def init_regions(self):
self.connections = [DPoint(0, 0), self.dr]
self.start = DPoint(0, 0)
self.end = self.start + self.dr
alpha = atan2(self.dr.y, self.dr.x)
self.angle_connections = [alpha, alpha]
alpha_trans = ICplxTrans().from_dtrans(
DCplxTrans(1, alpha * 180 / pi, False, self.start))
metal_poly = DSimplePolygon([
DPoint(0, -self.width / 2),
DPoint(self.dr.abs(), -self.width / 2),
DPoint(self.dr.abs(), self.width / 2),
DPoint(0, self.width / 2)
])
self.connection_edges = [3, 1]
self.metal_region.insert(pya.SimplePolygon().from_dpoly(metal_poly))
if (self.gap != 0):
self.empty_region.insert(
pya.Box(
Point().from_dpoint(DPoint(0, self.width / 2)),
Point().from_dpoint(
DPoint(self.dr.abs(), self.width / 2 + self.gap))))
self.empty_region.insert(
pya.Box(
Point().from_dpoint(DPoint(0, -self.width / 2 - self.gap)),
Point().from_dpoint(DPoint(self.dr.abs(),
-self.width / 2))))
self.metal_region.transform(alpha_trans)
self.empty_region.transform(alpha_trans)
def draw_pinning_holes(self):
selection_region = Region(
pya.Box(Point(100e3, 100e3), Point(101e3, 101e3)))
tmp_ph = self.region_ph.dup()
other_regs = tmp_ph.select_not_interacting(selection_region)
reg_to_fill = self.region_ph.select_interacting(selection_region)
filled_reg = fill_holes(reg_to_fill)
self.region_ph = filled_reg + other_regs
def _prepare_wall(self):
self.wall = []
for Z0 in self.objects:
if (isinstance(Z0, CPW) and Z0.dr.abs() != 0):
for ny in range(0, self.Ny):
for nx in range(0, self.Nx):
x = nx * self.width
y = ny * self.height
w = Z0.width
drLeft = DPoint(-Z0.dr.y, Z0.dr.x) * (1 / Z0.dr.abs())
box = pya.DBox(DPoint(x, y),
DPoint(x + self.width, y + self.height))
if ((box.left - abs(drLeft.x) * 2 * Z0.b / 2) >
Z0.end.x
or (box.right + abs(drLeft.x) * 2 * Z0.b / 2) <
Z0.start.x):
continue
if ((box.bottom - abs(drLeft.y) * 2 * Z0.b / 2) >
Z0.end.y
or (box.top + abs(drLeft.y) * 2 * Z0.b / 2) <
Z0.start.y):
continue
self.wall.append(Point(nx, ny))
for pt in self.wall:
self.field[pt.x, pt.y] = -2
def pin(w,pin_text, trans, LayerPinRecN, dbu, cell):
"""
w: Waveguide Width, e.g., 500 (in dbu)
pin_text: Pin Text, e.g., "pin1"
trans: e.g., trans = Trans(0, False, 0, 0) - first number is 0, 1, 2, or 3.
pinrec: PinRec Layer, e.g., layout.layer(TECHNOLOGY['PinRec']))
devrec: DevRec Layer, e.g., layout.layer(TECHNOLOGY['DevRec']))
"""
# Create the pin, as short paths:
from SiEPIC._globals import PIN_LENGTH
pin = trans*Path([Point(-PIN_LENGTH/2, 0), Point(PIN_LENGTH/2, 0)], w)
cell.shapes(LayerPinRecN).insert(pin)
text = Text (pin_text, trans)
shape = cell.shapes(LayerPinRecN).insert(text)
shape.text_size = w*0.8
print("Done drawing the layout for - pin" )
def init_regions(self):
self.metal_regions["photo"] = Region()
self.empty_regions["photo"] = Region()
self.connections = [DPoint(0, 0), self.dr]
self.start = DPoint(0, 0)
self.end = self.start + self.dr
alpha = atan2(self.dr.y, self.dr.x)
self.angle_connections = [alpha, alpha]
alpha_trans = ICplxTrans().from_dtrans(
DCplxTrans(1, alpha * 180 / pi, False, self.start))
self.metal_regions['photo'].insert(
pya.Box(Point().from_dpoint(DPoint(0, -self.width / 2)),
Point().from_dpoint(DPoint(self.dr.abs(),
self.width / 2))))
self.empty_regions['photo'].insert(
pya.Box(
Point().from_dpoint(DPoint(0, self.width / 2)),
Point().from_dpoint(
DPoint(self.dr.abs(), self.width / 2 + self.gap))))
self.empty_regions['photo'].insert(
pya.Box(
Point().from_dpoint(DPoint(0, -self.width / 2 - self.gap)),
Point().from_dpoint(DPoint(self.dr.abs(), -self.width / 2))))
self.metal_regions['photo'].transform(alpha_trans)
self.empty_regions['photo'].transform(alpha_trans)
self.metal_region = self.metal_regions['photo']
self.empty_region = self.empty_regions['photo']
def init_regions(self):
self.metal_regions["photo"] = Region()
self.empty_regions["photo"] = Region()
self.metal_regions["bridges"] = Region()
self.empty_regions["bridges"] = Region()
self.metal_regions["bridge_patches"] = Region()
self.empty_regions["bridge_patches"] = Region()
self.connections = [DPoint(0, 0), self.dr]
self.start = DPoint(0, 0)
self.end = self.start + self.dr
alpha = atan2(self.dr.y, self.dr.x)
self.angle_connections = [alpha, alpha]
alpha_trans = ICplxTrans().from_dtrans(
DCplxTrans(1, alpha * 180 / pi, False, self.start))
self.metal_regions["photo"].insert(
pya.Box(Point().from_dpoint(DPoint(0, -self.width / 2)),
Point().from_dpoint(DPoint(self.dr.abs(),
self.width / 2))))
self.empty_regions["photo"].insert(
pya.Box(
Point().from_dpoint(DPoint(0, self.width / 2)),
Point().from_dpoint(
DPoint(self.dr.abs(), self.width / 2 + self.gap))))
self.empty_regions["photo"].insert(
pya.Box(
Point().from_dpoint(DPoint(0, -self.width / 2 - self.gap)),
Point().from_dpoint(DPoint(self.dr.abs(), -self.width / 2))))
self.metal_regions["photo"].transform(alpha_trans)
self.empty_regions["photo"].transform(alpha_trans)
if self.dr.x == 0:
N_bridges = int((self.dr.y - self._bridge_interval) //
self._bridge_interval + 1)
for i in range(N_bridges):
ab = Airbridge(self.start + DPoint(
0,
(self._bridge_interval / 2 + i * self._bridge_interval) *
sign(self.dr.y)),
trans_in=DTrans.R90)
self.metal_regions["bridges"] += ab.metal_regions["bridges"]
self.metal_regions["bridges"] += ab.metal_regions[
"bridge_patches"]
elif self.dr.y == 0:
N_bridges = int((self.dr.x - self._bridge_interval) //
self._bridge_interval + 1)
print("N_bridges", N_bridges)
for i in range(N_bridges):
bridge_pos = self.start + DPoint(
(self._bridge_interval / 2 + i * self._bridge_interval) *
sign(self.dr.x), 0)
ab = Airbridge(bridge_pos, trans_in=None)
self.metal_regions["bridges"] += ab.metal_regions["bridges"]
self.metal_regions["bridge_patches"] += ab.metal_regions[
"bridge_patches"]
def find_path_mur( self, start, end, Nx=15, Ny=15 ):
self.start_last = start
self.end_last = end
self.Nx = Nx
self.Ny = Ny
self.width = self.bbox.width()/Nx
self.height = self.bbox.height()/Ny
self.field = np.full( (self.Nx,self.Ny), -1, dtype=np.int32 )
field_start = Point( int(start.x/self.width), int(start.y/self.height) )
field_end = Point( int(end.x/self.width), int(end.y/self.height) )
self._prepare_wall()
in_propogation = True
self.field[ field_start.x,field_start.y ] = 0
field_back_buffer = np.copy( self.field )
print( self.field, "\n\n" )
while( self.field[ field_end.x, field_end.y] == -1 and in_propogation):
for x in range( 0,Nx ):
for y in range( 0,Ny ):
if( self.field[x,y] >= 0 ):
for dx in [-1,0,1]:
for dy in [-1,0,1]:
if( (x + dx) >= Nx or (x + dx < 0) or (y + dy) >= Ny or (y + dy < 0) ):
continue
if( dy == 0 and dx == 0 ):
continue
elif( self.field[x + dx,y + dy] == -1 ):
field_back_buffer[x+dx,y+dy] = self.field[x,y] + 1
if( np.array_equal( self.field, field_back_buffer ) ):
in_propogation = False
np.copyto( self.field, field_back_buffer )
print( self.field, "\n\n" )
path = []
if( self.field[ field_end.x, field_end.y ] > 0 ):
current = Point( field_end.x, field_end.y )
while( True ):
for dx in [-1,0,1]:
isNext = False
for dy in [-1,0,1]:
if( (current.x + dx) >= Nx or (current.x + dx < 0) or (current.y + dy) >= Ny or (current.y + dy < 0) ):
continue
elif( current == Point(0,0) ):
return path
else:
if( self.field[ current.x + dx, current.y + dy ] == (self.field[current.x,current.y] - 1) ):
path.append(current.dup())
current.x += dx
current.y += dy
isNext = True
break
if( isNext ):
break
else:
print( "No path is founded" )
return None
origin = DPoint(0, 0)
width = 20e3
gap = 25e3
Z0 = CPW(width, gap, origin + DPoint(0.5e6, 0.5e6),
origin + DPoint(1e6, 0.5e6))
Z0.place(cell, layer_i)
start = DPoint(0, 0)
end = DPoint(1e6, 1e6)
## pathfinding START ##
pf = Path_finder(Z0, bbox=CHIP.box)
path = pf.find_path_mur(start, end, 100, 100)
## pathfinding END ##
### DRAW SECTION START ###
for y in range(0, pf.Ny):
for x in range(0, pf.Nx):
if (pf.field[x, y] == -2):
cell.shapes(layer_j).insert(pya.Box().from_dbox(
pya.DBox(DPoint(x * pf.width, y * pf.height),
DPoint((x + 1) * pf.width, (y + 1) * pf.height))))
if (Point(x, y) not in path):
cell.shapes(layer_i).insert(pya.Box().from_dbox(
pya.DBox(DPoint(x * pf.width, y * pf.height),
DPoint((x + 1) * pf.width, (y + 1) * pf.height))))
### DRAW SECTION END ###
lv.zoom_fit()
### MAIN FUNCTION END ###
info = pya.LayerInfo(1, 0)
info2 = pya.LayerInfo(2, 0)
layer_photo = layout.layer(info)
layer_el = layout.layer(info2)
# clear this cell and layer
cell.clear()
# setting layout view
#lv.select_cell(cell.cell_index(), 0)
lv.add_missing_layers()
#Constants
ground = pya.Box(Point(-CHIP.dx / 2, -CHIP.dy / 2),
Point(CHIP.dx / 2, CHIP.dy / 2))
canvas = Region(ground)
ebeam = Region()
#Transmon parameters
xmon_cpw_params = CPWParameters(20e3, 10e3)
arms_vert_len = 144.3e3
arms_hor_len = 200e3
JJ_site_span = 8e3
h_JJ = 278
w_JJ = 150
asymmetry = 0.5
layer_info_photo = pya.LayerInfo(10,0) layer_info_el = pya.LayerInfo(1,0) layer_photo = layout.layer( layer_info_photo ) layer_el = layout.layer( layer_info_el ) # clear this cell and layer cell.clear() # setting layout view if lv: lv.select_cell(cell.cell_index(), 0) lv.add_missing_layers() ## DRAWING SECTION START ## cell.shapes( layer_photo ).insert( pya.Box( Point(0,0), Point( CHIP.dx, CHIP.dy ) ) ) origin = DPoint( 0,0 ) contact_L = 1e6 # main drive line coplanar width = 24.1e3 gap = 12.95e3 p1 = DPoint( 0 + contact_L, CHIP.dy/2 ) p2 = DPoint( CHIP.dx - contact_L, CHIP.dy/2 ) Z0 = CPW( width, gap, p1, p2 ) Z0.place( cell, layer_photo ) # left contact pad width1 = CHIP.width*2 gap1 = CHIP.gap*2
layer_info_photo = pya.LayerInfo(10,0)
layer_info_el = pya.LayerInfo(1,0)
layer_photo = layout.layer( layer_info_photo )
layer_el = layout.layer( layer_info_el )
# clear this cell and layer
cell.clear()
# setting layout view
lv.select_cell(cell.cell_index(), 0)
lv.add_missing_layers()
## DRAWING SECTION START ##
cell.shapes( layer_photo ).insert( pya.Box( Point(0,0), Point( CHIP.dx, CHIP.dy ) ) )
origin = DPoint( 0,0 )
contact_L = 1e6
# main drive line coplanar
width = 24.1e3
gap = 12.95e3
y = 0.2*CHIP.dy
p1 = DPoint( 0, y )
p2 = DPoint( CHIP.dx, y )
Z0 = CPW( width, gap, p1, p2 )
Z0.place( cell, layer_photo )
# resonator
info = pya.LayerInfo(1, 0)
info2 = pya.LayerInfo(2, 0)
layer_photo = layout.layer(info)
layer_el = layout.layer(info2)
# clear this cell and layer
cell.clear()
# setting layout view
#lv.select_cell(cell.cell_index(), 0)
lv.add_missing_layers()
#Constants
ground = pya.Box(Point(-(CHIP.dx + 100e3), -(CHIP.dy + 100e3) * 2),
Point(CHIP.dx + 100e3, (CHIP.dy + 100e3) * 2))
canvas = Region(ground)
ebeam = Region()
#Transmon parameters
xmon_cpw_params = CPWParameters(20e3, 10e3)
arms_vert_len = 144.3e3
arms_hor_len = 200e3
JJ_site_span = 8e3
h_JJ = 238
w_JJ = 150
layer_info_photo = pya.LayerInfo(10, 0)
layer_info_el = pya.LayerInfo(1, 0)
layer_photo = layout.layer(layer_info_photo)
layer_el = layout.layer(layer_info_el)
# clear this cell and layer
cell.clear()
# setting layout view
lv.select_cell(cell.cell_index(), 0)
lv.add_missing_layers()
## DRAWING SECTION START ##
cell.shapes(layer_photo).insert(
pya.Box(Point(0, 0), Point(CHIP.dx, CHIP.dy)))
origin = DPoint(0, 0)
contact_L = 1e6
# main drive line coplanar
width = 24.1e3
gap = 12.95e3
p1 = DPoint(0 + contact_L, CHIP.dy / 2)
p2 = DPoint(CHIP.dx - contact_L, CHIP.dy / 2)
Z0 = CPW(width, gap, p1, p2)
Z0.place(cell, layer_photo)
# left contact pad
width1 = CHIP.width * 2
gap1 = CHIP.gap * 2
info = pya.LayerInfo(1, 0)
info2 = pya.LayerInfo(2, 0)
layer_photo = layout.layer(info)
layer_el = layout.layer(info2)
# clear this cell and layer
cell.clear()
# setting layout view
#lv.select_cell(cell.cell_index(), 0)
lv.add_missing_layers()
#Constants
ground = pya.Box(Point(-CHIP.dx / 2, -CHIP.dy / 2),
Point(CHIP.dx / 2, CHIP.dy / 2))
canvas = Region(ground)
ebeam = Region()
feed_cpw_params = CPWParameters(20e3, 10e3)
md_cpw_params = CPWParameters(7e3, 4e3)
fc_cpw_params = CPWParameters(7e3, 4e3)
### DRAW SECTION START ###
cp1 = Contact_Pad(origin=DPoint(-CHIP.dx / 2, -CHIP.dy / 4),
feedline_cpw_params=md_cpw_params)
cp1.place(canvas)
cross_lens = [125e3]
cross_gnd_gaps = [20e3]
xmon_dX = 2 * cross_lens[0] + cross_widths[0] + 2 * cross_gnd_gaps[0]
xmon_distances = [1e3 * x for x in range(393, 394, 10)]
from itertools import product
pars = product(cross_widths, cross_lens, cross_gnd_gaps, xmon_distances)
for cross_width, cross_len, cross_gnd_gap, xmon_distance in pars:
# clear this cell and layer
cell.clear()
xmon_dX = 2 * cross_len + cross_width + 2 * cross_gnd_gap
CHIP.dx = 5 * xmon_dX + xmon_distance
CHIP.dy = 5 * xmon_dX + xmon_distance
CHIP.center = DPoint(CHIP.dx / 2, CHIP.dy / 2)
chip_box = pya.Box(Point(0, 0), Point(CHIP.dx, CHIP.dy))
cell.shapes(layer_photo).insert(chip_box)
xmon_cross1 = Xmon_cross(CHIP.center + DPoint(-xmon_distance / 2, 0),
cross_width, cross_len, cross_gnd_gap)
xmon_cross1.place(cell, layer_photo)
xmon_cross2 = Xmon_cross(CHIP.center + DPoint(xmon_distance / 2, 0),
cross_width, cross_len, cross_gnd_gap)
xmon_cross2.place(cell, layer_photo)
## DRAWING SECTION END ##
# lv.zoom_fit()
### MATLAB COMMANDER SECTION START ###
ml_terminal = SonnetLab()
def layout_waveguide4(cell, dpath, waveguide_type, debug=True):
if debug:
print('SiEPIC.utils.layout.layout_waveguide4: ')
print(' - waveguide_type: %s' % (waveguide_type))
# get the path and clean it up
layout = cell.layout()
dbu = layout.dbu
dpath = dpath.to_itype(dbu)
dpath.unique_points()
pts = dpath.get_points()
dpts = dpath.get_dpoints()
# Load the technology and all waveguide types
from SiEPIC.utils import load_Waveguides_by_Tech
technology_name = layout.technology_name
waveguide_types = load_Waveguides_by_Tech(technology_name)
if debug:
print(' - technology_name: %s' % (technology_name))
print(' - waveguide_types: %s' % (waveguide_types))
# Load parameters for the chosen waveguide type
params = [t for t in waveguide_types if t['name'] == waveguide_type]
if type(params) == type([]) and len(params) > 0:
params = params[0]
else:
print('error: waveguide type not found in PDK waveguides')
raise Exception(
'error: waveguide type (%s) not found in PDK waveguides' %
waveguide_type)
# compound waveguide types:
if 'compound_waveguide' in params:
# find the singlemode and multimode waveguides:
if 'singlemode' in params['compound_waveguide']:
singlemode = params['compound_waveguide']['singlemode']
else:
raise Exception(
'error: waveguide type (%s) does not have singlemode defined' %
waveguide_type)
if 'multimode' in params['compound_waveguide']:
multimode = params['compound_waveguide']['multimode']
else:
raise Exception(
'error: waveguide type (%s) does not have multimode defined' %
waveguide_type)
params_singlemode = [
t for t in waveguide_types if t['name'] == singlemode
]
params_multimode = [
t for t in waveguide_types if t['name'] == multimode
]
if type(params_singlemode) == type([]) and len(params_singlemode) > 0:
params_singlemode = params_singlemode[0]
else:
raise Exception(
'error: waveguide type (%s) not found in PDK waveguides' %
singlemode)
if type(params_multimode) == type([]) and len(params_multimode) > 0:
params_multimode = params_multimode[0]
else:
raise Exception(
'error: waveguide type (%s) not found in PDK waveguides' %
multimode)
# find the taper
if 'taper_library' in params[
'compound_waveguide'] and 'taper_cell' in params[
'compound_waveguide']:
taper = layout.create_cell(
params['compound_waveguide']['taper_cell'],
params['compound_waveguide']['taper_library'])
if not taper:
raise Exception(
'Cannot import cell %s : %s' %
(params['compound_waveguide']['taper_cell'],
params['compound_waveguide']['taper_library']))
else:
raise Exception(
'error: waveguide type (%s) does not have taper cell and library defined'
% waveguide_type)
from pya import Trans, CellInstArray
'''
find sections of waveguides that are larger than (2 x radius + 2 x taper_length)
- insert two tapers
- insert multimode straight section
- insert singlemode waveguides (including bends) before
'''
import math
from SiEPIC.extend import to_itype
from pya import Point
radius = to_itype(params_singlemode['radius'], dbu)
taper_length = taper.find_pins()[0].center.distance(
taper.find_pins()[1].center)
min_length = 2 * radius + 2 * taper_length
offset = radius
wg_sm_segment_pts = []
wg_last = 0
waveguide_length = 0
for ii in range(1, len(dpts)):
start_point = dpts[ii - 1]
end_point = dpts[ii]
distance_points = end_point.distance(start_point)
if distance_points < min_length:
# single mode segment, keep track
if ii == 1:
wg_sm_segment_pts.append(pts[ii - 1])
wg_sm_segment_pts.append(pts[ii])
if ii == len(pts) - 1:
subcell = layout.create_cell("Waveguide_sm_%s" % ii)
cell.insert(CellInstArray(subcell.cell_index(), Trans()))
waveguide_length += layout_waveguide3(subcell,
wg_sm_segment_pts,
params_singlemode,
debug=True)
else:
# insert two tapers and multimode waveguide
angle = math.atan2(
(end_point.y - start_point.y),
(end_point.x - start_point.x)) / math.pi * 180
if ii == 1:
wg_first = offset
else:
wg_first = 0
if ii == len(pts) - 1:
wg_last = offset
if round(angle) % 360 == 270.0:
t = Trans(Trans.R270, start_point.x,
start_point.y - offset + wg_first)
t2 = Trans(Trans.R90, end_point.x,
end_point.y + offset - wg_last)
wg_start_pt = Point(
start_point.x,
start_point.y - offset - taper_length + wg_first)
wg_end_pt = Point(
end_point.x,
end_point.y + offset + taper_length - wg_last)
if round(angle) % 360 == 90.0:
t = Trans(Trans.R90, start_point.x,
start_point.y + offset - wg_first)
t2 = Trans(Trans.R270, end_point.x,
end_point.y - offset + wg_last)
wg_start_pt = Point(
start_point.x,
start_point.y + offset + taper_length - wg_first)
wg_end_pt = Point(
end_point.x,
end_point.y - offset - taper_length + wg_last)
if round(angle) % 360 == 180.0:
t = Trans(Trans.R180, start_point.x - offset + wg_first,
start_point.y)
t2 = Trans(Trans.R0, end_point.x + offset - wg_last,
end_point.y)
wg_start_pt = Point(
start_point.x - offset - taper_length + wg_first,
start_point.y)
wg_end_pt = Point(
end_point.x + offset + taper_length - wg_last,
end_point.y)
if round(angle) % 360 == 0.0:
t = Trans(Trans.R0, start_point.x + offset - wg_first,
start_point.y)
t2 = Trans(Trans.R180, end_point.x - offset + wg_last,
end_point.y)
wg_start_pt = Point(
start_point.x + offset + taper_length - wg_first,
start_point.y)
wg_end_pt = Point(
end_point.x - offset - taper_length + wg_last,
end_point.y)
inst_taper = cell.insert(CellInstArray(taper.cell_index(), t))
inst_taper = cell.insert(CellInstArray(taper.cell_index(), t2))
waveguide_length += taper_length * 2
subcell = layout.create_cell("Waveguide_mm_%s" % ii)
cell.insert(CellInstArray(subcell.cell_index(), Trans()))
waveguide_length += layout_waveguide3(subcell,
[wg_start_pt, wg_end_pt],
params_multimode,
debug=True)
# compound segment
if ii > 1:
wg_sm_segment_pts.append(t.disp.to_p())
subcell = layout.create_cell("Waveguide_sm_%s" % ii)
cell.insert(CellInstArray(subcell.cell_index(), Trans()))
waveguide_length += layout_waveguide3(subcell,
wg_sm_segment_pts,
params_singlemode,
debug=True)
wg_sm_segment_pts = [t2.disp.to_p(), pts[ii]]
else:
wg_sm_segment_pts = [t2.disp.to_p(), pts[ii]]
else:
# primitive waveguide type
waveguide_length = layout_waveguide3(cell, pts, params, debug=True)
return waveguide_length
def layout_waveguide3(cell, pts, params, debug=True):
if debug:
print('SiEPIC.utils.layout.layout_waveguide3: ')
layout = cell.layout()
dbu = layout.dbu
technology_name = layout.technology_name
from SiEPIC.utils import get_technology_by_name
TECHNOLOGY = get_technology_by_name(technology_name)
from SiEPIC.extend import to_itype
wg_width = to_itype(params['width'], dbu)
radius = float(params['radius'])
model = params['model']
cellName = 'Waveguide2'
CML = params['CML']
if debug:
print(' - waveguide params: %s' % (params))
if 'compound_waveguide' in params:
print('error: this function cannot handle compound waveguides')
raise Exception(
'error: this function cannot handle compound waveguides (%s)' %
waveguide_type)
# draw the waveguide
waveguide_length = layout_waveguide2(
TECHNOLOGY, layout, cell, [wg['layer'] for wg in params['component']],
[wg['width'] for wg in params['component']],
[wg['offset'] for wg in params['component']], pts, radius,
params['adiabatic'], params['bezier'])
# Draw the marking layers
from SiEPIC.utils import angle_vector
LayerPinRecN = layout.layer(TECHNOLOGY['PinRec'])
make_pin(cell, 'opt1', pts[0], wg_width, LayerPinRecN,
angle_vector(pts[0] - pts[1]) % 360)
make_pin(cell, 'opt2', pts[-1], wg_width, LayerPinRecN,
angle_vector(pts[-1] - pts[-2]) % 360)
from pya import Trans, Text, Path, Point
'''
t1 = Trans(angle_vector(pts[0]-pts[1])/90, False, pts[0])
cell.shapes(LayerPinRecN).insert(Path([Point(-10, 0), Point(10, 0)], wg_width).transformed(t1))
cell.shapes(LayerPinRecN).insert(Text("opt1", t1, 0.3/dbu, -1))
t = Trans(angle_vector(pts[-1]-pts[-2])/90, False, pts[-1])
cell.shapes(LayerPinRecN).insert(Path([Point(-10, 0), Point(10, 0)], wg_width).transformed(t))
cell.shapes(LayerPinRecN).insert(Text("opt2", t, 0.3/dbu, -1))
'''
LayerDevRecN = layout.layer(TECHNOLOGY['DevRec'])
# Compact model information
angle_vec = angle_vector(pts[0] - pts[1]) / 90
halign = 0 # left
angle = 0
dpt = Point(0, 0)
if angle_vec == 0: # horizontal
halign = 2 # right
angle = 0
dpt = Point(0, 0.2 * wg_width)
if angle_vec == 2: # horizontal
halign = 0 # left
angle = 0
dpt = Point(0, 0.2 * wg_width)
if angle_vec == 1: # vertical
halign = 2 # right
angle = 1
dpt = Point(0.2 * wg_width, 0)
if angle_vec == -1: # vertical
halign = 0 # left
angle = 1
dpt = Point(0.2 * wg_width, 0)
pt2 = pts[0] + dpt
pt3 = pts[0] - dpt
pt4 = pts[0] - 6 * dpt
pt5 = pts[0] + 2 * dpt
t = Trans(angle, False, pt3)
text = Text('Lumerical_INTERCONNECT_library=Design kits/%s' % CML, t,
0.1 * wg_width, -1)
text.halign = halign
shape = cell.shapes(LayerDevRecN).insert(text)
t = Trans(angle, False, pt2)
text = Text('Component=%s' % model, t, 0.1 * wg_width, -1)
text.halign = halign
shape = cell.shapes(LayerDevRecN).insert(text)
t = Trans(angle, False, pt5)
text = Text('cellName=%s' % cellName, t, 0.1 * wg_width, -1)
text.halign = halign
shape = cell.shapes(LayerDevRecN).insert(text)
t = Trans(angle, False, pts[0])
pts_txt = str([[round(p.to_dtype(dbu).x, 3),
round(p.to_dtype(dbu).y, 3)]
for p in pts]).replace(', ', ',')
text = Text(
'Spice_param:wg_length=%.9f wg_width=%.3g points="%s" radius=%.3g' %
(waveguide_length * 1e-6, wg_width * 1e-9, pts_txt, radius * 1e-6), t,
0.1 * wg_width, -1)
text.halign = halign
shape = cell.shapes(LayerDevRecN).insert(text)
t = Trans(angle, False, pt4)
text = Text('Length=%.3f (microns)' % (waveguide_length), t,
0.5 * wg_width, -1)
text.halign = halign
shape = cell.shapes(LayerDevRecN).insert(text)
return waveguide_length
def make_pin(cell, name, center, w, layer, direction, debug=False):
'''
Makes a pin that SiEPIC-Tools will recognize
cell: which cell to draw it in
name: text label for the pin
center: location, int [x,y]
w: pin width
layer: layout.layer() type
direction =
0: right
90: up
180: left
270: down
Units: intput can be float for microns, or int for nm
'''
from SiEPIC.extend import to_itype
from pya import Point, DPoint
import numpy
dbu = cell.layout().dbu
if type(w) == type(float()):
w = to_itype(w, dbu)
if debug:
print('SiEPIC.utils.layout.make_pin: w converted to %s' % w)
else:
if debug:
print('SiEPIC.utils.layout.make_pin: w %s' % w)
# print(type(center[0]))
if type(center) == type(Point()) or type(center) == type(DPoint()):
center = [center.x, center.y]
if type(center[0]) == type(float()) or type(center[0]) == type(
numpy.float64()):
center[0] = to_itype(center[0], dbu)
center[1] = to_itype(center[1], dbu)
if debug:
print('SiEPIC.utils.layout.make_pin: center converted to %s' %
(center))
else:
if debug:
print('SiEPIC.utils.layout.make_pin: center %s' % (center))
from SiEPIC._globals import PIN_LENGTH as pin_length
direction = direction % 360
if direction not in [0, 90, 180, 270]:
raise ('error in make_pin: direction must be one of [0, 90, 180, 270]')
# text label
t = pya.Trans(pya.Trans.R0, center[0], center[1])
text = pya.Text(name, t)
shape = cell.shapes(layer).insert(text)
shape.text_dsize = float(w * dbu / 2)
shape.text_valign = 1
if direction == 0:
p1 = pya.Point(center[0] - pin_length / 2, center[1])
p2 = pya.Point(center[0] + pin_length / 2, center[1])
shape.text_halign = 2
if direction == 90:
p1 = pya.Point(center[0], center[1] - pin_length / 2)
p2 = pya.Point(center[0], center[1] + pin_length / 2)
shape.text_halign = 2
shape.text_rot = 1
if direction == 180:
p1 = pya.Point(center[0] + pin_length / 2, center[1])
p2 = pya.Point(center[0] - pin_length / 2, center[1])
shape.text_halign = 3
if direction == 270:
p1 = pya.Point(center[0], center[1] + pin_length / 2)
p2 = pya.Point(center[0], center[1] - pin_length / 2)
shape.text_halign = 3
shape.text_rot = 1
pin = pya.Path([p1, p2], w)
cell.shapes(layer).insert(pin)
layer_info_photo = pya.LayerInfo(10, 0)
layer_info_el = pya.LayerInfo(1, 0)
layer_photo = layout.layer(layer_info_photo)
layer_el = layout.layer(layer_info_el)
# clear this cell and layer
cell.clear()
# setting layout view
lv.select_cell(cell.cell_index(), 0)
lv.add_missing_layers()
## DRAWING SECTION START ##
cell.shapes(layer_photo).insert(
pya.Box(Point(0, 0), Point(CHIP.dx, CHIP.dy)))
origin = DPoint(0, 0)
contact_L = 1e6
# main drive line coplanar
width = 24.1e3
gap = 12.95e3
p1 = DPoint(0 + contact_L, CHIP.dy / 2)
p2 = DPoint(CHIP.dx - contact_L, CHIP.dy / 2)
Z0 = CPW(width, gap, p1, p2)
Z0.place(cell, layer_photo)
# left contact pad
width1 = CHIP.width * 2
gap1 = CHIP.gap * 2
fpLayerN = cell_top.layout().layer(lib[layer_floorplan])
TextLayerN = cell_top.layout().layer(lib[layer_text])
# Draw the floor plan
ly_height = 350
ly_width = 600
cell_top.shapes(fpLayerN).insert(Box(0, 0, ly_width / dbu, ly_height / dbu))
#%%Import Grating couplers
GC_imported = ly.create_cell("Grating_Coupler_13deg_TE_1550_Oxide",
pdk).cell_index()
GC_pitch = 127
t = Trans(Trans.R0, 0.5 * ly_width / dbu,
(0.5 * ly_height - GC_pitch / 2) / dbu)
cell_top.insert(
CellInstArray(GC_imported, t,
DPoint(0, GC_pitch).to_itype(dbu), Point(0, 0), 2, 1))
#%%draw waveguide connecting grating couplers
path = [[0.5 * ly_width, 0.5 * ly_height - GC_pitch / 2]] # start point
path.append([0.5 * ly_width + 50, 0.5 * ly_height - GC_pitch / 2])
path.append([0.5 * ly_width + 50, 0.5 * ly_height + GC_pitch / 2])
path.append([0.5 * ly_width, 0.5 * ly_height + GC_pitch / 2]) # end point
path = DPath([DPoint(each[0], each[1]) for each in path], 0.5)
path = path.to_itype(dbu)
pts = path.get_points()
widths = [0.5]
layers = ['Waveguide']
offset = [0]
radius = 15