def plot_volume(in_dict, time_array, route, o_dir, case_name):
#----parameters----#
Ro = readf.get_variable(in_dict, 'radius', 'float')
Kappa = readf.get_variable(in_dict, 'thermdiff', 'float')
year = 365 * 24 * 3600
time_scaling = pow(Ro, 2.0) / Kappa / (1e6 * year)
melt_scaling = pow(Ro, 3.0) / 1e9
v_file = '%s/%s.volume.dat' % (route, case_name)
if os.path.isfile(v_file) is False:
print('no file %s' % (v_file))
return
#----read data----#
v_data, v_steps = readf.read_q_file(v_file, time_array, 6)
v_time = v_data[:, 0] * time_scaling
v_T = v_data[:, 1]
v_melt = v_data[:, 5] * melt_scaling
#print(v_time) #debug
#print(v_T) #debug
#----plot figures----#
case_dir = Mpf.assign_output_dir("%s/%s" % (o_dir, case_name))
o_dir = Mpf.assign_output_dir("%s/vol" % (case_dir))
fig, ax = plt.subplots()
ax = plt.subplot(2, 1, 1)
plt.plot(v_time, v_T, 'r-')
ax.set(ylabel='Temperature[1.0]')
ax = plt.subplot(2, 1, 2)
plt.plot(v_time, v_melt, 'c-')
ax.set(xlabel='Time [ma]', ylabel='Total melt volume [km^3]')
fig.savefig("%s/volume_value.eps" % (o_dir))
plt.close(fig)
def heat_flux(in_dict, time_array, step_tuple, route, o_dir, case_name,
**kwargs):
def _config(name, default):
try:
return kwargs[name]
except KeyError:
return default
year = 365 * 24 * 3600
write_q = readf.get_variable(in_dict, 'write_q_files', 'int')
Kappa = readf.get_variable(in_dict, 'thermdiff', 'float')
Cp = readf.get_variable(in_dict, 'cp', 'float')
Rho = readf.get_variable(in_dict, 'density', 'float')
Tref = readf.get_variable(in_dict, 'reftemperature', 'float')
Tsurf = readf.get_variable(in_dict, 'surftemperature', 'float')
Ro = readf.get_variable(in_dict, 'radius', 'float')
case_dir = Mpf.assign_output_dir("%s/%s" % (o_dir, case_name))
o_dir = Mpf.assign_output_dir("%s/heat_flux" % (case_dir))
Therm_k = Kappa * Cp * Rho
time_scaling = pow(Ro, 2.0) / Kappa / (1e6 * year)
hq_scaling = Therm_k * Tref / Ro * 1e3
#----read data----#
q_file = "%s/%s.qb.dat" % (route, case_name)
cols = _config('cols', 5)
q_data, q_steps = readf.read_q_file(q_file, time_array, cols)
#for i in q_data[:,0]:
# print(i)#debug
#print(q_steps) #debug
colt = _config('colt', 0)
colq = _config('colq', 1)
colT = _config('colT', 3)
print(q_data.size)
q_time = q_data[:, 0] * time_scaling
#print(q_data[:,0]) #debug
q_hq = q_data[:, 1] * hq_scaling
if colT is not None:
Tc = q_data[:, 3] * Tref + Tsurf
else:
Tc = Tref * np.ones(q_time.size) + Tsurf
B, qad = magnetism_intensiy(in_dict, q_hq / 1e3, Tc)
qad = qad * 1e3
B = B * 1e6
#----plot figures----#
fig, ax = plt.subplots()
ax = plt.subplot(2, 1, 1)
#fig, ax = plt.subplots()
plt.plot(q_time, q_hq, 'r-')
ax.set(ylabel='Heat Flux[mw/m3]')
ax = plt.subplot(2, 1, 2)
#fig, ax = plt.subplots(212)
plt.plot(q_time, B, 'b-')
ax.set(xlabel='Time [ma]', ylabel='Magnetism [/muT]')
#plt.show()
fig.savefig("%s/cmb_heatflux.eps" % (o_dir))
plt.close(fig)
def plot_volume_1(in_dict, time_array, route, o_dir, case_name, settings):
#----parameters----#
column_dict = settings['column']
color_dict = settings['color']
Ro = readf.get_variable(in_dict, 'radius', 'float')
Kappa = readf.get_variable(in_dict, 'thermdiff', 'float')
year = 365 * 24 * 3600
time_scaling = pow(Ro, 2.0) / Kappa / (1e6 * year)
melt_scaling = pow(Ro, 3.0) / 1e9
v_file = '%s/%s.volume.dat' % (route, case_name)
if os.path.isfile(v_file) is False:
print('no file %s' % (v_file))
return
data = readf.read_data_1(v_file)
temp = column_dict['step']
step_array = data[:, temp]
xdata = np.zeros(step_array.shape)
for n in range(step_array.size):
step = int(step_array[n])
xdata[n] = time_array[step] * time_scaling
#----plot figures----#
case_dir = Mpf.assign_output_dir("%s/%s" % (o_dir, case_name))
o_dir = Mpf.assign_output_dir("%s/vol" % (case_dir))
fig, ax = plt.subplots()
#----temperature----#
ax = plt.subplot(2, 1, 1)
temp = column_dict['temp']
ydata = data[:, temp]
color_type = color_dict['temp']
plt.plot(xdata, ydata, color=color_type, linestyle='-', label='average T')
ax.legend()
ax.set(ylabel='Temperature[1.0]')
#----melting----#
ax = plt.subplot(2, 1, 2)
temp = column_dict['melting'][0]
color_type = color_dict['melting'][0]
n_c = len(column_dict['melting']) - 1
ydata = data[:, temp] * melt_scaling
plt.plot(xdata, ydata, color=color_type, linestyle='-', label='total')
for n in range(n_c):
name = 'chemical %d' % (n)
temp = column_dict['melting'][n + 1]
ydata = data[:, temp] * melt_scaling
color_type = color_dict['melting'][n + 1]
plt.plot(xdata, ydata, color=color_type, linestyle='--', label=name)
ax.legend()
ax.set(xlabel='Time [ma]', ylabel='Total melt volume [km^3]')
fig.savefig("%s/volume_value.eps" % (o_dir))
plt.close(fig)
def plot_mf_melting(in_dict, time_array, route, o_dir, case_name, settings):
#----parameters----#
column_dict = settings['column']
color_dict = settings['color']
Ro = readf.get_variable(in_dict, 'radius', 'float')
Kappa = readf.get_variable(in_dict, 'thermdiff', 'float')
year = 365 * 24 * 3600
time_scaling = pow(Ro, 2.0) / Kappa / year
filename = '%s/%s.mf.dat' % (route, case_name)
if os.path.isfile(filename) is False:
print('no file %s' % (filename))
return
data = np.genfromtxt(filename)
temp = column_dict['step']
step_array = data[:, temp]
temp = column_dict['eular']
eu_rate = data[:, temp]
temp = column_dict['tracer']
csize = len(temp) - 1
tr_rate = data[:, temp[0]]
tr_rate_comp = np.zeros((tr_rate.size, csize))
for i in range(csize):
tr_rate_comp[:, i] = data[:, temp[i + 1]]
eu = np.zeros(step_array.size)
tr = np.zeros(step_array.size)
tr_comp = np.zeros((step_array.size, csize))
time = np.zeros(step_array.size)
dtime = np.zeros(step_array.size)
for n in range(step_array.size):
step = int(step_array[n])
time[n] = time_array[step] * time_scaling
if n > 0:
dtime = time[n] - time[n - 1]
eu[n] = eu[n - 1] + eu_rate[n - 1] * dtime
tr[n] = tr[n - 1] + tr_rate[n - 1] * dtime
tr_comp[n, :] = tr_comp[n - 1, :] + tr_rate_comp[n - 1, :] * dtime
#----plot figures----#
case_dir = Mpf.assign_output_dir("%s/%s" % (o_dir, case_name))
o_dir = Mpf.assign_output_dir("%s/melting" % (case_dir))
fig, ax = plt.subplots()
#----temperature----#
ax = plt.subplot(2, 1, 1)
color_type = color_dict['tracer']
plt.plot(time / 1e6,
tr_rate,
color=color_type,
linestyle='--',
label='Tracer Method')
color_type = color_dict['eular']
plt.plot(time / 1e6,
eu_rate,
color=color_type,
linestyle='--',
label='Eular Method')
color_type = color_dict['melting']
for i in range(csize):
plt.plot(time / 1e6,
tr_rate_comp[:, i],
color=color_type[i + 1],
linestyle='-',
label='comp%d' % (i))
ax.set(ylabel='Melting Producting Rate [km^3/yr]')
ax = plt.subplot(2, 1, 2)
color_type = color_dict['tracer']
plt.plot(time / 1e6,
tr,
color=color_type,
linestyle='--',
label='Tracer Method')
color_type = color_dict['eular']
plt.plot(time / 1e6,
eu,
color=color_type,
linestyle='--',
label='Eular Method')
color_type = color_dict['melting']
for i in range(csize):
plt.plot(time / 1e6,
tr_comp[:, i],
color=color_type[i + 1],
linestyle='-',
label='comp%d' % (i))
ax.legend()
ax.set(ylabel='Melting Volume[km^3/yr]')
ax.set(xlabel='time [ma]')
fig.tight_layout()
fig.savefig("%s/mml_melting.eps" % (o_dir))
def surf_plot(in_dict, route, o_dir, case_name, step, **kwargs):
def _config(name, default):
try:
return kwargs[name]
except KeyError:
return default
gmt_dir = _config('gmt_dir', './gmt')
rot = _config('rot', None)
angle = _config('angle', [0.0, 0.0])
vtype = _config('vtype', 'total')
cpt = _config('cpt', None)
check_bound = _config('check_bound', False)
cc_file = './cc'
gravacc = readf.get_variable(in_dict, 'gravacc', 'float')
Rho = readf.get_variable(in_dict, 'density', 'float')
Ro = readf.get_variable(in_dict, 'radius', 'float')
Eta = readf.get_variable(in_dict, 'refvisc', 'float')
Kappa = readf.get_variable(in_dict, 'thermdiff', 'float')
if vtype is 'total':
deg = -1
case_dir = Mpf.assign_output_dir("%s/%s" % (o_dir, case_name))
surf_dir = Mpf.assign_output_dir("%s/surf" % (case_dir))
file0 = '%s/%s.surf0.%d' % (cc_file, case_name, step)
if rot is None:
ofile = '%s/topo_%d_%d.ps' % (surf_dir, step, deg)
file1 = '%s/%s_%d_surf_combine' % (cc_file, case_name, step)
else:
ofile = '%s/topo_%d_%drt%d_%d_%d_%d.ps' % (surf_dir, step, deg, rot[0],
rot[1], angle[0], angle[1])
file1 = '%s/%s_%d_surf_combine_rt%d_%d_%d_%d' % (
cc_file, case_name, step, rot[0], rot[1], angle[0], angle[1])
scl_ang = 180.0 / np.pi
if deg is -1:
col = 2
else:
col = deg + 2
scl_topo = Eta * Kappa / Ro**2.0 / (Rho * gravacc)
topo_minor = 200
sminor = 500
smini = 100
#----combine surf output----#
if not os.path.isfile(file1):
readf.write_surf_runfile(in_dict,
route,
case_name,
step,
vtype='total')
bashcommand = []
bashcommand.append('%s/images.x %s/runfile' % (cc_file, cc_file))
if rot is not None:
bashcommand.append(
'./lib/eula_polar %s %s %s %s %s %s' %
(file0, file1, rot[0], rot[1], angle[0], angle[1]))
readf.run_bash(bashcommand)
if rot is None:
os.rename(file0, file1)
#----read head value---#
with open(file1) as fin:
sdata = fin.readline().split()
data = []
for s in sdata:
data.append(float(s) * scl_topo)
try:
bound = kwargs['bound'] #enlist bound in kwargs to creat a liste
topomm = [bound[0], bound[1]] #that stands for boundary value for
off_topo = bound[2] #dynamic topography
except KeyError: #else take from input
idat = input('(min,max,offset),reference:(%.4e %.4e %.4e)\n' %
(data[0], data[1], data[2]))
idat = idat.split(',')
topomm = []
topomm.append(float(idat[0]))
topomm.append(float(idat[1]))
off_topo = float(idat[2])
if data[0] < topomm[0] or data[1] > topomm[1]:
print(
"at step %s, default value for bound is (%.4e %.4e), given is %.4e %.4e"
% (step, data[0], data[1], topomm[0], topomm[1]))
if check_bound:
return data
try:
minor = kwargs['minor'] #enlist minor in kwargs to creat a list that
topo_minor = minor[0] #stand for interval in color bar, interval of
sminor = minor[1] #scale
smini = minor[2]
except KeyError:
isdo = input('change (topo_minor,sminor,smini) value,default is\
(%.4e %.4e,%.4e),y/n\n' % (topo_minor, sminor, smini))
if isdo is 'y':
nval = input('new value:')
nval = nval.split(',')
topo_minor = float(nval[0])
sminor = float(nval[1])
smini = float(nval[2])
#----plot figure using gmt----#
bashcommand = []
bashcommand.append(
'gmt nearneighbor -i1[s%.2f],0[s%.2f][o90],%d[s%.2f][o%.2f] -R0/360/-90/90 -I1/1 -S10 -N1 -G%s/topo.grd -V -h1 %s'
% (scl_ang, -scl_ang, col, scl_topo, off_topo, gmt_dir, file1))
if cpt is None:
cpt = '%s/color.cpt' % (gmt_dir)
bashcommand.append(
'gmt makecpt -Cno_green -T%.2f/%.2f/%.2f > %s/color.cpt' %
(topomm[0], topomm[1], topo_minor, gmt_dir))
else:
cpt = '%s/%s' % (gmt_dir, cpt)
bashcommand.append(
'gmt grdimage %s/topo.grd -R0/360/-90/90 -C%s -JW90/6i -X0.35i -Y6.0i -B120g30/60g30 -K -P > %s'
% (gmt_dir, cpt, ofile))
bashcommand.append(
'gmt psscale -D3.5i/-0.5i/15.0c/0.5ch -C%s -P -O -U -V -B:Topography/m:%.2ff%.2fWSne >> %s'
% (cpt, sminor, smini, ofile))
bashcommand.append('gmt psconvert -A -Tj %s' % ofile)
readf.run_bash(bashcommand)
def sph_plot(in_dict, rr, route, o_dir, case_name, pp_file, step, vtype='T'):
print('plot sph expansion figures, step %d\n' % step)
color_mini = 0.05
r_minor = 4.0
r_mini = 2.0
gmt_dir = Mpf.assign_output_dir("./gmt")
file_out = ('%s/%s.field.%d.dat' % (gmt_dir, case_name, step))
case_dir = Mpf.assign_output_dir("%s/%s" % (o_dir, case_name))
field_dir = Mpf.assign_output_dir('%s/field' % (case_dir))
radius = readf.get_variable(in_dict, 'radius', 'float')
rin = readf.get_variable(in_dict, 'radius_inner', 'float')
nprocz = readf.get_variable(in_dict, 'nprocz', 'int')
noz = readf.get_variable(in_dict, 'nodez', 'int')
ll_max = readf.get_variable(in_dict, 'output_ll_max', 'int')
ofile = '%s/%s_field_%s_%d.ps' % (field_dir, case_name, vtype, step)
ofile1 = '%s/%s_field_%s_%dl.eps' % (field_dir, case_name, vtype, step)
lnoz = int((noz - 1) / nprocz) + 1
nn_max = int((ll_max + 1) * (ll_max + 2) / 2)
boundary = np.zeros(noz)
boundary[0] = 1
boundary[noz - 1] = 1
#----read in data from .field output----#
data = readf.read_field(route, case_name, nprocz, noz, ll_max, step)
#----output file for gmt plot----#
sph_max = np.zeros(noz)
fout = open(file_out, 'w')
for nz in range(noz):
temp = data[nz, 1:ll_max + 1]
ll0 = np.argmax(temp) + 1
if boundary[nz]:
sph_max[nz] = 0.0
temp = temp * 0.0
else:
sph_max[nz] = temp[ll0 - 1]
temp = temp / sph_max[nz]
for ll in range(1, ll_max + 1):
fout.write('%.4e %d %.4e\n' % (rr[nz], ll, temp[ll - 1]))
fout.close()
#----plot spectrum output with gmt----#
ro = radius / 1e5
ri = radius * rin / 1e5
fig, ax = plt.subplots()
plt.plot(sph_max, rr * ro, 'b-')
ax.set(xlabel='Amplitude [1.0]', ylabel='Radius [100km]')
plt.xlim(0.0, )
plt.ylim(ri, ro)
#plt.show()
fig.savefig(ofile1)
plt.close(fig)
bashcommand = []
bashcommand.append(
'gmt nearneighbor -i1,0[s%.1f],2 -R1/%d/%.1f/%.1f -I1.0/0.3 -S1 -N1 -G%s/result.grd -V %s'
% (ro, ll_max, ri, ro, gmt_dir, file_out))
bashcommand.append('gmt makecpt -Cno_green -T0/1/%.3f > %s/color.cpt' %
(color_mini, gmt_dir))
bashcommand.append(
'gmt grdimage %s/result.grd -R1/%d/%.1f/%.1f/ -C%s/color.cpt -JX6i/3i -X1.0i -Y2.0i -Ba5f1:Degree:/a%.1ff%.1f:Radius/100km:WSen -P -K > %s'
% (gmt_dir, ll_max, ri, ro, gmt_dir, r_minor, r_mini, ofile))
bashcommand.append(
'gmt psscale -D3.5i/-0.75i/15.0c/0.5ch -C%s/color.cpt -P -O -U -V -B:Power:0.1f0.1WSne >> %s'
% (gmt_dir, ofile))
bashcommand.append('gmt psconvert -A -Tj %s' % ofile)
# bashcommand.append('gmt psconvert -A -Tf %s'%ofile)
ofile2 = '%s/%s_field_%s_%d.jpg' % (field_dir, case_name, vtype, step)
ofile3 = '%s/%s_field_%s_%dl.png' % (field_dir, case_name, vtype, step)
bashcommand.append('convert %s -resize x1368 %s' % (ofile1, ofile3))
bashcommand.append('convert %s %s +append %s' % (ofile2, ofile3, ofile2))
#print(bashcommand) #debug
#input()
readf.run_bash(bashcommand)
#os.remove(ofile1)
os.remove(ofile3)
def sph_expansion(in_dict, time_array, o_dir, case_name, pp_file):
case_dir = Mpf.assign_output_dir("%s/%s" % (o_dir, case_name))
o_dir = Mpf.assign_output_dir("%s/field" % (case_dir))
ep_steps
for step in ep_steps:
sph_plot(in_dict, rr, route, o_dir, case_name, pp_file, step)
def chemical(in_dict, time_array, step_tuple, column_dict, route, o_dir,
case_name, pp_file):
get_end = 1
split = 6
init_lower_percent = 0.01
pi = np.pi
tiny = 1e-8
year = 365 * 24 * 3600
case_dir = Mpf.assign_output_dir("%s/%s" % (o_dir, case_name))
o_dir = Mpf.assign_output_dir("%s/chemical" % (case_dir))
if os.path.isfile(pp_file):
pp_dict = readf.read_input(pp_file)
try:
pp_dict['end_time']
except KeyError:
get_end = 1
else:
get_end = 0
else:
get_end = 1
#----read parameters----#
cols = column_dict['cols']
nprocz = readf.get_variable(in_dict, 'nprocz', 'int')
noz = readf.get_variable(in_dict, 'nodez', 'int')
Ro = readf.get_variable(in_dict, 'radius', 'float')
interface = readf.get_variable(in_dict, 'z_interface', 'float_list')
r_inter = interface[-1]
r_o = readf.get_variable(in_dict, 'radius_outer', 'float')
r_in = readf.get_variable(in_dict, 'radius_inner', 'float')
r_lith = r_o - readf.get_variable(in_dict, 'z_lith', 'float')
Kappa = readf.get_variable(in_dict, 'thermdiff', 'float')
r_half = (r_o + r_in) / 2.0
lnoz = int((noz - 1) / nprocz) + 1
time_scaling = pow(Ro, 2.0) / Kappa / (1e6 * year)
total_ibc = 4 * pi / 3 * (pow(r_lith, 3.0) - pow(r_lith - 20e3 / Ro, 3.0))
#----prepare chemical data----#
chemical = np.zeros((len(step_tuple), 3))
time1 = np.zeros(len(step_tuple))
n = 0
for step in step_tuple:
time1[n] = time_array[step]
print(step, end='\r')
data_in = readf.read_horig_output(route, case_name, step, nprocz, lnoz,
cols)
rr = data_in[:, column_dict['radius']]
C = data_in[:, column_dict['ic']]
for i in range(noz - 1):
volume = 4.0 / 3.0 * pi * (pow(rr[i + 1], 3.0) - pow(rr[i], 3.0))
if rr[i] > r_inter - tiny and rr[i] < r_lith + tiny:
chemical[n,
0] = chemical[n, 0] + (C[i] + C[i + 1]) / 2.0 * volume
if rr[i] > r_half - tiny:
chemical[n,
1] = chemical[n, 1] + (C[i] + C[i + 1]) / 2.0 * volume
if rr[i] < r_half + tiny:
chemical[n,
2] = chemical[n, 2] + (C[i] + C[i + 1]) / 2.0 * volume
n = n + 1
total_chemical = chemical[0, 1] + chemical[0, 2]
chemical_low = chemical[:, 2] #chemical_low is lower chemical percent
#print(chemical[0,1]+chemical[0,2])
#print(chemical[:,0]) #debug
#print(chemical[:,1])
#print(chemical[:,2])
#----plot figures----#
#----figure 1 : retained chemical----#
fig, ax = plt.subplots()
line1, = ax.plot(time1 * time_scaling, chemical[:, 0] / chemical[0, 0],
'r-')
ax.set(xlabel='Time [ma]',
ylabel='Chemical Percent[1]',
title='Retained Chemicals in Initial Layer')
fig.savefig("%s/retained_ibc.eps" % (o_dir))
#plt.show()
plt.close(fig)
#----figure 2 : overturned chemical----#
time2 = time1 * time_scaling
fig, ax = plt.subplots()
line1, = ax.plot(time2, chemical_low / total_chemical, 'b-')
ax.set(xlabel='Time [ma]',
ylabel='Chemical Percent[1]',
title='Overturned Chemical')
fig.savefig("%s/overturned_chemical.eps" % (o_dir))
#plt.show()
plt.close(fig)
#----figure 3 : overturned ibc volume----#
fig, ax = plt.subplots()
line1, = ax.plot(time2, chemical_low / total_chemical * total_ibc, 'c-')
ax.set(xlabel='Time [ma]', ylabel='IBC Volume[1]', title='Overturned IBC')
fig.savefig("%s/overturned_IBC.eps" % (o_dir))
if get_end is 1:
temp = input(
"input scheme to continue getting end for overturn: 'a(auto)/m(manual):"
)
if temp is 'a':
cid = fig.canvas.mpl_connect('button_press_event', on_press)
plt.show()
end_time = get_end_time(Gmc[0], Gmc[1], Gmc[2])
diff_t = abs(time2 - end_time)
end_n = np.argmin(diff_t)
end_c = chemical_low[end_n]
episode_c = np.linspace(0.0, 1.0, split) * end_c
episode_c[0] = init_lower_percent * end_c
episode_steps = []
for cc in episode_c:
diff_c = abs(chemical_low - cc)
tempn = np.argmin(diff_c)
episode_steps.append(step_tuple[tempn])
end_c_percent = end_c / total_chemical
episode_completness = episode_c / end_c
fig.canvas.mpl_disconnect(cid)
elif temp is 'm':
plt.show()
temp = input('endstep for episode:')
end_step = int(temp)
end_time = time_array[end_step] * time_scaling
diff_t = abs(time2 - end_time)
end_n = np.argmin(diff_t)
episode_t = np.linspace(0.0, 1.0, split) * end_time
end_c = chemical_low[end_n]
end_c_percent = end_c / total_chemical
episode_completness = episode_t / end_time
episode_steps = []
for tt in episode_t:
diff_t = abs(time2 - tt)
tempn = np.argmin(diff_t)
episode_steps.append(step_tuple[tempn])
readf.write_to_file(pp_file, 'end_time', end_time, 'float')
readf.write_to_file(pp_file, 'end_c_percent', end_c_percent, 'float')
readf.write_to_file(pp_file, 'episode_completness',
episode_completness, 'float', 'array')
readf.write_to_file(pp_file, 'episode_steps', episode_steps, 'int',
'array')
else:
plt.show()
plt.close(fig)
def horiz_avg_1(in_dict, time_array, step_tuple, column_dict, route, o_dir,
case_name):
#plot horizontal_averagye result, no chemical
nprocz = readf.get_variable(in_dict, 'nprocz', 'int')
noz = readf.get_variable(in_dict, 'nodez', 'int')
Ra = readf.get_variable(in_dict, 'rayleigh', 'float')
Buoy = readf.get_variable(in_dict, 'buoyancy_ratio', 'float_list')
Alpha = readf.get_variable(in_dict, 'thermexp', 'float')
Tref = readf.get_variable(in_dict, 'reftemperature', 'float')
Tsurf = readf.get_variable(in_dict, 'surftemperature', 'float')
Rho = readf.get_variable(in_dict, 'density', 'float')
Eta = readf.get_variable(in_dict, 'refvisc', 'float')
Ro = readf.get_variable(in_dict, 'radius', 'float')
Kappa = readf.get_variable(in_dict, 'thermdiff', 'float')
lnoz = int((noz - 1) / nprocz) + 1
cols = column_dict['cols']
n_c = len(column_dict['chemical'])
#----derive scalings----#
year = 365 * 24 * 3600
r_scaling = Ro / 1e3
time_scaling = pow(Ro, 2.0) / Kappa / (1e6 * year)
velo_scaling = Kappa / Ro * year * 1e2
#---output informations---#
case_dir = Mpf.assign_output_dir("%s/%s" % (o_dir, case_name))
temp_dir = Mpf.assign_output_dir("%s/temp" % (case_dir))
velo_dir = Mpf.assign_output_dir("%s/velo" % (case_dir))
visc_dir = Mpf.assign_output_dir("%s/visc" % (case_dir))
for step in step_tuple:
print(step, end='\r')
data_in = readf.read_horig_output(route, case_name, step, nprocz, lnoz,
cols)
time = time_array[step] * time_scaling
##----plot figures----#
col_r = column_dict['radius']
ydata = data_in[:, col_r]
settings = {
'name': 'temp',
'x_unit': '1',
'y_unit': '1',
'o_dir': temp_dir,
'plot_type': 'n',
'color': 'r',
'mark': '.'
}
col_t = column_dict['temp']
xdata = data_in[:, col_t]
Mpf.plot_horiz_avg(xdata, ydata, step, time, settings)
settings = {
'name': 'visc',
'x_unit': '1',
'y_unit': '1',
'o_dir': visc_dir,
'plot_type': 'l',
'color': 'b',
'mark': '.'
}
col_v = column_dict['visc']
xdata = data_in[:, col_v]
Mpf.plot_horiz_avg(xdata, ydata, step, time, settings)
settings = {
'name': ['velo', 'vr', 'vth'],
'x_unit': 'cm/yr',
'y_unit': '1.0',
'o_dir': velo_dir,
'plot_type': 'n',
'color': ('c', 'g'),
'mark': '.'
}
xdata = np.zeros((noz, 2))
col_vr = column_dict['vr']
col_vth = column_dict['vth']
xdata[:, 0] = data_in[:, col_vr]
xdata[:, 1] = data_in[:, col_vth]
Mpf.plot_horiz_avg(xdata, ydata, step, time, settings)
def plot_combine(in_dict, oroute, cname, dfile, tp, cdict, tval, **kwarg):
def _config(name, default):
try:
return kwarg[name]
except KeyError:
return default
dcwd = './gmt'
Ro = readf.get_variable(in_dict, 'radius', 'float')
Kappa = readf.get_variable(in_dict, 'thermdiff', 'float')
ri = readf.get_variable(in_dict, 'radius_inner', 'float')
Buoy = readf.get_variable(in_dict, 'buoyancy_ratio', 'float')
Alpha = readf.get_variable(in_dict, 'thermexp', 'float')
year = 365 * 24 * 3600
Time = Ro**2.0 / Kappa / (1e6 * year)
R = Ro / 1e5
Temp = readf.get_variable(in_dict, 'reftemperature', 'float')
Toff = readf.get_variable(in_dict, 'surftemperature', 'float')
Tab = 273.15
Toff = Toff - Tab
Rho = readf.get_variable(in_dict, 'density', 'float')
Drho = Buoy * Alpha * Temp * Rho
tmin = tval[0]
tmax = tval[1]
tminor = tval[2]
tmini = tval[3]
rmin = R * ri
rmax = R
odir0 = Mpf.assign_output_dir('%s/%s' % (oroute, cname))
odir = Mpf.assign_output_dir('%s/combine' % (odir0))
ofile = '%s/combine_%s_%.0f_%.0f.ps' % (odir, tp, tmin, tmax)
if tp is 'rho':
Dat = Drho
Doff = Rho
dmin = Rho
dmax = Rho + Drho
dminor = _config('rhodminor', 5.0)
coff = _config('rhocoff', 50.0)
elif tp is 'temp':
Dat = Temp
Doff = Toff
dmin = Toff
dmax = Toff + Temp
dminor = 50.0
coff = 500.0
t = cdict['time']
r = cdict['radius']
dat = cdict[tp]
abash = []
abash.append(
'gmt nearneighbor -i%d[s%.4f],%d[s%.4f],%d[s%.4fo%.4f] -R%.4f/%.4f/%.4f/%.4f -I0.1/0.1 -S30 -N1 -Gresult.grd -V %s'
% (t, Time, r, R, dat, Dat, Doff, tmin, tmax, rmin, rmax, dfile))
cpt = _config('cpt', None)
if cpt is None:
abash.append('gmt makecpt -Cno_green -T%.4f/%.4f/%.4f > color.cpt' %
(dmin, dmax, dminor))
cfile = 'color.cpt'
else:
cfile = cpt
abash.append(
'gmt grdimage result.grd -R%.4f/%.4f/%.4f/%.4f -C%s -JX4i/4i -Ba%.4ff%.4f:Time/Ma:/a4.0f2.0:Radius/100km:WSen -K -P > %s'
% (tmin, tmax, rmin, rmax, cfile, tminor, tmini, ofile))
abash.append(
'gmt psscale -C%s -D4.4i/2.0i/4.0i/0.2i -P -O -V -B%.4f >> %s' %
(cfile, coff, ofile))
abash.append('gmt psconvert -A -Tj %s' % ofile)
print(abash) #debug
readf.run_bash(abash, dcwd)