def generate(self, config):
back_rest = draw.makeBox(config.width,
config.back_rest_thickness,
config.back_rest_height)
no_of_portions = 2. * config.no_of_holes + 1
bar_width = config.width/no_of_portions
bar_height = config.back_rest_height - (config.back_rest_height/10) * 2
x = 0
for i in range(no_of_portions):
if i%2 != 0:
bar_origin = (x,0,config.back_rest_height/10)
bar = draw.makeBox(bar_width,
config.back_rest_thickness,
bar_height,bar_origin)
back_rest = back_rest.cut(bar)
x = x+bar_width
x = self.picker.pick((1.0))
wood_id = self.get_material('grass', M(texture='bark.jpg'))
back_rest.set_material(wood_id, texture_coords=[(0.0, 0.0), (x, 0.0), (x, x), (0.0, x)])
self.add_geoms(back_rest)
def generate(self, config):
# create four legs
legs = []
for i in xrange(4):
leg = draw.makeBox(config.leg_thickness,
config.leg_thickness,
config.leg_height)
legs.append(leg)
x_translate_by = config.width - config.leg_thickness
y_translate_by = config.base_length - config.leg_thickness
legs[1].translate((x_translate_by, 0, 0)) # front-right leg
legs[2].translate((0, y_translate_by, 0)) # back-left leg
legs[3].translate((x_translate_by, y_translate_by, 0)) # back-right leg
self.add_geoms(legs)
# create base
base = draw.makeBox(config.width, config.base_length, config.base_thickness)
base.translate((0, 0, config.leg_height))
self.add_geoms(base)
# create back rest
back_rest = draw.makeBox(config.width,
config.back_rest_thickness,
config.back_rest_height)
back_rest.translate((0,
config.base_length - config.back_rest_thickness,
config.leg_height + config.base_thickness))
self.add_geoms(back_rest)
def generate(self, config):
C = config
grass_id = self.get_material('grass', M(texture='textures/grass.jpg'))
bark_id = self.get_material('bark', M(texture='textures/bark.jpg'))
trunk = draw.makeBox(C.diameter/4., C.diameter/4., C.height)
trunk.set_material(bark_id)
self.add_geom(trunk)
length = C.diameter
pnt = (-length/2., -length/2., C.height)
top = draw.makeBox(length, length, length, pnt)
x = self.picker.pick((1.0))
top.set_material(grass_id, texture_coords=[(0.0, 0.0), (x, 0.0), (x, x), (0.0, x)])
self.add_geom(top)
def generate(self, config):
C = config
self.register_materials()
try:
box = draw.makeBox(C.length, C.width, C.height)
except:
print 'length of box too small ', C.length, C.width, C.height
raise
building_id = self.get_material('facade_%s' % C.facade)
size = self.facades[C.facade][-1]
x = C.length/size
y = C.height/size
texture_coords=[(x, 0.0), (x, y), (0.0, y), (0.0, 0.0)]
box.set_material(building_id, 'front', texture_coords)
texture_coords=[(x, 0.0), (x, y), (0.0, y), (0.0, 0.0)]
box.set_material(building_id, 'left', texture_coords)
texture_coords=[(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)]
box.set_material(building_id, 'right', texture_coords)
texture_coords=[(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)]
box.set_material(building_id, 'back', texture_coords)
size = self.terraces[C.terrace][-1]
x = C.length/size
y = C.width/size
texture_coords=[(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)]
terrace_id = self.get_material('terrace_%s' % C.terrace)
box.set_material(terrace_id, 'top', texture_coords)
self.add_geoms(box)
def generate(self, config):
back_rest = draw.makeBox(config.width,
config.back_rest_thickness,
config.back_rest_height)
self.add_geoms(back_rest)
def generate(self, config):
C = config
plate = draw.makeBox(C.length, C.width, 0.2)
sand_id = self.get_material('sand', M(texture='sand.jpg'))
x = self.picker.pick((0.1, 1000.0))
texture_coords=[(0.0, 0.0), (x, 0.0), (x, x), (0.0, x)]
plate.set_material(sand_id, texture_coords=texture_coords)
self.add_geom(plate)
plots = make_plots(self.picker, C.length, C.plot_length_range, C.plot_gap)
if not plots:
return
for origin, length in plots:
if length <= 5 and C.width <= 5:
print 'returning empty plot'
return
building_height = self.picker.pick(C.build_height_range)
print 'plot got ', C.build_height_range, building_height
width = C.width
if length > 5:
length = self.picker.pick((length/2, length))
if C.width > 5:
width = self.picker.pick((width/2, width))
self.subgen('building', origin, length, width, height=building_height)
gap = C.width - width
if gap > 2:
x,y,z = origin
x= x+gap/2
y = y+width+1
self.subgen('tree', (x,y,z))
def generate(self, config):
base = draw.makeBox(config.width, config.base_length, config.base_thickness)
x = self.picker.pick((1.0))
wood_id = self.get_material('grass', M(texture='bark.jpg'))
base.set_material(wood_id, texture_coords=[(0.0, 0.0), (x, 0.0), (x, x), (0.0, x)])
self.add_geoms(base)
def generate(self, config):
C = config
C.num_levels = None
box = draw.makeBox(C.length, C.width, C.height)
self.add_geoms(box)
self.subgen('level1', (0,0,20))
def generate(self, config):
plate_size = .01
grid = Grid(config, self.picker)
grid.generate()
groups = grid.group()
# debug images
grid.generate_image(open('c:/test.png', 'wb'))
grid.generate_groups_image(groups, open('c:/test1.png', 'wb'))
cell_gap = 5
cell_size = config.cell_size
group_length = lambda g: ((g.max_col - g.min_col + 1) * cell_size) - cell_gap
group_width = lambda g: ((g.max_row - g.min_row + 1) * cell_size) - cell_gap
group_x = lambda g: (g.min_col) * cell_size + cell_gap/2
group_y = lambda g: (g.min_row) * cell_size + cell_gap/2
# generate layouts as per groups
for g in groups:
origin = (group_x(g), group_y(g), 0)
length, width = group_length(g), group_width(g)
if g.habitable:
plate = draw.makeBox(length, width, plate_size)
plate.translate((group_x(g), group_y(g), 0))
plate.color = 'dark_brown'
self.add_geom(plate)
self.subgen('sector', origin,
length, width,
level=g.level)
else:
box = draw.makeBox(length, width, plate_size)
box.color = 'green' if g.type == Cell.FOREST else 'blue'
x, y, z = origin
box.translate((x, y, plate_size))
self.add_geom(box)
side = config.size
plate = draw.makeBox(side, side, plate_size)
plate.color = 'black'
plate.translate((0, 0, -2))
self.add_geom(plate)
def generate(self, config):
C = config
twidth = C.trunk_width
halfwidth = twidth / 2.
trunk = draw.makeBox(twidth, twidth, C.height, (-halfwidth, -halfwidth, 0))
self.add_geom(trunk)
self.subgen('cube_top', (0, 0, config.height), config.top_size)
def generate(self, config):
C = config
try:
park = draw.makeBox(C.length, C.width, C.height)
park_id = self.get_material('grass', M(texture='grass.jpg'))
x = self.picker.pick((1.0))
park.set_material(park_id, texture_coords=[(0.0, 0.0), (x, 0.0), (x, x), (0.0, x)])
self.add_geoms(park)
except:
print 'length of box too small ', C.length, C.width, C.height
def generate(self, config):
C = config
plate = draw.makeBox(C.length, C.width, 0.2)
sand_id = self.get_material('sand', M(texture='textures/sand.jpg'))
x = self.picker.pick((0.1, 1000.0))
texture_coords=[(0.0, 0.0), (x, 0.0), (x, x), (0.0, x)]
plate.set_material(sand_id, texture_coords=texture_coords)
self.add_geom(plate)
self.subgen('footpath', (0, 0, 0.25), C.length, C.width, C.pavement)
def generate(self, config):
C = config
road = draw.makeBox(C.width, C.length, 78)
road.visible = False
self.add_geom(road)
s_roads = self.get_intersection()
# print 'got intersections', s_roads
if not s_roads:
road.visible = True
def generate(self, config):
C = config
door = draw.makeBox(C.width, C.thickness*2, C.height)
door.visible = False
door.tags.append('door')
self.add_geom(door)
ps = self.get_enclosing()
geoms = ps.get_geoms(tag='wall')
for geom in geoms:
new_geom = geom.cut(door)
self.replace_geom(geom,new_geom)
def generate(self, config):
C = config
shelf = draw.makeBox(C.length, C.width, C.height)
shelf.tags.append('shelf')
# wood_id = self.get_material('wood', M(texture='BookRack/vikraman.jpg'))
# shelf.set_material(wood_id, texture_coords=[(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)])
self.add_geom(shelf)
self.subgen('rack', (C.length/2, 0, C.height/2), C.length/4., C.width/2, C.height/2.)
def generate(self, config):
C = config
plate = draw.makeBox(C.length, C.width, 0.2)
sand_id = self.get_material('sand', M(texture='sand.jpg'))
x = self.picker.pick((0.1, 1000.0))
texture_coords=[(0.0, 0.0), (x, 0.0), (x, x), (0.0, x)]
plate.set_material(sand_id, texture_coords=texture_coords)
self.add_geom(plate)
building_height = self.picker.pick(C.build_height_range)
print 'calling building **'
self.subgen('building', (0,0,0.2), C.length, C.width,
height=building_height)
def generate(self, config):
back_rest = draw.makeBox(config.width,
config.back_rest_thickness,
config.back_rest_height)
no_of_portions = 2. * config.no_of_holes + 1
bar_width = config.width/no_of_portions
bar_height = config.back_rest_height - (config.back_rest_height/10) * 2
x = 0
for i in range(no_of_portions):
if i%2 != 0:
bar_origin = (x,0,config.back_rest_height/10)
bar = draw.makeBox(bar_width,
config.back_rest_thickness,
bar_height,bar_origin)
back_rest = back_rest.cut(bar)
x = x+bar_width
self.add_geoms(back_rest)
def generate(self, config):
C = config
rack = draw.makeBox(C.length, C.width, C.height)
rack.visible = False
self.add_geom(rack)
ps = self.get_enclosing()
geoms = ps.get_geoms(tag='shelf')
for geom in geoms:
new_geom = geom.cut(rack)
self.replace_geom(geom,new_geom)
def generate(self, config):
C = config
C.num_levels = None
box = draw.makeBox(C.length, C.width, C.height)
building_id = self.get_material('building', M(texture='building.jpg'))
x = C.length/100.0
y = C.height/100.0
box.set_material(building_id, texture_coords=[(x, 0.0), (x, y), (0.0, y), (0.0, 0.0)], face='front')
box.set_material(building_id, texture_coords=[(x, 0.0), (x, y), (0.0, y), (0.0, 0.0)], face='left')
box.set_material(building_id, texture_coords=[(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)], face='right')
box.set_material(building_id, texture_coords=[(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)], face='back')
self.add_geoms(box)
return
def generate(self, config):
C = config
C.num_levels = None
box = draw.makeBox(C.length, C.width, C.height)
building_id = self.get_material('building', M(texture='building.jpg'))
x = C.length/100.0
y = C.height/100.0
box.set_material(building_id, texture_coords=[(x, 0.0), (x, y), (0.0, y), (0.0, 0.0)], face='front')
box.set_material(building_id, texture_coords=[(x, 0.0), (x, y), (0.0, y), (0.0, 0.0)], face='left')
box.set_material(building_id, texture_coords=[(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)], face='right')
box.set_material(building_id, texture_coords=[(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)], face='back')
self.add_geoms(box)
return
num_levels, slab_height, level_height = \
self.compute_height_params(self.picker,
C.height,
C.slab_height,
C.level_height,
C.num_levels)
for i in xrange(num_levels):
zoffset = (slab_height + level_height) * i
slab = draw.makeBox(C.length, C.width, slab_height)
origin = (0, 0, zoffset)
slab.translate(origin)
self.add_geom(slab)
for i in xrange(num_levels):
zoffset = slab_height + \
(slab_height + level_height) * i
origin = (0, 0, zoffset)
self.subgen('level', origin,
C.length, C.width, level_height, None,
C.wall_thickness, C.corridor_length,
C.corridor_width)
def generate(self, config):
C = config
try:
box = draw.makeBox(C.length, C.width, C.height)
building_id = self.get_material('building', M(texture='building.jpg'))
x = C.length/100.0
y = C.height/100.0
box.set_material(building_id, texture_coords=[(x, 0.0), (x, y), (0.0, y), (0.0, 0.0)], face='front')
box.set_material(building_id, texture_coords=[(x, 0.0), (x, y), (0.0, y), (0.0, 0.0)], face='left')
box.set_material(building_id, texture_coords=[(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)], face='right')
box.set_material(building_id, texture_coords=[(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)], face='back')
self.add_geoms(box)
except:
print 'length of box too small ', C.length, C.width, C.height
def generate(self, config):
if config.type == 'square':
leg = draw.makeBox(config.leg_thickness,
config.leg_thickness,
config.leg_height)
elif config.type == 'cylinder':
origin = (config.leg_thickness/2,config.leg_thickness/2,0)
leg = draw.makeCylinder(config.leg_thickness/2,
config.leg_height, origin)
elif config.type == 'triangular':
leg = draw.makePolygon([(config.leg_thickness,0,0),(0,config.leg_thickness,0),(0,0,0)])
leg = leg.extrude((0,0,config.leg_height))
self.add_geoms(leg)
def generate(self, config):
base = draw.makeBox(config.width, config.base_length, config.base_thickness)
smaller = config.width if config.width < config.base_length else config.base_length
center_radius = smaller/10
vertical_center = (config.base_length-config.cover_area)/2
center = (config.width/2,vertical_center,0)
cylinder = draw.makeCylinder(center_radius,
config.base_thickness,
center)
base = base.cut(cylinder)
ell_majorradius = smaller/10
ell_minorradius = smaller/20
e1 = (config.width/2+center_radius+ell_majorradius,vertical_center,0)
eli = draw.Ellipse((0,0,0),ell_majorradius,ell_minorradius)
ellipse = eli.toShape()
ellipse_face = draw.Face(draw.Wire(ellipse.Edges))
ellipse = ellipse_face.extrude((0,0,config.base_thickness))
ellipse1 = ellipse.copy()
ellipse1.translate(e1)
base = base.cut(ellipse1)
e2 = (config.width/2-center_radius-ell_majorradius,vertical_center,0)
ellipse2 = ellipse.copy()
ellipse2.translate(e2)
base = base.cut(ellipse2)
e3 = (config.width/2,vertical_center + center_radius + ell_majorradius, 0)
ellipse3 = ellipse.copy()
aTrsf=draw.Matrix()
aTrsf.rotateZ(math.pi/2) # rotate around the z-axis
ellipse3=ellipse3.transform(aTrsf)
ellipse3.translate(e3)
base = base.cut(ellipse3)
e4 = (config.width/2,vertical_center - center_radius - ell_majorradius, 0)
ellipse4 = ellipse.copy()
ellipse4=ellipse4.transform(aTrsf)
ellipse4.translate(e4)
base = base.cut(ellipse4)
x = self.picker.pick((1.0))
wood_id = self.get_material('grass', M(texture='bark.jpg'))
base.set_material(wood_id, texture_coords=[(0.0, 0.0), (x, 0.0), (x, x), (0.0, x)])
self.add_geoms(base)
def generate(self, config):
if config.type == 'square':
leg = draw.makeBox(config.leg_thickness,
config.leg_thickness,
config.leg_height)
elif config.type == 'cylinder':
origin = (config.leg_thickness/2,config.leg_thickness/2,0)
leg = draw.makeCylinder(config.leg_thickness/2,
config.leg_height, origin)
elif config.type == 'triangular':
leg = draw.makePolygon([(config.leg_thickness,0,0),(0,config.leg_thickness,0),(0,0,0)])
leg = leg.extrude((0,0,config.leg_height))
x = self.picker.pick((1.0))
wood_id = self.get_material('grass', M(texture='bark.jpg'))
leg.set_material(wood_id, texture_coords=[(0.0, 0.0), (x, 0.0), (x, x), (0.0, x)])
self.add_geoms(leg)
def generate(self, config):
C = config
self.register_materials()
plate = draw.makeBox(C.length, C.width, 0.2)
pavement_id = self.get_material('base_%s' % C.pavement)
size = self.pavements[C.pavement][-1]
x = C.length/size
y = C.width/size
plate.set_material(pavement_id, 'front', [(x, 0.0), (x, y), (0.0, y), (0.0, 0.0)])
plate.set_material(pavement_id, 'left', [(x, 0.0), (x, y), (0.0, y), (0.0, 0.0)])
plate.set_material(pavement_id, 'right', [(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)])
plate.set_material(pavement_id, 'back', [(x, y), (0.0, y), (0.0, 0.0), (x, 0.0)])
x = self.picker.pick((0.1, 1000.0))
texture_coords=[(0.0, 0.0), (x, 0.0), (x, x), (0.0, x)]
sand_id = self.get_material('sand', M(texture='textures/sand.jpg'))
plate.set_material(sand_id, 'top', texture_coords)
self.add_geom(plate)
self.subgen('pavement', (0, 0, 0.25), C.length, C.width, C.pavement)
def generate(self, config):
C = config
self.leaves_id = self.get_material('leaves', M(texture='tree\\pine_tree.png'))
bark_id = self.get_material('bark', M(texture='tree\\bark.jpg'))
if C.top_ratio + C.trunk_ratio < 1.0:
C.trunk_ratio = 1.0 - C.top_ratio
trunk_height = C.height * C.trunk_ratio
dia = C.trunk_diameter
trunk = draw.makeBox(dia, dia, trunk_height)
trunk.set_material(bark_id)
trunk.translate((-dia/2., -dia/2., 0))
self.add_geom(trunk)
top_height = C.height * C.top_ratio
lift_height = C.height - top_height
for rotation in (0, math.pi/2, math.pi/4, -math.pi/4):
rotation += .01
plate = self.make_plate(top_height, C.width, lift_height, rotation)
self.add_geoms(*plate)
def generate(self, config):
C = config
divider = draw.makeBox(C.width, C.length, C.height)
self.add_geom(divider)
def generate(self, config):
C = config
main_frame = draw.makeBox(C.length, C.width, C.height)
wheel_cavity = draw.makeCylinder(C.wheel_radius,C.width,(C.front_overhang,0,0),(0,1,0),2*math.pi)
bus = main_frame.cut(wheel_cavity)
wheel_cavity = draw.makeCylinder(C.wheel_radius,C.width,(C.length-C.rear_overhang,0,0),(0,1,0),2*math.pi)
# Here creating a hollow inside the bus
bus_hollow = draw.makeBox(0.9*C.length, 0.9*C.width, 0.9*(C.height-C.wheel_radius),(0.05*C.length,0.05*C.width,C.wheel_radius))
bus = bus.cut(wheel_cavity)
bus=bus.cut(bus_hollow)
# To create a cut in the front side.
cut_cuboid = draw.makeBox(C.width, C.width, C.height-C.wheel_radius,(0,0,C.wheel_radius))
cuboid_transform= draw.Matrix()
cuboid_transform.rotateY(-math.pi/4)
cut_cuboid = cut_cuboid.transform(cuboid_transform)
#C_transform.rotateY(math.pi/4)
#cut_cuboid = cut_cuboid.transform(cuboid_transform)
#self.add_geom(cut_cuboid)
bus = bus.cut(cut_cuboid)
# Calling the Window grill
# self.subgen('WindowGrill',(C.length/4,0,C.wheel_radius),C.length/5,(C.height-C.wheel_radius)-1,.1*(C.width))
window1 = draw.makeBox(C.length/8,C.width,(C.height-C.wheel_radius)-2,(C.length/5,0,C.height-2))
window2 = draw.makeBox(C.length/8,C.width,(C.height-C.wheel_radius)-2,(2*C.length/5,0,C.height-2))
window3 = draw.makeBox(C.length/8,C.width,(C.height-C.wheel_radius)-2,(3*C.length/5,0,C.height-2))
window4 = draw.makeBox(C.length/8,C.width,(C.height-C.wheel_radius)-2,(4*C.length/5,0,C.height-2))
win_transform = draw.Matrix()
#win_transform.rotateX(math.pi/2)
#window = window.transform(win_transform)
#grill1= draw.makeCylinder(C.height/2,C.length,(0,C.height/4,0),(0,1,0))
#grill2 = draw.makeCylinder(C.height/2,C.length,(0,C.height/2,0),(0,1,0))
bus = bus.cut(window1)
bus = bus.cut(window2)
bus = bus.cut(window3)
bus = bus.cut(window4)
#self.add_geom(window)
#self.add_geom(grill1)
#self.add_geom(grill2)
bus_texture = self.get_material('bus_text', M(texture='texture\\bus.jpg'))
bus.set_material(bus_texture)
self.subgen('Wheelset',(C.front_overhang,0,0),C.wheel_radius,C.width)
self.subgen('Wheelset',(C.length-C.rear_overhang,0,0),C.wheel_radius,C.width)
# Adding the window grill
self.subgen('WindowGrill', (C.length/5,0,(C.height-2)+(C.height-C.wheel_radius-2)/2+.25),.05,C.length/8)
self.subgen('WindowGrill', (C.length/5,C.width,(C.height-2)+(C.height-C.wheel_radius-2)/2+.25),.05,C.length/8)
self.subgen('WindowGrill', (C.length/5,0,(C.height-2)+(C.height-C.wheel_radius-2)/2+.5),.05,C.length/8)
self.subgen('WindowGrill', (C.length/5,C.width,(C.height-2)+(C.height-C.wheel_radius-2)/2+.5),.05,C.length/8)
self.subgen('WindowGrill', (2*C.length/5,0,(C.height-2)+(C.height-C.wheel_radius-2)/2+.25),.05,C.length/8)
self.subgen('WindowGrill', (2*C.length/5,C.width,(C.height-2)+(C.height-C.wheel_radius-2)/2+.25),.05,C.length/8)
self.subgen('WindowGrill', (2*C.length/5,0,(C.height-2)+(C.height-C.wheel_radius-2)/2+.5),.05,C.length/8)
self.subgen('WindowGrill', (2*C.length/5,C.width,(C.height-2)+(C.height-C.wheel_radius-2)/2+.5),.05,C.length/8)
self.subgen('WindowGrill', (3*C.length/5,0,(C.height-2)+(C.height-C.wheel_radius-2)/2+.25),.05,C.length/8)
self.subgen('WindowGrill', (3*C.length/5,C.width,(C.height-2)+(C.height-C.wheel_radius-2)/2+.25),.05,C.length/8)
self.subgen('WindowGrill', (3*C.length/5,0,(C.height-2)+(C.height-C.wheel_radius-2)/2+.5),.05,C.length/8)
self.subgen('WindowGrill', (3*C.length/5,C.width,(C.height-2)+(C.height-C.wheel_radius-2)/2+.5),.05,C.length/8)
self.subgen('WindowGrill', (4*C.length/5,0,(C.height-2)+(C.height-C.wheel_radius-2)/2+.25),.05,C.length/8)
self.subgen('WindowGrill', (4*C.length/5,C.width,(C.height-2)+(C.height-C.wheel_radius-2)/2+.25),.05,C.length/8)
self.subgen('WindowGrill', (4*C.length/5,0,(C.height-2)+(C.height-C.wheel_radius-2)/2+.5),.05,C.length/8)
self.subgen('WindowGrill', (4*C.length/5,C.width,(C.height-2)+(C.height-C.wheel_radius-2)/2+.5),.05,C.length/8)
self.add_geom(bus)
def generate(self, config):
base = draw.makeBox(config.width, config.base_length, config.base_thickness)
self.add_geoms(base)
def create_cuboid():
c = draw.makeBox(2, 4, 6)
return c