def removePrinterOption(self, option):
cups.openPPD(self.cur_printer)
try:
cups.removeOption(option)
cups.setOptions()
finally:
cups.closePPD()
def setPrinterOption(self, option, value):
cups.openPPD(self.cur_printer)
try:
cups.addOption("%s=%s" % (option, value))
cups.setOptions()
finally:
cups.closePPD()
def ComboBox_indexChanged(self, currentItem):
sender = self.sender()
currentItem = to_unicode(currentItem)
# Checking for summary control
labelPQValaue = getattr(self, 'PQValueLabel', None)
labelPQColorInput = getattr(self, 'PQColorInputLabel', None)
# When output mode combo item is changed, we need to update the summary information
if currentItem is not None and sender.option == 'OutputMode' and labelPQValaue is not None and labelPQColorInput is not None:
# Setting output mode
self.PQValueLabel.setText(currentItem)
# Getting DPI custom attributefrom the PPD
# Setting color input
quality_attr_name = "OutputModeDPI"
cups.openPPD(self.cur_printer)
outputmode_dpi = cups.findPPDAttribute(quality_attr_name, currentItem)
log.debug("Outputmode changed, setting outputmode_dpi: %s" % outputmode_dpi)
cups.closePPD()
self.PQColorInputLabel.setText(outputmode_dpi)
log.debug("Outputmode changed, setting value outputmode: %s" % currentItem)
def printButton_clicked(self):
if self.invalid_page_range:
self.form.FailureUI(self.__tr("<b>Cannot print: Invalid page range: %1</b><p>A valid page range is a list of pages or ranges of pages separated by commas (e.g., 1-2,4,6-7)").arg(self.pageRangeEdit.text()))
return
try:
try:
self.cur_device.open()
except Error:
self.form.FailureUI(self.__tr("<b>Cannot print: Device is busy or not available.</b><p>Please check device and try again."))
return
if 1: # Go ahead and allow - print will be queued in CUPS if not rejecting
printers = cups.getPrinters()
for p in printers:
if p.name == self.cur_printer:
break
if p.state == cups.IPP_PRINTER_STATE_STOPPED:
self.form.FailureUI(self.__tr("<b>Cannot print: Printer is stopped.</b><p>Please START the printer to continue this print. Job will begin printing once printer is started."))
if not p.accepting:
self.form.FailureUI(self.__tr("<b>Cannot print: Printer is not accepting jobs.</b><p>Please set the printer to ACCEPTING JOBS to continue printing."))
return
copies = int(self.copiesSpinBox.value())
all_pages = self.pages_button_group == 0
page_range = unicode(self.pageRangeEdit.text())
page_set = int(self.pageSetComboBox.currentItem())
cups.resetOptions()
cups.openPPD(self.cur_printer)
current_options = dict(cups.getOptions())
cups.closePPD()
nup = int(current_options.get("number-up", 1))
log.debug("number-up = %d" % nup)
for p, t, d in self.file_list:
alt_nup = (nup > 1 and t == 'application/postscript' and utils.which('psnup'))
if utils.which('lpr'):
if alt_nup:
cmd = ' '.join(['psnup', '-%d' % nup, ''.join(['"', p, '"']), '| lpr -P', self.cur_printer])
else:
cmd = ' '.join(['lpr -P', self.cur_printer])
if copies > 1:
cmd = ' '.join([cmd, '-#%d' % copies])
else:
if alt_nup:
cmd = ' '.join(['psnup', '-%d' % nup, ''.join(['"', p, '"']), '| lp -c -d', self.cur_printer])
else:
cmd = ' '.join(['lp -c -d', self.cur_printer])
if copies > 1:
cmd = ' '.join([cmd, '-n%d' % copies])
if not all_pages and len(page_range) > 0:
cmd = ' '.join([cmd, '-o page-ranges=%s' % page_range])
if page_set > 0:
if page_set == 1:
cmd = ' '.join([cmd, '-o page-set=even'])
else:
cmd = ' '.join([cmd, '-o page-set=odd'])
# Job Storage
# self.job_storage_mode = (0=Off, 1=P&H, 2=PJ, 3=QC, 4=SJ)
# self.job_storage_pin = u"" (dddd)
# self.job_storage_use_pin = True|False
# self.job_storage_username = u""
# self.job_storage_auto_username = True|False
# self.job_storage_jobname = u""
# self.job_storage_auto_jobname = True|False
# self.job_storage_job_exist = (0=replace, 1=job name+(1-99))
if self.job_storage_avail:
if self.job_storage_mode: # On
if self.job_storage_mode == 1: # Proof and Hold
cmd = ' '.join([cmd, '-o HOLD=PROOF'])
elif self.job_storage_mode == 2: # Private Job
if self.job_storage_use_pin:
cmd = ' '.join([cmd, '-o HOLD=ON'])
cmd = ' '.join([cmd, '-o HOLDTYPE=PRIVATE'])
cmd = ' '.join([cmd, '-o HOLDKEY=%s' % self.job_storage_pin.encode('ascii')])
else:
cmd = ' '.join([cmd, '-o HOLD=PROOF'])
cmd = ' '.join([cmd, '-o HOLDTYPE=PRIVATE'])
elif self.job_storage_mode == 3: # Quick Copy
cmd = ' '.join([cmd, '-o HOLD=ON'])
cmd = ' '.join([cmd, '-o HOLDTYPE=PUBLIC'])
elif self.job_storage_mode == 4: # Store Job
if self.job_storage_use_pin:
cmd = ' '.join([cmd, '-o HOLD=STORE'])
cmd = ' '.join([cmd, '-o HOLDTYPE=PRIVATE'])
cmd = ' '.join([cmd, '-o HOLDKEY=%s' % self.job_storage_pin.encode('ascii')])
else:
cmd = ' '.join([cmd, '-o HOLD=STORE'])
cmd = ' '.join([cmd, '-o USERNAME=%s' % self.job_storage_username.encode('ascii')\
.replace(" ", "_")])
cmd = ' '.join([cmd, '-o JOBNAME=%s' % self.job_storage_jobname.encode('ascii')\
.replace(" ", "_")])
if self.job_storage_job_exist == 1:
cmd = ' '.join([cmd, '-o DUPLICATEJOB=APPEND'])
else:
cmd = ' '.join([cmd, '-o DUPLICATEJOB=REPLACE'])
else: # Off
cmd = ' '.join([cmd, '-o HOLD=OFF'])
if not alt_nup:
cmd = ''.join([cmd, ' "', p, '"'])
log.debug("Printing: %s" % cmd)
code = os.system(cmd)
if code != 0:
log.error("Print command failed.")
self.form.FailureUI(self.__tr("Print command failed with error code %1").arg(code))
self.form.close()
finally:
self.cur_device.close()
def updateInfoTable(self):
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
self.DynamicTableWidget.clear()
self.DynamicTableWidget.setRowCount(0)
self.DynamicTableWidget.setColumnCount(0)
flags = Qt.ItemIsSelectable | Qt.ItemIsEnabled
while self.TabWidget.count() > 3:
self.TabWidget.removeTab(3)
self.DynamicTableWidget.clear()
self.DynamicTableWidget.setRowCount(0)
self.DynamicTableWidget.setColumnCount(len(self.headers))
self.DynamicTableWidget.setHorizontalHeaderLabels(self.headers)
#
# Static Data
#
try:
d = device.Device(self.device_uri, None)
except Error:
QApplication.restoreOverrideCursor()
FailureUI(self, self.__tr("<b>Unable to open device %s.</b>"%(self.device_uri)))
#self.close()
return
self.StaticTableWidget.clear()
self.StaticTableWidget.setColumnCount(len(self.headers))
self.StaticTableWidget.setHorizontalHeaderLabels(self.headers)
mq_keys = list(d.mq.keys())
mq_keys.sort()
self.StaticTableWidget.setRowCount(len(mq_keys))
for row, key in enumerate(mq_keys):
i = QTableWidgetItem(QString(key))
i.setFlags(flags)
self.StaticTableWidget.setItem(row, 0, i)
i = QTableWidgetItem(QString(str(d.mq[key])))
i.setFlags(flags)
self.StaticTableWidget.setItem(row, 1, i)
self.StaticTableWidget.resizeColumnToContents(0)
self.StaticTableWidget.resizeColumnToContents(1)
self.StaticTableWidget.setSortingEnabled(True)
self.StaticTableWidget.sortItems(0)
#
# Dynamic Data
#
try:
try:
d.open()
d.queryDevice()
except Error as e:
QApplication.restoreOverrideCursor()
FailureUI(self, self.__tr("<b>Unable to open device %s.</b>"%(self.device_uri)))
#self.close()
return
dq_keys = list(d.dq.keys())
dq_keys.sort()
self.DynamicTableWidget.setRowCount(len(dq_keys))
for row, key in enumerate(dq_keys):
i = QTableWidgetItem(QString(key))
i.setFlags(flags)
self.DynamicTableWidget.setItem(row, 0, i)
i = QTableWidgetItem(QString(str(d.dq[key])))
i.setFlags(flags)
self.DynamicTableWidget.setItem(row, 1, i)
self.DynamicTableWidget.resizeColumnToContents(0)
self.DynamicTableWidget.resizeColumnToContents(1)
self.DynamicTableWidget.setSortingEnabled(True)
self.DynamicTableWidget.sortItems(0)
finally:
d.close()
#
# History Table
#
self.HistoryTableWidget.clear()
self.HistoryTableWidget.setRowCount(0)
if d.device_type == DEVICE_TYPE_FAX:
self.history_headers[1] = self.__tr("Fax")
else:
self.history_headers[1] = self.__tr("Printer")
self.HistoryTableWidget.setColumnCount(len(self.history_headers))
self.HistoryTableWidget.setHorizontalHeaderLabels(self.history_headers)
history = d.queryHistory()
history.reverse()
self.HistoryTableWidget.setRowCount(len(history))
for row, h in enumerate(history):
dt = QDateTime()
dt.setTime_t(int(h.timedate))
dt = value_str(dt)
ess = device.queryString(h.event_code, 0)
for col, t in enumerate([dt, h.printer_name,
to_unicode(h.event_code), ess,
h.username, to_unicode(h.job_id),
h.title]):
i = QTableWidgetItem(QString(t))
i.setFlags(flags)
self.HistoryTableWidget.setItem(row, col, i)
self.HistoryTableWidget.resizeColumnToContents(0)
self.HistoryTableWidget.resizeColumnToContents(1)
self.HistoryTableWidget.setSortingEnabled(True)
self.HistoryTableWidget.sortItems(0)
#
# Printer Data
#
printers = cups.getPrinters()
for p in printers:
if p.device_uri == self.device_uri:
Tab = QWidget()
Tab.setObjectName(QString(p.name))
GridLayout = QGridLayout(Tab)
GridLayout.setObjectName(QString("GridLayout-%s" % p.name))
Table = QTableWidget(Tab)
Table.setAlternatingRowColors(True)
Table.setSelectionMode(QAbstractItemView.SingleSelection)
Table.setSelectionBehavior(QAbstractItemView.SelectRows)
Table.setVerticalScrollMode(QAbstractItemView.ScrollPerItem)
Table.setHorizontalScrollMode(QAbstractItemView.ScrollPerPixel)
Table.setGridStyle(Qt.DotLine)
Table.setObjectName(QString("Table-%s" % p.name))
GridLayout.addWidget(Table, 0, 0, 1, 1)
self.TabWidget.addTab(Tab, QString(p.name))
Table.setColumnCount(len(self.headers))
Table.setHorizontalHeaderLabels(self.headers)
cups.resetOptions()
cups.openPPD(p.name)
current_options = dict(cups.getOptions())
#current_options['cups_error_log_level'] = cups.getErrorLogLevel()
try:
f = open(os.path.expanduser('~/.cups/lpoptions'))
except IOError as e:
log.debug(str(e))
current_options['lpoptions_file_data'] = QString("(%s)"%str(e))
else:
text = f.read()
for d in text.splitlines():
if p.name in d:
current_options['lpoptions_file_data'] = d
break
else:
current_options['lpoptions_file_data'] = self.__tr("(no data)")
keys = list(current_options.keys())
keys.sort()
Table.setRowCount(len(keys))
for row, key in enumerate(keys):
i = QTableWidgetItem(QString(key))
i.setFlags(flags)
Table.setItem(row, 0, i)
if key == 'printer-state':
state = int(current_options[key])
if state == cups.IPP_PRINTER_STATE_IDLE:
i = QTableWidgetItem(self.__tr("idle (%s)"%state))
elif state == cups.IPP_PRINTER_STATE_PROCESSING:
i = QTableWidgetItem(self.__tr("busy/printing (%s)"%state))
elif state == cups.IPP_PRINTER_STATE_STOPPED:
i = QTableWidgetItem(self.__tr("stopped (%s)"%state))
else:
i = QTableWidgetItem(QString(str(state)))
else:
i = QTableWidgetItem(QString(str(current_options[key])))
i.setFlags(flags)
Table.setItem(row, 1, i)
Table.resizeColumnToContents(0)
Table.resizeColumnToContents(1)
Table.setSortingEnabled(True)
Table.sortItems(0)
cups.closePPD()
self.TabWidget.setCurrentIndex(0)
QApplication.restoreOverrideCursor()
def updateInfoTable(self):
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
self.DynamicTableWidget.clear()
self.DynamicTableWidget.setRowCount(0)
self.DynamicTableWidget.setColumnCount(0)
flags = Qt.ItemIsSelectable | Qt.ItemIsEnabled
while self.TabWidget.count() > 3:
self.TabWidget.removeTab(3)
self.DynamicTableWidget.clear()
self.DynamicTableWidget.setRowCount(0)
self.DynamicTableWidget.setColumnCount(len(self.headers))
self.DynamicTableWidget.setHorizontalHeaderLabels(self.headers)
#
# Static Data
#
try:
d = device.Device(self.device_uri, None)
except Error:
QApplication.restoreOverrideCursor()
FailureUI(
self,
self.__tr("<b>Unable to open device %s.</b>" %
(self.device_uri)))
#self.close()
return
self.StaticTableWidget.clear()
self.StaticTableWidget.setColumnCount(len(self.headers))
self.StaticTableWidget.setHorizontalHeaderLabels(self.headers)
mq_keys = list(d.mq.keys())
mq_keys.sort()
self.StaticTableWidget.setRowCount(len(mq_keys))
for row, key in enumerate(mq_keys):
i = QTableWidgetItem(str(key))
i.setFlags(flags)
self.StaticTableWidget.setItem(row, 0, i)
i = QTableWidgetItem(str(d.mq[key]))
i.setFlags(flags)
self.StaticTableWidget.setItem(row, 1, i)
self.StaticTableWidget.resizeColumnToContents(0)
self.StaticTableWidget.resizeColumnToContents(1)
self.StaticTableWidget.setSortingEnabled(True)
self.StaticTableWidget.sortItems(0)
#
# Dynamic Data
#
try:
try:
d.open()
d.queryDevice()
except Error as e:
QApplication.restoreOverrideCursor()
FailureUI(
self,
self.__tr("<b>Unable to open device %s.</b>" %
(self.device_uri)))
#self.close()
return
dq_keys = list(d.dq.keys())
dq_keys.sort()
self.DynamicTableWidget.setRowCount(len(dq_keys))
for row, key in enumerate(dq_keys):
i = QTableWidgetItem(str(key))
i.setFlags(flags)
self.DynamicTableWidget.setItem(row, 0, i)
i = QTableWidgetItem(str(d.dq[key]))
i.setFlags(flags)
self.DynamicTableWidget.setItem(row, 1, i)
self.DynamicTableWidget.resizeColumnToContents(0)
self.DynamicTableWidget.resizeColumnToContents(1)
self.DynamicTableWidget.setSortingEnabled(True)
self.DynamicTableWidget.sortItems(0)
finally:
d.close()
#
# History Table
#
self.HistoryTableWidget.clear()
self.HistoryTableWidget.setRowCount(0)
if d.device_type == DEVICE_TYPE_FAX:
self.history_headers[1] = self.__tr("Fax")
else:
self.history_headers[1] = self.__tr("Printer")
self.HistoryTableWidget.setColumnCount(len(self.history_headers))
self.HistoryTableWidget.setHorizontalHeaderLabels(self.history_headers)
history = d.queryHistory()
history.reverse()
self.HistoryTableWidget.setRowCount(len(history))
for row, h in enumerate(history):
dt = QDateTime()
dt.setTime_t(int(h.timedate))
dt = value_str(dt)
ess = device.queryString(h.event_code, 0)
for col, t in enumerate([
dt, h.printer_name,
to_unicode(h.event_code), ess, h.username,
to_unicode(h.job_id), h.title
]):
i = QTableWidgetItem(str(t))
i.setFlags(flags)
self.HistoryTableWidget.setItem(row, col, i)
self.HistoryTableWidget.resizeColumnToContents(0)
self.HistoryTableWidget.resizeColumnToContents(1)
self.HistoryTableWidget.setSortingEnabled(True)
self.HistoryTableWidget.sortItems(0)
#
# Printer Data
#
printers = cups.getPrinters()
for p in printers:
if p.device_uri == self.device_uri:
Tab = QWidget()
Tab.setObjectName(str(p.name))
GridLayout = QGridLayout(Tab)
GridLayout.setObjectName(str("GridLayout-%s" % p.name))
Table = QTableWidget(Tab)
Table.setAlternatingRowColors(True)
Table.setSelectionMode(QAbstractItemView.SingleSelection)
Table.setSelectionBehavior(QAbstractItemView.SelectRows)
Table.setVerticalScrollMode(QAbstractItemView.ScrollPerItem)
Table.setHorizontalScrollMode(QAbstractItemView.ScrollPerPixel)
Table.setGridStyle(Qt.DotLine)
Table.setObjectName(str("Table-%s" % p.name))
GridLayout.addWidget(Table, 0, 0, 1, 1)
self.TabWidget.addTab(Tab, str(p.name))
Table.setColumnCount(len(self.headers))
Table.setHorizontalHeaderLabels(self.headers)
cups.resetOptions()
cups.openPPD(p.name)
current_options = dict(cups.getOptions())
#current_options['cups_error_log_level'] = cups.getErrorLogLevel()
try:
f = open(os.path.expanduser('~/.cups/lpoptions'))
except IOError as e:
log.debug(str(e))
current_options['lpoptions_file_data'] = str("(%s)" %
str(e))
else:
text = f.read()
for d in text.splitlines():
if p.name in d:
current_options['lpoptions_file_data'] = d
break
else:
current_options['lpoptions_file_data'] = self.__tr(
"(no data)")
keys = list(current_options.keys())
keys.sort()
Table.setRowCount(len(keys))
for row, key in enumerate(keys):
i = QTableWidgetItem(str(key))
i.setFlags(flags)
Table.setItem(row, 0, i)
if key == 'printer-state':
state = int(current_options[key])
if state == cups.IPP_PRINTER_STATE_IDLE:
i = QTableWidgetItem(self.__tr("idle (%s)" %
state))
elif state == cups.IPP_PRINTER_STATE_PROCESSING:
i = QTableWidgetItem(
self.__tr("busy/printing (%s)" % state))
elif state == cups.IPP_PRINTER_STATE_STOPPED:
i = QTableWidgetItem(
self.__tr("stopped (%s)" % state))
else:
i = QTableWidgetItem(str(state))
else:
i = QTableWidgetItem(str(current_options[key]))
i.setFlags(flags)
Table.setItem(row, 1, i)
Table.resizeColumnToContents(0)
Table.resizeColumnToContents(1)
Table.setSortingEnabled(True)
Table.sortItems(0)
cups.closePPD()
self.TabWidget.setCurrentIndex(0)
QApplication.restoreOverrideCursor()
def addJobStorage(self, current_options=None):
self.addJobStorageMode()
self.addJobStoragePIN()
self.addJobStorageUsername()
self.addJobStorageID()
self.addJobStorageIDExists()
self.jobStorageDisable()
if current_options is None:
cups.resetOptions()
cups.openPPD(self.cur_printer)
current_options = dict(cups.getOptions())
cups.closePPD()
self.job_storage_pin = unicode(current_options.get('HOLDKEY', '0000')[:4])
self.jobStoragePINEdit.setText(self.job_storage_pin)
self.job_storage_username = unicode(current_options.get('USERNAME', prop.username)[:16])
self.jobStorageUsernameEdit.setText(self.job_storage_username)
self.job_storage_jobname = unicode(current_options.get('JOBNAME', u"Untitled")[:16])
self.jobStorageIDEdit.setText(self.job_storage_jobname)
hold = current_options.get('HOLD', 'OFF')
holdtype = current_options.get('HOLDTYPE', 'PUBLIC')
if hold == 'OFF':
self.job_storage_mode = JOB_STORAGE_TYPE_OFF
elif hold == 'ON':
if holdtype == 'PUBLIC':
self.job_storage_mode = JOB_STORAGE_TYPE_QUICK_COPY
else: # 'PRIVATE'
self.job_storage_mode = JOB_STORAGE_TYPE_PERSONAL
self.job_storage_use_pin = True
elif hold == 'PROOF':
if holdtype == 'PUBLIC':
self.job_storage_mode = JOB_STORAGE_TYPE_PROOF_AND_HOLD
else:
self.job_storage_mode = JOB_STORAGE_TYPE_PERSONAL
self.job_storage_use_pin = True
elif hold == 'STORE':
self.job_storage_mode = JOB_STORAGE_TYPE_STORE
self.job_storage_use_pin = (holdtype == 'PRIVATE')
self.jobStorageModeComboBox.setCurrentItem(self.job_storage_mode)
self.jobStorageModeDefaultPushButton.setEnabled(self.job_storage_mode != JOB_STORAGE_TYPE_OFF)
self.setModeTooltip()
self.setPrinterOptionHold()
duplicate = current_options.get('DUPLICATEJOB', 'REPLACE')
if duplicate == 'REPLACE':
self.job_storage_job_exist = 0
else:
self.job_storage_job_exist = 1
self.jobStorageIDExistsComboBox.setCurrentItem(self.job_storage_job_exist)
self.setPrinterOptionIDExists()
#
if self.job_storage_mode == JOB_STORAGE_TYPE_OFF:
self.jobStorageDisable()
else:
self.jobStorageUserJobEnable()
self.setPrinterOptionID()
self.setPrinterOptionPIN()
self.setPrinterOptionUsername()
self.jobStoragePINButtonGroup.setButton(self.job_storage_use_pin)
self.jobStoragePINEnable(self.job_storage_mode in (JOB_STORAGE_TYPE_PERSONAL, JOB_STORAGE_TYPE_STORE))
def fillControls(self):
QApplication.setOverrideCursor(QApplication.waitCursor)
ScrollView.fillControls(self)
self.loading = True
cups.resetOptions()
cups.openPPD(self.cur_printer)
cur_outputmode = ""
#if 1:
try:
if 1:
#try:
current_options = dict(cups.getOptions())
if not self.cur_device.device_type == DEVICE_TYPE_FAX:
self.addGroupHeading("basic", self.__tr("Basic"))
log.debug("Group: Basic")
# Basic
# PageSize (in PPD section)
# orientation-requested
# sides
# outputorder
# Collate
current = current_options.get('orientation-requested', '3')
self.addItem("basic", "orientation-requested", self.__tr("Page Orientation"),
cups.PPD_UI_PICKONE, current,
[('3', self.__tr('Portrait')),
('4', self.__tr('Landscape')),
('5', self.__tr('Reverse landscape')),
('6', self.__tr('Reverse portrait'))], '3')
log.debug("Option: orientation-requested")
log.debug("Current value: %s" % current)
duplexer = self.cur_device.dq.get('duplexer', 0)
log.debug("Duplexer = %d" % duplexer)
if duplexer:
current = current_options.get('sides', 'one-sided')
self.addItem("basic", "sides",
self.__tr("Duplex (Print on both sides of the page)"),
cups.PPD_UI_PICKONE, current,
[('one-sided',self.__tr('Single sided')),
('two-sided-long-edge', self.__tr('Two sided (long edge)')),
('two-sided-short-edge', self.__tr('Two sided (short edge)'))], 'one-sided')
log.debug("Option: sides")
log.debug("Current value: %s" % current)
current = current_options.get('outputorder', 'normal')
self.addItem("basic", "outputorder",
self.__tr("Output Order (Print last page first)"),
cups.PPD_UI_PICKONE, current,
[('normal', self.__tr('Normal (Print first page first)')),
('reverse', self.__tr('Reversed (Print last page first)'))], 'normal')
log.debug("Option: outputorder")
log.debug("Current value: %s" % current)
current = utils.to_bool(current_options.get('Collate', '0'))
self.addItem("basic", "Collate",
self.__tr("Collate (Group together multiple copies)"),
cups.PPD_UI_BOOLEAN, current,
[], 0)
log.debug("Option: Collate")
log.debug("Current value: %s" % current)
groups = cups.getGroupList()
for g in groups:
log.debug("Group: %s" % repr(g))
if 'jobretention' in g.lower():
log.debug("HPJobRetention skipped.")
continue
text, num_subgroups = cups.getGroup(g)
read_only = 'install' in g.lower()
try:
text = text.decode('utf-8')
except UnicodeDecodeError:
pass
if g.lower() == 'printoutmode':
text = self.__tr("Quality")
self.addGroupHeading(g, text, read_only)
log.debug(" Text: %s" % repr(text))
log.debug("Num subgroups: %d" % num_subgroups)
options = cups.getOptionList(g)
for o in options:
log.debug(" Option: %s" % repr(o))
if 'pageregion' in o.lower():
log.debug("Page Region skipped.")
continue
option_text, defchoice, conflicted, ui = cups.getOption(g, o)
try:
option_text = option_text.decode('utf-8')
except UnicodeDecodeError:
pass
if o.lower() == 'quality':
option_text = self.__tr("Quality")
log.debug(" Text: %s" % repr(option_text))
log.debug(" Defchoice: %s" % repr(defchoice))
choices = cups.getChoiceList(g, o)
value = None
choice_data = []
for c in choices:
log.debug(" Choice: %s" % repr(c))
# TODO: Add custom paper size controls
if 'pagesize' in o.lower() and 'custom' in c.lower():
log.debug("Skipped.")
continue
choice_text, marked = cups.getChoice(g, o, c)
try:
choice_text = choice_text.decode('utf-8')
except UnicodeDecodeError:
pass
log.debug(" Text: %s" % repr(choice_text))
if marked:
value = c
choice_data.append((c, choice_text))
if o.lower() == 'outputmode':
if value is not None:
cur_outputmode = value
else:
cur_outputmode = defchoice
self.addItem(g, o, option_text, ui, value, choice_data, defchoice, read_only)
## if 'pagesize' in o.lower(): # and 'custom' in c.lower():
## current = 0.0
## width_widget = self.addItem("custom", "custom-width", self.__tr("Custom Paper Width"), cups.UI_UNITS_SPINNER,
## current, (0.0, 0.0), 0.0)
##
## current = 0.0
## height_widget = self.addItem("custom", "custom-height", self.__tr("Custom Paper Height"), cups.UI_UNITS_SPINNER,
## current, (0.0, 0.0), 0.0)
##
## if value.lower() == 'custom':
## pass
# N-Up
# number-up
# number-up-layout
# page-border
self.addGroupHeading("nup",
self.__tr("N-Up (Multiple document pages per printed page)"))
log.debug("Group: N-Up")
current = current_options.get('number-up', '1')
self.addItem("nup", "number-up", self.__tr("Pages per Sheet"),
cups.PPD_UI_PICKONE, current,
[('1', self.__tr('1 page per sheet')),
('2', self.__tr('2 pages per sheet')),
('4', self.__tr('4 pages per sheet'))], '1')
log.debug(" Option: number-up")
log.debug(" Current value: %s" % current)
current = current_options.get('number-up-layout', 'lrtb')
self.addItem("nup", "number-up-layout", self.__tr("Layout"),
cups.PPD_UI_PICKONE, current,
[('btlr', self.__tr('Bottom to top, left to right')),
('btrl', self.__tr('Bottom to top, right to left')),
('lrbt', self.__tr('Left to right, bottom to top')),
('lrtb', self.__tr('Left to right, top to bottom')),
('rlbt', self.__tr('Right to left, bottom to top')),
('rltb', self.__tr('Right to left, top to bottom')),
('tblr', self.__tr('Top to bottom, left to right')),
('tbrl', self.__tr('Top to bottom, right to left')) ], 'lrtb')
log.debug(" Option: number-up-layout")
log.debug(" Current value: %s" % current)
current = current_options.get('page-border', 'none')
self.addItem("nup", "page-border",
self.__tr("Printed Border Around Each Page"),
cups.PPD_UI_PICKONE, current,
[('double', self.__tr("Two thin borders")),
("double-thick", self.__tr("Two thick borders")),
("none", self.__tr("No border")),
("single", self.__tr("One thin border")),
("single-thick", self.__tr("One thick border"))], 'none')
log.debug(" Option: page-border")
log.debug(" Current value: %s" % current)
# Adjustment
# brightness
# gamma
if not self.cur_device.device_type == DEVICE_TYPE_FAX:
self.addGroupHeading("adjustment", self.__tr("Printout Appearance"))
current = int(current_options.get('brightness', 100))
log.debug(" Option: brightness")
log.debug(" Current value: %s" % current)
self.addItem("adjustment", "brightness", self.__tr("Brightness"),
cups.UI_SPINNER, current, (0, 200), 100, suffix=" %")
current = int(current_options.get('gamma', 1000))
log.debug(" Option: gamma")
log.debug(" Current value: %s" % current)
self.addItem("adjustment", "gamma", self.__tr("Gamma"), cups.UI_SPINNER, current,
(1, 10000), 1000)
# Margins (pts)
# page-left
# page-right
# page-top
# page-bottom
## if 0:
## # TODO: cupsPPDPageSize() fails on LaserJets. How do we get margins in this case? Defaults?
## # PPD file for LJs has a HWMargin entry...
## page, page_width, page_len, left, bottom, right, top = cups.getPPDPageSize()
##
## right = page_width - right
## top = page_len - top
##
## self.addGroupHeading("margins", self.__tr("Margins"))
## current_top = current_options.get('page-top', 0) # pts
## current_bottom = current_options.get('page-bottom', 0) # pts
## current_left = current_options.get('page-left', 0) # pts
## current_right = current_options.get('page-right', 0) # pts
##
## log.debug(" Option: page-top")
## log.debug(" Current value: %s" % current_top)
##
## self.addItem("margins", "page-top", self.__tr("Top margin"),
## cups.UI_UNITS_SPINNER, current_top,
## (0, page_len), top)
##
## self.addItem("margins", "page-bottom", self.__tr("Bottom margin"),
## cups.UI_UNITS_SPINNER, current_bottom,
## (0, page_len), bottom)
##
## self.addItem("margins", "page-left", self.__tr("Right margin"),
## cups.UI_UNITS_SPINNER, current_left,
## (0, page_width), left)
##
## self.addItem("margins", "page-right", self.__tr("Left margin"),
## cups.UI_UNITS_SPINNER, current_right,
## (0, page_width), right)
# Image Printing
# position
# natural-scaling
# saturation
# hue
self.addGroupHeading("image", self.__tr("Image Printing"))
current = utils.to_bool(current_options.get('fitplot', 'false'))
self.addItem("image", "fitplot",
self.__tr("Fit to Page"),
cups.PPD_UI_BOOLEAN, current,
[], 0)
current = current_options.get('position', 'center')
self.addItem("image", "position", self.__tr("Position on Page"),
cups.PPD_UI_PICKONE, current,
[('center', self.__tr('Centered')),
('top', self.__tr('Top')),
('left', self.__tr('Left')),
('right', self.__tr('Right')),
('top-left', self.__tr('Top left')),
('top-right', self.__tr('Top right')),
('bottom', self.__tr('Bottom')),
('bottom-left', self.__tr('Bottom left')),
('bottom-right', self.__tr('Bottom right'))], 'center')
log.debug(" Option: position")
log.debug(" Current value: %s" % current)
if not self.cur_device.device_type == DEVICE_TYPE_FAX:
current = int(current_options.get('saturation', 100))
log.debug(" Option: saturation")
log.debug(" Current value: %s" % current)
self.addItem("image", "saturation", self.__tr("Saturation"),
cups.UI_SPINNER, current, (0, 200), 100, suffix=" %")
current = int(current_options.get('hue', 0))
log.debug(" Option: hue")
log.debug(" Current value: %s" % current)
self.addItem("image", "hue", self.__tr("Hue (color shift/rotation)"),
cups.UI_SPINNER, current,
(-100, 100), 0)
current = int(current_options.get('natural-scaling', 100))
log.debug(" Option: natural-scaling")
log.debug(" Current value: %s" % current)
self.addItem("image", "natural-scaling",
self.__tr('"Natural" Scaling (relative to image)'),
cups.UI_SPINNER, current, (1, 800), 100, suffix=" %")
current = int(current_options.get('scaling', 100))
log.debug(" Option: scaling")
log.debug(" Current value: %s" % current)
self.addItem("image", "scaling", self.__tr("Scaling (relative to page)"),
cups.UI_SPINNER, current,
(1, 800), 100, suffix=" %")
# Misc
# PrettyPrint
# job-sheets
# mirror
self.addGroupHeading("misc", self.__tr("Miscellaneous"))
log.debug("Group: Misc")
current = utils.to_bool(current_options.get('prettyprint', '0'))
self.addItem("misc", "prettyprint",
self.__tr('"Pretty Print" Text Documents (Add headers and formatting)'),
cups.PPD_UI_BOOLEAN, current, [], 0)
log.debug(" Option: prettyprint")
log.debug(" Current value: %s" % current)
if not self.cur_device.device_type == DEVICE_TYPE_FAX:
current = current_options.get('job-sheets', 'none').split(',')
try:
start = current[0]
except IndexError:
start = 'none'
try:
end = current[1]
except IndexError:
end = 'none'
# TODO: Look for locally installed banner pages beyond the default CUPS ones?
self.addItem("misc", "job-sheets", self.__tr("Banner Pages"), cups.UI_BANNER_JOB_SHEETS,
(start, end),
[("none", self.__tr("No banner page")),
('classified', self.__tr("Classified")),
('confidential', self.__tr("Confidential")),
('secret', self.__tr("Secret")),
('standard', self.__tr("Standard")),
('topsecret', self.__tr("Top secret")),
('unclassified', self.__tr("Unclassified"))], ('none', 'none'))
log.debug(" Option: job-sheets")
log.debug(" Current value: %s,%s" % (start, end))
current = utils.to_bool(current_options.get('mirror', '0'))
self.addItem("misc", "mirror", self.__tr('Mirror Printing'),
cups.PPD_UI_BOOLEAN, current, [], 0)
log.debug(" Option: mirror")
log.debug(" Current value: %s" % current)
#Summary
#color input
#quality
quality_attr_name = "OutputModeDPI"
cur_outputmode_dpi = cups.findPPDAttribute(quality_attr_name, cur_outputmode)
if cur_outputmode_dpi is not None:
log.debug("Adding Group: Summary outputmode is : %s" % cur_outputmode)
log.debug("Adding Group: Summary outputmode dpi is : %s" % str (cur_outputmode_dpi))
self.addGroupHeading("summry", self.__tr("Summary"))
self.addItem("summry", "colorinput", self.__tr('Color Input / Black Render'),
cups.UI_INFO, cur_outputmode_dpi, [], 0)
self.addItem("summry", "quality", self.__tr('Print Quality'),
cups.UI_INFO, cur_outputmode, [], 0)
self.job_storage_avail = 0 #self.cur_device.mq['job-storage'] == JOB_STORAGE_ENABLE
#print current_options
if self.job_storage_avail:
self.addGroupHeading("jobstorage", self.__tr("Job Storage and Secure Printing"))
self.addJobStorage(current_options)
#except Exception, e:
#log.exception()
# pass
finally:
cups.closePPD()
self.loading = False
QApplication.restoreOverrideCursor()
self.__tr("stopped (%1)").arg(state))
else:
i = QTableWidgetItem(QString(str(state)))
else:
i = QTableWidgetItem(QString(str(
current_options[key])))
i.setFlags(flags)
Table.setItem(row, 1, i)
Table.resizeColumnToContents(0)
Table.resizeColumnToContents(1)
Table.setSortingEnabled(True)
Table.sortItems(0)
cups.closePPD()
self.TabWidget.setCurrentIndex(0)
QApplication.restoreOverrideCursor()
def DeviceUriComboBox_currentChanged(self, device_uri):
self.device_uri = device_uri
self.updateInfoTable()
def DeviceUriComboBox_noDevices(self):
FailureUI(self, self.__tr("<b>No devices found.</b>"))
self.close()
def CancelButton_clicked(self):
self.close()
#
def addJobStorage(self, current_options=None):
self.addJobStorageMode()
self.addJobStoragePIN()
self.addJobStorageUsername()
self.addJobStorageID()
self.addJobStorageIDExists()
self.jobStorageDisable()
if current_options is None:
cups.resetOptions()
cups.openPPD(self.cur_printer)
current_options = dict(cups.getOptions())
cups.closePPD()
self.job_storage_pin = to_unicode(
current_options.get('HOLDKEY', '0000')[:4])
self.jobStoragePINEdit.setText(self.job_storage_pin)
self.job_storage_username = to_unicode(
current_options.get('USERNAME', prop.username)[:16])
self.jobStorageUsernameEdit.setText(self.job_storage_username)
self.job_storage_jobname = to_unicode(
current_options.get('JOBNAME', "Untitled")[:16])
self.jobStorageIDEdit.setText(self.job_storage_jobname)
hold = current_options.get('HOLD', 'OFF')
holdtype = current_options.get('HOLDTYPE', 'PUBLIC')
if hold == 'OFF':
self.job_storage_mode = JOB_STORAGE_TYPE_OFF
elif hold == 'ON':
if holdtype == 'PUBLIC':
self.job_storage_mode = JOB_STORAGE_TYPE_QUICK_COPY
else: # 'PRIVATE'
self.job_storage_mode = JOB_STORAGE_TYPE_PERSONAL
self.job_storage_use_pin = True
elif hold == 'PROOF':
if holdtype == 'PUBLIC':
self.job_storage_mode = JOB_STORAGE_TYPE_PROOF_AND_HOLD
else:
self.job_storage_mode = JOB_STORAGE_TYPE_PERSONAL
self.job_storage_use_pin = True
elif hold == 'STORE':
self.job_storage_mode = JOB_STORAGE_TYPE_STORE
self.job_storage_use_pin = (holdtype == 'PRIVATE')
self.jobStorageModeComboBox.setCurrentItem(self.job_storage_mode)
self.jobStorageModeDefaultPushButton.setEnabled(
self.job_storage_mode != JOB_STORAGE_TYPE_OFF)
self.setModeTooltip()
self.setPrinterOptionHold()
duplicate = current_options.get('DUPLICATEJOB', 'REPLACE')
if duplicate == 'REPLACE':
self.job_storage_job_exist = 0
else:
self.job_storage_job_exist = 1
self.jobStorageIDExistsComboBox.setCurrentItem(
self.job_storage_job_exist)
self.setPrinterOptionIDExists()
#
if self.job_storage_mode == JOB_STORAGE_TYPE_OFF:
self.jobStorageDisable()
else:
self.jobStorageUserJobEnable()
self.setPrinterOptionID()
self.setPrinterOptionPIN()
self.setPrinterOptionUsername()
self.jobStoragePINButtonGroup.setButton(self.job_storage_use_pin)
self.jobStoragePINEnable(
self.job_storage_mode in (JOB_STORAGE_TYPE_PERSONAL,
JOB_STORAGE_TYPE_STORE))
def addJobStorage(self, current_options=None):
self.addJobStorageMode()
self.addJobStoragePIN()
self.addJobStorageUsername()
self.addJobStorageID()
self.addJobStorageIDExists()
self.jobStorageDisable()
if current_options is None:
cups.resetOptions()
cups.openPPD(self.cur_printer)
current_options = dict(cups.getOptions())
cups.closePPD()
self.job_storage_pin = to_unicode(current_options.get("HOLDKEY", "0000")[:4])
self.jobStoragePINEdit.setText(self.job_storage_pin)
self.job_storage_username = to_unicode(current_options.get("USERNAME", prop.username)[:16])
self.jobStorageUsernameEdit.setText(self.job_storage_username)
self.job_storage_jobname = to_unicode(current_options.get("JOBNAME", "Untitled")[:16])
self.jobStorageIDEdit.setText(self.job_storage_jobname)
hold = current_options.get("HOLD", "OFF")
holdtype = current_options.get("HOLDTYPE", "PUBLIC")
if hold == "OFF":
self.job_storage_mode = JOB_STORAGE_TYPE_OFF
elif hold == "ON":
if holdtype == "PUBLIC":
self.job_storage_mode = JOB_STORAGE_TYPE_QUICK_COPY
else: # 'PRIVATE'
self.job_storage_mode = JOB_STORAGE_TYPE_PERSONAL
self.job_storage_use_pin = True
elif hold == "PROOF":
if holdtype == "PUBLIC":
self.job_storage_mode = JOB_STORAGE_TYPE_PROOF_AND_HOLD
else:
self.job_storage_mode = JOB_STORAGE_TYPE_PERSONAL
self.job_storage_use_pin = True
elif hold == "STORE":
self.job_storage_mode = JOB_STORAGE_TYPE_STORE
self.job_storage_use_pin = holdtype == "PRIVATE"
self.jobStorageModeComboBox.setCurrentItem(self.job_storage_mode)
self.jobStorageModeDefaultPushButton.setEnabled(self.job_storage_mode != JOB_STORAGE_TYPE_OFF)
self.setModeTooltip()
self.setPrinterOptionHold()
duplicate = current_options.get("DUPLICATEJOB", "REPLACE")
if duplicate == "REPLACE":
self.job_storage_job_exist = 0
else:
self.job_storage_job_exist = 1
self.jobStorageIDExistsComboBox.setCurrentItem(self.job_storage_job_exist)
self.setPrinterOptionIDExists()
#
if self.job_storage_mode == JOB_STORAGE_TYPE_OFF:
self.jobStorageDisable()
else:
self.jobStorageUserJobEnable()
self.setPrinterOptionID()
self.setPrinterOptionPIN()
self.setPrinterOptionUsername()
self.jobStoragePINButtonGroup.setButton(self.job_storage_use_pin)
self.jobStoragePINEnable(self.job_storage_mode in (JOB_STORAGE_TYPE_PERSONAL, JOB_STORAGE_TYPE_STORE))
elif state == cups.IPP_PRINTER_STATE_STOPPED:
i = QTableWidgetItem(self.__tr("stopped (%1)").arg(state))
else:
i = QTableWidgetItem(QString(str(state)))
else:
i = QTableWidgetItem(QString(str(current_options[key])))
i.setFlags(flags)
Table.setItem(row, 1, i)
Table.resizeColumnToContents(0)
Table.resizeColumnToContents(1)
Table.setSortingEnabled(True)
Table.sortItems(0)
cups.closePPD()
self.TabWidget.setCurrentIndex(0)
QApplication.restoreOverrideCursor()
def DeviceUriComboBox_currentChanged(self, device_uri):
self.device_uri = device_uri
self.updateInfoTable()
def DeviceUriComboBox_noDevices(self):
FailureUI(self, self.__tr("<b>No devices found.</b>"))
self.close()
def CancelButton_clicked(self):