def test_004_serialise(self):
self.instance_a.root_tc04_a.a = "emigration"
self.instance_b.root_tc04_b.b = "alpine-fork"
expected_json = json.load(open(os.path.join(os.path.dirname(__file__), "json", "04-serialise.json")))
v = json.loads(pbJ.dumps(self.path_helper.get_unique("/")))
self.assertEqual(v, expected_json)
expected_ietf_json = json.load(open(os.path.join(os.path.dirname(__file__), "json", "04b-ietf-serialise.json")))
v = json.loads(pbJ.dumps(self.path_helper.get_unique("/"), mode="ietf"))
self.assertEqual(v, expected_ietf_json)
def test_004_serialise(self):
self.instance_a.root_tc04_a.a = "emigration"
self.instance_b.root_tc04_b.b = "alpine-fork"
expected_json = json.load(open(os.path.join(this_dir, "json", "04-serialise.json")))
v = json.loads(pbJ.dumps(self.path_helper.get_unique("/")))
self.assertEqual(v,expected_json)
expected_ietf_json = json.load(open(os.path.join(this_dir, "json", "04b-ietf-serialise.json")))
v = json.loads(pbJ.dumps(self.path_helper.get_unique("/"), mode="ietf"))
self.assertEqual(v, expected_ietf_json)
def DisableRadio(ap, radio_obj, five_g=True):
"""Disables radio.
Args:
ap: (object) chido_test.ApObject containing all AP attributes.
radio_obj: (YANGBaseClass) OC radio container object.
five_g: (bool) Whether target is 5GHz radio.
Raises:
ConfigError: if radio config does not match.
StateMismatchError: if the radio did not get disabled.
"""
ap.radio_id = '0' if five_g else '1'
ap.radio_freq = 'FREQ_5GHZ' if five_g else 'FREQ_2GHZ'
path = _GetPathByContainer(ap, 'radios')
logging.info('Setting radio id %s to disabled', ap.radio_id)
if not five_g:
radio_obj.id = ap.radio_id
radio_obj.operating_frequency = ap.radio_freq
radio_obj.channel = 1
radio_obj.enabled = False
json_str = pybindJSON.dumps(radio_obj, mode='ietf')
SetConfig(ap, xpath=path, json_str=json_str)
expected_config = pybindJSON.dumps(radio_obj,
mode='ietf') # string format.
# We reset path in case some parameters changed based above.
path = _GetPathByContainer(ap, 'radios')
gnmi_response = GetPath(ap, path)
json_bytes = gnmi_response.notification[0].update[0].val.json_ietf_val
json_bytes = json_bytes.replace(b'openconfig-wifi-types:', b'')
retrieved_config_obj = pybindJSONDecoder.load_ietf_json(
json.loads(json_bytes), None, None, obj=radio_obj)
retrieved_config = pybindJSON.dumps(retrieved_config_obj, mode='ietf')
if expected_config != retrieved_config:
logging.info(expected_config)
logging.info(retrieved_config)
raise ConfigError('Radio "%s" config does not match config sent' %
ap.radio_id)
path = path.replace('/config', '/state')
radio = _GetContainer(ap, 'radios')
gnmi_response = GetPath(ap, path)
json_bytes = gnmi_response.notification[0].update[0].val.json_ietf_val
json_bytes = json_bytes.replace(b'openconfig-wifi-types:', b'')
radio_state = pybindJSONDecoder.load_ietf_json(json.loads(json_bytes),
None,
None,
obj=radio.state)
if radio_state.enabled:
raise StateMismatchError('Radio %s not disabled')
logging.info('Radio "%s" was disabled', ap.radio_id)
def createTransceiver(slot_width, constellation, bandwidth, fec):
trans = sliceable_transceiver_sdm()
trans.transceiver.transceiverid = "1"
sliceobj = trans.transceiver.slice.add("1")
counter = 1
modes = ["LP01", "LP11a", "LP11b", "LP21a", "LP21b", "LP02"]
channels = [
"137", "129", "121", "113", "105", "97", "89", "81", "73", "65", "57",
"49", "41", "33", "25", "17"
]
for i in range(0, len(modes)):
for j in range(0, len(channels)):
optical_channel = sliceobj.optical_channel.add('%s' % counter)
optical_channel.coreid = '%s' % counter
optical_channel.modeid = '%s' % modes[i]
fs = optical_channel.frequency_slot
fs.ncf = '%s' % channels[j]
fs.slot_width = slot_width
counter += 1
for i in range(1, len(channels) * len(modes) + 1):
optical_signal = sliceobj.optical_signal.add('%s' % i)
optical_signal.constellation = constellation
optical_signal.bandwidth = bandwidth
optical_signal.fec = fec
equalization = optical_signal.equalization
equalization.equalizationid = 1
equalization.mimo = "true"
equalization.num_taps = "500"
print(pybindJSON.dumps(trans))
return trans
def test_example_vnf_pps_dump_json(self):
example_vnf_pps = os.listdir(EXAMPLE_DIR)
# check each vnf_pp file against the model
print("Validating: {} VNF-PP files.".format(len(example_vnf_pps)))
for ep in example_vnf_pps:
parsed_vnfpp = check_against_model(os.path.join(EXAMPLE_DIR, ep))
print(pybindJSON.dumps(parsed_vnfpp))
def Provision(ap):
"""Triggers the provisioning workflow.
Args:
ap: AP Class object.
This populates the conig object (from PyangBind, from YANG model) for day-0
provisioning.
"""
paths = gnmi_lib.ParsePath(gnmi_lib.PathNames((
'/provision-aps/provision-ap[mac=%s]/' % ap.mac)))
provision_apconfigs = ap_manager_configs.provision_aps.provision_ap
day0 = provision_apconfigs.add(ap.mac)
day0.config.mac = ap.mac
day0.config.hostname = ap.ap_name
day0.config.country_code = 'US'
json_value = json.loads(pybindJSON.dumps(day0, mode='ietf', indent=2))
if FLAGS.dry_run:
print('Here\'s the JSON that was created, for sending to the Target:')
print('*'*25, '\n\n', json.dumps(json_value, indent=2),'\n\n', '*'*25)
print('JSON written as dry_run_provision.json')
f = six.moves.builtins.open('dry_run_provision.json', 'w')
f.write(json.dumps(json_value, indent=2) + '\n')
sys.exit()
else:
r = gnmi_lib.Set(ap.stub, paths, ap.targetuser, ap.targetpass, json_value, 'update')
print('provisioning succesfull, with the following gNMI SetResponse:\n', r)
def test_005_deserialise(self):
root = self.path_helper.get_unique("/")
fh = open(os.path.join(this_dir, "json", "05-deserialise.json"), 'r')
pybindJSONDecoder.load_json(json.load(fh), None, None, obj=root)
v = json.loads(pbJ.dumps(self.path_helper.get_unique("/")))
x = json.load(open(os.path.join(this_dir, "json", "05-deserialise.json"), 'r'))
self.assertEqual(v, x)
def edit_device(device):
session_id = request.cookies.get('SessionCookie')
snoDB = ConfigDB.active_sessions[session_id]
deviceObj = snoDB.devices.device[device]
if request.method == 'GET':
device_dict = json.loads(pybindJSON.dumps(deviceObj))
device_type = deviceObj.device_type
jtox_cmd_config_yang = "pyang -f jtox ../yang/sno.yang ../device/yang/device.yang ../device/yang/" + str(
device_type) + "/cumulus-nclu.yang"
jtox_output, jtox_error = subprocess_cmd(jtox_cmd_config_yang)
tree_output = json.loads(jtox_output.decode('utf-8'))
device_dict['tree'] = tree_output['tree']
print(device_dict)
return render_template('editDevice.html', device_dict=device_dict)
device_dict = request.form.to_dict()
correct_nested_dict(device_dict)
if "_method" in device_dict.keys():
snoDB.devices.device.delete(device)
ConfigDB.active_sessions[session_id] = snoDB
flash("Device deleted successfully")
return redirect(url_for('add_device'))
#session_id = request.cookies.get('SessionCookie')
#snoDB = ConfigDB.active_sessions[session_id]
#device = snoDB.devices.device[device]
pybindJSONDecoder.load_json(device_dict, None, None, deviceObj)
ConfigDB.active_sessions[session_id] = snoDB
flash("Device edited successfully")
return redirect(url_for('add_device'))
def pyangbind_validation(self, item, data, force=False):
'''
item: vnfd, nst, nsd
data: dict object loaded from the descriptor file
force: True to skip unknown fields in the descriptor
'''
if item == "vnfd":
myobj = vnfd_im()
elif item == "nsd":
myobj = nsd_im()
elif item == "nst":
myobj = nst_im()
else:
raise ValidationException(
"Not possible to validate '{}' item".format(item))
try:
pybindJSONDecoder.load_ietf_json(data,
None,
None,
obj=myobj,
path_helper=True,
skip_unknown=force)
out = pybindJSON.dumps(myobj, mode="ietf")
desc_out = yaml.safe_load(out)
return desc_out
except Exception as e:
raise ValidationException(
"Error in pyangbind validation: {}".format(str(e)))
def test_json_generation(self):
json_dir = os.path.join(os.path.dirname(__file__), "json")
for file_name in os.listdir(json_dir):
with self.subTest(json_file=file_name), open(
os.path.join(json_dir, file_name), "r") as file_handle:
parameters = regex.sub(
"interfaces\_ph:(?P<pathhelper>[a-zA-Z]+)\-flt:(?P<filter>[a-zA-Z]+)\-m:(?P<mode>[a-zA-Z]+)\.json",
"\g<pathhelper>||\g<filter>||\g<mode>",
file_name,
).split("||")
path_helper, config_filter, mode = (YANGBool(parameters[0]),
YANGBool(parameters[1]),
parameters[2])
if path_helper:
instance = self.ocbind.openconfig_interfaces(
path_helper=self.yang_helper)
else:
instance = self.ocbind.openconfig_interfaces()
instance.interfaces.interface.add("eth0")
expected_json = json.load(file_handle)
actual_json = json.loads(
dumps(instance, filter=bool(config_filter), mode=mode))
self.assertEqual(
expected_json, actual_json,
"Generated JSON did not match expected object for %s" %
file_name)
def test0100(self):
self.assertArgs(["interface", "address", "prefix_length"])
xpath = "/interfaces/interface[name=%s]" % self.interface
_json_value = json.loads(pybindJSON.dumps(self.iface, mode='ietf'))
schema.fixSubifIndex(_json_value)
self.assertTrue(self.gNMISetUpdate(xpath, _json_value),
"gNMI Set did not succeed.")
def CycleChannels(ap, radio_obj, five_g=True, width=20):
"""Cycles through all available channels.
Channels are set on the object and config is sent to the AP. Config leaf is
then verified, followed by comparing all values in the state leaf vs config.
It takes roughly ~50 secs per channel or ~22 minutes for all 20MHz. Varies
per vendor.
Args:
ap: (object) chido_test.ApObject containing all AP attributes.
radio_obj: (YANGBaseClass) OC radio container object.
five_g: (bool) Whether target is 5GHz radio.
width: (int) Channel width, eg. 20, 40, 80.
"""
ap.radio_id = '0' if five_g else '1'
ap.radio_freq = 'FREQ_5GHZ' if five_g else 'FREQ_2GHZ'
path = _GetPathByContainer(ap, 'radios')
channels = _GetChannelSet(five_g, width)
for channel in channels:
logging.info('Setting radio id %s to channel %s', ap.radio_id, channel)
if not five_g:
radio_obj.id = ap.radio_id
radio_obj.operating_frequency = ap.radio_freq
radio_obj.channel_width = width
radio_obj.channel = channel
radio_obj.id = ap.radio_id
json_str = pybindJSON.dumps(radio_obj, mode='ietf')
SetConfig(ap, xpath=path, json_str=json_str)
_VerifyRadioContainer(ap, radio_obj, five_g)
def _rpc_worker(self,
operation_type=None,
pybind_object=None,
resource_depth=None,
timeout=''):
"""
This is an auto-generated method for the PySwitchLib.
"""
rest_operation = 'POST'
rest_uri = pybind_object._rest_uri_for_post()
rest_data = ''
rest_commands = []
if rest_uri == '/':
rest_uri = pybind_object._rest_uri()
label_list_items = lambda x: x
pybind_object = pybind_object._parent
rest_data = dicttoxml(json.loads(pybindJSON.dumps(pybind_object,
mode='rest'),
object_pairs_hook=OrderedDict),
root=False,
attr_type=False,
item_func=label_list_items)
rest_commands.append(
[rest_operation, rest_uri, rest_data, 'rpc', resource_depth])
return (rest_commands, '', timeout)
def test_006_ietf_deserialise(self):
root = self.path_helper.get_unique("/")
fh = open(os.path.join(os.path.dirname(__file__), "json", "06-deserialise-ietf.json"), 'r')
pybindJSONDecoder.load_ietf_json(json.load(fh), None, None, obj=root)
v = json.loads(pbJ.dumps(self.path_helper.get_unique("/"), mode="ietf"))
x = json.load(open(os.path.join(os.path.dirname(__file__), "json", "06-deserialise-ietf.json"), 'r'))
self.assertEqual(v, x)
def test_005_deserialise(self):
root = self.path_helper.get_unique("/")
fh = open(os.path.join(this_dir, "json", "05-deserialise.json"), 'r')
pybindJSONDecoder.load_json(json.load(fh), None, None, obj=root)
v = json.loads(pbJ.dumps(self.path_helper.get_unique("/")))
x = json.load(open(os.path.join(this_dir, "json", "05-deserialise.json"), 'r'))
self.assertEqual(v, x)
def CycleTransmitPowers(ap, radio_obj, power_levels, five_g=True):
"""Cycles through the given power_levels.
Powers are set on the object and config is sent to the AP. Config leaf is
then verified, followed by comparing all values in the state leaf vs config.
Args:
ap: (object) chido_test.ApObject containing all AP attributes.
radio_obj: (YANGBaseClass) OC radio container object.
power_levels: (list) integers representing the radio transmit-power.
five_g: (bool) Whether target is 5GHz radio.
"""
ap.radio_id = '0' if five_g else '1'
ap.radio_freq = 'FREQ_5GHZ' if five_g else 'FREQ_2GHZ'
path = _GetPathByContainer(ap, 'radios')
for power in power_levels:
logging.info('Setting radio id %s to transmit-power %s', ap.radio_id,
power)
if not five_g:
radio_obj.id = ap.radio_id
radio_obj.operating_frequency = ap.radio_freq
radio_obj.transmit_power = power
json_str = pybindJSON.dumps(radio_obj, mode='ietf')
SetConfig(ap, xpath=path, json_str=json_str)
logging.info('Sent power of %s as %s to %s', power, json_str, path)
_VerifyRadioContainer(ap, radio_obj, five_g)
def pyangbind_validation(self, item, data, force=False):
try:
if item == "vnfds":
myvnfd = vnfd_im()
pybindJSONDecoder.load_ietf_json(
{'vnfd:vnfd-catalog': {
'vnfd': [data]
}},
None,
None,
obj=myvnfd,
path_helper=True,
skip_unknown=force)
out = pybindJSON.dumps(myvnfd, mode="ietf")
elif item == "nsds":
mynsd = nsd_im()
pybindJSONDecoder.load_ietf_json(
{'nsd:nsd-catalog': {
'nsd': [data]
}},
None,
None,
obj=mynsd,
path_helper=True,
skip_unknown=force)
out = pybindJSON.dumps(mynsd, mode="ietf")
elif item == "nsts":
mynst = nst_im()
pybindJSONDecoder.load_ietf_json({'nst': [data]},
None,
None,
obj=mynst,
path_helper=True,
skip_unknown=force)
out = pybindJSON.dumps(mynst, mode="ietf")
else:
raise EngineException(
"Not possible to validate '{}' item".format(item),
http_code=HTTPStatus.INTERNAL_SERVER_ERROR)
desc_out = self._remove_envelop(yaml.safe_load(out))
return desc_out
except Exception as e:
raise EngineException("Error in pyangbind validation: {}".format(
str(e)),
http_code=HTTPStatus.UNPROCESSABLE_ENTITY)
def ConfigPhyMac(ap, student_ssids):
"""Triggers the configuration of PHY and MAC layer.
Args:
ap: AP Class object.
student_ssids: (list) SSIDs to configure on the AP.
This populates the conig object (from PyangBind, from YANG model) for day-1+
configuration.
"""
paths = gnmi_lib.ParsePath(gnmi_lib.PathNames((
'/access-points/access-point[hostname=%s]/' % ap.ap_name)))
ap_configs = access_point_configs.access_points.access_point
ap_configs.add(ap.ap_name)
open_ssid = ap_configs[ap.ap_name].ssids.ssid.add(ap.openssid)
open_ssid.config.name = ap.openssid
open_ssid.config.enabled = True
open_ssid.config.hidden = False
open_ssid.config.operating_frequency = 'FREQ_5GHZ'
open_ssid.config.opmode = 'OPEN'
open_ssid.wmm.config.trust_dscp = True
psk_ssid = ap_configs[ap.ap_name].ssids.ssid.add(ap.pskssid)
psk_ssid.config.enabled = True
psk_ssid.config.name = ap.pskssid
psk_ssid.config.hidden = False
psk_ssid.config.operating_frequency = 'FREQ_2_5_GHZ'
psk_ssid.config.opmode = 'WPA2_PERSONAL'
psk_ssid.config.wpa2_psk = 'testing123'
psk_ssid.wmm.config.trust_dscp = True
# PHY Layer stuff.
fiveg = ap_configs[ap.ap_name].radios.radio.add(0)
fiveg.config.id = 0
fiveg.config.operating_frequency = 'FREQ_5GHZ'
fiveg.config.enabled = True
fiveg.config.dca = False
fiveg.config.transmit_power = 3
fiveg.config.channel_width = 20
fiveg.config.channel = 165
twog = ap_configs[ap.ap_name].radios.radio.add(1)
twog.config.id = 1
twog.config.operating_frequency = 'FREQ_2GHZ'
twog.config.enabled = True
twog.config.dca = False
twog.config.transmit_power = 3
twog.config.channel_width = 20
twog.config.channel = 6
json_value = _int_fixer(json.loads(pybindJSON.dumps(
access_point_configs, mode='ietf', indent=2))['openconfig-access-points:access-points']['access-point'][0])
if FLAGS.dry_run:
print('Here\'s the JSON that was created, for sending to the Target:')
print('*'*25, '\n\n', json.dumps(json_value, indent=2),'\n\n', '*'*25)
print('JSON written as dry_run_configs.json')
f = six.moves.builtins.open('dry_run_configs.json', 'w')
f.write(json.dumps(json_value, indent=2) + '\n')
sys.exit()
else:
r = gnmi_lib.Set(ap.stub, paths, ap.targetuser, ap.targetpass, json_value, 'update')
print('Configuration succesfull, with the following gNMI SetResponse:\n', r)
return json.dumps(json_value)
def test_serialise_container(self):
self.serialise_obj.two.string_test = "twenty-two"
with open(os.path.join(os.path.dirname(__file__), "json", "container.json"), 'r') as fp:
self.assertEqual(
json.loads(dumps(self.yang_helper.get("/two")[0])),
json.load(fp),
"Invalid output returned when serialising a container."
)
def test_006_ietf_deserialise(self):
root = self.path_helper.get_unique("/")
with open(os.path.join(os.path.dirname(__file__), "json", "06-deserialise-ietf.json"), 'r') as fp:
pybindJSONDecoder.load_ietf_json(json.load(fp), None, None, obj=root)
v = json.loads(pbJ.dumps(self.path_helper.get_unique("/"), mode="ietf"))
with open(os.path.join(os.path.dirname(__file__), "json", "06-deserialise-ietf.json"), 'r') as fp:
x = json.load(fp)
self.assertEqual(v, x)
def test_example_vnf_bds_dump_json(self):
example_vnf_bds = os.listdir(EXAMPLE_DIR)
# check each vnf_bd file against the model
print("Validating: {} VNF-BD files.".format(len(example_vnf_bds)))
for ep in example_vnf_bds:
parsed_vnfbd = check_against_model(os.path.join(EXAMPLE_DIR, ep))
print(pybindJSON.dumps(parsed_vnfbd))
self.assertIsNotNone(parsed_vnfbd)
def test_serialise_container(self):
self.serialise_obj.two.string_test = "twenty-two"
with open(os.path.join(os.path.dirname(__file__), "json", "container.json"), "r") as fp:
self.assertEqual(
json.loads(dumps(self.yang_helper.get("/two")[0])),
json.load(fp),
"Invalid output returned when serialising a container.",
)
def convertToYangJsonStr(jsonObj):
equipdata = jsonObj['equipmentDtlData']
for equipment in equipdata['equipmentLst']:
for equipmentContainer in equipment['equipmentContainer']:
for virtualNE in equipmentContainer['virtualNE']:
for equipTag in virtualNE:
if (type(virtualNE[equipTag]) == list):
walkList(virtualNE[equipTag], equipTag)
return (pybindJSON.dumps(op))
def Get_LispAddress_Noeid_JSON(eid_string, vni=None):
""" Description: Returns lisp address dictionary
Returns: python dictionary
Params:
eid_string: type of lisp address
vni: virtual network id
"""
out_dump = pbJ.dumps(Get_LispAddress_Object(eid_string, vni), filter=True, mode="ietf")
return Clean_JSON(out_dump)
def test_010_filtered_json_output(self):
self.instance.bgp.global_.config.as_ = 2856
self.instance.bgp.global_.config.router_id = "192.0.2.1"
n = self.instance.bgp.neighbors.neighbor.add("192.1.1.1")
n.config.peer_as = 5400
n.config.description = "a fictional transit session"
json_out = pbj.dumps(self.instance)
testdata = open(this_dir + "/testdata/tc010.json").read()
self.assertEqual(json_out, testdata)
def test_040_unfiltered_ietf_json_output(self):
self.instance.bgp.global_.config.as_ = 2856
self.instance.bgp.global_.config.router_id = "192.0.2.1"
n = self.instance.bgp.neighbors.neighbor.add("192.1.1.1")
n.config.peer_as = 5400
n.config.description = "a fictional transit session"
json_out = pbj.dumps(self.instance, filter=False, mode="ietf")
testdata = open(this_dir + "/testdata/tc040.json").read()
self.assertEqual(json.loads(json_out), json.loads(testdata))
def test_009_presence_serialise(self):
self.instance.parent.child._set_present()
expectedJ = """
{
"parent": {
"child": {}
}
}"""
self.assertEqual(json.loads(pbJ.dumps(self.instance)), json.loads(expectedJ))
def calculate_diff(left, right, snoObject=sno()):
left_dict = json.loads(pybindJSON.dumps(left))
right_dict = json.loads(pybindJSON.dumps(right))
right_side_recursion(left_dict, right_dict)
left_after_right_recursion = snoObject
pybindJSONDecoder.load_json(left_dict, None, None, left_after_right_recursion)
left_xml = (pybindIETFXMLEncoder.serialise(left_after_right_recursion))
right_xml = (pybindIETFXMLEncoder.serialise(right))
root_left = etree.fromstring(left_xml)
root_right = etree.fromstring(right_xml)
left_side_recursion(root_left, root_right)
return (etree.tostring(root_left).decode())
def update(self, snoRoot, vars):
if self.name not in snoRoot.devices.device.keys():
raise KeyError(self.name + "not present in device list")
else:
DeviceObj = snoRoot.devices.device[self.name]
DeviceDict = json.loads(pybindJSON.dumps(DeviceObj, filter=True))
DeviceDict.update(vars)
pybindJSONDecoder.load_json(DeviceDict, None, None, DeviceObj)
return snoRoot
def serialise(self, cls_instance):
data_json = pbJ.dumps(
cls_instance,
indent=4,
filter=True,
skip_subtrees=[],
select=False,
mode="default",
)
return data_json
def make_json(yml):
model = ietf_interfaces()
for intf, conf in yml['interface'].iteritems():
print("Instantiating model for {}".format(intf))
intf_model = model.interfaces.interface.add(intf)
intf_model.description = conf['description']
ip_model = intf_model.ipv4.address.add(conf['address']['prefix'])
ip_model.netmask = conf['address']['netmask']
print("Done")
return pybindJSON.dumps(model, mode='ietf')
def test_example_demo_ports_dump_json(self):
example_demo_ports = os.listdir(EXAMPLE_DIR)
# check each demo_port file against the model
print("Validating: {} demo-port files.".format(
len(example_demo_ports)))
for ep in example_demo_ports:
parsed_demo_port = check_against_model(
os.path.join(EXAMPLE_DIR, ep))
print(pybindJSON.dumps(parsed_demo_port))
self.assertIsNotNone(parsed_demo_port)
def test_009_presence_serialise(self):
self.instance.parent.child._set_present()
expectedJ = """
{
"parent": {
"child": {}
}
}"""
self.assertEqual(json.loads(pbJ.dumps(self.instance)),
json.loads(expectedJ))
def test_030_filtered_ietf_json_output(self):
self.instance.bgp.global_.config.as_ = 2856
self.instance.bgp.global_.config.router_id = "192.0.2.1"
n = self.instance.bgp.neighbors.neighbor.add("192.1.1.1")
n.config.peer_as = 5400
n.config.description = "a fictional transit session"
json_out = pbj.dumps(self.instance, mode="ietf")
with open("{}/testdata/tc030.json".format(this_dir)) as f:
testdata = f.read()
self.assertEqual(json.loads(json_out), json.loads(testdata))
def Get_MappingAuthkey_JSON(key_string="password", key_type=1):
""" Description: Returns mapping auth key dictionary
Returns: python dictionary
Params:
key_string: key string
key_type: key type
"""
pbj_dump = pbJ.dumps(Get_MappingAuthkey_Object(key_string, key_type), filter=True, mode="default")
out_dump = '{"mapping-authkey":' + pbj_dump + '}'
return Clean_JSON(out_dump)
def Get_LispAddress_JSON(eid_string, vni=None):
""" Description: Returns lisp address dictionary with eid wrapped
Returns: python dictionary
Params:
eid_string: type of lisp address
vni: virtual network id
"""
pbj_dump = pbJ.dumps(Get_LispAddress_Object(eid_string, vni), filter=True, mode="ietf")
out_dump = '{"eid":' + pbj_dump + '}'
return Clean_JSON(out_dump)
def test_040_unfiltered_ietf_json_output(self):
self.instance.bgp.global_.config.as_ = 2856
self.instance.bgp.global_.config.router_id = "192.0.2.1"
n = self.instance.bgp.neighbors.neighbor.add("192.1.1.1")
n.config.peer_as = 5400
n.config.description = "a fictional transit session"
json_out = pbj.dumps(self.instance, filter=False, mode="ietf")
with open(os.path.join(os.path.dirname(__file__), "testdata", "tc040.json")) as fp:
testdata = fp.read()
self.assertEqual(json.loads(json_out), json.loads(testdata))
def SetContainer(ap, container, config_obj):
"""Sets a container config and verifies it based on config obj provided.
This function works where setting and verifying the container does not require
any special logic. It simply sets configuration at a container level and
verifies all the configured leafs' state. All leafs are checked against
schema.
Args:
ap: (object) chido_test.ApObject containing all AP attributes.
container: (str) a supported container within the model.
config_obj: (YANGBaseClass) OC config object matching the container.
Raises:
ConfigError: If the config leaf does not match config sent.
"""
path = _GetPathByContainer(ap, container)
json_str = pybindJSON.dumps(config_obj, mode='ietf')
SetConfig(ap, xpath=path, json_str=json_str)
expected_config = pybindJSON.dumps(config_obj, mode='ietf')
gnmi_response = GetPath(ap, path)
json_bytes = gnmi_response.notification[0].update[0].val.json_ietf_val
json_bytes = json_bytes.replace(b'openconfig-wifi-types:', b'')
retrieved_config_obj = pybindJSONDecoder.load_ietf_json(
json.loads(json_bytes), None, None, obj=config_obj)
retrieved_config = pybindJSON.dumps(retrieved_config_obj, mode='ietf')
if expected_config != retrieved_config:
logging.info('Expected:\n%s', expected_config)
logging.info('Retrieved:\n%s', retrieved_config)
raise ConfigError('Container config does not match config sent')
# Now verify the state.
path = path.replace('/config', '/state')
configured_keys = json.loads(expected_config).keys()
# We replace the 'openconfig-*' prefix in JSON to get the actual leaf names.
# TODO(xavier): Regex match prefix replace so it works for all models.
leafs = [
l.replace('openconfig-access-points:',
'').replace('openconfig-ap-manager:', '').replace('-', '_')
for l in configured_keys
]
_VerifyContainerState(ap, container, path, leafs, retrieved_config_obj)
def ExtractJson(oc_obj, leaf_str):
# sometimes leaf can not be dumped,
# so dump the parent for safe
# set filter True to filter attributes which are not configured
if hasattr(oc_obj, 'get'):
tmp_json = json.loads(pybindJSON.dumps(oc_obj, filter=True))
else:
tmp_json = json.loads(pybindJSON.dumps(oc_obj._parent, filter=True))
leaf_name = oc_obj.yang_name()
if leaf_name in tmp_json:
tmp_json = tmp_json[leaf_name]
else:
tmp_json = None
if leaf_str and leaf_str in tmp_json:
tmp_json = tmp_json[leaf_str]
return tmp_json
def Get_MappingRecord_JSON(eid, locators, ttl=1440, authoritative=True, action='NoAction'):
""" Description: Returns mapping record dictionary
Returns: python dictionary
Params:
eid: lisp address object
locators: list of locator record objects
ttl: recordTtl
authoritative: authoritative
action: action
"""
pbj_dump = pbJ.dumps(Get_MappingRecord_Object(eid, locators, ttl, authoritative, action), filter=True, mode="ietf")
out_dump = '{"mapping-record":' + pbj_dump + '}'
return Clean_JSON(out_dump)
def test_full_serialise(self):
self.serialise_obj.c1.l1.add(1)
for signed in ["int", "uint"]:
for size in [8, 16, 32, 64]:
name = "%s%s" % (signed, size)
setter = getattr(self.serialise_obj.c1.l1[1], "_set_%s" % name)
setter(1)
self.serialise_obj.c1.l1[1].restricted_integer = 6
self.serialise_obj.c1.l1[1].string = "bear"
self.serialise_obj.c1.l1[1].restricted_string = "aardvark"
self.serialise_obj.c1.l1[1].union = 16
self.serialise_obj.c1.l1[1].union_list.append(16)
self.serialise_obj.c1.l1[1].union_list.append("chicken")
self.serialise_obj.c1.t1.add(16)
self.serialise_obj.c1.t1.add(32)
self.serialise_obj.c1.l1[1].leafref = 16
self.serialise_obj.c1.l1[1].binary = bitarray("010101")
self.serialise_obj.c1.l1[1].boolean = True
self.serialise_obj.c1.l1[1].enumeration = "one"
self.serialise_obj.c1.l1[1].identityref = "idone"
self.serialise_obj.c1.l1[1].typedef_one = "test"
self.serialise_obj.c1.l1[1].typedef_two = 8
self.serialise_obj.c1.l1[1].one_leaf = "hi"
for i in range(1, 5):
self.serialise_obj.c1.l1[1].ll.append(six.text_type(i))
self.serialise_obj.c1.l1[1].next_hop.append("DROP")
self.serialise_obj.c1.l1[1].next_hop.append("192.0.2.1")
self.serialise_obj.c1.l1[1].next_hop.append("fish")
self.serialise_obj.c1.l1[1].typedef_decimal = Decimal("21.21")
self.serialise_obj.c1.l1[1].range_decimal = Decimal("4.44443322")
self.serialise_obj.c1.l1[1].typedef_decimalrange = Decimal("42.42")
self.serialise_obj.c1.l1[1].decleaf = Decimal("42.4422")
for i in range(1, 10):
self.serialise_obj.c1.l2.add(i)
pybind_json = json.loads(dumps(self.serialise_obj))
with open(os.path.join(os.path.dirname(__file__), "json", "expected-output.json"), 'r') as fp:
external_json = json.load(fp)
self.assertEqual(pybind_json, external_json, "JSON did not match expected output.")
def test_json_generation(self):
json_dir = os.path.join(os.path.dirname(__file__), 'json')
for file_name in os.listdir(json_dir):
with self.subTest(json_file=file_name), open(os.path.join(json_dir, file_name), 'r') as file_handle:
parameters = regex.sub(
'interfaces\_ph:(?P<pathhelper>[a-zA-Z]+)\-flt:(?P<filter>[a-zA-Z]+)\-m:(?P<mode>[a-zA-Z]+)\.json',
'\g<pathhelper>||\g<filter>||\g<mode>', file_name
).split("||")
path_helper, config_filter, mode = YANGBool(parameters[0]), YANGBool(parameters[1]), parameters[2]
if path_helper:
instance = self.ocbind.openconfig_interfaces(path_helper=self.yang_helper)
else:
instance = self.ocbind.openconfig_interfaces()
instance.interfaces.interface.add("eth0")
expected_json = json.load(file_handle)
actual_json = json.loads(dumps(instance, filter=bool(config_filter), mode=mode))
self.assertEqual(expected_json, actual_json, "Generated JSON did not match expected object for %s" % file_name)
for i in [(-452.6729, False), (-444.44, True), (-443.22, False),
(-330, True), (-222.21, False), (111.2, False), (111.1, True),
(446.56, True), (555.55559282, False)]:
passed = False
try:
q.container.dec64LeafWithRange = i[0]
passed = True
except ValueError, m:
pass
assert passed == i[1], \
"decimal64 leaf with range was not correctly set (%f -> %s != %s)" \
% (i[0], passed, i[1])
testdata = '''
{
"container": {
"d1": 12.34
}
}
'''
import pyangbind.lib.pybindJSON as pbj
doc = pbj.loads(testdata, bindings, 'decimal')
print pbj.dumps(doc)
if not k:
os.system("/bin/rm %s/bindings.py" % this_dir)
os.system("/bin/rm %s/bindings.pyc" % this_dir)
if __name__ == '__main__':
main()
#!/usr/bin/env python
from __future__ import print_function, unicode_literals
from rbindings.simple_rpc_rpc.test.input import input
from rbindings.simple_rpc_rpc.test.output import output
from pyangbind.lib.serialise import pybindJSONDecoder
from pyangbind.lib.pybindJSON import dumps
import pprint
import os
import json
pp = pprint.PrettyPrinter(indent=4)
# Create an input instance
rpc_input = input()
rpc_input.input_container.argument_one = "test_call"
rpc_input.input_container.argument_two = 32
print(dumps(rpc_input, mode="ietf"))
# Load an output from IETF JSON
rpc_output = output()
fn = os.path.join("json", "rpc-output.json")
json_obj = json.load(open(fn, "r"))
pybindJSONDecoder.load_ietf_json(json_obj, None, None, obj=rpc_output)
print(rpc_output.response_id)
pp.pprint(rpc_output.get(filter=True))
# Load an instance from an IETF-JSON string
string_to_load = open(os.path.join('json', 'simple-instance-ietf.json'), 'r')
string_to_load = string_to_load.read().replace('\n', '')
loaded_ietf_obj_two = pbJ.loads_ietf(string_to_load, sbindings,
"simple_serialise")
pp.pprint(loaded_ietf_obj_two.get(filter=True))
# Load into an existing instance
from pyangbind.lib.serialise import pybindJSONDecoder
import json
# Create a new instance
existing_instance = sbindings.simple_serialise()
existing_instance.a_list.add("entry-one")
existing_instance.a_list.add("entry-two")
fn = os.path.join("json", "simple-instance-additional.json")
data_to_load = json.load(open(fn, 'r'))
pybindJSONDecoder.load_json(data_to_load, None, None, obj=existing_instance)
pp.pprint(existing_instance.a_list.keys())
pp.pprint(existing_instance.get(filter=True))
# Serialise objects to JSON
print(pbJ.dumps(existing_instance, filter=True))
print(pbJ.dumps(existing_instance, filter=True, mode="ietf"))
print(pbJ.dumps(existing_instance.a_list, select={'the-key': 'entry-one'}))
print(pbJ.dumps(existing_instance.a_list, select={'the-key': 'entry-one'},
mode="ietf"))
lrecord_obj[loc_id].localLocator = flags % 10
lrecord_obj[loc_id].rlocProbed = (flags / 10) % 10
lrecord_obj[loc_id].routed = (flags / 100) % 10
return lrecord_obj
def Get_LocatorRecord_JSON(rloc, weights='1/1/255/0', flags=001, loc_id="ISP1"):
""" Description: Returns locator record dictionary
Returns: python dictionary
Params:
rloc: eid_string for lisp address object
weights: priority/weight/multicastPriority/multicastWeight
flags: Three bit parameter in the sequence routed->rlocProbed->routed
loc_id: id of locator record object
"""
pbj_dump = pbJ.dumps(Get_LocatorRecord_Object(rloc, weights, flags, loc_id), filter=True, mode="default")
pbj_dict = json.loads(pbj_dump)
pbj_dict[loc_id]['rloc'] = Get_LispAddress_Noeid_JSON(rloc)
out_dump = '{"LocatorRecord":' + str(pbj_dict) + '}'
return Clean_JSON(out_dump)
def Get_MappingRecord_Object(eid, locators, ttl=1440, authoritative=True, action='NoAction'):
""" Description: Returns mapping record object from pyangbind generated classes.
Returns: mapping record object
Params:
eid: lisp address object
locators: list of locator record objects
ttl: recordTtl
authoritative: authoritative
action: action
def main():
try:
opts, args = getopt.getopt(sys.argv[1:], "k", ["keepfiles"])
except getopt.GetoptError as e:
print str(e)
sys.exit(127)
k = False
for o, a in opts:
if o in ["-k", "--keepfiles"]:
k = True
pythonpath = os.environ.get("PATH_TO_PYBIND_TEST_PYTHON") if \
os.environ.get('PATH_TO_PYBIND_TEST_PYTHON') is not None \
else sys.executable
pyangpath = os.environ.get('PYANGPATH') if \
os.environ.get('PYANGPATH') is not None else False
pyangbindpath = os.environ.get('PYANGBINDPATH') if \
os.environ.get('PYANGBINDPATH') is not None else False
assert pyangpath is not False, "could not find path to pyang"
assert pyangbindpath is not False, "could not resolve pyangbind directory"
this_dir = os.path.dirname(os.path.realpath(__file__))
cmd = "%s " % pythonpath
cmd += "%s --plugindir %s/pyangbind/plugin" % (pyangpath, pyangbindpath)
cmd += " -f pybind -o %s/bindings.py" % this_dir
cmd += " -p %s" % this_dir
cmd += " --use-xpathhelper"
cmd += " %s/%s.yang" % (this_dir, TESTNAME)
os.system(cmd)
from bindings import json_serialise
from bitarray import bitarray
from pyangbind.lib.xpathhelper import YANGPathHelper
y = YANGPathHelper()
js = json_serialise(path_helper=y)
js.c1.l1.add(1)
for s in ["int", "uint"]:
for l in [8, 16, 32, 64]:
name = "%s%s" % (s, l)
x = getattr(js.c1.l1[1], "_set_%s" % name)
x(1)
js.c1.l1[1].restricted_integer = 6
js.c1.l1[1].string = "bear"
js.c1.l1[1].restricted_string = "aardvark"
js.c1.l1[1].union = 16
js.c1.l1[1].union_list.append(16)
js.c1.l1[1].union_list.append("chicken")
js.c1.t1.add(16)
js.c1.t1.add(32)
js.c1.l1[1].leafref = 16
js.c1.l1[1].binary = bitarray("010101")
js.c1.l1[1].boolean = True
js.c1.l1[1].enumeration = "one"
js.c1.l1[1].identityref = "idone"
js.c1.l1[1].typedef_one = "test"
js.c1.l1[1].typedef_two = 8
js.c1.l1[1].one_leaf = "hi"
for i in range(1, 5):
js.c1.l1[1].ll.append(unicode(i))
js.c1.l1[1].next_hop.append("DROP")
js.c1.l1[1].next_hop.append("192.0.2.1")
js.c1.l1[1].next_hop.append("fish")
js.c1.l1[1].typedef_decimal = Decimal("21.21")
js.c1.l1[1].range_decimal = Decimal("4.44443322")
js.c1.l1[1].typedef_decimalrange = Decimal("42.42")
js.c1.l1[1].decleaf = Decimal("42.4422")
for i in range(1, 10):
js.c1.l2.add(i)
pybind_json = json.loads(dumps(js))
external_json = json.load(open(os.path.join(this_dir, "json",
"expected-output.json"), 'r'))
assert pybind_json == external_json, "JSON did not match the expected output"
yph = YANGPathHelper()
new_obj = json_serialise(path_helper=yph)
new_obj.two.string_test = "twenty-two"
assert json.loads(dumps(yph.get("/two")[0])) == \
json.load(open(os.path.join(this_dir, "json", "container.json"), 'r')), \
"Invalid output returned when serialising a container"
if not k:
os.system("/bin/rm %s/bindings.py" % this_dir)
os.system("/bin/rm %s/bindings.pyc" % this_dir)
pp.pprint(loaded_ietf_obj.get(filter=True))
# Load an instance from an IETF-JSON string
string_to_load = open(os.path.join("json", "simple-instance-ietf.json"), "r")
string_to_load = string_to_load.read().replace("\n", "")
loaded_ietf_obj_two = pbJ.loads_ietf(string_to_load, sbindings, "simple_serialise")
pp.pprint(loaded_ietf_obj_two.get(filter=True))
# Load into an existing instance
from pyangbind.lib.serialise import pybindJSONDecoder
import json
# Create a new instance
existing_instance = sbindings.simple_serialise()
existing_instance.a_list.add("entry-one")
existing_instance.a_list.add("entry-two")
fn = os.path.join("json", "simple-instance-additional.json")
data_to_load = json.load(open(fn, "r"))
pybindJSONDecoder.load_json(data_to_load, None, None, obj=existing_instance)
pp.pprint(existing_instance.a_list.keys())
pp.pprint(existing_instance.get(filter=True))
# Serialise objects to JSON
print(pbJ.dumps(existing_instance, filter=True))
print(pbJ.dumps(existing_instance, filter=True, mode="ietf"))
print(pbJ.dumps(existing_instance.a_list, select={"the-key": "entry-one"}))
print(pbJ.dumps(existing_instance.a_list, select={"the-key": "entry-one"}, mode="ietf"))
def test_roundtrip_simple(self):
self.rt_obj.a.idref = "VALUE_TWO"
j = pbJ.dumps(self.rt_obj)
pbS.pybindJSONDecoder.load_json(json.loads(j), None, None, obj=self.rt_obj)
for nhop in [(0, "192.168.0.1"), (1, "10.0.0.1")]:
nh = rt.next_hops.next_hop.add(nhop[0])
nh.config.next_hop = nhop[1]
# Iterate through the next-hops added
for index, nh in rt.next_hops.next_hop.iteritems():
print("%s: %s" % (index, nh.config.next_hop))
# Try and set an invalid tag type
try:
rt.config.set_tag = "INVALID-TAG"
except ValueError as m:
print("Cannot set tag: %s" % m)
# Dump the entire instance as JSON in PyangBind format
print(pybindJSON.dumps(oclr))
# Dump the static routes instance as JSON in IETF format
print(pybindJSON.dumps(oclr.local_routes, mode="ietf"))
# Load the "json/oc-lr.json" file into a new instance of
# "openconfig_local_routing". We import the module here, such that a new
# instance of the class can be created by the deserialisation code
import binding
new_oclr = pybindJSON.load(os.path.join("json", "oc-lr.json"), binding,
"openconfig_local_routing")
# Manipulate the data loaded
print("Current tag: %d" %
new_oclr.local_routes.static_routes.static[u"192.0.2.1/32"].config.set_tag)
new_oclr.local_routes.static_routes.static[u"192.0.2.1/32"].config.set_tag \
def main():
try:
opts, args = getopt.getopt(sys.argv[1:], "k", ["keepfiles"])
except getopt.GetoptError as e:
print str(e)
sys.exit(127)
k = False
for o, a in opts:
if o in ["-k", "--keepfiles"]:
k = True
pythonpath = os.environ.get("PATH_TO_PYBIND_TEST_PYTHON") if \
os.environ.get('PATH_TO_PYBIND_TEST_PYTHON') is not None \
else sys.executable
pyangpath = os.environ.get('PYANGPATH') if \
os.environ.get('PYANGPATH') is not None else False
pyangbindpath = os.environ.get('PYANGBINDPATH') if \
os.environ.get('PYANGBINDPATH') is not None else False
assert pyangpath is not False, "could not find path to pyang"
assert pyangbindpath is not False, "could not resolve pyangbind directory"
OC = "https://raw.githubusercontent.com/openconfig/" + \
"public/master/release/models/"
RFC = "https://raw.githubusercontent.com/robshakir/" + \
"yang/master/standard/ietf/RFC/"
FETCH_FILES = [
(OC + "openconfig-extensions.yang", "include"),
(OC + "openconfig-types.yang", "include"),
(OC + "interfaces/openconfig-interfaces.yang", "openconfig"),
(RFC + "ietf-inet-types.yang", "include"),
(RFC + "ietf-yang-types.yang", "include"),
]
this_dir = os.path.dirname(os.path.realpath(__file__))
del_dirs = []
for fn in FETCH_FILES:
wrdir = os.path.join(this_dir, fn[1])
if not os.path.exists(wrdir):
os.mkdir(wrdir)
if wrdir not in del_dirs:
del_dirs.append(wrdir)
wrpath = os.path.join(this_dir, fn[1], fn[0].split("/")[-1])
if not os.path.exists(wrpath):
got = False
count = 0
for i in range(0,4):
response = requests.get(fn[0])
if response.status_code != 200:
time.sleep(2)
else:
got = True
f = open(wrpath, 'w')
f.write(response.content)
f.close()
break
assert got is True, "Could not get file %s from GitHub (response: %s)" \
% (response.status_code, fn[0])
files_str = " ".join([os.path.join(this_dir, "openconfig", i) for i in
os.listdir(os.path.join(this_dir, "openconfig"))])
cmd = "%s " % pythonpath
cmd += "%s --plugindir %s/pyangbind/plugin" % (pyangpath, pyangbindpath)
cmd += " -f pybind --split-class-dir %s/ocbind" % this_dir
cmd += " -p %s" % this_dir
cmd += " -p %s" % os.path.join(this_dir, "include")
cmd += " --use-xpathhelper "
cmd += files_str
os.system(cmd)
from ocbind import openconfig_interfaces
for fn in os.listdir(os.path.join(this_dir, "json")):
jobj = json.load(open(os.path.join(this_dir, "json", fn), 'r'))
parameters = re.sub('interfaces\_ph:(?P<pathhelper>[a-zA-Z]+)\-flt:(?P<filter>[a-zA-Z]+)\-m:(?P<mode>[a-zA-Z]+)\.json',
'\g<pathhelper>||\g<filter>||\g<mode>', fn).split("||")
path_helper,filter,mode = YANGBool(parameters[0]), YANGBool(parameters[1]), parameters[2]
if path_helper:
ph = YANGPathHelper()
i = openconfig_interfaces(path_helper=ph)
else:
i = openconfig_interfaces()
i.interfaces.interface.add("eth0")
jstr = json.loads(dumps(i, filter=bool(filter), mode=mode))
assert jstr == jobj, "Generated JSON did not match expected object for %s" % fn \
+ " %s != %s" % (jstr, jobj)
passed = True
try:
jstr = json.loads(json.dumps(pybindIETFJSONEncoder.generate_element(i), cls=pybindIETFJSONEncoder))
except Exception as e:
passed = False
assert passed, "Serialisation test for object with pybindIETFJSONEncoder threw an error"
jstr = json.loads(json.dumps(i, cls=pybindJSONEncoder))
print jstr
if not k:
del_dirs.append(os.path.join(this_dir, "ocbind"))
for dirname in del_dirs:
for root, dirs, files in os.walk(os.path.join(dirname), topdown=False):
for name in files:
os.remove(os.path.join(root, name))
for name in dirs:
os.rmdir(os.path.join(root, name))
os.rmdir(dirname)