------------------------------------
# reflection texture, created in realtime by the 'water camera'
tex0 = buffer.getTexture()
tex0.setWrapU(Texture.WMClamp)
tex0.setWrapV(Texture.WMClamp)
ts0 = TextureStage('reflection')
self.waterNP.setTexture(ts0, tex0)
# distortion texture
tex1 = loader.loadTexture('textures/water.png')
ts1 = TextureStage('distortion')
self.waterNP.setTexture(ts1, tex1)
# ---- Fog --- broken
min = Point3(x1, y1, -999.0)
max = Point3(x2, y2, z)
boundry = BoundingBox(min, max)
self.waterFog = Fog('waterFog')
self.waterFog.setBounds(boundry)
colour = (0.2, 0.5, 0.8)
self.waterFog.setColor(*colour)
self.waterFog.setExpDensity(0.05)
render.attachNewNode(self.waterFog)
#render.setFog(world.waterFog)
taskMgr.add(self.update, "waterTask")