def draw_map(nodes, edges):
acad = Autocad()
acad.prompt("Hello, Autocad from Python\n")
print acad.doc.Name
for edge in edges.itervalues():
p1 = APoint(nodes[edge.start_node_id].x, nodes[edge.start_node_id].y)
p2 = APoint(nodes[edge.end_node_id].x, nodes[edge.end_node_id].y)
line = acad.model.AddLine(p1, p2)
line.Color = edge.edge_class
def draw_map(nodes, edges):
acad = Autocad()
acad.prompt("Hello, Autocad from Python\n")
print acad.doc.Name
for edge in edges.itervalues():
p1 = APoint(nodes[edge.start_node_id].x, nodes[edge.start_node_id].y)
p2 = APoint(nodes[edge.end_node_id].x, nodes[edge.end_node_id].y)
line = acad.model.AddLine(p1, p2)
line.Color = edge.edge_class
def draw_points_in_layer():
acad = Autocad()
acad.prompt("Autocad from Python - Draw Points in Layer\n")
print acad.doc.Name
for i in range(8):
p1 = APoint(i*1000, 1000)
p = acad.model.AddPoint(p1)
p.Layer = "Node"
p.Color = i
def draw_points_in_layer():
acad = Autocad()
acad.prompt("Autocad from Python - Draw Points in Layer\n")
print acad.doc.Name
for i in range(8):
p1 = APoint(i * 1000, 1000)
p = acad.model.AddPoint(p1)
p.Layer = "Node"
p.Color = i
def draw():
acad = Autocad(create_if_not_exists=False)
property.get_values()
if is_closed() == False:
return tk.messagebox.showerror('Error', 'Geometry is not closed')
else:
try:
polyline = acad.model.AddPolyline(array.array('d', property.array))
acad.prompt('Drawing successful!')
except:
return tk.messagebox.showerror('Error',
'No AutoCAD instance detected')
def stack(brick_length, brick_height, hor_bricks, ver_bricks):
acad = Autocad(create_if_not_exists=True)
acad.prompt('Hello, Autocad from Python\n')
for ver_count in range(ver_bricks):
for hor_count in range(hor_bricks):
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
points = array.array("d", points)
pline = acad.model.AddLightWeightPolyline(points)
pline.Closed = True
return None
def draw_a_cloaking_mesh(self, timestamp, user_obj_id):
acad = Autocad()
acad.prompt("Autocad from Python - Draw A Cloaking Mesh\n")
print acad.doc.Name
#1. draw user locations
query_list = self.query_log.frames[timestamp] # timestamp
point_dict = {} #[obj_id] -> location
for query in query_list:
point_dict[query.obj_id] = (query.x, query.y)
acad.prompt("Autocad from Python - Draw Users in Node Layer\n")
for obj_id in self.positive_mc_set[self.user_mc_set[user_obj_id]]:
p1 = APoint(point_dict[obj_id][0], point_dict[obj_id][1])
p = acad.model.AddPoint(p1)
p.Layer = "Node"
p.Color = Color.RED
#2. draw mesh's segments
acad.prompt("Autocad from Python - Draw Users in Node Layer\n")
for seg in self.user_mesh[user_obj_id]:
p1 = APoint(seg.start_x, seg.start_y)
p2 = APoint(seg.end_x, seg.end_y)
line = acad.model.AddLine(p1, p2)
line.Layer = "Mesh"
line.Color = Color.GREEN
print "DONE"
def draw_a_cloaking_mesh(self, timestamp, user_obj_id):
acad = Autocad()
acad.prompt("Autocad from Python - Draw A Cloaking Mesh\n")
print acad.doc.Name
#1. draw user locations
query_list = self.query_log.frames[timestamp] # timestamp
point_dict = {} #[obj_id] -> location
for query in query_list:
point_dict[query.obj_id] = (query.x, query.y)
acad.prompt("Autocad from Python - Draw Users in Node Layer\n")
for obj_id in self.positive_mc_set[self.user_mc_set[user_obj_id]]:
p1 = APoint(point_dict[obj_id][0], point_dict[obj_id][1])
p = acad.model.AddPoint(p1)
p.Layer = "Node"
p.Color = Color.RED
#2. draw mesh's segments
acad.prompt("Autocad from Python - Draw Users in Node Layer\n")
for seg in self.user_mesh[user_obj_id]:
p1 = APoint(seg.start_x, seg.start_y)
p2 = APoint(seg.end_x, seg.end_y)
line = acad.model.AddLine(p1, p2)
line.Layer = "Mesh"
line.Color = Color.GREEN
print "DONE"
def test1():
#Test1: mesh testing
acad = Autocad()
acad.prompt("Hello, Autocad from Python\n")
print acad.doc.Name
p1 = APoint(0, 0)
p2 = APoint(50, 25)
for i in range(5):
text = acad.model.AddText('Hi %s!' % i, p1, 2.5)
acad.model.AddLine(p1, p2)
acad.model.AddCircle(p1, 10)
p1.y += 10
dp = APoint(10, 0)
for text in acad.iter_objects('Text'):
print('text: %s at: %s' % (text.TextString, text.InsertionPoint))
text.InsertionPoint = APoint(text.InsertionPoint) + dp
for obj in acad.iter_objects(['Circle', 'Line']):
print(obj.ObjectName)
from pyautocad import Autocad, APoint
import math
acad = Autocad()
acad.prompt("Goededag, het is tijd voor cirkels! \n")
print(acad.doc.Name)
p1 = APoint(0, 0)
p2 = APoint(50, 25)
for i in range(5):
text = acad.model.AddText('Rotterdam Engineering %s!' % i, p1, 2.5)
acad.model.AddLine(p1, p2)
acad.model.AddCircle(p1, 10)
p1.y += 10
dp = APoint(10, 0)
for text in acad.iter_objects('Text'):
print('text: %s at: %s' % (text.TextString, text.InsertionPoint))
text.InsertionPoint = APoint(text.InsertionPoint) + dp
for obj in acad.iter_objects(['Circle', 'Line']):
print(obj.ObjectName)
============================= Author = Hulunbuir & DalaiNur Email: [email protected] Last Update: 2019.07.28 14:00 ============================= ''' from pyautocad import Autocad from pyautocad import APoint import numpy as np import math import pyautocad.types # 1. 连接及库导入 acad = Autocad(create_if_not_exists=True) acad.prompt("Hello! AutoCAD from pyautocad.") print(acad.doc.Name) # 2. 创建点及直线 startPoint = APoint(5, 25) endPoint = APoint(25, 35) # z坐标可空缺，空缺时系统默认其为0，即点Pnt1在CAD中坐标为（5,25,0）； # 系统自动将各坐标转化为双精度浮点数。 LineObj = acad.model.AddLine(startPoint, endPoint) # 3. 添加多段线及样条曲线 # 3.1 添加普通多段线 pnts = [APoint(35, 35), APoint(40, 35), APoint(43, 32)] pnts = np.array([j for i in pnts for j in i], dtype=np.float) # 将各点坐标顺序变换为行数据；
from pyautocad import Autocad, APoint
import math
acad = Autocad()
acad.prompt("Hello, Autocad from Python\n")
print(acad.doc.Name)
p1 = APoint(0, 0)
p2 = APoint(50, 25)
for i in range(5):
text = acad.model.AddText('Hi %s!' % i, p1, 2.5)
acad.model.AddLine(p1, p2)
acad.model.AddCircle(p1, 10)
p1.y += 10
dp = APoint(10, 0)
for text in acad.iter_objects('Text'):
print('text: %s at: %s' % (text.TextString, text.InsertionPoint))
text.InsertionPoint = APoint(text.InsertionPoint) + dp
for obj in acad.iter_objects(['Circle', 'Line']):
print(obj.ObjectName)
import pyautocad
from pyautocad import Autocad, APoint
cad = Autocad()
cad.prompt("hello")
for text in cad.iter_objects("AcDbText"):
print(text.TextString, text.InsertionPoint)
dim_list = []
for dim_obj in cad.iter_objects("AcDbRotatedDimension"):
dim_name_all = dim_obj.TextOverride
dim_name_split = dim_name_all.split(" ")
dim_name = dim_name_split[1].rstrip(":}<>")
dim = int(dim_obj.Measurement)
dim_dic = {dim_name: dim}
dim_list.append(dim_dic)
print(dim_list)
## print("OK")
## for i in range(p):
## node=int(input("Node No.: "))
## n[node-1].fx=-1.0
## n[node-1].fy=-1.0
## n[node-1].mz=-1.0
## n[node-1].disx=0.0
## n[node-1].disy=0.0
## n[node-1].s='f'
## unconstrained.remove(node-1)
## constrained.append(node-1)
###################################################################
acad = Autocad(create_if_not_exists=True)
acad.prompt(
"Please open AutoCAD and create a new file to view your structure, press Enter when done\n"
)
input()
print(acad.doc.Name)
sc = lavg / 10
#####################################################
LayerObj = acad.ActiveDocument.Layers.Add("Node no.")
acad.ActiveDocument.ActiveLayer = LayerObj
ClrNum = 150 #blue
LayerObj.color = ClrNum
for i in range(len(n)):
p1 = APoint(n[i].x, n[i].y)
text = acad.model.AddText('N%s' % (i + 1), p1, .5 * sc)
#####################################################
LayerObj = acad.ActiveDocument.Layers.Add("Members")
acad.ActiveDocument.ActiveLayer = LayerObj
def flemish(brick_length, brick_height, hor_bricks, ver_bricks):
acad = Autocad(create_if_not_exists=True)
acad.prompt('Hello, Autocad from Python\n')
ver_count = 0
while ver_count < ver_bricks:
hor_count = 0
hor_count2 = 1
if (ver_count + 1) % 2 == 0:
hor_count3 = hor_bricks + 1
if hor_bricks % 2 != 0:
hor_count3 +=1
else:
hor_count3 = hor_bricks
while hor_count2 <= hor_count3:
# Bottom course
if ver_count == 0:
if hor_count2 % 2 == 0:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.5
hor_count2 += 1
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length*1/4, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
hor_count2 += 1
# Top course
elif ver_count == ver_bricks - 1:
if ver_bricks % 2 == 0:
if hor_bricks % 2 == 0:
if hor_count == 0:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.25
hor_count2 += 1
elif hor_count2 == hor_bricks + 1:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.75
hor_count2 += 1
else:
if hor_count2 % 2 == 0:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.5
hor_count2 += 1
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length*1/4, ver_count*brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
hor_count2 += 1
else:
if hor_count == 0 or hor_count2 == (hor_bricks + 2):
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.25
hor_count2 += 1
else:
if hor_count2 % 2 == 0:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.5
hor_count2 += 1
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length*1/4, ver_count*brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
hor_count2 += 1
else:
if hor_count2 % 2 == 0:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.5
hor_count2 += 1
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length*1/4, ver_count*brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
hor_count2 += 1
# Rest of courses
else:
if ver_count != ver_bricks - 1 and (ver_count + 1) % 2 == 0:
if hor_bricks % 2 == 0:
if hor_count == 0:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.25
hor_count2 += 1
elif hor_count2 == hor_bricks + 1:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.75
hor_count2 += 1
else:
if hor_count2 % 2 == 0:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.5
hor_count2 += 1
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length*1/4, ver_count*brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length*1/4, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
hor_count2 += 1
else:
if hor_count == 0 or hor_count2 == (hor_bricks + 2):
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height,
hor_count*brick_length + brick_length/4, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.25
hor_count2 += 1
else:
if hor_count2 % 2 == 0:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.5
hor_count2 += 1
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length*1/4, ver_count*brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length*1/4, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
hor_count2 += 1
else:
if hor_count2 % 2 == 0:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.5
hor_count2 += 1
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length*1/4, ver_count*brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length*3/4, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length*1/4, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
hor_count2 += 1
points = array.array("d", points)
pline = acad.model.AddLightWeightPolyline(points)
pline.Closed = True
ver_count += 1
return None
def test():
acad = Autocad(create_if_not_exists=True)
acad.prompt("Hello, Autocad from Python\n")
print(acad.doc.Name)
def running(brick_length, brick_height, hor_bricks, ver_bricks):
acad = Autocad(create_if_not_exists=True)
acad.prompt('Hello, Autocad from Python\n')
ver_count = 0
while ver_count < ver_bricks:
hor_count = 0
while hor_count < hor_bricks:
# Bottom course
if ver_count == 0:
points = [
hor_count*brick_length, 0,
hor_count*brick_length + brick_length, 0,
hor_count*brick_length + brick_length, brick_height,
hor_count*brick_length + brick_length/2, brick_height,
hor_count*brick_length, brick_height,
]
hor_count += 1
# Top course
elif ver_count == ver_bricks - 1:
if ver_bricks % 2 == 0:
if hor_count == 0 or hor_count == hor_bricks - 0.5:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.5
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
# Rest of courses
else:
if ver_count != ver_bricks - 1 and (ver_count + 1) % 2 == 0:
if hor_count == 0 or hor_count == hor_bricks - 0.5:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 0.5
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
else:
points = [
hor_count*brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height,
hor_count*brick_length + brick_length, ver_count*brick_height + brick_height,
hor_count*brick_length + brick_length/2, ver_count*brick_height + brick_height,
hor_count*brick_length, ver_count*brick_height + brick_height,
]
hor_count += 1
points = array.array("d", points)
pline = acad.model.AddLightWeightPolyline(points)
pline.Closed = True
ver_count += 1
return None
def autocadsign(atype,filedirection,linedata,datedata=None,atype_date=None,Height=None):
if atype_date==None:
atype_date=' '
if Height==None:
Height=[400,300]
# linedata[0]=[[x1,x2],[y1,y2]]
movesize=[int(linedata[0][0][0]),int(linedata[0][1][0])] #1:100 move toward right is positive
atype_movesize=[int(linedata[0][0][1]),int(linedata[0][1][1])]
signloc=[]
for i in linedata[1]:
signloc.append(int(i)-1)
# 标准1:100图框，五个模式分别对应五个位置
if datedata:
mode1={'A3':(30150,3420),'A2':(47080,3920),'A1':(71560,3920),'A0':(106580,3920)}
mode2={'A3':(25460,1320),'A2':(42580,1820),'A1':(67060,1820),'A0':(101850,1820)}
mode3={'A3':(25460,2020),'A2':(42580,2520),'A1':(67060,2520),'A0':(101850,2520)}
mode4={'A3':(25460,2720),'A2':(42580,3220),'A1':(67060,3220),'A0':(101850,3220)}
mode5={'A3':(25460,3420),'A2':(42580,3920),'A1':(67060,3920),'A0':(101850,3920)}
else:
mode1={'A3':(30450,3420),'A2':(47380,3920),'A1':(71860,3920),'A0':(106880,3920)}
mode2={'A3':(25760,1320),'A2':(42880,1820),'A1':(67360,1820),'A0':(102150,1820)}
mode3={'A3':(25760,2020),'A2':(42880,2520),'A1':(67360,2520),'A0':(102150,2520)}
mode4={'A3':(25760,2720),'A2':(42880,3220),'A1':(67360,3220),'A0':(102150,3220)}
mode5={'A3':(25760,3420),'A2':(42880,3920),'A1':(67360,3920),'A0':(102150,3920)}
atype_mode1 = {'A3': (34000, 8150), 'A2': (50900, 8650), 'A1': (75600, 8650), 'A0': (110400, 8650)}
atype_mode2 = {'A3': (35500, 8150), 'A2': (52400, 8650), 'A1': (77100, 8650), 'A0': (111900, 8650)}
atype_mode3 = {'A3': (37000, 8150), 'A2': (53900, 8650), 'A1': (78600, 8650), 'A0': (113400, 8650)}
atype_mode4 = {'A3': (38500, 8150), 'A2': (55400, 8650), 'A1': (80100, 8650), 'A0': (114900, 8650)}
atype_mode5 = {'A3': (40000, 8150), 'A2': (56900, 8650), 'A1': (81600, 8650), 'A0': (116400, 8650)}
middlemode=[mode1,mode2,mode3,mode4,mode5]
atype_middlemode=[atype_mode1,atype_mode2,atype_mode3,atype_mode4,atype_mode5]
number=len(signloc)
mode=[]
atype_mode=[]
filepath=[]
for i in range(number):
filepathloc=os.path.join(filedirection,'signfile\\'+linedata[2][i]+".dwg")
filepath.append(filepathloc)
mode.append(middlemode[signloc[i]])
atype_mode.append(atype_middlemode[signloc[i]])
acad = Autocad(create_if_not_exists=False)
acad.prompt("Hello, Autocad\n")
# print(acad.doc.Name)
Layerobj = acad.ActiveDocument.Layers.Add("CADSIGN")
if atype:
acad.ActiveDocument.ActiveTextStyle = acad.ActiveDocument.TextStyles.Item('standard')
acad.ActiveDocument.ActiveLayer = Layerobj
data=[]
for block in acad.iter_objects('Block'):
blockname=block.name[0:2]
if blockname in ['A0','A1','A2','A3']:
data.append((blockname,block.InsertionPoint[0],block.InsertionPoint[1],block.XScaleFactor))
cadnumber=len(data)
for i in range(number):
for j in range(cadnumber):
block=data[j][0]
scale=data[j][3]/100
# data[j]是图框的左下角坐标
# mode[i]是哪个位置的签名，block是每个图框下需要移动的位置
x=data[j][1]+(mode[i][block][0]+movesize[0])*scale
y=data[j][2]+(mode[i][block][1]+movesize[1])*scale
p1=APoint(x,y)
acad.model.InsertBlock(p1, filepath[i], scale,scale,scale, 0)
if datedata:
x2=x+1200*scale
p2=APoint(x2,y)
acad.model.AddText(datedata[i],p2,200*scale)
if atype:
x3=data[j][1]+(atype_mode[i][block][0]+400+atype_movesize[0])*scale
y3=data[j][2]+(atype_mode[i][block][1]+atype_movesize[1])*scale
p3=APoint(x3,y3)
x4=x3-100*scale
y4=y3-400*scale
p4=APoint(x4,y4)
# linedata[2]是需要签名的名字
acad.model.AddText(NAMETABLE_REVERSE[linedata[2][i]], p3, Height[0]* scale)
acad.model.AddText(atype_date, p4, Height[1] * scale)
acad.prompt("Autosign Successfully\n")
from pyautocad import Autocad, APoint
acad = Autocad()
acad.prompt("Hello, Autocad from Python\n")
#raise
print(acad.doc.Name)
p1 = APoint(0, 0)
p2 = APoint(50, 25)
for i in range(5):
text = acad.model.AddText('Hi %s!' % i, p1, 2.5)
acad.model.AddLine(p1, p2)
acad.model.AddCircle(p1, 10)
p1.y += 10
for text in acad.iter_objects('Text'):
print("H")
# dp = APoint(10, 0)
# for text in acad.iter_objects('Text'):
# print('text: %s at: %s' % (text.TextString, text.InsertionPoint))
# text.InsertionPoint = APoint(text.InsertionPoint) + dp
#
# for obj in acad.iter_objects(['Circle', 'Line']):
# print(obj.ObjectName)
0.1.0 (2012-03-23)
+++++++++++++++++++
* initial PyPI release
"""
from pyautocad import Autocad, APoint, ACAD, aDouble
from pyautocad.contrib.tables import Table
from pyautocad.types import distance
# 自动连接上cad，只要cad是开着的，就创建了一个<pyautocad.api.Autocad> 对象。这个对象连接最近打开的cad文件。
# 如果此时还没有打开cad，将会创建一个新的dwg文件，并自动开启cad软件（贴心）
acad = Autocad(create_if_not_exists=True)
# 用来在cad控制台中打印文字
acad.prompt('Hello, Autocad from Python\n')
# acad.doc.Name储存着cad最近打开的图形名
print(acad.doc.Name)
'''
文字 AcDbText
多行文字 AcDbMText
点 AcDbPoint
直线 AcDbLine
多段线 AcDbPolyline
三维多段线 AcDb3dPolyline
圆 AcDbCircle
圆弧 AcDbArc
椭圆 AcDbEllipse
def launch_autocad(path):
app = Autocad(create_if_not_exists=True)
app.Application.Documents.Open(path)
app.prompt('Hello, Autocad from Python\n')
print(app.doc.Name)
return app
from pyautocad import Autocad, APoint
acad = Autocad(create_if_not_exists=True)
# acad.prompt() 用来在cad控制台中打印文字
acad.prompt("Hello, aautocad from Python")
# p1=APoint(0,0)
# p2=APoint(100,0)
# p3=APoint(140,30)
# p4=APoint(140,0)
# p5=APoint(240,0)
#
# acad.model.AddLine(p1, p2)
# acad.model.AddLine(p2, p3)
# acad.model.AddLine(p4, p5)
import xlrd
workxls = xlrd.open_workbook("D:\负荷定义.xlsx")
worksheet = workxls.sheet_by_name("Sheet1")
row = worksheet.nrows # 总行数
file_related_list = []
for i in range(row):
if i == 0:
pass
else:
rowdata = worksheet.row_values(i) # i行的list
file_related_list.append(rowdata)
for i in file_related_list:
i.append(round(i[2] / i[1], 2))
if i[3] < 1:
i.append(1)
elif i[3] < 2:
def test():
acad = Autocad(create_if_not_exists=True)
acad.prompt("Hello, Autocad from Python\n")
acad.Application.LoadARX("D:\\CapolCAD\\lsp\\iWCapolPurgeIn.arx")
print(acad.doc.Name)
doc = acad.doc
#print(get_count0(doc))
#remove_count0(doc)
remove_unload_xref(doc)