def __init__(
self,
dbFileName,
folder='',
):
self.dbFileName = dbFileName
self._pm = ProfileManager(self.dbFileName)
self._outDir = os.getcwd() if folder == "" else folder
# make the dir if need be
makeSurePathExists(self._outDir)
def __initRouters():
profile = ProfileManager()
profiles = profile.getAllProfiles()
routers = {}
for routerName in profiles.keys():
print('Initial Router: ', routerName)
if routerName != 'Z':
routers[routerName] = Router(profiles[routerName]['ip'],
profiles[routerName]['port'],
routerName)
routers[routerName].run()
return routers
def __init__(self, dbFileName,
folder='',
):
self.dbFileName = dbFileName
self._pm = ProfileManager(self.dbFileName)
self._outDir = os.getcwd() if folder == "" else folder
# make the dir if need be
makeSurePathExists(self._outDir)
class BinImporter:
"""Used for importing bin assignments"""
def __init__(self,
dbFileName):
self._pm = ProfileManager(dbFileName)
def loadProfile(self, timer):
return self._pm.loadData(timer)
def importBinAssignments(self,
timer,
infile,
separator):
"""Parse assignment file for bin contigs"""
profile = self.loadProfile(timer)
br = BinReader()
# looks like cid->bid
contig_bins = {}
try:
with open(infile, "r") as f:
try:
(con_names, con_bins) = br.parse(f, separator)
(_, con_bid) = np.unique(con_bins, return_inverse=True)
con_bid += 1 # bid zero is unbinned
contig_bins = dict(zip(con_names, con_bid))
except:
print "Error parsing bin assignments"
raise
except:
print "Could not parse bin assignment file:",infile,sys.exc_info()[0]
raise
# now get the internal indices for contigs
for (i, cid) in enumerate(profile.contigNames):
try:
profile.binIds[i] = contig_bins[cid]
except KeyError:
pass
# Now save all the stuff to disk!
print "Saving bins"
self._pm.setBinAssignments(profile, nuke=True)
print " %s" % timer.getTimeStamp()
class BinImporter:
"""Used for importing bin assignments"""
def __init__(self, dbFileName):
self._pm = ProfileManager(dbFileName)
def loadProfile(self, timer):
return self._pm.loadData(timer)
def importBinAssignments(self, timer, infile, separator):
"""Parse assignment file for bin contigs"""
profile = self.loadProfile(timer)
br = BinReader()
# looks like cid->bid
contig_bins = {}
try:
with open(infile, "r") as f:
try:
(con_names, con_bins) = br.parse(f, separator)
(_, con_bid) = np.unique(con_bins, return_inverse=True)
con_bid += 1 # bid zero is unbinned
contig_bins = dict(zip(con_names, con_bid))
except:
print "Error parsing bin assignments"
raise
except:
print "Could not parse bin assignment file:", infile, sys.exc_info(
)[0]
raise
# now get the internal indices for contigs
for (i, cid) in enumerate(profile.contigNames):
try:
profile.binIds[i] = contig_bins[cid]
except KeyError:
pass
# Now save all the stuff to disk!
print "Saving bins"
self._pm.setBinAssignments(profile, nuke=True)
print " %s" % timer.getTimeStamp()
class CoreCreator:
"""Top level class for making bins"""
def __init__(self, dbFileName):
self._pm = ProfileManager(dbFileName)
self._dbFileName = dbFileName
def loadProfile(self, timer, minLength):
return self._pm.loadData(timer,
minLength=minLength,
loadMarkers=True,
loadBins=False)
def run(self,
timer,
minLength,
minSize,
minPts,
savedDistsPrefix="",
keepDists=False,
force=False):
# check that the user is OK with nuking stuff...
if not force and not self._pm.promptOnOverwrite():
return
profile = self.loadProfile(timer,
minLength=minLength
)
if savedDistsPrefix=="":
savedDistsPrefix = self._dbFileName+".dists"
cacher = FileCacher(savedDistsPrefix)
ce = ClassificationClusterEngine(profile,
minPts=minPts,
minSize=minSize,
cacher=cacher,
)
ce.makeBins(timer,
out_bins=profile.binIds,
out_reach_order=profile.reachOrder,
out_reach_dists=profile.reachDists
)
# Now save all the stuff to disk!
print "Saving bins"
self._pm.setReachabilityOrder(profile)
self._pm.setBinAssignments(profile, nuke=True)
print " %s" % timer.getTimeStamp()
# Remove created files
if not keepDists:
try:
cacher.cleanup()
except:
raise
class CoreCreator:
"""Top level class for making bins"""
def __init__(self, dbFileName):
self._pm = ProfileManager(dbFileName)
self._dbFileName = dbFileName
def loadProfile(self, timer, minLength):
return self._pm.loadData(timer,
minLength=minLength,
loadMarkers=True,
loadBins=False)
def run(self,
timer,
minLength,
minSize,
minPts,
savedDistsPrefix="",
keepDists=False,
force=False):
# check that the user is OK with nuking stuff...
if not force and not self._pm.promptOnOverwrite():
return
profile = self.loadProfile(timer, minLength=minLength)
if savedDistsPrefix == "":
savedDistsPrefix = self._dbFileName + ".dists"
cacher = FileCacher(savedDistsPrefix)
ce = ClassificationClusterEngine(
profile,
minPts=minPts,
minSize=minSize,
cacher=cacher,
)
ce.makeBins(timer,
out_bins=profile.binIds,
out_reach_order=profile.reachOrder,
out_reach_dists=profile.reachDists)
# Now save all the stuff to disk!
print "Saving bins"
self._pm.setReachabilityOrder(profile)
self._pm.setBinAssignments(profile, nuke=True)
print " %s" % timer.getTimeStamp()
# Remove created files
if not keepDists:
try:
cacher.cleanup()
except:
raise
def __init__(self, dbFileName, plot=False, force=False, numImgMaps=1):
# worker classes
self.PM = ProfileManager(dbFileName) # store our data
self.BM = BinManager(pm=self.PM) # store our bins
# heat maps
self.numImgMaps = numImgMaps
self.imageMaps = np_zeros((self.numImgMaps, self.PM.scaleFactor, self.PM.scaleFactor))
self.blurredMaps = np_zeros((self.numImgMaps, self.PM.scaleFactor, self.PM.scaleFactor))
# we need a way to reference from the imageMaps back onto the transformed data
self.im2RowIndicies = {}
# When blurring the raw image maps I chose a radius to suit my data, you can vary this as you like
self.blurRadius = 2
self.span = 30 # amount we can travel about when determining "hot spots"
# misc
self.minSize = 10 # Min number of contigs for a bin to be considered legit
self.minVol = 1000000 # Override on the min size, if we have this many BP
self.forceWriting = force
self.debugPlots = plot
self.imageCounter = 1 # when we print many images
self.roundNumber = 0 # how many times have we tried to make a bin?
class ClusterEngine:
"""Top level interface for clustering contigs"""
def __init__(self, dbFileName, plot=False, force=False, numImgMaps=1):
# worker classes
self.PM = ProfileManager(dbFileName) # store our data
self.BM = BinManager(pm=self.PM) # store our bins
# heat maps
self.numImgMaps = numImgMaps
self.imageMaps = np_zeros((self.numImgMaps, self.PM.scaleFactor, self.PM.scaleFactor))
self.blurredMaps = np_zeros((self.numImgMaps, self.PM.scaleFactor, self.PM.scaleFactor))
# we need a way to reference from the imageMaps back onto the transformed data
self.im2RowIndicies = {}
# When blurring the raw image maps I chose a radius to suit my data, you can vary this as you like
self.blurRadius = 2
self.span = 30 # amount we can travel about when determining "hot spots"
# misc
self.minSize = 10 # Min number of contigs for a bin to be considered legit
self.minVol = 1000000 # Override on the min size, if we have this many BP
self.forceWriting = force
self.debugPlots = plot
self.imageCounter = 1 # when we print many images
self.roundNumber = 0 # how many times have we tried to make a bin?
def promptOnOverwrite(self, minimal=False):
"""Check that the user is ok with possibly overwriting the DB"""
if self.PM.isClustered():
if not self.forceWriting:
input_not_ok = True
valid_responses = ["Y", "N"]
vrs = ",".join([str.lower(str(x)) for x in valid_responses])
while input_not_ok:
if minimal:
option = raw_input(" Overwrite? (" + vrs + ") : ")
else:
option = raw_input(
" ****WARNING**** Database: '" + self.PM.dbFileName + "' has already been clustered.\n"
" If you continue you *MAY* overwrite existing bins!\n"
" Overwrite? (" + vrs + ") : "
)
if option.upper() in valid_responses:
print "****************************************************************"
if option.upper() == "N":
print "Operation cancelled"
return False
else:
break
else:
print "Error, unrecognised choice '" + option.upper() + "'"
minimal = True
print "Overwriting database", self.PM.dbFileName
self.PM.dataManager.nukeBins(self.PM.dbFileName)
return True
# ------------------------------------------------------------------------------
# CORE CONSTRUCTION AND MANAGEMENT
def makeCores(self, coreCut, minSize, minVol):
"""Cluster the contigs to make bin cores"""
# check that the user is OK with nuking stuff...
if not self.promptOnOverwrite():
return False
self.minVol = minVol
self.minSize = minSize
# get some data
timer = gtime.TimeKeeper()
self.PM.loadData(condition="length >= " + str(coreCut))
print " %s" % timer.getTimeStamp()
# transform the data
print "Apply data transformations"
self.PM.transformCP()
# plot the transformed space (if we've been asked to...)
if self.debugPlots:
self.PM.renderTransCPData()
print " %s" % timer.getTimeStamp()
# cluster and bin!
print "Create cores"
cum_contigs_used_good = self.initialiseCores()
print " %s" % timer.getTimeStamp()
# condense cores
print "Refine cores [begin: %d]" % len(self.BM.bins)
self.BM.autoRefineBins(iterate=True)
num_binned = len(self.PM.binnedRowIndicies.keys())
perc = "%.2f" % round((float(num_binned) / float(self.PM.numContigs)) * 100, 2)
print " ", num_binned, "contigs across", len(self.BM.bins.keys()), "cores (", perc, "% )"
print " %s" % timer.getTimeStamp()
# Now save all the stuff to disk!
print "Saving bins"
self.BM.saveBins()
print " %s" % timer.getTimeStamp()
def initialiseCores(self):
"""Process contigs and form CORE bins"""
num_below_cutoff = 0 # how many consecutive attempts have produced small bins
breakout_point = 100 # how many will we allow before we stop this loop
# First we need to find the centers of each blob.
# We can make a heat map and look for hot spots
self.populateImageMaps()
sub_counter = 0
print " .... .... .... .... .... .... .... .... .... ...."
print "%4d" % sub_counter,
new_line_counter = 0
num_bins = 0
ss = 0
while num_below_cutoff < breakout_point:
# if(num_bins > 70):
# break
stdout.flush()
# apply a gaussian blur to each image map to make hot spots
# stand out more from the background
self.blurMaps()
# now search for the "hottest" spots on the blurred map
# and check for possible bin centroids
ss += 200
putative_clusters = self.findNewClusterCenters(ss=ss)
if putative_clusters is None:
break
else:
bids_made = []
partitions = putative_clusters[0]
[max_blur_value, max_x, max_y] = putative_clusters[1]
self.roundNumber += 1
sub_round_number = 1
for center_row_indices in partitions:
total_BP = sum([self.PM.contigLengths[i] for i in center_row_indices])
num_contigs = len(center_row_indices)
bin_size = num_contigs
# MM__print "Round: %d tBP: %d tC: %d" % (sub_round_number, total_BP, num_contigs)
if self.isGoodBin(total_BP, num_contigs, ms=5): # Can we trust very small bins?.
# time to make a bin
bin = self.BM.makeNewBin(rowIndices=center_row_indices)
# MM__print "NEW:", total_BP, len(center_row_indices)
# work out the distribution in points in this bin
bin.makeBinDist(
self.PM.transformedCP, self.PM.averageCoverages, self.PM.kmerVals, self.PM.contigLengths
)
# Plot?
if self.debugPlots:
bin.plotBin(
self.PM.transformedCP,
self.PM.contigColours,
self.PM.kmerVals,
fileName="Image_" + str(self.imageCounter),
)
self.imageCounter += 1
# recruit more contigs
bin_size = bin.recruit(
self.PM.transformedCP,
self.PM.averageCoverages,
self.PM.kmerVals,
self.PM.contigLengths,
self.im2RowIndicies,
self.PM.binnedRowIndicies,
self.PM.restrictedRowIndicies,
)
if self.debugPlots:
self.plotHeat(
"HM_%d.%d.png" % (self.roundNumber, sub_round_number),
max=max_blur_value,
x=max_x,
y=max_y,
)
sub_round_number += 1
if self.isGoodBin(self, bin.totalBP, bin_size):
# Plot?
bids_made.append(bin.id)
num_bins += 1
if self.debugPlots:
bin.plotBin(
self.PM.transformedCP,
self.PM.contigColours,
self.PM.kmerVals,
fileName="P_BIN_%d" % (bin.id),
)
# append this bins list of mapped rowIndices to the main list
self.updatePostBin(bin)
num_below_cutoff = 0
new_line_counter += 1
print "% 4d" % bin_size,
else:
# we just throw these indices away for now
self.restrictRowIndicies(bin.rowIndices)
self.BM.deleteBins([bin.id], force=True)
new_line_counter += 1
num_below_cutoff += 1
print str(bin_size).rjust(4, "X"),
else:
# this partition was too small, restrict these guys we don't run across them again
self.restrictRowIndicies(center_row_indices)
num_below_cutoff += 1
# new_line_counter += 1
# print center_row_indices
# print str(bin_size).rjust(4,'Y'),
# make the printing prettier
if new_line_counter > 9:
new_line_counter = 0
sub_counter += 10
print "\n%4d" % sub_counter,
# did we do anything?
num_bids_made = len(bids_made)
if num_bids_made == 0:
# nuke the lot!
for row_indices in partitions:
self.restrictRowIndicies(row_indices)
print "\n .... .... .... .... .... .... .... .... .... ...."
# now we need to update the PM's binIds
bids = self.BM.getBids()
for bid in bids:
for row_index in self.BM.bins[bid].rowIndices:
self.PM.binIds[row_index] = bid
def isGoodBin(self, totalBP, binSize, ms=0):
"""Does this bin meet my exacting requirements?"""
if ms == 0:
ms = self.minSize # let the user choose
if totalBP < self.minVol: # less than the good volume
if binSize > ms: # but has enough contigs
return True
else: # contains enough bp to pass regardless of number of contigs
return True
return False
def findNewClusterCenters(self, ss=0):
"""Find a putative cluster"""
inRange = lambda x, l, u: x >= l and x < u
# we work from the top view as this has the base clustering
max_index = np_argmax(self.blurredMaps[0])
max_value = self.blurredMaps[0].ravel()[max_index]
max_x = int(max_index / self.PM.scaleFactor)
max_y = max_index - self.PM.scaleFactor * max_x
max_z = -1
ret_values = [max_value, max_x, max_y]
start_span = int(1.5 * self.span)
span_len = 2 * start_span + 1
if self.debugPlots:
self.plotRegion(max_x, max_y, max_z, fileName="Image_" + str(self.imageCounter), tag="column", column=True)
self.imageCounter += 1
# make a 3d grid to hold the values
working_block = np_zeros((span_len, span_len, self.PM.scaleFactor))
# go through the entire column
(x_lower, x_upper) = self.makeCoordRanges(max_x, start_span)
(y_lower, y_upper) = self.makeCoordRanges(max_y, start_span)
super_putative_row_indices = []
for p in self.im2RowIndicies:
if inRange(p[0], x_lower, x_upper) and inRange(p[1], y_lower, y_upper):
for row_index in self.im2RowIndicies[p]:
# check that the point is real and that it has not yet been binned
if row_index not in self.PM.binnedRowIndicies and row_index not in self.PM.restrictedRowIndicies:
# this is an unassigned point.
multiplier = np_log10(self.PM.contigLengths[row_index])
self.incrementAboutPoint3D(
working_block, p[0] - x_lower, p[1] - y_lower, p[2], multiplier=multiplier
)
super_putative_row_indices.append(row_index)
# blur and find the highest value
bwb = ndi.gaussian_filter(working_block, 8) # self.blurRadius)
densest_index = np_unravel_index(np_argmax(bwb), (np_shape(bwb)))
max_x = densest_index[0] + x_lower
max_y = densest_index[1] + y_lower
max_z = densest_index[2]
# now get the basic color of this dense point
putative_center_row_indices = []
(x_lower, x_upper) = self.makeCoordRanges(max_x, self.span)
(y_lower, y_upper) = self.makeCoordRanges(max_y, self.span)
(z_lower, z_upper) = self.makeCoordRanges(max_z, 2 * self.span)
for row_index in super_putative_row_indices:
p = np_around(self.PM.transformedCP[row_index])
if inRange(p[0], x_lower, x_upper) and inRange(p[1], y_lower, y_upper) and inRange(p[2], z_lower, z_upper):
# we are within the range!
putative_center_row_indices.append(row_index)
# make sure we have something to go on here
if np_size(putative_center_row_indices) == 0:
# it's all over!
return None
if np_size(putative_center_row_indices) == 1:
# get out of here but keep trying
# the calling function may restrict these indices
return [[np_array(putative_center_row_indices)], ret_values]
else:
total_BP = sum([self.PM.contigLengths[i] for i in putative_center_row_indices])
if not self.isGoodBin(total_BP, len(putative_center_row_indices), ms=5): # Can we trust very small bins?.
# get out of here but keep trying
# the calling function should restrict these indices
return [[np_array(putative_center_row_indices)], ret_values]
else:
# we've got a few good guys here, partition them up!
# shift these guys around a bit
center_k_vals = np_array([self.PM.kmerVals[i] for i in putative_center_row_indices])
k_partitions = self.partitionVals(center_k_vals)
if len(k_partitions) == 0:
return None
else:
center_c_vals = np_array([self.PM.transformedCP[i][-1] for i in putative_center_row_indices])
# center_c_vals = np_array([self.PM.averageCoverages[i] for i in putative_center_row_indices])
center_c_vals -= np_min(center_c_vals)
c_max = np_max(center_c_vals)
if c_max != 0:
center_c_vals /= c_max
c_partitions = self.partitionVals(center_c_vals)
# take the intersection of the two partitions
tmp_partition_hash_1 = {}
id = 1
for p in k_partitions:
for i in p:
tmp_partition_hash_1[i] = id
id += 1
tmp_partition_hash_2 = {}
id = 1
for p in c_partitions:
for i in p:
try:
tmp_partition_hash_2[(tmp_partition_hash_1[i], id)].append(i)
except KeyError:
tmp_partition_hash_2[(tmp_partition_hash_1[i], id)] = [i]
id += 1
partitions = [
np_array([putative_center_row_indices[i] for i in tmp_partition_hash_2[key]])
for key in tmp_partition_hash_2.keys()
]
# pcs = [[self.PM.averageCoverages[i] for i in p] for p in partitions]
# print pcs
return [partitions, ret_values]
def expandSelection(self, startIndex, vals, stdevCutoff=0.05, maxSpread=0.1):
"""Expand a selection left and right from a staring index in a list of values
Keep expanding unless the stdev of the values goes above the cutoff
Return a list of indices into the original list
"""
ret_list = [startIndex] # this is what we will give back
start_val = vals[startIndex]
value_store = [start_val]
sorted_indices = np_argsort(vals)
max_index = len(vals)
# set the upper and lower to point to the position
# where the start resides
lower_index = 0
upper_index = 0
for i in range(max_index):
if sorted_indices[i] == startIndex:
break
lower_index += 1
upper_index += 1
do_lower = True
do_upper = True
max_index -= 1
while do_lower or do_upper:
if do_lower:
do_lower = False
if lower_index > 0:
try_val = vals[sorted_indices[lower_index - 1]]
if np_abs(try_val - start_val) < maxSpread:
try_array = value_store + [try_val]
if np_std(try_array) < stdevCutoff:
value_store = try_array
lower_index -= 1
ret_list.append(sorted_indices[lower_index])
do_lower = True
if do_upper:
do_upper = False
if upper_index < max_index:
try_val = vals[sorted_indices[upper_index + 1]]
if np_abs(try_val - start_val) < maxSpread:
try_array = value_store + [try_val]
if np_std(try_array) < stdevCutoff:
value_store = try_array
upper_index += 1
ret_list.append(sorted_indices[upper_index])
do_upper = True
return sorted(ret_list)
def partitionVals(self, vals, stdevCutoff=0.04, maxSpread=0.15):
"""Work out where shifts in kmer/coverage vals happen"""
partitions = []
working_list = list(vals)
fix_dict = dict(zip(range(len(working_list)), range(len(working_list))))
while len(working_list) > 2:
cf = CenterFinder()
c_index = cf.findArrayCenter(working_list)
expanded_indices = self.expandSelection(c_index, working_list, stdevCutoff=stdevCutoff, maxSpread=maxSpread)
# fix any munges from previous deletes
morphed_indices = [fix_dict[i] for i in expanded_indices]
partitions.append(morphed_indices)
# shunt the indices to remove down!
shunted_indices = []
for offset, index in enumerate(expanded_indices):
shunted_indices.append(index - offset)
# print "FD:", fix_dict
# print "EI:", expanded_indices
# print "MI:", morphed_indices
# print "SI:", shunted_indices
# make an updated working list and fix the fix dict
nwl = []
nfd = {}
shifter = 0
for i in range(len(working_list) - len(shunted_indices)):
# print "================="
if len(shunted_indices) > 0:
# print i, shunted_indices[0], shifter
if i >= shunted_indices[0]:
tmp = shunted_indices.pop(0)
shifter += 1
# consume any and all conseqs
while len(shunted_indices) > 0:
if shunted_indices[0] == tmp:
shunted_indices.pop(0)
shifter += 1
else:
break
# else:
# print i, "_", shifter
nfd[i] = fix_dict[i + shifter]
nwl.append(working_list[i + shifter])
# print nfd
# print nwl
fix_dict = nfd
working_list = nwl
if len(working_list) > 0:
partitions.append(fix_dict.values())
return partitions
# ------------------------------------------------------------------------------
# CORE MANAGEMENT
def condenseCores(self, auto=False):
"""Itterative wrapper for the BinManager method"""
condensing_round = 0
num_cores_condensed = 0
while True: # do while loop anyone?
condensing_round += 1
(num_cores_condensed, continue_merge) = self.BM.condenseBins(verbose=True, auto=auto)
if num_cores_condensed == 0:
break
else:
print " Core condensing round:", condensing_round, "Incorporated", num_cores_condensed, "cores into larger cores"
num_binned = len(self.PM.binnedRowIndicies.keys())
perc = "%.2f" % round((float(num_binned) / float(self.PM.numContigs)) * 100, 2)
print " ", num_binned, "contigs are distributed across", len(self.BM.bins.keys()), "cores (", perc, "% )"
return
def removeOutliersWrapper(self, mode="kmer"):
"""remove the outliers for all bins"""
print " Removing outliers"
for bid in self.BM.bins:
self.removeOutliers(bid, mode=mode)
def removeOutliers(self, bid, fixBinnedRI=True, mode="kmer"):
"""remove outliers for a single bin"""
dead_row_indices = self.BM.bins[bid].findOutliers(self.PM.transformedCP, self.PM.kmerVals, mode=mode)
if len(dead_row_indices) > 0:
if fixBinnedRI:
for row_index in dead_row_indices:
self.setRowIndexUnassigned(row_index)
self.BM.bins[bid].purge(
dead_row_indices,
self.PM.transformedCP,
self.PM.averageCoverages,
self.PM.kmerVals,
self.PM.contigLengths,
self.PM.kmerVals,
)
# ------------------------------------------------------------------------------
# DATA MAP MANAGEMENT
def populateImageMaps(self):
"""Load the transformed data into the main image maps"""
# reset these guys... JIC
self.imageMaps = np_zeros((self.numImgMaps, self.PM.scaleFactor, self.PM.scaleFactor))
self.im2RowIndicies = {}
# add to the grid wherever we find a contig
row_index = -1
for point in np_around(self.PM.transformedCP):
row_index += 1
# can only bin things once!
if row_index not in self.PM.binnedRowIndicies and row_index not in self.PM.restrictedRowIndicies:
# add to the row_index dict so we can relate the
# map back to individual points later
p = tuple(point)
if p in self.im2RowIndicies:
self.im2RowIndicies[p].append(row_index)
else:
self.im2RowIndicies[p] = [row_index]
# now increment in the grid
# for each point we encounter we incrmement
# it's position + the positions to each side
# and touching each corner
self.incrementViaRowIndex(row_index, p)
def incrementViaRowIndex(self, rowIndex, point=None):
"""Wrapper to increment about point"""
if point is None:
point = tuple(np_around(self.PM.transformedCP[rowIndex]))
# px = point[0]
# py = point[1]
# pz = point[2]
multiplier = np_log10(self.PM.contigLengths[rowIndex])
self.incrementAboutPoint(0, point[0], point[1], multiplier=multiplier)
if self.numImgMaps > 1:
self.incrementAboutPoint(1, self.PM.scaleFactor - point[2] - 1, point[1], multiplier=multiplier)
self.incrementAboutPoint(
2, self.PM.scaleFactor - point[2] - 1, self.PM.scaleFactor - point[0] - 1, multiplier=multiplier
)
def decrementViaRowIndex(self, rowIndex, point=None):
"""Wrapper to decrement about point"""
if point is None:
point = tuple(np_around(self.PM.transformedCP[rowIndex]))
# px = point[0]
# py = point[1]
# pz = point[2]
multiplier = np_log10(self.PM.contigLengths[rowIndex])
self.decrementAboutPoint(0, point[0], point[1], multiplier=multiplier)
if self.numImgMaps > 1:
self.decrementAboutPoint(1, self.PM.scaleFactor - point[2] - 1, point[1], multiplier=multiplier)
self.decrementAboutPoint(
2, self.PM.scaleFactor - point[2] - 1, self.PM.scaleFactor - point[0] - 1, multiplier=multiplier
)
def incrementAboutPoint(self, view_index, px, py, valP=1, valS=0.6, valC=0.2, multiplier=1):
"""Increment value at a point in the 2D image maps
Increment point by valP, increment neighbouring points at the
sides and corners of the target point by valS and valC
multiplier is proportional to the contigs length
"""
valP *= multiplier
valS *= multiplier
valC *= multiplier
if px > 0:
if py > 0:
self.imageMaps[view_index, px - 1, py - 1] += valC # Top left corner
self.imageMaps[view_index, px - 1, py] += valS # Top
if py < self.PM.scaleFactor - 1:
self.imageMaps[view_index, px - 1, py + 1] += valC # Top right corner
if py > 0:
self.imageMaps[view_index, px, py - 1] += valS # Left side
self.imageMaps[view_index, px, py] += valP # Point
if py < self.PM.scaleFactor - 1:
self.imageMaps[view_index, px, py + 1] += valS # Right side
if px < self.PM.scaleFactor - 1:
if py > 0:
self.imageMaps[view_index, px + 1, py - 1] += valC # Bottom left corner
self.imageMaps[view_index, px + 1, py] += valS # Bottom
if py < self.PM.scaleFactor - 1:
self.imageMaps[view_index, px + 1, py + 1] += valC # Bottom right corner
def decrementAboutPoint(self, view_index, px, py, valP=1, valS=0.6, valC=0.2, multiplier=1):
"""Decrement value at a point in the 2D image maps
multiplier is proportional to the contigs length
"""
valP *= multiplier
valS *= multiplier
valC *= multiplier
if px > 0:
if py > 0:
self.safeDecrement(self.imageMaps[view_index], px - 1, py - 1, valC) # Top left corner
self.safeDecrement(self.imageMaps[view_index], px - 1, py, valS) # Top
if py < self.PM.scaleFactor - 1:
self.safeDecrement(self.imageMaps[view_index], px - 1, py + 1, valC) # Top right corner
if py > 0:
self.safeDecrement(self.imageMaps[view_index], px, py - 1, valS) # Left side
self.safeDecrement(self.imageMaps[view_index], px, py, valP) # Point
if py < self.PM.scaleFactor - 1:
self.safeDecrement(self.imageMaps[view_index], px, py + 1, valS) # Right side
if px < self.PM.scaleFactor - 1:
if py > 0:
self.safeDecrement(self.imageMaps[view_index], px + 1, py - 1, valC) # Bottom left corner
self.safeDecrement(self.imageMaps[view_index], px + 1, py, valS) # Bottom
if py < self.PM.scaleFactor - 1:
self.safeDecrement(self.imageMaps[view_index], px + 1, py + 1, valC) # Bottom right corner
def safeDecrement(self, map, px, py, value):
"""Decrement a value and make sure it's not negative or something shitty"""
map[px][py] -= value
if map[px][py] < np_finfo(float).eps:
map[px][py] = 0
def incrementAboutPoint3D(self, workingBlock, px, py, pz, vals=(6.4, 4.9, 2.5, 1.6), multiplier=1):
"""Increment a point found in a 3D column
used when finding the centroid of a hot area
update the 26 points which surround the centre point
z spans the height of the entire column, x and y have been offset to
match the column subspace
multiplier is proportional to the contigs length
"""
valsM = [x * multiplier for x in vals]
# top slice
if pz < self.PM.scaleFactor - 1:
self.subIncrement3D(workingBlock, px, py, pz + 1, valsM, 1)
# center slice
self.subIncrement3D(workingBlock, px, py, pz, valsM, 0)
# bottom slice
if pz > 0:
self.subIncrement3D(workingBlock, px, py, pz - 1, valsM, 1)
def subIncrement3D(self, workingBlock, px, py, pz, vals, offset):
"""AUX: Called from incrementAboutPoint3D does but one slice
multiplier is proportional to the contigs length
"""
# get the size of the working block
shape = np_shape(workingBlock)
if px > 0:
if py > 0:
workingBlock[px - 1, py - 1, pz] += vals[offset + 2] # Top left corner
workingBlock[px - 1, py, pz] += vals[offset + 1] # Top
if py < shape[1] - 1:
workingBlock[px - 1, py + 1, pz] += vals[offset + 2] # Top right corner
if py > 0:
workingBlock[px, py - 1, pz] += vals[offset + 1] # Left side
workingBlock[px, py, pz] += vals[offset] # Point
if py < shape[1] - 1:
workingBlock[px, py + 1, pz] += vals[offset + 1] # Right side
if px < shape[0] - 1:
if py > 0:
workingBlock[px + 1, py - 1, pz] += vals[offset + 2] # Bottom left corner
workingBlock[px + 1, py, pz] += vals[offset + 1] # Bottom
if py < shape[1] - 1:
workingBlock[px + 1, py + 1, pz] += vals[offset + 2] # Bottom right corner
def blurMaps(self):
"""Blur the 2D image maps"""
self.blurredMaps = np_zeros((self.numImgMaps, self.PM.scaleFactor, self.PM.scaleFactor))
for i in range(self.numImgMaps): # top, front and side
self.blurredMaps[i, :, :] = ndi.gaussian_filter(self.imageMaps[i, :, :], 8) # self.blurRadius)
def makeCoordRanges(self, pos, span):
"""Make search ranges which won't go out of bounds"""
lower = pos - span
upper = pos + span + 1
if lower < 0:
lower = 0
if upper > self.PM.scaleFactor:
upper = self.PM.scaleFactor
return (lower, upper)
def updatePostBin(self, bin):
"""Update data structures after assigning contigs to a new bin"""
for row_index in bin.rowIndices:
self.setRowIndexAssigned(row_index)
def setRowIndexAssigned(self, rowIndex):
"""fix the data structures to indicate that rowIndex belongs to a bin
Use only during initial core creation
"""
if rowIndex not in self.PM.restrictedRowIndicies and rowIndex not in self.PM.binnedRowIndicies:
self.PM.binnedRowIndicies[rowIndex] = True
# now update the image map, decrement
self.decrementViaRowIndex(rowIndex)
def setRowIndexUnassigned(self, rowIndex):
"""fix the data structures to indicate that rowIndex no longer belongs to a bin
Use only during initial core creation
"""
if rowIndex in self.PM.restrictedRowIndicies and rowIndex not in self.PM.binnedRowIndicies:
del self.PM.binnedRowIndicies[rowIndex]
# now update the image map, increment
self.incrementViaRowIndex(rowIndex)
def restrictRowIndicies(self, indices):
"""Add these indices to the restricted list"""
for row_index in indices:
# check that it's not binned or already restricted
if row_index not in self.PM.restrictedRowIndicies and row_index not in self.PM.binnedRowIndicies:
self.PM.restrictedRowIndicies[row_index] = True
# now update the image map, decrement
self.decrementViaRowIndex(row_index)
# ------------------------------------------------------------------------------
# IO and IMAGE RENDERING
def plotRegion(self, px, py, pz, fileName="", tag="", column=False):
"""Plot the region surrounding a point """
import matplotlib as mpl
disp_vals = np_array([])
disp_cols = np_array([])
num_points = 0
# plot all points within span
(z_lower, z_upper) = self.makeCoordRanges(pz, self.span)
if column:
z_lower = 0
z_upper = self.PM.scaleFactor - 1
(x_lower, x_upper) = self.makeCoordRanges(px, self.span)
(y_lower, y_upper) = self.makeCoordRanges(py, self.span)
for z in range(z_lower, z_upper):
realz = self.PM.scaleFactor - z - 1
for x in range(x_lower, x_upper):
for y in range(y_lower, y_upper):
if (x, y, realz) in self.im2RowIndicies:
for row_index in self.im2RowIndicies[(x, y, realz)]:
if (
row_index not in self.PM.binnedRowIndicies
and row_index not in self.PM.restrictedRowIndicies
):
num_points += 1
disp_vals = np_append(disp_vals, self.PM.transformedCP[row_index])
disp_cols = np_append(disp_cols, self.PM.contigColours[row_index])
# make a black mark at the max values
small_span = self.span / 2
(x_lower, x_upper) = self.makeCoordRanges(px, small_span)
(y_lower, y_upper) = self.makeCoordRanges(py, small_span)
(z_lower, z_upper) = self.makeCoordRanges(pz, small_span)
for z in range(z_lower, z_upper):
realz = self.PM.scaleFactor - z - 1
for x in range(x_lower, x_upper):
for y in range(y_lower, y_upper):
if (x, y, realz) in self.im2RowIndicies:
for row_index in self.im2RowIndicies[(x, y, realz)]:
if (
row_index not in self.PM.binnedRowIndicies
and row_index not in self.PM.restrictedRowIndicies
):
num_points += 1
disp_vals = np_append(disp_vals, self.PM.transformedCP[row_index])
disp_cols = np_append(disp_cols, htr(0, 0, 0))
# reshape
disp_vals = np_reshape(disp_vals, (num_points, 3))
disp_cols = np_reshape(disp_cols, (num_points, 3))
fig = plt.figure()
ax = fig.add_subplot(111, projection="3d")
cm = mpl.colors.LinearSegmentedColormap("my_colormap", disp_cols, 1024)
result = ax.scatter(
disp_vals[:, 0], disp_vals[:, 1], disp_vals[:, 2], edgecolors=disp_cols, c=disp_cols, cmap=cm, marker="."
)
title = str.join(" ", ["Focus at: (", str(px), str(py), str(self.PM.scaleFactor - pz - 1), ")\n", tag])
plt.title(title)
if fileName != "":
fig.set_size_inches(6, 6)
plt.savefig(fileName, dpi=300)
elif show:
plt.show()
plt.close(fig)
del fig
def plotHeat(self, fileName="", max=-1, x=-1, y=-1):
"""Print the main heat maps
Useful for debugging
"""
fig = plt.figure()
images = []
ax = None
if self.numImgMaps == 1:
ax = fig.add_subplot(121)
images.append(ax.imshow(self.blurredMaps[0, :, :] ** 0.5))
if max > 0:
title = "Max value: %f (%f, %f)" % (max, x, y)
plt.title(title)
else:
ax = fig.add_subplot(231)
images.append(ax.imshow(self.blurredMaps[0, :, :] ** 0.5))
if max > 0:
title = str.join(" ", ["Max value:", str(max)])
plt.title(title)
ax = fig.add_subplot(232)
images.append(ax.imshow(self.blurredMaps[1, :, :] ** 0.5))
ax = fig.add_subplot(233)
images.append(ax.imshow(self.blurredMaps[2, :, :] ** 0.5))
if self.numImgMaps == 1:
ax = fig.add_subplot(122)
images.append(ax.imshow(self.imageMaps[0, :, :] ** 0.5))
else:
ax = fig.add_subplot(234)
images.append(ax.imshow(self.imageMaps[0, :, :] ** 0.5))
ax = fig.add_subplot(235)
images.append(ax.imshow(self.imageMaps[1, :, :] ** 0.5))
ax = fig.add_subplot(236)
images.append(ax.imshow(self.imageMaps[2, :, :] ** 0.5))
if fileName != "":
if self.numImgMaps == 1:
fig.set_size_inches(12, 6)
else:
fig.set_size_inches(18, 18)
plt.savefig(fileName, dpi=300)
elif show:
plt.show()
plt.close(fig)
del fig
def __createProfiles():
profileManager = ProfileManager()
# ------------- Minimal Network -------------
# profileManager.removeProfile('D')
# profileManager.removeProfile('E')
# profileManager.removeProfile('F')
# profileManager.addAndUpdateProfile('A', '127.0.0.1', ['192.168.1.0/24', '192.168.4.0/24'], 4000, ['B'])
# profileManager.addAndUpdateProfile('B', '127.0.0.1', ['192.168.2.0/24'], 4001, ['A', 'C'])
# profileManager.addAndUpdateProfile('C', '127.0.0.1', ['192.168.3.0/24', '192.168.2.0/24'], 4002, ['B'])
# ------------- Large Network -------------
profileManager.removeProfile('A')
profileManager.removeProfile('B')
profileManager.removeProfile('C')
profileManager.addAndUpdateProfile('A', '127.0.0.1',
['192.168.1.0/24', '192.168.4.0/24'],
4000, ['B', 'D'])
profileManager.addAndUpdateProfile('B', '127.0.0.1', ['192.168.2.0/24'],
4001, ['A', 'C', 'D'])
profileManager.addAndUpdateProfile('C', '127.0.0.1',
['192.168.2.0/24', '192.168.3.0/24'],
4002, ['B', 'F'])
profileManager.addAndUpdateProfile('D', '127.0.0.1', ['192.168.4.0/24'],
4003, ['A', 'B', 'E'])
profileManager.addAndUpdateProfile('E', '127.0.0.1', ['192.168.6.0/24'],
4004, ['D', 'F'])
profileManager.addAndUpdateProfile('F', '127.0.0.1', ['192.168.5.0/24'],
4005, ['C', 'E'])
profileManager.getAllProfiles()
class BinStatsDumper:
def __init__(self, dbFileName):
self.dbFileName = dbFileName
self._pm = ProfileManager(self.dbFileName)
def loadProfile(self, timer):
return self._pm.loadData(
timer,
loadMarkers=True,
loadBins=True,
bids=[0],
removeBins=True,
)
def dumpBinStats(self, timer, fields, outFile, separator, useHeaders):
"""Compute bin statistics"""
# load all the contigs which have been assigned to bins
profile = self.loadProfile(timer)
bm = BinManager(profile)
stats = bm.getBinStats()
#data to output
header_strings = []
data_arrays = []
data_converters = []
for field in fields:
if field == 'bins':
header_strings.append('bid')
data_arrays.append(stats.bids)
data_converters.append(lambda x: str(x))
elif field == 'points':
header_strings.append('num_contigs')
data_arrays.append(stats.numContigs)
data_converters.append(lambda x: str(x))
elif field == 'sizes':
header_strings.append('size')
data_arrays.append(stats.sizes)
data_converters.append(lambda x: str(x))
elif field == 'lengths':
header_strings.append('length_min')
header_strings.append('length_median')
header_strings.append('length_max')
data_arrays.append(stats.lengthRanges[:, 0])
data_arrays.append(stats.lengthMedians)
data_arrays.append(stats.lengthRanges[:, 1])
data_converters.append(lambda x: str(x))
data_converters.append(lambda x: str(x))
data_converters.append(lambda x: str(x))
elif field == 'gc':
header_strings.append("GC%_mean")
header_strings.append("GC%_std")
data_arrays.append(stats.GCMeans)
data_arrays.append(stats.GCStdDevs)
data_converters.append(lambda x: "%0.4f" % x)
data_converters.append(lambda x: "%0.4f" % x)
elif field == 'coverage':
stoits = profile.stoitNames
header_strings.append(
separator.join([
separator.join([i + "_mean", i + "_std"])
for i in stoits
]))
interleaved = np.dsplit(
np.transpose(np.dstack((stats.covMeans, stats.covStdDevs)),
axes=[0, 2, 1]))
data_arrays.append(interleaved)
data_converters.append(lambda x: separator.join(
["%0.4f" + separator + "%0.4f" % i for i in x]))
elif field == 'tags':
header_strings.append('taxonomy')
data_arrays.append(stats.tags)
data_converters.append(lambda x: x)
# now print out the sequences
try:
with open(outFile, 'w') as f:
if useHeaders:
header = separator.join(header_strings) + '\n'
f.write(header)
num_rows = len(data_arrays[0])
for i in range(num_rows):
row = separator.join([
conv(arr[i])
for (conv, arr) in zip(data_converters, data_arrays)
])
f.write(row + '\n')
except:
print "Could not open file for writing:", outFile, sys.exc_info(
)[0]
raise
class BinExtractor:
"""Used for extracting reads and contigs based on bin assignments"""
def __init__(self, dbFileName,
folder='',
):
self.dbFileName = dbFileName
self._pm = ProfileManager(self.dbFileName)
self._outDir = os.getcwd() if folder == "" else folder
# make the dir if need be
makeSurePathExists(self._outDir)
def loadProfile(self, timer, bids=[], cutoff=0):
removeBins = bids is None or bids == []
return self._pm.loadData(timer,
loadMarkers=False,
loadBins=True,
bids=[0] if removeBins else bids,
removeBins=removeBins,
minLength=cutoff
)
def extractContigs(self,
timer,
bids=[],
fasta=[],
prefix='',
cutoff=0):
"""Extract contigs and write to file"""
if prefix is None or prefix == '':
prefix=os.path.basename(self.dbFileName) \
.replace(".gm", "") \
.replace(".sm", "")
profile = self.loadProfile(timer, bids, cutoff)
bm = BinManager(profile)
# load all the contigs which have been assigned to bins
cp = ContigParser()
# contigs looks like cid->seq
contigs = {}
import mimetypes
try:
for file_name in fasta:
gm_open = open
try:
# handle gzipped files
mime = mimetypes.guess_type(file_name)
if mime[1] == 'gzip':
import gzip
gm_open = gzip.open
except:
print "Error when guessing contig file mimetype"
raise
with gm_open(file_name, "r") as f:
cp.getWantedSeqs(f, profile.contigNames, out_dict=contigs)
except:
print "Could not parse contig file:",fasta[0],sys.exc_info()[0]
raise
# now print out the sequences
print "Writing files"
for bid in bm.getBids():
file_name = os.path.join(self._outDir, "%s_bin_%d.fna" % (prefix, bid))
try:
with open(file_name, 'w') as f:
for cid in bm.profile.contigNames[bm.getBinIndices(bid)]:
if(cid in contigs):
f.write(">%s\n%s\n" % (cid, contigs[cid]))
else:
print "These are not the contigs you're looking for. ( %s )" % (cid)
except:
print "Could not open file for writing:",file_name,sys.exc_info()[0]
raise
def extractReads(self,
timer,
bids=[],
bams=[],
prefix="",
mixBams=False,
mixGroups=False,
mixReads=False,
interleaved=False,
bigFile=False,
headersOnly=False,
minMapQual=0,
maxMisMatches=1000,
useSuppAlignments=False,
useSecondaryAlignments=False,
threads=1,
verbose=False):
"""Extract reads from bam files and write to file
All logic is handled by BamM <- soon to be wrapped by StoreM"""
# load data
profile = self.loadProfile(timer, bids)
bm = BinManager(profile) # bins
print "Extracting reads"
# work out a set of targets to pass to the parser
targets = []
group_names = []
for bid in bm.getBids():
group_names.append("BIN_%d" % bid)
row_indices = bm.getBinIndices(bid)
targets.append(list(bm.profile.contigNames[row_indices]))
# get something to parse the bams with
bam_parser = BMBE(targets,
bams,
groupNames=group_names,
prefix=prefix,
outFolder=self._outDir,
mixBams=mixBams,
mixGroups=mixGroups,
mixReads=mixReads,
interleaved=interleaved,
bigFile=bigFile,
headersOnly=headersOnly,
minMapQual=minMapQual,
maxMisMatches=maxMisMatches,
useSuppAlignments=useSuppAlignments,
useSecondaryAlignments=useSecondaryAlignments)
bam_parser.extract(threads=threads,
verbose=verbose)
class BinStatsDumper:
def __init__(self,
dbFileName):
self.dbFileName = dbFileName
self._pm = ProfileManager(self.dbFileName)
def loadProfile(self, timer):
return self._pm.loadData(timer,
loadMarkers=True,
loadBins=True,
bids=[0],
removeBins=True,
)
def dumpBinStats(self,
timer,
fields,
outFile,
separator,
useHeaders
):
"""Compute bin statistics"""
# load all the contigs which have been assigned to bins
profile = self.loadProfile(timer)
bm = BinManager(profile)
stats = bm.getBinStats()
#data to output
header_strings = []
data_arrays = []
data_converters = []
for field in fields:
if field == 'bins':
header_strings.append('bid')
data_arrays.append(stats.bids)
data_converters.append(lambda x: str(x))
elif field == 'points':
header_strings.append('num_contigs')
data_arrays.append(stats.numContigs)
data_converters.append(lambda x: str(x))
elif field == 'sizes':
header_strings.append('size')
data_arrays.append(stats.sizes)
data_converters.append(lambda x: str(x))
elif field == 'lengths':
header_strings.append('length_min')
header_strings.append('length_median')
header_strings.append('length_max')
data_arrays.append(stats.lengthRanges[:,0])
data_arrays.append(stats.lengthMedians)
data_arrays.append(stats.lengthRanges[:,1])
data_converters.append(lambda x: str(x))
data_converters.append(lambda x: str(x))
data_converters.append(lambda x: str(x))
elif field == 'gc':
header_strings.append("GC%_mean")
header_strings.append("GC%_std")
data_arrays.append(stats.GCMeans)
data_arrays.append(stats.GCStdDevs)
data_converters.append(lambda x : "%0.4f" % x)
data_converters.append(lambda x : "%0.4f" % x)
elif field == 'coverage':
stoits = profile.stoitNames
header_strings.append(separator.join([separator.join([i + "_mean", i + "_std"]) for i in stoits]))
interleaved = np.dsplit(np.transpose(np.dstack((stats.covMeans, stats.covStdDevs)), axes=[0, 2, 1]))
data_arrays.append(interleaved)
data_converters.append(lambda x: separator.join(["%0.4f"+separator+"%0.4f" % i for i in x]))
elif field == 'tags':
header_strings.append('taxonomy')
data_arrays.append(stats.tags)
data_converters.append(lambda x: x)
# now print out the sequences
try:
with open(outFile, 'w') as f:
if useHeaders:
header = separator.join(header_strings) + '\n'
f.write(header)
num_rows = len(data_arrays[0])
for i in range(num_rows):
row = separator.join([conv(arr[i]) for (conv, arr) in zip(data_converters, data_arrays)])
f.write(row+'\n')
except:
print "Could not open file for writing:",outFile,sys.exc_info()[0]
raise
class MarkerExtractor:
def __init__(self,
dbFileName,
folder=''
):
self.dbFileName = dbFileName
self._pm = ProfileManager(self.dbFileName)
self._outDir = os.getcwd() if folder == "" else folder
# make the dir if need be
makeSurePathExists(self._outDir)
def loadProfile(self, timer, bids=[], cutoff=0):
removeBins = bids is None or bids == []
return self._pm.loadData(timer,
loadBins=True,
loadMarkers=True,
loadTaxstrings=True,
loadReachability=True,
minLength=cutoff,
bids=[0] if removeBins else bids,
removeBins=removeBins,
)
def extractMappingInfo(self,
timer,
bids=[],
prefix='',
separator='\t',
cutoff=0
):
"""Extract markers from bins and write to file"""
if prefix is None or prefix == '':
prefix=os.path.basename(self.dbFileName) \
.replace(".gm", "") \
.replace(".sm", "")
profile = self.loadProfile(timer, bids, cutoff)
bm = BinManager(profile)
mt = MarkerCheckTreePrinter(profile)
# now print out the marker info
print "Writing files"
for bid in bm.getBids():
file_name = os.path.join(self._outDir, "%s_bin_%d.txt" % (prefix, bid))
bin_indices = bm.getBinIndices([bid])
idx = np.flatnonzero(np.in1d(profile.mapping.rowIndices, bin_indices))
labels = profile.mapping.markerNames[idx]
cnames = profile.contigNames[profile.mapping.rowIndices[idx]]
taxstrings = profile.mapping.taxstrings[idx]
try:
with open(file_name, 'w') as f:
#labels and lineages
f.write('#info table\n%s\n' % separator.join(['label', 'taxonomy', 'contig_name']))
for (label, taxstring, cname) in zip(labels, taxstrings, cnames):
f.write('%s\n' % separator.join([label, '\'%s\'' % taxstring, cname]))
#marker tree
f.write('\n#marker tree\n')
f.write(mt.printTree(profile.mapping.rowIndices[idx], leaves_list=bin_indices))
except:
print "Could not open file for writing:",file_name,sys.exc_info()[0]
raise
class BinExtractor:
"""Used for extracting reads and contigs based on bin assignments"""
def __init__(
self,
dbFileName,
folder='',
):
self.dbFileName = dbFileName
self._pm = ProfileManager(self.dbFileName)
self._outDir = os.getcwd() if folder == "" else folder
# make the dir if need be
makeSurePathExists(self._outDir)
def loadProfile(self, timer, bids=[], cutoff=0):
removeBins = bids is None or bids == []
return self._pm.loadData(timer,
loadMarkers=False,
loadBins=True,
bids=[0] if removeBins else bids,
removeBins=removeBins,
minLength=cutoff)
def extractContigs(self, timer, bids=[], fasta=[], prefix='', cutoff=0):
"""Extract contigs and write to file"""
if prefix is None or prefix == '':
prefix=os.path.basename(self.dbFileName) \
.replace(".gm", "") \
.replace(".sm", "")
profile = self.loadProfile(timer, bids, cutoff)
bm = BinManager(profile)
# load all the contigs which have been assigned to bins
cp = ContigParser()
# contigs looks like cid->seq
contigs = {}
import mimetypes
try:
for file_name in fasta:
gm_open = open
try:
# handle gzipped files
mime = mimetypes.guess_type(file_name)
if mime[1] == 'gzip':
import gzip
gm_open = gzip.open
except:
print "Error when guessing contig file mimetype"
raise
with gm_open(file_name, "r") as f:
cp.getWantedSeqs(f, profile.contigNames, out_dict=contigs)
except:
print "Could not parse contig file:", fasta[0], sys.exc_info()[0]
raise
# now print out the sequences
print "Writing files"
for bid in bm.getBids():
file_name = os.path.join(self._outDir,
"%s_bin_%d.fna" % (prefix, bid))
try:
with open(file_name, 'w') as f:
for cid in bm.profile.contigNames[bm.getBinIndices(bid)]:
if (cid in contigs):
f.write(">%s\n%s\n" % (cid, contigs[cid]))
else:
print "These are not the contigs you're looking for. ( %s )" % (
cid)
except:
print "Could not open file for writing:", file_name, sys.exc_info(
)[0]
raise
def extractReads(self,
timer,
bids=[],
bams=[],
prefix="",
mixBams=False,
mixGroups=False,
mixReads=False,
interleaved=False,
bigFile=False,
headersOnly=False,
minMapQual=0,
maxMisMatches=1000,
useSuppAlignments=False,
useSecondaryAlignments=False,
threads=1,
verbose=False):
"""Extract reads from bam files and write to file
All logic is handled by BamM <- soon to be wrapped by StoreM"""
# load data
profile = self.loadProfile(timer, bids)
bm = BinManager(profile) # bins
print "Extracting reads"
# work out a set of targets to pass to the parser
targets = []
group_names = []
for bid in bm.getBids():
group_names.append("BIN_%d" % bid)
row_indices = bm.getBinIndices(bid)
targets.append(list(bm.profile.contigNames[row_indices]))
# get something to parse the bams with
bam_parser = BMBE(targets,
bams,
groupNames=group_names,
prefix=prefix,
outFolder=self._outDir,
mixBams=mixBams,
mixGroups=mixGroups,
mixReads=mixReads,
interleaved=interleaved,
bigFile=bigFile,
headersOnly=headersOnly,
minMapQual=minMapQual,
maxMisMatches=maxMisMatches,
useSuppAlignments=useSuppAlignments,
useSecondaryAlignments=useSecondaryAlignments)
bam_parser.extract(threads=threads, verbose=verbose)
def __init__(self, dbFileName):
self._pm = ProfileManager(dbFileName)
import logging
logging.basicConfig(format='%(asctime)s - Router C:%(message)s',
level=logging.INFO)
from router import Router
from profileManager import ProfileManager
from helper import DisplayObjectTable
from routeTable import RoutingTable
from time import sleep
profile = ProfileManager()
profiles = profile.getAllProfiles()
router = Router(profiles['C']['ip'], profiles['C']['port'], 'C')
sleep(5)
router.run()
router.updateRoutingTable()
def __init__(self,
dbFileName):
self._pm = ProfileManager(dbFileName)
class MarkerExtractor:
def __init__(self, dbFileName, folder=''):
self.dbFileName = dbFileName
self._pm = ProfileManager(self.dbFileName)
self._outDir = os.getcwd() if folder == "" else folder
# make the dir if need be
makeSurePathExists(self._outDir)
def loadProfile(self, timer, bids=[], cutoff=0):
removeBins = bids is None or bids == []
return self._pm.loadData(
timer,
loadBins=True,
loadMarkers=True,
loadTaxstrings=True,
loadReachability=True,
minLength=cutoff,
bids=[0] if removeBins else bids,
removeBins=removeBins,
)
def extractMappingInfo(self,
timer,
bids=[],
prefix='',
separator='\t',
cutoff=0):
"""Extract markers from bins and write to file"""
if prefix is None or prefix == '':
prefix=os.path.basename(self.dbFileName) \
.replace(".gm", "") \
.replace(".sm", "")
profile = self.loadProfile(timer, bids, cutoff)
bm = BinManager(profile)
mt = MarkerCheckTreePrinter(profile)
# now print out the marker info
print "Writing files"
for bid in bm.getBids():
file_name = os.path.join(self._outDir,
"%s_bin_%d.txt" % (prefix, bid))
bin_indices = bm.getBinIndices([bid])
idx = np.flatnonzero(
np.in1d(profile.mapping.rowIndices, bin_indices))
labels = profile.mapping.markerNames[idx]
cnames = profile.contigNames[profile.mapping.rowIndices[idx]]
taxstrings = profile.mapping.taxstrings[idx]
try:
with open(file_name, 'w') as f:
#labels and lineages
f.write(
'#info table\n%s\n' %
separator.join(['label', 'taxonomy', 'contig_name']))
for (label, taxstring,
cname) in zip(labels, taxstrings, cnames):
f.write('%s\n' % separator.join(
[label, '\'%s\'' % taxstring, cname]))
#marker tree
f.write('\n#marker tree\n')
f.write(
mt.printTree(profile.mapping.rowIndices[idx],
leaves_list=bin_indices))
except:
print "Could not open file for writing:", file_name, sys.exc_info(
)[0]
raise
