def __init__(self,
name: str = "NoRecipeNameSet",
description: str = "NoRecipeDescriptionSet",
dateCreated: str = "NoDateSet",
axes: axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(),
seqList=None,
__verbose__: bool = 0,
**kwargs):
"""*Initializes recipe object*.
Parameters
----------
name: String
description: String
dateCreated: String
path: Path
axes: axes3DSpec
tool: toolSpec
seqList: list
__verbose__: bool
"""
# Pass in active axes/tool, other params
if seqList is None:
seqList = []
self.dateCreated = dateCreated
self.description = description
self.name = name
self.axes = axes
self.tool = tool
self.__verbose__ = __verbose__
self.seqList = seqList
self.cmdList = [] # For storing generated commands
super().__init__(**kwargs)
def __init__(self,
axes: Axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(),
**kwargs):
"""Initializes sensorElectrode object.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Create Params dict
self.dictParams = {
"name":
seqParam("Sequence Name", "sensorElectrode", "", ""),
"description":
seqParam(
"Sequence Description", "Electrode with interleaving fingers, "
"constant channel length, long axis = "
"X", "", "sensorElectrode.py"),
"creationDate":
seqParam("Creation Date", "21/01/2021", "", "dd/mm/yyyy"),
"createdBy":
seqParam("Created By", "Bijal Patel", "", ""),
"owner":
seqParam("Owner", "PCP_Electronics", "", ""),
"printSpd":
seqParam("Printing Speed", "60", "mm/min", ""),
"trvlSpd":
seqParam("Travel Speed", "200", "mm/min", ""),
"linewidth":
seqParam("linewidth", "0.7", "mm", "Width of each printed line"),
"leadIns":
seqParam("lead-ins", "3", "mm", "Length of lead-in electrodes"),
"xOverlap":
seqParam("x-overlap", "1.230", "mm",
"x-length of overlap between 'fingers'"),
"channlength":
seqParam("channellength", "0.5", "mm",
"Distance between electrode 'fingers'"),
"Z-hop height":
seqParam("Z-hop", "1", "", "Height to raise Z-axis during travel "
"moves"),
"toolOnVal":
seqParam("Tool ON Value", "100", tool.units,
"Depends on tool loaded"),
"toolTrvlVal":
seqParam("Tool Travel Value", "0", tool.units,
"Depends on tool loaded"),
"toolOffVal":
seqParam("Tool OFF Value", "0", tool.units,
"Depends on tool loaded"),
"cleanSteps":
seqParam("cleanSteps", "F", "T/F",
"Allow nozzle cleaning between strokes?")
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self, axes: Axes3DSpec = nullAxes(), tool: toolSpec = nullTool(), **kwargs):
"""*Initializes cuboid object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Create Params dict
self.dictParams = {
"name": seqParam("name", "cuboid", "",
"Change if modifying from default"),
"description": seqParam("Sequence Description",
"3D Cuboid with base along the XY axes", "", ""),
"creationDate": seqParam("Creation Date",
"16/11/2019", "", "dd/mm/yyyy"),
"createdBy": seqParam("Created By", "Yilong Chang", "", ""),
"owner": seqParam("Owner", "PCP_3DGeometries", "", "default: PCP_Core"),
"printSpd": seqParam("Printing Speed", "60", "", ""),
"width": seqParam("Width", "10", "mm", "in y direction"),
"length": seqParam("Length", "20", "mm", "in x direction"),
"height": seqParam("Height", "5", "mm", "in z direction"),
"step": seqParam("layer height", "0.5", "mm", "the amount nozzle moves up after each layer"),
"toolOnVal": seqParam("Tool ON Value", "100", tool.units,
"Depends on tool loaded"),
"toolOffVal": seqParam("Tool OFF Value", "000", tool.units,
"Depends on tool loaded")}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self, axes: Axes3DSpec = nullAxes(), tool: toolSpec = nullTool(), **kwargs):
"""*Initializes setToolState object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Create Params dict
self.dictParams = {
"name": seqParam("name", "setToolState", "", ""),
"description": seqParam("Sequence Description",
"Set Tool Value or Dispense State", "", "setToolState.py"),
"creationDate": seqParam("Creation Date",
"05/05/2020", "", "dd/mm/yyyy"),
"createdBy": seqParam("Created By", "Bijal Patel", "", ""),
"owner": seqParam("Owner", "PCP_Fundamentals", "", ""),
"dispenseState": seqParam("dispenseState", "NoChange", "On/Off/NoChange",
"Engage/Disengage/No Change"),
"newVal": seqParam("newVal", "NoChange", "New value to set: Number or NoChange",
"New Tool Value to Set"),
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self, axes: axes3DSpec = nullAxes(), tool: toolSpec = nullTool(), **kwargs):
"""*Initializes basicMove object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Create Params dict
self.dictParams = {
"name": seqParam("name", "basicMove", "",
"Change if modifying from default"),
"description": seqParam("Sequence Description",
"Move Axes (relative or abs)", "", "basicMove.py"),
"creationDate": seqParam("Creation Date",
"05/05/2020", "", "dd/mm/yyyy"),
"createdBy": seqParam("Created By", "Bijal Patel", "", ""),
"owner": seqParam("Owner", "PCP_Fundamentals", "", "default: PCP_Core"),
"posMode": seqParam("Positioning Mode", "relative", "absolute/relative",
"Versus current position or absolute origin"),
"feedRate": seqParam("Axes Speed", "60", "mm/min", ""),
"xMove": seqParam("X movement", "5", "mm",
"distance/location to move in X"),
"yMove": seqParam("Y movement", "5", "mm",
"distance/location to move in Y"),
"zMove": seqParam("Z movement", "5", "mm",
"distance/location to move in Z"),
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self, axes: Axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(), **kwargs):
"""*Initializes pause object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Create Params dict
self.dictParams = {
"name": seqParam("name", "pause", "",
""),
"description": seqParam("Sequence Description",
"Pause execution for a set duration, "
"or until user confirms",
"", "pause.py"),
"creationDate": seqParam("Creation Date",
"05/05/2020", "", "dd/mm/yyyy"),
"createdBy": seqParam("Created By", "Bijal Patel", "", ""),
"owner": seqParam("Owner", "PCP_Fundamentals", "", ""),
"pauseTime": seqParam("pauseTime", "1", "seconds",
"time to wait before next cmd sent"),
"doPrompt": seqParam("Prompt to Continue?", "N", "(Y/N)",
"Will user be prompted to resume?")
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self, axes: Axes3DSpec = nullAxes(), tool: toolSpec = nullTool(), **kwargs):
"""*Initializes pulseTool object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Create Params dict
self.dictParams = {
"name": seqParam("name", "pulseTool", "",
"Change if modifying from default"),
"description": seqParam("Sequence Description",
"Pulse Tool at a set value for a given number of cycles", "", "pulseTool.py"),
"creationDate": seqParam("Creation Date",
"28/10/2020", "", "dd/mm/yyyy"),
"createdBy": seqParam("Created By", "Bijal Patel", "", ""),
"owner": seqParam("Owner", "PCP_Fundamentals", "", ""),
"toolOn": seqParam("Tool on Value", "5", "", "Value to set the Tool for during ON time"),
"toolOff": seqParam("Tool Off Value", "-1", "", "Value to set the Tool for during OFF time, -1 forces tool "
"disengage instead of Off Value"),
"timeOn": seqParam("On Time", "1.00", "seconds", "Per cycle, how long should the tool be ON for (accepts "
"decimals)?"),
"timeOff": seqParam("Off Time", "1.00", "seconds", "Per cycle, how long should the tool be OFF for?"),
"numCycles": seqParam("Cycles", "1", "", "How many cycles to execute?"),
"pauseFinal": seqParam("Include Final Pause?", "N", "(Y/N)", "Should the sequence end with a pause?")
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self, axes: Axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(), tool2: toolSpec = nullTool2(), tool3: toolSpec = nullTool3(), **kwargs):
"""*Initializes PCPCodeFile object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec.Axes3DSpec
The set of axes that commands will be sent to.
tool: toolSpec.toolSpec
A tool that commands will be sent to.
tool2: toolSpec.toolSpec
A tool that commands will be sent to.
tool3: toolSpec.toolSpec
A tool that commands will be sent to.
"""
# Get current Date
dateStr = str(datetime.date(datetime.now()))
currentDate = dateStr[-5:-3] + '\\' + dateStr[-2:] + '\\' + dateStr[:4]
# Create Params dict
self.dictParams = {
"name": seqParam("name", "PCPCodeFile", "",
""),
"description": seqParam("Sequence Description",
"Importing a PCPCode file", "", ""),
"creationDate": seqParam("Creation Date",
currentDate, "", "dd/mm/yyyy"),
"createdBy": seqParam("Created By", "Bijal Patel", "", ""),
"owner": seqParam("Owner", "PCP_Advanced", "", ""),
"filePath": seqParam("PCPCodeFilePath", "PathUnset", "",
"Full File Path to target PCPCode File"),
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self,
axes: Axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(),
dictParams: dict = None,
__verbose__: bool = 0,
tool2: toolSpec = nullTool(),
tool3: toolSpec = nullTool(),
**kwargs):
"""*Initializes sequence object*.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
dictParams: dict
__verbose__: bool
kwargs
"""
# Pass in active axes/tool
self.axes = axes
self.tool = tool
self.tool2 = tool2
self.tool3 = tool3
# Provide default values to dictParams if initialized without
if dictParams is None:
dictParams = {
"name":
seqParam("Sequence Name", "default", "default", "default"),
"description":
seqParam("Sequence description", "default", "default",
"default"),
"owner":
seqParam("PCP_Default", "default", "default", "default"),
}
self.dictParams = dictParams
self.verbose = __verbose__
# Unwrap parameter to get just the string name and description
self.cmdList = []
super().__init__(**kwargs)
def __init__(self,
axes: axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(),
**kwargs):
"""*Initializes gapLine object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Create Params dict
self.dictParams = {
"name":
seqParam("Sequence Name", "gapLine", "",
"Change if modifying from default"),
"description":
seqParam("Sequence Description",
"Lines in X-direction with a gap where tool raises", "",
"gapLine.py"),
"creationDate":
seqParam("Creation Date", "13/11/2019", "", "dd/mm/yyyy"),
"createdBy":
seqParam("Created By", "Bijal Patel", "", ""),
"owner":
seqParam("Owner", "PCP_Electronics", "", "default: PCP_1DCore"),
"printSpd":
seqParam("Printing Speed", "60", "mm/min", ""),
"trvlSpd":
seqParam("Travel Speed", "200", "mm/min", ""),
"xSegLength":
seqParam("x-seglength", "10", "mm", "Length of each X segment"),
"xGap":
seqParam("X-Gap", "2", "mm", "Length of gap in X"),
"numRows":
seqParam("numRows", "3", "mm", "Number of lines to print"),
"ySpacing":
seqParam("Y-Spacing", "3", "mm", "Spacing (in y) between lines"),
"Z-hop height":
seqParam("Z-hop", "1", "", "Height to raise Z-axis for gap"),
"toolOnVal":
seqParam("Tool ON Value", "100", tool.units,
"Depends on tool loaded"),
"toolTrvlVal":
seqParam("Tool Travel Value", "0", tool.units,
"Depends on tool loaded"),
"toolOffVal":
seqParam("Tool OFF Value", "0", tool.units,
"Depends on tool loaded")
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self,
axes: Axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(),
**kwargs):
"""*Initializes GCodeFile object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec.Axes3DSpec
The set of axes that commands will be sent to.
tool: toolSpec.toolSpec
The tool that commands will be sent to.
"""
# Get current Date
dateStr = str(datetime.date(datetime.now()))
currentDate = dateStr[-5:-3] + '\\' + dateStr[-2:] + '\\' + dateStr[:4]
# Create Params dict
self.dictParams = {
"name":
seqParam("name", "GCodeFileInkscape", "",
"Change if modifying from default"),
"description":
seqParam("Sequence Description", "Imported from GCodeFile", "",
""),
"creationDate":
seqParam("Creation Date", currentDate, "", "dd/mm/yyyy"),
"createdBy":
seqParam("Created By", "Bijal Patel", "", ""),
"owner":
seqParam("Owner", "PCP_Advanced", "", ""),
"filePath":
seqParam("GCodeFilePath", "PathUnset", "",
"Full File Path to target GCode File"),
"feedRate":
seqParam("Printing Speed", "60", "mm/min", ""),
"trvRate":
seqParam("Travel Speed", "61", "mm/min", ""),
"zRate":
seqParam("Z Movement Speed", "62", "mm/min", ""),
"Zhop":
seqParam("Z hop height", "2", "mm", ""),
"Ton":
seqParam("Tool on Value", "5", "", "Tool value when dispensing"),
"Toff":
seqParam("Tool off Value", "5", "",
"Tool value when not dispensing"),
"Ttrv":
seqParam("Tool travel Value", "5", "",
"Tool value during travel moves"),
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self,
axes: Axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(),
**kwargs):
"""*Initializes gapLine object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Create Params dict
self.dictParams = {
"name":
seqParam("name", "plate", "", "Change if modifying from default"),
"description":
seqParam(
"Sequence Description",
"Meanderline plate with adjustable parameters and speed/value screening",
"", "plate.py"),
"creationDate":
seqParam("Creation Date", "13/11/2019", "", "dd/mm/yyyy"),
"createdBy":
seqParam("Created By", "Bijal Patel", "", ""),
"owner":
seqParam("Owner", "PCP_Simple2D", "", ""),
"printSpd":
seqParam("Printing Speed", "60", "", ""),
"lineDir":
seqParam("Line direction", "X", "", "Along X or Y"),
"pitch":
seqParam("Line Pitch", "1", "mm", ""),
"length":
seqParam("Line Length", "10", "mm", ""),
"numLines":
seqParam("Number of lines", "5", "mm", ""),
"toolOnVal":
seqParam("Tool ON Value", "100", tool.units,
"Depends on tool loaded"),
"valInc":
seqParam("Value Increment", "0", "", ""),
"valOp":
seqParam("Value Operation", "+", "", ""),
"spdInc":
seqParam("Speed Increment", "0", "", ""),
"spdOp":
seqParam("Speed Operation", "+", "", "")
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self,
axes: Axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(),
**kwargs):
"""*Initializes gapLine object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Create Params dict
self.dictParams = {
"name":
seqParam("name", "line", "", ""),
"description":
seqParam("Sequence Description",
"A single line along a specified vector", "", "line.py"),
"creationDate":
seqParam("Creation Date", "16/11/2019", "", "dd/mm/yyyy"),
"createdBy":
seqParam("Created By", "Bijal Patel", "", ""),
"owner":
seqParam("Owner", "PCP_Fundamentals", "", "default: PCP_Core"),
"feedRate":
seqParam("Axes Speed", "60", "mm/min", ""),
"xMove":
seqParam("X movement", "5", "mm",
"distance/location to move in X"),
"yMove":
seqParam("Y movement", "5", "mm",
"distance/location to move in Y"),
"zMove":
seqParam("Z movement", "5", "mm",
"distance/location to move in Z"),
"toolOnVal":
seqParam("Tool ON Value", "100", tool.units,
"Depends on tool loaded"),
"toolOffVal":
seqParam("Tool OFF Value", "000", tool.units,
"Depends on tool loaded")
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self,
axes: Axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(),
**kwargs):
"""Initializes GCodeFile object with parameters for this sequence.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Get current Date
dateStr = str(datetime.date(datetime.now()))
currentDate = dateStr[-5:-3] + '\\' + dateStr[-2:] + '\\' + dateStr[:4]
# Create Params dict
self.dictParams = {
"name":
seqParam("name", "GCodeFile3DSlicer", "", ""),
"description":
seqParam("Sequence Description",
"Adapts 3D GCode with triggered dispense", "", ""),
"creationDate":
seqParam("Creation Date", currentDate, "", "dd/mm/yyyy"),
"createdBy":
seqParam("Created By", "Bijal Patel", "", ""),
"owner":
seqParam("Owner", "PCP_Advanced", "", "default: PCP_Core"),
"filePath":
seqParam("GCodeFilePath", "PathUnset", "",
"Full File Path to target GCode File"),
"Ton":
seqParam("Tool on Value", "5", "", "Tool value when dispensing"),
"Toff":
seqParam("Tool off Value", "0", "",
"Tool value when not dispensing"),
"Ttrv":
seqParam("Tool travel Value", "0", "",
"Tool value during travel moves"),
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)
def __init__(self,
axes: Axes3DSpec = nullAxes(),
tool: toolSpec = nullTool(),
**kwargs):
"""*Initializes rectangle object with parameters for this sequence*.
Parameters
----------
axes: axes3DSpec
tool: toolSpec
"""
# Create Params dict
self.dictParams = {
"name":
seqParam("name", "rectangle", "", ""),
"description":
seqParam("Sequence Description", "2D Rectangle along the XY axes",
"", ""),
"creationDate":
seqParam("Creation Date", "16/11/2019", "", "dd/mm/yyyy"),
"createdBy":
seqParam("Created By", "Yilong Chang", "", ""),
"owner":
seqParam("Owner", "PCP_Simple2D", "", "default: PCP_Core"),
"printSpd":
seqParam("Printing Speed", "60", "", ""),
"width":
seqParam("Width", "10", "mm", "in y direction"),
"length":
seqParam("Length", "20", "mm", "in x direction"),
"toolOnVal":
seqParam("Tool ON Value", "100", tool.units,
"Depends on tool loaded"),
"toolOffVal":
seqParam("Tool OFF Value", "000", tool.units,
"Depends on tool loaded")
}
# Pass values to parent
super().__init__(axes, tool, self.dictParams, **kwargs)